API tools faq
paste
Advertisement
tuxor

esata on Fedora 16 (Kernel 3.1.8)

tuxor
Jan 15th, 2012
289
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.80 KB | None | 0 0
raw download clone embed print report
  1. [ 81.241146] usb 2-2: new high speed USB device number 3 using ehci_hcd
  2. [ 81.358357] usb 2-2: New USB device found, idVendor=152d, idProduct=2336
  3. [ 81.358365] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  4. [ 81.358372] usb 2-2: Product: JM20336 SATA, USB Combo
  5. [ 81.358378] usb 2-2: Manufacturer: JMicron
  6. [ 81.358382] usb 2-2: SerialNumber: 1F9F50048188
  7. [ 81.711222] Initializing USB Mass Storage driver...
  8. [ 81.711374] scsi6 : usb-storage 2-2:1.0
  9. [ 81.711460] usbcore: registered new interface driver usb-storage
  10. [ 81.711461] USB Mass Storage support registered.
  11. [ 82.713872] scsi 6:0:0:0: Direct-Access SAMSUNG HM500JI PQ: 0 ANSI: 2 CCS
  12. [ 82.715637] sd 6:0:0:0: Attached scsi generic sg1 type 0
  13. [ 82.716083] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  14. [ 82.717338] sd 6:0:0:0: [sdb] Write Protect is off
  15. [ 82.717347] sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00
  16. [ 82.718463] sd 6:0:0:0: [sdb] Asking for cache data failed
  17. [ 82.718471] sd 6:0:0:0: [sdb] Assuming drive cache: write through
  18. [ 82.721955] sd 6:0:0:0: [sdb] Asking for cache data failed
  19. [ 82.721963] sd 6:0:0:0: [sdb] Assuming drive cache: write through
  20. [ 82.788505] sdb: sdb1
  21. [ 82.791683] sd 6:0:0:0: [sdb] Asking for cache data failed
  22. [ 82.791686] sd 6:0:0:0: [sdb] Assuming drive cache: write through
  23. [ 82.791689] sd 6:0:0:0: [sdb] Attached SCSI disk
  24. [ 83.196124] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  25. [ 98.298181] usb 2-2: device descriptor read/64, error -110
  26. [ 98.689180] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  27. [ 109.193055] usb 2-2: device not accepting address 3, error -110
  28. [ 109.295113] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  29. [ 134.246380] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
  30. [ 134.453058] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  31. [ 134.568479] sd 6:0:0:0: [sdb] Unhandled error code
  32. [ 134.568483] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
  33. [ 134.568488] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 28 20 00 00 08 00
  34. [ 134.568498] end_request: I/O error, dev sdb, sector 10272
  35. [ 134.753060] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  36. [ 149.855035] usb 2-2: device descriptor read/64, error -110
  37. [ 150.106033] usb 2-2: device descriptor read/64, error -71
  38. [ 150.309048] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  39. [ 150.459074] usb 2-2: device descriptor read/64, error -71
  40. [ 150.710067] usb 2-2: device descriptor read/64, error -71
  41. [ 150.913114] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  42. [ 151.347116] usb 2-2: device not accepting address 3, error -71
  43. [ 151.449120] usb 2-2: reset high speed USB device number 3 using ehci_hcd
  44. [ 151.883137] usb 2-2: device not accepting address 3, error -71
  45. [ 151.883172] sd 6:0:0:0: [sdb] Unhandled error code
  46. [ 151.883175] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
  47. [ 151.883179] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 28 28 00 00 08 00
  48. [ 151.883190] end_request: I/O error, dev sdb, sector 10280
  49. [ 151.883194] usb 2-2: USB disconnect, device number 3
  50. [ 151.883229] sd 6:0:0:0: [sdb] Unhandled error code
  51. [ 151.883231] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
  52. [ 151.883234] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 28 30 00 00 f0 00
  53. [ 151.883239] end_request: I/O error, dev sdb, sector 10288
  54. [ 151.889050] sd 6:0:0:0: [sdb] Unhandled error code
  55. [ 151.889054] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
  56. [ 151.889058] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 28 38 00 00 e8 00
  57. [ 151.889068] end_request: I/O error, dev sdb, sector 10296
  58. [ 151.889090] sd 6:0:0:0: [sdb] Unhandled error code
  59. [ 151.889092] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
  60. [ 151.889096] sd 6:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 28 18 00 00 08 00
  61. [ 151.889105] end_request: I/O error, dev sdb, sector 10264
  62. [ 151.889161] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3308: inode #8: block 1027: comm mount: unable to read itable block
  63. [ 151.889173] EXT4-fs (sdb1): no journal found
  64. [ 151.991085] usb 2-2: new high speed USB device number 4 using ehci_hcd
  65. [ 152.141080] usb 2-2: device descriptor read/64, error -71
  66. [ 152.392094] usb 2-2: device descriptor read/64, error -71
  67. [ 152.595090] usb 2-2: new high speed USB device number 5 using ehci_hcd
  68. [ 152.745088] usb 2-2: device descriptor read/64, error -71
  69. [ 152.996092] usb 2-2: device descriptor read/64, error -71
  70. [ 153.199076] usb 2-2: new high speed USB device number 6 using ehci_hcd
  71. [ 153.633113] usb 2-2: device not accepting address 6, error -71
  72. [ 153.735079] usb 2-2: new high speed USB device number 7 using ehci_hcd
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!