API tools faq
paste
Guest User

Untitled

a guest
Jun 8th, 2018
259
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.56 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# dmesg
  2. [ 0.000000] Linux version 4.14.48 (asus@asus-System-Product-Name) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7005-0c59c9c)) #0 Thu Jun 7 13:18:55 2018
  3. [ 0.000000] Board has DDR1
  4. [ 0.000000] Analog PMU set to hw control
  5. [ 0.000000] Digital PMU set to hw control
  6. [ 0.000000] SoC Type: MediaTek MT7620N ver:2 eco:6
  7. [ 0.000000] bootconsole [early0] enabled
  8. [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
  9. [ 0.000000] MIPS: machine is Nexx WT3020 (8M)
  10. [ 0.000000] Determined physical RAM map:
  11. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  12. [ 0.000000] Initrd not found or empty - disabling initrd
  13. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  14. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  15. [ 0.000000] Zone ranges:
  16. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] Movable zone start for each node
  18. [ 0.000000] Early memory node ranges
  19. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  20. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  21. [ 0.000000] On node 0 totalpages: 16384
  22. [ 0.000000] free_area_init_node: node 0, pgdat 8043ea90, node_mem_map 81000040
  23. [ 0.000000] Normal zone: 128 pages used for memmap
  24. [ 0.000000] Normal zone: 0 pages reserved
  25. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  26. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
  27. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  28. [ 0.000000] pcpu-alloc: [0] 0
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
  30. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  31. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  34. [ 0.000000] Writing ErrCtl register=0005e000
  35. [ 0.000000] Readback ErrCtl register=0005e000
  36. [ 0.000000] Memory: 60120K/65536K available (3363K kernel code, 172K rwdata, 816K rodata, 184K init, 216K bss, 5416K reserved, 0K cma-reserved)
  37. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  38. [ 0.000000] NR_IRQS: 256
  39. [ 0.000000] CPU Clock: 580MHz
  40. [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
  41. [ 0.000000] systick: enable autosleep mode
  42. [ 0.000000] systick: running - mult: 214748, shift: 32
  43. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  44. [ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  45. [ 0.015460] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  46. [ 0.087709] pid_max: default: 32768 minimum: 301
  47. [ 0.097121] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.110137] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.128866] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  50. [ 0.148335] futex hash table entries: 256 (order: -1, 3072 bytes)
  51. [ 0.160504] pinctrl core: initialized pinctrl subsystem
  52. [ 0.171350] NET: Registered protocol family 16
  53. [ 0.202898] rt2880_gpio 10000600.gpio: registering 24 gpios
  54. [ 0.213920] rt2880_gpio 10000600.gpio: registering 24 irq handlers
  55. [ 0.226511] rt2880_gpio 10000660.gpio: registering 32 gpios
  56. [ 0.237500] rt2880_gpio 10000660.gpio: registering 32 irq handlers
  57. [ 0.250076] rt2880_gpio 10000688.gpio: registering 1 gpios
  58. [ 0.260888] rt2880_gpio 10000688.gpio: registering 1 irq handlers
  59. [ 0.276972] clocksource: Switched to clocksource systick
  60. [ 0.288612] NET: Registered protocol family 2
  61. [ 0.298028] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  62. [ 0.311793] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  63. [ 0.324391] TCP: Hash tables configured (established 1024 bind 1024)
  64. [ 0.337166] UDP hash table entries: 256 (order: 0, 4096 bytes)
  65. [ 0.348670] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  66. [ 0.361372] NET: Registered protocol family 1
  67. [ 0.369938] PCI: CLS 0 bytes, default 32
  68. [ 0.372182] rt-timer 10000100.timer: maximum frequency is 1220Hz
  69. [ 0.384852] Crashlog allocated RAM at address 0x3f00000
  70. [ 0.396477] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  71. [ 0.414778] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  72. [ 0.426266] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  73. [ 0.453779] io scheduler noop registered
  74. [ 0.461474] io scheduler deadline registered (default)
  75. [ 0.472556] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  76. [ 0.486224] console [ttyS0] disabled
  77. [ 0.493266] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
  78. [ 0.512939] console [ttyS0] enabled
  79. [ 0.526761] bootconsole [early0] disabled
  80. [ 0.543220] cacheinfo: Failed to find cpu0 device node
  81. [ 0.553485] cacheinfo: Unable to detect cache hierarchy for CPU 0
  82. [ 0.569658] spi spi0.0: force spi mode3
  83. [ 0.587034] m25p80 spi0.0: s25fl064k (8192 Kbytes)
  84. [ 0.596622] 4 fixed-partitions partitions found on MTD device spi0.0
  85. [ 0.609289] Creating 4 MTD partitions on "spi0.0":
  86. [ 0.618842] 0x000000000000-0x000000030000 : "u-boot"
  87. [ 0.629625] 0x000000030000-0x000000040000 : "u-boot-env"
  88. [ 0.641095] 0x000000040000-0x000000050000 : "factory"
  89. [ 0.652016] 0x000000050000-0x000000800000 : "firmware"
  90. [ 1.592979] 2 uimage-fw partitions found on MTD device firmware
  91. [ 1.604808] 0x000000050000-0x0000001b4364 : "kernel"
  92. [ 1.615590] 0x0000001b4364-0x000000800000 : "rootfs"
  93. [ 1.626309] mtd: device 5 (rootfs) set to be root filesystem
  94. [ 1.638880] 1 squashfs-split partitions found on MTD device rootfs
  95. [ 1.651254] 0x00000058b000-0x000000800000 : "rootfs_data"
  96. [ 1.663643] libphy: Fixed MDIO Bus: probed
  97. [ 1.676012] gsw: setting port4 to ephy mode
  98. [ 1.684414] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 link up (100Mbps/Full duplex)
  99. [ 1.702611] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link up (100Mbps/Full duplex)
  100. [ 1.721023] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
  101. [ 1.733523] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  102. [ 1.750523] rt2880_wdt 10000120.watchdog: Initialized
  103. [ 1.761941] NET: Registered protocol family 10
  104. [ 1.774230] Segment Routing with IPv6
  105. [ 1.781710] NET: Registered protocol family 17
  106. [ 1.790619] 8021q: 802.1Q VLAN Support v1.8
  107. [ 1.812883] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  108. [ 1.827976] Freeing unused kernel memory: 184K
  109. [ 1.836822] This architecture does not have kernel memory protection.
  110. [ 2.686951] random: fast init done
  111. [ 3.398167] init: Console is alive
  112. [ 3.405148] init: - watchdog -
  113. [ 6.187029] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  114. [ 6.549415] usbcore: registered new interface driver usbfs
  115. [ 6.560506] usbcore: registered new interface driver hub
  116. [ 6.571212] usbcore: registered new device driver usb
  117. [ 6.613989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  118. [ 6.636009] SCSI subsystem initialized
  119. [ 6.648727] ehci-platform: EHCI generic platform driver
  120. [ 6.669520] phy phy-usbphy.0: remote usb device wakeup disabled
  121. [ 6.681328] phy phy-usbphy.0: UTMI 16bit 30MHz
  122. [ 6.690194] ehci-platform 101c0000.ehci: EHCI Host Controller
  123. [ 6.701682] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  124. [ 6.717579] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  125. [ 6.739363] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  126. [ 6.752864] hub 1-0:1.0: USB hub found
  127. [ 6.760705] hub 1-0:1.0: 1 port detected
  128. [ 6.771947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  129. [ 6.785957] ohci-platform: OHCI generic platform driver
  130. [ 6.796709] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  131. [ 6.810306] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  132. [ 6.826190] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  133. [ 6.864192] hub 2-0:1.0: USB hub found
  134. [ 6.872089] hub 2-0:1.0: 1 port detected
  135. [ 6.887259] usbcore: registered new interface driver usb-storage
  136. [ 6.899935] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  137. [ 6.918464] init: - preinit -
  138. [ 7.847258] usb 1-1: new high-speed USB device number 2 using ehci-platform
  139. [ 8.154007] random: procd: uninitialized urandom read (4 bytes read)
  140. [ 8.717375] 8021q: adding VLAN 0 to HW filter on device eth0
  141. [ 9.663814] mount_root: loading kmods from internal overlay
  142. [ 9.710275] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  143. [ 9.725716] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  144. [ 10.789811] jffs2: notice: (384) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (2 unchecked, 2 orphan) and 6 of xref (2 dead, 0 orphan) found.
  145. [ 10.821502] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  146. [ 10.846569] block: extroot: not configured
  147. [ 11.216167] jffs2: notice: (382) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (2 unchecked, 2 orphan) and 6 of xref (2 dead, 0 orphan) found.
  148. [ 11.901730] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  149. [ 11.924857] block: extroot: not configured
  150. [ 11.934341] mount_root: switching to jffs2 overlay
  151. [ 11.977819] overlayfs: upper fs does not support tmpfile.
  152. [ 11.995870] urandom-seed: Seeding with /etc/urandom.seed
  153. [ 12.137302] procd: - early -
  154. [ 12.143136] procd: - watchdog -
  155. [ 12.720638] procd: - watchdog -
  156. [ 12.727266] procd: - ubus -
  157. [ 13.012744] random: ubusd: uninitialized urandom read (4 bytes read)
  158. [ 13.030191] random: ubusd: uninitialized urandom read (4 bytes read)
  159. [ 13.043500] random: ubusd: uninitialized urandom read (4 bytes read)
  160. [ 13.057188] procd: - init -
  161. [ 13.599902] kmodloader: loading kernel modules from /etc/modules.d/*
  162. [ 13.720807] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  163. [ 13.744351] ip6_tables: (C) 2000-2006 Netfilter Core Team
  164. [ 13.767976] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
  165. [ 13.783989] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
  166. [ 13.801975] ip_tables: (C) 2000-2006 Netfilter Core Team
  167. [ 13.823627] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  168. [ 13.907340] xt_time: kernel timezone is -0000
  169. [ 13.992909] PPP generic driver version 2.4.2
  170. [ 14.004212] NET: Registered protocol family 24
  171. [ 14.032356] usbcore: registered new interface driver rtl8187
  172. [ 14.065245] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
  173. [ 14.079724] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
  174. [ 14.095175] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
  175. [ 14.109527] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  176. [ 14.225851] usbcore: registered new interface driver rt2800usb
  177. [ 14.238504] kmodloader: done loading kernel modules from /etc/modules.d/*
  178. [ 15.650149] urandom_read: 5 callbacks suppressed
  179. [ 15.650158] random: jshn: uninitialized urandom read (4 bytes read)
  180. [ 22.944771] 8021q: adding VLAN 0 to HW filter on device eth0
  181. [ 22.976411] br-lan: port 1(eth0.1) entered blocking state
  182. [ 22.987422] br-lan: port 1(eth0.1) entered disabled state
  183. [ 22.998541] device eth0.1 entered promiscuous mode
  184. [ 23.008123] device eth0 entered promiscuous mode
  185. [ 23.083204] br-lan: port 1(eth0.1) entered blocking state
  186. [ 23.094019] br-lan: port 1(eth0.1) entered forwarding state
  187. [ 23.105328] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  188. [ 24.002106] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  189. [ 31.345404] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  190. [ 31.372123] br-lan: port 2(wlan0) entered blocking state
  191. [ 31.382759] br-lan: port 2(wlan0) entered disabled state
  192. [ 31.393736] device wlan0 entered promiscuous mode
  193. [ 32.429396] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  194. [ 32.442299] br-lan: port 2(wlan0) entered blocking state
  195. [ 32.452924] br-lan: port 2(wlan0) entered forwarding state
  196. [ 53.358177] random: crng init done
  197. [ 109.115147] usb 1-1: USB disconnect, device number 2
  198. [ 110.358041] usb 1-1: new high-speed USB device number 3 using ehci-platform
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!