API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 17th, 2018
326
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.61 KB | None | 0 0
raw download clone embed print report
  1. .....................
  2. Starting kernel @80000000...
  3. [ 0.000000] Linux version 4.4.74 (leks@93-78-139-78) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4496-24043a0) ) #0 Thu Jun 29 08:37:36 2017
  4. [ 0.000000] Board has DDR2
  5. [ 0.000000] Analog PMU set to hw control
  6. [ 0.000000] Digital PMU set to hw control
  7. [ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
  8. [ 0.000000] bootconsole [early0] enabled
  9. [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
  10. [ 0.000000] MIPS: machine is LAVA LR-25G001
  11. [ 0.000000] Determined physical RAM map:
  12. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  13. [ 0.000000] Initrd not found or empty - disabling initrd
  14. [ 0.000000] Zone ranges:
  15. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  20. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  21. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  23. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  24. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  27. [ 0.000000] Writing ErrCtl register=000566a0
  28. [ 0.000000] Readback ErrCtl register=000566a0
  29. [ 0.000000] Memory: 59908K/65536K available (3469K kernel code, 171K rwdata, 868K rodata, 220K init, 225K bss, 5628K reserved, 0K cma-reserved)
  30. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  31. [ 0.000000] NR_IRQS:256
  32. [ 0.000000] CPU Clock: 580MHz
  33. [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
  34. [ 0.000000] systick: enable autosleep mode
  35. [ 0.000000] systick: running - mult: 214748, shift: 32
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  37. [ 0.000009] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  38. [ 0.015452] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  39. [ 0.080598] pid_max: default: 32768 minimum: 301
  40. [ 0.089893] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.102936] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.123041] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.142522] futex hash table entries: 256 (order: -1, 3072 bytes)
  44. [ 0.154755] pinctrl core: initialized pinctrl subsystem
  45. [ 0.165729] NET: Registered protocol family 16
  46. [ 0.198982] rt2880_gpio 10000600.gpio: registering 24 gpios
  47. [ 0.209989] rt2880_gpio 10000600.gpio: registering 24 irq handlers
  48. [ 0.222504] rt2880_gpio 10000638.gpio: registering 16 gpios
  49. [ 0.233475] rt2880_gpio 10000638.gpio: registering 16 irq handlers
  50. [ 0.245967] rt2880_gpio 10000660.gpio: registering 32 gpios
  51. [ 0.256932] rt2880_gpio 10000660.gpio: registering 32 irq handlers
  52. [ 0.269435] rt2880_gpio 10000688.gpio: registering 1 gpios
  53. [ 0.280228] rt2880_gpio 10000688.gpio: registering 1 irq handlers
  54. [ 0.293410] usbcore: registered new interface driver usbfs
  55. [ 0.304293] usbcore: registered new interface driver hub
  56. [ 0.314823] usbcore: registered new device driver usb
  57. [ 0.327561] FPGA manager framework
  58. [ 0.375600] DMA-API: preallocated 65536 debug entries
  59. [ 0.385502] DMA-API: debugging enabled by kernel config
  60. [ 0.395922] clocksource: Switched to clocksource systick
  61. [ 0.407955] NET: Registered protocol family 2
  62. [ 0.417353] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  63. [ 0.431122] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  64. [ 0.443714] TCP: Hash tables configured (established 1024 bind 1024)
  65. [ 0.456434] UDP hash table entries: 256 (order: 0, 4096 bytes)
  66. [ 0.467971] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  67. [ 0.480686] NET: Registered protocol family 1
  68. [ 0.492890] rt-timer 10000100.timer: maximum frequency is 1220Hz
  69. [ 0.506029] Crashlog allocated RAM at address 0x3f00000
  70. [ 0.530879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  71. [ 0.542401] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_NONE) (c) 2001-2006 Red Hat, Inc.
  72. [ 0.568811] io scheduler noop registered (default)
  73. [ 0.578231] io scheduler deadline registered
  74. [ 0.586742] io scheduler cfq registered
  75. [ 0.594589] ralink-usb-phy usbphy: invalid resource
  76. [ 0.604836] gpio-export gpio_export: 1 gpio(s) exported
  77. [ 0.616027] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  78. [ 0.629945] console [ttyS0] disabled
  79. [ 0.636981] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
  80. [ 0.656653] console [ttyS0] enabled
  81. [ 0.656653] console [ttyS0] enabled
  82. [ 0.670472] bootconsole [early0] disabled
  83. [ 0.670472] bootconsole [early0] disabled
  84. [ 0.694370] null: module loaded
  85. [ 0.703760] spi spi0.0: force spi mode3
  86. [ 0.712077] m25p80 spi0.0: using chunked io (size=32)
  87. [ 0.722181] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  88. [ 0.732275] 4 ofpart partitions found on MTD device spi0.0
  89. [ 0.744813] Creating 4 MTD partitions on "spi0.0":
  90. [ 0.754432] 0x000000000000-0x00000000ffff : "jboot "
  91. [ 0.766110] 0x000000010000-0x00000017ffff : "kernel"
  92. [ 0.777748] 0x000000180000-0x000000feffff : "rootfs"
  93. [ 0.789364] mtd: device 3 (rootfs) set to be root filesystem
  94. [ 0.800845] 1 squashfs-split partitions found on MTD device rootfs
  95. [ 0.813173] 0x000000440000-0x000000fe0000 : "rootfs_data"
  96. [ 0.825636] 0x000000ff0000-0x000001000000 : "factory"
  97. [ 0.838384] libphy: Fixed MDIO Bus: probed
  98. [ 0.847402] arcnet: arcnet loaded
  99. [ 0.854095] Atheros(R) L2 Ethernet Driver - version 2.2.3
  100. [ 0.864885] Copyright (c) 2007 Atheros Corporation.
  101. [ 0.878979] gsw: setting port4 to ephy mode
  102. [ 0.887637] libphy: mdio: probed
  103. [ 0.896169] switch0: Atheros AR8337 rev. 2 switch registered on mdio-bus
  104. [ 1.113372] mtk_soc_eth 10100000.ethernet: using fixed link parameters
  105. [ 1.126513] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
  106. [ 1.139055] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  107. [ 1.156399] rt2880_wdt 10000120.watchdog: Initialized
  108. [ 1.168256] NET: Registered protocol family 10
  109. [ 1.181174] NET: Registered protocol family 17
  110. [ 1.190185] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  111. [ 1.215339] 8021q: 802.1Q VLAN Support v1.8
  112. [ 1.226100] console [netcon0] enabled
  113. [ 1.233391] netconsole: network logging started
  114. [ 1.259995] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  115. [ 1.275315] Freeing unused kernel memory: 220K (80469000 - 804a0000)
  116. [ 3.987102] init: Console is alive
  117. [ 3.994081] init: - watchdog -
  118. [ 6.772836] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  119. [ 6.855248] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  120. [ 6.869942] ehci-platform: EHCI generic platform driver
  121. [ 6.890791] phy phy-usbphy.0: remote usb device wakeup disabled
  122. [ 6.902591] phy phy-usbphy.0: UTMI 16bit 30MHz
  123. [ 6.911475] ehci-platform 101c0000.ehci: EHCI Host Controller
  124. [ 6.922966] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  125. [ 6.938888] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  126. [ 6.956090] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  127. [ 6.968827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  128. [ 6.982392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  129. [ 6.996790] usb usb1: Product: EHCI Host Controller
  130. [ 7.006513] usb usb1: Manufacturer: Linux 4.4.74 ehci_hcd
  131. [ 7.017272] usb usb1: SerialNumber: 101c0000.ehci
  132. [ 7.027780] hub 1-0:1.0: USB hub found
  133. [ 7.035507] hub 1-0:1.0: 1 port detected
  134. [ 7.046471] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  135. [ 7.060191] ohci-platform: OHCI generic platform driver
  136. [ 7.071010] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  137. [ 7.084602] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  138. [ 7.100486] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  139. [ 7.135127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  140. [ 7.148692] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  141. [ 7.163089] usb usb2: Product: Generic Platform OHCI controller
  142. [ 7.174887] usb usb2: Manufacturer: Linux 4.4.74 ohci_hcd
  143. [ 7.185646] usb usb2: SerialNumber: 101c1000.ohci
  144. [ 7.196178] hub 2-0:1.0: USB hub found
  145. [ 7.203996] hub 2-0:1.0: 1 port detected
  146. [ 7.219913] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  147. [ 7.238544] init: - preinit -
  148. [ 8.336480] mtk_soc_eth 10100000.ethernet eth0: port 5 link up (1000Mbps/Full duplex)
  149. [ 8.352852] 8021q: adding VLAN 0 to HW filter on device eth0
  150. Press the [f] key and hit [enter] to enter failsafe mode
  151. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  152. [ 9.596903] jffs2: notice: (412) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  153. [ 9.632087] mount_root: switching to jffs2 overlay
  154. [ 9.668740] urandom-seed: Seeding with /etc/urandom.seed
  155. [ 9.786341] mtk_soc_eth 10100000.ethernet eth0: port 5 link down
  156. [ 9.808094] procd: - early -
  157. [ 9.815376] procd: - watchdog -
  158. [ 10.246673] procd: - watchdog -
  159. [ 10.253258] procd: - ubus -
  160. [ 10.349636] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
  161. [ 10.368064] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
  162. [ 10.386043] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
  163. [ 10.407010] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
  164. [ 10.424997] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
  165. [ 10.443080] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
  166. [ 10.461183] random: ubusd: uninitialized urandom read (4 bytes read, 20 bits of entropy available)
  167. [ 10.482200] procd: - init -
  168. Please press Enter to activate this console.
  169. [ 10.888987] kmodloader: loading kernel modules from /etc/modules.d/*
  170. [ 10.971557] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  171. [ 10.999502] tun: Universal TUN/TAP device driver, 1.6
  172. [ 11.009637] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  173. [ 11.040356] ip6_tables: (C) 2000-2006 Netfilter Core Team
  174. [ 11.074777] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  175. [ 11.090799] Backport generated by backports.git backports-20160324-13-g24da7d3c
  176. [ 11.754356] ip_tables: (C) 2000-2006 Netfilter Core Team
  177. [ 11.778253] nf_conntrack version 0.5.0 (939 buckets, 3756 max)
  178. [ 11.843322] xt_time: kernel timezone is -0000
  179. [ 11.875877] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
  180. [ 11.890347] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
  181. [ 11.905795] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
  182. [ 12.014277] kmodloader: done loading kernel modules from /etc/modules.d/*
  183. [ 13.051335] random: jshn: uninitialized urandom read (4 bytes read, 24 bits of entropy available)
  184. [ 13.158930] random: ubusd: uninitialized urandom read (4 bytes read, 24 bits of entropy available)
  185. [ 13.177159] random: ubus: uninitialized urandom read (4 bytes read, 24 bits of entropy available)
  186. [ 19.351684] mtk_soc_eth 10100000.ethernet eth0: port 5 link up (1000Mbps/Full duplex)
  187. [ 19.367657] 8021q: adding VLAN 0 to HW filter on device eth0
  188. [ 19.419163] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 8021be60
  189. [ 19.440416] Oops[#1]:
  190. [ 19.444938] CPU: 0 PID: 734 Comm: netifd Not tainted 4.4.74 #0
  191. [ 19.456552] task: 838d0508 ti: 82afa000 task.ti: 82afa000
  192. [ 19.467294] $ 0 : 00000000 00000000 00000000 00000000
  193. [ 19.477708] $ 4 : 82e68000 00000001 00007004 00000004
  194. [ 19.488119] $ 8 : 00000010 80009060 00000000 00000000
  195. [ 19.498532] $12 : 00000006 77e2a2c0 00000000 00000000
  196. [ 19.508943] $16 : 82d8da00 83886000 00000000 82ad1400
  197. [ 19.519355] $20 : 00000001 00000000 77e23518 77e24d8c
  198. [ 19.529767] $24 : 00000000 80243754
  199. [ 19.540178] $28 : 82afa000 82afbd28 00000000 8021be60
  200. [ 19.550591] Hi : 00000004
  201. [ 19.556314] Lo : 9d874000
  202. [ 19.562037] epc : 00000000 (null)
  203. [ 19.569343] ra : 8021be60 ar8xxx_phy_read_status+0x164/0x198
  204. [ 19.581123] Status: 1100a403 KERNEL EXL IE
  205. [ 19.589454] Cause : 50800008 (ExcCode 02)
  206. [ 19.597427] BadVA : 00000000
  207. [ 19.603150] PrId : 00019650 (MIPS 24KEc)
  208. [ 19.611121] Modules linked in: rt2800soc rt2800pci rt2800mmio rt2800lib nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG rt2x00soc rt2x00pci rt2x00mmio rt2x00lib nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_itu_t mt7610e mt76x2e mt7603e mt76 mac80211 cfg80211 compat ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ip6_tunnel tunnel6 tun dm_crypt dm_mirror dm_region_hash dm_log dm_mod leds_gpio dwc2 ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug
  209. [ 19.754236] Process netifd (pid: 734, threadinfo=82afa000, task=838d0508, tls=77e2bd48)
  210. [ 19.770169] Stack : 83506d48 00000000 83506d48 800bf2c4 01000101 00000001 000003e8 00000000
  211. 82e68000 82afbda4 82905280 82ad1400 00000001 00000000 77e23518 77e24d8c
  212. 00000000 802437ac 8346e360 800b1f04 82afbe48 82afbe48 82f90f00 82aa9000
  213. 82aa9000 8034e764 8346e360 800b1f04 82afbe48 82f90f00 00000000 00000001
  214. 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  215. ...
  216. [ 19.840977] Call Trace:
  217. [ 19.845858] [<800bf2c4>] d_splice_alias+0x200/0x234
  218. [ 19.855595] [<802437ac>] fe_get_settings+0x58/0x78
  219. [ 19.865149] [<800b1f04>] path_put+0x18/0x2c
  220. [ 19.873509] [<8034e764>] port_cost+0x18/0x120
  221. [ 19.882183] [<800b1f04>] path_put+0x18/0x2c
  222. [ 19.890526] [<8034f028>] br_add_if+0x1b8/0x4a8
  223. [ 19.899398] [<802a081c>] dev_ifsioc+0x30c/0x330
  224. [ 19.908421] [<802a049c>] dev_load+0x18/0x8c
  225. [ 19.916760] [<800fcb64>] kernfs_dir_pos+0x70/0x168
  226. [ 19.926305] [<802a0dec>] dev_ioctl+0x5ac/0x6d4
  227. [ 19.935157] [<800fcdc4>] kernfs_fop_readdir+0x168/0x2b4
  228. [ 19.945570] [<800b9f70>] do_vfs_ioctl+0x4fc/0x5b4
  229. [ 19.954944] [<800aac44>] __fput+0x1c4/0x1ec
  230. [ 19.963275] [<800ba744>] SyS_getdents64+0x84/0x110
  231. [ 19.972819] [<800ba078>] SyS_ioctl+0x50/0x98
  232. [ 19.981335] [<8003aab4>] task_work_run+0x7c/0xa0
  233. [ 19.990541] [<800a7204>] SyS_close+0x18/0x50
  234. [ 19.999047] [<80006c2c>] syscall_common+0x30/0x54
  235. [ 20.008412]
  236. [ 20.011364]
  237. Code: (Bad address in epc)
  238. [ 20.019169]
  239. [ 20.022185] ---[ end trace 3fb2707d1fb2eeed ]---
  240. [ 20.036129] Fatal exception: panic in 5 seconds
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!