D2000 CRB flash log

$ sudo -E make BOARD=quark_d2000_crb flash
[sudo] password for hbruce:
make[1]: Entering directory '/home/hbruce/Projects/zephyr-project'
make[2]: Entering directory '/home/hbruce/Projects/zephyr-project/samples/hello_world/nanokernel/outdir'
  Using /home/hbruce/Projects/zephyr-project as source for kernel
  CHK     include/generated/version.h
  CHK     misc/generated/configs.c
  CHK     include/generated/offsets.h
Flashing quark_d2000_crb
Flashing Target Device
Open On-Chip Debugger 0.9.0-dirty (2016-05-11-16:25)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
adapter speed: 1000 kHz
trst_only separate trst_push_pull
adapter speed: 1000 kHz
trst_only separate trst_push_pull
adapter speed: 6000 kHz
Info : clock speed 6000 kHz
Info : TAP quark_d2000.cltap does not have IDCODE
Info : TAP auto0.tap does not have IDCODE
Info : TAP auto1.tap does not have IDCODE
Info : TAP auto2.tap does not have IDCODE
Info : JTAG tap: auto3.tap tap/device found: 0x10208201 (mfg: 0x100, part: 0x0208, ver: 0x1)
Info : TAP auto4.tap does not have IDCODE
Info : TAP auto5.tap does not have IDCODE
Info : TAP auto6.tap does not have IDCODE
Info : TAP auto7.tap does not have IDCODE
Info : TAP auto8.tap does not have IDCODE
Info : TAP auto9.tap does not have IDCODE
Info : TAP auto10.tap does not have IDCODE
Info : TAP auto11.tap does not have IDCODE
Info : TAP auto12.tap does not have IDCODE
Info : TAP auto13.tap does not have IDCODE
Info : TAP auto14.tap does not have IDCODE
Info : TAP auto15.tap does not have IDCODE
Info : TAP auto16.tap does not have IDCODE
Info : TAP auto17.tap does not have IDCODE
Info : TAP auto18.tap does not have IDCODE
Info : TAP auto19.tap does not have IDCODE
Warn : Unexpected idcode after end of chain: 52 0x00000000
Warn : Unexpected idcode after end of chain: 84 0x00000000
Warn : Unexpected idcode after end of chain: 116 0x00000000
Warn : Unexpected idcode after end of chain: 148 0x00000000
Warn : Unexpected idcode after end of chain: 180 0x00000000
Warn : Unexpected idcode after end of chain: 212 0x00000000
Warn : Unexpected idcode after end of chain: 244 0x00000000
Warn : Unexpected idcode after end of chain: 276 0x00000000
Warn : Unexpected idcode after end of chain: 308 0x00000000
Warn : Unexpected idcode after end of chain: 340 0x00000000
Warn : Unexpected idcode after end of chain: 372 0x00000000
Warn : Unexpected idcode after end of chain: 404 0x00000000
Warn : Unexpected idcode after end of chain: 436 0x00000000
Warn : Unexpected idcode after end of chain: 468 0x00000000
Warn : Unexpected idcode after end of chain: 500 0x00000000
Warn : Unexpected idcode after end of chain: 532 0x00000000
Warn : Unexpected idcode after end of chain: 564 0x00000000
Warn : Unexpected idcode after end of chain: 596 0x00000000
Warn : Unexpected idcode after end of chain: 628 0x00000000
Error: double-check your JTAG setup (interface, speed, ...)
Error: Trying to use configured scan chain anyway...
Error: quark_d2000.cltap: IR capture error; saw 0x0 not 0x1
Warn : Bypassing JTAG setup events due to errors
    TargetName         Type       Endian TapName            State
--  ------------------ ---------- ------ ------------------ ------------
 0* lmt.cpu            quark_d2000 little quark_d2000.lmt    tap-disabled
Info : TAP quark_d2000.cltap does not have IDCODE
Info : TAP auto0.tap does not have IDCODE
Info : TAP auto1.tap does not have IDCODE
Info : TAP auto2.tap does not have IDCODE
Info : JTAG tap: auto3.tap tap/device found: 0x10208201 (mfg: 0x100, part: 0x0208, ver: 0x1)
Info : TAP auto4.tap does not have IDCODE
Info : TAP auto5.tap does not have IDCODE
Info : TAP auto6.tap does not have IDCODE
Info : TAP auto7.tap does not have IDCODE
Info : TAP auto8.tap does not have IDCODE
Info : TAP auto9.tap does not have IDCODE
Info : TAP auto10.tap does not have IDCODE
Info : TAP auto11.tap does not have IDCODE
Info : TAP auto12.tap does not have IDCODE
Info : TAP auto13.tap does not have IDCODE
Info : TAP auto14.tap does not have IDCODE
Info : TAP auto15.tap does not have IDCODE
Info : TAP auto16.tap does not have IDCODE
Info : TAP auto17.tap does not have IDCODE
Info : TAP auto18.tap does not have IDCODE
Info : TAP auto19.tap does not have IDCODE
Info : TAP auto0.tap does not have IDCODE
Info : TAP auto1.tap does not have IDCODE
Warn : Unexpected idcode after end of chain: 54 0x00000000
Warn : Unexpected idcode after end of chain: 86 0x00000000
Warn : Unexpected idcode after end of chain: 118 0x00000000
Warn : Unexpected idcode after end of chain: 150 0x00000000
Warn : Unexpected idcode after end of chain: 182 0x00000000
Warn : Unexpected idcode after end of chain: 214 0x00000000
Warn : Unexpected idcode after end of chain: 246 0x00000000
Warn : Unexpected idcode after end of chain: 278 0x00000000
Warn : Unexpected idcode after end of chain: 310 0x00000000
Warn : Unexpected idcode after end of chain: 342 0x00000000
Warn : Unexpected idcode after end of chain: 374 0x00000000
Warn : Unexpected idcode after end of chain: 406 0x00000000
Warn : Unexpected idcode after end of chain: 438 0x00000000
Warn : Unexpected idcode after end of chain: 470 0x00000000
Warn : Unexpected idcode after end of chain: 502 0x00000000
Warn : Unexpected idcode after end of chain: 534 0x00000000
Warn : Unexpected idcode after end of chain: 566 0x00000000
Warn : Unexpected idcode after end of chain: 598 0x00000000
Warn : Unexpected idcode after end of chain: 630 0x00000000
Warn : Unexpected idcode after end of chain: 662 0x00000000
Warn : Unexpected idcode after end of chain: 694 0x00000000
Error: double-check your JTAG setup (interface, speed, ...)
Error: Trying to use configured scan chain anyway...
Error: quark_d2000.cltap: IR capture error; saw 0x0 not 0x1
Warn : Bypassing JTAG setup events due to errors
Error: Target not examined yet

Done flashing
make[2]: Leaving directory '/home/hbruce/Projects/zephyr-project/samples/hello_world/nanokernel/outdir'
make[1]: Leaving directory '/home/hbruce/Projects/zephyr-project'
[hbruce@hbruce-desk3 nanokernel]$