API tools faq
paste
Guest User

dmesg.txt

a guest
Jul 24th, 2018
764
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 68.00 KB | None | 0 0
raw download clone embed print report
  1. -----------------------------------------------------dmesg.txt-----------------------------------------------------------------
  2. [ 0.000000@0] Initializing cgroup subsys cpuset
  3. [ 0.000000@0] Initializing cgroup subsys cpu
  4. [ 0.000000@0] Initializing cgroup subsys cpuacct
  5. [ 0.000000@0] Linux version 3.14.29 (kszaq@cvm) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP Sat Jan 6 18:53:48 CET 2018
  6. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  7. [ 0.000000@0] no prop version_code
  8. [ 0.000000@0] bootconsole [earlycon0] enabled
  9. [ 0.000000@0] fdt Reserved memory table:
  10. [ 0.000000@0] linux,di: 0x000000007d300000 - 0x000000007f100000 (30 MiB)
  11. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007d300000, size 30 MiB
  12. [ 0.000000@0] linux,ion-dev: 0x0000000079300000 - 0x000000007d300000 (64 MiB)
  13. [ 0.000000@0] linux,vdin1_cma: 0x0000000078000000 - 0x0000000079000000 (16 MiB)
  14. [ 0.000000@0] cma: Reserved 16 MiB at 78000000, total cma pages:4096
  15. [ 0.000000@0] linux,ppmgr: 0x0000000079300000 - 0x0000000079300000 (0 MiB)
  16. [ 0.000000@0] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB)
  17. [ 0.000000@0] cma: Reserved 192 MiB at 67c00000, total cma pages:53248
  18. [ 0.000000@0] linux,picdec: 0x0000000079300000 - 0x0000000079300000 (0 MiB)
  19. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  20. [ 0.000000@0] linux,codec_mm_reserved: 0x0000000073f00000 - 0x0000000078000000 (65 MiB)
  21. [ 0.000000@0] fdt Reserved memory total: 371 MiB
  22. [ 0.000000@0] cma: Reserved 8 MiB at 67400000, total cma pages:55296
  23. [ 0.000000@0] On node 0 totalpages: 519168
  24. [ 0.000000@0] Normal zone: 11176 pages used for memmap
  25. [ 0.000000@0] Normal zone: 0 pages reserved
  26. [ 0.000000@0] Normal zone: 519168 pages, LIFO batch:31
  27. [ 0.000000@0] psci: probing function IDs from device-tree
  28. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07926c000 s17216 r8192 d23744 u49152
  29. [ 0.000000@0] pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
  30. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  31. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 507992
  32. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=8 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 pq= androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=d6:f1:4d:fa:7c:d9 androidboot.mac=d6:f1:4d:fa:7c:d9 androidboot.slot_suffix=_a bootfromext console=tty0 systemd.show_status=auto noswap
  33. [ 0.000000@0] logo: osd1
  34. [ 0.000000@0] logo: loaded
  35. [ 0.000000@0] logo: 0x3d800000
  36. [ 0.000000@0] logo: 1080p60hz
  37. [ 0.000000@0] vout_serve: 1080p60hz
  38. [ 0.000000@0] vout_serve: en: 1
  39. [ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz
  40. [ 0.000000@0] vout_serve: 1080p60hz
  41. [ 0.000000@0] vout_serve: enable: 1
  42. [ 0.000000@0] logo: get hdmimode: 1080p60hz
  43. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  44. [ 0.000000@0] tv_vout: cvbs performance line = 0
  45. [ 0.000000@0] [amvecm] pq string error !!!
  46. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  47. [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  48. [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  49. [ 0.000000@0] Memory: 1625992K/2076672K available (6745K kernel code, 722K rwdata, 2496K rodata, 904K init, 2919K bss, 450680K reserved)
  50. [ 0.000000@0] Virtual kernel memory layout:
  51. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  52. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042bbd800 ( 43 MB)
  53. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  54. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07f100000 ( 2033 MB)
  55. [ 0.000000@0] .init : 0xffffffc001988000 - 0xffffffc001a6a340 ( 905 kB)
  56. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001987744 ( 9246 kB)
  57. [ 0.000000@0] .data : 0xffffffc001a6b000 - 0xffffffc001b1fa10 ( 723 kB)
  58. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01986fff]
  59. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1
  60. [ 0.000000@0] arch_multi_cluster:1
  61. [ 0.000000@0] Hierarchical RCU implementation.
  62. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  63. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  64. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  65. [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  66. [ 0.008247@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffffff8000016994
  67. [ 0.016795@0] Console: colour dummy device 80x25
  68. [ 0.021087@0] console [tty0] enabled
  69. [ 0.024672@0] bootconsole [earlycon0] disabled
  70. [ 0.032587@0] allocated 8388608 bytes of page_cgroup
  71. [ 0.032597@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  72. [ 0.032623@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  73. [ 0.032641@0] pid_max: default: 32768 minimum: 301
  74. [ 0.032778@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  75. [ 0.032791@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  76. [ 0.038483@0] Initializing cgroup subsys memory
  77. [ 0.038524@0] Initializing cgroup subsys devices
  78. [ 0.038535@0] Initializing cgroup subsys freezer
  79. [ 0.038545@0] Initializing cgroup subsys blkio
  80. [ 0.038596@0] ftrace: allocating 23499 entries in 92 pages
  81. [ 0.067012@0] /cpus/cpu@0: Missing clock-frequency property
  82. [ 0.067038@0] /cpus/cpu@1: Missing clock-frequency property
  83. [ 0.067049@0] /cpus/cpu@2: Missing clock-frequency property
  84. [ 0.067061@0] /cpus/cpu@3: Missing clock-frequency property
  85. [ 0.067072@0] /cpus/cpu@100: Missing clock-frequency property
  86. [ 0.067085@0] /cpus/cpu@101: Missing clock-frequency property
  87. [ 0.067099@0] /cpus/cpu@102: Missing clock-frequency property
  88. [ 0.067113@0] /cpus/cpu@103: Missing clock-frequency property
  89. [ 0.067780@0] Meson chip version = RevA (22:A - 82:0)
  90. [ 0.068232@1] CPU1: Booted secondary processor
  91. [ 0.068648@2] CPU2: Booted secondary processor
  92. [ 0.069017@3] CPU3: Booted secondary processor
  93. [ 0.069391@4] CPU4: Booted secondary processor
  94. [ 0.069811@5] CPU5: Booted secondary processor
  95. [ 0.070192@6] CPU6: Booted secondary processor
  96. [ 0.070578@7] CPU7: Booted secondary processor
  97. [ 0.070667@0] Brought up 8 CPUs
  98. [ 0.070731@0] SMP: Total of 8 processors activated.
  99. [ 0.071289@0] devtmpfs: initialized
  100. [ 0.078256@2] sched: registering cpufreq notifiers for scale-invariant loads
  101. [ 0.078301@2] instabooting: 0
  102. [ 0.087774@0] cma: cma_init_reserved_areas, use_cma_first:1
  103. [ 0.087873@0] pinctrl core: initialized pinctrl subsystem
  104. [ 0.088503@2] regulator-dummy: no parameters
  105. [ 0.089281@0] NET: Registered protocol family 16
  106. [ 0.090802@2] ramoops: using module parameters
  107. [ 0.091319@2] pstore: Registered ramoops as persistent store backend
  108. [ 0.091340@2] ramoops: attached 0x100000@0x7300000, ecc: 0/0
  109. [ 0.092142@0] aml_vdac_init: module init
  110. [ 0.092290@3] register canvas platform driver
  111. [ 0.092366@0] register rdma platform driver
  112. [ 0.093711@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001a74000
  113. [ 0.094183@0] DMA: preallocated 256 KiB pool for atomic allocations
  114. [ 0.095959@0] software IO TLB [mem 0x62c00000-0x63000000] (4MB) mapped at [ffffffc062c00000-ffffffc062ffffff]
  115. [ 0.096407@2] aml_i2c version: 20140813
  116. [ 0.096618@2] i2c-core: driver [pmu4] using legacy resume method
  117. [ 0.096692@3] codec_mm:codec_mm_module_init
  118. [ 0.097038@0] gxbb_mpll_clk: register mpll_clk_out0 success done
  119. [ 0.097053@0] gxbb_mpll_clk: register mpll_clk_out1 success done
  120. [ 0.097065@0] gxbb_mpll_clk: register mpll_clk_out2 success done
  121. [ 0.097281@0] clk_sys: register PLL sys_pll success done
  122. [ 0.097302@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
  123. [ 0.097312@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
  124. [ 0.097322@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
  125. [ 0.097331@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
  126. [ 0.097340@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
  127. [ 0.097349@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
  128. [ 0.097358@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
  129. [ 0.097366@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
  130. [ 0.097375@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
  131. [ 0.097408@0] gxl_clk: clock initialization complete
  132. [ 0.097601@0] clkmsr: Gxl msr_clk_reg0=ffffff800003c75c,msr_clk_reg2=ffffff800003e764
  133. [ 0.099993@3] aml_iomap: amlogic iomap probe done
  134. [ 0.100530@2] pinmux-gxl c1109880.pinmux: Init pinux probe!
  135. [ 0.101394@2] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  136. [ 0.101855@2] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  137. [ 0.101885@2] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  138. [ 0.102031@2] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  139. [ 0.102053@2] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  140. [ 0.104313@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
  141. [ 0.104326@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
  142. [ 0.104336@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
  143. [ 0.104346@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
  144. [ 0.104355@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
  145. [ 0.104365@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000
  146. [ 0.104374@0] dvfs [scpi_dvfs_get_opps] - buf.opp[6].freq_hz = 1512000000
  147. [ 0.104384@0] dvfs [scpi_dvfs_get_opps] - new count 7, max_freq 1512000000
  148. [ 0.106542@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
  149. [ 0.106554@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
  150. [ 0.106563@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
  151. [ 0.106573@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
  152. [ 0.106582@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
  153. [ 0.106591@0] dvfs [scpi_dvfs_get_opps] - new count 5, max_freq 1000000000
  154. [ 0.108455@0] codec_mm has 2 memory regions
  155. [ 0.108510@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  156. [ 0.108530@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  157. [ 0.108630@2] codec_mm has 2 memory regions
  158. [ 0.108649@2] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  159. [ 0.108666@2] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  160. [ 0.110558@0] vpu: driver version: v03
  161. [ 0.110605@0] vpu: load vpu_clk: 666667000Hz(7)
  162. [ 0.110695@2] vpu: vpu_probe OK
  163. [ 0.111996@0] tv_vout: tvout_probe
  164. [ 0.112019@0] tv_vout: chrdev devno 265289728 for disp
  165. [ 0.112028@0] vout_notify: vout_register_server
  166. [ 0.112036@0] tv_vout: register tv module server ok
  167. [ 0.112282@3] tv_vout: create cdev tv
  168. [ 0.112297@3] tv_vout: tvout_probe OK
  169. [ 0.112785@3] canvas_probe reg=00000000c8838000,size=400
  170. [ 0.112820@3] canvas maped reg_base =ffffff800009a000
  171. [ 0.116569@2] rdma_probe
  172. [ 0.337656@0] bio: create slab <bio-0> at 0
  173. [ 0.338636@1] SCSI subsystem initialized
  174. [ 0.339165@2] usbcore: registered new interface driver usbfs
  175. [ 0.339269@0] usbcore: registered new interface driver hub
  176. [ 0.339403@1] usbcore: registered new device driver usb
  177. [ 0.340161@3] i2c-gpio i2c_gpio.40: using pins 172 (SDA) and 173 (SCL)
  178. [ 0.340349@1] pps_core: LinuxPPS API ver. 1 registered
  179. [ 0.340363@1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  180. [ 0.340429@2] PTP clock support registered
  181. [ 0.340952@3] hdmitx: system: amhdmitx_init
  182. [ 0.340967@3] hdmitx: system: Ver: 2014May6
  183. [ 0.341157@3] hdmitx: system: amhdmitx_probe
  184. [ 0.341485@2] hdmitx: system: not find match init-data
  185. [ 0.341503@2] hdmitx hpd irq = 89
  186. [ 0.342057@1] hdmitx20: Mapped PHY: 0xc0800000
  187. [ 0.342085@1] hdmitx20: Mapped PHY: 0xc1104400
  188. [ 0.342110@1] hdmitx20: Mapped PHY: 0xc8100000
  189. [ 0.342120@1] hdmitx20: Mapped PHY: 0xc8834000
  190. [ 0.342128@1] hdmitx20: Mapped PHY: 0xc883a000
  191. [ 0.342137@1] hdmitx20: Mapped PHY: 0xc883c000
  192. [ 0.342149@1] hdmitx20: Mapped PHY: 0xd0100000
  193. [ 0.342159@1] hdmitx20: Mapped PHY: 0xda83a000
  194. [ 0.342174@1] hdmitx: alread display in uboot 0x10
  195. [ 0.342216@1] avmute set to 1
  196. [ 0.342649@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
  197. [ 0.342667@2] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  198. [ 0.342686@2] tv_vout: already display in uboot
  199. [ 0.342695@2] vout_serve: vinfo mode is: 1080p60hz
  200. [ 0.342703@2] vout_serve: init mode 1080p60hz
  201. [ 0.342940@3] vout_serve: create_vout_fops OK
  202. [ 0.342952@3] vout_serve: create vout attribute OK
  203. [ 0.342960@3] vout_serve: meson_vout_probe OK
  204. [ 0.343140@1] logo: logo_init
  205. [ 0.343398@1] osd_rdma: osd_rdma_init: rdma_table p=0x67441000,op=0x67441000 , v=0xffffff800009e000
  206. [ 0.343432@1] rdma_register, rdma_table_addr ffffff80000a9000 rdma_table_addr_phy 67442000 reg_buf ffffffc062923000
  207. [ 0.343445@1] rdma_register success, handle 1 table_size 4096
  208. [ 0.343454@1] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
  209. [ 0.343478@1] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 67443000 reg_buf ffffffc062922000
  210. [ 0.343491@1] rdma_register success, handle 2 table_size 4096
  211. [ 0.343500@1] osd_rdma: osd_rdma_init:osd rdma handle = 2.
  212. [ 0.343893@2] Advanced Linux Sound Architecture Driver Initialized.
  213. [ 0.346110@2] Switched to clocksource arch_sys_counter
  214. [ 0.349264@0] hdmitx: system: irq 80000002
  215. [ 0.355813@2] FS-Cache: Loaded
  216. [ 0.364484@3] NET: Registered protocol family 2
  217. [ 0.364930@3] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  218. [ 0.365055@3] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  219. [ 0.365294@3] TCP: Hash tables configured (established 16384 bind 16384)
  220. [ 0.365398@3] TCP: reno registered
  221. [ 0.365414@3] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  222. [ 0.365463@3] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  223. [ 0.365724@3] NET: Registered protocol family 1
  224. [ 0.366328@1] pwm: probe ok
  225. [ 0.366623@1] wifi: power_on_pin_OD = 0;
  226. [ 0.366642@1] aml_wifi wifi.35: [wifi_dev_probe] no power_on_pin2
  227. [ 0.366682@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm phandle val=31;pwm-channel1=4;pwm-channel2=12
  228. [ 0.366697@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
  229. [ 0.366710@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
  230. [ 0.366723@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
  231. [ 0.366735@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
  232. [ 0.366748@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
  233. [ 0.366760@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
  234. [ 0.366772@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] wifi pwm dt ok
  235. [ 0.366799@1] aml_wifi wifi.35: [pwm_double_channel_conf] wifi pwm conf ok
  236. [ 0.366855@1] aml_wifi wifi.35: [wifi_dev_probe] dhd_static_buf setup
  237. [ 0.366924@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
  238. [ 0.366939@1] aml_wifi wifi.35: [wifi_dev_probe] interrupt_pin=241
  239. [ 0.366949@1] aml_wifi wifi.35: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  240. [ 0.366962@1] aml_wifi wifi.35: [wifi_dev_probe] power_on_pin=240
  241. [ 0.366973@1] aml_wifi wifi.35: [wifi_dev_probe] clock_32k_pin=0
  242. [ 0.367241@2] aml_wifi wifi.35: [wifi_setup_dt] wifi_setup_dt
  243. [ 0.367285@2] aml_wifi wifi.35: [wifi_setup_dt] interrupt_pin(241)
  244. [ 0.367305@2] aml_wifi wifi.35: [wifi_setup_dt] power_on_pin(240)
  245. [ 0.367500@1] Unpacking initramfs...
  246. [ 0.421787@1] Freeing initrd memory: 1996K (ffffffc073cad000 - ffffffc073ea0000)
  247. [ 0.424778@2] futex hash table entries: 2048 (order: 5, 131072 bytes)
  248. [ 0.433911@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  249. [ 0.434382@1] msgmni has been set to 3611
  250. [ 0.435468@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  251. [ 0.435581@3] io scheduler noop registered
  252. [ 0.435590@3] io scheduler deadline registered
  253. [ 0.435620@3] io scheduler cfq registered (default)
  254. [ 0.436559@2] meson-rng c8834000.rng: hwrng registered
  255. [ 0.440304@3] loop: module loaded
  256. [ 0.442158@3] tun: Universal TUN/TAP device driver, 1.6
  257. [ 0.442182@3] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  258. [ 0.566201@1] libphy: stmmac: probed
  259. [ 0.566225@1] eth0: No PHY found
  260. [ 0.626196@0] stmmac_pltfr_probe: main driver probe failed
  261. [ 0.626709@0] PPP generic driver version 2.4.2
  262. [ 0.627023@3] NET: Registered protocol family 24
  263. [ 0.627159@0] usbcore: registered new interface driver smsc95xx
  264. [ 0.627538@1] platform c9000000.dwc3: Driver dwc3 requests probe deferral
  265. [ 0.627675@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  266. [ 0.627688@3] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  267. [ 0.627917@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  268. [ 0.628234@3] usbcore: registered new interface driver usb-storage
  269. [ 0.628461@1] usbcore: registered new interface driver usbserial
  270. [ 0.628552@3] usbcore: registered new interface driver usbserial_generic
  271. [ 0.628639@0] usbserial: USB Serial support registered for generic
  272. [ 0.628725@1] usbcore: registered new interface driver pl2303
  273. [ 0.628816@3] usbserial: USB Serial support registered for pl2303
  274. [ 0.629355@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000fa000
  275. [ 0.629603@3] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  276. [ 0.629673@3] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fc080
  277. [ 0.630013@1] mousedev: PS/2 mouse device common for all mice
  278. [ 0.630239@0] i2c /dev entries driver
  279. [ 0.631096@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
  280. [ 0.633347@0] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
  281. [ 0.634609@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
  282. [ 0.635042@0] ledtrig-cpu: registered to indicate activity on CPUs
  283. [ 0.635205@3] hidraw: raw HID events driver (C) Jiri Kosina
  284. [ 0.637282@3] usbcore: registered new interface driver usbhid
  285. [ 0.637303@3] usbhid: USB HID core driver
  286. [ 0.637498@0] ashmem: initialized
  287. [ 0.637879@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fe4c0
  288. [ 0.637915@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  289. [ 0.637937@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  290. [ 0.686185@2] hdmitx: plugin
  291. [ 0.740990@2] EDID Parser:
  292. [ 0.741283@2] hdmitx: get dtd0 vic: 16
  293. [ 0.741287@2] dump_dtd_info[1762]
  294. [ 0.741289@2] pixel_clock 8550
  295. [ 0.741290@2] h_active 1360
  296. [ 0.741291@2] h_blank 432
  297. [ 0.741292@2] v_active 768
  298. [ 0.741293@2] v_blank 27
  299. [ 0.741294@2] h_sync_offset 64
  300. [ 0.741295@2] h_sync 112
  301. [ 0.741296@2] v_sync_offset 3
  302. [ 0.741297@2] v_sync 6
  303. [ 0.741313@2] hdmitx: get dtd1 vic: 4
  304. [ 0.741315@2] hdmitx: edid: find IEEEOUT
  305. [ 0.741319@2] hdmitx: edid: check sum valid
  306. [ 0.741320@2] hdmitx: edid: check sum valid
  307. [ 0.741323@2] hdmitx: update RX hdr info 0
  308. [ 0.741327@2] hdmitx: edid: check sum valid
  309. [ 0.741328@2] hdmitx: edid: check sum valid
  310. [ 0.741330@2] hdmitx: edid: blk0 raw data
  311. [ 0.741361@2] 00ffffffffffff004c2d6906010000002f130103801009780aee91a3544c9926
  312. [ 0.741361@2] 0f5054bdef80714f8100814081809500950fb300a940023a801871382d40582c
  313. [ 0.741361@2] 4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd0018
  314. [ 0.741361@2] 4b1a5117000a202020202020000000fc0053414d53554e470a20202020200127
  315. [ 0.741361@2]
  316. [ 0.741361@2]
  317. [ 0.741362@2] hdmitx: edid: blk1 raw data
  318. [ 0.741392@2] 020327f14b901f0413051403122021222309070783010000e2000fe305030167
  319. [ 0.741392@2] 030c002000b82d011d007251d01e206e285500a05a0000001e011d00bc52d01e
  320. [ 0.741392@2] 20b8285540a05a0000001e011d8018711c1620582c2500a05a0000009e011d80
  321. [ 0.741392@2] d0721c1620102c2580a05a0000009e000000000000000000000000000000000d
  322. [ 0.741392@2]
  323. [ 0.741392@2]
  324. [ 0.741415@2] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
  325. [ 0.741421@2] hdmitx: video: get current mode: 1080p60hz
  326. [ 0.741423@2] hdmitx: update rx hdr info 0
  327. [ 0.741424@2] hdmitx: update physcial size: 160 90
  328. [ 0.741441@2] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  329. [ 0.741447@2] hdmtix: set audio
  330. [ 0.741456@2] hdmitx tx_aud_src = 0
  331. [ 0.741480@2] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
  332. [ 0.741482@2] hdmitx aud_n_para = 6144
  333. [ 0.741499@2] hdmitx set channel status
  334. [ 2.466309@0] console [ttyS0] enabled
  335. [ 2.470350@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800010a4c0
  336. [ 2.477027@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  337. [ 2.487016@1] meson-gpu-clkgen c883c000.gpu_clk: can't request region for resource [mem 0xc883c000-0xc883cfff]
  338. [ 2.496239@1] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error -16
  339. [ 2.503718@0] hdmitx: system: hdmitx_hdcp_init
  340. [ 2.508544@1] aml_vrtc rtc.34: rtc core: registered aml_vrtc as rtc0
  341. [ 2.514372@0] secmon has 1 memory regions
  342. [ 2.518214@0] secmon: share in base: 0xffffff800011c000, share out base: 0xffffff800011e000
  343. [ 2.526448@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
  344. [ 2.533404@0] secmon: probe done
  345. [ 2.536965@0] storage: storage in base: 0xffffff8001800000
  346. [ 2.542013@0] storage: storage out base: 0xffffff8001880000
  347. [ 2.547560@0] storage: storage block base: 0xffffff8001900000
  348. [ 2.553250@0] storage: probe done!
  349. [ 2.557116@0] aml_sd_emmc_probe: line 3594
  350. [ 2.560645@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  351. [ 2.571758@0] aml_sd_emmc_reg_init 1149
  352. [ 2.573990@0] get property: ocr_avail, value:0x00200080
  353. [ 2.580327@0] get property: f_min, value:300000
  354. [ 2.586475@0] get property: f_max, value:100000000
  355. [ 2.592816@0] get property: max_req_size, value:0x00020000
  356. [ 2.599310@0] get property: pinname, str:emmc
  357. [ 2.605065@0] get property: card_type, value:1
  358. [ 2.610771@0] get property: gpio_dat3, str:
  359. [ 2.616210@0] get property: hw_reset, str:
  360. [ 2.621647@0] emmc:pdata->caps = c0000d47
  361. [ 2.625594@0] emmc:pdata->caps2 = 18060
  362. [ 2.629391@0] emmc:pdata->pm_caps = 0
  363. [ 2.633032@0] storage 1, boot 1
  364. [ 2.636118@0] get_storage_dev return 1
  365. [ 2.676117@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  366. [ 2.676344@1] aml_sd_emmc_probe: line 3594
  367. [ 2.680806@1] aml_sd_emmc_reg_init 1149
  368. [ 2.684214@1] get property: ocr_avail, value:0x00200080
  369. [ 2.690644@1] get property: f_min, value:400000
  370. [ 2.696761@1] get property: f_max, value:100000000
  371. [ 2.703138@1] get property: max_req_size, value:0x00020000
  372. [ 2.709618@1] get property: irq_in, value:3
  373. [ 2.715299@1] get property: irq_out, value:5
  374. [ 2.721006@1] get property: gpio_cd, str:
  375. [ 2.726431@1] get property: pinname, str:sd
  376. [ 2.732033@1] get property: jtag_pin, str:
  377. [ 2.737472@1] get property: card_type, value:5
  378. [ 2.743158@1] get property: card_in_delay, value:400
  379. [ 2.749029@1] get property: gpio_dat3, str:
  380. [ 2.754468@1] sd:pdata->caps = 7
  381. [ 2.757653@1] sd:pdata->caps2 = 0
  382. [ 2.760271@3] emmc: BKOPS_EN bit is not set
  383. [ 2.765065@1] sd:pdata->pm_caps = 0
  384. [ 2.766704@3] emmc: trying cali 0-th time(s)
  385. [ 2.775441@3] emmc: delay[0]= 4400 padding= 3, bidx=4
  386. [ 2.777753@3] emmc: delay[1]= 4400 padding= 3, bidx=4
  387. [ 2.782746@3] emmc: delay[2]= 4200 padding= 4, bidx=4
  388. [ 2.787757@3] emmc: delay[3]= 4600 padding= 2, bidx=4
  389. [ 2.792751@3] emmc: delay[4]= 4400 padding= 3, bidx=4
  390. [ 2.797758@3] emmc: delay[5]= 4400 padding= 3, bidx=4
  391. [ 2.802756@3] emmc: delay[6]= 4400 padding= 3, bidx=4
  392. [ 2.806259@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  393. [ 2.806289@0] aml_sd_emmc_probe: line 3594
  394. [ 2.806667@0] aml_sd_emmc_reg_init 1149
  395. [ 2.806723@0] get property: ocr_avail, value:0x00200080
  396. [ 2.806725@0] get property: f_min, value:400000
  397. [ 2.806728@0] get property: f_max, value:200000000
  398. [ 2.806730@0] get property: max_req_size, value:0x00020000
  399. [ 2.806735@0] get property: pinname, str:sdio
  400. [ 2.806739@0] get property: card_type, value:3
  401. [ 2.806764@0] sdio:pdata->caps = 78107
  402. [ 2.806766@0] sdio:pdata->caps2 = 0
  403. [ 2.806769@0] sdio:pdata->pm_caps = 1
  404. [ 2.846118@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  405. [ 2.846426@2] ion_dev has 1 memory regions
  406. [ 2.864678@2] fb: osd_init_module
  407. [ 2.864791@2] fb: viu vsync irq: 35
  408. [ 2.864797@2] fb: failed to init reserved memory
  409. [ 2.864811@2] fb: osd_probe vinfo:ffffffc001ad1f28
  410. [ 2.864816@2] fb: init fbdev bpp is:32
  411. [ 2.898678@3] emmc: delay[7]= 4600 padding= 2, bidx=4
  412. [ 2.903671@3] emmc: calibration result @ 0: max(4600), min(4200)
  413. [ 2.903679@3] emmc: line_delay =0x1110211, max_cal_result =4600
  414. [ 2.903681@3] emmc: base_index_max 4, base_index_min 4
  415. [ 2.903687@3] emmc: clk 100000000 SDR mode tuning start
  416. [ 2.904199@3] emmc: rx_tuning_result[0] = 10
  417. [ 2.904626@3] emmc: rx_tuning_result[1] = 10
  418. [ 2.905053@3] emmc: rx_tuning_result[2] = 10
  419. [ 2.905482@3] emmc: rx_tuning_result[3] = 10
  420. [ 2.905909@3] emmc: rx_tuning_result[4] = 10
  421. [ 2.906346@3] emmc: rx_tuning_result[5] = 10
  422. [ 2.906775@3] emmc: rx_tuning_result[6] = 10
  423. [ 2.907202@3] emmc: rx_tuning_result[7] = 10
  424. [ 2.907630@3] emmc: rx_tuning_result[8] = 10
  425. [ 2.907676@3] emmc: best_win_start =0, best_win_size =9
  426. [ 2.907679@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x42000
  427. [ 2.907682@3] emmc: gclock =0x100024a, gdelay=0x1110211, gadjust=0x42000
  428. [ 2.907860@3] emmc: support driver strength type 1
  429. [ 2.907941@3] emmc: try set sd/emmc to DDR mode
  430. [ 2.907944@3] emmc: try set sd/emmc to DDR mode
  431. [ 2.908100@3] emmc: new HS400 MMC card at address 0001
  432. [ 2.908537@0] emmc: clock 100000000, 8-bit-bus-width
  433. [ 2.908537@0]
  434. [ 2.908538@0] mmcblk0: emmc:0001 AWPD3R 14.5 GiB
  435. [ 2.908680@0] mmcblk0boot0: emmc:0001 AWPD3R partition 1 4.00 MiB
  436. [ 2.908815@0] mmcblk0boot1: emmc:0001 AWPD3R partition 2 4.00 MiB
  437. [ 2.908952@0] mmcblk0rpmb: emmc:0001 AWPD3R partition 3 4.00 MiB
  438. [ 2.909752@3] mmcblk0: unknown partition table
  439. [ 2.910564@0] [mmc_read_partition_tbl] mmc read partition OK!
  440. [ 2.910565@0] add_emmc_partition
  441. [ 2.910784@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  442. [ 2.910927@0] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  443. [ 2.911052@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  444. [ 2.911182@0] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  445. [ 2.911311@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  446. [ 2.911450@0] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  447. [ 2.911570@3] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  448. [ 2.911691@0] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  449. [ 2.911844@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  450. [ 2.911968@0] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  451. [ 2.912098@3] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
  452. [ 2.912223@0] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
  453. [ 2.912342@3] [mmcblk0p13] data offset 0x0000b7400000, size 0x0002eca00000
  454. [ 2.912371@3] card key: card_blk_probe.
  455. [ 2.912375@3] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
  456. [ 2.912377@3] emmc key: emmc_key_init:552 ok.
  457. [ 2.915161@3] amlmmc_dtb_init: register dtb chardev
  458. [ 2.915161@3] calc f699e619, store f699e619
  459. [ 2.917715@3] calc f699e619, store f699e619
  460. [ 2.917716@3] total valid 2
  461. [ 2.918179@0] amlmmc_dtb_init: register dtb chardev OK
  462. [ 2.918179@0] Exit aml_emmc_partition_ops OK.
  463. [ 2.920268@3] mmcblk0boot1: unknown partition table
  464. [ 2.921185@3] mmcblk0boot0: unknown partition table
  465. [ 2.921426@0] clear_emmc_wait_flag
  466. [ 3.206405@4] [aml_is_card_insert] card OUT
  467. [ 3.210832@1] fb: set osd0 reverse as NONE
  468. [ 3.215654@0] fb: osd probe OK
  469. [ 3.218082@0] ge2d: ge2d_init_module
  470. [ 3.221336@0] ge2d: ge2d_dev major:241
  471. [ 3.225436@2] ge2d: ge2d clock is 400 MHZ
  472. [ 3.229016@2] ge2d: ge2d: pdev=ffffffc00033ce00, irq=182, rstc=0xffffffc0626f6640, clk=ffffffc0002fca00
  473. [ 3.238363@2] ge2d: mapped phy: 0xd0160000
  474. [ 3.242376@2] ge2d: ge2d start monitor
  475. [ 3.246146@1] ge2d: ge2d workqueue monitor start
  476. [ 3.246509@0] codec:Amlogic A/V streaming port init
  477. [ 3.247961@2] codec:get gate demux control ok ffffffc0626ff1c0
  478. [ 3.247966@2] codec:get gate parser_top control ok ffffffc0626ff240
  479. [ 3.247969@2] codec:get gate vpu_intr control ok ffffffc0626ff2c0
  480. [ 3.247975@2] codec:get gate vdec control ok ffffffc0626ff340
  481. [ 3.248707@2] codec:[tsync_pcr_init]init success.
  482. [ 3.248833@2] codec:amvideocap_probe,amvideocap
  483. [ 3.248837@2] codec:use cma buf.
  484. [ 3.250877@2] codec:vdec_request_irq ffffffc0015406f0, vsync
  485. [ 3.251095@0] codec:create_ge2d_work_queue video task ok
  486. [ 3.302779@6] rdma_register, rdma_table_addr ffffff8000256000 rdma_table_addr_phy 67450000 reg_buf ffffffc062058000
  487. [ 3.312784@6] rdma_register success, handle 3 table_size 32768
  488. [ 3.318539@6] video_rdma:rdma_init video rdma handle = 3.
  489. [ 3.323928@1] codec:used fix clk for vdec clk source!
  490. [ 3.328894@1] codec:register clk_set_setting cpu[34]
  491. [ 3.334553@1] DI: di_module_init ok.
  492. [ 3.337346@1] DI: di_module_init: major 237
  493. [ 3.341676@0] DI: di_probe
  494. [ 3.344318@1] deinterlace has 1 memory regions
  495. [ 3.348585@1] DI: di reveser memory 0x7d300000, size 30MB.
  496. [ 3.348595@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
  497. [ 3.356143@1] DI-di_probe: get flag_cma error.
  498. [ 3.360554@1] di_irq:78,timerc_irq:38
  499. [ 3.364297@1] rdma_register, rdma_table_addr ffffff800017d000 rdma_table_addr_phy 6744a000 reg_buf ffffffc0627d6000
  500. [ 3.374517@1] rdma_register success, handle 4 table_size 8192
  501. [ 3.380205@1] DI: di_probe allocate rdma channel 4.
  502. [ 3.385031@1] DI: DI hw version 2.
  503. [ 3.388406@1] 0x000000db:Y=db,U=0,V=0
  504. [ 3.392016@1] 0x000000dc:Y=dc,U=0,V=0
  505. [ 3.395638@1] 0x000000dd:Y=dd,U=0,V=0
  506. [ 3.399266@1] 0x000000de:Y=de,U=0,V=0
  507. [ 3.402883@1] 0x000000df:Y=df,U=0,V=0
  508. [ 3.406510@1] 0x000000e0:Y=e0,U=0,V=0
  509. [ 3.410128@1] 0x000000e1:Y=e1,U=0,V=0
  510. [ 3.413751@1] 0x000000e2:Y=e2,U=0,V=0
  511. [ 3.417378@1] 0x000000e3:Y=e3,U=0,V=0
  512. [ 3.420996@1] 0x000000f0:Y=f0,U=0,V=0
  513. [ 3.424621@1] 0x000000f1:Y=f1,U=0,V=0
  514. [ 3.428246@1] 0x000000f2:Y=f2,U=0,V=0
  515. [ 3.431863@1] 0x000000f3:Y=f3,U=0,V=0
  516. [ 3.435486@1] 0x000000f4:Y=f4,U=0,V=0
  517. [ 3.439113@1] 0x000000f5:Y=f5,U=0,V=0
  518. [ 3.442731@1] 0x000000f6:Y=f6,U=0,V=0
  519. [ 3.446359@1] 0x000000f7:Y=f7,U=0,V=0
  520. [ 3.449976@1] 0x000000f8:Y=f8,U=0,V=0
  521. [ 3.453598@1] 0x000000f9:Y=f9,U=0,V=0
  522. [ 3.457226@1] 0x000000fa:Y=fa,U=0,V=0
  523. [ 3.460843@1] 0x000000fb:Y=fb,U=0,V=0
  524. [ 3.464466@1] 0x000000fc:Y=fc,U=0,V=0
  525. [ 3.468587@1] efusekeynum: 4
  526. [ 3.470942@1] efusekeyname: mac offset: 0 size: 6
  527. [ 3.477347@1] efusekeyname: mac_bt offset: 6 size: 6
  528. [ 3.483703@1] efusekeyname: mac_wifi offset: 12 size: 6
  529. [ 3.490101@1] efusekeyname: usid offset: 18 size: 16
  530. [ 3.496790@1] efuse efuse.10: probe OK!
  531. [ 3.500604@1] key unify config unifykey-num is 14
  532. [ 3.504962@1] key unify fact unifykey-num is 14
  533. [ 3.509429@1] aml_unifykeys_probe:1280=============unifykey_devno:eb00000
  534. [ 3.516458@1] 6unifykey: device unifykeys created ok
  535. [ 3.521257@1] 6aml_unifykeys_init done!
  536. [ 3.525014@1] PPMGRDRV: warn: ppmgr module init func called
  537. [ 3.530683@1] PPMGRDRV: err: ppmgr_driver_probe called
  538. [ 3.535623@1] ppmgr has 1 memory regions
  539. [ 3.539547@1] PPMGRDRV: info: ppmgr_dev major:234
  540. [ 3.544465@1] PPMGRDRV: info: ppmgr_probe done
  541. [ 3.548997@2] amlogic rfkill init
  542. [ 3.551945@2] enter bt_probe of_node
  543. [ 3.555386@2] not get gpio_en
  544. [ 3.558318@2] power on valid level is high
  545. [ 3.562188@2] bt: power_on_pin_OD = 0;
  546. [ 3.606514@5] [aml_is_card_insert] card OUT
  547. [ 3.987686@2] audio_dsp: [dsp]register dsp to char divece(257)
  548. [ 3.995034@0] amaudio: amaudio: driver amaudio succuess!
  549. [ 3.995925@1] vdin_drv_init: major 233
  550. [ 4.001313@0] rdma_register, rdma_table_addr ffffff8000189000 rdma_table_addr_phy 6744c000 reg_buf ffffffc062b5b000
  551. [ 4.009080@0] rdma_register success, handle 5 table_size 512
  552. [ 4.014516@0] vdin_drv_probe:vdin.0 rdma hanld 5.
  553. [ 4.021239@0]
  554. [ 4.021239@0] vdin memory resource undefined!!
  555. [ 4.025307@0] vdin0 cma_mem_size = 16 MB
  556. [ 4.029522@0] vdin0 irq: 115 rdma irq: 2
  557. [ 4.033546@0] vdin_drv_probe: fclk_div5 is 400 MHZ
  558. [ 4.038012@0] vdin_drv_probe: vdin[0] clock is 50 MHZ
  559. [ 4.044330@1] vdin_drv_probe: driver initialized ok
  560. [ 4.048611@1] rdma_register, rdma_table_addr ffffff800018b000 rdma_table_addr_phy 6744d000 reg_buf ffffffc06210d200
  561. [ 4.058215@1] rdma_register success, handle 6 table_size 512
  562. [ 4.063592@1] vdin_drv_probe:vdin.1 rdma hanld 6.
  563. [ 4.069763@0] vdin1 has 1 memory regions
  564. [ 4.072140@0] vdin vdin1.28: assigned reserved memory node linux,vdin1_cma ok
  565. [ 4.079211@0]
  566. [ 4.079211@0] vdin memory resource done.
  567. [ 4.084849@0] vdin1 cma_mem_size = 16 MB
  568. [ 4.088689@0] vdin1 irq: 117 rdma irq: 4
  569. [ 4.092639@0] vdin_drv_probe: fclk_div5 is 400 MHZ
  570. [ 4.097312@0] vdin_drv_probe: vdin[1] clock is 50 MHZ
  571. [ 4.102724@0] vdin_drv_probe: driver initialized ok
  572. [ 4.107473@1] vdin_drv_init: vdin driver init done
  573. [ 4.111876@1] tvafe_drv_init: major 232
  574. [ 4.116313@1] tvafe: tvafe_init.
  575. [ 4.119317@2] [RX]-hdmirx: hdmirx_init.
  576. [ 4.122652@2] ESM HLD: Initializing...
  577. [ 4.126383@2] ESM HLD: Registering device range 'esm_rx'...
  578. [ 4.131890@2] ESM HLD: Device range 'esm_rx' has been registered.
  579. [ 4.137935@2] ESM HLD: Creating class /sys/class/elliptic_rx...
  580. [ 4.143943@2] ESM HLD: The class /sys/class/elliptic_rx has been created.
  581. [ 4.150519@2] ESM HLD: Creating device 'esm_rx'...
  582. [ 4.155597@1] ESM HLD: Device 'esm_rx' has been created.
  583. [ 4.160559@1] ESM HLD: Done initializing the HLD driver.
  584. [ 4.165775@1] module init
  585. [ 4.168879@1]
  586. [ 4.168879@1] VECM probe start
  587. [ 4.173963@2] dolby_vision_init_receiver(dvel)
  588. [ 4.177556@2] dolby_vision_init_receiver: dvel
  589. [ 4.181903@2] aml_vecm_probe: ok
  590. [ 4.185903@2] saradc c1108680.saradc: initialized by BL30
  591. [ 4.190473@2] saradc c1108680.saradc: calibration start:
  592. [ 4.195751@2] saradc c1108680.saradc: nominal=0, value=6
  593. [ 4.201034@2] saradc c1108680.saradc: nominal=256, value=232
  594. [ 4.206630@2] saradc c1108680.saradc: nominal=512, value=461
  595. [ 4.212223@2] saradc c1108680.saradc: nominal=768, value=690
  596. [ 4.217838@2] saradc c1108680.saradc: nominal=1023, value=920
  597. [ 4.223478@2] saradc c1108680.saradc: calibration end: coef=4578
  598. [ 4.229879@2] remote: Driver init
  599. [ 4.232871@2] remote: platform_data g_remote_ao_offset=580
  600. [ 4.238177@2] remote: platform_data irq =228
  601. [ 4.242457@2] remote: set drvdata completed
  602. [ 4.246627@2] remote: device_create_file completed
  603. [ 4.252124@2] input: aml_keypad as /devices/meson-remote.12/input/input0
  604. [ 4.258854@2] remote: input_register_device completed
  605. [ 4.263440@2] remote: set_remote_mode[78]
  606. [ 4.267392@2] remote: remote config major:229
  607. [ 4.272117@1] remote: physical address:0x62124000
  608. [ 4.276973@2] gpio-key gpio_keypad.50: gpio_key: 0 name(power) pin()
  609. [ 4.282645@2] gpio-key gpio_keypad.50: amlogic_gpio_name_map_num pin 0!::
  610. [ 4.289446@2] gpio-key gpio_keypad.50: gpio_key: 0 power(147)
  611. [ 4.295110@2] gpio-key gpio_keypad.50: start setup_timer
  612. [ 4.300336@2] gpio-key gpio_keypad.50: power key(116) registed.
  613. [ 4.306541@2] input: gpio_keypad as /devices/gpio_keypad.50/input/input1
  614. [ 4.313076@1] gpio-key gpio_keypad.50: gpio keypad register input device completed.
  615. [ 4.320469@1] input input1: gpio keypad major:228
  616. [ 4.325649@1] cpuinfo: probe done
  617. [ 4.329746@2] input: cec_input as /devices/virtual/input/input2
  618. [ 4.334652@2] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  619. [ 4.340376@2] cectx aocec: aml_cec_probe(): no hhi reg resource
  620. [ 4.346372@2] cectx aocec: aml_cec_probe(): can't find hdmirx
  621. [ 4.353050@2] cec: wake up flag:0
  622. [ 4.357426@2] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  623. [ 4.364054@1] aml-i2s-dai I2S.42: I2S Mic is in platform!
  624. [ 4.368003@2] aml_pcm_dai: pcm mode detection =1
  625. [ 4.396168@2] input input1: key 116 up
  626. [ 4.577743@2] aml_snd_card: headphone detection disable=1
  627. [ 4.577967@2] aml_snd_card: no spk event delay time set
  628. [ 4.587492@2] aml_snd_m8_card aml_m8_snd.49: T9015-audio-hifi <-> I2S.42 mapping ok
  629. [ 4.593930@2] aml_snd_m8_card aml_m8_snd.49: dit-hifi <-> SPDIF.43 mapping ok
  630. [ 4.598020@2] aml_pcm: enter aml_pcm_new dai->name: PCM.44 dai->id: 0
  631. [ 4.605131@2] aml_snd_m8_card aml_m8_snd.49: pcm2bt-pcm <-> PCM.44 mapping ok
  632. [ 4.611296@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTL
  633. [ 4.618621@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  634. [ 4.627415@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTR
  635. [ 4.634938@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  636. [ 4.657863@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
  637. [ 4.660852@3] TCP: cubic registered
  638. [ 4.668850@1] NET: Registered protocol family 10
  639. [ 4.669807@1] NET: Registered protocol family 17
  640. [ 4.672482@1] Key type dns_resolver registered
  641. [ 4.678367@1] Registering SWP/SWPB emulation handler
  642. [ 4.684478@1] regulator-dummy: disabling
  643. [ 5.391622@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  644. [ 5.391953@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  645. [ 5.402849@1] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
  646. [ 5.406676@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  647. [ 5.412505@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  648. [ 5.419954@1] usb usb1: Product: xHCI Host Controller
  649. [ 5.424829@1] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
  650. [ 5.430601@1] usb usb1: SerialNumber: xhci-hcd.0.auto
  651. [ 5.439311@1] hub 1-0:1.0: USB hub found
  652. [ 5.439647@1] hub 1-0:1.0: 3 ports detected
  653. [ 5.445131@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  654. [ 5.449331@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  655. [ 5.457980@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  656. [ 5.463738@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  657. [ 5.471046@1] usb usb2: Product: xHCI Host Controller
  658. [ 5.476024@1] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
  659. [ 5.481642@1] usb usb2: SerialNumber: xhci-hcd.0.auto
  660. [ 5.487732@3] hub 2-0:1.0: USB hub found
  661. [ 5.490544@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  662. [ 5.498887@5] console [netcon0] enabled
  663. [ 5.501558@5] netconsole: network logging started
  664. [ 5.506351@5] aml_vrtc rtc.34: setting system clock to 2015-01-01 00:00:12 UTC (1420070412)
  665. [ 5.518479@5] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
  666. [ 5.520708@5] gxbb_pm: enter meson_pm_probe!
  667. [ 5.524418@5] gxbb_pm: meson_pm_probe done
  668. [ 5.530453@5] cpucore_cooling_register, max_cpu_core_num:4
  669. [ 5.534174@5] cpucore_cooling_register, max_cpu_core_num:4
  670. [ 5.555553@5] aml_istbt_dev_ready NULL
  671. [ 5.555700@5] ALSA device list:
  672. [ 5.556865@5] #0: AML-M8AUDIO
  673. [ 5.561466@5] Freeing unused kernel memory: 904K (ffffffc001988000 - ffffffc001a6a000)
  674. [ 5.627667@2] fb: use ion buffer for fb memory
  675. [ 5.628740@2] meson-fb meson-fb.16: create ion_client ffffffc00035a0c0, handle=ffffffc062099a40
  676. [ 5.628761@2] meson-fb meson-fb.16: ion memory(0): created fb at 0x0000000079300000, size 24 MiB
  677. [ 5.628771@2] fb: Frame buffer memory assigned at
  678. [ 5.628783@2] fb: 0, phy: 0x0000000079300000, vir:0xffffff8001cf5000, size=24900K
  679. [ 5.628783@2]
  680. [ 5.628799@2] fb: ---------------clear fb0 memory ffffff8001cf5000
  681. [ 5.649994@2] fb: osd[0] canvas.idx =0x40
  682. [ 5.650010@2] fb: osd[0] canvas.addr=0x79300000
  683. [ 5.650020@2] fb: osd[0] canvas.width=7680
  684. [ 5.650029@2] fb: osd[0] canvas.height=3240
  685. [ 5.650038@2] fb: osd[0] frame.width=1920
  686. [ 5.650047@2] fb: osd[0] frame.height=1080
  687. [ 5.665778@0] fb: osd[0] canvas.idx =0x40
  688. [ 5.665782@0] fb: osd[0] canvas.addr=0x79300000
  689. [ 5.665785@0] fb: osd[0] canvas.width=7680
  690. [ 5.665788@0] fb: osd[0] canvas.height=2160
  691. [ 5.665791@0] fb: osd[0] frame.width=1920
  692. [ 5.665794@0] fb: osd[0] frame.height=1080
  693. [ 5.685333@0] fb: use ion buffer for fb memory
  694. [ 5.685457@0] meson-fb meson-fb.16: create ion_client ffffffc00035a0c0, handle=ffffffc0628eaa40
  695. [ 5.685470@0] meson-fb meson-fb.16: ion memory(1): created fb at 0x000000007ab51000, size 1 MiB
  696. [ 5.685478@0] fb: Frame buffer memory assigned at
  697. [ 5.685488@0] fb: 1, phy: 0x000000007ab51000, vir:0xffffff8003547000, size=1024K
  698. [ 5.685488@0]
  699. [ 5.685500@0] fb: fb1 open, logo index:1
  700. [ 5.715987@7] codec:free_alloced_keep_buffer (null). (null). (null)
  701. [ 5.716498@7] vfm_map_store:rm default
  702. [ 5.716498@7]
  703. [ 5.716736@7] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  704. [ 5.716736@7]
  705. [ 5.717056@7] fb: osd[0] enable: 1 (platform_init)
  706. [ 5.732644@7] fb: osd[1] enable: 0 (platform_init)
  707. [ 5.766258@4] usb 1-2: new high-speed USB device number 2 using xhci-hcd
  708. [ 5.782385@1] Console: switching to colour frame buffer device 240x67
  709. [ 5.820555@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  710. [ 5.920784@3] dwc_otg: Core Release: 3.10a
  711. [ 5.920797@3] dwc_otg: Setting default values for core params
  712. [ 5.920816@3] dwc_otg: curmode: 0, host_only: 0
  713. [ 5.933067@3] dwc_otg: Using Buffer DMA mode
  714. [ 5.933075@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  715. [ 5.933081@3] dwc_otg: Working on port type = SLAVE
  716. [ 5.933089@3] dwc_otg: Dedicated Tx FIFOs mode
  717. [ 6.236206@4] usb 1-2: new high-speed USB device number 3 using xhci-hcd
  718. [ 6.474328@4] usb 1-2: New USB device found, idVendor=0930, idProduct=6545
  719. [ 6.474338@4] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  720. [ 6.474345@4] usb 1-2: Product: DataTraveler 3.0
  721. [ 6.474352@4] usb 1-2: Manufacturer: Kingston
  722. [ 6.474359@4] usb 1-2: SerialNumber: 60A44C413C8CEEA129850094
  723. [ 6.476055@5] usb-storage 1-2:1.0: USB Mass Storage device detected
  724. [ 6.476446@5] scsi0 : usb-storage 1-2:1.0
  725. [ 7.564828@5] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
  726. [ 8.826155@4] usb 1-1: new high-speed USB device number 4 using xhci-hcd
  727. [ 8.927556@6] sd 0:0:0:0: [sda] 30497664 512-byte logical blocks: (15.6 GB/14.5 GiB)
  728. [ 8.927723@6] sd 0:0:0:0: [sda] Write Protect is off
  729. [ 8.927733@6] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  730. [ 8.927889@6] sd 0:0:0:0: [sda] No Caching mode page found
  731. [ 8.927896@6] sd 0:0:0:0: [sda] Assuming drive cache: write through
  732. [ 8.929850@6] sd 0:0:0:0: [sda] No Caching mode page found
  733. [ 8.929863@6] sd 0:0:0:0: [sda] Assuming drive cache: write through
  734. [ 8.955225@6] sda: sda1 sda2
  735. [ 8.957054@6] sd 0:0:0:0: [sda] No Caching mode page found
  736. [ 8.957067@6] sd 0:0:0:0: [sda] Assuming drive cache: write through
  737. [ 8.957079@6] sd 0:0:0:0: [sda] Attached SCSI removable disk
  738. [ 8.968402@7] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
  739. [ 8.968412@7] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  740. [ 8.968419@7] usb 1-1: Product: USB2.0 Hub
  741. [ 8.968426@7] usb 1-1: Manufacturer: GenesysLogic
  742. [ 8.977531@7] hub 1-1:1.0: USB hub found
  743. [ 8.977801@7] hub 1-1:1.0: 4 ports detected
  744. [ 9.286352@4] usb 1-1.4: new high-speed USB device number 5 using xhci-hcd
  745. [ 9.386373@5] usb 1-1.4: New USB device found, idVendor=214b, idProduct=7000
  746. [ 9.386388@5] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  747. [ 9.386395@5] usb 1-1.4: Product: USB2.0 HUB
  748. [ 9.393316@5] hub 1-1.4:1.0: USB hub found
  749. [ 9.393373@5] hub 1-1.4:1.0: 4 ports detected
  750. [ 9.786176@7] usb 1-1.4.2: new low-speed USB device number 6 using xhci-hcd
  751. [ 9.904452@5] usb 1-1.4.2: New USB device found, idVendor=04f2, idProduct=0618
  752. [ 9.904468@5] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  753. [ 9.904475@5] usb 1-1.4.2: Product: USB Wireless HID Receiver
  754. [ 9.904481@5] usb 1-1.4.2: Manufacturer: Chicony
  755. [ 9.905549@6] usb 1-1.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  756. [ 9.905578@6] usb 1-1.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
  757. [ 9.905776@6] usb 1-1.4.2: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
  758. [ 9.945890@6] input: Chicony USB Wireless HID Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/0003:04F2:0618.0001/input/input3
  759. [ 9.946572@7] input: Chicony USB Wireless HID Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/0003:04F2:0618.0001/input/input4
  760. [ 9.947011@7] topseed 0003:04F2:0618.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Wireless HID Receiver] on usb-xhci-hcd.0.auto-1.4.2/input0
  761. [ 9.960256@7] input: Chicony USB Wireless HID Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:04F2:0618.0002/input/input5
  762. [ 9.960854@7] input: Chicony USB Wireless HID Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:04F2:0618.0002/input/input6
  763. [ 9.961514@7] input: Chicony USB Wireless HID Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:04F2:0618.0002/input/input7
  764. [ 9.962180@7] topseed 0003:04F2:0618.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-xhci-hcd.0.auto-1.4.2/input1
  765. [ 9.970874@7] input: Chicony USB Wireless HID Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.2/0003:04F2:0618.0003/input/input8
  766. [ 9.971421@7] topseed 0003:04F2:0618.0003: input,hidraw2: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-xhci-hcd.0.auto-1.4.2/input2
  767. [ 10.516357@5] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
  768. [ 10.517570@5] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
  769. [ 10.968025@7] random: nonblocking pool is initialized
  770. [ 14.047942@5] EXT4-fs (sda2): recovery complete
  771. [ 14.051217@5] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  772. [ 17.739182@7] ### BIG FAT WARNING
  773. [ 17.739232@7] ### sda2 is removable. suspend/resume may not work
  774. [ 17.742013@4] ### BIG FAT WARNING
  775. [ 17.742062@4] ### sda1 is removable. suspend/resume may not work
  776. [ 17.869408@0] systemd[1]: System time before build time, advancing clock.
  777. [ 17.881202@0] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  778. [ 17.881582@0] systemd[1]: Detected architecture arm64.
  779. [ 17.881817@0] systemd[1]: Set hostname to <LibreELEC>.
  780. [ 17.946813@0] systemd[1]: Listening on Journal Socket.
  781. [ 17.947281@0] systemd[1]: Listening on Journal Socket (/dev/log).
  782. [ 17.948012@0] systemd[1]: Created slice User and Session Slice.
  783. [ 17.948660@0] systemd[1]: Listening on RPCbind Server Activation Socket.
  784. [ 17.948921@0] systemd[1]: Listening on udev Control Socket.
  785. [ 17.949124@0] systemd[1]: Listening on udev Kernel Socket.
  786. [ 17.949482@0] systemd[1]: Created slice System Slice.
  787. [ 17.951106@0] systemd[1]: Mounting Variable Directory...
  788. [ 17.952980@0] systemd[1]: Starting Setup machine-id...
  789. [ 17.953114@0] systemd[1]: Reached target Slices.
  790. [ 17.953586@0] systemd[1]: Reached target Swap.
  791. [ 17.955471@0] systemd[1]: Mounting Debug File System...
  792. [ 17.958237@0] systemd[1]: Mounting POSIX Message Queue File System...
  793. [ 17.960845@0] systemd[1]: Starting Remount Root and Kernel File Systems...
  794. [ 17.963549@0] systemd[1]: Starting Show Version...
  795. [ 17.967803@4] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  796. [ 17.967856@0] systemd[1]: Starting Debug Shell on /dev/ttyS0...
  797. [ 17.968649@0] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  798. [ 17.969031@0] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  799. [ 17.969213@0] systemd[1]: Reached target Paths.
  800. [ 17.969539@0] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  801. [ 17.972767@0] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  802. [ 17.980058@2] systemd[1]: Starting Load Kernel Modules...
  803. [ 17.983163@2] systemd[1]: Starting Samba Configuration...
  804. [ 17.986935@2] systemd[1]: Mounting Temporary Directory...
  805. [ 17.987274@2] systemd[1]: Reached target RPC Port Mapper.
  806. [ 17.995444@2] systemd[1]: Mounted Debug File System.
  807. [ 17.995810@2] systemd[1]: Mounted POSIX Message Queue File System.
  808. [ 17.995999@2] systemd[1]: Mounted Variable Directory.
  809. [ 17.996312@2] systemd[1]: Mounted Temporary Directory.
  810. [ 17.997999@2] systemd[1]: Started Setup machine-id.
  811. [ 18.000125@2] systemd[1]: Started Remount Root and Kernel File Systems.
  812. [ 18.001078@2] systemd[1]: Started Show Version.
  813. [ 18.003488@2] systemd[1]: Started Debug Shell on /dev/ttyS0.
  814. [ 18.004863@2] systemd[1]: Started Create list of required static device nodes for the current kernel.
  815. [ 18.005718@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  816. [ 18.006794@2] systemd[1]: Started Samba Configuration.
  817. [ 18.017430@1] media: Linux media interface: v0.10
  818. [ 18.017712@2] systemd[1]: Starting udev Coldplug all Devices...
  819. [ 18.020180@2] systemd[1]: Starting Create Static Device Nodes in /dev...
  820. [ 18.023387@2] systemd[1]: Starting Journal Service...
  821. [ 18.025744@1] Linux video capture interface: v2.00
  822. [ 18.025762@1] WARNING: You are using an experimental version of the media stack.
  823. [ 18.025762@1] As the driver is backported to an older kernel, it doesn't offer
  824. [ 18.025762@1] enough quality for its usage in production.
  825. [ 18.025762@1] Use it with care.
  826. [ 18.025762@1] Latest git patches (needed if you report a bug to [email protected]):
  827. [ 18.025762@1] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
  828. [ 18.033198@2] amlvid:err: amlvideo_init called
  829. [ 18.033209@2] amlvid:err: amlvideo_create_instance called
  830. [ 18.033217@2] amlvid:err: v4l2_dev.name=:amlvideo-000
  831. [ 18.033554@2] amlvideo-000: V4L2 device registered as video10
  832. [ 18.035646@1] systemd[1]: Started Load Kernel Modules.
  833. [ 18.039334@1] systemd[1]: Mounting Configuration File System...
  834. [ 18.042188@1] systemd[1]: Starting Apply Kernel Variables...
  835. [ 18.047787@1] systemd[1]: Mounted Configuration File System.
  836. [ 18.048745@1] systemd[1]: Started Create Static Device Nodes in /dev.
  837. [ 18.049703@1] systemd[1]: Reached target Local File Systems (Pre).
  838. [ 18.049852@1] systemd[1]: Reached target Local File Systems.
  839. [ 18.069408@1] systemd[1]: Started Apply Kernel Variables.
  840. [ 18.158600@3] systemd[1]: Started Journal Service.
  841. [ 18.180631@0] systemd-journald[1987]: Received request to flush runtime journal from PID 1
  842. [ 19.273901@7] Console: switching to colour dummy device 80x25
  843. [ 19.280266@3] remote: cur_mode = 0
  844. [ 19.280299@3] remote: set_remote_mode[78]
  845. [ 19.357951@5] Triggered SDIO WiFi power on and bus rescan.
  846. [ 19.358004@5] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Disable! 240
  847. [ 19.558125@3] ftrace: Allocated trace_printk buffers
  848. [ 19.565418@3] mali d00c0000.t82x: Continuing without Mali regulator control
  849. [ 19.565610@3] mali d00c0000.t82x: set min pp to default 1
  850. [ 19.565618@3] mali d00c0000.t82x: set min clk default to 0
  851. [ 19.565715@3] mali d00c0000.t82x: dvfs table is 5
  852. [ 19.565722@3] mali d00c0000.t82x: dvfs table addr ffffffc062625218, ele size=48
  853. [ 19.565728@3] mali d00c0000.t82x: max clk set 3
  854. [ 19.565733@3] mali d00c0000.t82x: turbo clk set to 4
  855. [ 19.565738@3] mali d00c0000.t82x: default clk set to 4
  856. [ 19.565880@3] mali_plat=ffffffbffc106760
  857. [ 19.567374@3] gpu cooling register okay with err=0
  858. [ 19.575754@3] gpu core cooling register okay with err=0
  859. [ 19.575922@3] gpu_power_main, 63
  860. [ 19.581645@3] mali d00c0000.t82x: GPU identified as 0x0820 r1p0 status 0
  861. [ 19.595127@3] mali d00c0000.t82x: Probed as mali0
  862. [ 19.667863@5] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Enable! 240
  863. [ 19.977491@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  864. [ 19.977511@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  865. [ 19.977563@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  866. [ 19.978657@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  867. [ 19.978679@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  868. [ 19.978752@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  869. [ 19.983531@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  870. [ 19.983554@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  871. [ 19.983655@6] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  872. [ 20.015454@6] sdio: queuing unknown CIS tuple 0x01 (3 bytes)
  873. [ 20.031285@5] sdio: queuing unknown CIS tuple 0x1a (5 bytes)
  874. [ 20.042284@4] sdio: queuing unknown CIS tuple 0x1b (8 bytes)
  875. [ 20.044619@4] sdio: queuing unknown CIS tuple 0x14 (0 bytes)
  876. [ 20.049493@7] sdio: clk 200000000 SDR mode tuning start
  877. [ 20.050010@7] sdio: rx_tuning_result[0] = 10
  878. [ 20.050471@7] sdio: rx_tuning_result[3] = 10
  879. [ 20.050877@7] sdio: rx_tuning_result[4] = 10
  880. [ 20.050895@7] sdio: best_win_start =3, best_win_size =3
  881. [ 20.050904@7] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x42000
  882. [ 20.050924@7] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x42000
  883. [ 20.052842@4] sdio: queuing unknown CIS tuple 0x80 (1 bytes)
  884. [ 20.052958@7] sdio: queuing unknown CIS tuple 0x81 (1 bytes)
  885. [ 20.053039@7] sdio: queuing unknown CIS tuple 0x82 (1 bytes)
  886. [ 20.053152@7] sdio: new ultra high speed SDR104 SDIO card at address 0001
  887. [ 20.053162@6] sdio: clock 200000000, 4-bit-bus-width
  888. [ 20.053162@6]
  889. [ 20.058506@6] [sdio_reinit] finish
  890. [ 20.081013@5] input: eventlircd as /devices/virtual/input/input11
  891. [ 20.090200@6] input: eventlircd as /devices/virtual/input/input12
  892. [ 20.116977@7] cfg80211: Calling CRDA to update world regulatory domain
  893. [ 20.135716@4] input: eventlircd as /devices/virtual/input/input15
  894. [ 20.226065@3] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Disable! 240
  895. [ 20.426182@3] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Enable! 240
  896. [ 20.626228@3] sdio_reset_comm():
  897. [ 20.667151@2] sdio: queuing unknown CIS tuple 0x01 (3 bytes)
  898. [ 20.679801@0] sdio: queuing unknown CIS tuple 0x1a (5 bytes)
  899. [ 20.685258@0] sdio: queuing unknown CIS tuple 0x1b (8 bytes)
  900. [ 20.689177@0] sdio: clk 200000000 SDR mode tuning start
  901. [ 20.689453@0] sdio: rx_tuning_result[0] = 10
  902. [ 20.689779@0] sdio: rx_tuning_result[3] = 10
  903. [ 20.690042@0] sdio: rx_tuning_result[4] = 10
  904. [ 20.690052@0] sdio: best_win_start =3, best_win_size =3
  905. [ 20.690057@0] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x42000
  906. [ 20.690063@0] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x42000
  907. [ 20.690068@0] [sdio_reinit] finish
  908. [ 20.690077@0] wlan: loading driver v4.5.20.037
  909. [ 20.690607@0] hifDeviceInserted: Dumping clocks (50000000,200000000)
  910. [ 20.690620@0] Decrease host clock from 50000000 to 200000000(50000000,200000000)
  911. [ 20.690630@0] HIFDumpCCCR 0(43) 1(3) 2(0) 3(0) 4(0) 5(0) 6(0) 7(6) 8(17) 9(0) A(10) B(0) C(0) D(0) E(0) F(0) 10(0) 11(0) 12(1) 13(7) 14(7) 15(37) 16(1)
  912. [ 20.691238@0] host caps:0x00078107, card_sd3_bus_mode:0x0000001C
  913. [ 20.691246@0] hifDeviceInserted: Set MMC bus mode to SDR104.
  914. [ 20.691407@0] AR6000: Set async interrupt delay clock as 2.
  915. [ 20.693245@0] ath_hif_sdio: HIF (Atheros/multi-bss)
  916. [ 20.806283@5] AR6000: configuration opcode 3 is not used for Linux SDIO stack
  917. [ 20.806795@5] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  918. [ 20.813462@5] Board extended Data download address: 0x0
  919. [ 20.828999@5] ol_download_firmware: Using 0x1234 for the remainder of init
  920. [ 20.872784@5] ol_transfer_bin_file: Loading setup file qsetup30.bin
  921. [ 20.873060@5] android_readwrite_file: file /lib/firmware/qsetup30.bin filp_open error
  922. [ 20.873068@5] ol_transfer_bin_file: Failed to get qsetup30.bin
  923. [ 21.944879@4] HIF Interrupt processing is SYNC ONLY
  924. [ 21.944897@4] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
  925. [ 21.944903@4] AR6000: configuration opcode 5 is not used for Linux SDIO stack
  926. [ 21.945085@4] WDA_open-4688: WMA --> wmi_unified_attach - success
  927. [ 21.945126@4] ol_if_dfs_attach: called; ptr=ffffffc05b7cdb54, radar_info=ffffffc0630c7b88
  928. [ 21.945675@4] +HWT
  929. [ 21.956285@4] -HWT
  930. [ 21.956385@4] MAILBOX SWAP Service is enabled!
  931. [ 21.956391@4] Reduced Tx Complete service is enabled!
  932. [ 21.957627@4] is_full_reorder_offloaded? 0
  933. [ 21.966253@4] HTC Service:0x0300 ep:1 TX flow control disabled
  934. [ 21.966343@4] htt_tx_attach:htt_desc_start:0xffffffc058fa0000 htt_desc_end:0xffffffc058fbc200
  935. [ 21.976286@4] wma_pre_start-5056: WMA --> wmi_unified_connect_htc_service - success
  936. [ 21.976328@0] wma_mc_process_msg-21956: McThread: WNI_CFG_DNLD_REQ
  937. [ 21.996260@5] __wmi_control_rx: WMI UNIFIED SERVICE READY event
  938. [ 21.996274@5] wma_rx_service_ready_event-24791: WMA <-- WMI_SERVICE_READY_EVENTID
  939. [ 21.996289@5] wma_rx_service_ready_event-24906: WMA --> WMI_INIT_CMDID
  940. [ 22.006237@5] __wmi_control_rx: WMI UNIFIED READY event
  941. [ 22.006246@5] wma_rx_ready_event-24935: WMA <-- WMI_READY_EVENTID
  942. [ 22.007309@7] android_readwrite_file: file /lib/firmware/wlan/wlan_mac.bin filp_open error
  943. [ 22.007767@7] session id - 0, AddSta session - 0
  944. [ 22.008281@4] wma_vdev_attach-5905: vdev_id 0, txrx_vdev_handle = ffffffc0623c8200
  945. [ 22.010041@7] session id - 1, AddSta session - 0
  946. [ 22.010100@6] wma_vdev_attach-5905: vdev_id 1, txrx_vdev_handle = ffffffc0625d6200
  947. [ 22.010112@6] wma_vdev_attach-5971: P2P Device: creating self peer 8a:83:5d:ef:a5:cb, vdev_id 1
  948. [ 22.015100@6] Host SW:4.5.20.037, FW:0.0.0.60, HW:QCA9377_REV1_1
  949. [ 22.015191@6] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 0 NumBuff = 32
  950. [ 22.015421@6] wlan_logging_sock_activate_svc: Activated wlan_logging svc
  951. [ 22.015527@0] wlan: driver loaded
  952. [ 22.026439@5] target uses HTT version 3.32; host uses 3.23
  953. [ 22.026452@5] *** Warning: host/target HTT versions are different, though compatible!
  954. [ 22.029382@5] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 0 to 9600
  955. [ 22.029538@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 9600
  956. [ 22.029584@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 115200
  957. [ 22.136378@5] TXRX: ol_txrx_peer_find_add_id: Delete Peer ffffffc05b73d000
  958. [ 22.166401@1] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  959. [ 22.556297@5] TXRX: ol_txrx_peer_find_add_id: Delete Peer ffffffc05a1fe000
  960. [ 22.646664@7] wlan: 88:83:5d:68:a5:cb connected to dc:53:7c:de:bf:df
  961. [ 22.646809@7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  962. [ 26.476132@6] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000
  963. [ 26.609744@2] Bluetooth: Core ver 2.18
  964. [ 26.609936@2] NET: Registered protocol family 31
  965. [ 26.609942@2] Bluetooth: HCI device and connection manager initialized
  966. [ 26.609975@2] Bluetooth: HCI socket layer initialized
  967. [ 26.609984@2] Bluetooth: L2CAP socket layer initialized
  968. [ 26.610019@2] Bluetooth: SCO socket layer initialized
  969. [ 26.613477@2] Bluetooth: HCI UART driver ver 2.2
  970. [ 26.613493@2] Bluetooth: HCI H4 protocol initialized
  971. [ 26.613498@2] Bluetooth: HCI BCSP protocol initialized
  972. [ 26.613503@2] Bluetooth: HCILL protocol initialized
  973. [ 26.613508@2] Bluetooth: HCIATH3K protocol initialized
  974. [ 26.613513@2] Bluetooth: HCI Three-wire UART (H5) protocol initialized
  975. [ 31.791622@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  976. [ 31.791700@2] aml_spdif_dai: share the same clock
  977. [ 31.791711@2] aml_audio_hw: IEC958 PCM32
  978. [ 31.791719@2] hdmitx: audio: aout notify rate 44100
  979. [ 31.791724@2] hdmitx: audio: aout notify size 32
  980. [ 31.791731@2] hdmitx: audio: aout notify format CT_PCM
  981. [ 31.791736@2] hdmtix: set audio
  982. [ 31.791754@2] hdmitx tx_aud_src = 0
  983. [ 31.791785@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  984. [ 31.791791@2] hdmitx aud_n_para = 6272
  985. [ 31.791813@2] hdmitx set channel status
  986. [ 31.791880@2] hdmitx: audio: Audio Type: PCM
  987. [ 31.791886@2] hdmitx: audio: set audio param
  988. [ 31.791898@2] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
  989. [ 31.792369@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  990. [ 31.792379@2] aml_spdif_dai: share the same clock
  991. [ 31.792389@2] aml_audio_hw: IEC958 PCM32
  992. [ 31.792396@2] hdmitx: audio: aout notify rate 44100
  993. [ 31.792401@2] hdmitx: audio: aout notify size 32
  994. [ 31.792406@2] hdmitx: audio: no update
  995. [ 31.792416@2] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
  996. [ 31.792689@2] channel count should be 8, we got 2 aborting
  997. [ 31.795640@3] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
  998. [ 31.795663@3] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
  999. [ 31.965253@0] fb: osd[0] canvas.idx =0x40
  1000. [ 31.965255@0] fb: osd[0] canvas.addr=0x79300000
  1001. [ 31.965257@0] fb: osd[0] canvas.width=7680
  1002. [ 31.965259@0] fb: osd[0] canvas.height=3240
  1003. [ 31.965260@0] fb: osd[0] frame.width=1920
  1004. [ 31.965261@0] fb: osd[0] frame.height=1080
  1005. [ 31.982087@0] vout_serve: vmode set to null
  1006. [ 31.982126@0] fb: current vmode=1080p60hz, cmd: 0x50000
  1007. [ 31.982135@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
  1008. [ 31.982141@0] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
  1009. [ 31.982155@0] tv_vout: 3Invalid video output modes.
  1010. [ 31.982158@0] tv_vout: new mode =null set ok
  1011. [ 31.982162@0] vout_serve: vinfo mode is: null
  1012. [ 31.982166@0] vout_serve: new mode null set ok
  1013. [ 31.982179@0] hdmitx: edid: not find mapped vic
  1014. [ 31.982186@0] hdmitx: video: get current mode: null
  1015. [ 31.982190@0] hdmitx: update rx hdr info 0
  1016. [ 31.982194@0] hdmitx: update physcial size: 160 90
  1017. [ 31.982198@0] hdmitx: video: null not valid hdmi mode
  1018. [ 31.982222@0] fb: current vmode=null, cmd: 0x10000
  1019. [ 31.982439@0] hdmitx: set frac_rate_policy as 0
  1020. [ 31.982459@0] vout_serve: vmode set to 1080p60hz
  1021. [ 31.982471@0] vout_serve: disable HDMI PHY as soon as possible
  1022. [ 31.982476@0] fb: current vmode=null, cmd: 0x50000
  1023. [ 31.982481@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
  1024. [ 31.982485@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  1025. [ 31.982493@0] tv_vout: TV mode 1080p60hz selected.
  1026. [ 31.982499@0]
  1027. [ 31.982499@0] vdac_enable: on:0,module_sel:8
  1028. [ 31.982512@0]
  1029. [ 31.982512@0] vdac_enable: on:0,module_sel:8
  1030. [ 31.982521@0] tv_vout: new mode =1080p60hz set ok
  1031. [ 31.982524@0] vout_serve: vinfo mode is: 1080p60hz
  1032. [ 31.982527@0] vout_serve: new mode 1080p60hz set ok
  1033. [ 31.982541@0] hdmitx: video: get current mode: 1080p60hz
  1034. [ 31.982545@0] hdmitx: update rx hdr info 0
  1035. [ 31.982548@0] hdmitx: update physcial size: 160 90
  1036. [ 31.982587@0] hdmitx: system: already init VIC = 0 Now VIC = 16
  1037. [ 31.982592@0] hdmitx: rx no SCDC present indicator
  1038. [ 31.984603@0] hdmitx: ddc rd8b error 0x54 0x01
  1039. [ 31.984719@0] hdmitx: system: irq 80000001
  1040. [ 31.986615@0] hdmitx: ddc rd8b error 0x54 0x01
  1041. [ 31.986622@0] hdmirx version is 1.4 or below
  1042. [ 31.986626@0] hdmitx div40: 0
  1043. [ 31.986645@0] Start = 0x10000100 End = 0x100001ff
  1044. [ 31.986655@0] [0x10000104]: 0x00000001
  1045. [ 31.986824@0] [0x10000180]: 0x000000ff
  1046. [ 31.986829@0] [0x10000181]: 0x000000ff
  1047. [ 31.986834@0] [0x10000182]: 0x00000003
  1048. [ 31.986838@0] [0x10000183]: 0x00000007
  1049. [ 31.986843@0] [0x10000184]: 0x0000003f
  1050. [ 31.986847@0] [0x10000185]: 0x00000002
  1051. [ 31.986853@0] [0x10000187]: 0x000000ff
  1052. [ 31.986858@0] [0x10000188]: 0x00000003
  1053. [ 32.016129@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
  1054. [ 32.016138@0] hdmitx: system: set pll
  1055. [ 32.016142@0] hdmitx: system: param->VIC:16
  1056. [ 32.016146@0] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0
  1057. [ 32.016157@0] config HPLL = 2970000
  1058. [ 32.016177@0] HPLL: 0xc000027b
  1059. [ 32.016180@0] config HPLL done
  1060. [ 32.016189@0] set_hpll_od3_clk_div[437] div = 6
  1061. [ 32.016197@0] j = 4 vid_clk_div = 1
  1062. [ 32.016207@0] hdmitx: set enc for VIC: 16
  1063. [ 32.016227@0] hdmitx_set_hw[4947] set VIC = 16
  1064. [ 32.016233@0] hdmitx: system: irq 80000001
  1065. [ 32.016440@0] hdmitx: system: irq 80000001
  1066. [ 32.028134@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1067. [ 32.030145@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1068. [ 32.032154@0] hdmitx: ddc rd8b error 0x54 0x21
  1069. [ 32.032175@0] Start = 0x10000100 End = 0x100001ff
  1070. [ 32.032185@0] [0x10000104]: 0x00000001
  1071. [ 32.032355@0] [0x10000180]: 0x000000ff
  1072. [ 32.032360@0] [0x10000181]: 0x000000ff
  1073. [ 32.032364@0] [0x10000182]: 0x00000003
  1074. [ 32.032369@0] [0x10000183]: 0x00000007
  1075. [ 32.032374@0] [0x10000184]: 0x0000003f
  1076. [ 32.032378@0] [0x10000185]: 0x00000002
  1077. [ 32.032384@0] [0x10000187]: 0x000000ff
  1078. [ 32.032388@0] [0x10000188]: 0x00000003
  1079. [ 32.148151@0] hdmitx: system: PHY Setting Done
  1080. [ 32.152174@0] Sink is HDMI device
  1081. [ 32.152191@0] hdmitx: system: packet: can't get vendor data
  1082. [ 32.152197@0] 1080p60hz 60 1
  1083. [ 32.152203@0] 1080p60hz 60 1
  1084. [ 32.152209@0] hdmtix: set audio
  1085. [ 32.152222@0] hdmitx tx_aud_src = 0
  1086. [ 32.152252@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  1087. [ 32.152258@0] hdmitx aud_n_para = 6272
  1088. [ 32.152280@0] hdmitx set channel status
  1089. [ 32.152347@0] hdmitx: audio: Audio Type: PCM
  1090. [ 32.152355@0] fb: current vmode=1080p60hz, cmd: 0x10000
  1091. [ 32.220923@4] fb: osd[0] enable: 1 (kodi.bin)
  1092. [ 92.166732@0] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
  1093. [ 92.166751@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
  1094. [ 92.166820@7] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  1095. [ 92.166838@7] aml_spdif_dai: share the same clock
  1096. [ 92.166850@7] aml_audio_hw: IEC958 PCM32
  1097. [ 92.166859@7] hdmitx: audio: aout notify rate 44100
  1098. [ 92.166864@7] hdmitx: audio: aout notify size 32
  1099. [ 92.166869@7] hdmitx: audio: no update
  1100. [ 92.166878@7] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!