Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- => setenv serverip 192.168.255.1
- => setenv ipaddr 192.168.255.2
- =>
- => tftpboot 0x82000000 zImage; tftpboot 0x83000000 bbx15.dtb; tftpboot 0x84000000 rootfs.img.gz; tftpboot 0x85000000 xen;
- link up on port 0, speed 100, full duplex
- Using ethernet@48484000 device
- TFTP from server 192.168.255.1; our IP address is 192.168.255.2
- Filename 'zImage'.
- Load address: 0x82000000
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ###################
- 747.1 KiB/s
- done
- Bytes transferred = 8864256 (874200 hex)
- link up on port 0, speed 100, full duplex
- Using ethernet@48484000 device
- TFTP from server 192.168.255.1; our IP address is 192.168.255.2
- Filename 'bbx15.dtb'.
- Load address: 0x83000000
- Loading: #########
- 5.3 MiB/s
- done
- Bytes transferred = 128660 (1f694 hex)
- link up on port 0, speed 100, full duplex
- Using ethernet@48484000 device
- TFTP from server 192.168.255.1; our IP address is 192.168.255.2
- Filename 'rootfs.img.gz'.
- Load address: 0x84000000
- Loading: #################################################################
- ###############
- 5.5 MiB/s
- done
- Bytes transferred = 1173440 (11e7c0 hex)
- link up on port 0, speed 100, full duplex
- Using ethernet@48484000 device
- TFTP from server 192.168.255.1; our IP address is 192.168.255.2
- Filename 'xen'.
- Load address: 0x85000000
- Loading: #############################################################
- 5.5 MiB/s
- done
- Bytes transferred = 884744 (d8008 hex)
- => fdt addr 0x83000000
- => fdt resize
- => fdt set /chosen \#address-cells <1>
- => fdt set /chosen \#size-cells <1>
- => fdt set /chosen xen,xen-bootargs \"$xen_bootargs\"
- => fdt mknod /chosen module@0
- => fdt set /chosen/module@0 compatible "xen,linux-zimage" "xen,multiboot-module"
- => fdt set /chosen/module@0 reg <0x82000000 0x874200>
- => fdt set /chosen/module@0 bootargs "rw root=/dev/ram rdinit=/sbin/init console=hvc0 initrd=0x84000000,32M earlyprintk=s"
- => fdt mknod /chosen module@1
- => fdt set /chosen/module@1 compatible "xen,linux-initrd" "xen,multiboot-module"
- => fdt set /chosen/module@1 reg <0x84000000 0x11e7c0>
- => fdt set /timer clock-frequency <24000000>
- => bootz 0x85000000 - 0x83000000
- ## Flattened Device Tree blob at 83000000
- Booting using the fdt blob at 0x83000000
- Loading Device Tree to 8ffdd000, end 8fffffff ... OK
- ft_fixup_clocks failed for DSP voltage domain: FDT_ERR_NOTFOUND
- Starting kernel ...
- - UART enabled -
- - CPU 00000000 booting -
- - Xen starting in Hyp mode -
- - Zero BSS -
- - Setting up control registers -
- - Turning on paging -
- - Ready -
- (XEN) Checking for initrd in /chosen
- (XEN) RAM: 0000000080000000 - 00000000ffffffff
- (XEN)
- (XEN) MODULE[0]: 000000008ffdd000 - 000000008fffd000 Device Tree
- (XEN) MODULE[1]: 0000000084000000 - 000000008411e7c0 Ramdisk
- (XEN) MODULE[2]: 0000000082000000 - 0000000082874200 Kernel
- (XEN) RESVD[0]: 0000000083000000 - 0000000083020000
- (XEN) RESVD[1]: 000000008ffdd000 - 000000008fffd000
- (XEN)
- (XEN) CMDLINE[0000000082000000]:chosen rw root=/dev/ram rdinit=/sbin/init console=hvc0 initrd=0x84000000,32M earlyprintk=t
- (XEN)
- (XEN) Command line:
- (XEN) Xen heap: 00000000fc000000-0000000100000000 (16384 pages)
- (XEN) Dom heap: 507904 pages
- (XEN) Domain heap initialised
- (XEN) Booting using Device Tree
- (XEN) Platform: TI DRA7
- (XEN) Taking dtuart configuration from /chosen/stdout-path
- (XEN) Looking for dtuart at "/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0", options ""
- (XEN) omap-uart: Unable to retrieve the IRQ
- (XEN) Unable to initialize dtuart: -22
- (XEN) Bad console= option 'dtuart'
- Xen 4.13-unstable
- (XEN) Xen version 4.13-unstable (reprofy@local) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) debug=y Wed Jun 19 23:59
- (XEN) Latest ChangeSet: Wed Jun 19 15:47:31 2019 +0200 git:2d76ae7aac-dirty
- (XEN) build-id: 424fd28e99de2ea54de82c654f2c29b039003295
- (XEN) Processor: 412fc0f2: "ARM Limited", variant: 0x2, part 0xc0f, rev 0x2
- (XEN) 32-bit Execution:
- (XEN) Processor Features: 00001131:00011011
- (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle
- (XEN) Extensions: GenericTimer Security
- (XEN) Debug Features: 02010555
- (XEN) Auxiliary Features: 00000000
- (XEN) Memory Model Features: 10201105 20000000 01240000 02102211
- (XEN) ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000
- (XEN) Set AuxCoreBoot1 to 000000008500004c (0020004c)
- (XEN) Set AuxCoreBoot0 to 0x20
- (XEN) SMP: Allowing 2 CPUs
- (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz
- (XEN) GICv2 initialization:
- (XEN) gic_dist_addr=0000000048211000
- (XEN) gic_cpu_addr=0000000048212000
- (XEN) gic_hyp_addr=0000000048214000
- (XEN) gic_vcpu_addr=0000000048216000
- (XEN) gic_maintenance_irq=25
- (XEN) GICv2: 192 lines, 2 cpus, secure (IID 0000043b).
- (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
- (XEN) Initializing Credit2 scheduler
- (XEN) load_precision_shift: 18
- (XEN) load_window_shift: 30
- (XEN) underload_balance_tolerance: 0
- (XEN) overload_balance_tolerance: -3
- (XEN) runqueues arrangement: socket
- (XEN) cap enforcement granularity: 10ms
- (XEN) load tracking window length 1073741824 ns
- (XEN) Adding cpu 0 to runqueue 0
- (XEN) First cpu on runqueue, activating
- (XEN) Allocated console ring of 16 KiB.
- (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0
- (XEN) Bringing up CPU1
- - CPU 00000001 booting -
- - Xen starting in Hyp mode -
- - Setting up control registers -
- - Turning on paging -
- - Ready -
- (XEN) Adding cpu 1 to runqueue 0
- (XEN) CPU 1 booted.
- (XEN) Brought up 2 CPUs
- (XEN) P2M: 40-bit IPA
- (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558
- (XEN) I/O virtualisation disabled
- (XEN) alternatives: Patching with alt table 002aa248 -> 002aa2b4
- (XEN) CPU0 will execute ICIALLU on guest exit
- (XEN) CPU1 will execute ICIALLU on guest exit
- (XEN) *** LOADING DOMAIN 0 ***
- (XEN) Loading d0 kernel from boot module @ 0000000082000000
- (XEN) Loading ramdisk from boot module @ 0000000084000000
- (XEN) Allocating 1:1 mappings totalling 512MB for dom0:
- (XEN) BANK[0] 0x000000a0000000-0x000000c0000000 (512MB)
- (XEN) Grant table range: 0x00000085000000-0x00000085040000
- (XEN) Allocating PPI 16 for event channel interrupt
- (XEN) Loading zImage from 0000000082000000 to 00000000a7600000-00000000a7e74200
- (XEN) Loading dom0 initrd from 0000000084000000 to 0x00000000a8200000-0x00000000a831e7c0
- (XEN) Loading dom0 DTB to 0x00000000a8000000-0x00000000a801f69d
- (XEN) Initial low memory virq threshold set at 0x4000 pages.
- (XEN) Scrubbing Free RAM in background
- (XEN) Std. Loglevel: All
- (XEN) Guest Loglevel: All
- (XEN) ***************************************************
- (XEN) PLEASE SPECIFY dom0_mem PARAMETER - USING 512M FOR NOW
- (XEN) ***************************************************
- (XEN) 3... 2... 1...
- (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
- (XEN) Freed 348kB init memory.
- (XEN) traps.c:1998:d0v0 HSR=0x90000045 pc=0xc0e525cc gva=0xefdfffd8 gpa=0x000000cfdfffd8
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement