API tools faq
paste
SerialCom

Dmesg Deepin V20 1003

SerialCom
Nov 19th, 2020
101
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 58.88 KB | None | 0 0
raw download clone embed print report
  1. sudo dmesg
  2. Senha
  3. [sudo] senha para edson:
  4. Verificação Bem-sucedida
  5. [ 0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08
  6. [ 0.000000] Linux version 5.8.14-amd64-desktop (deepin@deepin-PC) (gcc (Uos 8.3.0.3-3+rebuild) 8.3.0, GNU ld (GNU Binutils for Uos) 2.31.1) #1 SMP Wed Oct 14 16:23:48 CST 2020
  7. [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.8.14-amd64-desktop root=UUID=05860a84-333e-41fd-9ff6-1069c3c4dfee ro splash quiet DEEPIN_GFXMODE=
  8. [ 0.000000] KERNEL supported cpus:
  9. [ 0.000000] Intel GenuineIntel
  10. [ 0.000000] AMD AuthenticAMD
  11. [ 0.000000] Hygon HygonGenuine
  12. [ 0.000000] Centaur CentaurHauls
  13. [ 0.000000] zhaoxin Shanghai
  14. [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
  15. [ 0.000000] BIOS-provided physical RAM map:
  16. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
  17. [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  19. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c377ffff] usable
  20. [ 0.000000] BIOS-e820: [mem 0x00000000c3780000-0x00000000c378dfff] ACPI data
  21. [ 0.000000] BIOS-e820: [mem 0x00000000c378e000-0x00000000c37cffff] ACPI NVS
  22. [ 0.000000] BIOS-e820: [mem 0x00000000c37d0000-0x00000000c37dffff] reserved
  23. [ 0.000000] BIOS-e820: [mem 0x00000000c37ed000-0x00000000cfffffff] reserved
  24. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  25. [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
  26. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
  27. [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
  28. [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000022fffffff] usable
  29. [ 0.000000] NX (Execute Disable) protection: active
  30. [ 0.000000] SMBIOS 2.6 present.
  31. [ 0.000000] DMI: Hewlett-Packard p6540br/2A9C, BIOS 6.07 05/19/2010
  32. [ 0.000000] tsc: Fast TSC calibration using PIT
  33. [ 0.000000] tsc: Detected 3059.106 MHz processor
  34. [ 0.001016] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  35. [ 0.001018] e820: remove [mem 0x000a0000-0x000fffff] usable
  36. [ 0.001024] last_pfn = 0x230000 max_arch_pfn = 0x400000000
  37. [ 0.001028] MTRR default type: uncachable
  38. [ 0.001029] MTRR fixed ranges enabled:
  39. [ 0.001030] 00000-9FFFF write-back
  40. [ 0.001031] A0000-BFFFF uncachable
  41. [ 0.001032] C0000-CFFFF write-protect
  42. [ 0.001033] D0000-DFFFF uncachable
  43. [ 0.001033] E0000-E3FFF write-protect
  44. [ 0.001034] E4000-E7FFF write-through
  45. [ 0.001035] E8000-EBFFF write-protect
  46. [ 0.001036] EC000-EFFFF write-through
  47. [ 0.001037] F0000-FFFFF write-protect
  48. [ 0.001037] MTRR variable ranges enabled:
  49. [ 0.001039] 0 base 000000000 mask E00000000 write-back
  50. [ 0.001040] 1 base 200000000 mask FC0000000 write-back
  51. [ 0.001041] 2 base 240000000 mask FE0000000 write-back
  52. [ 0.001042] 3 base 0D0000000 mask FF0000000 uncachable
  53. [ 0.001043] 4 base 0E0000000 mask FE0000000 uncachable
  54. [ 0.001044] 5 base 1FC000000 mask FFC000000 uncachable
  55. [ 0.001044] 6 disabled
  56. [ 0.001045] 7 disabled
  57. [ 0.001872] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
  58. [ 0.002065] total RAM covered: 8896M
  59. [ 0.002503] Found optimal setting for mtrr clean up
  60. [ 0.002505] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
  61. [ 0.003157] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
  62. [ 0.003161] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
  63. [ 0.003164] last_pfn = 0xc3780 max_arch_pfn = 0x400000000
  64. [ 0.011580] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
  65. [ 0.017873] check: Scanning 1 areas for low memory corruption
  66. [ 0.018332] RAMDISK: [mem 0x2f81d000-0x33c05fff]
  67. [ 0.018341] ACPI: Early table checksum verification disabled
  68. [ 0.018346] ACPI: RSDP 0x00000000000F9F10 000024 (v02 HPQOEM)
  69. [ 0.018350] ACPI: XSDT 0x00000000C3780100 00006C (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  70. [ 0.018356] ACPI: FACP 0x00000000C3780290 0000F4 (v04 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  71. [ 0.018361] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20200528/tbfadt-569)
  72. [ 0.018366] ACPI: DSDT 0x00000000C37805E0 005AB5 (v02 HPQOEM SLIC-CPC 00000007 INTL 20051117)
  73. [ 0.018369] ACPI: FACS 0x00000000C378E000 000040
  74. [ 0.018372] ACPI: FACS 0x00000000C378E000 000040
  75. [ 0.018375] ACPI: APIC 0x00000000C3780390 00008C (v02 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  76. [ 0.018378] ACPI: MCFG 0x00000000C3780420 00003C (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  77. [ 0.018381] ACPI: SLIC 0x00000000C3780460 000176 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  78. [ 0.018385] ACPI: OEMB 0x00000000C378E040 000072 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  79. [ 0.018388] ACPI: SSDT 0x00000000C378A680 000843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
  80. [ 0.018391] ACPI: HPET 0x00000000C378AED0 000038 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  81. [ 0.018395] ACPI: GSCI 0x00000000C378E0C0 002024 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
  82. [ 0.018398] ACPI: SSDT 0x00000000C3791930 000363 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
  83. [ 0.018408] ACPI: Local APIC address 0xfee00000
  84. [ 0.018517] No NUMA configuration found
  85. [ 0.018518] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
  86. [ 0.018529] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff]
  87. [ 0.018944] Zone ranges:
  88. [ 0.018945] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  89. [ 0.018947] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  90. [ 0.018948] Normal [mem 0x0000000100000000-0x000000022fffffff]
  91. [ 0.018949] Device empty
  92. [ 0.018950] Movable zone start for each node
  93. [ 0.018953] Early memory node ranges
  94. [ 0.018953] node 0: [mem 0x0000000000001000-0x000000000009dfff]
  95. [ 0.018955] node 0: [mem 0x0000000000100000-0x00000000c377ffff]
  96. [ 0.018956] node 0: [mem 0x0000000100000000-0x00000001fbffffff]
  97. [ 0.018957] node 0: [mem 0x0000000200000000-0x000000022fffffff]
  98. [ 0.019505] Zeroed struct page in unavailable ranges: 35043 pages
  99. [ 0.019506] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
  100. [ 0.019508] On node 0 totalpages: 2029341
  101. [ 0.019509] DMA zone: 64 pages used for memmap
  102. [ 0.019509] DMA zone: 21 pages reserved
  103. [ 0.019511] DMA zone: 3997 pages, LIFO batch:0
  104. [ 0.019547] DMA32 zone: 12446 pages used for memmap
  105. [ 0.019548] DMA32 zone: 796544 pages, LIFO batch:63
  106. [ 0.029106] Normal zone: 19456 pages used for memmap
  107. [ 0.029108] Normal zone: 1228800 pages, LIFO batch:63
  108. [ 0.043983] Reserving Intel graphics memory at [mem 0xc8000000-0xcfffffff]
  109. [ 0.044093] ACPI: PM-Timer IO Port: 0x808
  110. [ 0.044096] ACPI: Local APIC address 0xfee00000
  111. [ 0.044116] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
  112. [ 0.044119] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  113. [ 0.044120] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  114. [ 0.044122] ACPI: IRQ0 used by override.
  115. [ 0.044123] ACPI: IRQ9 used by override.
  116. [ 0.044125] Using ACPI (MADT) for SMP configuration information
  117. [ 0.044127] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  118. [ 0.044134] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
  119. [ 0.044152] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
  120. [ 0.044154] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
  121. [ 0.044154] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  122. [ 0.044155] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  123. [ 0.044156] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  124. [ 0.044157] PM: hibernation: Registered nosave memory: [mem 0xc3780000-0xc378dfff]
  125. [ 0.044158] PM: hibernation: Registered nosave memory: [mem 0xc378e000-0xc37cffff]
  126. [ 0.044159] PM: hibernation: Registered nosave memory: [mem 0xc37d0000-0xc37dffff]
  127. [ 0.044159] PM: hibernation: Registered nosave memory: [mem 0xc37e0000-0xc37ecfff]
  128. [ 0.044160] PM: hibernation: Registered nosave memory: [mem 0xc37ed000-0xcfffffff]
  129. [ 0.044161] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
  130. [ 0.044161] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  131. [ 0.044162] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
  132. [ 0.044163] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff]
  133. [ 0.044164] PM: hibernation: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
  134. [ 0.044166] [mem 0xd0000000-0xfedfffff] available for PCI devices
  135. [ 0.044168] Booting paravirtualized kernel on bare hardware
  136. [ 0.044172] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  137. [ 0.044178] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
  138. [ 0.044580] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
  139. [ 0.044587] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
  140. [ 0.044588] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  141. [ 0.044624] Built 1 zonelists, mobility grouping on. Total pages: 1997354
  142. [ 0.044625] Policy zone: Normal
  143. [ 0.044626] Kernel command line: BOOT_IMAGE=/vmlinuz-5.8.14-amd64-desktop root=UUID=05860a84-333e-41fd-9ff6-1069c3c4dfee ro splash quiet DEEPIN_GFXMODE=
  144. [ 0.045845] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  145. [ 0.046392] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  146. [ 0.046479] mem auto-init: stack:off, heap alloc:on, heap free:off
  147. [ 0.089231] Memory: 7805656K/8117364K available (14339K kernel code, 2537K rwdata, 5376K rodata, 2620K init, 4940K bss, 311708K reserved, 0K cma-reserved)
  148. [ 0.089241] random: get_random_u64 called from __kmem_cache_create+0x42/0x550 with crng_init=0
  149. [ 0.089430] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  150. [ 0.089447] Kernel/User page tables isolation: enabled
  151. [ 0.089468] ftrace: allocating 45661 entries in 179 pages
  152. [ 0.109609] ftrace: allocated 179 pages with 5 groups
  153. [ 0.109794] rcu: Hierarchical RCU implementation.
  154. [ 0.109796] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
  155. [ 0.109797] Trampoline variant of Tasks RCU enabled.
  156. [ 0.109797] Rude variant of Tasks RCU enabled.
  157. [ 0.109798] Tracing variant of Tasks RCU enabled.
  158. [ 0.109799] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  159. [ 0.109799] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  160. [ 0.114707] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
  161. [ 0.116907] Console: colour VGA+ 80x25
  162. [ 0.116913] printk: console [tty0] enabled
  163. [ 0.116937] ACPI: Core revision 20200528
  164. [ 0.117039] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  165. [ 0.117054] APIC: Switch to symmetric I/O mode setup
  166. [ 0.117574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  167. [ 0.137055] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c1860a30ea, max_idle_ns: 440795337180 ns
  168. [ 0.137060] Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.21 BogoMIPS (lpj=12236424)
  169. [ 0.137062] pid_max: default: 32768 minimum: 301
  170. [ 0.137098] LSM: Security Framework initializing
  171. [ 0.137109] Yama: becoming mindful.
  172. [ 0.137140] AppArmor: AppArmor initialized
  173. [ 0.137203] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  174. [ 0.137227] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  175. [ 0.137565] mce: CPU0: Thermal monitoring enabled (TM1)
  176. [ 0.137576] process: using mwait in idle threads
  177. [ 0.137579] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
  178. [ 0.137580] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
  179. [ 0.137583] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  180. [ 0.137584] Spectre V2 : Mitigation: Full generic retpoline
  181. [ 0.137585] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  182. [ 0.137585] Spectre V2 : Enabling Restricted Speculation for firmware calls
  183. [ 0.137587] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
  184. [ 0.137588] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
  185. [ 0.137589] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
  186. [ 0.137592] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
  187. [ 0.137725] Freeing SMP alternatives memory: 40K
  188. [ 0.250997] smpboot: CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz (family: 0x6, model: 0x25, stepping: 0x2)
  189. [ 0.251146] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
  190. [ 0.251153] core: CPUID marked event: 'bus cycles' unavailable
  191. [ 0.251154] ... version: 3
  192. [ 0.251154] ... bit width: 48
  193. [ 0.251155] ... generic registers: 4
  194. [ 0.251156] ... value mask: 0000ffffffffffff
  195. [ 0.251156] ... max period: 000000007fffffff
  196. [ 0.251157] ... fixed-purpose events: 3
  197. [ 0.251157] ... event mask: 000000070000000f
  198. [ 0.251206] rcu: Hierarchical SRCU implementation.
  199. [ 0.252404] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  200. [ 0.252524] smp: Bringing up secondary CPUs ...
  201. [ 0.252672] x86: Booting SMP configuration:
  202. [ 0.252673] .... node #0, CPUs: #1 #2
  203. [ 0.257176] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
  204. [ 0.257232] #3
  205. [ 0.259454] smp: Brought up 1 node, 4 CPUs
  206. [ 0.259454] smpboot: Max logical packages: 2
  207. [ 0.259454] smpboot: Total of 4 processors activated (24472.84 BogoMIPS)
  208. [ 0.261448] devtmpfs: initialized
  209. [ 0.261448] x86/mm: Memory block size: 128MB
  210. [ 0.261851] PM: Registering ACPI NVS region [mem 0xc378e000-0xc37cffff] (270336 bytes)
  211. [ 0.261851] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  212. [ 0.261851] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  213. [ 0.261851] pinctrl core: initialized pinctrl subsystem
  214. [ 0.261851] PM: RTC time: 13:50:56, date: 2020-11-19
  215. [ 0.261851] thermal_sys: Registered thermal governor 'fair_share'
  216. [ 0.261851] thermal_sys: Registered thermal governor 'bang_bang'
  217. [ 0.261851] thermal_sys: Registered thermal governor 'step_wise'
  218. [ 0.261851] thermal_sys: Registered thermal governor 'user_space'
  219. [ 0.261851] NET: Registered protocol family 16
  220. [ 0.261851] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  221. [ 0.261851] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  222. [ 0.261893] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  223. [ 0.261917] audit: initializing netlink subsys (disabled)
  224. [ 0.261951] audit: type=2000 audit(1605793856.144:1): state=initialized audit_enabled=0 res=1
  225. [ 0.261951] EISA bus registered
  226. [ 0.261951] cpuidle: using governor ladder
  227. [ 0.261951] cpuidle: using governor menu
  228. [ 0.261951] ACPI: bus type PCI registered
  229. [ 0.261951] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  230. [ 0.261951] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  231. [ 0.261951] PCI: not using MMCONFIG
  232. [ 0.261951] PCI: Using configuration type 1 for base access
  233. [ 0.266766] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  234. [ 0.266766] ACPI: Added _OSI(Module Device)
  235. [ 0.266766] ACPI: Added _OSI(Processor Device)
  236. [ 0.266766] ACPI: Added _OSI(3.0 _SCP Extensions)
  237. [ 0.266766] ACPI: Added _OSI(Processor Aggregator Device)
  238. [ 0.266766] ACPI: Added _OSI(Linux-Dell-Video)
  239. [ 0.266766] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  240. [ 0.266766] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
  241. [ 0.273058] ACPI: 3 ACPI AML tables successfully acquired and loaded
  242. [ 0.273059] ACPI: Dynamic OEM Table Load:
  243. [ 0.273059] ACPI: SSDT 0xFFFF8ACD264F2000 001340 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
  244. [ 0.273395] ACPI: Dynamic OEM Table Load:
  245. [ 0.273399] ACPI: SSDT 0xFFFF8ACD264EB800 0004F4 (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117)
  246. [ 0.274299] ACPI: Interpreter enabled
  247. [ 0.274319] ACPI: (supports S0 S1 S3 S4 S5)
  248. [ 0.274320] ACPI: Using IOAPIC for interrupt routing
  249. [ 0.274355] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  250. [ 0.277062] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  251. [ 0.277062] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  252. [ 0.277062] ACPI: Enabled 14 GPEs in block 00 to 3F
  253. [ 0.286484] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  254. [ 0.286491] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
  255. [ 0.286495] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  256. [ 0.286844] PCI host bridge to bus 0000:00
  257. [ 0.286847] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  258. [ 0.286848] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  259. [ 0.286849] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  260. [ 0.286850] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
  261. [ 0.286851] pci_bus 0000:00: root bus resource [mem 0xc4000000-0xdfffffff window]
  262. [ 0.286852] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
  263. [ 0.286854] pci_bus 0000:00: root bus resource [bus 00-ff]
  264. [ 0.286863] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
  265. [ 0.286884] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
  266. [ 0.286973] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
  267. [ 0.286983] pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
  268. [ 0.286987] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
  269. [ 0.286990] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
  270. [ 0.287120] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
  271. [ 0.287148] pci 0000:00:16.0: reg 0x10: [mem 0xfbefbc00-0xfbefbc0f 64bit]
  272. [ 0.287236] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  273. [ 0.287331] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
  274. [ 0.287350] pci 0000:00:1a.0: reg 0x10: [mem 0xfbef8000-0xfbef83ff]
  275. [ 0.287420] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  276. [ 0.287524] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
  277. [ 0.287542] pci 0000:00:1b.0: reg 0x10: [mem 0xfbef4000-0xfbef7fff 64bit]
  278. [ 0.287605] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  279. [ 0.287696] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
  280. [ 0.287764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  281. [ 0.287878] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
  282. [ 0.287896] pci 0000:00:1d.0: reg 0x10: [mem 0xfbef2000-0xfbef23ff]
  283. [ 0.287968] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  284. [ 0.288081] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
  285. [ 0.288219] pci 0000:00:1f.0: [8086:3b08] type 00 class 0x060100
  286. [ 0.288407] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
  287. [ 0.288422] pci 0000:00:1f.2: reg 0x10: [io 0xd880-0xd887]
  288. [ 0.288427] pci 0000:00:1f.2: reg 0x14: [io 0xd800-0xd803]
  289. [ 0.288433] pci 0000:00:1f.2: reg 0x18: [io 0xd480-0xd487]
  290. [ 0.288439] pci 0000:00:1f.2: reg 0x1c: [io 0xd400-0xd403]
  291. [ 0.288445] pci 0000:00:1f.2: reg 0x20: [io 0xd080-0xd09f]
  292. [ 0.288451] pci 0000:00:1f.2: reg 0x24: [mem 0xfbef0000-0xfbef07ff]
  293. [ 0.288485] pci 0000:00:1f.2: PME# supported from D3hot
  294. [ 0.288581] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
  295. [ 0.288596] pci 0000:00:1f.3: reg 0x10: [mem 0xfbefb800-0xfbefb8ff 64bit]
  296. [ 0.288612] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
  297. [ 0.288755] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
  298. [ 0.288780] pci 0000:01:00.0: reg 0x10: [io 0xe800-0xe8ff]
  299. [ 0.288805] pci 0000:01:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit]
  300. [ 0.288820] pci 0000:01:00.0: reg 0x20: [mem 0xfaffc000-0xfaffffff 64bit pref]
  301. [ 0.288830] pci 0000:01:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
  302. [ 0.288909] pci 0000:01:00.0: supports D1 D2
  303. [ 0.288910] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  304. [ 0.301095] pci 0000:00:1c.0: PCI bridge to [bus 01]
  305. [ 0.301101] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
  306. [ 0.301105] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
  307. [ 0.301112] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
  308. [ 0.301136] pci_bus 0000:02: extended config space not accessible
  309. [ 0.301198] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
  310. [ 0.301206] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
  311. [ 0.301207] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
  312. [ 0.301208] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
  313. [ 0.301209] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
  314. [ 0.301210] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xdfffffff window] (subtractive decode)
  315. [ 0.301211] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
  316. [ 0.301692] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
  317. [ 0.301761] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
  318. [ 0.301828] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
  319. [ 0.301896] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
  320. [ 0.301964] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
  321. [ 0.302032] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
  322. [ 0.302100] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
  323. [ 0.302168] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
  324. [ 0.302324] iommu: Default domain type: Translated
  325. [ 0.302324] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  326. [ 0.302324] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  327. [ 0.302324] pci 0000:00:02.0: vgaarb: bridge control possible
  328. [ 0.302324] vgaarb: loaded
  329. [ 0.305184] SCSI subsystem initialized
  330. [ 0.305198] libata version 3.00 loaded.
  331. [ 0.305198] ACPI: bus type USB registered
  332. [ 0.305198] usbcore: registered new interface driver usbfs
  333. [ 0.305198] usbcore: registered new interface driver hub
  334. [ 0.305198] usbcore: registered new device driver usb
  335. [ 0.305198] pps_core: LinuxPPS API ver. 1 registered
  336. [ 0.305198] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  337. [ 0.305198] PTP clock support registered
  338. [ 0.305198] EDAC MC: Ver: 3.0.0
  339. [ 0.305202] NetLabel: Initializing
  340. [ 0.305203] NetLabel: domain hash size = 128
  341. [ 0.305204] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  342. [ 0.305219] NetLabel: unlabeled traffic allowed by default
  343. [ 0.305234] PCI: Using ACPI for IRQ routing
  344. [ 0.310782] PCI: Discovered peer bus ff
  345. [ 0.310783] PCI: root bus ff: using default resources
  346. [ 0.310784] PCI: Probing PCI hardware (bus ff)
  347. [ 0.310805] PCI host bridge to bus 0000:ff
  348. [ 0.310807] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
  349. [ 0.310808] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
  350. [ 0.310809] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
  351. [ 0.310811] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
  352. [ 0.310815] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
  353. [ 0.310855] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
  354. [ 0.310892] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
  355. [ 0.310926] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
  356. [ 0.310960] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
  357. [ 0.310994] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
  358. [ 0.311044] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
  359. [ 0.311046] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
  360. [ 0.311048] PCI: pci_cache_line_size set to 64 bytes
  361. [ 0.311077] Expanded resource Reserved due to conflict with PCI Bus 0000:00
  362. [ 0.311078] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
  363. [ 0.311079] e820: reserve RAM buffer [mem 0xc3780000-0xc3ffffff]
  364. [ 0.311087] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  365. [ 0.311087] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  366. [ 0.313085] clocksource: Switched to clocksource tsc-early
  367. [ 0.329209] VFS: Disk quotas dquot_6.6.0
  368. [ 0.329230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  369. [ 0.329360] AppArmor: AppArmor Filesystem Enabled
  370. [ 0.329393] pnp: PnP ACPI init
  371. [ 0.329504] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
  372. [ 0.329506] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
  373. [ 0.329507] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
  374. [ 0.329508] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
  375. [ 0.329515] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  376. [ 0.329607] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
  377. [ 0.329769] system 00:02: [io 0x0a00-0x0a0f] has been reserved
  378. [ 0.329773] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  379. [ 0.329961] system 00:03: [io 0x04d0-0x04d1] has been reserved
  380. [ 0.329962] system 00:03: [io 0x0800-0x087f] has been reserved
  381. [ 0.329964] system 00:03: [io 0x0500-0x057f] has been reserved
  382. [ 0.329965] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
  383. [ 0.329967] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
  384. [ 0.329968] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
  385. [ 0.329972] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
  386. [ 0.330149] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
  387. [ 0.330151] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
  388. [ 0.330155] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  389. [ 0.330224] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
  390. [ 0.330228] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  391. [ 0.330494] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
  392. [ 0.330495] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
  393. [ 0.330496] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
  394. [ 0.330498] system 00:06: [mem 0x00100000-0xc3ffffff] could not be reserved
  395. [ 0.330499] system 00:06: [mem 0xfed90000-0xffffffff] could not be reserved
  396. [ 0.330503] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
  397. [ 0.330666] pnp: PnP ACPI: found 7 devices
  398. [ 0.336473] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  399. [ 0.336534] NET: Registered protocol family 2
  400. [ 0.336777] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  401. [ 0.336906] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  402. [ 0.337205] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
  403. [ 0.337446] TCP: Hash tables configured (established 65536 bind 65536)
  404. [ 0.337510] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
  405. [ 0.337574] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
  406. [ 0.337694] NET: Registered protocol family 1
  407. [ 0.337699] NET: Registered protocol family 44
  408. [ 0.337713] pci 0000:00:1c.0: PCI bridge to [bus 01]
  409. [ 0.337716] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
  410. [ 0.337720] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
  411. [ 0.337722] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
  412. [ 0.337727] pci 0000:00:1e.0: PCI bridge to [bus 02]
  413. [ 0.337736] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  414. [ 0.337737] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  415. [ 0.337738] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  416. [ 0.337739] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
  417. [ 0.337740] pci_bus 0000:00: resource 8 [mem 0xc4000000-0xdfffffff window]
  418. [ 0.337741] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
  419. [ 0.337742] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
  420. [ 0.337743] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
  421. [ 0.337744] pci_bus 0000:01: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
  422. [ 0.337745] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
  423. [ 0.337747] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
  424. [ 0.337748] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
  425. [ 0.337749] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
  426. [ 0.337750] pci_bus 0000:02: resource 8 [mem 0xc4000000-0xdfffffff window]
  427. [ 0.337751] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfed8ffff window]
  428. [ 0.337829] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
  429. [ 0.337830] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
  430. [ 0.337848] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
  431. [ 0.337853] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  432. [ 0.338260] PCI: CLS 32 bytes, default 64
  433. [ 0.338310] Trying to unpack rootfs image as initramfs...
  434. [ 1.273018] Freeing initrd memory: 69540K
  435. [ 1.273098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  436. [ 1.273100] software IO TLB: mapped [mem 0xbf780000-0xc3780000] (64MB)
  437. [ 1.273306] check: Scanning for low memory corruption every 60 seconds
  438. [ 1.273820] Initialise system trusted keyrings
  439. [ 1.273829] Key type blacklist registered
  440. [ 1.273863] workingset: timestamp_bits=36 max_order=21 bucket_order=0
  441. [ 1.275253] zbud: loaded
  442. [ 1.275556] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  443. [ 1.275727] fuse: init (API version 7.31)
  444. [ 1.275892] integrity: Platform Keyring initialized
  445. [ 1.285137] Key type asymmetric registered
  446. [ 1.285138] Asymmetric key parser 'x509' registered
  447. [ 1.285147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  448. [ 1.285195] io scheduler mq-deadline registered
  449. [ 1.285258] start plist test
  450. [ 1.287104] end plist test
  451. [ 1.287436] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  452. [ 1.287487] intel_idle: MWAIT substates: 0x1120
  453. [ 1.287488] intel_idle: v0.5.1 model 0x25
  454. [ 1.287650] intel_idle: Local APIC timer is reliable in all C-states
  455. [ 1.287755] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  456. [ 1.287777] ACPI: Power Button [PWRB]
  457. [ 1.287810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  458. [ 1.287843] ACPI: Power Button [PWRF]
  459. [ 1.288349] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  460. [ 1.292172] Linux agpgart interface v0.103
  461. [ 1.295045] loop: module loaded
  462. [ 1.295353] libphy: Fixed MDIO Bus: probed
  463. [ 1.295354] tun: Universal TUN/TAP device driver, 1.6
  464. [ 1.295411] PPP generic driver version 2.4.2
  465. [ 1.295508] VFIO - User Level meta-driver version: 0.3
  466. [ 1.295607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  467. [ 1.295610] ehci-pci: EHCI PCI platform driver
  468. [ 1.295808] ehci-pci 0000:00:1a.0: EHCI Host Controller
  469. [ 1.295814] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  470. [ 1.295825] ehci-pci 0000:00:1a.0: debug port 2
  471. [ 1.299741] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
  472. [ 1.299757] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbef8000
  473. [ 1.313162] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  474. [ 1.313256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
  475. [ 1.313260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  476. [ 1.313262] usb usb1: Product: EHCI Host Controller
  477. [ 1.313264] usb usb1: Manufacturer: Linux 5.8.14-amd64-desktop ehci_hcd
  478. [ 1.313266] usb usb1: SerialNumber: 0000:00:1a.0
  479. [ 1.313594] hub 1-0:1.0: USB hub found
  480. [ 1.313612] hub 1-0:1.0: 2 ports detected
  481. [ 1.313868] ehci-pci 0000:00:1d.0: EHCI Host Controller
  482. [ 1.313873] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  483. [ 1.313881] ehci-pci 0000:00:1d.0: debug port 2
  484. [ 1.317776] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
  485. [ 1.317787] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbef2000
  486. [ 1.333148] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  487. [ 1.333281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
  488. [ 1.333282] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  489. [ 1.333284] usb usb2: Product: EHCI Host Controller
  490. [ 1.333285] usb usb2: Manufacturer: Linux 5.8.14-amd64-desktop ehci_hcd
  491. [ 1.333286] usb usb2: SerialNumber: 0000:00:1d.0
  492. [ 1.333562] hub 2-0:1.0: USB hub found
  493. [ 1.333579] hub 2-0:1.0: 2 ports detected
  494. [ 1.333727] ehci-platform: EHCI generic platform driver
  495. [ 1.333736] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  496. [ 1.333739] ohci-pci: OHCI PCI platform driver
  497. [ 1.333746] ohci-platform: OHCI generic platform driver
  498. [ 1.333751] uhci_hcd: USB Universal Host Controller Interface driver
  499. [ 1.333801] i8042: PNP: No PS/2 controller found.
  500. [ 1.334106] mousedev: PS/2 mouse device common for all mice
  501. [ 1.334711] rtc_cmos 00:01: RTC can wake from S4
  502. [ 1.334969] rtc_cmos 00:01: registered as rtc0
  503. [ 1.335029] rtc_cmos 00:01: setting system clock to 2020-11-19T13:50:57 UTC (1605793857)
  504. [ 1.335045] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  505. [ 1.335057] i2c /dev entries driver
  506. [ 1.335102] device-mapper: uevent: version 1.0.3
  507. [ 1.335157] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
  508. [ 1.335176] platform eisa.0: Probing EISA bus 0
  509. [ 1.335178] platform eisa.0: EISA: Cannot allocate resource for mainboard
  510. [ 1.335179] platform eisa.0: Cannot allocate resource for EISA slot 1
  511. [ 1.335180] platform eisa.0: Cannot allocate resource for EISA slot 2
  512. [ 1.335181] platform eisa.0: Cannot allocate resource for EISA slot 3
  513. [ 1.335182] platform eisa.0: Cannot allocate resource for EISA slot 4
  514. [ 1.335183] platform eisa.0: Cannot allocate resource for EISA slot 5
  515. [ 1.335184] platform eisa.0: Cannot allocate resource for EISA slot 6
  516. [ 1.335185] platform eisa.0: Cannot allocate resource for EISA slot 7
  517. [ 1.335186] platform eisa.0: Cannot allocate resource for EISA slot 8
  518. [ 1.335187] platform eisa.0: EISA: Detected 0 cards
  519. [ 1.335189] intel_pstate: CPU model not supported
  520. [ 1.335234] ledtrig-cpu: registered to indicate activity on CPUs
  521. [ 1.335246] hid: raw HID events driver (C) Jiri Kosina
  522. [ 1.335333] drop_monitor: Initializing network drop monitor service
  523. [ 1.335506] NET: Registered protocol family 10
  524. [ 1.340751] Segment Routing with IPv6
  525. [ 1.340781] NET: Registered protocol family 17
  526. [ 1.340829] Key type dns_resolver registered
  527. [ 1.341157] microcode: sig=0x20652, pf=0x2, revision=0x11
  528. [ 1.341230] microcode: Microcode Update Driver: v2.2.
  529. [ 1.341235] IPI shorthand broadcast: enabled
  530. [ 1.341243] sched_clock: Marking stable (1339236603, 1988925)->(1352082873, -10857345)
  531. [ 1.341350] registered taskstats version 1
  532. [ 1.341363] Loading compiled-in X.509 certificates
  533. [ 1.342233] Loaded X.509 cert 'Build time autogenerated kernel key: 5be4ea83d3da3d0516bbe1ee182577b373e5df8e'
  534. [ 1.342275] zswap: loaded using pool lzo/zbud
  535. [ 1.342366] Key type ._fscrypt registered
  536. [ 1.342367] Key type .fscrypt registered
  537. [ 1.342367] Key type fscrypt-provisioning registered
  538. [ 1.344646] Key type encrypted registered
  539. [ 1.344649] AppArmor: AppArmor sha1 policy hashing enabled
  540. [ 1.344656] ima: No TPM chip found, activating TPM-bypass!
  541. [ 1.344660] ima: Allocated hash algorithm: sha1
  542. [ 1.344668] ima: No architecture policies found
  543. [ 1.344683] evm: Initialising EVM extended attributes:
  544. [ 1.344683] evm: security.selinux
  545. [ 1.344684] evm: security.SMACK64
  546. [ 1.344684] evm: security.SMACK64EXEC
  547. [ 1.344685] evm: security.SMACK64TRANSMUTE
  548. [ 1.344685] evm: security.SMACK64MMAP
  549. [ 1.344685] evm: security.apparmor
  550. [ 1.344686] evm: security.ima
  551. [ 1.344686] evm: security.capability
  552. [ 1.344687] evm: HMAC attrs: 0x1
  553. [ 1.345039] PM: Magic number: 12:624:837
  554. [ 1.346016] RAS: Correctable Errors collector initialized.
  555. [ 1.347680] Freeing unused decrypted memory: 2040K
  556. [ 1.348239] Freeing unused kernel image (initmem) memory: 2620K
  557. [ 1.369147] Write protecting the kernel read-only data: 22528k
  558. [ 1.369966] Freeing unused kernel image (text/rodata gap) memory: 2044K
  559. [ 1.370227] Freeing unused kernel image (rodata/data gap) memory: 768K
  560. [ 1.419960] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  561. [ 1.420018] x86/mm: Checking user space page tables
  562. [ 1.469525] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  563. [ 1.469532] Run /init as init process
  564. [ 1.469534] with arguments:
  565. [ 1.469535] /init
  566. [ 1.469536] splash
  567. [ 1.469536] with environment:
  568. [ 1.469537] HOME=/
  569. [ 1.469537] TERM=linux
  570. [ 1.469538] BOOT_IMAGE=/vmlinuz-5.8.14-amd64-desktop
  571. [ 1.469538] DEEPIN_GFXMODE=
  572. [ 1.573215] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
  573. [ 1.575928] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20200528/utaddress-213)
  574. [ 1.575941] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  575. [ 1.575980] lpc_ich: Resource conflict(s) found affecting gpio_ich
  576. [ 1.578507] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
  577. [ 1.578569] ahci 0000:00:1f.2: version 3.0
  578. [ 1.578638] i2c i2c-0: 3/4 memory slots populated (from DMI)
  579. [ 1.578778] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  580. [ 1.578955] i2c i2c-0: Successfully instantiated SPD at 0x50
  581. [ 1.579257] i2c i2c-0: Successfully instantiated SPD at 0x51
  582. [ 1.579825] i2c i2c-0: Successfully instantiated SPD at 0x52
  583. [ 1.580142] libphy: r8169: probed
  584. [ 1.580756] r8169 0000:01:00.0 eth0: RTL8168d/8111d, d4:85:64:ce:9c:0d, XID 281, IRQ 25
  585. [ 1.580759] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
  586. [ 1.588877] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
  587. [ 1.588881] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
  588. [ 1.607602] r8169 0000:01:00.0 enp1s0: renamed from eth0
  589. [ 1.617911] gpio_ich gpio_ich.2.auto: GPIO from 436 to 511
  590. [ 1.645821] scsi host0: ahci
  591. [ 1.646022] scsi host1: ahci
  592. [ 1.646156] scsi host2: ahci
  593. [ 1.646304] scsi host3: ahci
  594. [ 1.646438] scsi host4: ahci
  595. [ 1.646576] scsi host5: ahci
  596. [ 1.646642] ata1: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0100 irq 26
  597. [ 1.646644] ata2: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0180 irq 26
  598. [ 1.646646] ata3: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0200 irq 26
  599. [ 1.646647] ata4: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0280 irq 26
  600. [ 1.646649] ata5: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0300 irq 26
  601. [ 1.646651] ata6: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0380 irq 26
  602. [ 1.649080] usb 1-1: new high-speed USB device number 2 using ehci-pci
  603. [ 1.652116] pci 0000:00:00.0: Intel HD Graphics Chipset
  604. [ 1.652131] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  605. [ 1.652794] pci 0000:00:00.0: detected 131072K stolen memory
  606. [ 1.652846] i915 0000:00:02.0: vgaarb: deactivate vga console
  607. [ 1.653294] Console: switching to colour dummy device 80x25
  608. [ 1.654089] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  609. [ 1.654715] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  610. [ 1.667606] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
  611. [ 1.673084] usb 2-1: new high-speed USB device number 2 using ehci-pci
  612. [ 1.693413] fbcon: i915drmfb (fb0) is primary device
  613. [ 1.784566] Console: switching to colour frame buffer device 240x67
  614. [ 1.805482] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
  615. [ 1.805484] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  616. [ 1.805695] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
  617. [ 1.805726] hub 1-1:1.0: USB hub found
  618. [ 1.805875] hub 1-1:1.0: 6 ports detected
  619. [ 1.829766] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
  620. [ 1.829770] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  621. [ 1.830023] hub 2-1:1.0: USB hub found
  622. [ 1.830086] hub 2-1:1.0: 8 ports detected
  623. [ 1.960553] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  624. [ 1.961328] ata1.00: ATA-8: WDC WD10EADS-65P6B0, 01.00A01, max UDMA/133
  625. [ 1.961332] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
  626. [ 1.962238] ata1.00: configured for UDMA/133
  627. [ 1.962503] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-65P 0A01 PQ: 0 ANSI: 5
  628. [ 1.962677] sd 0:0:0:0: Attached scsi generic sg0 type 0
  629. [ 1.962694] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  630. [ 1.962707] sd 0:0:0:0: [sda] Write Protect is off
  631. [ 1.962708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  632. [ 1.962722] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  633. [ 2.093143] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
  634. [ 2.097153] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
  635. [ 2.098366] sd 0:0:0:0: [sda] Attached SCSI disk
  636. [ 2.117141] usb 2-1.7: new high-speed USB device number 3 using ehci-pci
  637. [ 2.207799] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=0841, bcdDevice= 1.00
  638. [ 2.207803] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  639. [ 2.207805] usb 1-1.3: Product: HP USB Multimedia Keyboard
  640. [ 2.207807] usb 1-1.3: Manufacturer: CHICONY
  641. [ 2.218725] usbcore: registered new interface driver usbhid
  642. [ 2.218726] usbhid: USB HID core driver
  643. [ 2.220413] usbcore: registered new interface driver usbkbd
  644. [ 2.222883] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04F2:0841.0001/input/input2
  645. [ 2.240725] usb 2-1.7: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
  646. [ 2.240727] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  647. [ 2.240728] usb 2-1.7: Product: USB2.0-CRW
  648. [ 2.240729] usb 2-1.7: Manufacturer: Generic
  649. [ 2.240730] usb 2-1.7: SerialNumber: 20060413092100000
  650. [ 2.245618] usb-storage 2-1.7:1.0: USB Mass Storage device detected
  651. [ 2.245746] scsi host6: usb-storage 2-1.7:1.0
  652. [ 2.245831] usbcore: registered new interface driver usb-storage
  653. [ 2.247140] usbcore: registered new interface driver uas
  654. [ 2.276104] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  655. [ 2.276998] ata2.00: ATA-8: ST1000DM003-1CH162, CC43, max UDMA/133
  656. [ 2.277001] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
  657. [ 2.277964] ata2.00: configured for UDMA/133
  658. [ 2.278187] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC43 PQ: 0 ANSI: 5
  659. [ 2.278374] sd 1:0:0:0: Attached scsi generic sg1 type 0
  660. [ 2.278497] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  661. [ 2.278499] sd 1:0:0:0: [sdb] 4096-byte physical blocks
  662. [ 2.278511] sd 1:0:0:0: [sdb] Write Protect is off
  663. [ 2.278513] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  664. [ 2.278527] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  665. [ 2.285554] hid-generic 0003:04F2:0841.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input0
  666. [ 2.285765] input: CHICONY HP USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F2:0841.0002/input/input3
  667. [ 2.289144] tsc: Refined TSC clocksource calibration: 3059.176 MHz
  668. [ 2.289147] usb 1-1.4: new low-speed USB device number 4 using ehci-pci
  669. [ 2.289156] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c18a318d9d, max_idle_ns: 440795359963 ns
  670. [ 2.289188] clocksource: Switched to clocksource tsc
  671. [ 2.339878] sdb: sdb1 sdb2 sdb3 sdb4
  672. [ 2.340950] sd 1:0:0:0: [sdb] Attached SCSI disk
  673. [ 2.349387] input: CHICONY HP USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F2:0841.0002/input/input4
  674. [ 2.349653] hid-generic 0003:04F2:0841.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input1
  675. [ 2.401767] usb 1-1.4: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00
  676. [ 2.401771] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  677. [ 2.401774] usb 1-1.4: Product: Microsoft USB Optical Mouse
  678. [ 2.401777] usb 1-1.4: Manufacturer: PixArt
  679. [ 2.404551] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:00CB.0003/input/input6
  680. [ 2.404811] hid-generic 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:1a.0-1.4/input0
  681. [ 2.406599] usbcore: registered new interface driver usbmouse
  682. [ 2.418887] random: fast init done
  683. [ 2.485143] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
  684. [ 2.592493] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  685. [ 2.594649] ata3.00: ATAPI: hp DDVDW TS-H653R, 0E00, max UDMA/100
  686. [ 2.597086] ata3.00: configured for UDMA/100
  687. [ 2.598730] scsi 2:0:0:0: CD-ROM hp CDDVDW TS-H653R 0E00 PQ: 0 ANSI: 5
  688. [ 2.606279] usb 1-1.6: New USB device found, idVendor=1871, idProduct=0142, bcdDevice= 0.0c
  689. [ 2.606282] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  690. [ 2.606284] usb 1-1.6: Product: USB2.0 Camera
  691. [ 2.606287] usb 1-1.6: Manufacturer: AVEO Technology Corp.
  692. [ 2.660390] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
  693. [ 2.660393] cdrom: Uniform CD-ROM driver Revision: 3.20
  694. [ 2.673599] sr 2:0:0:0: Attached scsi CD-ROM sr0
  695. [ 2.673693] sr 2:0:0:0: Attached scsi generic sg2 type 5
  696. [ 2.988705] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  697. [ 2.998230] ata4.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
  698. [ 2.998233] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
  699. [ 3.043127] ata4.00: configured for UDMA/133
  700. [ 3.043279] scsi 3:0:0:0: Direct-Access ATA ST500LT012-9WS14 SDM1 PQ: 0 ANSI: 5
  701. [ 3.043450] sd 3:0:0:0: Attached scsi generic sg3 type 0
  702. [ 3.043490] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  703. [ 3.043492] sd 3:0:0:0: [sdc] 4096-byte physical blocks
  704. [ 3.043504] sd 3:0:0:0: [sdc] Write Protect is off
  705. [ 3.043506] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  706. [ 3.043536] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  707. [ 3.060412] sdc: sdc1 sdc2
  708. [ 3.061013] sd 3:0:0:0: [sdc] Attached SCSI disk
  709. [ 3.254777] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
  710. [ 3.260116] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
  711. [ 3.265378] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
  712. [ 3.270616] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
  713. [ 3.271102] sd 6:0:0:0: Attached scsi generic sg4 type 0
  714. [ 3.271260] sd 6:0:0:1: Attached scsi generic sg5 type 0
  715. [ 3.271385] sd 6:0:0:2: Attached scsi generic sg6 type 0
  716. [ 3.271538] sd 6:0:0:3: Attached scsi generic sg7 type 0
  717. [ 3.286332] sd 6:0:0:0: [sdd] Attached SCSI removable disk
  718. [ 3.290157] sd 6:0:0:1: [sde] Attached SCSI removable disk
  719. [ 3.298483] sd 6:0:0:3: [sdg] Attached SCSI removable disk
  720. [ 3.299388] sd 6:0:0:2: [sdf] Attached SCSI removable disk
  721. [ 3.355973] ata5: SATA link down (SStatus 0 SControl 300)
  722. [ 3.672631] ata6: SATA link down (SStatus 0 SControl 300)
  723. [ 4.542104] random: crng init done
  724. [ 5.241063] raid6: sse2x4 gen() 11911 MB/s
  725. [ 5.309061] raid6: sse2x4 xor() 6030 MB/s
  726. [ 5.377061] raid6: sse2x2 gen() 12068 MB/s
  727. [ 5.445063] raid6: sse2x2 xor() 7404 MB/s
  728. [ 5.513063] raid6: sse2x1 gen() 10060 MB/s
  729. [ 5.581064] raid6: sse2x1 xor() 6145 MB/s
  730. [ 5.581065] raid6: using algorithm sse2x2 gen() 12068 MB/s
  731. [ 5.581065] raid6: .... xor() 7404 MB/s, rmw enabled
  732. [ 5.581066] raid6: using ssse3x2 recovery algorithm
  733. [ 5.582196] xor: measuring software checksum speed
  734. [ 5.621061] prefetch64-sse: 14102.000 MB/sec
  735. [ 5.661060] generic_sse: 12215.000 MB/sec
  736. [ 5.661061] xor: using function: prefetch64-sse (14102.000 MB/sec)
  737. [ 5.662122] async_tx: api initialized (async)
  738. [ 6.907823] process '/usr/bin/fstype' started with executable stack
  739. [ 6.926180] PM: Image not found (code -22)
  740. [ 7.606767] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  741. [ 8.606883] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
  742. [ 8.768309] systemd[1]: Inserted module 'autofs4'
  743. [ 8.899248] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  744. [ 8.917220] systemd[1]: Detected architecture x86-64.
  745. [ 8.945586] systemd[1]: Set hostname to <edson-PC6450br>.
  746. [ 10.944878] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
  747. [ 10.960514] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
  748. [ 11.012713] systemd[1]: Configuration file /lib/systemd/system/com.deepin.userexperience.Daemon.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  749. [ 11.109023] systemd[1]: Listening on Journal Socket.
  750. [ 11.109941] systemd[1]: Created slice system-getty.slice.
  751. [ 11.110044] systemd[1]: Listening on Journal Socket (/dev/log).
  752. [ 11.110113] systemd[1]: Listening on initctl Compatibility Named Pipe.
  753. [ 11.395408] EXT4-fs (sda5): re-mounted. Opts: (null)
  754. [ 11.509626] vfs_monitor: loading out-of-tree module taints kernel.
  755. [ 11.509666] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
  756. [ 11.510080] mp: /, major: 8, minor: 5
  757. [ 11.510081] partition count: 1, comm[327]: systemd-modules, path: /usr/lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
  758. [ 11.580330] register_kretprobes 10 ok
  759. [ 12.836289] input: PC Speaker as /devices/platform/pcspkr/input/input7
  760. [ 13.039411] iTCO_vendor_support: vendor-support=0
  761. [ 13.042272] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  762. [ 13.042335] iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
  763. [ 13.042696] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  764. [ 13.051375] at24 0-0050: supply vcc not found, using dummy regulator
  765. [ 13.052068] at24 0-0050: 256 byte spd EEPROM, read-only
  766. [ 13.052199] at24 0-0051: supply vcc not found, using dummy regulator
  767. [ 13.052844] at24 0-0051: 256 byte spd EEPROM, read-only
  768. [ 13.052875] at24 0-0052: supply vcc not found, using dummy regulator
  769. [ 13.053427] at24 0-0052: 256 byte spd EEPROM, read-only
  770. [ 13.329553] Error: Driver 'pcspkr' is already registered, aborting...
  771. [ 13.403191] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
  772. [ 13.849181] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  773. [ 14.293295] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  774. [ 14.293298] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  775. [ 14.293300] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  776. [ 14.293301] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
  777. [ 14.293302] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
  778. [ 14.293304] snd_hda_codec_realtek hdaudioC0D0: inputs:
  779. [ 14.293306] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
  780. [ 14.293308] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
  781. [ 14.293309] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
  782. [ 14.309886] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  783. [ 14.309968] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  784. [ 14.310044] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  785. [ 14.310120] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  786. [ 14.310202] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  787. [ 14.310285] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  788. [ 14.310367] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
  789. [ 14.310457] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
  790. [ 14.739452] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  791. [ 14.739885] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  792. [ 15.653100] Adding 11534332k swap on /dev/sda4. Priority:-2 extents:1 across:11534332k FS
  793. [ 16.212279] mc: Linux media interface: v0.10
  794. [ 16.364124] videodev: Linux video capture interface: v2.00
  795. [ 16.740941] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  796. [ 16.740968] partition /boot [8, 1] added, comm[3229]: mount
  797. [ 16.848739] usb 1-1.6: 3:1: cannot get freq at ep 0x84
  798. [ 16.850353] usb 1-1.6: Warning! Unlikely big volume range (=8191), cval->res is probably wrong.
  799. [ 16.850355] usb 1-1.6: [3] FU [Mic Capture Volume] ch = 1, val = 0/8191/1
  800. [ 16.850560] usbcore: registered new interface driver snd-usb-audio
  801. [ 16.851411] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0142)
  802. [ 16.853396] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
  803. [ 16.853399] uvcvideo 1-1.6:1.0: Entity type for entity Processing 3 was not initialized!
  804. [ 16.853400] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
  805. [ 16.853555] input: USB2.0 Camera: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16
  806. [ 16.853843] usbcore: registered new interface driver uvcvideo
  807. [ 16.853844] USB Video Class driver (1.1.1)
  808. [ 17.541878] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  809. [ 17.541908] partition /recovery [8, 3] added, comm[3875]: mount
  810. [ 30.305391] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  811. [ 30.305425] partition /data [8, 7] added, comm[4528]: mount
  812. [ 30.481203] partition /root [8, 7] added, comm[4531]: mount
  813. [ 30.541561] partition /opt [8, 7] added, comm[4532]: mount
  814. [ 30.588336] partition /home [8, 7] added, comm[4533]: mount
  815. [ 30.608633] partition /var [8, 7] added, comm[4534]: mount
  816. [ 30.653945] systemd-journald[322]: Received request to flush runtime journal from PID 1
  817. [ 31.154591] systemd-journald[322]: File /var/log/journal/4dad37d2b6bb40fd9362d3d0816c4d7b/system.journal corrupted or uncleanly shut down, renaming and replacing.
  818. [ 38.273283] RTL8211B Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
  819. [ 38.383035] r8169 0000:01:00.0 enp1s0: Link is Down
  820. [ 41.433701] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control off
  821. [ 41.433714] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
  822. [ 44.806884] broken atomic modeset userspace detected, disabling atomic
  823. [ 64.304398] systemd-journald[322]: Failed to read journal file /var/log/journal/4dad37d2b6bb40fd9362d3d0816c4d7b/user-1000.journal for rotation, trying to move it out of the way: Device or resource busy
  824. [ 120.013219] partition /media/edson/EA4CE4E44CE4AD0F [8, 33] added, comm[5970]: mount.ntfs
  825. [ 121.085852] EXT4-fs (sdb4): recovery complete
  826. [ 121.115652] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
  827. [ 121.118979] partition /media/edson/355ddedc-3d17-4f8b-88fc-6d3abb876167 [8, 20] added, comm[5969]: pool
  828. [ 121.553874] EXT4-fs (sdb2): recovery complete
  829. [ 121.601253] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
  830. [ 121.605151] partition /media/edson/c24f86d9-7de9-40b4-8b27-eff468967094 [8, 18] added, comm[5969]: pool
  831. [ 122.494140] EXT4-fs (sdb1): recovery complete
  832. [ 122.557926] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  833. [ 122.561653] partition /media/edson/166f49f1-3350-4e9f-a041-a9d290cf8581 [8, 17] added, comm[5969]: pool
  834. [ 123.389322] partition /media/edson/6E682A3F682A0705 [8, 34] added, comm[6047]: mount.ntfs
  835. [ 127.499021] usb 1-1.6: 3:1: cannot get freq at ep 0x84
  836. [ 130.312551] usb 1-1.6: 3:1: cannot get freq at ep 0x84
  837. [ 231.868139] perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
  838. [ 255.020495] perf: interrupt took too long (3156 > 3147), lowering kernel.perf_event_max_sample_rate to 63250
  839. [ 406.415626] perf: interrupt took too long (3951 > 3945), lowering kernel.perf_event_max_sample_rate to 50500
  840. [ 1035.093754] perf: interrupt took too long (5097 > 4938), lowering kernel.perf_event_max_sample_rate to 39000
  841. [ 2153.781976] perf: interrupt took too long (6376 > 6371), lowering kernel.perf_event_max_sample_rate to 31250
  842. [ 6694.454888] QThread[15988]: segfault at 0 ip 00007fd5d2174ba7 sp 00007fd5ce018a18 error 6 in libQt5Core.so.5.11.3[7fd5d213e000+2a4000]
  843. [ 6694.454898] Code: 06 b8 01 00 00 00 c3 48 83 f8 03 77 05 e9 71 fe ff ff 48 89 c7 e9 c9 00 00 00 90 0f 1f 84 00 00 00 00 00 31 c0 ba 01 00 00 00 <f0> 48 0f b1 17 75 01 c3 48 83 f8 03 77 05 e9 d6 fd ff ff 83 ce ff
  844.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!