JetsonOrinNanoGPIO

➜  sudo cat /sys/kernel/debug/pinctrl/2430000.pinmux/pinconf-groups
Pin config settings per pin group
Format: group (name): configs
0 (soc_gpio08_pb0):
    pull=2
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
1 (soc_gpio36_pm5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
2 (soc_gpio53_pm6):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
3 (soc_gpio55_pm4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
4 (soc_gpio38_pm7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
5 (soc_gpio39_pn1):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
6 (soc_gpio40_pn2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
7 (dp_aux_ch0_hpd_pm0):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=dp
8 (dp_aux_ch1_hpd_pm1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
9 (dp_aux_ch2_hpd_pm2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
10 (dp_aux_ch3_hpd_pm3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
11 (dp_aux_ch1_p_pn3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
12 (dp_aux_ch1_n_pn4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
13 (dp_aux_ch2_p_pn5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
14 (dp_aux_ch2_n_pn6):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
15 (dp_aux_ch3_p_pn7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
16 (dp_aux_ch3_n_pn0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
17 (eqos_td3_pe4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
18 (eqos_td2_pe3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
19 (eqos_td1_pe2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
20 (eqos_td0_pe1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
21 (eqos_rd3_pf1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
22 (eqos_rd2_pf0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
23 (eqos_rd1_pe7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
24 (eqos_sma_mdio_pf4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
25 (eqos_rd0_pe6):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
26 (eqos_sma_mdc_pf5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
27 (eqos_comp):
    tristate=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    drive-type=1
    function=eqos
28 (eqos_txc_pe0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
29 (eqos_rxc_pf3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
30 (eqos_tx_ctl_pe5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
31 (eqos_rx_ctl_pf2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
32 (pex_l2_clkreq_n_pk4):
    pull=0
    tristate=0
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
33 (pex_wake_n_pl2):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
34 (pex_l1_clkreq_n_pk2):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe1
35 (pex_l1_rst_n_pk3):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe1
36 (pex_l0_clkreq_n_pk0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
37 (pex_l0_rst_n_pk1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
38 (pex_l2_rst_n_pk5):
    pull=0
    tristate=0
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
39 (pex_l3_clkreq_n_pk6):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
40 (pex_l3_rst_n_pk7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
41 (pex_l4_clkreq_n_pl0):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe4
42 (pex_l4_rst_n_pl1):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe4
43 (soc_gpio34_pl3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
44 (pex_l5_clkreq_n_paf0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
45 (pex_l5_rst_n_paf1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
46 (pex_l6_clkreq_n_paf2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
47 (pex_l6_rst_n_paf3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
48 (pex_l10_clkreq_n_pag6):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
49 (pex_l10_rst_n_pag7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
50 (pex_l7_clkreq_n_pag0):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe7
51 (pex_l7_rst_n_pag1):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe7
52 (pex_l8_clkreq_n_pag2):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe8
53 (pex_l8_rst_n_pag3):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe8
54 (pex_l9_clkreq_n_pag4):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe9
55 (pex_l9_rst_n_pag5):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=pe9
56 (qspi0_io3_pc5):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=qspi0
57 (qspi0_io2_pc4):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=qspi0
58 (qspi0_io1_pc3):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=qspi0
59 (qspi0_io0_pc2):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=qspi0
60 (qspi0_sck_pc0):
    pull=1
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=qspi0
61 (qspi0_cs_n_pc1):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=qspi0
62 (qspi1_io3_pd3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
63 (qspi1_io2_pd2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
64 (qspi1_io1_pd1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
65 (qspi1_io0_pd0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
66 (qspi1_sck_pc6):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
67 (qspi1_cs_n_pc7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    drive-type=1
    gpio-mode=1
    function=rsvd1
68 (qspi_comp):
    tristate=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    drive-type=1
    function=qspi
69 (sdmmc1_clk_pj0):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=1
    gpio-mode=1
    function=sdmmc1
70 (sdmmc1_cmd_pj1):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=1
    gpio-mode=1
    function=sdmmc1
71 (sdmmc1_comp):
    tristate=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    drive-type=0
    function=sdmmc1
72 (sdmmc1_dat3_pj5):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=1
    gpio-mode=1
    function=sdmmc1
73 (sdmmc1_dat2_pj4):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=1
    gpio-mode=1
    function=sdmmc1
74 (sdmmc1_dat1_pj3):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=1
    gpio-mode=1
    function=sdmmc1
75 (sdmmc1_dat0_pj2):
    pull=2
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=1
    gpio-mode=1
    function=sdmmc1
76 (ufs0_rst_n_pae1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=10
    pull-up-strength=10
    drive-type=1
    gpio-mode=1
    function=rsvd1
77 (ufs0_ref_clk_pae0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=10
    pull-up-strength=10
    drive-type=1
    gpio-mode=1
    function=rsvd1
78 (spi3_miso_py1):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
79 (spi1_cs0_pz6):
    pull=2
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
80 (spi3_cs0_py3):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
81 (spi1_miso_pz4):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
82 (spi3_cs1_py4):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
83 (spi1_sck_pz3):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
84 (spi3_sck_py0):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
85 (spi1_cs1_pz7):
    pull=2
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
86 (spi1_mosi_pz5):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
87 (spi3_mosi_py2):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
88 (uart2_tx_px4):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=uartb
89 (uart2_rx_px5):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=uartb
90 (uart2_rts_px6):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=uartb
91 (uart2_cts_px7):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=uartb
92 (uart5_tx_py5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
93 (uart5_rx_py6):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
94 (uart5_rts_py7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
95 (uart5_cts_pz0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
96 (gpu_pwr_req_px0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
97 (gp_pwm3_px3):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=gp
98 (gp_pwm2_px2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
99 (cv_pwr_req_px1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
100 (usb_vbus_en0_pz1):
    pull=2
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
101 (usb_vbus_en1_pz2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
102 (extperiph2_clk_pp1):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=extperiph2
103 (extperiph1_clk_pp0):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=extperiph1
104 (cam_i2c_sda_pp3):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=15
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=i2c3
105 (cam_i2c_scl_pp2):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=15
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=i2c3
106 (soc_gpio23_pp4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=vi0
107 (soc_gpio24_pp5):
    pull=2
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=soc
108 (soc_gpio25_pp6):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=vi0
109 (pwr_i2c_scl_pp7):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=i2c5
110 (pwr_i2c_sda_pq0):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=i2c5
111 (soc_gpio28_pq1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
112 (soc_gpio29_pq2):
    pull=0
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=nv
113 (soc_gpio30_pq3):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
114 (soc_gpio31_pq4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
115 (soc_gpio32_pq5):
    pull=2
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
116 (soc_gpio33_pq6):
    pull=2
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
117 (soc_gpio35_pq7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
118 (soc_gpio37_pr0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=gp
119 (soc_gpio56_pr1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
120 (uart1_cts_pr5):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
121 (uart1_rts_pr4):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
122 (uart1_rx_pr3):
    pull=2
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=uarta
123 (uart1_tx_pr2):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=uarta
124 (cpu_pwr_req_pi5):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
125 (uart4_cts_ph6):
    pull=0
    tristate=0
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
126 (uart4_rts_ph5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd2
127 (uart4_rx_ph4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
128 (uart4_tx_ph3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd2
129 (gen1_i2c_scl_pi3):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=i2c1
130 (gen1_i2c_sda_pi4):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=31
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=i2c1
131 (soc_gpio20_pg7):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
132 (soc_gpio21_ph0):
    pull=1
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
133 (soc_gpio22_ph1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
134 (soc_gpio13_pg0):
    pull=0
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
135 (soc_gpio14_pg1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
136 (soc_gpio15_pg2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd0
137 (soc_gpio16_pg3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
138 (soc_gpio17_pg4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
139 (soc_gpio18_pg5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
140 (soc_gpio19_pg6):
    pull=1
    tristate=1
    enable-input=1
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
141 (soc_gpio41_ph7):
    pull=1
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=rsvd2
142 (soc_gpio42_pi0):
    pull=1
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=0
    function=rsvd2
143 (soc_gpio43_pi1):
    pull=1
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=0
    function=rsvd2
144 (soc_gpio44_pi2):
    pull=1
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=0
    function=rsvd2
145 (soc_gpio06_ph2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
146 (soc_gpio07_pi6):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=gp
147 (dap4_sclk_pa4):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=i2s4
148 (dap4_dout_pa5):
    pull=0
    tristate=0
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=i2s4
149 (dap4_din_pa6):
    pull=1
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=i2s4
150 (dap4_fs_pa7):
    pull=0
    tristate=0
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=i2s4
151 (dap6_sclk_pa0):
    pull=0
    tristate=0
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=0
    function=rsvd1
152 (dap6_dout_pa1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
153 (dap6_din_pa2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
154 (dap6_fs_pa3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd1
155 (soc_gpio45_pad0):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=rsvd0
156 (soc_gpio46_pad1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=rsvd0
157 (soc_gpio47_pad2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=rsvd0
158 (soc_gpio48_pad3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=rsvd0
159 (soc_gpio57_pac4):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
160 (soc_gpio58_pac5):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
161 (soc_gpio59_pac6):
    pull=2
    tristate=1
    enable-input=1
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=31
    pull-up-strength=31
    drive-type=0
    gpio-mode=1
    function=rsvd2
162 (soc_gpio60_pac7):
    pull=1
    tristate=1
    enable-input=0
    open-drain=0
    io-reset=0
    rcv-sel=0
    io-hv=0
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd0
163 (spi5_cs0_pac3):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd3
164 (spi5_miso_pac1):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd3
165 (spi5_mosi_pac2):
    pull=1
    tristate=1
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=0
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd3
166 (spi5_sck_pac0):
    pull=0
    tristate=0
    enable-input=0
    open-drain=1
    io-reset=1
    rcv-sel=1
    io-hv=1
    schmitt=1
    pull-down-strength=0
    pull-up-strength=0
    drive-type=0
    gpio-mode=1
    function=rsvd3