[2019-01-19 17:06:27] [Output] : ★ Namira Carter sets the toolbox onto the table, opening the draws fully
[2019-01-19 17:06:34] [Output] : ★ in order to access every part of the toolkit.      ((Namira Carter))
[2019-01-19 17:06:39] [Output] : ★ Namira Carter takes out her stanley blade as she uses it to cut the tape off
[2019-01-19 17:06:45] [Output] : ★ each CCTV camera box, opening them up.      ((Namira Carter))
[2019-01-19 17:06:51] [Output] : ★ Namira Carter slides the blade back in as she picks up a pair of wirecutters, using
[2019-01-19 17:07:03] [Output] : ★ them to remove an inch of insulation from the postive and negative wires of each camera.      ((Namira Carter))
[2019-01-19 17:07:18] [Output] : ★ Namira would be holding the wirecutters further up the wire and      ((Namira Carter))
[2019-01-19 17:07:58] [Output] : ★ using a downwards motion to strip off the insulation revealing      ((Namira Carter))
[2019-01-19 17:08:03] [Output] : ★ the copper wire underneath      ((Namira Carter))
[2019-01-19 17:08:40] [Output] : ★ Namira Carter checks that the copper is exposed enough on each camera, using the wirecutters
[2019-01-19 17:08:47] [Output] : ★ to snip off the ends of the exposed wire, sorting them out into      ((Namira Carter))
[2019-01-19 17:09:09] [Output] : ★ the correct sizes to avoid any over hang.      ((Namira Carter))
[2019-01-19 17:09:36] [Output] : ★ Namira Carter sets the wirecutters down as she then takes out a pencil jotting
[2019-01-19 17:10:22] [Output] : ★ down each IP of the CCTV cameras in order to input them onto the      ((Namira Carter))
[2019-01-19 17:10:27] [Output] : ★ server cloud of Sparta Inc alongside the CCTV software that      ((Namira Carter))
[2019-01-19 17:10:49] [Output] : ★ can be installed on mobile or PC.      ((Namira Carter))
[2019-01-19 17:11:31] [Output] : ★ Namira Carter walks over to the power box, switching off the electricity.
[2019-01-19 17:11:39] [Output] : ★ Namira Carter takes hold of the ladder as she lifts it up to rest it on one
[2019-01-19 17:11:42] [Output] : ★ of the walls, taking out her pencil as she marks on the wall      ((Namira Carter))
[2019-01-19 17:12:10] [Output] : ★ where a camera mount will sit, aligning up each mark with a ruler.      ((Namira Carter))
[2019-01-19 17:12:16] [Output] : ★ Namira Carter slides the pencil back in her pocket as she opens up the
[2019-01-19 17:12:56] [Output] : ★ drill kit, fitting a new drill head into the slot, twisting it in place.      ((Namira Carter))
[2019-01-19 17:13:00] [Output] : ★ Namira Carter walks over to the wall as she climbs up the ladder, her left hand
[2019-01-19 17:13:06] [Output] : ★ clutching the ladder.      ((Namira Carter))
[2019-01-19 17:13:16] [Output] : ★ Namira Carter leans forward as she starts to drill out the holes for the camera
[2019-01-19 17:13:21] [Output] : ★ blowing out the dust afterwards and checking they are the right depth      ((Namira Carter))
[2019-01-19 17:13:44] [Output] : ★ for the screws to fit fully.      ((Namira Carter))
[2019-01-19 17:13:49] [Output] : ★ Namira Carter then drills out another hole in the middle, accessing the internal
[2019-01-19 17:13:54] [Output] : ★ wiring of the building.      ((Namira Carter))
[2019-01-19 17:14:00] [Output] : ★ Namira Carter climbs down the ladder as she switches the drill for
[2019-01-19 17:14:04] [Output] : ★ one of the cameras, along with the four screws      ((Namira Carter))
[2019-01-19 17:14:08] [Output] : ★ that come with it, and an electric screwdriver.      ((Namira Carter))
[2019-01-19 17:14:37] [Output] : ★ Namira Carter climbs back up the ladder before aligning the camera up to the four holes in the wall.
[2019-01-19 17:14:48] [Output] : ★ Namira Carter takes one of screws as she hand screws it into the camera mount into the wall.
[2019-01-19 17:14:55] [Output] : ★ Namira Carter lets the camera hang slightly as she then takes hold of the positive
[2019-01-19 17:15:00] [Output] : ★ wire, taking hold of the wirecutters in her back pocket as she      ((Namira Carter))
[2019-01-19 17:15:10] [Output] : ★ removes part of the insulation from the positive wire of      ((Namira Carter))
[2019-01-19 17:15:14] [Output] : ★ the internal building's wiring as a connection point.      ((Namira Carter))
[2019-01-19 17:15:19] [Output] : ★ Namira Carter connects the postive wire of the camera up to the buildings
[2019-01-19 17:15:24] [Output] : ★ red power cable, twisting the copper round forming a tight connection.      ((Namira Carter))
[2019-01-19 17:15:29] [Output] : ★ Namira Carter then takes hold of the pair of wirecutters again as she carefully
[2019-01-19 17:15:35] [Output] : ★ removes part of the insulation from the negative wire revealing the copper underneath.      ((Namira Carter))
[2019-01-19 17:15:43] [Output] : ★ Namira Carter twists the negative wire of the camera around the copper exposed
[2019-01-19 17:15:49] [Output] : ★ on the internal wire of the building, ensuring the connection is tight.      ((Namira Carter))
[2019-01-19 17:15:57] [Output] : ★ Namira Carter places the Camera mount fully over the hole as she aligns it
[2019-01-19 17:16:01] [Output] : ★ up with the other three holes drilled out.      ((Namira Carter))
[2019-01-19 17:16:06] [Output] : ★ Namira Carter takes out a screw with her right hand, putting the wirecutters in her pocket.
[2019-01-19 17:16:25] [Output] : ★ Namira Carter twists the screw in place with her hand, as she then
[2019-01-19 17:16:29] [Output] : ★ twists in the other three screws afterwards doing them      ((Namira Carter))
[2019-01-19 17:16:34] [Output] : ★ as tightly as possible with her hands.      ((Namira Carter))
[2019-01-19 17:16:52] [Output] : ★ Namira Carter checks the camera is in place as she reaches behind to take the
[2019-01-19 17:17:03] [Output] : ★ screwdriver out from her left pocket, using it to fully      ((Namira Carter))
[2019-01-19 17:17:08] [Output] : ★ tighten up the screws in place holding the camera.      ((Namira Carter))
[2019-01-19 17:17:19] [Output] : ★ Namira Carter aligns the camera head up so it has a clear view of the area,
[2019-01-19 17:17:30] [Output] : ★ putting the screwdriver back in her back pocket as she climbs back down.      ((Namira Carter))
[2019-01-19 17:17:37] [Output] : ★ Namira Carter lifts the ladder with both hands, moving it to the other side of the room.
[2019-01-19 17:17:52] [Output] : ★ Namira Carter picks up the drill, checking the head is properly connected as she climbs up the ladder after.
[2019-01-19 17:17:59] [Output] : ★ Namira Carter grips the ladder with her left hand, holding herself steady as
[2019-01-19 17:18:05] [Output] : ★ she drills out four holes for the camera mount, before      ((Namira Carter))
[2019-01-19 17:18:10] [Output] : ★ drilling out another hole in the middle in order to access the internal wiring.      ((Namira Carter))
[2019-01-19 17:18:16] [Output] : ★ Namira Carter climbs down the ladder as she puts the drill down, picking up another CCTV camera
[2019-01-19 17:18:31] [Output] : ★ as well as the small bag of screws that come with it.      ((Namira Carter))
[2019-01-19 17:18:40] [Output] : ★ Namira Carter climbs up the ladder as she then uses wirecutters to adjust the wires
[2019-01-19 17:18:44] [Output] : ★ inside the wall in order to form connection points for the camera itself      ((Namira Carter))
[2019-01-19 17:18:55] [Output] : ★ Namira Carter connects up the positive and negative wires of the camera to the
[2019-01-19 17:20:19] [Output] : ★ corresponding wires in the wall, checking that the wires are      ((Namira Carter))
[2019-01-19 17:20:25] [Output] : ★ firmly connected as she makes additional adjustments with      ((Namira Carter))
[2019-01-19 17:20:30] [Output] : ★ the wirecutters in order to prevent any overhang.      ((Namira Carter))
[2019-01-19 17:20:35] [Output] : ★ Namira Carter holds the camera in place over the four holes that are drilled
[2019-01-19 17:20:47] [Output] : ★ out as she places each screw through the camera mount hole into      ((Namira Carter))
[2019-01-19 17:20:52] [Output] : ★ the holes drilled out in the wall, using her hand to tighten them      ((Namira Carter))
[2019-01-19 17:20:59] [Output] : ★ before letting go of the camera.      ((Namira Carter))
[2019-01-19 17:21:08] [Output] : ★ Namira Carter reaches for her screwdriver as she then uses a clockwise motion to tighten each screw in place.
[2019-01-19 17:22:12] [Output] : ★ Namira Carter makes her way back down the ladder, opening up
[2019-01-19 17:22:17] [Output] : ★ a bottle of water as she takes a drink, setting it down afterwards.      ((Namira Carter))
[2019-01-19 17:22:22] [Output] : ★ Namira Carter takes hold of the drill again as she pulls herself up the ladder
[2019-01-19 17:22:27] [Output] : ★ drilling out for holes in a square as she then drills out the      ((Namira Carter))
[2019-01-19 17:22:32] [Output] : ★ middle creating a bigger hole between the four to access the wiring.      ((Namira Carter))
[2019-01-19 17:22:59] [Output] : ★ Namira Carter climbs down the ladder half way, placing the drill on a cabinet
[2019-01-19 17:23:05] [Output] : ★ as she then climbs back up, using wirecutters to strip some`      ((Namira Carter))
[2019-01-19 17:23:11] [Output] : ★ of the insulation of the internal wiring in order to make wire connections.      ((Namira Carter))
[2019-01-19 17:23:15] [Output] : ★ Namira Carter gets off the ladder as she picks up another camera, snipping off
[2019-01-19 17:23:19] [Output] : ★ part of the wiring in order to make them shorter.      ((Namira Carter))
[2019-01-19 17:23:32] [Output] : ★ Namira Carter gets up the ladder as she connects the cameras wires to
[2019-01-19 17:23:41] [Output] : ★ the buildings internal wire, connecting the red power      ((Namira Carter))
[2019-01-19 17:24:01] [Output] : ★ wire of the camera to the buildings power cable and      ((Namira Carter))
[2019-01-19 17:24:05] [Output] : ★ then negative wire to the negative wire of the building.      ((Namira Carter))
[2019-01-19 17:24:57] [Output] : ★ Namira Carter uses her left hand to hold the camera in place as she
[2019-01-19 17:25:01] [Output] : ★ inserts screws through each hole in the mount directly      ((Namira Carter))
[2019-01-19 17:25:06] [Output] : ★ into the wall, using a screwdriver to tighten them up.      ((Namira Carter))
[2019-01-19 17:25:17] [Output] : ★ Namira Carter aligns the camera up in order for it to have a full view without anything blocking it.
[2019-01-19 17:25:39] [Output] : ★ Namira Carter climbs down the ladder, stretching afterwards as she then
[2019-01-19 17:25:43] [Output] : ★ takes hold of the ladder moving it to above the door.      ((Namira Carter))
[2019-01-19 17:25:51] [Output] : ★ Namira Carter walks over to her equipment as she takes out one of the alarm panels
[2019-01-19 17:25:55] [Output] : ★ along with one motion sensors.      ((Namira Carter))
[2019-01-19 17:26:00] [Output] : ★ Namira Carter uses a screwdriver to open up the back of the alarm panel and sensor
[2019-01-19 17:26:05] [Output] : ★ inserting a lithium battery into each of the battery compartments      ((Namira Carter))
[2019-01-19 17:26:09] [Output] : ★ in order for a battery backup system.      ((Namira Carter))
[2019-01-19 17:26:23] [Output] : ★ Namira Carter picks up the drill as she climbs up the ladder, using the drill to
[2019-01-19 17:26:31] [Output] : ★ drill two holes adjacent to each other vertically for the alarm panel to      ((Namira Carter))
[2019-01-19 17:26:43] [Output] : ★ be fitted, as she then drills into the wall for the buildings wiring.      ((Namira Carter))
[2019-01-19 17:26:47] [Output] : ★ Namira Carter sets the drill down after climbing off the ladder, taking hold of the alarm panel.
[2019-01-19 17:26:52] [Output] : ★ Namira Carter climbs up the ladder as she then uses wirecutters to snip part of the alarm's
[2019-01-19 17:27:16] [Output] : ★ wiring to make it shorter as she then connects it up to the buildings      ((Namira Carter))
[2019-01-19 17:27:20] [Output] : ★ power wire and negative cable, twisting the copper wire of      ((Namira Carter))
[2019-01-19 17:27:25] [Output] : ★ the alarm panal's wires around the correct wires, tightening the connections up.      ((Namira Carter))
[2019-01-19 17:27:31] [Output] : ★ Namira Carter moves the alarm over the two holes aligning them up as she
[2019-01-19 17:27:36] [Output] : ★ inserts a screw into the top hole, rotating it clockwise with her hand      ((Namira Carter))
[2019-01-19 17:28:00] [Output] : ★ as she then does the same with the bottom screw until it can't move any further.      ((Namira Carter))
[2019-01-19 17:28:11] [Output] : ★ Namira Carter takes the screwdriver from her back pocket as she does up the screws
[2019-01-19 17:28:19] [Output] : ★ even further, fully tightening them.      ((Namira Carter))
[2019-01-19 17:28:29] [Output] : ★ Namira Carter climbs down the ladder as she then takes hold of a motion sensor
[2019-01-19 17:28:39] [Output] : ★ placing it above the door as she screws it into place, leaving the wires of it dangling.      ((Namira Carter))
[2019-01-19 17:28:46] [Output] : ★ Namira Carter checks the sensor is in place properly as she then takes hold of
[2019-01-19 17:28:55] [Output] : ★ the wires stripping the ends from insulation to reveal the copper underneath the insulation.      ((Namira Carter))
[2019-01-19 17:29:19] [Output] : ★ Namira Carter takes hold of the motion sensor power wires (red & Black) as
[2019-01-19 17:29:26] [Output] : ★ she connects it to the output of the alarm panal above checking the connection.      ((Namira Carter))
[2019-01-19 17:30:16] [Output] : ★ Namira Carter then takes hold of the signal wires of the sensor
[2019-01-19 17:30:22] [Output] : ★ connecting it to the GND on the alarm panel and      ((Namira Carter))
[2019-01-19 17:30:38] [Output] : ★ also to one of the input pins on the right side of the board.      ((Namira Carter))
[2019-01-19 17:30:45] [Output] : ★ Namira Carter adjusts the settings on the panel, setting it so that the
[2019-01-19 17:30:53] [Output] : ★ sensor activates the alarm if it detects heat waves/motion when alarm activates.      ((Namira Carter))
[2019-01-19 17:31:01] [Output] : ★ Alarm System would be activated when the building is locked up      ((Namira Carter))
[2019-01-19 17:31:10] [Output] : ★ as the sensor comes with a remote to turn it on and aligns with the keypad.      ((Namira Carter))
[2019-01-19 17:31:16] [Output] : ★ Motion Sensor would cover the front area of the building.      ((Namira Carter))
[2019-01-19 17:31:34] [Output] : ★ Namira Carter takes hold of the keypad that comes with the kit, turning it on its front as she
[2019-01-19 17:31:48] [Output] : ★ inserts a lithium battery as a battery back up before screwing the keypad to      ((Namira Carter))
[2019-01-19 17:31:51] [Output] : ★ the wall      ((Namira Carter))
[2019-01-19 17:32:19] [Output] : ★ Namira Carter takes hold of the keypads three wires, one being a connection wire, one being power
[2019-01-19 17:32:25] [Output] : ★ and the other a black negative wire.      ((Namira Carter))
[2019-01-19 17:32:52] [Output] : ★ Namira Carter strips the insultation as she then inserts the connection wire into the alarm panel connection
[2019-01-19 17:33:21] [Output] : ★ checking its in properly as she tightens up the screw to join the connection up.      ((Namira Carter))
[2019-01-19 17:37:20] [Output] : ★ Namira Carter takes hold of the keypads alarm cable as she joins it to the power supply on the panel, checking
[2019-01-19 17:37:34] [Output] : ★ that its connected properly as she then hooks up the negative wire up the panel as well.      ((Namira Carter))
[2019-01-19 17:38:44] [Output] : ★ Namira Carter walks back over to her equipment as she takes out a
[2019-01-19 17:38:48] [Output] : ★ wireless CCTV IP camera, noting down its IP on a pad before      ((Namira Carter))
[2019-01-19 17:38:54] [Output] : ★ unlatching the back of it, placing a lithium battery inside.      ((Namira Carter))
[2019-01-19 17:39:00] [Output] : ★ Namira Carter takes hold of the ladder as she lifts it into a different area of
[2019-01-19 17:39:05] [Output] : ★ the building, setting it against the wall.      ((Namira Carter))
[2019-01-19 17:39:15] [Output] : ★ Namira Carter climbs up the ladder as she fits the camera mount onto the wall
[2019-01-19 17:39:26] [Output] : ★ using an electric screwdriver to screw its connection screws into place.      ((Namira Carter))
[2019-01-19 17:39:32] [Output] : ★ Namira Carter aligns the camera head so it has full view of the area in front of it.
[2019-01-19 17:39:36] [Output] : ★ The lithium battery would power it for 3 years before requiring to be changed.      ((Namira Carter))
[2019-01-19 17:39:41] [Output] : ★ Namira Carter climbs down from the ladder as she then takes another drink,
[2019-01-19 17:39:45] [Output] : ★ picking up another wireless IP camera afterwards as she      ((Namira Carter))
[2019-01-19 17:39:50] [Output] : ★ uses a small flathead screwdriver to lift the battery latch up.      ((Namira Carter))
[2019-01-19 17:39:54] [Output] : ★ Namira Carter slots in a lithium battery as she then closes the latch.
[2019-01-19 17:40:06] [Output] : ★ Namira Carter walks over to ladder as she moves it to the other side
[2019-01-19 17:40:23] [Output] : ★ climbing up half way as she positions the camera onto the      ((Namira Carter))
[2019-01-19 17:40:29] [Output] : ★ wall checking for the right position that would enable it      ((Namira Carter))
[2019-01-19 17:40:33] [Output] : ★ to cover most of the room.      ((Namira Carter))
[2019-01-19 17:40:37] [Output] : ★ Namira Carter takes hold of the electric screwdriver, using it to turn
[2019-01-19 17:40:44] [Output] : ★ the screws that are loosely in the camera mount as she fits it to the wall      ((Namira Carter))
[2019-01-19 17:40:55] [Output] : ★ Namira Carter adjusts the head of the camera once more before climbing down the ladder fully.
[2019-01-19 17:41:09] [Output] : ★ Namira Carter walks back to the power mains box as she flicks the power back on.
[2019-01-19 17:42:35] [Output] : ★ Namira Carter walks into the office as she sets up the NVR under the desk, hooking it up tot he PC.
[2019-01-19 17:42:57] [Output] : ★ Namira Carter logs into the CCTV software as she inputs each IP into the system, setting it to
[2019-01-19 17:43:09] [Output] : ★ run backups every 24 hours onto the NVR 2TB harddrive.      ((Namira Carter))
[