Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.49-g9f2e2f8-dirty (thunderblockit@UbuntuGnome) (gcc version 4.9.4 20160401 (optimized) (UBERTC-4.9.4) ) #1 SMP PREEMPT Tue Jan 31 19:47:11 CET 2017
- [ 0.000000] CPU: ARMv7 Processor [410fd030] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8916 (Flattened Device Tree), model: Qualcomm MSM 8916 HUAWEI Y550-L01
- [ 0.000000] cma: Found external_image__region@0, memory base 0x86000000, size 8 MiB, limit 0xffffffff
- [ 0.000000] cma: Found modem_adsp_region@0, memory base 0x86800000, size 86 MiB, limit 0xffffffff
- [ 0.000000] cma: Found pheripheral_region@0, memory base 0x8be00000, size 6 MiB, limit 0xffffffff
- [ 0.000000] cma: Found mba_region@0, memory base 0x00000000, size 2 MiB, limit 0xffffffff
- [ 0.000000] cma: Found secure_region@0, memory base 0x00000000, size 109 MiB, limit 0xffffffff
- [ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 18 MiB, limit 0x90000000
- [ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
- [ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 20 MiB, limit 0xffffffff
- [ 0.000000] cma: CMA: reserved 8 MiB at 0x86000000 for external_image_mem
- [ 0.000000] cma: CMA: reserved 86 MiB at 0x86800000 for modem_adsp_mem
- [ 0.000000] cma: CMA: reserved 6 MiB at 0x8be00000 for peripheral_mem
- [ 0.000000] cma: CMA: reserved 4 MiB at 0xbfc00000 for mba_mem
- [ 0.000000] cma: CMA: reserved 112 MiB at 0xb8c00000 for secure_mem
- [ 0.000000] cma: CMA: reserved 20 MiB at 0x8ec00000 for venus_qseecom_mem
- [ 0.000000] cma: CMA: reserved 4 MiB at 0xb8800000 for audio_mem
- [ 0.000000] cma: CMA: reserved 20 MiB at 0x83000000 for cont_splash_mem
- [ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 236544
- [ 0.000000] free_area_init_node: node 0, pgdat c1161e40, node_mem_map c13ca000
- [ 0.000000] Normal zone: 1710 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 168960 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 594 pages used for memmap
- [ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @c1d13000 s33280 r0 d15872 u49152
- [ 0.000000] pcpu-alloc: s33280 r0 d15872 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 234834
- [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk androidboot.selinux=permissive androidboot.emmc=true androidboot.serialno=3a28ac0 androidboot.huawei_swtype=normal androidboot.huawei_bootmode=boot androidboot.localproppath=hw/eu usb.pid.index=25 usb.serial=68a0f68abcff androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_boe_nt35512_4p5_fwvga_video huawei,lcd_panel_id = 8
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 2097152 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 741100K/946176K available (11589K kernel code, 1256K rwdata, 4788K rodata, 412K init, 2174K bss, 205076K reserved, 147456K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc1006990 (16379 kB)
- [ 0.000000] .init : 0xc1007000 - 0xc106e200 ( 413 kB)
- [ 0.000000] .data : 0xc1070000 - 0xc11aa0e8 (1257 kB)
- [ 0.000000] .bss : 0xc11aa1ac - 0xc13c9b1c (2175 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000498] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000509] pid_max: default: 32768 minimum: 301
- [ 0.000674] Security Framework initialized
- [ 0.000700] SELinux: Initializing.
- [ 0.000747] SELinux: Starting in permissive mode
- [ 0.000799] Mount-cache hash table entries: 512
- [ 0.001659] Initializing cgroup subsys memory
- [ 0.001691] Initializing cgroup subsys freezer
- [ 0.001699] Initializing cgroup subsys bfqio
- [ 0.001730] CPU: Testing write buffer coherency: ok
- [ 0.002025] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002091] Setting up static identity map for 0xc0b09e40 - 0xc0b09e98
- [ 0.002823] ftrace: Allocated trace_printk buffers
- [ 0.013885] MSM Memory Dump base table set up
- [ 0.013909] MSM Memory Dump apps data table set up
- [ 0.013934] Configuring XPU violations to be fatal errors
- [ 0.015357] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.016355] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.017328] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.017442] Brought up 4 CPUs
- [ 0.017462] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.017468] CPU: All CPU(s) started in SVC mode.
- [ 0.030267] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 0
- [ 0.030286] ------------[ cut here ]------------
- [ 0.030302] WARNING: at fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
- [ 0.030309] name 'cpu/vfp_bounce'
- [ 0.030319] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-g9f2e2f8-dirty #1
- [ 0.030344] [<c0013b5c>] (unwind_backtrace+0x0/0x118) from [<c0011cb0>] (show_stack+0x10/0x14)
- [ 0.030361] [<c0011cb0>] (show_stack+0x10/0x14) from [<c0028f84>] (warn_slowpath_common+0x48/0x68)
- [ 0.030376] [<c0028f84>] (warn_slowpath_common+0x48/0x68) from [<c0028ffc>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 0.030392] [<c0028ffc>] (warn_slowpath_fmt+0x2c/0x3c) from [<c01485dc>] (__xlate_proc_name+0xa0/0xb4)
- [ 0.030408] [<c01485dc>] (__xlate_proc_name+0xa0/0xb4) from [<c014863c>] (__proc_create+0x4c/0xdc)
- [ 0.030423] [<c014863c>] (__proc_create+0x4c/0xdc) from [<c0148b28>] (proc_create_data+0x58/0x98)
- [ 0.030441] [<c0148b28>] (proc_create_data+0x58/0x98) from [<c100a014>] (vfp_init+0x168/0x1d4)
- [ 0.030459] [<c100a014>] (vfp_init+0x168/0x1d4) from [<c1007bbc>] (do_one_initcall+0xb4/0x15c)
- [ 0.030476] [<c1007bbc>] (do_one_initcall+0xb4/0x15c) from [<c1007dc4>] (kernel_init_freeable+0x160/0x228)
- [ 0.030494] [<c1007dc4>] (kernel_init_freeable+0x160/0x228) from [<c0af90ec>] (kernel_init+0x8/0xe4)
- [ 0.030513] [<c0af90ec>] (kernel_init+0x8/0xe4) from [<c000e418>] (ret_from_fork+0x14/0x3c)
- [ 0.030540] ---[ end trace a3714ff96b68db7c ]---
- [ 0.030546] Failed to create procfs node for VFP bounce reporting
- [ 0.032440] pinctrl core: initialized pinctrl subsystem
- [ 0.032727] regulator-dummy: no parameters
- [ 0.036772] NET: Registered protocol family 16
- [ 0.039772] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.073252] gpiochip_find_base: found new base at 902
- [ 0.073334] gpiochip_add: registered GPIOs 902 to 1023 on device: msm_tlmm_gpio
- [ 0.082312] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
- [ 0.082480] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.086535] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- [ 0.090404] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
- [ 0.090806] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
- [ 0.091167] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
- [ 0.091722] ACC: mem_acc_efuse_init: efuse_addr = 0x00058000 (len=0x1000)
- [ 0.091760] ACC: mem_acc_fuse_is_setting_expected: [row:0] = 0x8c20000000800705 @52:1 == 1 ?: no
- [ 0.091850] mem_acc_corner: 0 <--> 0 mV
- [ 0.096229] KPI: Bootloader start count = 30030
- [ 0.096237] KPI: Bootloader end count = 97607
- [ 0.096243] KPI: Bootloader display count = 60433
- [ 0.096248] KPI: Bootloader load kernel count = 2837
- [ 0.096255] KPI: Kernel MPM timestamp = 192094
- [ 0.096261] KPI: Kernel MPM Clock frequency = 32768
- [ 0.096280] socinfo_print: v8, id=206, ver=1.0, raw_id=1797, raw_ver=0, hw_plat=8096, hw_plat_ver=65536
- [ 0.096280] accessory_chip=0, hw_plat_subtype=4, pmic_model=65547, pmic_die_revision=131072
- [ 0.096906] smd_channel_probe_worker: allocation table not initialized
- [ 0.097010] smd_channel_probe_worker: allocation table not initialized
- [ 0.101888] msm_mpm_dev_probe(): Cannot get clk resource for XO
- [ 0.101909] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
- [ 0.103105] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.103456] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.103778] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.104134] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle
- [ 0.104491] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle
- [ 0.104834] 8916_l1: 1225 mV normal idle
- [ 0.105193] 8916_l2: 1200 mV normal idle
- [ 0.105540] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle
- [ 0.105871] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.106254] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.106603] 8916_l4: 2050 mV normal idle
- [ 0.106973] 8916_l5: 1800 mV normal idle
- [ 0.107325] 8916_l6: 1800 mV normal idle
- [ 0.107696] 8916_l7: 1800 mV normal idle
- [ 0.108037] 8916_l7_ao: 1800 mV normal idle
- [ 0.108364] 8916_l7_so: 1800 mV normal idle
- [ 0.108749] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle
- [ 0.109116] 8916_l9: 3300 mV normal idle
- [ 0.109486] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle
- [ 0.109869] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.110232] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.110614] 8916_l13: 3075 mV normal idle
- [ 0.111006] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle
- [ 0.111373] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle
- [ 0.111762] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle
- [ 0.112138] 8916_l17: 2850 mV normal idle
- [ 0.112513] 8916_l18: 2700 mV normal idle
- [ 0.112958] 8916_s2: 1050 <--> 1350 mV at 1150 mV
- [ 0.113056] spm_regulator_probe: name=8916_s2, range=LV, voltage=1150000 uV, mode=PWM, step rate=1200 uV/us
- [ 0.113584] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
- [ 0.113625] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x9870092101bfe397, speed_bits = 0
- [ 0.113642] cpr_parse_pvs_version_fuse: apc_corner: [row: 0]: 0x8c20000000800705, pvs_version = 0
- [ 0.113732] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1112500 1300000] uV
- [ 0.113742] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
- [ 0.113752] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1162500] uV
- [ 0.113966] cpr_init_cpr_efuse: apc_corner: [row:27] = 0xa08d0e0343911b66
- [ 0.113987] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
- [ 0.113999] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 835
- [ 0.114011] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 835
- [ 0.114022] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1133
- [ 0.114081] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
- [ 0.114090] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.650
- [ 0.114103] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 835
- [ 0.114111] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 835
- [ 0.114118] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 835
- [ 0.114126] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 835
- [ 0.114133] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 996
- [ 0.114141] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1059
- [ 0.114148] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1096
- [ 0.114155] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1133
- [ 0.114163] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1133
- [ 0.114213] cpr_populate_opp_table: apc_corner: adding OPP entry failed - OPP may not be enabled, rc=-22
- [ 0.114249] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
- [ 0.114275] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
- [ 0.114286] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
- [ 0.114515] apc_corner: 0 <--> 0 mV
- [ 0.115141] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.115225] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
- [ 0.115237] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
- [ 0.115259] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.115358] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.115425] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
- [ 0.115436] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
- [ 0.115454] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.115561] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
- [ 0.115627] i2c-msm-v2 78ba000.i2c: error on clk_get(core_clk):-517
- [ 0.115637] i2c-msm-v2 78ba000.i2c: error probe() failed with err:-517
- [ 0.115654] platform 78ba000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.115783] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.115848] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
- [ 0.115858] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
- [ 0.115874] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.117978] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.117996] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.118011] msm-thermal qcom,msm-thermal.58: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
- [ 0.118027] msm-thermal qcom,msm-thermal.58: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.118044] msm-thermal qcom,msm-thermal.58: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.118298] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
- [ 0.118680] msm-thermal qcom,msm-thermal.58: probe_sensor_info:unable to find DT for sensor-information.KTM continues
- [ 0.118699] msm-thermal qcom,msm-thermal.58: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
- [ 0.119380] sps:sps is ready.
- [ 0.124908] qcom,rpmcc-8916 1800000.qcom,rpmcc: Registered RPM clocks.
- [ 0.132029] qcom,gcc-8916 1800000.qcom,gcc: Registered GCC clocks
- [ 0.133860] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0
- [ 0.135977] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.136081] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.136092] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.136940] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.137040] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.137051] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.137424] i2c i2c-5: of_i2c: invalid reg on /soc/i2c@78b9000/synaptics@70
- [ 0.137550] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
- [ 0.137639] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.137649] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.138096] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.138183] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.138193] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.163928] bio: create slab <bio-0> at 0
- [ 0.165160] of_get_named_gpio_flags: can't parse gpios property
- [ 0.165258] vdd_vreg: no parameters
- [ 0.166127] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3e MSTR_STS:0x0d1343c8 OPER:0x00000090
- [ 0.165956] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.166195] tps65132_regulator_apps_dischg_config: write reg 3 failed, rc = -107
- [ 0.166435] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3e MSTR_STS:0x051363c8 OPER:0x00000090
- [ 0.166470] tps65132_regulator_set_voltage: failed to write reg 0, rc = -107
- [ 0.166478] tps65132-pos: failed to apply 5400000uV constraint
- [ 0.166550] tps65132_regulator_probe: regulator register failed, rc = -107
- [ 0.166637] tps65132: probe of 0-003e failed with error -107
- [ 0.167387] SCSI subsystem initialized
- [ 0.167912] usbcore: registered new interface driver usbfs
- [ 0.167951] usbcore: registered new interface driver hub
- [ 0.168057] usbcore: registered new device driver usb
- [ 0.168153] media: Linux media interface: v0.10
- [ 0.168192] Linux video capture interface: v2.00
- [ 0.168325] BATTERY: batterydata_init: Battery-data device created!
- [ 0.169636] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- [ 0.169720] ION-heap mm: Cannot specify alignment for this type of heap
- [ 0.169813] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 0.169967] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
- [ 0.170112] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
- [ 0.170257] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
- [ 0.170412] ION heap system created
- [ 0.170490] ION heap kmalloc created
- [ 0.170504] ION heap mm created at 0xb8c00000 with size 6d00000
- [ 0.170514] ION heap qsecom created at 0x8ec00000 with size 1200000
- [ 0.170523] ION heap audio created at 0xb8800000 with size 314000
- [ 0.170536] ION heap pil_1 created at 0x8be00000 with size 600000
- [ 0.170545] ION heap pil_2 created at 0x86800000 with size 5600000
- [ 0.170641] msm_bus_fabric_init_driver
- [ 0.170786] msm_bus_device 580000.ad-hoc-bus: Dev 1024
- [ 0.170799] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.170807] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.170867] msm_bus_device 580000.ad-hoc-bus: Dev 0
- [ 0.170878] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.170884] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.170941] msm_bus_device 580000.ad-hoc-bus: Dev 4096
- [ 0.170953] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.170960] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.173473] msm_bus_init_clk: Valid node clk node 1024 ctx 0
- [ 0.173477] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
- [ 0.173532] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
- [ 0.173581] msm_bus_init_clk: Valid node clk node 4096 ctx 1<6>[ 0.178374] gdsc_venus: no parameters
- [ 0.178550] gdsc_mdss: no parameters
- [ 0.178691] gdsc_jpeg: no parameters
- [ 0.178854] gdsc_vfe: no parameters
- [ 0.179035] gdsc_oxili_gx: no parameters
- [ 0.179604] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 0.180082] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
- [ 0.180895] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f00c0000, with 2 ctx banks
- [ 0.181428] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0780000, with 20 ctx banks
- [ 0.185324] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
- [ 0.185416] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
- [ 0.185491] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
- [ 0.185558] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
- [ 0.185621] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
- [ 0.185684] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
- [ 0.185753] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
- [ 0.185816] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
- [ 0.185878] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
- [ 0.185944] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
- [ 0.186006] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
- [ 0.186069] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
- [ 0.186131] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
- [ 0.186223] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
- [ 0.186288] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
- [ 0.186350] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
- [ 0.186413] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
- [ 0.186479] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
- [ 0.186542] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
- [ 0.186607] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
- [ 0.186670] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
- [ 0.186734] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
- [ 0.187452] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.187858] Bluetooth: ee869f18
- [ 0.187889] NET: Registered protocol family 31
- [ 0.187893] Bluetooth: ee869f18
- [ 0.187901] Bluetooth: ee869f10Bluetooth: ee869f00
- [ 0.187932] Bluetooth: ee869f00<6>[ 0.188120] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.188137] cfg80211: World regulatory domain updated:
- [ 0.188142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 0.188148] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.188153] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.188159] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 0.188164] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.188169] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.188175] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.188180] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.188185] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 0.189320] Switching to clocksource arch_sys_counter
- [ 0.210946] NET: Registered protocol family 2
- [ 0.211312] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.211411] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.211504] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.211539] TCP: reno registered
- [ 0.211547] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.211572] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.211766] NET: Registered protocol family 1
- [ 0.212166] gcc-mdss-8916 qcom,gcc-mdss.29: Registered GCC MDSS clocks.
- [ 0.212829] Trying to unpack rootfs image as initramfs...
- [ 0.252468] Freeing initrd memory: 856K (c2000000 - c20d6000)
- [ 0.255925] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available
- [ 0.257620] audit: initializing netlink socket (disabled)
- [ 0.257647] type=2000 audit(0.229:1): initialized
- [ 0.258178] bounce pool size: 64 pages
- [ 0.262241] fuse init (API version 7.23)
- [ 0.262577] msgmni has been set to 1218
- [ 0.262608] SELinux: Registering netfilter hooks
- [ 0.264230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.264237] io scheduler noop registered (default)
- [ 0.264242] io scheduler deadline registered
- [ 0.264256] io scheduler row registered
- [ 0.264337] io scheduler cfq registered
- [ 0.264415] io scheduler bfq registered
- [ 0.264419] BFQ I/O-scheduler: v7r8
- [ 0.264526] gpiochip_find_base: found new base at 898
- [ 0.264587] gpiochip_add: registered GPIOs 898 to 901 on device: pm8916-mpp
- [ 0.264792] qcom,qpnp-pin qpnp-pin-2: qpnp_pin_probe: gpio_chip registered between 898-901
- [ 0.264829] gpiochip_find_base: found new base at 897
- [ 0.264882] gpiochip_add: registered GPIOs 897 to 897 on device: pm8916-gpio
- [ 0.264920] qcom,qpnp-pin qpnp-pin-3: qpnp_pin_probe: gpio_chip registered between 897-897
- [ 0.265049] gpiochip_find_base: found new base at 865
- [ 0.265105] gpiochip_add: registered GPIOs 865 to 896 on device: smp2p
- [ 0.265541] gpiochip_find_base: found new base at 833
- [ 0.265596] gpiochip_add: registered GPIOs 833 to 864 on device: smp2p
- [ 0.265618] gpiochip_find_base: found new base at 801
- [ 0.265676] gpiochip_add: registered GPIOs 801 to 832 on device: smp2p
- [ 0.266126] gpiochip_find_base: found new base at 769
- [ 0.266181] gpiochip_add: registered GPIOs 769 to 800 on device: smp2p
- [ 0.266203] gpiochip_find_base: found new base at 737
- [ 0.266260] gpiochip_add: registered GPIOs 737 to 768 on device: slave-kernel
- [ 0.266315] platform qcom,smp2pgpio-ssr-smp2p-1-in.12: Driver smp2pgpio requests probe deferral
- [ 0.266336] gpiochip_find_base: found new base at 737
- [ 0.266390] gpiochip_add: registered GPIOs 737 to 768 on device: master-kernel
- [ 0.266433] platform qcom,smp2pgpio-ssr-smp2p-1-out.13: Driver smp2pgpio requests probe deferral
- [ 0.266454] gpiochip_find_base: found new base at 737
- [ 0.266507] gpiochip_add: registered GPIOs 737 to 768 on device: smp2p
- [ 0.266974] gpiochip_find_base: found new base at 705
- [ 0.267029] gpiochip_add: registered GPIOs 705 to 736 on device: smp2p
- [ 0.267052] gpiochip_find_base: found new base at 673
- [ 0.267110] gpiochip_add: registered GPIOs 673 to 704 on device: slave-kernel
- [ 0.267157] platform qcom,smp2pgpio-ssr-smp2p-4-in.18: Driver smp2pgpio requests probe deferral
- [ 0.267178] gpiochip_find_base: found new base at 673
- [ 0.267232] gpiochip_add: registered GPIOs 673 to 704 on device: master-kernel
- [ 0.267274] platform qcom,smp2pgpio-ssr-smp2p-4-out.19: Driver smp2pgpio requests probe deferral
- [ 0.267747] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
- [ 0.267759] mdss_mdp_probe+0x1b8/0xb84->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
- [ 0.267769] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
- [ 0.267794] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree
- [ 0.267831] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
- [ 0.267843] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1
- [ 0.267849] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2
- [ 0.267861] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3
- [ 0.267880] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
- [ 0.268045] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- [ 0.268055] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-cmd : u32 array read
- [ 0.268074] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
- [ 0.268101] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-ad-off : doesn't exist in device tree
- [ 0.268411] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
- [ 0.269992] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.270111] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.270448] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.270466] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.270499] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.270511] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.270519] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.270533] of_get_named_gpio_flags: can't parse gpios property
- [ 0.270537] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.270683] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.270937] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.270993] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.271036] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.271040] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.271058] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.271318] mdss_dsi_status_init: DSI status check interval:5000
- [ 0.271625] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.24
- [ 0.272270] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.273640] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- [ 0.274593] msm_rpm_log_probe: OK
- [ 0.275815] NET: Registered protocol family 27
- [ 0.277407] In memshare_probe, Memshare probe success
- [ 0.279161] of_get_named_gpio_flags exited with status -517
- [ 0.279171] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
- [ 0.279212] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
- [ 0.280537] of_get_named_gpio_flags exited with status -517
- [ 0.280546] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
- [ 0.280635] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
- [ 0.289309] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
- [ 0.295174] brd: module loaded
- [ 0.297460] loop: module loaded
- [ 0.297767] zram: Created 1 device(s)
- [ 0.298104] apds993x 0-0039: Unable to read ps threshold
- [ 0.298109] apds993x_probe: sensor_parse_dt() err
- [ 0.298124] apds993x: probe of 0-0039 failed with error -22
- [ 0.298471] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
- [ 0.298491] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- [ 0.298497] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- [ 0.298508] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0<6>[ 0.298513] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
- [ 0.298741] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
- [ 0.300201] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 0.300207] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 0.300281] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 0.300286] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 0.300360] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 0.300365] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 0.300509] of_get_named_gpio_flags: can't parse gpios property
- [ 0.301487] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
- [ 0.301838] i2c-msm-v2 78ba000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:1) mode:FIFO slv_addr:0xe MSTR_STS:0x091343c8 OPER:0x00000090
- [ 0.301871] nfc-nci 6-000e: nfcc_hw_check: - no NFCC available
- [ 0.302272] SCSI Media Changer driver v0.25
- [ 0.302673] of_get_named_gpio_flags: can't parse gpios property
- [ 0.302679] of_get_named_gpio_flags: can't parse gpios property
- [ 0.302685] of_get_named_gpio_flags: can't parse gpios property
- [ 0.302690] of_get_named_gpio_flags: can't parse gpios property
- [ 0.302695] of_get_named_gpio_flags: can't parse gpios property
- [ 0.302700] of_get_named_gpio_flags: can't parse gpios property
- [ 0.302706] of_get_named_gpio_flags: can't parse gpios property
- [ 0.303100] sps: BAM device 0x07884000 is not registered yet.
- [ 0.303110] sps:BAM 0x07884000 is registered.
- [ 0.305187] sps:BAM 0x07884000 (va:0xf0340000) enabled: ver:0x18, number of pipes:16
- [ 0.306368] tun: Universal TUN/TAP device driver, 1.6
- [ 0.306373] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.308392] PPP generic driver version 2.4.2
- [ 0.308475] PPP BSD Compression module registered
- [ 0.308480] PPP Deflate Compression module registered
- [ 0.308494] PPP MPPE Compression module registered
- [ 0.308500] NET: Registered protocol family 24
- [ 0.308519] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 0.308523] CSLIP: code copyright 1989 Regents of the University of California.
- [ 0.308865] wcnss_wlan probed in built-in mode
- [ 0.309425] usbcore: registered new interface driver asix
- [ 0.309454] usbcore: registered new interface driver ax88179_178a
- [ 0.309480] usbcore: registered new interface driver cdc_ether
- [ 0.309505] usbcore: registered new interface driver net1080
- [ 0.309530] usbcore: registered new interface driver cdc_subset
- [ 0.309556] usbcore: registered new interface driver zaurus
- [ 0.309729] usbcore: registered new interface driver cdc_ncm
- [ 0.310026] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 0.310358] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 0.310459] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
- [ 0.310556] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
- [ 0.310637] msm_sharedmem: msm_sharedmem_probe: qcom,client-id property not found
- [ 0.310722] msm_sharedmem: msm_sharedmem_probe: Device created for client 'bimc'
- [ 0.310996] msm_otg 78d9000.usb: msm_otg probe
- [ 0.311526] of_get_named_gpio_flags: can't parse gpios property
- [ 0.311533] of_get_named_gpio_flags: can't parse gpios property
- [ 0.311539] of_get_named_gpio_flags: can't parse gpios property
- [ 0.311550] of_get_named_gpio_flags: can't parse gpios property
- [ 0.313420] msm_otg 78d9000.usb: OTG regs = f0186000
- [ 0.314727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.314733] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 0.314895] ehci-msm2: Qualcomm EHCI Host Controller
- [ 0.315314] ice40_spi_probe: ice40_spi_probe failed
- [ 0.315671] usbcore: registered new interface driver cdc_acm
- [ 0.315676] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.315710] usbcore: registered new interface driver ccid_bridge
- [ 0.315782] ccid_bridge_init: success
- [ 0.315807] usbcore: registered new interface driver usb-storage
- [ 0.315827] usbcore: registered new interface driver ums-alauda
- [ 0.315846] usbcore: registered new interface driver ums-cypress
- [ 0.315869] usbcore: registered new interface driver ums-datafab
- [ 0.315888] usbcore: registered new interface driver ums-freecom
- [ 0.315907] usbcore: registered new interface driver ums-isd200
- [ 0.315926] usbcore: registered new interface driver ums-jumpshot
- [ 0.315947] usbcore: registered new interface driver ums-karma
- [ 0.315967] usbcore: registered new interface driver ums-onetouch
- [ 0.315986] usbcore: registered new interface driver ums-sddr09
- [ 0.316006] usbcore: registered new interface driver ums-sddr55
- [ 0.316025] usbcore: registered new interface driver ums-usbat
- [ 0.316097] usbcore: registered new interface driver usbserial
- [ 0.316117] usbcore: registered new interface driver qc_csvt
- [ 0.316139] usbserial: USB Serial support registered for qc_csvt
- [ 0.316162] usbcore: registered new interface driver usb_ehset_test
- [ 0.317619] mousedev: PS/2 mouse device common for all mice
- [ 0.317685] usbcore: registered new interface driver xpad
- [ 0.317948] msm_otg 78d9000.usb: phy_reset: success
- [ 0.318110] [SYNAP] rmi4dsx_fw_update_module_init(line 2150): begin
- [ 0.318116] [GTP_INFO] GTP driver installing...
- [ 0.318821] input: hbtp_vm as /devices/virtual/input/input0
- [ 0.319000] AKM compass driver: initialize.
- [ 0.319035] AKM compass driver: initialize.<6>[ 0.411465] input: compass as /devices/virtual/input/input1
- [ 0.411921] akm09911 0-000c: successfully probed.
- [ 0.412082] of_get_named_gpio_flags: can't parse gpios property
- [ 0.444255] input: lis3dh-accel as /devices/soc.0/78b6000.i2c/i2c-0/0-0018/input/input2
- [ 0.445027] i2c-core: driver [lis3dh_acc] using legacy suspend method
- [ 0.445032] i2c-core: driver [lis3dh_acc] using legacy resume method
- [ 0.445079] i2c-core: driver [bma2x2-accel] using legacy suspend method
- [ 0.445083] i2c-core: driver [bma2x2-accel] using legacy resume method
- [ 0.445185] [kx023_err]kionix_parse_dt: default gpio value = 1017
- [ 0.445185]
- [ 0.445193] [kx023_info]print_default_config,line:1334,gpio_int1=1017
- [ 0.445197] [kx023_info]print_default_config,line:1335,accel_direction=0
- [ 0.445202] [kx023_info]print_default_config,line:1336,accel_g_range=0
- [ 0.445207] [kx023_info]print_default_config,line:1337,poll_interval=200
- [ 0.445211] [kx023_info]print_default_config,line:1338,min_interval=5
- [ 0.445216] [kx023_info]print_default_config,line:1339,accel_res=0 sucessfully
- [ 0.445222] of_get_named_gpio_flags: can't parse gpios property
- [ 0.445226] [kx023_err]kionix_parse_dt: i2c scl gpio -2 is not configered
- [ 0.445226]
- [ 0.445232] [kx023_err]kionix_accel_probe:line1519:Failed to parse device tree
- [ 0.445242] kionix_accel: probe of 0-001e failed with error -22
- [ 0.445262] i2c-core: driver [kionix_accel] using legacy suspend method
- [ 0.445267] i2c-core: driver [kionix_accel] using legacy resume method
- [ 0.445505] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
- [ 0.445691] i2c /dev entries driver
- [ 0.447557] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
- [ 0.448484] msm_cci_probe: pdev ee2f7400 device id = -1
- [ 0.451716] msm_flash_lm3642_init entry
- [ 0.451871] msm_flash_lm3642_i2c_probe entry
- [ 0.451876] msm_flash_lm3642_i2c_probe: id is NULL
- [ 0.451880] msm_led_get_dt_data:412 called
- [ 0.451886] msm_led_get_dt_data:436 subdev id 0
- [ 0.451892] msm_led_get_dt_data:441 msm_led_get_dt_data label lm3642, rc 0
- [ 0.451897] msm_led_get_dt_data:455 flash_high_current 6
- [ 0.451904] msm_led_get_dt_data:460 msm_led_get_dt_data qcom,cci-master 0, rc -22
- [ 0.451915] msm_led_get_dt_data:528 msm_led_get_dt_data gpio count 2
- [ 0.451924] msm_led_get_dt_data:541 msm_led_get_dt_data gpio_array[0] = 988
- [ 0.451932] msm_led_get_dt_data:541 msm_led_get_dt_data gpio_array[1] = 933
- [ 0.451957] msm_flash_pinctrl_init:143 msm_flash_pinctrl_init: 143 PINCTRL is not enables in Flash driver node
- [ 0.452026] msm_flash_lm3642_led_off:245 called
- [ 0.452030] msm_flash_clear_err_and_unlock entry
- [ 0.452475] clear err and unlock success:00
- [ 0.452824] msm_flash_i2c_probe:717 msm_flash_i2c_probe:717 probe success
- [ 0.452839] msm_flash_lm3642_led_off:245 called
- [ 0.452843] msm_flash_clear_err_and_unlock entry
- [ 0.453274] clear err and unlock success:00
- [ 0.454013] MSM-SENSOR-INIT msm_sensor_init_module:143 MSM_SENSOR_INIT_MODULE (null)
- [ 0.454671] g_sctrl[0] edeaaa00
- [ 0.454879] g_sctrl[1] edeaac00<6>[ 0.454895] mt9m114_init_module:1155
- [ 0.455172] mt9m114_init_module:1160 rc -19
- [ 0.455206] ov5645_init_module:558
- [ 0.470417] MSM-CPP cpp_init_hardware:815 CPP HW Version: 0x40010000
- [ 0.470426] MSM-CPP cpp_init_hardware:825 stream_cnt:0
- [ 0.471899] huawei_cam_is_factory_mode run mode is 2
- [ 0.473119] __msm_jpeg_init:1236] Jpeg Device id 0
- [ 0.474197] BMS: bms_get_adc: vadc not found - defer probe rc=-517
- [ 0.474203] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
- [ 0.474216] spmi qpnp-vm-bms-9: Driver qcom,qpnp-vm-bms requests probe deferral
- [ 0.474357] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
- [ 0.474369] spmi qpnp-linear-charger-8: Driver qcom,qpnp-linear-charger requests probe deferral
- [ 0.493164] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 0.493286] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 0.493286]
- [ 0.493430] cpuidle: using governor ladder
- [ 0.493435] cpuidle: using governor menu
- [ 0.493459] sdhci: Secure Digital Host Controller Interface driver
- [ 0.493463] sdhci: Copyright(c) Pierre Ossman
- [ 0.493466] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.493777] of_get_named_gpio_flags: can't parse gpios property
- [ 0.494261] the voltage of gpio is high when insert the sdcard.
- [ 0.497459] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
- [ 0.497467] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 0.497474] sdhci_msm 7824900.sdhci: dma_latency = 2
- [ 0.497480] sdhci_msm 7824900.sdhci: dma_latency = 401
- [ 0.497486] sdhci_msm 7824900.sdhci: dma_latency = 701
- [ 0.497494] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 0.497500] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 0.497508] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 0.497514] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 0.497520] sdhci_msm 7824900.sdhci: Host using default pm_qos
- [ 0.498120] mmc0: no vqmmc regulator found
- [ 0.498128] mmc0: no vmmc regulator found
- [ 0.526042] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
- [ 0.526937] the voltage of gpio is high when insert the sdcard.
- [ 0.533406] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
- [ 0.533415] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2
- [ 0.533422] sdhci_msm 7864900.sdhci: dma_latency = 701
- [ 0.533430] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 0.533436] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 0.533443] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 0.533450] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 0.533455] sdhci_msm 7864900.sdhci: Host using default pm_qos
- [ 0.534278] mmc1: no vqmmc regulator found
- [ 0.534287] mmc1: no vmmc regulator found
- [ 0.566040] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
- [ 0.566513] qcom,leds-qpnp: probe of leds-qpnp-10 failed with error -10
- [ 0.570491] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 0.570503] qce 720000.qcedev: CE device = 0x0
- [ 0.570503] , IO base, CE = 0xf0740000
- [ 0.570503] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- [ 0.570503] IO base BAM = 0x (null)
- [ 0.570503] BAM IRQ 239
- [ 0.570503] Engines Availability = 0x2010853
- [ 0.570529] sps:BAM 0x00704000 is registered.
- [ 0.574595] sps:BAM 0x00704000 (va:0xf0c40000) enabled: ver:0x25, number of pipes:8
- [ 0.575357] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 0.575750] qcedev: FIPS140-2 Known Answer Tests : Skipped
- [ 0.576618] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 0.576630] qcrypto 720000.qcrypto: CE device = 0x0
- [ 0.576630] , IO base, CE = 0xf0c80000
- [ 0.576630] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- [ 0.576630] IO base BAM = 0x (null)
- [ 0.576630] BAM IRQ 239
- [ 0.576630] Engines Availability = 0x2010853
- [ 0.578039] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 0.578489] qcrypto 720000.qcrypto: qcrypto-ecb-aes
- [ 0.578611] qcrypto 720000.qcrypto: qcrypto-cbc-aes
- [ 0.578690] qcrypto 720000.qcrypto: qcrypto-ctr-aes
- [ 0.578760] qcrypto 720000.qcrypto: qcrypto-ecb-des
- [ 0.578827] qcrypto 720000.qcrypto: qcrypto-cbc-des
- [ 0.578893] qcrypto 720000.qcrypto: qcrypto-ecb-3des
- [ 0.578962] qcrypto 720000.qcrypto: qcrypto-cbc-3des
- [ 0.579028] qcrypto 720000.qcrypto: qcrypto-xts-aes
- [ 0.579093] qcrypto 720000.qcrypto: qcrypto-sha1
- [ 0.579158] qcrypto 720000.qcrypto: qcrypto-sha256
- [ 0.579224] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 0.579291] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 0.579408] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 0.579469] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 0.579528] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 0.579590] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 0.579648] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
- [ 0.579706] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
- [ 0.579766] qcrypto 720000.qcrypto: qcrypto-aes-ccm
- [ 0.579825] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 0.579829] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- [ 0.580321] usbcore: registered new interface driver usbhid
- [ 0.580326] usbhid: USB HID core driver
- [ 0.580538] ashmem: initialized
- [ 0.580634] logger: created 256K log 'log_main'
- [ 0.580726] logger: created 256K log 'log_events'
- [ 0.580813] logger: created 256K log 'log_radio'
- [ 0.580908] logger: created 256K log 'log_system'
- [ 0.581252] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 0.581269] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 0.581469] input: qpnp_pon as /devices/virtual/input/input3
- [ 0.582930] PMIC@SID0: PM8916 v2.0 options: 2, 2, 0, 0
- [ 0.584345] armbw-pm qcom,armbw-pm.31: BW HWmon governor registered.
- [ 0.585388] devfreq qcom,cpubw.30: Couldn't update frequency transition information.
- [ 0.587756] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.587781] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.596040] msm-pcm-lpa qcom,msm-pcm-lpa.39: msm_pcm_probe: dev name qcom,msm-pcm-lpa.39
- [ 0.596603] platform qcom,msm-voip-dsp.41: Driver msm-voip-dsp requests probe deferral
- [ 0.596951] platform qcom,msm-pcm-voice.42: Driver msm-pcm-voice requests probe deferral
- [ 0.600626] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.600636] of_get_named_gpio_flags: can't parse gpios property
- [ 0.600646] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.600692] of_get_named_gpio_flags: can't parse gpios property
- [ 0.602221] msm8x16-asoc-wcd sound.67: ASoC: platform (null) not registered
- [ 0.602247] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.602276] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.603036] oprofile: using timer interrupt.
- [ 0.603113] u32 classifier
- [ 0.603117] Actions configured
- [ 0.603124] Netfilter messages via NETLINK v0.30.
- [ 0.603183] nf_conntrack version 0.5.0 (13974 buckets, 55896 max)
- [ 0.603561] ctnetlink v0.93: registering with nfnetlink.
- [ 0.603628] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 0.603632] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 0.603943] xt_time: kernel timezone is -0000
- [ 0.604172] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.604341] arp_tables: (C) 2002 David S. Miller
- [ 0.604384] TCP: cubic registered
- [ 0.604390] Initializing XFRM netlink socket
- [ 0.604669] NET: Registered protocol family 10
- [ 0.605238] mip6: Mobile IPv6
- [ 0.605260] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.605345] sit: IPv6 over IPv4 tunneling driver
- [ 0.605707] NET: Registered protocol family 17
- [ 0.605726] NET: Registered protocol family 15
- [ 0.605782] Bridge firewalling registered
- [ 0.605790] Ebtables v2.0 registered
- [ 0.605925] Bluetooth: ee869ef8
- [ 0.605944] Bluetooth: ee869ef0Bluetooth: ee869f08
- [ 0.605952] Bluetooth: ee869ee0Bluetooth: ee869ee0
- [ 0.605963] Bluetooth: ee869ed8Bluetooth: ee869f18
- [ 0.605973] Bluetooth: ee869f18<6>[ 0.606005] l2tp_core: L2TP core driver, V2.0
- [ 0.606016] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 0.606231] gpiochip_find_base: found new base at 673
- [ 0.606299] gpiochip_add: registered GPIOs 673 to 704 on device: slave-kernel
- [ 0.606517] gpiochip_find_base: found new base at 641
- [ 0.606580] gpiochip_add: registered GPIOs 641 to 672 on device: master-kernel
- [ 0.606652] gpiochip_find_base: found new base at 609
- [ 0.606710] gpiochip_add: registered GPIOs 609 to 640 on device: slave-kernel
- [ 0.606922] gpiochip_find_base: found new base at 577
- [ 0.606989] gpiochip_add: registered GPIOs 577 to 608 on device: master-kernel
- [ 0.607142] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.607276] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.607615] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.607633] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.607667] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.607678] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.607686] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.607699] of_get_named_gpio_flags: can't parse gpios property
- [ 0.607703] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.607812] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.608135] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.608194] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.608237] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.608242] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.608263] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.608498] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.609745] mmc0: BKOPS_EN bit = 0
- [ 0.610720] cma: Assigned CMA region at 0 to qcom,mba-mem.151 device
- [ 0.616674] of_batterydata_read_data: HB474284RBC_LG_SCUD loaded
- [ 0.628001] mmc0: new HS200 MMC card at address 0001
- [ 0.628260] mmcblk0: mmc0:0001 H4G1d 3.64 GiB
- [ 0.628372] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB
- [ 0.628669] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
- [ 0.630570] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24
- [ 0.641005] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0 shutdown_soc_invalid=0 shutdown_ocv=4211000 shutdown_soc=90 last_soc=90 calculated_soc=91 last_ocv_uv=4211000
- [ 0.672197] BMS: qpnp_vm_bms_probe: probe success: soc=90 vbatt=4174178 ocv=4211000 warm_reset=0
- [ 0.672317] of_get_named_gpio_flags: can't parse gpios property
- [ 0.672322] CHG: qpnp_lbc_main_probe: use external ic to control ovp function.
- [ 0.672327] CHG: use_external_ic_control_ovp: usbin_ovp_irq = -2
- [ 0.672331] CHG: use_external_ic_control_ovp: usbin_ovp_irq is n-valid
- [ 0.740204] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=1 batt_pres=1 batt_volt=4192126 soc=90
- [ 0.740270] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.740307] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.741861] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.741870] of_get_named_gpio_flags: can't parse gpios property
- [ 0.741881] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.741926] of_get_named_gpio_flags: can't parse gpios property
- [ 0.743545] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 0.743570] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.743598] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.743741] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.743857] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.744195] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.744214] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.744247] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.744259] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.744267] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.744280] of_get_named_gpio_flags: can't parse gpios property
- [ 0.744284] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.744410] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.744673] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.744726] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.744769] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.744774] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.744791] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.745002] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.745142] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.745176] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.746243] Registering SWP/SWPB emulation handler
- [ 0.833812] vdd_vreg: disabling
- [ 0.833837] mem_acc_corner: disabling
- [ 0.833842] regulator-dummy: disabling
- [ 0.834184] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.834194] of_get_named_gpio_flags: can't parse gpios property
- [ 0.834205] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.834255] of_get_named_gpio_flags: can't parse gpios property
- [ 0.835947] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 0.835972] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.836003] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.836175] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.836290] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.836628] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.836646] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.836679] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.836691] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.836698] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.836712] of_get_named_gpio_flags: can't parse gpios property
- [ 0.836716] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.836860] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.837143] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.837197] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.837240] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.837245] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.837262] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.837515] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.837674] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.837709] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.838771] file system registered
- [ 0.838825] mbim_init: initialize 1 instances
- [ 0.838890] mbim_init: Initialized 1 ports
- [ 0.838895] mbim_bam_setup: no_ports:1
- [ 0.838974] mbim_bam_setup: Initialized 1 ports
- [ 0.839812] rndis_qc_init: initialize rndis QC instance
- [ 0.840200] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 0.840206] android_usb gadget: Number of LUNs=3
- [ 0.840212] lun0: LUN: removable file: (no medium)
- [ 0.840217] lun1: LUN: read only CD-ROM file: (no medium)
- [ 0.840222] lun2: LUN: removable file: (no medium)
- [ 0.840495] android_usb gadget: android_usb ready
- [ 0.840504] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
- [ 0.840904] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.840912] of_get_named_gpio_flags: can't parse gpios property
- [ 0.840923] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.840970] of_get_named_gpio_flags: can't parse gpios property
- [ 0.841429] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 0.841441] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
- [ 0.842815] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 0.842840] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.842886] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.843065] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.843203] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.843542] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.843560] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.843594] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.843606] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.843613] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.843627] of_get_named_gpio_flags: can't parse gpios property
- [ 0.843631] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.843748] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.844026] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.844080] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.844123] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.844127] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.844145] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.844415] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.844580] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.844614] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.845474] gpiod_set_debounce: gpio-1009 status -22
- [ 0.845723] input: gpio-keys as /devices/soc.0/gpio_keys.63/input/input4
- [ 0.846103] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.846111] of_get_named_gpio_flags: can't parse gpios property
- [ 0.846121] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.846166] of_get_named_gpio_flags: can't parse gpios property
- [ 0.847777] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 0.847800] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.847828] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.847987] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.848102] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.848439] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.848458] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.848491] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.848503] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.848510] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.848523] of_get_named_gpio_flags: can't parse gpios property
- [ 0.848527] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.848651] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.848947] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.848953] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-01-10 07:29:41 UTC (804581)
- [ 0.849010] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.849052] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.849056] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.849074] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.849431] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.849608] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.849644] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.856146] msm_thermal:interrupt_mode_init Interrupt mode init
- [ 0.856973] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
- [ 0.858099] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.858108] of_get_named_gpio_flags: can't parse gpios property
- [ 0.858119] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.858186] of_get_named_gpio_flags: can't parse gpios property
- [ 0.860107] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 0.860135] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.860168] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.860361] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.860484] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.860822] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.860841] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.860874] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.860886] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.860894] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.860908] of_get_named_gpio_flags: can't parse gpios property
- [ 0.860912] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.861084] qcom,cc-debug-8916 1874000.qcom,cc-debug: Registered Debug Mux successfully
- [ 0.861117] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.861399] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.861457] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.861501] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.861505] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.861528] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.861855] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.862068] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.862100] clock_late_init: Removing enables held for handed-off clocks
- [ 0.862105] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.862448] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.862456] of_get_named_gpio_flags: can't parse gpios property
- [ 0.862467] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.862517] of_get_named_gpio_flags: can't parse gpios property
- [ 0.864448] ALSA device list:
- [ 0.864454] No soundcards found.
- [ 0.864573] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 0.864597] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.864629] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.864817] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.864929] Warning: unable to open an initial console.
- [ 0.864937] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.865337] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.865347] Freeing unused kernel memory: 412K (c1007000 - c106e000)
- [ 0.865355] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.865389] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.865401] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.865409] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.865455] of_get_named_gpio_flags: can't parse gpios property
- [ 0.865461] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.865597] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.865977] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.866038] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.866089] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.866094] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.866119] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.866349] init: init started!
- [ 0.870951] SELinux: 2048 avtab hash slots, 11025 rules.
- [ 0.872465] mmc1: new ultra high speed SDR104 SDHC card at address 59b4
- [ 0.872751] mmcblk1: mmc1:59b4 5WCGO 29.8 GiB
- [ 0.873593] mmcblk1: p1 p2 p3
- [ 0.874125] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 0.874348] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 0.874385] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 0.874639] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 0.874647] of_get_named_gpio_flags: can't parse gpios property
- [ 0.874657] msm8x16-asoc-wcd sound.67: default codec configured
- [ 0.874705] of_get_named_gpio_flags: can't parse gpios property
- [ 0.876394] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 0.876420] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 0.876450] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 0.876633] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.876751] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 0.877096] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.877115] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.877149] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.877165] SELinux: 2048 avtab hash slots, 11025 rules.
- [ 0.877161] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.877170] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.877181] of_get_named_gpio_flags: can't parse gpios property
- [ 0.877186] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 0.877196] SELinux: 1 users, 2 roles, 972 types, 0 bools, 1 sens, 1024 cats
- [ 0.877203] SELinux: 87 classes, 11025 rules
- [ 0.877364] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.877911] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 0.877975] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 0.878066] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 0.878071] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 0.878094] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 0.879145] SELinux: Completing initialization.
- [ 0.879150] SELinux: Setting up existing superblocks.
- [ 0.879168] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 0.879181] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- [ 0.879226] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- [ 0.879241] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- [ 0.879261] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 0.879280] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- [ 0.884507] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- [ 0.884522] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- [ 0.884532] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- [ 0.884543] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- [ 0.884564] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- [ 0.884614] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
- [ 0.884622] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 0.884643] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 1.013380] type=1403 audit(804581.659:2): policy loaded auid=4294967295 ses=4294967295
- [ 1.013858] init: (Initializing SELinux non-enforcing took 0.15s.)
- [ 1.030965] init: init second stage started!
- [ 1.177599] init: waitpid failed: No child processes
- [ 1.177844] init: (Loading properties from /default.prop took 0.00s.)
- [ 1.179435] init: (Parsing /init.environ.rc took 0.00s.)
- [ 1.179684] init: (Parsing /init.usb.rc took 0.00s.)
- [ 1.180576] init: /init.qcom.rc: 494: user option requires a user id
- [ 1.183506] init: (Parsing init.qcom.usb.rc took 0.00s.)
- [ 1.183994] init: init.target.rc: 226: invalid command 'load_all_props'
- [ 1.184171] init: could not import file 'init.carrier.rc' from 'init.target.rc'
- [ 1.184295] init: (Parsing init.qcom.power.rc took 0.00s.)
- [ 1.184312] init: (Parsing init.target.rc took 0.00s.)
- [ 1.184341] init: could not import file 'init.qcom.factory.rc' from '/init.qcom.rc'
- [ 1.184355] init: (Parsing /init.qcom.rc took 0.00s.)
- [ 1.184710] init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 1.184775] init: (Parsing /init.zygote32.rc took 0.00s.)
- [ 1.184870] init: (Parsing /init.trace.rc took 0.00s.)
- [ 1.185173] init: /init.cm.rc: 161: ignored duplicate definition of service 'bugreport'
- [ 1.185315] init: (Parsing /init.superuser.rc took 0.00s.)
- [ 1.185331] init: (Parsing /init.cm.rc took 0.00s.)
- [ 1.185346] init: (Parsing /init.rc took 0.01s.)
- [ 1.185515] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
- [ 1.185687] init: Starting service 'ueventd'...
- [ 1.186035] type=1400 audit(804581.829:3): avc: denied { mounton } for pid=1 comm="init" path="/sys/kernel/debug" dev="debugfs" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=1
- [ 1.186487] init: Waiting for /dev/.coldboot_done...
- [ 1.186963] ueventd: ueventd started!
- [ 1.623348] ueventd: Coldboot took 0.42s.
- [ 1.630770] init: Waiting for /dev/.coldboot_done took 0.44s.
- [ 1.633298] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 1.633605] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 1.633987] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 1.635077] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 1.637458] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
- [ 1.637545] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory
- [ 1.637576] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
- [ 1.637606] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
- [ 1.637635] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
- [ 1.638569] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 1.638673] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
- [ 1.639436] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 1.641531] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
- [ 1.641642] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- [ 1.642376] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 1.645596] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
- [ 1.646550] mmc0: Starting deferred resume
- [ 1.733233] mmc0: Deferred resume completed
- [ 1.736710] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,discard
- [ 1.736732] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
- [ 1.736835] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
- [ 1.741977] EXT4-fs (mmcblk0p24): Ignoring removed nomblk_io_submit option
- [ 1.743649] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- [ 1.743665] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- [ 1.743737] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
- [ 1.744561] fs_mgr: check_fs(): unmount(/data) succeeded
- [ 1.744980] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
- [ 1.798970] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 1.798970]
- [ 1.799008] e2fsck: /dev/block/bootdevice/by-name/userdata: clean, 376/106496 files, 42522/425979 blocks
- [ 1.799008]
- [ 1.801251] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
- [ 1.801269] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- [ 1.801333] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
- [ 1.801355] fs_mgr: mount_with_alternatives(): skipping fstab dup mountpoint=/data rec[2].fs_type=f2fs already mounted as ext4.
- [ 1.805641] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 1.805657] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
- [ 1.807886] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 1.807900] SELinux: initialized (dev mmcblk0p17, type ext4), uses xattr
- [ 1.819951] SELinux: initialized (dev mmcblk0p12, type vfat), uses mountpoint labeling
- [ 1.821014] init: Starting service 'logd'...
- [ 1.848991] init: property_set("ro.product.device", "y550") failed
- [ 1.853397] logd.auditd: start
- [ 1.853421] logd.klogd: 1834061092
- [ 1.856554] init: (Loading properties from /system/build.prop took 0.03s.)
- [ 1.856631] init: (Loading properties from /vendor/build.prop took 0.00s.)
- [ 1.856670] init: (Loading properties from /factory/factory.prop took 0.00s.)
- [ 1.856823] init: /recovery not specified in fstab
- [ 1.862878] init: Starting service 'vold'...
- [ 1.867674] init: Not bootcharting.
- [ 1.979737] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
- [ 1.999628] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 224) exited with status 0
- [ 2.011098] init: Starting service 'sysinit'...
- [ 2.011806] init: (Loading properties from /data/local.prop took 0.00s.)
- [ 2.037652] mmc1: Starting deferred resume
- [ 2.080423] init: property_set("ro.product.name", "Y550-L01") failed
- [ 2.080451] init: property_set("ro.product.device", "Y550-L01") failed
- [ 2.080705] init: property_set("ro.telephony.default_network", "9") failed
- [ 2.080970] init: property_set("ro.build.fingerprint", "Huawei/Y550-L01/hwY550-L01:4.4.4/HuaweiY550-L01/C00B246:user/ota-rel-keys,release-keys") failed
- [ 2.081225] init: Starting service 'logd-reinit'...
- [ 2.081846] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
- [ 2.081865] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
- [ 2.081888] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
- [ 2.081903] init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
- [ 2.081923] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
- [ 2.081937] init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
- [ 2.081958] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
- [ 2.081972] init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
- [ 2.084108] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x86800000 to 0x8bc00000
- [ 2.089000] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xbfc00000 to 0xbfd00000
- [ 2.111326] logd.daemon: reinit
- [ 2.127068] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
- [ 2.278262] mmc1: Deferred resume completed
- [ 2.824827] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
- [ 2.929627] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 2.929862] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 2.929901] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 2.930129] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
- [ 2.930162] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
- [ 2.930194] memshare: Modem Restart has happened
- [ 2.930204] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 2.930212] of_get_named_gpio_flags: can't parse gpios property
- [ 2.930223] msm8x16-asoc-wcd sound.67: default codec configured
- [ 2.930275] of_get_named_gpio_flags: can't parse gpios property
- [ 2.930840] M-Notify: General: 7
- [ 2.930846] init: Service 'sysinit' (pid 229) exited with status 0
- [ 2.931207] init: Service 'logd-reinit' (pid 234) exited with status 0
- [ 2.931536] init: Starting service 'exec 1 (/init.qcom.early_boot.sh)'...
- [ 2.932159] msm8x16-asoc-wcd sound.67: ASoC: CODEC (null) not registered
- [ 2.932185] msm8x16-asoc-wcd sound.67: snd_soc_register_card failed (-517)
- [ 2.932223] platform sound.67: Driver msm8x16-asoc-wcd requests probe deferral
- [ 2.932445] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 2.932587] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 2.932934] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 2.932954] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 2.932987] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 2.932999] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 2.933007] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 2.933021] of_get_named_gpio_flags: can't parse gpios property
- [ 2.933026] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 2.933183] mdss_dsi_panel_init: Continuous splash enabled
- [ 2.933544] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 2.933604] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 2.933651] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 2.933655] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 2.933679] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 2.987001] init: Service 'exec 1 (/init.qcom.early_boot.sh)' (pid 243) exited with status 0
- [ 2.989479] init: Starting service 'healthd'...
- [ 2.990276] init: Starting service 'lmkd'...
- [ 2.991070] init: Starting service 'servicemanager'...
- [ 2.991978] init: Starting service 'surfaceflinger'...
- [ 2.992792] init: Starting service 'qcom-debug'...
- [ 2.993508] init: Starting service 'qcom-c_core-sh'...
- [ 2.994397] init: Starting service 'rfs_access'...
- [ 2.995575] init: Starting service 'config_bt_addr'...
- [ 2.996450] init: Starting service 'config_bluetooth'...
- [ 3.009946] init: Starting service 'qseecomd'...
- [ 3.015625] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
- [ 3.015665] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
- [ 3.015699] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
- [ 3.015731] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
- [ 3.015763] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
- [ 3.015794] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
- [ 3.015824] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
- [ 3.015859] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
- [ 3.015891] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
- [ 3.015921] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
- [ 3.015952] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
- [ 3.015985] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
- [ 3.016017] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
- [ 3.016048] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
- [ 3.016079] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
- [ 3.016111] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
- [ 3.016141] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
- [ 3.016171] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
- [ 3.016202] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
- [ 3.016232] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
- [ 3.020452] init: Starting service 'rmt_storage'...
- [ 3.021218] init: Starting service 'test_diag'...
- [ 3.021955] init: Starting service 'rmt_oeminfo'...
- [ 3.026121] init: Service 'qcom-debug' (pid 255) exited with status 127
- [ 3.027860] init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.
- [ 3.027967] init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.
- [ 3.028063] init: Service 'qcom-c_core-sh' (pid 256) exited with status 127
- [ 3.028572] init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
- [ 3.031748] init: service 'console' requires console
- [ 3.032522] init: Starting service 'netd'...
- [ 3.033522] init: Starting service 'debuggerd'...
- [ 3.034237] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
- [ 3.034659] init: Starting service 'ril-daemon'...
- [ 3.035649] init: Starting service 'drm'...
- [ 3.036704] init: Starting service 'media'...
- [ 3.037779] init: Starting service 'installd'...
- [ 3.038841] init: Starting service 'keystore'...
- [ 3.041680] init: cannot find '/system/bin/qcom-system-daemon', disabling 'qcomsysd'
- [ 3.041994] init: Starting service 'qcom-c_main-sh'...
- [ 3.043057] init: Starting service 'irsc_util'...
- [ 3.043777] init: cannot find '/system/bin/tftp_server', disabling 'tftp_server'
- [ 3.043852] init: cannot find '/system/bin/ptt_socket_app', disabling 'ptt_socket_app'
- [ 3.044051] init: cannot find '/system/bin/cnss_diag', disabling 'cnss_diag'
- [ 3.044268] init: cannot find '/system/bin/usb_uicc_client', disabling 'usb_uicc_daemon'
- [ 3.044611] init: Starting service 'bms-sh'...
- [ 3.045609] init: Starting service 'qcom-usb-sh'...
- [ 3.046351] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
- [ 3.051192] init: Starting service 'thermal-engine'...
- [ 3.052262] init: Starting service 'wcnss-service'...
- [ 3.053334] init: cannot find '/system/bin/imsqmidaemon', disabling 'imsqmidaemon'
- [ 3.053382] init: cannot find '/system/bin/dts_configurator', disabling 'dts_configurator'
- [ 3.053785] init: Starting service 'zygote'...
- [ 3.055560] init: Starting service 'gatekeeperd'...
- [ 3.060645] init: Starting service 'perfprofd'...
- [ 3.078777] init: Starting service 'cnd'...
- [ 3.079844] init: Starting service 'dpmd'...
- [ 3.080569] init: cannot find '/system/bin/cnss-daemon', disabling 'cnss-daemon'
- [ 3.080949] init: Starting service 'loc_launcher'...
- [ 3.081861] init: Starting service 'qcom-sh'...
- [ 3.083470] init: cannot find '/system/vendor/bin/RIDLClient.exe', disabling 'RIDL'
- [ 3.083523] init: cannot find '/system/vendor/bin/fidodaemon', disabling 'fidodaemon'
- [ 3.083863] init: Starting service 'qcamerasvr'...
- [ 3.084599] healthd: BatteryTechnologyPath not found
- [ 3.084862] init: Starting service 'time_daemon'...
- [ 3.085785] init: Starting service 'audiod'...
- [ 3.087181] init: Starting service 'ppd'...
- [ 3.088243] enable_store: android_usb: already disabled
- [ 3.088666] init: Starting service 'adbd'...
- [ 3.090194] type=1400 audit(804583.679:4): avc: denied { read write } for pid=263 comm="rmt_oeminfo" name="smem_log" dev="tmpfs" ino=9508 scontext=u:r:oeminfo:s0 tcontext=u:object_r:smem_log_device:s0 tclass=chr_file permissive=1
- [ 3.115645] init: Service 'config_bt_addr' (pid 258) exited with status 0
- [ 3.116628] init: write_file: Unable to write to '/proc/sys/kernel/sched_window_stats_policy': Invalid argument
- [ 3.116704] init: write_file: Unable to write to '/proc/sys/kernel/sched_ravg_hist_size': Invalid argument
- [ 3.116923] msm_thermal:store_cc_enabled Core control disabled
- [ 3.117038] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu0/online': Invalid argument
- [ 3.117341] msm_thermal:store_cc_enabled Core control enabled
- [ 3.153118] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu1/online': Invalid argument
- [ 3.153180] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu2/online': Invalid argument
- [ 3.153235] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu3/online': Invalid argument
- [ 3.160811] read descriptors
- [ 3.160822] read descriptors
- [ 3.160833] read strings
- [ 3.167565] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
- [ 3.210353] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
- [ 3.232566] wcnss_wlan triggered by userspace
- [ 3.232734] wcnss_pm_qos_add_request: add request
- [ 3.232746] wcnss_pm_qos_update_request: update request 100
- [ 3.233028] snoc_qosgen configured successfully
- [ 3.233046] wcnss_notif_cb: wcnss notification event: 2
- [ 3.235405] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x8be00000 to 0x8c3ff000
- [ 3.236127] wcnss_notif_cb: wcnss notification event: 6
- [ 3.240330] wcnss: IRIS Reg: 51120004
- [ 3.295015] msm_otg 78d9000.usb: Avail curr from USB = 100
- [ 3.295182] android_work: android_work: did not send uevent (0 0 (null))
- [ 3.306018] msm_camera_fill_vreg_params:91 i 4 j 0 cam_vaf
- [ 3.306027] msm_camera_fill_vreg_params:91 i 3 j 0 cam_vaf
- [ 3.340858] init: Service 'irsc_util' (pid 275) exited with status 0
- [ 3.349319] init: Service 'ppd' (pid 292) exited with status 255
- [ 3.349347] init: Service 'ppd' (pid 292) killing any children in process group
- [ 3.352753] init: Service 'keystore' (pid 272) exited with status 1
- [ 3.352780] init: Service 'keystore' (pid 272) killing any children in process group
- [ 3.360819] type=1400 audit(804583.679:5): avc: denied { open } for pid=263 comm="rmt_oeminfo" path="/dev/smem_log" dev="tmpfs" ino=9508 scontext=u:r:oeminfo:s0 tcontext=u:object_r:smem_log_device:s0 tclass=chr_file permissive=1
- [ 3.360934] type=1400 audit(804583.679:6): avc: denied { ioctl } for pid=263 comm="rmt_oeminfo" path="/dev/smem_log" dev="tmpfs" ino=9508 ioctlcmd=3001 scontext=u:r:oeminfo:s0 tcontext=u:object_r:smem_log_device:s0 tclass=chr_file permissive=1
- [ 3.361065] type=1400 audit(804583.739:7): avc: denied { mknod } for pid=262 comm="test_diag" capability=27 scontext=u:r:diag:s0 tcontext=u:r:diag:s0 tclass=capability permissive=1
- [ 3.361395] type=1400 audit(804583.739:8): avc: denied { create } for pid=262 comm="test_diag" name="__kmsg__" scontext=u:r:diag:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
- [ 3.365131] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 3.371185] msm_thermal:set_enabled enabled = 0
- [ 3.372818] msm8x16-asoc-wcd sound.67: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.372829] of_get_named_gpio_flags: can't parse gpios property
- [ 3.372840] msm8x16-asoc-wcd sound.67: default codec configured
- [ 3.372895] of_get_named_gpio_flags: can't parse gpios property
- [ 3.377538] msm-pcm-routing qcom,msm-pcm-routing.37: Control not supported for path HFP_AUX_UL_HL -> [NULL] -> INTHFP_UL_HL
- [ 3.377551] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: Failed to add route HFP_AUX_UL_HL -> NULL -> INTHFP_UL_HL
- [ 3.377571] msm-pcm-routing qcom,msm-pcm-routing.37: Control not supported for path HFP_INT_UL_HL -> [NULL] -> INTHFP_UL_HL
- [ 3.377578] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: Failed to add route HFP_INT_UL_HL -> NULL -> INTHFP_UL_HL
- [ 3.378043] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 3.378053] msm-pcm-routing qcom,msm-pcm-routing.37: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 3.386118] msm_cci_init:756: hw_version = 0x10000008
- [ 3.386760] is_exist_otp_function success i = 0
- [ 3.390112] diag: In diag_dci_write_proc, invalid data 0x00000000, peripheral: 0, len: 527
- [ 3.400927] apr_tal:Modem Is Up
- [ 3.407938] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 3.409347] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 3.386771] ov5648_sunny_p5v18g probe succeeded
- [ 3.440408] slot 0 has some other sensortype=1400 audit(804583.739:9): avc: denied { write } for pid=262 comm="test_diag" name="__kmsg__" dev="tmpfs" ino=2691 scontext=u:r:diag:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
- [ 3.479774] type=1400 audit(804583.739:10): avc: denied { open } for pid=262 comm="test_diag" path="/dev/__kmsg__" dev="tmpfs" ino=2691 scontext=u:r:diag:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
- [ 3.479880] type=1400 audit(804583.739:11): avc: denied { unlink } for pid=262 comm="test_diag" name="__kmsg__" dev="tmpfs" ino=2691 scontext=u:r:diag:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
- [ 3.511696] init: Starting service 'qmuxd'...
- [ 3.529644] wcd-spmi-core msm8x16_wcd_codec-13: Error: regulator not found
- [ 3.536098] init: Starting service 'vm_bms'...
- [ 3.537673] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 3.538655] android_usb gadget: high-speed config #1: 86000c8.android_usb
- [ 3.538669] diag: USB channel diag connected
- [ 3.538748] msm_otg 78d9000.usb: Avail curr from USB = 500
- [ 3.539174] gbam_connect_work: Bam channel is not ready
- [ 3.550946] init: Service 'bms-sh' (pid 277) exited with status 0
- [ 3.566129] init: cannot find '/system/bin/ipacm-diag', disabling 'ipacm-diag'
- [ 3.584855] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- [ 3.585317] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- [ 3.585567] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- [ 3.585802] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> VoIP mapping ok
- [ 3.586060] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- [ 3.586431] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> PRI_MI2S_RX_HOSTLESS mapping ok
- [ 3.586832] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
- [ 3.587182] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-afe-proxy-rx.14 mapping ok
- [ 3.587535] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-afe-proxy-tx.14 mapping ok
- [ 3.588140] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- [ 3.588557] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- [ 3.588933] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> TERT_MI2S_TX_HOSTLESS mapping ok
- [ 3.589467] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 3.589747] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- [ 3.590221] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> Voice2 mapping ok
- [ 3.590865] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
- [ 3.591349] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> VoLTE mapping ok
- [ 3.591856] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> VoWLAN mapping ok
- [ 3.592285] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
- [ 3.592841] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
- [ 3.593265] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM1 mapping ok
- [ 3.593673] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM2 mapping ok
- [ 3.594073] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM3 mapping ok
- [ 3.594476] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM4 mapping ok
- [ 3.594855] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> LSM5 mapping ok
- [ 3.599627] compress asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
- [ 3.600113] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> QUAT_MI2S_RX_HOSTLESS mapping ok
- [ 3.600582] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> QCHAT mapping ok
- [ 3.605304] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-pri-auxpcm.53 mapping ok
- [ 3.605705] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-pri-auxpcm.53 mapping ok
- [ 3.606084] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-bt-sco-rx.134 mapping ok
- [ 3.606421] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-bt-sco-tx.135 mapping ok
- [ 3.612450] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-int-fm-rx.137 mapping ok
- [ 3.612906] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-int-fm-tx.138 mapping ok
- [ 3.613564] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-be-afe-pcm-rx.1 mapping ok
- [ 3.613908] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-be-afe-pcm-tx.1 mapping ok
- [ 3.614258] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-t mapping ok
- [ 3.614654] msm8x16-asoc-wcd sound.67: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-r mapping ok
- [ 3.615037] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-rx mapping ok
- [ 3.615416] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-2- mapping ok
- [ 3.615809] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> qcom,msm-dai-q6-mi2s-quat.149 mapping ok
- [ 3.616209] msm8x16-asoc-wcd sound.67: snd-soc-dummy-dai <-> qcom,msm-dai-q6-mi2s-quat.149 mapping ok
- [ 3.617646] msm8x16-asoc-wcd sound.67: msm8x16_wcd_i2s_rx1 <-> qcom,msm-dai-q6-mi2s-prim.147 mapping ok
- [ 3.622651] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-mi2s-sec.148 mapping ok
- [ 3.623094] msm8x16-asoc-wcd sound.67: msm8x16_wcd_i2s_tx1 <-> qcom,msm-dai-q6-mi2s-tert.150 mapping ok
- [ 3.623479] msm8x16-asoc-wcd sound.67: msm-stub-rx <-> qcom,msm-dai-q6-bt-a2dp-rx.136 mapping ok
- [ 3.639698] init: cannot find '/system/bin/ipacm', disabling 'ipacm'
- [ 3.649158] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset
- [ 3.679536] input: msm8x16-skuh-snd-card Button Jack as /devices/soc.0/sound.67/sound/card0/input5
- [ 3.679972] input: msm8x16-skuh-snd-card Headset Jack as /devices/soc.0/sound.67/sound/card0/input6
- [ 3.680849] of_get_named_gpio_flags: can't parse gpios property
- [ 3.680857] msm8x16_asoc_machine_probe: failed to get spk_en_gpio
- [ 3.681096] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 3.681252] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 3.681597] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 3.681617] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 3.681652] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 3.681665] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 3.681672] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 3.681686] of_get_named_gpio_flags: can't parse gpios property
- [ 3.681691] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 3.681876] mdss_dsi_panel_init: Continuous splash enabled
- [ 3.682313] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 3.682378] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 3.682431] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 3.682435] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 3.682465] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 3.682799] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 3.725541] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 3.725699] mdss_dsi_panel_init: Panel Name = BOE_NT35512_4P5_FWVGA_VIDEO
- [ 3.726039] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 3.726059] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 3.726093] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 3.726104] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 3.726112] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 3.726126] of_get_named_gpio_flags: can't parse gpios property
- [ 3.726131] mdss_dsi_parse_panel_features:1416, Disp_en gpio not specified
- [ 3.726292] mdss_dsi_panel_init: Continuous splash enabled
- [ 3.726719] dsi_panel_device_register+0xe8/0xa9c->msm_dss_config_vreg: vsp get failed. rc=-517
- [ 3.726790] mdss_dsi_regulator_init: failed to init vregs for PANEL_PM
- [ 3.726838] dsi_panel_device_register: failed to init regulator, rc=-517
- [ 3.726845] mdss_dsi_ctrl_probe: dsi panel dev reg failed
- [ 3.726878] platform 1a98000.qcom,mdss_dsi: Driver mdss_dsi_ctrl requests probe deferral
- [ 3.727143] platform qcom,mdss_fb_wfd.124: Driver mdss_fb requests probe deferral
- [ 3.736801] init: Starting service 'netmgrd'...
- [ 3.774960] init: Service 'qcom-c_main-sh' (pid 274) exited with status 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement