API tools faq
paste
rayddteam

Untitled

rayddteam
Aug 30th, 2012
126
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.23 KB | None | 0 0
raw download clone embed print report
  1. initarm: console initialized
  2. arg1 kmdp = 0xc0466b40
  3. boothowto = 0x00000000
  4. dtbp = 0xc0426ad8
  5. kernel image addresses:
  6. kernbase = 0xc0000000
  7. _etext (sdata) = 0xc03a8634
  8. _edata = 0xc044aef8
  9. __bss_start = 0xc044aef8
  10. _end = 0xc0469e24
  11. loader passed (static) kenv:
  12. no env, null ptr
  13. processing avail regions:
  14. 90000000-b0000000 -> 90000000-90100000 = 100000
  15. 90561000-b0000000 -> 90561000-b0000000 = 1fa9f000
  16. fill in phys_avail:
  17. region: 0x90000000 - 0x90100000 (0x00100000)
  18. region: 0x90561000 - 0xb0000000 (0x1fa9f000)
  19. KDB: debugger backends: ddb
  20. KDB: current backend: ddb
  21. Copyright (c) 1992-2012 The FreeBSD Project.
  22. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  23. The Regents of the University of California. All rights reserved.
  24. FreeBSD is a registered trademark of The FreeBSD Foundation.
  25. FreeBSD 10.0-CURRENT #398 r0:239333M: Thu Aug 30 14:39:10 EEST 2012
  26. [email protected]:/usr/obj/arm.armv6/usr/1/MIPS_FreeBSD/HEAD/head/sys/EFIKA_MX_SMARTTOP arm
  27. Preloaded elf kernel "kernel" at 0xc0466b40.
  28. CPU: Cortex A8-r2 rev 5 (Cortex-A core)
  29. Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
  30. WB disabled EABT branch prediction enabled
  31. LoUU:2 LoC:2 LoUIS:1
  32. Cache level 1:
  33. 32KB/64B 4-way data cache WT WB Read-Alloc
  34. 32KB/64B 4-way instruction cache Read-Alloc
  35. Cache level 2:
  36. 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
  37. real memory = 536870912 (512 MB)
  38. Physical memory chunk(s):
  39. 0x90000000 - 0x900fffff, 1048576 bytes (256 pages)
  40. 0x90561000 - 0xaf629fff, 520916992 bytes (127177 pages)
  41. avail memory = 519696384 (495 MB)
  42. pmap_fault_fix: pmap:0xc0467eb0 va:ffff1000 ftype:3 user:1random device not loaded; using insecure entropy
  43. mem: <memory>
  44. null: <null device, zero device>
  45. openfirm: <Open Firmware control device>
  46. random: <entropy source, Software, Yarrow>
  47. fdtbus_identify(): fdtbus_identify(driver=0xc04286f0, parent=0xc2cea180)
  48. fdtbus_probe(): fdtbus_probe(dev=0xc2cb7980); pass=2147483647
  49. fdtbus_probe(): fdtbus_probe(dev=0xc2cb7980); pass=2147483647
  50. fdtbus0: <FDT main bus>
  51. newbus_device_from_fdt_node(): skipping instantiating FDT device='chosen'
  52. newbus_device_from_fdt_node(): skipping instantiating FDT device='aliases'
  53. newbus_device_from_fdt_node(): skipping instantiating FDT device='memory'
  54. newbus_device_create(): added child name='tz-interrupt-controller@e0000000', node=0x240
  55. newbus_device_create(): added child name='clocks', node=0x2e0
  56. newbus_device_create(): added child name='imx515', node=0x428
  57. tzic0: <TrustZone Interrupt Controller> mem 0xd00e335c-0xd00e735b on fdtbus0
  58. tzic0: interrupts 128, BH=0xd00e8000
  59. simplebus0: <Flattened device tree simple bus> on fdtbus0
  60. simplebus_attach: fsl,imx51-ccm
  61. simplebus_attach: fsl,aips-bus
  62. simplebus_attach: fsl,aips-bus
  63. imxccm0: <Freescale Clock Control Module> mem 0xd00ec000-0xd00effff,0xd00f0000-0xd00f3fff,0xd00f4000-0xd00f7fff,0xd00f8000-0xd00fbfff irq 71,72 on simplebus0
  64. MEM: 0xd80fc000 x 0x00004000
  65. MEM: 0xd8100000 x 0x00004000
  66. MEM: 0xd8104000 x 0x00004000
  67. MEM: 0xd8108000 x 0x00004000
  68. IRQ: 71
  69. IRQ: 72
  70. imxccm0: Clock control module
  71. imxccm0: PLL1=800MHz, PLL2=665MHz, PLL3=216MHz
  72. imxccm0: CPU clock=800000000, UART clock=66500000
  73. imxccm0: mainbus clock=665000000, ahb clock=133000000 ipg clock=66500000 perclk=2000000
  74. simplebus1: <Flattened device tree simple bus> mem 0xd00fc000-0xd40fbfff on simplebus0
  75. simplebus_attach: fsl,spba-bus
  76. simplebus_attach: fsl,imx51-gpio
  77. simplebus_attach: fsl,imx51-gpio
  78. simplebus_attach: fsl,imx51-gpio
  79. simplebus_attach: fsl,imx51-gpio
  80. simplebus_attach: fsl,imx51-wdt
  81. simplebus_attach: fsl,imx51-wdt
  82. simplebus_attach: fsl,imx51-gpt
  83. simplebus_attach: fsl,imx51-epit
  84. simplebus_attach: fsl,imx51-epit
  85. simplebus_attach: fsl,imx51-uart
  86. simplebus_attach: fsl,imx51-uart
  87. simplebus_attach: fsl,imx51-ehci
  88. simplebus2: <Flattened device tree simple bus> mem 0xf0000000-0xf003ffff on simplebus1
  89. simplebus_attach: fsl,imx51-esdhc
  90. simplebus_attach: fsl,imx51-esdhc
  91. simplebus_attach: fsl,imx51-uart
  92. simplebus_attach: fsl,imx51-ecspi
  93. simplebus_attach: fsl,imx51-ssi
  94. simplebus_attach: fsl,imx51-esdhc
  95. simplebus_attach: fsl,imx51-esdhc
  96. uart0: <imx_uart> mem 0xf000c000-0xf000ffff irq 33 on simplebus2
  97. uart0: fast interrupt
  98. spi0: <Freescale i.MXxxx sCSPI controller> mem 0xf0010000-0xf0013fff irq 36 on simplebus2
  99. 08: 01f02031
  100. 0c: 00001000
  101. 10: 00000000
  102. 14: 00000000
  103. 18: 00000003
  104. 1c: 00000000
  105. 20: 00000000
  106. spibus0: <spibus bus> on spi0
  107. mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
  108. device_attach: mx25l0 attach returned 6
  109. mx25l1: <M25Pxx Flash Family> at cs 1 mode 0 on spibus0
  110. t1r0, t0r5
  111. old: 02031000, OUTs: 03007c00
  112. new: 00031000
  113. 08: 01f42021
  114. 0c: 00000000
  115. 10: 00000000
  116. 14: 00000000
  117. 18: 00000000
  118. 1c: 00000000
  119. 20: 00000001
  120. <done>
  121. 08: 01f42021
  122. 0c: 00000000
  123. 10: 00000000
  124. 14: 00000000
  125. 18: 0000001b
  126. 1c: 00000000
  127. 20: 00000100
  128. rx:0 - 0x00000000
  129. rx:4 - 0x00000000
  130. old: 00031000, OUTs: 03007c00
  131. new: 02031000
  132. t1r0, t0r1
  133. old: 02031000, OUTs: 03007c00
  134. new: 00031000
  135. 08: 01f42021
  136. 0c: 00000000
  137. 10: 00000000
  138. 14: 00000000
  139. 18: 00000000
  140. 1c: 00000000
  141. 20: 00000001
  142. <done>
  143. 08: 01f42021
  144. 0c: 00000000
  145. 10: 00000000
  146. 14: 00000000
  147. 18: 0000001b
  148. 1c: 00000000
  149. 20: 00000100
  150. rx:0 - 0x00000000
  151. old: 00031000, OUTs: 03007c00
  152. new: 02031000
  153. mx25l1: at25128, sector 64 bytes, 256 sectors
  154. imx_gpt0: <Freescale i.MXxxx GPT timer> mem 0xf3fa0000-0xf3fa3fff irq 39 on simplebus1
  155. imx_gpt0: Run on 66500KHz clock.
  156. Event timer "i.MXxxx GPT Eventtimer" frequency 66500000 Hz quality 1000
  157. Timecounter "i.MX GPT Timecouter" frequency 66500000 Hz quality 1000
  158. clock: hz=100 stathz = 0
  159. imx_gpt0: timer clock frequency 66500000
  160. imx_gpt_attach: DELAY will use 200 counts
  161. imxclock0: <Freescale i.MXxxx EPIT timer> mem 0xf3fac000-0xf3faffff irq 40 on simplebus1
  162. imxclock_attach.191:done, unit=0
  163. imxclock1: <Freescale i.MXxxx EPIT timer> mem 0xf3fb0000-0xf3fb3fff irq 41 on simplebus1
  164. imxclock_attach.191:done, unit=1
  165. uart1: <imx_uart> mem 0xf3fbc000-0xf3fbffff irq 31 on simplebus1
  166. uart1: fast interrupt
  167. uart2: <imx_uart> mem 0xf3fc0000-0xf3fc3fff irq 32 on simplebus1
  168. uart2: fast interrupt
  169. ehci0: <Freescale i.MXxxx EHCI USB controller> mem 0xf3f80000-0xf3f83fff irq 14,16,17,18 on simplebus1
  170. usbus0: EHCI version 1.0
  171. usbus0 on ehci0
  172. ehci0: usbpf: Attached
  173. usb_needs_explore:
  174. usb_needs_explore: No root HUB
  175. simplebus3: <Flattened device tree simple bus> mem 0xd40fc000-0xd80fbfff on simplebus0
  176. simplebus_attach: fsl,imx51-ecspi
  177. simplebus_attach: fsl,imx51-sdma
  178. simplebus_attach: fsl,imx51-cspi
  179. simplebus_attach: fsl,imx51-i2c
  180. simplebus_attach: fsl,imx51-i2c
  181. simplebus_attach: fsl,imx51-ssi
  182. simplebus_attach: fsl,imx51-audmux
  183. simplebus_attach: fsl,imx51-ata
  184. simplebus_attach: fsl,imx51-ssi
  185. simplebus_attach: fsl,imx51-fec
  186. spi1: <Freescale i.MXxxx sCSPI controller> mem 0xd8123000-0xd8126fff irq 37 on simplebus3
  187. 08: 00000000
  188. 0c: 00000000
  189. 10: 00000000
  190. 14: 00000000
  191. 18: 00000003
  192. 1c: 00000000
  193. 20: 00000000
  194. spibus1: <spibus bus> on spi1
  195. i2c0: <I2C bus controller> mem 0xd812f000-0xd8132fff irq 63 on simplebus3
  196. i2c0: clock gate status is 3
  197. iicbus0: <Philips I2C bus> on i2c0
  198. iic0: <I2C generic I/O> on iicbus0
  199. i2c1: <I2C bus controller> mem 0xd8133000-0xd8136fff irq 62 on simplebus3
  200. i2c1: clock gate status is 3
  201. iicbus1: <Philips I2C bus> on i2c1
  202. iic1: <I2C generic I/O> on iicbus1
  203. atapci0: <Freescale Integrated PATA Controller> mem 0xd813f000-0xd8142fff irq 70 on simplebus3
  204. ata2: <ATA channel> at channel 0 on atapci0
  205. procfs registered
  206. imx_gpt0: switch DELAY to use H/W counter
  207. cpu_initclocks.271:done
  208. Timecounters tick every 10.000 msec
  209. lo0: bpf attached
  210. usb_needs_explore:
  211. usb_needs_explore: No root HUB
  212. GEOM: new disk flash/spi1
  213. usbus0: 480Mbps High Speed USB v2.0
  214. ata2: reset tp1 mask=01 ostat0=d0 ostat1=00
  215. usb_bus_port_set_device: bus 0xc2d2ac78 devices[1] = 0xc2d5c800
  216. ugen0.1: <Freescale> at usbus0
  217. uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
  218. uhub_attach: depth=0 selfpowered=1, parent=0, parent->selfpowered=0
  219. uhub_attach: Getting HUB descriptor
  220. ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
  221. ata2: reset tp2 stat0=50 stat1=00 devices=0x1
  222. pass0 at ata2 bus 0 scbus0 target 0 lun 0
  223. pass0: <SanDisk pSSD-P2 8GB SSD 5.20> ATA-8 device
  224. pass0: Serial Number CFZ071510001526
  225. pass0: 16.700MB/s transfers (PIO4, PIO 512bytes)
  226. ada0 at ata2 bus 0 scbus0 target 0 lun 0
  227. ada0: <SanDisk pSSD-P2 8GB SSD 5.20> ATA-8 device
  228. ada0: Serial Number CFZ071510001526
  229. ada0: 16.700MB/s transfers (PIO4, PIO 512bytes)
  230. ada0: 7641MB (15649200 512 byte sectors: 16H 63S/T 15525C)
  231. ada0: Previously was known as ad0
  232. GEOM: new disk ada0
  233. Root mount waiting for: usbus0
  234. uhub_attach: turn on port 1 power
  235. uhub0: 1 port with 1 removable, self powered
  236. usb_needs_explore:
  237. usb_needs_explore:
  238. usb_bus_powerd: bus=0xc2d2ac78
  239. usb_bus_powerd: Recomputing power masks
  240. uhub_read_port_status: port 1, wPortStatus=0x0501, wPortChange=0x0001, err=USB_ERR_NORMAL_COMPLETION
  241. uhub_reattach_port: reattaching port 1
  242. uhub_read_port_status: port 1, wPortStatus=0x0501, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
  243. uhub_reattach_port: Port 1 is in Host Mode
  244. usb_needs_explore:
  245. usb_needs_explore:
  246. Root mount waiting for: usbus0
  247. uhub_read_port_status: port 1, wPortStatus=0x0500, wPortChange=0x0003, err=USB_ERR_NORMAL_COMPLETION
  248. uhub_read_port_status: port 1, wPortStatus=0x0500, wPortChange=0x0002, err=USB_ERR_NORMAL_COMPLETION
  249. usb_bus_powerd: bus=0xc2d2ac78
  250. usb_bus_powerd: Recomputing power masks
  251. uhub_read_port_status: port 1, wPortStatus=0x0500, wPortChange=0x0002, err=USB_ERR_NORMAL_COMPLETION
  252. uhub_reattach_port: reattaching port 1
  253. uhub_read_port_status: port 1, wPortStatus=0x0500, wPortChange=0x0000, err=USB_ERR_NORMAL_COMPLETION
  254.  
  255. Loader variables:
  256.  
  257. Manual root filesystem specification:
  258. <fstype>:<device> [options]
  259. Mount <device> using filesystem <fstype>
  260. and with the specified (optional) option list.
  261.  
  262. eg. ufs:/dev/da0s1a
  263. zfs:tank
  264. cd9660:/dev/acd0 ro
  265. (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)
  266.  
  267. ? List valid disk boot devices
  268. . Yield 1 second (for background tasks)
  269. <empty line> Abort manual input
  270.  
  271. mountroot> usb_needs_explore:
  272. usb_bus_powerd: bus=0xc2d2ac78
  273. usb_bus_powerd: Recomputing power masks
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!