API tools faq
paste
virtualm

dmesg

virtualm
Mar 19th, 2011
497
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.90 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:/bin# dmesg
  2. Linux version 2.6.32.25 ([email protected]) (gcc version 4.3.3 (GCC) ) #1 Sat Nov 27 23:28:25 EET 2010
  3. CPU revision is: 0002901a (Broadcom BCM3302)
  4. ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0F, vendor 0x4243)
  5. ssb: Core 1 found: GBit Ethernet (cc 0x81F, rev 0x00, vendor 0x4243)
  6. ssb: Core 2 found: USB 2.0 Host (cc 0x819, rev 0x00, vendor 0x4243)
  7. ssb: Core 3 found: USB 2.0 Device (cc 0x81A, rev 0x02, vendor 0x4243)
  8. ssb: Core 4 found: PCI (cc 0x804, rev 0x0B, vendor 0x4243)
  9. ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x07, vendor 0x4243)
  10. ssb: Core 6 found: PATA (cc 0x81D, rev 0x00, vendor 0x4243)
  11. ssb: Core 7 found: IPSEC (cc 0x80B, rev 0x03, vendor 0x4243)
  12. ssb: Core 8 found: MEMC SDRAM (cc 0x80F, rev 0x03, vendor 0x4243)
  13. ssb: Core 9 found: SATA XOR-DMA (cc 0x81E, rev 0x00, vendor 0x4243)
  14. ssb: chipcommon status is 0x0
  15. ssb: Initializing MIPS core...
  16. ssb: set_irq: core 0x080b, irq 4 => 2
  17. ssb: set_irq: core 0x081f, irq 5 => 4
  18. ssb: set_irq: core 0x0819, irq 3 => 5
  19. ssb: after irq reconfiguration
  20. ssb: core 0x0800, irq : 2(S)* 3 4 5 6 D I
  21. ssb: core 0x081f, irq : 2(S) 3 4* 5 6 D I
  22. ssb: core 0x0819, irq : 2(S) 3 4 5* 6 D I
  23. ssb: core 0x081a, irq : 2(S)* 3 4 5 6 D I
  24. ssb: core 0x0804, irq : 2(S) 3 4 5 6* D I
  25. ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I
  26. ssb: core 0x081d, irq : 2(S) 3 4 5 6 D* I
  27. ssb: core 0x080b, irq : 2(S)* 3 4 5 6 D I
  28. ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I*
  29. ssb: core 0x081e, irq : 2(S)* 3 4 5 6 D I
  30. ssb: Sonics Silicon Backplane found at address 0x18000000
  31. Serial init done.
  32. Determined physical RAM map:
  33. memory: 04000000 @ 00000000 (usable)
  34. Initrd not found or empty - disabling initrd
  35. Zone PFN ranges:
  36. Normal 0x00000000 -> 0x00004000
  37. Movable zone start PFN for each node
  38. early_node_map[1] active PFN ranges
  39. 0: 0x00000000 -> 0x00004000
  40. On node 0 totalpages: 16384
  41. free_area_init_node: node 0, pgdat 80283d30, node_mem_map 81000000
  42. Normal zone: 128 pages used for memmap
  43. Normal zone: 0 pages reserved
  44. Normal zone: 16256 pages, LIFO batch:3
  45. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  46. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  47. PID hash table entries: 256 (order: -2, 1024 bytes)
  48. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  49. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  50. Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
  51. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  52. Memory: 62032k/65536k available (2228k kernel code, 3432k reserved, 344k data, 136k init, 0k highmem)
  53. Hierarchical RCU implementation.
  54. NR_IRQS:128
  55. console [ttyS0] enabled
  56. Calibrating delay loop... 299.00 BogoMIPS (lpj=598016)
  57. Mount-cache hash table entries: 512
  58. NET: Registered protocol family 16
  59. bio: create slab <bio-0> at 0
  60. Switching to clocksource MIPS
  61. ssb: PCIcore in host mode found
  62. PCI: Fixing up bridge 0000:00:00.0
  63. PCI: Setting latency timer of device 0000:00:00.0 to 64
  64. PCI: Fixing up device 0000:00:00.0
  65. PCI: Fixing latency timer of device 0000:00:00.0 to 168
  66. pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
  67. pci 0000:00:00.0: reg 14 32bit mmio pref: [0x000000-0x7ffffff]
  68. pci 0000:00:01.0: reg 10 32bit mmio: [0x000000-0x003fff]
  69. pci 0000:00:02.0: reg 10 32bit mmio: [0x000000-0x003fff]
  70. pci 0000:01:00.0: reg 10 64bit mmio: [0x18010000-0x1801ffff]
  71. pci 0000:01:00.0: PME# supported from D3hot D3cold
  72. pci 0000:01:00.0: PME# disabled
  73. NET: Registered protocol family 2
  74. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  75. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  76. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  77. TCP: Hash tables configured (established 2048 bind 2048)
  78. TCP reno registered
  79. NET: Registered protocol family 1
  80. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  81. Registering mini_fo version $Id$
  82. JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  83. msgmni has been set to 121
  84. io scheduler noop registered
  85. io scheduler deadline registered (default)
  86. Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
  87. serial8250: ttyS0 at MMIO 0xb8000300 (irq = 2) is a 16550A
  88. serial8250: ttyS1 at MMIO 0xb8000400 (irq = 2) is a 16550A
  89. serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a 16550A
  90. serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 2) is a 16550A
  91. flash init: 0x1c000000 0x02000000
  92. Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
  93. Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
  94. Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
  95. Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
  96. CFI mfr 0x0000007f
  97. CFI id 0x000022cb
  98. Amd/Fujitsu Extended Query Table at 0x0040
  99. Amd/Fujitsu Extended Query version 1.1.
  100. number of CFI chips: 1
  101. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  102. Flash device: 0x800000 at 0x1fc00000
  103. bootloader size: 262144
  104. Creating 4 MTD partitions on "Physically mapped flash":
  105. 0x000000000000-0x000000040000 : "cfe"
  106. 0x000000040000-0x0000007f0000 : "linux"
  107. 0x000000112c00-0x0000007f0000 : "rootfs"
  108. mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  109. mtd: partition "rootfs" set to be root filesystem
  110. mtd: partition "rootfs_data" created automatically, ofs=4E0000, len=310000
  111. 0x0000004e0000-0x0000007f0000 : "rootfs_data"
  112. 0x0000007f0000-0x000000800000 : "nvram"
  113. BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
  114. TCP westwood registered
  115. NET: Registered protocol family 17
  116. 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
  117. All bugs added by David S. Miller <[email protected]>
  118. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  119. Freeing unused kernel memory: 136k freed
  120. Please be patient, while OpenWrt loads ...
  121. diag: Detected 'Linksys WRT54G/GS/GL'
  122. roboswitch: Probing device eth0: No such device
  123. roboswitch: Probing device eth1: No such device
  124. roboswitch: Probing device eth2: No such device
  125. roboswitch: Probing device eth3: No such device
  126. mini_fo: using base directory: /
  127. mini_fo: using storage directory: /overlay
  128. Compat-wireless backport release: compat-wireless-2010-10-14-7-gab01eca
  129. Backport based on wireless-testing.git master-2010-10-19
  130. cfg80211: Calling CRDA to update world regulatory domain
  131. SCSI subsystem initialized
  132. cfg80211: World regulatory domain updated:
  133. (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  134. (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  135. (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  136. (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  137. (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  138. (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  139. roboswitch: Probing device eth0: No such device
  140. roboswitch: Probing device eth1: No such device
  141. roboswitch: Probing device eth2: No such device
  142. roboswitch: Probing device eth3: No such device
  143. usbcore: registered new interface driver usbfs
  144. usbcore: registered new interface driver hub
  145. usbcore: registered new device driver usb
  146. Broadcom 43xx driver loaded [ Features: PL, GPIO LED Mask: 0x000f, Firmware-ID: FW13 ]
  147. Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
  148. PPP generic driver version 2.4.2
  149. ip_tables: (C) 2000-2006 Netfilter Core Team
  150. NET: Registered protocol family 24
  151. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  152. nf_conntrack version 0.5.0 (972 buckets, 3888 max)
  153. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  154. ohci_hcd ssb0:1: SSB OHCI Controller
  155. ohci_hcd ssb0:1: new USB bus registered, assigned bus number 1
  156. ohci_hcd ssb0:1: irq 5, io mem 0x18002000
  157. usb usb1: configuration #1 chosen from 1 choice
  158. hub 1-0:1.0: USB hub found
  159. hub 1-0:1.0: 2 ports detected
  160. ohci_hcd ssb0:1: SSB EHCI Controller
  161. ohci_hcd ssb0:1: new USB bus registered, assigned bus number 2
  162. ohci_hcd ssb0:1: irq 5, io mem 0x18002800
  163. ohci_hcd ssb0:1: USB 0.0 started, EHCI 1.00
  164. usb usb2: configuration #1 chosen from 1 choice
  165. hub 2-0:1.0: USB hub found
  166. hub 2-0:1.0: 2 ports detected
  167. uhci_hcd: USB Universal Host Controller Interface driver
  168. usbcore: registered new interface driver snd-usb-audio
  169. usbcore: registered new interface driver usbserial
  170. USB Serial support registered for generic
  171. usbcore: registered new interface driver usbserial_generic
  172. usbserial: USB Serial Driver core
  173. Initializing USB Mass Storage driver...
  174. usbcore: registered new interface driver usb-storage
  175. USB Mass Storage support registered.
  176. USB Serial support registered for FTDI USB Serial Device
  177. usbcore: registered new interface driver ftdi_sio
  178. ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
  179. USB Serial support registered for GSM modem (1-port)
  180. usbcore: registered new interface driver option
  181. option: v0.7.2:USB Driver for GSM modems
  182. fuse init (API version 7.13)
  183. fuse init: DCACHE_BUG enabled
  184. root@OpenWrt:/bin#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!