API tools faq
paste
Advertisement
Guest User

FAP221B initramfs uart

a guest
Dec 24th, 2022
55
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.22 KB | None | 0 0
raw download clone embed print report
  1. ## Booting image at 9f940000 ...
  2. Image Name: MIPS OpenWrt Linux-5.10.146
  3. Created: 2022-10-14 22:44:41 UTC
  4. Image Type: MIPS Linux Kernel Image (lzma compressed)
  5. Data Size: 5206004 Bytes = 5 MB
  6. Load Address: 80060000
  7. Entry Point: 80060000
  8. Verifying Checksum at 0x9f940040 ...OK
  9. Uncompressing Kernel Image ... OK
  10.  
  11. Starting kernel ...
  12.  
  13. [ 0.000000] Linux version 5.10.146 (stereo@oberon) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Fri Oct 14 22:44:2
  14. [ 0.000000] printk: bootconsole [early0] enabled
  15. [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
  16. [ 0.000000] MIPS: machine is Fortinet FAP221B
  17. [ 0.000000] SoC: Atheros AR9344 rev 2
  18. [ 0.000000] Initrd not found or empty - disabling initrd
  19. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  20. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  21. [ 0.000000] Zone ranges:
  22. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  23. [ 0.000000] Movable zone start for each node
  24. [ 0.000000] Early memory node ranges
  25. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  26. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  27. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
  28. [ 0.000000] Kernel command line: console=ttyS0,9600n8 rootfstype=squashfs,jffs2
  29. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  30. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
  31. [ 0.000000] Writing ErrCtl register=00000000
  32. [ 0.000000] Readback ErrCtl register=00000000
  33. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  34. [ 0.000000] Memory: 47228K/65536K available (5462K kernel code, 602K rwdata, 1196K rodata, 10140K init, 200K bss, 18308K reserved, 0K cma-reserved)
  35. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  36. [ 0.000000] NR_IRQS: 51
  37. [ 0.000000] CPU clock: 560.000 MHz
  38. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
  39. [ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
  40. [ 0.092489] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
  41. [ 0.237110] pid_max: default: 32768 minimum: 301
  42. [ 0.292347] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  43. [ 0.379480] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  44. [ 0.474050] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  45. [ 0.568184] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  46. [ 0.685467] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  47. [ 0.766530] pinctrl core: initialized pinctrl subsystem
  48. [ 0.830388] NET: Registered protocol family 16
  49. [ 0.943147] clocksource: Switched to clocksource MIPS
  50. [ 1.004520] NET: Registered protocol family 2
  51. [ 1.056704] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  52. [ 1.143605] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  53. [ 1.243342] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  54. [ 1.334712] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
  55. [ 1.418776] TCP: Hash tables configured (established 1024 bind 1024)
  56. [ 1.494700] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  57. [ 1.572574] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  58. [ 1.655887] NET: Registered protocol family 1
  59. [ 1.707891] PCI: CLS 0 bytes, default 32
  60. [ 1.924525] workingset: timestamp_bits=14 max_order=14 bucket_order=0
  61. [ 2.005942] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  62. [ 2.075500] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  63. [ 2.196087] pinctrl-single 1804002c.pinmux: 544 pins, size 68
  64. [ 2.265587] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  65. [ 2.342190] printk: console [ttyS0] disabled
  66. [ 2.393178] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
  67. [ 2.495936] printk: console [ttyS0] enabled
  68. [ 2.495936] printk: console [ttyS0] enabled
  69. [ 2.596147] printk: bootconsole [early0] disabled
  70. [ 2.596147] printk: bootconsole [early0] disabled
  71. [ 2.720181] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
  72. [ 2.781941] 4 fixed-partitions partitions found on MTD device spi0.0
  73. [ 2.858221] Creating 4 MTD partitions on "spi0.0":
  74. [ 2.915687] 0x000000000000-0x000000040000 : "u-boot"
  75. [ 2.979162] 0x000000040000-0x000000940000 : "rootfs"
  76. [ 3.039743] mtd: device 1 (rootfs) set to be root filesystem
  77. [ 3.108610] 1 squashfs-split partitions found on MTD device rootfs
  78. [ 3.182792] 0x000000350000-0x000000940000 : "rootfs_data"
  79. [ 3.249356] 0x000000940000-0x000000ff0000 : "kernel"
  80. [ 3.309958] 0x000000ff0000-0x000001000000 : "art"
  81. [ 3.376885] ag71xx 19000000.eth: invalid MAC address, using random address
  82. [ 3.893712] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd072, driver=Qualcomm Atheros AR8035]
  83. [ 4.013421] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
  84. [ 4.087837] i2c /dev entries driver
  85. [ 4.131075] NET: Registered protocol family 10
  86. [ 4.189607] Segment Routing with IPv6
  87. [ 4.233734] NET: Registered protocol family 17
  88. [ 4.287186] 8021q: 802.1Q VLAN Support v1.8
  89. [ 4.338397] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
  90. [ 4.411588] MEM 0x0000000010000000..0x0000000013ffffff
  91. [ 4.474231] IO 0x0000000000000000..0x0000000000000000
  92. [ 4.537127] PCI host bridge to bus 0000:00
  93. [ 4.586293] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  94. [ 4.668779] pci_bus 0000:00: root bus resource [io 0x0000]
  95. [ 4.735653] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  96. [ 4.817121] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  97. [ 4.912213] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
  98. [ 4.984279] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
  99. [ 5.065762] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  100. [ 5.146221] pci 0000:00:00.0: supports D1
  101. [ 5.194241] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  102. [ 5.264303] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  103. [ 5.343675] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
  104. [ 5.431385] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
  105. [ 5.562998] Freeing unused kernel memory: 10140K
  106. [ 5.618421] This architecture does not have kernel memory protection.
  107. [ 5.695723] Run /init as init process
  108. [ 6.216779] init: Console is alive
  109. [ 6.258126] init: - watchdog -
  110. [ 6.318985] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  111. [ 6.407425] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  112. [ 6.504583] init: - preinit -
  113. [ 6.890133] random: jshn: uninitialized urandom read (4 bytes read)
  114. [ 7.149509] random: jshn: uninitialized urandom read (4 bytes read)
  115. [ 7.271175] random: jshn: uninitialized urandom read (4 bytes read)
  116. Press the [f] key and hit [enter] to enter failsafe mode
  117. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  118. [ 11.775612] procd: - early -
  119. [ 11.810500] procd: - watchdog -
  120. [ 12.430854] procd: - watchdog -
  121. [ 12.470083] procd: - ubus -
  122. [ 12.513636] random: ubusd: uninitialized urandom read (4 bytes read)
  123. [ 12.592296] random: ubusd: uninitialized urandom read (4 bytes read)
  124. [ 12.669145] random: ubusd: uninitialized urandom read (4 bytes read)
  125. [ 12.749583] procd: - init -
  126. Please press Enter to activate this console.
  127. [ 13.559145] random: ubusd: uninitialized urandom read (4 bytes read)
  128. [ 13.677873] kmodloader: loading kernel modules from /etc/modules.d/*
  129. [ 13.803402] random: ubus: uninitialized urandom read (4 bytes read)
  130. [ 14.246584] random: jsonfilter: uninitialized urandom read (4 bytes read)
  131. [ 14.380870] urngd: v1.0.2 started.
  132. [ 14.589923] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
  133. [ 14.680839] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
  134. [ 14.796359] random: crng init done
  135. [ 14.837200] random: 24 urandom warning(s) missed due to ratelimiting
  136. [ 15.066128] PPP generic driver version 2.4.2
  137. [ 15.121435] NET: Registered protocol family 24
  138. [ 15.226717] ath9k 18100000.wmac: Direct firmware load for ath9k-eeprom-ahb-18100000.wmac.bin failed with error -2
  139. [ 15.349949] ath9k 18100000.wmac: Falling back to sysfs fallback for: ath9k-eeprom-ahb-18100000.wmac.bin
  140. [ 15.629180] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12
  141. [ 15.708931] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
  142. [ 15.779828] ath9k 0000:00:00.0: Direct firmware load for ath9k-eeprom-pci-0000:00:00.0.bin failed with error -2
  143. [ 15.900966] ath9k 0000:00:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:00:00.0.bin
  144. [ 16.951145] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xb0000000, irq=14
  145. [ 17.132931] kmodloader: done loading kernel modules from /etc/modules.d/*
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!