Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-033) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:15:38 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037f9ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000037fa0000-0x0000000037fadfff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x0000000037fae000-0x0000000037feffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x0000000037ff0000-0x0000000037ffdfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] random: fast init done
- [ 0.000000] SMBIOS 2.5 present.
- [ 0.000000] DMI: K-Systems GeForce7050M-M/GeForce7050M-M, BIOS 080014 03/11/2008
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x37fa0 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
- [ 0.000000] 1 base 0020000000 mask FFF0000000 write-back
- [ 0.000000] 2 base 0030000000 mask FFF8000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(ptrval)]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x183fffff]
- [ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
- [ 0.000000] BRK [0x17f9d000, 0x17f9dfff] PGTABLE
- [ 0.000000] BRK [0x17f9e000, 0x17f9efff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x318c1000-0x34c57fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F9B90 000014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 0x0000000037FA0000 000044 (v01 K-Syst KSystems 20080311 MSFT 00000097)
- [ 0.000000] ACPI: FACP 0x0000000037FA0200 000084 (v02 031108 FACP1811 20080311 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 0x0000000037FA05D0 005C1E (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS 0x0000000037FAE000 000040
- [ 0.000000] ACPI: APIC 0x0000000037FA0390 000080 (v01 031108 APIC1811 20080311 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 0x0000000037FA0410 00003C (v01 031108 OEMMCFG 20080311 MSFT 00000097)
- [ 0.000000] ACPI: SLIC 0x0000000037FA0450 000176 (v01 K-Syst KSystems 20080311 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 0x0000000037FAE040 000071 (v01 031108 OEMB1811 20080311 MSFT 00000097)
- [ 0.000000] ACPI: HPET 0x0000000037FA61F0 000038 (v01 031108 OEMHPET0 20080311 MSFT 00000097)
- [ 0.000000] ACPI: NVHD 0x0000000037FAE0C0 000554 (v01 031108 NVHDCP 20080311 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 0x0000000037FA6230 0002CC (v01 A M I POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 7MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] BRK [0x17f9f000, 0x17f9ffff] PGTABLE
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
- [ 0.000000] HighMem [mem 0x00000000377fe000-0x0000000037f9ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000037f9ffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000037f9ffff]
- [ 0.000000] On node 0 totalpages: 229182
- [ 0.000000] DMA zone: 40 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] Normal zone: 2180 pages used for memmap
- [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 1954 pages, LIFO batch:0
- [ 0.000000] Reserved but unavailable: 98 pages
- [ 0.000000] Using APIC driver default
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x2008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] e820: [mem 0x37ffe000-0xfebfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93068 r0 d29812 u122880
- [ 0.000000] pcpu-alloc: s93068 r0 d29812 u122880 alloc=30*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 226962
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=dedbe1c8-fe80-4cc5-adb6-3b243cd3621d ro quiet splash vt.handoff=1
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000377fe:00037fa0)
- [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
- [ 0.000000] Memory: 836312K/916728K available (8795K kernel code, 890K rwdata, 3448K rodata, 1088K init, 848K bss, 80416K reserved, 0K cma-reserved, 7816K highmem)
- [ 0.000000] virtual kernel memory layout:
- fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
- cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
- pkmap : 0xff800000 - 0xffa00000 (2048 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xd7ced000 - 0xd7dfd000 (1088 kB)
- .data : 0xd7896c88 - 0xd7cd9980 (4363 kB)
- .text : 0xd7000000 - 0xd7896c88 (8795 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] ftrace: allocating 37746 entries in 74 pages
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
- [ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] vt handoff: transparent VT on vt#1
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 1048576 bytes of page_ext
- [ 0.000000] ACPI: Core revision 20170831
- [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] APIC: Switch to symmetric I/O mode setup
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.000000] do_IRQ: 0.55 No irq handler for vector
- [ 0.020000] tsc: Fast TSC calibration using PIT
- [ 0.024000] tsc: Detected 2693.398 MHz processor
- [ 0.024000] tsc: Marking TSC unstable due to TSCs unsynchronized
- [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5386.79 BogoMIPS (lpj=10773592)
- [ 0.024000] pid_max: default: 32768 minimum: 301
- [ 0.024000] Security Framework initialized
- [ 0.024000] Yama: becoming mindful.
- [ 0.024000] AppArmor: AppArmor initialized
- [ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.024000] CPU: Physical Processor ID: 0
- [ 0.024000] CPU: Processor Core ID: 0
- [ 0.024000] mce: CPU supports 5 MCE banks
- [ 0.024000] LVT offset 0 assigned for vector 0xf9
- [ 0.024000] process: using AMD E400 aware idle routine
- [ 0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
- [ 0.024000] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
- [ 0.024000] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
- [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.024000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
- [ 0.024000] Freeing SMP alternatives memory: 36K
- [ 0.032000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (family: 0xf, model: 0x6b, stepping: 0x2)
- [ 0.032000] Performance Events: AMD PMU driver.
- [ 0.032000] ... version: 0
- [ 0.032000] ... bit width: 48
- [ 0.032000] ... generic registers: 4
- [ 0.032000] ... value mask: 0000ffffffffffff
- [ 0.032000] ... max period: 00007fffffffffff
- [ 0.032000] ... fixed-purpose events: 0
- [ 0.032000] ... event mask: 000000000000000f
- [ 0.032000] Hierarchical SRCU implementation.
- [ 0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.032000] smp: Bringing up secondary CPUs ...
- [ 0.032000] CPU 1 irqstacks, hard=8bae8c10 soft=50b9d570
- [ 0.032000] x86: Booting SMP configuration:
- [ 0.032000] .... node #0, CPUs: #1
- [ 0.004000] Initializing CPU#1
- [ 0.108096] smp: Brought up 1 node, 2 CPUs
- [ 0.108096] smpboot: Max logical packages: 2
- [ 0.108096] smpboot: Total of 2 processors activated (10773.59 BogoMIPS)
- [ 0.108523] devtmpfs: initialized
- [ 0.108523] evm: security.selinux
- [ 0.108523] evm: security.SMACK64
- [ 0.108523] evm: security.SMACK64EXEC
- [ 0.108523] evm: security.SMACK64TRANSMUTE
- [ 0.108523] evm: security.SMACK64MMAP
- [ 0.108523] evm: security.apparmor
- [ 0.108523] evm: security.ima
- [ 0.108523] evm: security.capability
- [ 0.108523] PM: Registering ACPI NVS region [mem 0x37fae000-0x37feffff] (270336 bytes)
- [ 0.108523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.108523] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.108523] pinctrl core: initialized pinctrl subsystem
- [ 0.108523] RTC time: 16:40:46, date: 03/26/19
- [ 0.108523] NET: Registered protocol family 16
- [ 0.108523] audit: initializing netlink subsys (disabled)
- [ 0.108528] audit: type=2000 audit(1553618446.108:1): state=initialized audit_enabled=0 res=1
- [ 0.108528] EISA bus registered
- [ 0.108528] cpuidle: using governor ladder
- [ 0.108528] cpuidle: using governor menu
- [ 0.108528] node 0 link 0: io port [1000, ffffff]
- [ 0.108528] node 0 link 0: io port [2000, 2fff]
- [ 0.108528] TOM: 0000000040000000 aka 1024M
- [ 0.108528] node 0 link 0: mmio [e0000000, efffffff]
- [ 0.108528] node 0 link 0: mmio [a0000, bffff]
- [ 0.108528] node 0 link 0: mmio [40000000, fe0bffff]
- [ 0.108528] bus: [bus 00-07] on node 0 link 0
- [ 0.108528] bus: 00 [io 0x0000-0xffff]
- [ 0.108528] bus: 00 [mem 0x40000000-0xfcffffffff]
- [ 0.108528] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.108528] ACPI: bus type PCI registered
- [ 0.108528] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.108528] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.108528] PCI: not using MMCONFIG
- [ 0.112037] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
- [ 0.112095] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
- [ 0.112096] PCI: Using configuration type 1 for base access
- [ 0.112206] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.112207] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.112208] mtrr: corrected configuration.
- [ 0.113962] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.113962] ACPI: Added _OSI(Module Device)
- [ 0.113962] ACPI: Added _OSI(Processor Device)
- [ 0.113962] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.113962] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.113962] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.119062] ACPI: Interpreter enabled
- [ 0.119086] ACPI: (supports S0 S3 S4 S5)
- [ 0.119088] ACPI: Using IOAPIC for interrupt routing
- [ 0.119120] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.121192] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.121193] PCI: Using MMCONFIG for extended config space
- [ 0.121199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.122010] ACPI: Enabled 12 GPEs in block 00 to 1F
- [ 0.135557] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.135564] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.135820] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.136100] PCI host bridge to bus 0000:00
- [ 0.136103] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.136105] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.136107] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.136108] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
- [ 0.136110] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
- [ 0.136112] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
- [ 0.136114] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.136135] pci 0000:00:00.0: [10de:0547] type 00 class 0x050000
- [ 0.136367] pci 0000:00:01.0: [10de:0548] type 00 class 0x060100
- [ 0.136376] pci 0000:00:01.0: reg 0x10: [io 0x2f00-0x2fff]
- [ 0.136476] pci 0000:00:01.1: [10de:0542] type 00 class 0x0c0500
- [ 0.136487] pci 0000:00:01.1: reg 0x10: [io 0xec00-0xec3f]
- [ 0.136501] pci 0000:00:01.1: reg 0x20: [io 0x2d00-0x2d3f]
- [ 0.136505] pci 0000:00:01.1: reg 0x24: [io 0x2e00-0x2e3f]
- [ 0.136531] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.136616] pci 0000:00:02.0: [10de:055e] type 00 class 0x0c0310
- [ 0.136626] pci 0000:00:02.0: reg 0x10: [mem 0xfebff000-0xfebfffff]
- [ 0.136659] pci 0000:00:02.0: supports D1 D2
- [ 0.136660] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.136738] pci 0000:00:02.1: [10de:055f] type 00 class 0x0c0320
- [ 0.136749] pci 0000:00:02.1: reg 0x10: [mem 0xfebfec00-0xfebfecff]
- [ 0.136786] pci 0000:00:02.1: supports D1 D2
- [ 0.136788] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.136873] pci 0000:00:04.0: [10de:055e] type 00 class 0x0c0310
- [ 0.136883] pci 0000:00:04.0: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
- [ 0.136916] pci 0000:00:04.0: supports D1 D2
- [ 0.136918] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.136997] pci 0000:00:04.1: [10de:055f] type 00 class 0x0c0320
- [ 0.137007] pci 0000:00:04.1: reg 0x10: [mem 0xfebfe800-0xfebfe8ff]
- [ 0.137044] pci 0000:00:04.1: supports D1 D2
- [ 0.137046] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.137130] pci 0000:00:06.0: [10de:0560] type 00 class 0x01018a
- [ 0.137151] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
- [ 0.137161] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
- [ 0.137162] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
- [ 0.137164] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
- [ 0.137166] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
- [ 0.137255] pci 0000:00:07.0: [10de:055c] type 00 class 0x040300
- [ 0.137265] pci 0000:00:07.0: reg 0x10: [mem 0xfebf8000-0xfebfbfff]
- [ 0.137304] pci 0000:00:07.0: PME# supported from D3hot D3cold
- [ 0.137389] pci 0000:00:08.0: [10de:0561] type 01 class 0x060401
- [ 0.137492] pci 0000:00:09.0: [10de:0550] type 00 class 0x010185
- [ 0.137500] pci 0000:00:09.0: reg 0x10: [io 0xe480-0xe487]
- [ 0.137504] pci 0000:00:09.0: reg 0x14: [io 0xe400-0xe403]
- [ 0.137508] pci 0000:00:09.0: reg 0x18: [io 0xe080-0xe087]
- [ 0.137511] pci 0000:00:09.0: reg 0x1c: [io 0xe000-0xe003]
- [ 0.137515] pci 0000:00:09.0: reg 0x20: [io 0xdc00-0xdc0f]
- [ 0.137519] pci 0000:00:09.0: reg 0x24: [mem 0xfebf6000-0xfebf7fff]
- [ 0.137613] pci 0000:00:0a.0: [10de:054c] type 00 class 0x020000
- [ 0.137622] pci 0000:00:0a.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
- [ 0.137626] pci 0000:00:0a.0: reg 0x14: [io 0xd880-0xd887]
- [ 0.137630] pci 0000:00:0a.0: reg 0x18: [mem 0xfebfe400-0xfebfe4ff]
- [ 0.137634] pci 0000:00:0a.0: reg 0x1c: [mem 0xfebfe000-0xfebfe00f]
- [ 0.137661] pci 0000:00:0a.0: supports D1 D2
- [ 0.137663] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.137744] pci 0000:00:0b.0: [10de:0562] type 01 class 0x060400
- [ 0.137757] pci 0000:00:0b.0: enabling Extended Tags
- [ 0.137777] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.137860] pci 0000:00:0c.0: [10de:0563] type 01 class 0x060400
- [ 0.137871] pci 0000:00:0c.0: enabling Extended Tags
- [ 0.137889] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.137972] pci 0000:00:0d.0: [10de:0563] type 01 class 0x060400
- [ 0.137983] pci 0000:00:0d.0: enabling Extended Tags
- [ 0.138000] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.138082] pci 0000:00:0e.0: [10de:0563] type 01 class 0x060400
- [ 0.138093] pci 0000:00:0e.0: enabling Extended Tags
- [ 0.138111] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.138193] pci 0000:00:0f.0: [10de:0563] type 01 class 0x060400
- [ 0.138204] pci 0000:00:0f.0: enabling Extended Tags
- [ 0.138222] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.138305] pci 0000:00:10.0: [10de:0563] type 01 class 0x060400
- [ 0.138315] pci 0000:00:10.0: enabling Extended Tags
- [ 0.138333] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.138415] pci 0000:00:11.0: [10de:0563] type 01 class 0x060400
- [ 0.138425] pci 0000:00:11.0: enabling Extended Tags
- [ 0.138443] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.138533] pci 0000:00:12.0: [10de:053b] type 00 class 0x030000
- [ 0.138540] pci 0000:00:12.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
- [ 0.138545] pci 0000:00:12.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.138550] pci 0000:00:12.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
- [ 0.138556] pci 0000:00:12.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
- [ 0.138643] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
- [ 0.138719] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
- [ 0.138793] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
- [ 0.138870] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
- [ 0.139003] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
- [ 0.139008] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
- [ 0.139010] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.139011] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 0.139013] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
- [ 0.139015] pci 0000:00:08.0: bridge window [mem 0x40000000-0xdfffffff window] (subtractive decode)
- [ 0.139017] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
- [ 0.139045] pci 0000:00:0b.0: PCI bridge to [bus 02]
- [ 0.139079] pci 0000:00:0c.0: PCI bridge to [bus 03]
- [ 0.139107] pci 0000:00:0d.0: PCI bridge to [bus 04]
- [ 0.139136] pci 0000:00:0e.0: PCI bridge to [bus 05]
- [ 0.139168] pci 0000:00:0f.0: PCI bridge to [bus 06]
- [ 0.139197] pci 0000:00:10.0: PCI bridge to [bus 07]
- [ 0.139226] pci 0000:00:11.0: PCI bridge to [bus 08]
- [ 0.139242] pci_bus 0000:00: on NUMA node 0
- [ 0.141308] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
- [ 0.141424] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
- [ 0.141538] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
- [ 0.141652] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
- [ 0.141765] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
- [ 0.141879] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
- [ 0.141993] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
- [ 0.142106] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
- [ 0.142222] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
- [ 0.142338] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
- [ 0.142453] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
- [ 0.142572] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7
- [ 0.142687] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
- [ 0.142802] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
- [ 0.142915] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
- [ 0.143030] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
- [ 0.143156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
- [ 0.143272] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
- [ 0.143388] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *7
- [ 0.143885] SCSI subsystem initialized
- [ 0.143907] libata version 3.00 loaded.
- [ 0.144024] pci 0000:00:12.0: vgaarb: setting as boot VGA device
- [ 0.144026] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.144030] pci 0000:00:12.0: vgaarb: bridge control possible
- [ 0.144031] vgaarb: loaded
- [ 0.144065] ACPI: bus type USB registered
- [ 0.144090] usbcore: registered new interface driver usbfs
- [ 0.144100] usbcore: registered new interface driver hub
- [ 0.144115] usbcore: registered new device driver usb
- [ 0.144184] EDAC MC: Ver: 3.0.0
- [ 0.144184] PCI: Using ACPI for IRQ routing
- [ 0.144184] PCI: pci_cache_line_size set to 64 bytes
- [ 0.144184] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
- [ 0.144184] e820: reserve RAM buffer [mem 0x37fa0000-0x37ffffff]
- [ 0.144217] NetLabel: Initializing
- [ 0.144218] NetLabel: domain hash size = 128
- [ 0.144218] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.144237] NetLabel: unlabeled traffic allowed by default
- [ 0.144257] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.144257] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
- [ 0.144257] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
- [ 0.146133] clocksource: Switched to clocksource hpet
- [ 0.162562] VFS: Disk quotas dquot_6.6.0
- [ 0.162590] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.162753] AppArmor: AppArmor Filesystem Enabled
- [ 0.162798] pnp: PnP ACPI init
- [ 0.163393] pnp 00:00: [dma 0 disabled]
- [ 0.163486] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.163926] pnp 00:01: [dma 0 disabled]
- [ 0.164038] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.165588] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.165590] system 00:02: [io 0x0800-0x080f] has been reserved
- [ 0.165592] system 00:02: [io 0x2000-0x207f] has been reserved
- [ 0.165594] system 00:02: [io 0x2080-0x20ff] has been reserved
- [ 0.165596] system 00:02: [io 0x2400-0x247f] has been reserved
- [ 0.165598] system 00:02: [io 0x2480-0x24ff] has been reserved
- [ 0.165600] system 00:02: [io 0x2800-0x287f] has been reserved
- [ 0.165602] system 00:02: [io 0x2880-0x28ff] has been reserved
- [ 0.165604] system 00:02: [io 0x2c00-0x2c7f] has been reserved
- [ 0.165606] system 00:02: [io 0x2c80-0x2cff] has been reserved
- [ 0.165609] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
- [ 0.165612] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
- [ 0.165614] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
- [ 0.165616] system 00:02: [mem 0xfec80000-0x1fd93ffff] could not be reserved
- [ 0.165619] system 00:02: [mem 0xfefe0000-0xfefe01ff] has been reserved
- [ 0.165621] system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
- [ 0.165623] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
- [ 0.165631] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.165713] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.165794] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.165796] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.165802] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.166039] system 00:05: [io 0x0a00-0x0a0f] has been reserved
- [ 0.166042] system 00:05: [io 0x0a10-0x0a1f] has been reserved
- [ 0.166043] system 00:05: [io 0x0a20-0x0a2f] has been reserved
- [ 0.166045] system 00:05: [io 0x0a30-0x0a3f] has been reserved
- [ 0.166051] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.166135] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.166141] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.166328] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.166331] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.166333] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.166335] system 00:07: [mem 0x00100000-0x3fffffff] could not be reserved
- [ 0.166337] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
- [ 0.166343] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.166673] pnp: PnP ACPI: found 8 devices
- [ 0.166675] PnPBIOS: Disabled
- [ 0.204051] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.204086] pci 0000:00:08.0: PCI bridge to [bus 01]
- [ 0.204092] pci 0000:00:0b.0: PCI bridge to [bus 02]
- [ 0.204096] pci 0000:00:0c.0: PCI bridge to [bus 03]
- [ 0.204101] pci 0000:00:0d.0: PCI bridge to [bus 04]
- [ 0.204105] pci 0000:00:0e.0: PCI bridge to [bus 05]
- [ 0.204109] pci 0000:00:0f.0: PCI bridge to [bus 06]
- [ 0.204113] pci 0000:00:10.0: PCI bridge to [bus 07]
- [ 0.204117] pci 0000:00:11.0: PCI bridge to [bus 08]
- [ 0.204123] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.204125] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.204126] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.204128] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
- [ 0.204130] pci_bus 0000:00: resource 8 [mem 0x40000000-0xdfffffff window]
- [ 0.204132] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
- [ 0.204134] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.204136] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
- [ 0.204138] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.204139] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
- [ 0.204141] pci_bus 0000:01: resource 8 [mem 0x40000000-0xdfffffff window]
- [ 0.204143] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff window]
- [ 0.204234] NET: Registered protocol family 2
- [ 0.204429] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.204457] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.204505] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.204570] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.204581] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.204642] NET: Registered protocol family 1
- [ 0.205078] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
- [ 0.300439] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
- [ 0.300836] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
- [ 0.380396] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
- [ 0.380564] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380608] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380660] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380710] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380763] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380818] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380875] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380935] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.380997] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.381061] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.381069] pci 0000:00:12.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.381078] PCI: CLS 64 bytes, default 64
- [ 0.381152] Unpacking initramfs...
- [ 1.457042] Freeing initrd memory: 52828K
- [ 1.457224] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d2e1c2f6b, max_idle_ns: 440795295247 ns
- [ 1.457273] Scanning for low memory corruption every 60 seconds
- [ 1.457985] Initialise system trusted keyrings
- [ 1.457998] Key type blacklist registered
- [ 1.458084] workingset: timestamp_bits=14 max_order=18 bucket_order=4
- [ 1.459865] zbud: loaded
- [ 1.460305] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.460597] fuse init (API version 7.26)
- [ 1.462857] Key type asymmetric registered
- [ 1.462858] Asymmetric key parser 'x509' registered
- [ 1.462875] bounce: pool size: 64 pages
- [ 1.462893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 1.462941] io scheduler noop registered
- [ 1.462942] io scheduler deadline registered
- [ 1.463005] io scheduler cfq registered (default)
- [ 1.463818] pcieport 0000:00:0b.0: Signaling PME with IRQ 24
- [ 1.463837] pcieport 0000:00:0c.0: Signaling PME with IRQ 25
- [ 1.463856] pcieport 0000:00:0d.0: Signaling PME with IRQ 26
- [ 1.463874] pcieport 0000:00:0e.0: Signaling PME with IRQ 27
- [ 1.463894] pcieport 0000:00:0f.0: Signaling PME with IRQ 28
- [ 1.463912] pcieport 0000:00:10.0: Signaling PME with IRQ 29
- [ 1.463930] pcieport 0000:00:11.0: Signaling PME with IRQ 30
- [ 1.464072] vesafb: mode is 640x480x32, linelength=2560, pages=0
- [ 1.464073] vesafb: scrolling: redraw
- [ 1.464075] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 1.464101] vesafb: framebuffer at 0xd0000000, mapped to 0x460c538a, using 1216k, total 1216k
- [ 1.464242] Console: switching to colour frame buffer device 80x30
- [ 1.464256] fb0: VESA VGA frame buffer device
- [ 1.464392] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 1.464436] ACPI: Power Button [PWRB]
- [ 1.464494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 1.464517] ACPI: Power Button [PWRF]
- [ 1.464988] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- [ 1.465052] thermal LNXTHERM:00: registered as thermal_zone0
- [ 1.465053] ACPI: Thermal Zone [THRM] (30 C)
- [ 1.465190] isapnp: Scanning for PnP cards...
- [ 1.465306] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 1.485749] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 1.506248] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
- [ 1.508758] Linux agpgart interface v0.103
- [ 1.515941] loop: module loaded
- [ 1.516307] libphy: Fixed MDIO Bus: probed
- [ 1.516308] tun: Universal TUN/TAP device driver, 1.6
- [ 1.516359] PPP generic driver version 2.4.2
- [ 1.516412] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.516415] ehci-pci: EHCI PCI platform driver
- [ 1.516666] ehci-pci 0000:00:02.1: EHCI Host Controller
- [ 1.516673] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 1.516683] ehci-pci 0000:00:02.1: debug port 1
- [ 1.516716] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
- [ 1.516742] ehci-pci 0000:00:02.1: irq 22, io mem 0xfebfec00
- [ 1.532017] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 1.532092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.532094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.532096] usb usb1: Product: EHCI Host Controller
- [ 1.532097] usb usb1: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
- [ 1.532099] usb usb1: SerialNumber: 0000:00:02.1
- [ 1.532241] hub 1-0:1.0: USB hub found
- [ 1.532256] hub 1-0:1.0: 6 ports detected
- [ 1.532603] ehci-pci 0000:00:04.1: EHCI Host Controller
- [ 1.532608] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
- [ 1.532617] ehci-pci 0000:00:04.1: debug port 1
- [ 1.532644] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
- [ 1.532667] ehci-pci 0000:00:04.1: irq 20, io mem 0xfebfe800
- [ 1.548016] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
- [ 1.548056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.548058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.548059] usb usb2: Product: EHCI Host Controller
- [ 1.548061] usb usb2: Manufacturer: Linux 4.15.0-20-generic ehci_hcd
- [ 1.548063] usb usb2: SerialNumber: 0000:00:04.1
- [ 1.548163] hub 2-0:1.0: USB hub found
- [ 1.548169] hub 2-0:1.0: 6 ports detected
- [ 1.548346] ehci-platform: EHCI generic platform driver
- [ 1.548369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.548372] ohci-pci: OHCI PCI platform driver
- [ 1.548517] ohci-pci 0000:00:02.0: OHCI PCI host controller
- [ 1.548522] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
- [ 1.548552] ohci-pci 0000:00:02.0: irq 23, io mem 0xfebff000
- [ 1.610047] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.610049] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.610050] usb usb3: Product: OHCI PCI host controller
- [ 1.610052] usb usb3: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
- [ 1.610053] usb usb3: SerialNumber: 0000:00:02.0
- [ 1.610156] hub 3-0:1.0: USB hub found
- [ 1.610164] hub 3-0:1.0: 6 ports detected
- [ 1.610442] ohci-pci 0000:00:04.0: OHCI PCI host controller
- [ 1.610446] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
- [ 1.610476] ohci-pci 0000:00:04.0: irq 21, io mem 0xfebfd000
- [ 1.670044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.670046] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.670048] usb usb4: Product: OHCI PCI host controller
- [ 1.670049] usb usb4: Manufacturer: Linux 4.15.0-20-generic ohci_hcd
- [ 1.670051] usb usb4: SerialNumber: 0000:00:04.0
- [ 1.670154] hub 4-0:1.0: USB hub found
- [ 1.670161] hub 4-0:1.0: 6 ports detected
- [ 1.670333] ohci-platform: OHCI generic platform driver
- [ 1.670349] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.670424] i8042: PNP: No PS/2 controller found.
- [ 1.670424] i8042: Probing ports directly.
- [ 1.670866] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.670871] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.671005] mousedev: PS/2 mouse device common for all mice
- [ 1.671147] rtc_cmos 00:03: RTC can wake from S4
- [ 1.671296] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 1.671336] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
- [ 1.671347] i2c /dev entries driver
- [ 1.671444] device-mapper: uevent: version 1.0.3
- [ 1.671516] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
- [ 1.671543] platform eisa.0: Probing EISA bus 0
- [ 1.671546] platform eisa.0: EISA: Cannot allocate resource for mainboard
- [ 1.671548] platform eisa.0: Cannot allocate resource for EISA slot 1
- [ 1.671550] platform eisa.0: Cannot allocate resource for EISA slot 2
- [ 1.671552] platform eisa.0: Cannot allocate resource for EISA slot 3
- [ 1.671554] platform eisa.0: Cannot allocate resource for EISA slot 4
- [ 1.671556] platform eisa.0: Cannot allocate resource for EISA slot 5
- [ 1.671558] platform eisa.0: Cannot allocate resource for EISA slot 6
- [ 1.671560] platform eisa.0: Cannot allocate resource for EISA slot 7
- [ 1.671562] platform eisa.0: Cannot allocate resource for EISA slot 8
- [ 1.671564] platform eisa.0: EISA: Detected 0 cards
- [ 1.671571] cpufreq_nforce2: No nForce2 chipset
- [ 1.731299] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.731577] NET: Registered protocol family 10
- [ 1.736937] Segment Routing with IPv6
- [ 1.736971] NET: Registered protocol family 17
- [ 1.737029] Key type dns_resolver registered
- [ 1.774694] isapnp: No Plug & Play device found
- [ 1.774931] Using IPI No-Shortcut mode
- [ 1.775121] registered taskstats version 1
- [ 1.775134] Loading compiled-in X.509 certificates
- [ 1.781203] Loaded X.509 cert 'Build time autogenerated kernel key: 573dc39532f0c19c40a93e72c7ccf5ca0668369a'
- [ 1.781229] zswap: loaded using pool lzo/zbud
- [ 1.786285] Key type big_key registered
- [ 1.786293] Key type trusted registered
- [ 1.788876] Key type encrypted registered
- [ 1.788882] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.788888] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
- [ 1.788919] evm: HMAC attrs: 0x1
- [ 1.789189] Magic number: 11:764:692
- [ 1.789355] rtc_cmos 00:03: setting system clock to 2019-03-26 16:40:48 UTC (1553618448)
- [ 1.789596] powernow_k8: fid 0x13 (2700 MHz), vid 0x9
- [ 1.789597] powernow_k8: fid 0x12 (2600 MHz), vid 0xa
- [ 1.789598] powernow_k8: fid 0x10 (2400 MHz), vid 0xc
- [ 1.789599] powernow_k8: fid 0xe (2200 MHz), vid 0xe
- [ 1.789600] powernow_k8: fid 0xc (2000 MHz), vid 0x10
- [ 1.789601] powernow_k8: fid 0xa (1800 MHz), vid 0x10
- [ 1.789601] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
- [ 1.789631] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
- [ 1.789639] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.789640] EDD information not available.
- [ 1.791668] Freeing unused kernel memory: 1088K
- [ 1.791721] Write protecting the kernel text: 8796k
- [ 1.791806] Write protecting the kernel read-only data: 3472k
- [ 1.791807] NX-protecting the kernel data: 5540k
- [ 1.791913] ------------[ cut here ]------------
- [ 1.791919] x86/mm: Found insecure W+X mapping at address 07380a7e/0xc00a0000
- [ 1.791932] WARNING: CPU: 1 PID: 1 at /build/linux-vfP2Zg/linux-4.15.0/arch/x86/mm/dump_pagetables.c:266 note_page+0x670/0x860
- [ 1.791933] Modules linked in:
- [ 1.791938] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-20-generic #21-Ubuntu
- [ 1.791943] Hardware name: K-Systems GeForce7050M-M/GeForce7050M-M, BIOS 080014 03/11/2008
- [ 1.791946] EIP: note_page+0x670/0x860
- [ 1.791947] EFLAGS: 00010282 CPU: 1
- [ 1.791948] EAX: 00000041 EBX: f6a0df44 ECX: 00000278 EDX: 00000000
- [ 1.791950] ESI: 80000000 EDI: 00000000 EBP: f6a0df10 ESP: f6a0dee4
- [ 1.791951] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
- [ 1.791952] CR0: 80050033 CR2: b7da9cc2 CR3: 17e09000 CR4: 000006f0
- [ 1.791954] Call Trace:
- [ 1.791962] ptdump_walk_pgd_level_core+0x2ac/0x2e0
- [ 1.791966] ptdump_walk_pgd_level_checkwx+0x18/0x20
- [ 1.791970] mark_rodata_ro+0xf5/0x117
- [ 1.791974] ? rest_init+0xa0/0xa0
- [ 1.791976] kernel_init+0x2e/0xf0
- [ 1.791980] ret_from_fork+0x2e/0x38
- [ 1.791982] Code: d7 e9 0c fb ff ff f7 c6 00 10 00 00 74 8c 68 2e f3 ad d7 e9 16 fe ff ff 52 52 68 dc f3 ad d7 c6 05 26 e4 ca d7 01 e8 e0 73 00 00 <0f> 0b 8b 53 0c 83 c4 0c e9 38 fa ff ff 50 6a 08 52 6a 08 68 de
- [ 1.792013] ---[ end trace f272b9cefd4ff68c ]---
- [ 1.792149] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
- [ 1.921194] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
- [ 1.921371] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
- [ 1.922821] pata_amd 0000:00:06.0: version 0.4.1
- [ 1.934615] scsi host0: pata_amd
- [ 1.948129] scsi host1: pata_amd
- [ 1.948227] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- [ 1.948229] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- [ 1.948479] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 1.948849] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
- [ 2.110532] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66
- [ 2.110541] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
- [ 2.110543] ata1.00: limited to UDMA/33 due to 40-wire cable
- [ 2.112019] usb 4-3: new low-speed USB device number 2 using ohci-pci
- [ 2.115145] ata1.00: configured for UDMA/33
- [ 2.116070] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5
- [ 2.147612] sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.147615] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.147807] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 2.148122] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 2.148225] ata2: port disabled--ignoring
- [ 2.180020] usb 3-2: new low-speed USB device number 2 using ohci-pci
- [ 2.341037] usb 4-3: New USB device found, idVendor=89e5, idProduct=101b
- [ 2.341039] usb 4-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.341041] usb 4-3: Product: USB OPTICAL MOUSE
- [ 2.353375] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.365478] usbcore: registered new interface driver usbhid
- [ 2.365480] usbhid: USB HID core driver
- [ 2.371206] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:89E5:101B.0001/input/input5
- [ 2.371355] hid-generic 0003:89E5:101B.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:04.0-3/input0
- [ 2.416064] usb 3-2: New USB device found, idVendor=045e, idProduct=0750
- [ 2.416068] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.416069] usb 3-2: Product: Wired Keyboard 600
- [ 2.416071] usb 3-2: Manufacturer: Microsoft
- [ 2.442489] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/0003:045E:0750.0002/input/input6
- [ 2.484592] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:1e:90:d0:a5:0b
- [ 2.484594] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
- [ 2.484662] ahci 0000:00:09.0: version 3.0
- [ 2.485032] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
- [ 2.485065] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
- [ 2.485130] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
- [ 2.485133] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio
- [ 2.486092] scsi host2: ahci
- [ 2.486229] scsi host3: ahci
- [ 2.487308] scsi host4: ahci
- [ 2.487395] forcedeth 0000:00:0a.0 enp0s10: renamed from eth0
- [ 2.487651] scsi host5: ahci
- [ 2.487747] ata3: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6100 irq 22
- [ 2.487749] ata4: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6180 irq 22
- [ 2.487751] ata5: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6200 irq 22
- [ 2.487753] ata6: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6280 irq 22
- [ 2.488370] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
- [ 2.488525] checking generic (d0000000 130000) vs hw (d0000000 10000000)
- [ 2.488526] fb: switching to nouveaufb from VESA VGA
- [ 2.488558] Console: switching to colour dummy device 80x25
- [ 2.488814] nouveau 0000:00:12.0: NVIDIA C67 (067000a1)
- [ 2.498206] nouveau 0000:00:12.0: bios: version 05.67.32.25.19
- [ 2.499433] nouveau 0000:00:12.0: fb: 128 MiB of unknown memory type
- [ 2.500305] microsoft 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:02.0-2/input0
- [ 2.501115] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/0003:045E:0750.0003/input/input7
- [ 2.560141] microsoft 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:02.0-2/input1
- [ 2.628021] usb 1-3: new high-speed USB device number 3 using ehci-pci
- [ 2.784642] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
- [ 2.784645] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.784647] usb 1-3: Product: USB 2.0 Hub
- [ 2.784921] hub 1-3:1.0: USB hub found
- [ 2.785011] hub 1-3:1.0: 4 ports detected
- [ 2.810377] ata4: SATA link down (SStatus 0 SControl 300)
- [ 2.810406] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.810423] ata6: SATA link down (SStatus 0 SControl 300)
- [ 2.810442] ata5: SATA link down (SStatus 0 SControl 300)
- [ 2.811321] ata3.00: ATA-9: WDC WD10EZEX-60M2NA0, 01.01A01, max UDMA/100
- [ 2.811323] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 2.812327] ata3.00: configured for UDMA/100
- [ 2.816191] scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-60M 1A01 PQ: 0 ANSI: 5
- [ 2.816459] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 2.816590] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 2.816593] sd 2:0:0:0: [sda] 4096-byte physical blocks
- [ 2.816607] sd 2:0:0:0: [sda] Write Protect is off
- [ 2.816609] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.816634] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.901165] sda: sda1 sda2 < sda5 sda6 >
- [ 2.901652] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 2.912028] usb 1-4: new high-speed USB device number 4 using ehci-pci
- [ 3.070389] usb 1-4: New USB device found, idVendor=058f, idProduct=6362
- [ 3.070391] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.070393] usb 1-4: Product: Mass Storage Device
- [ 3.070395] usb 1-4: Manufacturer: Generic
- [ 3.070396] usb 1-4: SerialNumber: 058F312D81B
- [ 3.168020] usb 1-3.2: new high-speed USB device number 5 using ehci-pci
- [ 3.221610] usb-storage 1-4:1.0: USB Mass Storage device detected
- [ 3.221758] scsi host6: usb-storage 1-4:1.0
- [ 3.222337] usbcore: registered new interface driver usb-storage
- [ 3.227262] usbcore: registered new interface driver uas
- [ 3.286645] usb 1-3.2: New USB device found, idVendor=148f, idProduct=760b
- [ 3.286648] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.286650] usb 1-3.2: Product: 802.11 n WLAN
- [ 3.286652] usb 1-3.2: Manufacturer: MediaTek
- [ 3.286653] usb 1-3.2: SerialNumber: 1.0
- [ 3.800069] [TTM] Zone kernel: Available graphics memory: 441224 kiB
- [ 3.800070] [TTM] Zone highmem: Available graphics memory: 445132 kiB
- [ 3.800071] [TTM] Initializing pool allocator
- [ 3.800076] [TTM] Initializing DMA pool allocator
- [ 3.800098] nouveau 0000:00:12.0: DRM: VRAM: 125 MiB
- [ 3.800100] nouveau 0000:00:12.0: DRM: GART: 512 MiB
- [ 3.800104] nouveau 0000:00:12.0: DRM: TMDS table version 1.1
- [ 3.800106] nouveau 0000:00:12.0: DRM: TMDS table script pointers not stubbed
- [ 3.800107] nouveau 0000:00:12.0: DRM: DCB version 3.0
- [ 3.800110] nouveau 0000:00:12.0: DRM: DCB outp 00: 02000310 00000023
- [ 3.800113] nouveau 0000:00:12.0: DRM: DCB outp 01: 04031322 00000080
- [ 3.800115] nouveau 0000:00:12.0: DRM: DCB conn 00: 0000
- [ 3.800117] nouveau 0000:00:12.0: DRM: DCB conn 01: 1161
- [ 3.801551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 3.801553] [drm] Driver supports precise vblank timestamp query.
- [ 3.803718] nouveau 0000:00:12.0: DRM: MM: using M2MF for buffer copies
- [ 3.896230] nouveau 0000:00:12.0: DRM: allocated 1680x1050 fb: 0x9000, bo 05048cc9
- [ 3.900190] fbcon: nouveaufb (fb0) is primary device
- [ 3.900581] Console: switching to colour frame buffer device 210x65
- [ 3.900626] nouveau 0000:00:12.0: fb0: nouveaufb frame buffer device
- [ 3.948041] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:12.0 on minor 0
- [ 4.226051] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
- [ 4.226660] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
- [ 4.227279] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
- [ 4.227779] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
- [ 4.228140] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 4.228343] sd 6:0:0:1: Attached scsi generic sg3 type 0
- [ 4.228511] sd 6:0:0:2: Attached scsi generic sg4 type 0
- [ 4.228676] sd 6:0:0:3: Attached scsi generic sg5 type 0
- [ 4.249033] sd 6:0:0:2: [sdd] Attached SCSI removable disk
- [ 4.249779] sd 6:0:0:3: [sde] Attached SCSI removable disk
- [ 4.250405] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- [ 4.258158] sd 6:0:0:1: [sdc] Attached SCSI removable disk
- [ 14.318143] usb 1-3.2: USB disconnect, device number 5
- [ 14.560023] usb 1-3.2: new high-speed USB device number 6 using ehci-pci
- [ 14.678638] usb 1-3.2: New USB device found, idVendor=148f, idProduct=760b
- [ 14.678641] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 14.678642] usb 1-3.2: Product: 802.11 n WLAN
- [ 14.678644] usb 1-3.2: Manufacturer: MediaTek
- [ 14.678645] usb 1-3.2: SerialNumber: 1.0
- [ 35.836033] ata3.00: exception Emask 0x0 SAct 0xe000000 SErr 0x0 action 0x6 frozen
- [ 35.836042] ata3.00: failed command: READ FPDMA QUEUED
- [ 35.836048] ata3.00: cmd 60/08:c8:64:17:9f/00:00:24:00:00/40 tag 25 ncq dma 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 35.836051] ata3.00: status: { DRDY }
- [ 35.836054] ata3.00: failed command: READ FPDMA QUEUED
- [ 35.836059] ata3.00: cmd 60/02:d0:62:17:9f/00:00:24:00:00/40 tag 26 ncq dma 1024 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 35.836062] ata3.00: status: { DRDY }
- [ 35.836064] ata3.00: failed command: READ FPDMA QUEUED
- [ 35.836070] ata3.00: cmd 60/08:d8:3f:16:9f/00:00:24:00:00/40 tag 27 ncq dma 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 35.836073] ata3.00: status: { DRDY }
- [ 35.836078] ata3: hard resetting link
- [ 36.150285] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 36.152145] ata3.00: configured for UDMA/100
- [ 36.152150] ata3.00: device reported invalid CHS sector 0
- [ 36.152151] ata3.00: device reported invalid CHS sector 0
- [ 36.152153] ata3.00: device reported invalid CHS sector 0
- [ 36.152158] ata3: EH complete
- [ 68.604036] ata3.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x6 frozen
- [ 68.604045] ata3.00: failed command: READ FPDMA QUEUED
- [ 68.604051] ata3.00: cmd 60/08:28:64:1f:9f/00:00:24:00:00/40 tag 5 ncq dma 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 68.604055] ata3.00: status: { DRDY }
- [ 68.604060] ata3: hard resetting link
- [ 68.918285] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 68.920113] ata3.00: configured for UDMA/100
- [ 68.920118] ata3.00: device reported invalid CHS sector 0
- [ 68.920124] ata3: EH complete
- [ 69.452022] raid6: mmxx1 gen() 2193 MB/s
- [ 69.500021] raid6: mmxx2 gen() 3759 MB/s
- [ 69.548038] raid6: sse1x1 gen() 2147 MB/s
- [ 69.596017] raid6: sse1x2 gen() 3410 MB/s
- [ 69.644022] raid6: sse2x1 gen() 3567 MB/s
- [ 69.692011] raid6: sse2x1 xor() 2900 MB/s
- [ 69.740014] raid6: sse2x2 gen() 4228 MB/s
- [ 69.788017] raid6: sse2x2 xor() 3129 MB/s
- [ 69.788019] raid6: using algorithm sse2x2 gen() 4228 MB/s
- [ 69.788020] raid6: .... xor() 3129 MB/s, rmw enabled
- [ 69.788021] raid6: using intx1 recovery algorithm
- [ 69.800661] xor: measuring software checksum speed
- [ 69.840010] pIII_sse : 7658.000 MB/sec
- [ 69.880010] prefetch64-sse: 7706.000 MB/sec
- [ 69.880011] xor: using function: prefetch64-sse (7706.000 MB/sec)
- [ 69.933659] Btrfs loaded, crc32c=crc32c-generic
- [ 69.996318] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 69.996323] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
- [ 69.996326] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Logical block address out of range
- [ 69.996330] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
- [ 69.996332] print_req_error: I/O error, dev sr0, sector 0
- [ 70.024313] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 70.024315] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
- [ 70.024318] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Logical block address out of range
- [ 70.024320] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
- [ 70.024322] print_req_error: I/O error, dev sr0, sector 0
- [ 70.024326] Buffer I/O error on dev sr0, logical block 0, async page read
- [ 101.372026] ata3.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x6 frozen
- [ 101.372035] ata3.00: failed command: READ FPDMA QUEUED
- [ 101.372042] ata3.00: cmd 60/08:20:64:17:9f/00:00:24:00:00/40 tag 4 ncq dma 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 101.372045] ata3.00: status: { DRDY }
- [ 101.372050] ata3: hard resetting link
- [ 101.686294] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 101.688129] ata3.00: configured for UDMA/100
- [ 101.688133] ata3.00: device reported invalid CHS sector 0
- [ 101.688138] ata3: EH complete
- [ 102.055826] random: crng init done
- [ 102.173374] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 103.197038] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 103.230889] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
- [ 103.231047] systemd[1]: Detected architecture x86.
- [ 103.241389] systemd[1]: Set hostname to <MalkinLab>.
- [ 104.158742] systemd[1]: Created slice User and Session Slice.
- [ 104.158853] systemd[1]: Reached target User and Group Name Lookups.
- [ 104.159165] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 104.159196] systemd[1]: Reached target Remote File Systems.
- [ 104.159273] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 104.159524] systemd[1]: Created slice System Slice.
- [ 104.159643] systemd[1]: Listening on udev Kernel Socket.
- [ 104.550445] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
- [ 104.768237] systemd-journald[335]: Received request to flush runtime journal from PID 1
- [ 105.962431] lp: driver loaded but no devices found
- [ 106.023567] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
- [ 106.248495] ppdev: user-space parallel port driver
- [ 111.067464] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 111.179016] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 111.179029] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- [ 111.527839] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
- [ 111.527861] snd_hda_intel 0000:00:07.0: Disabling MSI
- [ 111.618195] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 111.646125] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 111.674614] audit: type=1400 audit(1553618558.372:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=538 comm="apparmor_parser"
- [ 111.674621] audit: type=1400 audit(1553618558.372:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
- [ 111.674624] audit: type=1400 audit(1553618558.372:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=538 comm="apparmor_parser"
- [ 111.674627] audit: type=1400 audit(1553618558.372:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
- [ 111.678599] audit: type=1400 audit(1553618558.384:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=537 comm="apparmor_parser"
- [ 111.678608] audit: type=1400 audit(1553618558.384:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=537 comm="apparmor_parser"
- [ 111.681821] audit: type=1400 audit(1553618558.388:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=540 comm="apparmor_parser"
- [ 111.681827] audit: type=1400 audit(1553618558.388:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=540 comm="apparmor_parser"
- [ 111.681830] audit: type=1400 audit(1553618558.388:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=540 comm="apparmor_parser"
- [ 111.683451] audit: type=1400 audit(1553618558.388:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=541 comm="apparmor_parser"
- [ 111.740435] kvm: Nested Virtualization enabled
- [ 111.758107] MCE: In-kernel MCE decoding enabled.
- [ 111.762984] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 111.762986] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 111.880035] usb 1-3.2: reset high-speed USB device number 6 using ehci-pci
- [ 111.990896] mt7601u 1-3.2:1.0: ASIC revision: 76010001 MAC revision: 76010500
- [ 112.032276] mt7601u 1-3.2:1.0: Warning: unsupported EEPROM version 0d
- [ 112.032280] mt7601u 1-3.2:1.0: EEPROM ver:0d fae:00
- [ 112.271513] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 112.271898] usbcore: registered new interface driver mt7601u
- [ 112.275141] mt7601u 1-3.2:1.0 wlx00873632a302: renamed from wlan0
- [ 112.508027] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 112.508031] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 112.508033] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 112.508035] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 112.508036] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
- [ 112.508038] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 112.508040] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
- [ 112.508042] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
- [ 112.508044] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
- [ 114.737164] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
- [ 114.737258] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
- [ 114.737322] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
- [ 114.738415] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
- [ 114.738485] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
- [ 116.767516] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
- [ 116.768461] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
- [ 116.769420] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
- [ 116.769434] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s10: link becomes ready
- [ 116.777946] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 116.813188] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 117.089479] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 117.294304] NET: Registered protocol family 24
- [ 117.798475] ppp0: renamed from ppp1
- [ 167.592967] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 167.623901] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 167.655900] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 167.663052] usb 1-3.2: USB disconnect, device number 6
- [ 167.684210] mt7601u 1-3.2:1.0: Warning: TX DMA did not stop!
- [ 171.768045] mt7601u 1-3.2:1.0: Warning: MAC TX did not stop!
- [ 174.260041] mt7601u 1-3.2:1.0: Warning: MAC RX did not stop!
- [ 174.260046] mt7601u 1-3.2:1.0: Warning: RX DMA did not stop!
- [ 174.564039] usb 1-3.2: new high-speed USB device number 7 using ehci-pci
- [ 174.682530] usb 1-3.2: New USB device found, idVendor=148f, idProduct=760b
- [ 174.682539] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 174.682544] usb 1-3.2: Product: 802.11 n WLAN
- [ 174.682548] usb 1-3.2: Manufacturer: MediaTek
- [ 174.682552] usb 1-3.2: SerialNumber: 1.0
- [ 174.768065] usb 1-3.2: reset high-speed USB device number 7 using ehci-pci
- [ 174.878899] mt7601u 1-3.2:1.0: ASIC revision: 76010001 MAC revision: 76010500
- [ 174.921263] mt7601u 1-3.2:1.0: Warning: unsupported EEPROM version 0d
- [ 174.921265] mt7601u 1-3.2:1.0: EEPROM ver:0d fae:00
- [ 175.152542] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 175.301801] mt7601u 1-3.2:1.0 wlx00873632a302: renamed from wlan0
- [ 175.445453] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 175.480216] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 175.518278] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 176.837913] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 176.868910] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 176.879020] usb 1-3.2: USB disconnect, device number 7
- [ 176.896490] mt7601u 1-3.2:1.0: Warning: TX DMA did not stop!
- [ 180.904046] mt7601u 1-3.2:1.0: Warning: MAC TX did not stop!
- [ 183.304079] mt7601u 1-3.2:1.0: Warning: MAC RX did not stop!
- [ 183.304084] mt7601u 1-3.2:1.0: Warning: RX DMA did not stop!
- [ 183.604057] usb 1-3.2: new high-speed USB device number 8 using ehci-pci
- [ 183.722653] usb 1-3.2: New USB device found, idVendor=148f, idProduct=760b
- [ 183.722661] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 183.722666] usb 1-3.2: Product: 802.11 n WLAN
- [ 183.722670] usb 1-3.2: Manufacturer: MediaTek
- [ 183.722674] usb 1-3.2: SerialNumber: 1.0
- [ 183.808057] usb 1-3.2: reset high-speed USB device number 8 using ehci-pci
- [ 183.918901] mt7601u 1-3.2:1.0: ASIC revision: 76010001 MAC revision: 76010500
- [ 183.969774] mt7601u 1-3.2:1.0: Warning: unsupported EEPROM version 0d
- [ 183.969780] mt7601u 1-3.2:1.0: EEPROM ver:0d fae:00
- [ 184.202008] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
- [ 184.249315] mt7601u 1-3.2:1.0 wlx00873632a302: renamed from wlan0
- [ 184.278630] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 184.312797] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 184.360924] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 190.280436] kauditd_printk_skb: 10 callbacks suppressed
- [ 190.280439] audit: type=1400 audit(1553618636.988:22): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/anton/.cache/mesa_shader_cache/index" pid=2091 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
- [ 210.893611] audit: type=1400 audit(1553618657.600:23): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/anton/.mozilla/firefox/667zjlk6.default/cert8.db" pid=2090 comm="soffice.bin" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
- [ 210.894137] audit: type=1400 audit(1553618657.600:24): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/anton/.mozilla/firefox/667zjlk6.default/key3.db" pid=2090 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
- [ 698.087436] chrome[2221]: segfault at 0 ip b3aaa2cc sp bfe817e4 error 4 in nouveau_dri.so[b3599000+b9d000]
- [ 2031.661904] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 2031.692901] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 2031.721897] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 2031.753899] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 2031.785904] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 2031.817899] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 2031.849897] mt7601u 1-3.2:1.0: Error: RX urb failed:-71
- [ 2031.855028] usb 1-3.2: USB disconnect, device number 8
- [ 2031.884474] mt7601u 1-3.2:1.0: Warning: TX DMA did not stop!
- [ 2035.884036] mt7601u 1-3.2:1.0: Warning: MAC TX did not stop!
- [ 2038.284039] mt7601u 1-3.2:1.0: Warning: MAC RX did not stop!
- [ 2038.284046] mt7601u 1-3.2:1.0: Warning: RX DMA did not stop!
- [ 2061.804042] usb 1-3.2: new high-speed USB device number 9 using ehci-pci
- [ 2061.923289] usb 1-3.2: New USB device found, idVendor=148f, idProduct=760b
- [ 2061.923297] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2061.923302] usb 1-3.2: Product: 802.11 n WLAN
- [ 2061.923306] usb 1-3.2: Manufacturer: MediaTek
- [ 2061.923311] usb 1-3.2: SerialNumber: 1.0
- [ 2062.012049] usb 1-3.2: reset high-speed USB device number 9 using ehci-pci
- [ 2062.123654] mt7601u 1-3.2:1.0: ASIC revision: 76010001 MAC revision: 76010500
- [ 2062.164890] mt7601u 1-3.2:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
- [ 2062.552150] mt7601u 1-3.2:1.0: Warning: unsupported EEPROM version 0d
- [ 2062.552157] mt7601u 1-3.2:1.0: EEPROM ver:0d fae:00
- [ 2062.797109] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
- [ 2063.365168] mt7601u 1-3.2:1.0 wlx00873632a302: renamed from wlan0
- [ 2063.632771] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 2063.668242] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 2063.853218] IPv6: ADDRCONF(NETDEV_UP): wlx00873632a302: link is not ready
- [ 2871.291130] perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
- [ 3497.863203] chrome[3282]: segfault at 0 ip b3a932cc sp bf864b94 error 4 in nouveau_dri.so[b3582000+b9d000]
- [ 3578.295950] perf: interrupt took too long (3185 > 3162), lowering kernel.perf_event_max_sample_rate to 62750
- [ 4109.466016] perf: interrupt took too long (4014 > 3981), lowering kernel.perf_event_max_sample_rate to 49750
- [ 6675.375861] perf: interrupt took too long (5021 > 5017), lowering kernel.perf_event_max_sample_rate to 39750
- [ 6794.104424] chrome[5220]: segfault at 0 ip b3ab62cc sp bfdaa0d4 error 4 in nouveau_dri.so[b35a5000+b9d000]
- [ 9159.367402] chrome[8425]: segfault at 0 ip b3ab52cc sp bf922784 error 4 in nouveau_dri.so[b35a4000+b9d000]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement