API tools faq
paste
Advertisement
Stybyk

160GBDISK

Stybyk
Jul 25th, 2017
356
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.91 KB | None | 0 0
raw download clone embed print report
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Hitachi Travelstar 5K250
  3. Device Model: Hitachi HTS542516K9SA00
  4. Serial Number: 080713BB6300ACKGVS5G
  5. LU WWN Device Id: 5 000cca 589f1081d
  6. Firmware Version: BBCOC33P
  7. User Capacity: 160,041,885,696 bytes [160 GB]
  8. Sector Size: 512 bytes logical/physical
  9. Device is: In smartctl database [for details use: -P show]
  10. ATA Version is: 8
  11. ATA Standard is: ATA-8-ACS revision 3f
  12. Local Time is: Tue Jul 25 10:29:21 2017 CEST
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x00) Offline data collection activity
  21. was never started.
  22. Auto Offline Data Collection: Disabled.
  23. Self-test execution status: ( 0) The previous self-test routine completed
  24. without error or no self-test has ever
  25. been run.
  26. Total time to complete Offline
  27. data collection: ( 645) seconds.
  28. Offline data collection
  29. capabilities: (0x5b) SMART execute Offline immediate.
  30. Auto Offline data collection on/off support.
  31. Suspend Offline collection upon new
  32. command.
  33. Offline surface scan supported.
  34. Self-test supported.
  35. No Conveyance Self-test supported.
  36. Selective Self-test supported.
  37. SMART capabilities: (0x0003) Saves SMART data before entering
  38. power-saving mode.
  39. Supports SMART auto save timer.
  40. Error logging capability: (0x01) Error logging supported.
  41. General Purpose Logging supported.
  42. Short self-test routine
  43. recommended polling time: ( 2) minutes.
  44. Extended self-test routine
  45. recommended polling time: ( 75) minutes.
  46. SCT capabilities: (0x003d) SCT Status supported.
  47. SCT Error Recovery Control supported.
  48. SCT Feature Control supported.
  49. SCT Data Table supported.
  50.  
  51. SMART Attributes Data Structure revision number: 16
  52. Vendor Specific SMART Attributes with Thresholds:
  53. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  54. 1 Raw_Read_Error_Rate 0x000b 095 095 062 Pre-fail Always - 18
  55. 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
  56. 3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
  57. 4 Start_Stop_Count 0x0012 096 096 000 Old_age Always - 6719
  58. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  60. 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
  61. 9 Power_On_Hours 0x0012 045 045 000 Old_age Always - 24257
  62. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  63. 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 6312
  64. 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
  65. 192 Power-Off_Retract_Count 0x0032 093 093 000 Old_age Always - 1599
  66. 193 Load_Cycle_Count 0x0012 027 027 000 Old_age Always - 733645
  67. 194 Temperature_Celsius 0x0002 144 144 000 Old_age Always - 38 (Min/Max 9/58)
  68. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 60
  69. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  70. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  71. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 4
  72. 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
  73.  
  74. SMART Error Log Version: 1
  75. ATA Error Count: 263 (device log contains only the most recent five errors)
  76. CR = Command Register [HEX]
  77. FR = Features Register [HEX]
  78. SC = Sector Count Register [HEX]
  79. SN = Sector Number Register [HEX]
  80. CL = Cylinder Low Register [HEX]
  81. CH = Cylinder High Register [HEX]
  82. DH = Device/Head Register [HEX]
  83. DC = Device Command Register [HEX]
  84. ER = Error register [HEX]
  85. ST = Status register [HEX]
  86. Powered_Up_Time is measured from power on, and printed as
  87. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  88. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  89.  
  90. Error 263 occurred at disk power-on lifetime: 5339 hours (222 days + 11 hours)
  91. When the command that caused the error occurred, the device was active or idle.
  92.  
  93. After command completion occurred, registers were:
  94. ER ST SC SN CL CH DH
  95. -- -- -- -- -- -- --
  96. 40 51 02 7f 11 60 e0 Error: UNC 2 sectors at LBA = 0x0060117f = 6295935
  97.  
  98. Commands leading to the command that caused the error were:
  99. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  100. -- -- -- -- -- -- -- -- ---------------- --------------------
  101. 25 00 02 7f 11 60 e0 00 00:02:02.400 READ DMA EXT
  102. 25 00 08 1f 55 00 e0 00 00:02:02.400 READ DMA EXT
  103. 35 00 08 1f 55 00 e0 00 00:02:02.400 WRITE DMA EXT
  104. 25 00 08 1f 55 00 e0 00 00:02:02.400 READ DMA EXT
  105. 25 00 08 1f 55 00 e0 00 00:02:02.400 READ DMA EXT
  106.  
  107. Error 262 occurred at disk power-on lifetime: 5339 hours (222 days + 11 hours)
  108. When the command that caused the error occurred, the device was active or idle.
  109.  
  110. After command completion occurred, registers were:
  111. ER ST SC SN CL CH DH
  112. -- -- -- -- -- -- --
  113. 40 51 08 7f 11 60 e0 Error: UNC 8 sectors at LBA = 0x0060117f = 6295935
  114.  
  115. Commands leading to the command that caused the error were:
  116. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  117. -- -- -- -- -- -- -- -- ---------------- --------------------
  118. 25 00 08 7f 11 60 e0 00 00:01:21.700 READ DMA EXT
  119. 25 00 08 7f 11 60 e0 00 00:01:17.600 READ DMA EXT
  120. 25 00 08 7f 11 60 e0 00 00:01:13.400 READ DMA EXT
  121. 25 00 08 7f 11 60 e0 00 00:01:09.300 READ DMA EXT
  122. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  123.  
  124. Error 261 occurred at disk power-on lifetime: 5339 hours (222 days + 11 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 40 51 08 7f 11 60 e0 Error: UNC 8 sectors at LBA = 0x0060117f = 6295935
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. 25 00 08 7f 11 60 e0 00 00:01:17.600 READ DMA EXT
  136. 25 00 08 7f 11 60 e0 00 00:01:13.400 READ DMA EXT
  137. 25 00 08 7f 11 60 e0 00 00:01:09.300 READ DMA EXT
  138. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  139. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  140.  
  141. Error 260 occurred at disk power-on lifetime: 5339 hours (222 days + 11 hours)
  142. When the command that caused the error occurred, the device was active or idle.
  143.  
  144. After command completion occurred, registers were:
  145. ER ST SC SN CL CH DH
  146. -- -- -- -- -- -- --
  147. 40 51 08 7f 11 60 e0 Error: UNC 8 sectors at LBA = 0x0060117f = 6295935
  148.  
  149. Commands leading to the command that caused the error were:
  150. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  151. -- -- -- -- -- -- -- -- ---------------- --------------------
  152. 25 00 08 7f 11 60 e0 00 00:01:13.400 READ DMA EXT
  153. 25 00 08 7f 11 60 e0 00 00:01:09.300 READ DMA EXT
  154. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  155. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  156. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  157.  
  158. Error 259 occurred at disk power-on lifetime: 5339 hours (222 days + 11 hours)
  159. When the command that caused the error occurred, the device was active or idle.
  160.  
  161. After command completion occurred, registers were:
  162. ER ST SC SN CL CH DH
  163. -- -- -- -- -- -- --
  164. 40 51 08 7f 11 60 e0 Error: UNC 8 sectors at LBA = 0x0060117f = 6295935
  165.  
  166. Commands leading to the command that caused the error were:
  167. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  168. -- -- -- -- -- -- -- -- ---------------- --------------------
  169. 25 00 08 7f 11 60 e0 00 00:01:09.300 READ DMA EXT
  170. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  171. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  172. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  173. 25 00 08 77 11 60 e0 00 00:01:09.300 READ DMA EXT
  174.  
  175. SMART Self-test log structure revision number 1
  176. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  177. # 1 Short offline Completed without error 00% 0 -
  178.  
  179. SMART Selective self-test log data structure revision number 1
  180. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  181. 1 0 0 Not_testing
  182. 2 0 0 Not_testing
  183. 3 0 0 Not_testing
  184. 4 0 0 Not_testing
  185. 5 0 0 Not_testing
  186. Selective self-test flags (0x0):
  187. After scanning selected spans, do NOT read-scan remainder of disk.
  188. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!