BBAI v5.4x boot log - 8/5/20

OPTIONS: I18n
Compiled on Feb 10 2020, 00:00:00.
Port /dev/ttyUSB0, 19:48:03

Press CTRL-A Z for help on special keys

[  859.396994] watchdog: watchdog0: watchdog did not stop!
[  859.975283] reboot: Restarting system


U-Boot 2019.07-rc4-00001-g607b5b738b (Jul 06 2019 - 21:01:15 -0500), Build: jenkins-github_Bootloader-Builder-127

CPU  : DRA752-GP ES2.0
Model: BeagleBoard.org BeagleBone AI
Board: BeagleBone AI REV A
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
CTRL_CORE_PAD_I2C1_SDA:    0x00060000
CTRL_CORE_PAD_I2C1_SCL:    0x00060000
CTRL_CORE_PAD_GPMC_A0:     0x00060007
CTRL_CORE_PAD_GPMC_A1:     0x00060007
CTRL_CORE_PAD_VIN2A_D4:    0x0005000f
CTRL_CORE_PAD_VIN2A_D5:    0x0005000f
CM_L4PER_GPIO7_CLKCTRL:    0x00000001
CM_L4PER_I2C1_CLKCTRL:     0x00000002
CM_L4PER_I2C4_CLKCTRL:     0x00000002
CM_L4PER_L4_PER1_CLKCTRL   0x00000001
PM_L4PER_I2C1_WKDEP        0x0000b000
RM_L4PER_I2C1_CONTEXT      0x00000002
PM_L4PER_I2C4_WKDEP        0x0000b000
RM_L4PER_I2C4_CONTEXT      0x00000001
BeagleBone: cape eeprom: i2c_probe: 0x54
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x55
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x56
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x57
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
Net:
Warning: ethernet@48484000 using MAC address from ROM
eth0: ethernet@48484000
Press SPACE to abort autoboot in 1 seconds
usb_boot is currently disabled
scsi_boot is currently disabled
switch to partitions #0, OK
mmc0 is current device

Partition Map for MMC device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     8192            7364608         22d92ca5-01     83 Boot
Scanning mmc device 0
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
569 bytes read in 2 ms (277.3 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt ...
debug: [uname_r=5.4.52-ti-r15] ...
loading /boot/vmlinuz-5.4.52-ti-r15 ...
10002944 bytes read in 860 ms (11.1 MiB/s)
loading /boot/dtbs/5.4.52-ti-r15/am5729-beagleboneai.dtb ...
201975 bytes read in 20 ms (9.6 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: unable to find [mmc 0:1 BB-SPIDEV1-00A0.dtbo]...
loading /boot/initrd.img-5.4.52-ti-r15 ...
6403231 bytes read in 550 ms (11.1 MiB/s)
debug: [console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=1.
debug: [bootz 0x82000000 0x88080000:61b49f 0x88000000] ...
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8f9e4000, end 8ffff49f ... OK
   Loading Device Tree to 8f9af000, end 8f9e34f6 ... OK
ft_fixup_clocks failed for DSP voltage domain: FDT_ERR_NOTFOUND

Starting kernel ...

[    0.003406] /cpus/cpu@0 missing clock-frequency property
[    0.003435] /cpus/cpu@1 missing clock-frequency property
[    0.251821] wkupaon-clkctrl:0068:0: failed to disable
[    1.420773] sdhci-omap 4809c000.mmc: failed to set system capabilities
[    1.428139] sdhci-omap 480b4000.mmc: failed to set system capabilities
[    1.516253] dwc3 488d0000.usb: Failed to get clk 'ref': -2
[    1.607516] omap_voltage_late_init: Voltage driver support not added
[    1.747324] sdhci-omap 4809c000.mmc: no pinctrl state for sdr104 mode
[    1.753834] sdhci-omap 4809c000.mmc: no pinctrl state for ddr50 mode
[    1.760276] sdhci-omap 4809c000.mmc: no pinctrl state for sdr50 mode
[    1.766689] sdhci-omap 4809c000.mmc: no pinctrl state for sdr25 mode
[    1.773125] sdhci-omap 4809c000.mmc: no pinctrl state for sdr12 mode
[    1.779529] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_1_8v mode
[    1.786192] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
[    1.792855] sdhci-omap 4809c000.mmc: no pinctrl state for hs mode
[    1.799007] sdhci-omap 4809c000.mmc: no pinctrl state for hs mode
[    1.805146] sdhci-omap 4809c000.mmc: no pinctrl state for hs200_1_8v mode
[    1.899036] dwc3 48890000.usb: Failed to get clk 'ref': -2
[    1.905716] OF: graph: no port node found in /ocp/interconnect@4a000000/segment@0/target-module@80000/ocp2scp@0/phy@4000
[    1.919397] dwc3 488d0000.usb: Failed to get clk 'ref': -2
[    1.937921] omapdss error: HDMI I2C Master Error
[    1.948452] mmc1: tuning execution failed: -22
[    1.952996] mmc1: error -22 whilst initialising MMC card
[    2.045664] mmc1: tuning execution failed: -22
[    2.050377] mmc1: error -22 whilst initialising MMC card
[    2.156620] mmc1: tuning execution failed: -22
[    2.161142] mmc1: error -22 whilst initialising MMC card
[    2.276967] mmc1: tuning execution failed: -22
[    2.281616] mmc1: error -22 whilst initialising MMC card
[    3.024131] omapdss error: HDMI I2C Master Error

Debian GNU/Linux 10 beaglebone ttyS0

BeagleBoard.org Debian Buster IoT Image 2020-07-28

Support: https://bbb.io/debian

default username:password is [debian:temppwd]

beaglebone login: