Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2025.04.23 15:47:07 =~=~=~=~=~=~=~=~=~=~=~=
- [INFO: PlatInfo ] CHIP_ID: 0x1602, REV_ID: 0xA0, AROM_VER: 2022.11.06
- [INFO: PlatInfo ] PLATFORM: CRANELR (SILICON)
- [INFO: Main ]
- [INFO: Main ] Starting AROM-CRANE (Version: 2022.11.11)
- [INFO: ClkDrv ] QSPI clock configured at 13 MHz, level 1
- [INFO: QspiFlash ] Detecting QSPI flash devices...
- [INFO: QspiFlash ] Found a known spi flash device "GD25LE32E"
- [INFO: QspiFlash ] SPI nor flash: Manufacturer ID: 0xC8, Device ID: 0x6016
- [INFO: BootCtrl ] Loading bootloader from QSPI flash...
- [INFO: UbiSimple ] Detected peb size is 4096, the first good peb number is 0
- [INFO: Crypto ] Initializing crypto library...
- [INFO: Main ] Running in normal booting mode.
- [INFO: Main ] Loading...
- [INFO: Bl1Main ] Welcome to boot rom.
- [INFO: Bl1Main ] ### Non-trusted boot mode. ###
- [INFO: Bl1Main ] Found preboot volume, size is 24920 bytes
- [INFO: Bl1Main ] BL1: Trying to load and verify BL2 image from volume preboot...
- [INFO: BlCommon ] Loading image from #0x9f30 to #0x80 with size 41408 successfully.
- [INFO: Bl1Main ] BL1: OKay.
- [PRI : Preboot ] Executing preboot application...
- [PRI : Preboot ] Preboot version: 2023.08.22
- [PRI : PMIC ] Found PMIC with Id: 0x59
- [PRI : PMIC ] PMIC watchdog is disabled, reg val = 0x5
- [PRI : PMIC ] [BP_0xe5] = 0x2
- [PRI : PMIC ] [BP_0xe6] = 0x0
- [PRI : Preboot ] Power_up_reason=0x2.
- [WARN: Preboot ] Warning: power_up_reason=0x2 is abnormal.
- [PRI : Psram ] [PSRAM] psram init Crane common.
- [PRI : EFuse ] No embedded flash
- [PRI : Psram ] Psram cache enabled !!! :cache size=[128B], @[0xC0104000]=[0x000A3B11]
- [PRI : Psram ] WB_4M
- [INFO: Bl1Main ] Found bootloader volume, size is 33440 bytes
- [INFO: Bl1Main ] BL1: Trying to load and verify BL2 image from volume bootloader...
- [INFO: BlCommon ] Loading image from #0x7e0f7e88 to #0x80 with size 14244 successfully.
- [INFO: Bl1Main ] BL1: OKay.
- [PRI : Boot2 ] Executing boot2 application...
- [PRI : Boot2 ] Boot2 version: 2023.08.22
- [WARN: Boot2 ] usb is not connected
- [INFO: BlCommon ] Loading image from #0x7e002698 to #0x7e100000 with size 29294 successfully.
- [BOOT33]VB_VERSION_DATE :[20231018]
- ** PC : 0x80017000
- Version: SDK_1.011.124 Aug 23 2024 16:29:04
- Ac 4, Board 2, DKB 1
- PSRAM fuse: 13
- Cinit 2
- Flash type: nvm 0, factory 0, fota 0
- Phase1Inits
- diag Phase1 Init
- SVT 136
- profile num = 2
- CRNLR_SVC_FP[0] = 0x29
- CRNLR_SVC_FP[1] = 0x29
- CRNLR_SVC_FP[2] = 0x29
- CRNLR_SVC_FP[3] = 0x33
- Bootup not silent
- InitTask started
- Chip ID: 0xa01602
- PS_NONCACHE_DATA_ZI rf [0x7e389300]
- check unpressed rf/dsp size,rf [0x0000a000],dsp [0x00052000]
- Crane mpu configure
- start file system init
- bbu_qspi_init:isMiniSys=0,reserved_start_addr=0x358000, reserved_end_addr=0x375000
- qspi_nor_set_flash_block_protect:update status1=0x14, status2=0x42.
- qspi_nor_set_flash_block_protect:write status register finished.
- qspi_nor_set_flash_block_protect:read after update, status1=0x14,status2=0x42.
- SPI Nor/NAND flash init success. flash_protect_area_type=25
- FDI_Transport_Fsys_Register: 0, C:/
- LfsAddress[PTN 0]: 0x385000 ~ 0x3e8fff, block: 901 ~ 1000, block cnt: 100, lookahead 16
- LfsGrpCnt 4
- lfs root is valid
- [PTN 0] free size: 262144
- lfs[PTN 0] init success
- eeHandlerPhase2Init
- Usb mode 0, descriptor 34
- USIMPhase2Init 0
- copy rf size[0x0000a000] to [0x7e010000]
- power_up_reason: 0x2, power_down_reason: 0x2
- AT command server ready!
- Booting done
- SW restart reason: Normal power on
- [jacana] download fw ret:0.
- creg not match 0
Advertisement
Add Comment
Please, Sign In to add comment