API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 9th, 2020
121
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.83 KB | None | 0 0
raw download clone embed print report
  1. U-Boot TPL 2020.07-armbian (Sep 07 2020 - 23:14:57)
  2. Channel 0: LPDDR4, 50MHz
  3. BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  4. Channel 1: LPDDR4, 50MHz
  5. BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  6. 256B stride
  7. 256B stride
  8. lpddr4_set_rate: change freq to 400000000 mhz 0, 1
  9. lpddr4_set_rate: change freq to 800000000 mhz 1, 0
  10. Trying to boot from BOOTROM
  11. Returning to boot ROM...
  12.  
  13. U-Boot SPL 2020.07-armbian (Sep 07 2020 - 23:14:57 +0200)
  14. Trying to boot from SPI
  15. NOTICE: BL31: v1.3(debug):42583b6
  16. NOTICE: BL31: Built : 07:55:13, Oct 15 2019
  17. NOTICE: BL31: Rockchip release version: v1.1
  18. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  19. INFO: Using opteed sec cpu_context!
  20. INFO: boot cpu mask: 0
  21. INFO: If lpddr4 need support multi frequency,
  22. INFO: please update loader!
  23. INFO: Current ctl index[0] freq=400MHz
  24. INFO: Current ctl index[1] freq=800MHz
  25. INFO: plat_rockchip_pmu_init(1190): pd status 3e
  26. INFO: BL31: Initializing runtime services
  27. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  28. ERROR: Error initializing runtime service opteed_fast
  29. INFO: BL31: Preparing for EL3 exit to normal world
  30. INFO: Entry point address = 0x200000
  31. INFO: SPSR = 0x3c9
  32.  
  33.  
  34. U-Boot 2020.07-armbian (Sep 07 2020 - 23:14:57 +0200)
  35.  
  36. SoC: Rockchip rk3399
  37. Reset cause: POR
  38. Model: Radxa ROCK Pi 4B
  39. DRAM: 3.9 GiB
  40. PMIC: RK808
  41. MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
  42. Loading Environment from SPI Flash... SF: Detected XT25F128B with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  43. *** Warning - bad CRC, using default environment
  44.  
  45. In: serial
  46. Out: serial
  47. Err: serial
  48. Model: Radxa ROCK Pi 4B
  49. Net: eth0: ethernet@fe300000
  50. Hit any key to stop autoboot: 0
  51. Card did not respond to voltage select!
  52. switch to partitions #0, OK
  53. mmc0(part 0) is current device
  54. ** No partition table - mmc 0 **
  55.  
  56. Device 0: Vendor: 0x126f Rev: 42B4S8JA Prod: F946281766
  57. Type: Hard Disk
  58. Capacity: 244198.3 MB = 238.4 GB (500118192 x 512)
  59. ... is now current device
  60. Scanning nvme 0:1...
  61. Found U-Boot script /boot/boot.scr
  62. 3185 bytes read in 3 ms (1 MiB/s)
  63. ## Executing script at 00500000
  64. Boot script loaded from nvme 0
  65. 156 bytes read in 3 ms (50.8 KiB/s)
  66. 12278378 bytes read in 31 ms (377.7 MiB/s)
  67. 27275776 bytes read in 66 ms (394.1 MiB/s)
  68. 74352 bytes read in 3 ms (23.6 MiB/s)
  69. 2698 bytes read in 2 ms (1.3 MiB/s)
  70. Applying kernel provided DT fixup script (rockchip-fixup.scr)
  71. ## Executing script at 09000000
  72. ## Loading init Ramdisk from Legacy Image at 06000000 ...
  73. Image Name: uInitrd
  74. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  75. Data Size: 12278314 Bytes = 11.7 MiB
  76. Load Address: 00000000
  77. Entry Point: 00000000
  78. Verifying Checksum ... OK
  79. ## Flattened Device Tree blob at 01f00000
  80. Booting using the fdt blob at 0x1f00000
  81. Loading Ramdisk to f135d000, end f1f12a2a ... OK
  82. Loading Device Tree to 00000000f12e2000, end 00000000f135cfff ... OK
  83.  
  84. Starting kernel ...
  85.  
  86. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  87. [ 0.000000] Linux version 5.8.7-rockchip64 (root@armbianMaker) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #trunk SMP PREEMPT Sun Sep 6 05:10:04 CEST 2020
  88. [ 0.000000] Machine model: Radxa ROCK Pi 4B
  89. [ 0.000000] efi: UEFI not found.
  90. [ 0.000000] cma: Reserved 128 MiB at 0x00000000e9000000
  91. [ 0.000000] NUMA: No NUMA configuration found
  92. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
  93. [ 0.000000] NUMA: NODE_DATA [mem 0xf77e2100-0xf77e3fff]
  94. [ 0.000000] Zone ranges:
  95. [ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
  96. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
  97. [ 0.000000] Normal empty
  98. [ 0.000000] Movable zone start for each node
  99. [ 0.000000] Early memory node ranges
  100. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
  101. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  102. [ 0.000000] psci: probing for conduit method from DT.
  103. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  104. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  105. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  106. [ 0.000000] psci: SMC Calling Convention v1.0
  107. [ 0.000000] percpu: Embedded 32 pages/cpu s93528 r8192 d29352 u131072
  108. [ 0.000000] Detected VIPT I-cache on CPU0
  109. [ 0.000000] CPU features: detected: ARM erratum 845719
  110. [ 0.000000] CPU features: detected: GIC system register CPU interface
  111. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
  112. [ 0.000000] Policy zone: DMA32
  113. [ 0.000000] Kernel command line: root=UUID=97bea3ed-cf7b-4500-9565-8a18fdadff6d rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=7 ubootpart= usb-storage.quirks= cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  114. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  115. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  116. [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  117. [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
  118. [ 0.000000] Memory: 3744080K/4061184K available (14396K kernel code, 2060K rwdata, 5944K rodata, 4160K init, 574K bss, 186032K reserved, 131072K cma-reserved)
  119. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  120. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  121. [ 0.000000] rcu: RCU event tracing is enabled.
  122. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  123. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  124. [ 0.000000] Rude variant of Tasks RCU enabled.
  125. [ 0.000000] Tracing variant of Tasks RCU enabled.
  126. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  127. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  128. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  129. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  130. [ 0.000000] GICv3: 256 SPIs implemented
  131. [ 0.000000] GICv3: 0 Extended SPIs implemented
  132. [ 0.000000] GICv3: Distributor has no Range Selector support
  133. [ 0.000000] GICv3: 16 PPIs implemented
  134. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  135. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  136. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2d00000 (flat, esz 8, psz 64K, shr 0)
  137. [ 0.000000] ITS: using cache flushing for cmd queue
  138. [ 0.000000] GICv3: using LPI property table @0x00000000f2ca0000
  139. [ 0.000000] GIC: using cache flushing for LPI property table
  140. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f2cb0000
  141. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  142. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  143. [ 0.000000] random: get_random_bytes called from start_kernel+0x674/0x83c with crng_init=0
  144. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  145. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  146. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  147. [ 0.001276] Console: colour dummy device 80x25
  148. [ 0.002388] printk: console [tty1] enabled
  149. [ 0.002534] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  150. [ 0.002578] pid_max: default: 32768 minimum: 301
  151. [ 0.002759] LSM: Security Framework initializing
  152. [ 0.002815] Yama: becoming mindful.
  153. [ 0.002971] AppArmor: AppArmor initialized
  154. [ 0.003082] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  155. [ 0.003137] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  156. [ 0.006358] rcu: Hierarchical SRCU implementation.
  157. [ 0.009144] Platform MSI: interrupt-controller@fee20000 domain created
  158. [ 0.009662] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  159. [ 0.011866] EFI services will not be available.
  160. [ 0.012559] smp: Bringing up secondary CPUs ...
  161. [ 0.013509] Detected VIPT I-cache on CPU1
  162. [ 0.013555] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  163. [ 0.013572] GICv3: CPU1: using allocated LPI pending table @0x00000000f2cc0000
  164. [ 0.013629] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  165. [ 0.014709] Detected VIPT I-cache on CPU2
  166. [ 0.014743] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  167. [ 0.014758] GICv3: CPU2: using allocated LPI pending table @0x00000000f2cd0000
  168. [ 0.014796] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  169. [ 0.015808] Detected VIPT I-cache on CPU3
  170. [ 0.015842] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  171. [ 0.015857] GICv3: CPU3: using allocated LPI pending table @0x00000000f2ce0000
  172. [ 0.015894] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  173. [ 0.016923] CPU features: detected: EL2 vector hardening
  174. [ 0.016933] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  175. [ 0.016939] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  176. [ 0.016947] Detected PIPT I-cache on CPU4
  177. [ 0.016980] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  178. [ 0.016995] GICv3: CPU4: using allocated LPI pending table @0x00000000f2cf0000
  179. [ 0.017034] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  180. [ 0.018040] Detected PIPT I-cache on CPU5
  181. [ 0.018070] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  182. [ 0.018084] GICv3: CPU5: using allocated LPI pending table @0x00000000f2d80000
  183. [ 0.018113] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  184. [ 0.018266] smp: Brought up 1 node, 6 CPUs
  185. [ 0.018699] SMP: Total of 6 processors activated.
  186. [ 0.018723] CPU features: detected: 32-bit EL0 Support
  187. [ 0.018748] CPU features: detected: CRC32 instructions
  188. [ 0.018773] CPU features: detected: 32-bit EL1 Support
  189. [ 0.046904] CPU: All CPU(s) started at EL2
  190. [ 0.046996] alternatives: patching kernel code
  191. [ 0.050792] devtmpfs: initialized
  192. [ 0.065260] Registered cp15_barrier emulation handler
  193. [ 0.065298] Registered setend emulation handler
  194. [ 0.066125] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  195. [ 0.066212] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  196. [ 0.069068] xor: measuring software checksum speed
  197. [ 0.108125] 8regs : 2345.000 MB/sec
  198. [ 0.148219] 32regs : 2756.000 MB/sec
  199. [ 0.188314] arm64_neon: 2225.000 MB/sec
  200. [ 0.188329] xor: using function: 32regs (2756.000 MB/sec)
  201. [ 0.188399] pinctrl core: initialize/s
  202. [ 1.355264] raid6: using algorithm neonx4 gen() 1691 MB/s
  203. [ 1.355278] raid6: .... xor() 1282 MB/s, rmw enabled
  204. [ 1.355292] raid6: using neon recovery algorithm
  205. [ 1.356585] vcc5v0_sys: supplied by vcc12v_dcin
  206. [ 1.357466] vcc3v3_pcie: supplied by vcc5v0_sys
  207. [ 1.357842] vcc3v3_sys: supplied by vcc5v0_sys
  208. [ 1.358323] vcc5v0_host: supplied by vcc5v0_sys
  209. [ 1.358552] vcc_0v9: supplied by vcc3v3_sys
  210. [ 1.358891] vcc5v0_typec: supplied by vcc5v0_sys
  211. [ 1.359702] iommu: Default domain type: Translated
  212. [ 1.362624] vgaarb: loaded
  213. [ 1.363150] SCSI subsystem initialized
  214. [ 1.363707] usbcore: registered new interface driver usbfs
  215. [ 1.363764] usbcore: registered new interface driver hub
  216. [ 1.363874] usbcore: registered new device driver usb
  217. [ 1.364485] pps_core: LinuxPPS API ver. 1 registered
  218. [ 1.364501] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  219. [ 1.364530] PTP clock support registered
  220. [ 1.364818] EDAC MC: Ver: 3.0.0
  221. [ 1.366000] NetLabel: Initializing
  222. [ 1.366018] NetLabel: domain hash size = 128
  223. [ 1.366031] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  224. [ 1.366110] NetLabel: unlabeled traffic allowed by default
  225. [ 1.366612] clocksource: Switched to clocksource arch_sys_counter
  226. [ 1.468528] VFS: Disk quotas dquot_6.6.0
  227. [ 1.468621] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  228. [ 1.469458] AppArmor: AppArmor Filesystem Enabled
  229. [ 1.477979] NET: Registered protocol family 2
  230. [ 1.478856] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  231. [ 1.479051] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  232. [ 1.479598] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  233. [ 1.480276] TCP: Hash tables configured (established 32768 bind 32768)
  234. [ 1.480468] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  235. [ 1.480643] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  236. [ 1.481015] NET: Registered protocol family 1
  237. [ 1.481062] NET: Registered protocol family 44
  238. [ 1.481086] PCI: CLS 0 bytes, default 64
  239. [ 1.481323] Trying to unpack rootfs image as initramfs...
  240. [ 2.375522] Freeing initrd memory: 11988K
  241. [ 2.376757] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  242. [ 2.377189] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  243. [ 2.377796] kvm [1]: IPA Size Limit: 40bits
  244. [ 2.378545] kvm [1]: vgic-v2@fff20000
  245. [ 2.378627] kvm [1]: GIC system register CPU interface enabled
  246. [ 2.378873] kvm [1]: vgic interrupt IRQ10
  247. [ 2.379159] kvm [1]: Hyp mode initialized successfully
  248. [ 2.390428] Initialise system trusted keyrings
  249. [ 2.390479] Key type blacklist registered
  250. [ 2.390732] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  251. [ 2.397039] zbud: loaded
  252. [ 2.398700] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  253. [ 2.399633] fuse: init (API version 7.31)
  254. [ 2.401018] integrity: Platform Keyring initialized
  255. [ 2.466041] Key type asymmetric registered
  256. [ 2.466059] Asymmetric key parser 'x509' registered
  257. [ 2.466118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  258. [ 2.466341] io scheduler mq-deadline registered
  259. [ 2.466358] io scheduler kyber registered
  260. [ 2.466499] io scheduler bfq registered
  261. [ 2.489136] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  262. [ 2.489171] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  263. [ 2.490708] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  264. [ 2.490736] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  265. [ 2.494293] pwm-regulator: supplied by regulator-dummy
  266. [ 2.495708] Serial: 8250/16550 driver, 8 ports, IRQ sh634059] tun: Universal TUN/TAP device driver, 1.6
  267. [ 2.635494] thunder_xcv, ver 1.0
  268. [ 2.635837] thunder_bgx, ver 1.0
  269. [ 2.636169] nicpf, ver 1.0
  270. [ 2.637404] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  271. [ 2.637926] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  272. [ 2.638493] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
  273. [ 2.639141] igb: Copyright (c) 2007-2014 Intel Corporation.
  274. [ 2.639694] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  275. [ 2.640391] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  276. [ 2.641191] sky2: driver version 1.30
  277. [ 2.642180] VFIO - User Level meta-driver version: 0.3
  278. [ 2.663837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  279. [ 2.664442] ehci-pci: EHCI PCI platform driver
  280. [ 2.664875] ehci-platform: EHCI generic platform driver
  281. [ 2.667648] ehci-platform fe380000.usb: EHCI Host Controller
  282. [ 2.668179] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  283. [ 2.669022] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
  284. [ 2.682631] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  285. [ 2.683430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
  286. [ 2.684172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  287. [ 2.684820] usb usb1: Product: EHCI Host Controller
  288. [ 2.685259] usb usb1: Manufacturer: Linux 5.8.7-rockchip64 ehci_hcd
  289. [ 2.685820] usb usb1: SerialNumber: fe380000.usb
  290. [ 2.686798] hub 1-0:1.0: USB hub found
  291. [ 2.687175] hub 1-0:1.0: 1 port detected
  292. [ 2.690177] ehci-platform fe3c0000.usb: EHCI Host Controller
  293. [ 2.690724] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  294. [ 2.691554] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
  295. [ 2.706636] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  296. [ 2.707405] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
  297. [ 2.708147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  298. [ 2.708793] usb usb2: Product: EHCI Host Controller
  299. [ 2.709233] usb usb2: Manufacturer: Linux 5.8.7-rockchip64 ehci_hcd
  300. [ 2.709794] usb usb2: SerialNumber: fe3c0000.usb
  301. [ 2.710711] hub 2-0:1.0: USB hub found
  302. [ 2.711089] hub 2-0:1.0: 1 port detected
  303. [ 2.712106] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  304. [ 2.712675] ohci-pci: OHCI PCI platform driver
  305. [ 2.713125] ohci-platform: OHCI generic platform driver
  306. [ 2.713839] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  307. [ 2.714455] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  308. [ 2.715295] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
  309. [ 2.778941] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
  310. [ 2.779682] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  311. [ 2.780328] usb usb3: Product: Generic Platform OHCI controller
  312. [ 2.780859] usb usb3: Manufacturer: Linux 5.8.7-rockchip64 ohci_hcd
  313. [ 2.781419] usb usb3: SerialNumber: fe3a0000.usb
  314. [ 2.782326] hub 3-0:1.0: USB hub found
  315. [ 2.782724] hub 3-0:1.0: 1 port detected
  316. [ 2.783607] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  317. [ 2.784222] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  318. [ 2.785079] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
  319. [ 2.846839] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
  320. [ 2.847581] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  321. [ 2.848228] usb usb4: Product: Generic Platform OHCI controller
  322. [ 2.848759] usb usb4: Manufacturer: Linux 5.8.7-rockchip64 ohci_hcd
  323. [ 2.849319] usb usb4: SerialNumber: fe3e0000.usb
  324. [ 2.850213] hub 4-0:1.0: USB hub found
  325. [ 2.850619] hub 4-0:1.0: 1 port detected
  326. [ 2.852313] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  327. [ 2.852833] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  328. [ 2.853674] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  329. [ 2.854569] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe800000
  330. [ 2.855529] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
  331. [ 2.856270] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  332. [ 2.856916] usb usb5: Product: xHCI Host Controller
  333. [ 2.857356] usb usb5: Manufacturer: Linux 5.8.7-rockchip64 xhci-hcd
  334. [ 2.857916] usb usb5: SerialNumber: xhci-hcd.0.auto
  335. [ 2.859050] hub 5-0:1.0: USB hub found
  336. [ 2.859456] hub 5-0:1.0: 1 port detected
  337. [ 2.860330] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  338. [ 2.860851] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  339. [ 2.861585] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  340. [ 2.862285] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  341. [ 2.863274] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
  342. [ 2.864029] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  343. [ 2.864689] usb usb6: Product: xHCI Host Controller
  344. [ 2.865138] usb usb6: Manufacturer: Linux 5.8.7-rockchip64 xhci-hcd
  345. [ 2.865711] usb usb6: SerialNumber: xhci-hcd.0.auto
  346. [ 2.866948] hub 6-0:1.0: USB hub found
  347. [ 2.867327] hub 6-0:1.0: 1 port detected
  348. [ 2.868216] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  349. [ 2.868725] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  350. [ 2.869565] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  351. [ 2.870455] xhci-hcd xhci-hcd.1.auto: irq 229, io mem 0xfe900000
  352. [ 2.871374] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
  353. [ 2.872115] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  354. [ 2.872761] usb usb7: Product: xHCI Host Controller
  355. [ 2.873201] usb usb7: Manufacturer: Linux 5.8.7-rockchip64 xhci-hcd
  356. [ 2.873762] usb usb7: SerialNumber: xhci-hcd.1.auto
  357. [ 2.874751] hub 7-0:1.0: USB hub found
  358. [ 2.875127] hub 7-0:1.0: 1 port detected
  359. [ 2.875804] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  360. [ 2.876306] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  361. [ 2.877019] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  362. [ 2.877677] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  363. [ 2.878536] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
  364. [ 2.879294] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  365. [ 2.879942] usb usb8: Product: xHCI Host Controller
  366. [ 2.880382] usb usb8: Manufacturer: Linux 5.8.7-rockchip64 xhci-hcd
  367. [ 2.880942] usb usb8: SerialNumber: xhci-hcd.1.auto
  368. [ 2.881907] hub 8-0:1.0: USB hub found
  369. [ 2.882281] hub 8-0:1.0: 1 port detected
  370. [ 2.883192] usbcore: registered new interface driver usb-storage
  371. [ 2.886027] mousedev: PS/2 mouse device common for all mice
  372. [ 2.887923] i2c /dev entries driver
  373. [ 2.894630] rk808 0-001b: chip id: 0x0
  374. [ 2.899367] rk808-regulator rk808-regulator: there is no dvs0 gpio
  375. [ 2.899947] rk808-regulator rk808-regulator: there is no dvs1 gpio
  376. [ 2.900572] DCDC_REG1: supplied by vcc5v0_sys
  377. [ 2.901862] DCDC_REG2: supplied by vcc5v0_sys
  378. [ 2.902836] DCDC_REG3: supplied by vcc5v0_sys
  379. [ 2.903513] DCDC_REG4: supplied by vcc5v0_sys
  380. [ 2.904514] LDO_REG1: supplied by vcc5v0_sys
  381. [ 2.906157] LDO_REG2: supplied by vcc5v0_sys
  382. [ 2.907525] LDO_REG3: supplied by vcc5v0_sys
  383. [ 2.909014] LDO_REG4: supplied by vcc5v0_sys
  384. [ 2.910546] LDO_REG5: supplied by vcc5v0_sys
  385. [ 2.911922] LDO_REG6: supplied by vcc5v0_sys
  386. [ 2.913407] LDO_REG7: supplied by vcc5v0_sys
  387. [ 2.914833] LDO_REG8: supplied by vcc5v0_sys
  388. [ 2.916360] SWITCH_REG1: supplied by vcc3v3_sys
  389. [ 2.917065] SWITCH_REG2: supplied by vcc3v3_sys
  390. [ 2.921328] rk808-rtc rk808-rtc: registered as rtc0
  391. [ 2.922325] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:11 UTC (1358499011)
  392. [ 2.925091] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  393. [ 2.925728] fan53555-reg: supplied by vcc5v0_sys
  394. [ 2.929271] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  395. [ 2.929905] fan53555-reg: supplied by vcc5v0_sys
  396. [ 2.939138] sdhci: Secure Digital Host Controller Interface driver
  397. [ 2.939698] sdhci: Copyright(c) Pierre Ossman
  398. [ 2.940120] Synopsys Designware Multimedia Card Interface Driver
  399. [ 2.942149] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
  400. [ 2.942829] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
  401. [ 2.943430] dwmmc_rockchip fe310000.mmc: Version ID is 270a
  402. [ 2.943983] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  403. [ 2.945059] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
  404. [ 2.945579] mmc_host mmc0: card is non-removable.
  405. [ 2.946307] random: fast init done
  406. [ 2.959364] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  407. [ 2.973670] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
  408. [ 2.974354] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
  409. [ 2.974987] dwmmc_rockchip fe320000.mmc: Version ID is 270a
  410. [ 2.975581] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
  411. [ 2.976587] dwmmc_rockchip fe320000.mmc: Got CD GPIO
  412. [ 2.989965] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  413. [ 3.004100] sdhci-pltfm: SDHCI platform and OF driver helper
  414. [ 3.006082] mmc2: CQHCI version 5.10
  415. [ 3.006641] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  416. [ 3.008752] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  417. [ 3.010855] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  418. [ 3.014236] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  419. [ 3.018287] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
  420. [ 3.031250] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  421. [ 3.034200] ledtrig-cpu: registered to indicate activity on CPUs
  422. [ 3.036440] hid: raw HID events driver (C) Jiri Kosina
  423. [ 3.037209] usbcore: registered new interface driver usbhid
  424. [ 3.037720] usbhid: USB HID core driver
  425. [ 3.044829] drop_monitor: Initializing network drop monitor service
  426. [ 3.046658] NET: Registered protocol family 10
  427. [ 3.072998] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  428. [ 3.106765] Segment Routing with IPv6
  429. [ 3.107245] NET: Registered protocol family 17
  430. [ 3.107864] 8021q: 802.1Q VLAN Support v1.8
  431. [ 3.108346] Key type dns_resolver registered
  432. [ 3.109677] registered taskstats version 1
  433. [ 3.110065] Loading compiled-in X.509 certificates
  434. [ 3.113979] Loaded X.509 cert 'Build time autogenerated kernel key: f28cd173a1441c9b7f45ec19c3648d15eb8401ca'
  435. [ 3.115107] zswap: loaded using pool lzo/zbud
  436. [ 3.115877] Key type ._fscrypt registered
  437. [ 3.116244] Key type .fscrypt registered
  438. [ 3.116598] Key type fscrypt-provisioning registered
  439. [ 3.120157] Btrfs loaded, crc32c=crc32c-generic
  440. [ 3.129656] mmc2: Command Queue Engine enabled
  441. [ 3.130074] mmc2: new HS400 Enhanced strobe MMC card at address 0001
  442. [ 3.131433] mmcblk2: mmc2:0001 D9D16G 14.5 GiB
  443. [ 3.132159] mmcblk2boot0: mmc2:0001 D9D16G partition 1 4.00 MiB
  444. [ 3.133012] mmcblk2boot1: mmc2:0001 D9D16G partition 2 4.00 MiB
  445. [ 3.133705] mmcblk2rpmb: mmc2:0001 D9D16G partition 3 4.00 MiB, chardev (243:0)
  446. [ 3.147700] Key type encrypted registered
  447. [ 3.148090] AppArmor: AppArmor sha1 policy hashing enabled
  448. [ 3.236976] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  449. [ 3.237644] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
  450. [ 3.238410] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
  451. [ 3.239506] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  452. [ 3.240105] pci_bus 0000:00: root bus resource [bus 00-1f]
  453. [ 3.240600] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  454. [ 3.241218] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  455. [ 3.242101] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  456. [ 3.242813] pci 0000:00:00.0: supports D1
  457. [ 3.243180] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  458. [ 3.248575] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  459. [ 3.249480] pci 0000:01:00.0: [126f:2262] type 00 class 0x010802
  460. [ 3.250147] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  461. [ 3.250941] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
  462. [ 3.252060] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
  463. [ 3.258118] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  464. [ 3.258750] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
  465. [ 3.259374] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64bit]
  466. [ 3.260069] pci 0000:00:00.0: PCI bridge to [bus 01]
  467. [ 3.260523] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  468. [ 3.261348] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  469. [ 3.262221] pcieport 0000:00:00.0: PME: Signaling with IRQ 240
  470. [ 3.263108] pcieport 0000:00:00.0: AER: enabled with IRQ 240
  471. [ 3.264164] nvme nvme0: pci function 0000:01:00.0
  472. [ 3.264667] nvme 0000:01:00.0: enabling device (0000 -> 0002)
  473. [ 3.266270] of_cfs_init
  474. [ 3.266528] of_cfs_init: OK
  475. [ 3.326754] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 224
  476. [ 3.332993] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  477. [ 64.482689] nvme nvme0: I/O 4 QID 0 timeout, disable controller
  478. [ 64.590646] nvme nvme0: Device shutdown incomplete; abort shutdown
  479. [ 64.591551] nvme nvme0: Identify Controller failed (881)
  480. [ 64.592047] nvme nvme0: Removing after probe failure status: -5
  481. [ 64.609456] Freeing unused kernel memory: 4160K
  482. [ 64.626862] Run /init as init process
  483. [ 65.158153] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  484. [ 65.158837] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  485. [ 65.159615] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  486. [ 65.160425] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  487. [ 65.161074] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  488. [ 65.161586] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
  489. [ 65.162115] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  490. [ 65.162787] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  491. [ 65.163414] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  492. [ 65.168984] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  493. [ 65.169810] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  494. [ 65.170458] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  495. [ 65.170970] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  496. [ 65.171641] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  497. [ 65.172311] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  498. [ 65.172780] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  499. [ 65.173408] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  500. [ 65.174030] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  501. [ 65.174563] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  502. [ 65.175120] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  503. [ 65.297046] libphy: stmmac: probed
  504. [ 65.297384] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  505. [ 65.298497] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!