Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- --- TLP 1.0.901 --------------------------------------------
- +++ Configured Settings: /etc/default/tlp
- TLP_ENABLE=1
- TLP_DEFAULT_MODE=AC
- TLP_PERSISTENT_DEFAULT=0
- DISK_IDLE_SECS_ON_AC=0
- DISK_IDLE_SECS_ON_BAT=2
- MAX_LOST_WORK_SECS_ON_AC=15
- MAX_LOST_WORK_SECS_ON_BAT=60
- CPU_HWP_ON_AC=balance_performance
- CPU_HWP_ON_BAT=balance_power
- SCHED_POWERSAVE_ON_AC=0
- SCHED_POWERSAVE_ON_BAT=1
- NMI_WATCHDOG=0
- ENERGY_PERF_POLICY_ON_AC=performance
- ENERGY_PERF_POLICY_ON_BAT=power
- DISK_DEVICES="sda"
- DISK_APM_LEVEL_ON_AC="254 254"
- DISK_APM_LEVEL_ON_BAT="128 128"
- SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
- SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
- AHCI_RUNTIME_PM_TIMEOUT=15
- PCIE_ASPM_ON_AC=performance
- PCIE_ASPM_ON_BAT=powersave
- RADEON_POWER_PROFILE_ON_AC=high
- RADEON_POWER_PROFILE_ON_BAT=low
- RADEON_DPM_STATE_ON_AC=performance
- RADEON_DPM_STATE_ON_BAT=battery
- RADEON_DPM_PERF_LEVEL_ON_AC=auto
- RADEON_DPM_PERF_LEVEL_ON_BAT=auto
- WIFI_PWR_ON_AC=off
- WIFI_PWR_ON_BAT=on
- WOL_DISABLE=Y
- SOUND_POWER_SAVE_ON_AC=0
- SOUND_POWER_SAVE_ON_BAT=1
- SOUND_POWER_SAVE_CONTROLLER=Y
- BAY_POWEROFF_ON_AC=0
- BAY_POWEROFF_ON_BAT=0
- BAY_DEVICE="sr0"
- RUNTIME_PM_ON_AC=on
- RUNTIME_PM_ON_BAT=auto
- USB_AUTOSUSPEND=1
- USB_BLACKLIST_BTUSB=0
- USB_BLACKLIST_PHONE=0
- USB_BLACKLIST_PRINTER=1
- USB_BLACKLIST_WWAN=1
- RESTORE_DEVICE_STATE_ON_STARTUP=0
- DEVICES_TO_DISABLE_ON_STARTUP="wifi"
- +++ System Info
- System = IBM SERIAL# CBG nkPad X31
- BIOS = 1QET97WW (3.02 )
- Release = Debian GNU/Linux 9.3 (stretch)
- Kernel = 4.9.0-4-686-pae #1 SMP Debian 4.9.65-3+deb9u1 (2017-12-23) i686
- /proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686-pae root=UUID=9ade8379-ab79-4584-a652-76cfb02c62fb ro forcepae quiet
- Init system = systemd v232
- Boot mode = BIOS (CSM, Legacy)
- +++ TLP Status
- State = enabled
- Last run = 11:51:49, 51 sec(s) ago
- Mode = AC
- Power source = AC
- +++ Processor
- CPU model = Intel(R) Pentium(R) M processor 1400MHz
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = ondemand performance schedutil
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 600000 [kHz]
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 1400000 [kHz]
- /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 1400000 1200000 1000000 800000 600000 [kHz]
- /sys/devices/system/cpu/cpufreq/boost = (not available)
- x86_energy_perf_policy: program not installed.
- /sys/module/workqueue/parameters/power_efficient = N
- /proc/sys/kernel/nmi_watchdog = 0
- +++ Undervolting
- PHC kernel not available.
- +++ Temperatures
- /proc/acpi/ibm/thermal = 39 -128 43 39 32 -128 26 -128 [°C]
- Fan speed (fan1) = 0 [/min]
- +++ File System
- /proc/sys/vm/laptop_mode = 0
- /proc/sys/vm/dirty_writeback_centisecs = 1500
- /proc/sys/vm/dirty_expire_centisecs = 1500
- /proc/sys/vm/dirty_ratio = 20
- /proc/sys/vm/dirty_background_ratio = 10
- +++ Storage Devices
- /dev/sda:
- Model = SAMSUNG MP0402H
- Firmware = YQ200-05
- APM Level = 254
- Status = active/idle
- Scheduler = cfq
- Runtime PM: control = on, autosuspend_delay = -1
- SMART info:
- 4 Start_Stop_Count = 454
- 5 Reallocated_Sector_Ct = 0
- 12 Power_Cycle_Count = 221
- 191 G-Sense_Error_Rate = 770
- 194 Temperature_Celsius = 35 [°C]
- 225 Load_Cycle_Count = 8493
- +++ SATA Link Power Management
- No AHCI-enabled host controller detected.
- +++ AHCI Host Controller Runtime Power Management
- /sys/bus/pci/devices/0000:00:1f.1/ata1/power/control = on
- /sys/bus/pci/devices/0000:00:1f.1/ata2/power/control = on
- +++ Docks and Device Bays
- /sys/devices/platform/dock.0: battery_bay = no battery
- /sys/devices/platform/dock.1: ata_bay = no drive (or powered off)
- /sys/devices/platform/dock.2: dock_station = undocked
- +++ PCIe Active State Power Management
- /sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
- +++ Radeon Graphics
- /sys/class/drm/card0/device/power_method = profile
- /sys/class/drm/card0/device/power_profile = high
- +++ Wireless
- bluetooth = none (no device)
- wifi = on
- wwan = none (no device)
- wlp2s2(ipw2100) : wifi, not connected, power management = off
- +++ Audio
- /sys/module/snd_ac97_codec/parameters/power_save = 0
- +++ Runtime Power Management
- Device blacklist = (not configured)
- Driver blacklist = amdgpu nouveau nvidia radeon (default)
- /sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, agpgart-intel)
- /sys/bus/pci/devices/0000:00:01.0/power/control = on (0x060400, PCI bridge, no driver)
- /sys/bus/pci/devices/0000:00:1d.0/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1d.1/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1d.2/power/control = on (0x0c0300, USB controller, uhci_hcd)
- /sys/bus/pci/devices/0000:00:1d.7/power/control = on (0x0c0320, USB controller, ehci-pci)
- /sys/bus/pci/devices/0000:00:1e.0/power/control = on (0x060400, PCI bridge, no driver)
- /sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, lpc_ich)
- /sys/bus/pci/devices/0000:00:1f.1/power/control = on (0x01018a, IDE interface, ata_piix)
- /sys/bus/pci/devices/0000:00:1f.3/power/control = on (0x0c0500, SMBus, i801_smbus)
- /sys/bus/pci/devices/0000:00:1f.5/power/control = on (0x040100, Multimedia audio controller, snd_intel8x0)
- /sys/bus/pci/devices/0000:00:1f.6/power/control = on (0x070300, Modem, snd_intel8x0m)
- /sys/bus/pci/devices/0000:01:00.0/power/control = on (0x030000, VGA compatible controller, radeon)
- /sys/bus/pci/devices/0000:02:00.0/power/control = on (0x060700, CardBus bridge, yenta_cardbus)
- /sys/bus/pci/devices/0000:02:00.1/power/control = on (0x060700, CardBus bridge, yenta_cardbus)
- /sys/bus/pci/devices/0000:02:00.2/power/control = on (0x0c0010, FireWire (IEEE 1394), firewire_ohci)
- /sys/bus/pci/devices/0000:02:02.0/power/control = on (0x028000, Network controller, ipw2100)
- /sys/bus/pci/devices/0000:02:08.0/power/control = on (0x020000, Ethernet controller, e100)
- +++ USB
- Autosuspend = enabled
- Device whitelist = (not configured)
- Device blacklist = (not configured)
- Bluetooth blacklist = disabled
- Phone blacklist = disabled
- WWAN blacklist = enabled
- Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
- Bus 004 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- Bus 003 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- Bus 002 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
- +++ Battery Status
- /sys/class/power_supply/BAT0/manufacturer = SANYO
- /sys/class/power_supply/BAT0/model_name = IBM-08K8040
- /sys/class/power_supply/BAT0/cycle_count = (not supported)
- /sys/class/power_supply/BAT0/energy_full_design = 47520 [mWh]
- /sys/class/power_supply/BAT0/energy_full = 4910 [mWh]
- /sys/class/power_supply/BAT0/energy_now = 2540 [mWh]
- /sys/class/power_supply/BAT0/power_now = 12554 [mW]
- /sys/class/power_supply/BAT0/status = Charging
- Charge = 51.7 [%]
- Capacity = 10.3 [%]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement