Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Model Family: HGST Travelstar 7K1000
- Device Model: HGST HTS721010A9E630
- Serial Number: JR100X6P2HSKKE
- LU WWN Device Id: 5 000cca 7dce3590a
- Firmware Version: JB0OA3J0
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Apr 20 09:59:06 2017 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off supp
- ort.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 180) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
- FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always -
- 0
- 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline -
- 0
- 3 Spin_Up_Time 0x0007 143 143 033 Pre-fail Always -
- 2
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always -
- 764
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always -
- 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always -
- 0
- 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline -
- 0
- 9 Power_On_Hours 0x0012 071 071 000 Old_age Always -
- 12899
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always -
- 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always -
- 760
- 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always -
- 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always -
- 59
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always -
- 990
- 194 Temperature_Celsius 0x0002 162 162 000 Old_age Always -
- 37 (Min/Max 16/82)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always -
- 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always -
- 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline -
- 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always -
- 0
- 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always -
- 0
- SMART Error Log Version: 1
- ATA Error Count: 109 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 109 occurred at disk power-on lifetime: 12885 hours (536 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle
- .
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 4f af 24 00 Error: WP at LBA = 0x0024af4f = 2404175
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 68 18 f6 95 40 00 6d+23:41:01.944 WRITE FPDMA QUEUED
- 61 08 60 10 f6 95 40 00 6d+23:41:01.944 WRITE FPDMA QUEUED
- 60 01 58 4f af 24 40 00 6d+23:41:01.775 READ FPDMA QUEUED
- 61 40 50 c0 96 ff 40 00 6d+23:41:01.775 WRITE FPDMA QUEUED
- 2f 00 01 10 00 00 28 00 6d+23:41:01.766 READ LOG EXT
- Error 108 occurred at disk power-on lifetime: 12885 hours (536 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle
- .
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 4e af 24 00 Error: WP at LBA = 0x0024af4e = 2404174
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 40 48 80 96 ff 40 00 6d+23:40:59.176 WRITE FPDMA QUEUED
- 60 08 40 30 4b b5 40 00 6d+23:40:58.842 READ FPDMA QUEUED
- 60 08 38 38 4b b5 40 00 6d+23:40:58.841 READ FPDMA QUEUED
- 60 01 30 4e af 24 40 00 6d+23:40:58.841 READ FPDMA QUEUED
- 61 08 28 78 ef 6f 40 00 6d+23:40:58.826 WRITE FPDMA QUEUED
- Error 107 occurred at disk power-on lifetime: 12885 hours (536 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle
- .
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 4d af 24 00 Error: UNC at LBA = 0x0024af4d = 2404173
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 20 d8 4a b5 40 00 6d+23:40:55.903 READ FPDMA QUEUED
- 60 08 18 e8 4a b5 40 00 6d+23:40:55.899 READ FPDMA QUEUED
- 60 01 10 4d af 24 40 00 6d+23:40:55.899 READ FPDMA QUEUED
- 61 40 08 00 97 ff 40 00 6d+23:40:55.876 WRITE FPDMA QUEUED
- 60 08 f8 e0 4a b5 40 00 6d+23:40:55.876 READ FPDMA QUEUED
- Error 106 occurred at disk power-on lifetime: 12885 hours (536 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle
- .
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 4c af 24 00 Error: UNC at LBA = 0x0024af4c = 2404172
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 01 00 4c af 24 40 00 6d+23:40:52.954 READ FPDMA QUEUED
- 60 08 f8 e0 4a b5 40 00 6d+23:40:52.954 READ FPDMA QUEUED
- 61 40 f0 c0 96 ff 40 00 6d+23:40:52.954 WRITE FPDMA QUEUED
- ea 00 00 00 00 00 00 00 6d+23:40:52.900 FLUSH CACHE EXT
- 60 08 c0 08 d5 bb 40 00 6d+23:40:52.876 READ FPDMA QUEUED
- Error 105 occurred at disk power-on lifetime: 12885 hours (536 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle
- .
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 4b af 24 00 Error: WP at LBA = 0x0024af4b = 2404171
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 e0 20 e2 7b 40 00 6d+23:40:49.953 WRITE FPDMA QUEUED
- 61 f8 d8 c0 5b 7d 40 00 6d+23:40:49.953 WRITE FPDMA QUEUED
- 61 08 d0 98 b0 d8 40 00 6d+23:40:49.952 WRITE FPDMA QUEUED
- 60 01 c8 4b af 24 40 00 6d+23:40:49.952 READ FPDMA QUEUED
- 60 08 c0 08 d5 bb 40 00 6d+23:40:49.952 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA
- _of_first_error
- # 1 Short offline Completed without error 00% 12884 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement