Advertisement
Guest User

MX64W-A0 Log

a guest
Nov 25th, 2021
54
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Uncompressing Linux... done, booting the kernel.
  2. [ 0.000000] Booting Linux on physical CPU 0
  3. [ 0.000000] Linux version 3.4.111 (mtahmed@sf201.meraki.com) (gcc version 4.8.3 (GCC) ) #2 Fri Jul 6 13:34:46 PDT 2018
  4. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Meraki Wired-Arm-Nsp, model: Meraki wired-arm-nsp
  7. [ 0.000000] bootconsole [earlycon0] enabled
  8. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  9. [ 0.000000] BUG: mapping for 0x18000000 at 0xff000000 out of vmalloc space
  10. [ 0.000000] BUG: mapping for 0x19000000 at 0xff200000 out of vmalloc space
  11. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260080
  12. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ubi.mtd=ubi mem=0x3fff0000 earlyprintk loader=u-boot part=bootkernel2
  13. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  14. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  15. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  16. [ 0.000000] Memory: 1023MB = 1023MB total
  17. [ 0.000000] Memory: 1033284k/1033284k available, 15228k reserved, 0K highmem
  18. [ 0.000000] Virtual kernel memory layout:
  19. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  20. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  21. [ 0.000000] vmalloc : 0x80000000 - 0xff000000 (2032 MB)
  22. [ 0.000000] lowmem : 0x40000000 - 0x7fff0000 (1023 MB)
  23. [ 0.000000] modules : 0x3f000000 - 0x40000000 ( 16 MB)
  24. [ 0.000000] .text : 0x40008000 - 0x40310790 (3106 kB)
  25. [ 0.000000] .init : 0x40311000 - 0x405bf3b4 (2745 kB)
  26. [ 0.000000] .data : 0x405c0000 - 0x405e6588 ( 154 kB)
  27. [ 0.000000] .bss : 0x405e65ac - 0x40609e20 ( 143 kB)
  28. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  29. [ 0.000000] NR_IRQS:292
  30. [ 0.000000] Data abort at addr=0x0, fsr=0x1c06 ignored.
  31. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  32. [ 0.010000] Calibrating delay loop... 2393.70 BogoMIPS (lpj=11968512)
  33. [ 0.070000] pid_max: default: 32768 minimum: 301
  34. [ 0.070000] Mount-cache hash table entries: 512
  35. [ 0.080000] CPU: Testing write buffer coherency: ok
  36. [ 0.080000] Setting up static identity map for 0x60239b18 - 0x60239b70
  37. [ 0.090000] L310 cache controller enabled
  38. [ 0.090000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a150000, Cache size: 524288 B
  39. [ 0.100000] devtmpfs: initialized
  40. [ 0.110000] NET: Registered protocol family 16
  41. [ 0.110000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
  42. [ 0.120000] iproc gpiochip add GPIOA
  43. [ 0.120000] GPIOA:ioaddr ff000060
  44. [ 0.130000] GPIOA:intr_ioaddr ff000000 dmu_ioaddr ff020000
  45. [ 0.130000] gpiochip_add: registered GPIOs 32 to 35 on device: GPIOB
  46. [ 0.140000] iproc gpiochip add GPIOB
  47. [ 0.140000] GPIOB:ioaddr ff030000
  48. [ 0.150000] Warning: No reset pin specified in config
  49. [ 0.150000] request_idm_timeout_interrupts: 600 entry
  50. [ 0.160000] idm_timeout_handler: 340, 0 entry
  51. [ 0.160000] idm_timeout_handler: 585 exit
  52. [ 0.160000] request_idm_timeout_interrupts: 696 exit
  53. [ 0.170000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  54. [ 0.180000] hw-breakpoint: maximum watchpoint size is 4 bytes.
  55. [ 0.190000] bio: create slab <bio-0> at 0
  56. [ 0.190000] usbcore: registered new interface driver usbfs
  57. [ 0.200000] usbcore: registered new interface driver hub
  58. [ 0.200000] usbcore: registered new device driver usb
  59. [ 0.210000] i2c-gpio i2c-gpio.6: using pins 5 (SDA) and 4 (SCL)
  60. [ 0.210000] Switching to clocksource iproc_gtimer
  61. [ 0.220000] NET: Registered protocol family 2
  62. [ 0.230000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  63. [ 0.240000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  64. [ 0.250000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  65. [ 0.250000] TCP: Hash tables configured (established 131072 bind 65536)
  66. [ 0.260000] TCP: reno registered
  67. [ 0.260000] UDP hash table entries: 512 (order: 1, 8192 bytes)
  68. [ 0.270000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  69. [ 0.280000] NET: Registered protocol family 1
  70. [ 0.540000] PCIE0: LINKSTA reg 0xbe val 0x9012
  71. [ 0.540000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE0 link=1
  72. [ 0.570000] PCI host bridge to bus 0000:00
  73. [ 0.570000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  74. [ 0.580000] PCI: bus0: Fast back to back transfers disabled
  75. [ 0.580000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  76. [ 0.590000] PCI: bus1: Fast back to back transfers disabled
  77. [ 0.600000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  78. [ 0.600000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  79. [ 0.610000] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  80. [ 0.620000] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  81. [ 0.620000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
  82. [ 0.630000] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  83. [ 0.630000] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
  84. [ 0.890000] PCIE1: LINKSTA reg 0xbe val 0x9012
  85. [ 0.890000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE1 link=1
  86. [ 0.920000] PCI host bridge to bus 0001:00
  87. [ 0.920000] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
  88. [ 0.930000] PCI: bus0: Fast back to back transfers disabled
  89. [ 0.930000] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  90. [ 0.940000] PCI: bus1: Fast back to back transfers disabled
  91. [ 0.950000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  92. [ 0.950000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  93. [ 0.960000] PCIe map irq: 0001:00:00.00 slot 0, pin 1, irq: 169
  94. [ 0.970000] PCIe map irq: 0001:01:00.00 slot 0, pin 1, irq: 169
  95. [ 0.970000] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  96. [ 0.980000] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  97. [ 0.990000] pci 0001:00:00.0: PCI bridge to [bus 01-01]
  98. [ 0.990000] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  99. [ 1.000000] PCI: enabling device 0001:00:00.0 (0140 -> 0143)
  100. [ 1.250000] PCIE2: LINKSTA reg 0xbe val 0x1001
  101. [ 1.260000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, reg[0xde]=0x1, PCIE2 link=0
  102. [ 1.380000] pm_init: Initializing Power Management ....
  103. [ 1.390000] msgmni has been set to 2018
  104. [ 1.400000] io scheduler noop registered
  105. [ 1.400000] io scheduler deadline registered
  106. [ 1.400000] io scheduler cfq registered (default)
  107. [ 1.410000] iproc_pwmc_probe iobase ff031000 phys:18031000
  108. [ 1.410000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  109. [ 1.420000] 18000300.uart: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550A
  110. [ 1.430000] console [ttyS0] enabled, bootconsole disabled
  111. [ 1.430000] console [ttyS0] enabled, bootconsole disabled
  112. [ 1.440000] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  113. [ 1.450000] ONFI param page 0 valid
  114. [ 1.450000] ONFI flash detected
  115. [ 1.450000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron MT29F8G08ABACAWP)
  116. [ 1.460000] iproc_nand: heuristics exception detected, Micron MT29F8G08ABACA
  117. [ 1.470000] iproc_nand: following bootloader settings
  118. [ 1.470000] iproc_nand: 1024MiB total, 256KiB blocks, 4KiB pages, 27B OOB, 8-bit
  119. [ 1.480000] iproc_nand: user oob per page: 46 bytes (4 steps)
  120. [ 1.490000] Bad block table found at page 262080, version 0x01
  121. [ 1.490000] Bad block table found at page 262016, version 0x01
  122. [ 1.500000] Bad block table found at page 262080, version 0x01
  123. [ 1.510000] Bad block table found at page 262016, version 0x01
  124. [ 1.510000] Creating 6 MTD partitions on "nand_iproc.0":
  125. [ 1.520000] 0x000000000000-0x000000200000 : "U-boot"
  126. [ 1.520000] 0x000000100000-0x000000400000 : "bootkernel1"
  127. [ 1.530000] 0x000000400000-0x000000500000 : "senao_nvram"
  128. [ 1.540000] 0x000000500000-0x000000800000 : "bootkernel2"
  129. [ 1.540000] 0x000000800000-0x00003ff00000 : "ubi"
  130. [ 1.550000] 0x000000000000-0x00003ff00000 : "all"
  131. [ 1.550000] iproc_nand: NAND controller driver is loaded
  132. [ 1.560000] UBI: attaching mtd4 to ubi0
  133. [ 1.560000] UBI: physical eraseblock size: 262144 bytes (256 KiB)
  134. [ 1.570000] UBI: logical eraseblock size: 253952 bytes
  135. [ 1.570000] UBI: smallest flash I/O unit: 4096
  136. [ 1.580000] UBI: VID header offset: 4096 (aligned 4096)
  137. [ 1.580000] UBI: data offset: 8192
  138. [ 6.670000] UBI: max. sequence number: 1408817
  139. [ 6.690000] UBI: attached mtd4 to ubi0
  140. [ 6.690000] UBI: MTD device name: "ubi"
  141. [ 6.690000] UBI: MTD device size: 1015 MiB
  142. [ 6.700000] UBI: number of good PEBs: 4060
  143. [ 6.700000] UBI: number of bad PEBs: 0
  144. [ 6.710000] UBI: number of corrupted PEBs: 0
  145. [ 6.710000] UBI: max. allowed volumes: 128
  146. [ 6.720000] UBI: wear-leveling threshold: 4096
  147. [ 6.720000] UBI: number of internal volumes: 1
  148. [ 6.730000] UBI: number of user volumes: 5
  149. [ 6.730000] UBI: available PEBs: 1647
  150. [ 6.740000] UBI: total number of reserved PEBs: 2413
  151. [ 6.740000] UBI: number of PEBs reserved for bad PEB handling: 40
  152. [ 6.750000] UBI: max/mean erase counter: 365/348
  153. [ 6.750000] UBI: image sequence number: 451051978
  154. [ 6.760000] UBI: background thread "ubi_bgt0d" started, PID 251
  155. [ 6.760000] tun: Universal TUN/TAP device driver, 1.6
  156. [ 6.770000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  157. [ 6.780000] bcm5301x_gmac_init_module: NAPI2_POLL mode
  158. [ 6.780000] bcm5301x_gmac_probe enter name:bcmiproc-gmac0; id:0x0; unit:0
  159. [ 6.790000] NVRAM: map 0x1e0a0000
  160. [ 6.820000] et0: eth1addr not found, ignore it
  161. [ 6.820000] bcm5301x_gmac_probe enter name:bcmiproc-gmac1; id:0x0; unit:1
  162. [ 6.830000] et1: eth2addr not found, ignore it
  163. [ 6.830000] bcm5301x_gmac_probe enter name:bcmiproc-gmac2; id:0x0; unit:2
  164. [ 6.840000] si_doattach chipid: 0x3f00cf1e
  165. [ 6.840000] et2: base_addr (0x18024000) irq (181)
  166. [ 6.850000] etc_gmac_speed default GMAC2 speed: auto
  167. [ 6.850000] etc_attach() mdio_init_time = 5
  168. [ 6.860000] si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0xcf1c
  169. [ 6.870000] si_doattach chipid: 0x3f00cf1e
  170. [ 6.870000] si_attach socitype(0x3) chip(0xcf1e) chiprev(0x0) chippkg(0x0)
  171. [ 6.880000] et2: chipattach: phyaddr(0x1e)
  172. [ 6.880000] et2: chipattach: Calling robo attach
  173. [ 6.890000] bcm_robo_attach: devid32: 0x53025
  174. [ 6.950000] bcm_robo_enable_switch IPROC OTP is not configured, can not determine skuid
  175. [ 6.960000] bcm_robo_enable_switch Northstar Family chip
  176. [ 6.970000] bcm_robo_enable_switch Checking powered down port (0x0)
  177. [ 6.970000] eth0: Broadcom BCM5302x 10/100/1000 Mbps Ethernet Controller 6.30.40 (TOB) (r)
  178. [ 6.980000] eth_mac_proc_create: enter
  179. [ 6.990000]
  180. [ 6.990000] Creating fa bypass proc entry
  181. [ 6.990000] et_ctf_active enabled
  182. [ 7.000000] bcm5301x_gmac_probe enter name:bcmiproc-gmac3; id:0x0; unit:3
  183. [ 7.000000] et3: eth3addr not found, ignore it
  184. [ 7.010000] usbcore: registered new interface driver cdc_eem
  185. [ 7.010000] usbcore: registered new interface driver cdc_subset
  186. [ 7.020000] usbcore: registered new interface driver cdc_ncm
  187. [ 7.020000] usbcore: registered new interface driver cdc_acm
  188. [ 7.030000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  189. [ 7.040000] usbcore: registered new interface driver usbserial
  190. [ 7.040000] usbcore: registered new interface driver usbserial_generic
  191. [ 7.050000] USB Serial support registered for generic
  192. [ 7.060000] usbserial: USB Serial Driver core
  193. [ 7.060000] usbcore: registered new interface driver option
  194. [ 7.070000] USB Serial support registered for GSM modem (1-port)
  195. [ 7.070000] usbcore: registered new interface driver qcserial
  196. [ 7.080000] USB Serial support registered for Qualcomm USB modem
  197. [ 7.080000] usbcore: registered new interface driver sierra
  198. [ 7.090000] USB Serial support registered for Sierra USB modem
  199. [ 7.100000] input: gpio-buttons.5 as /devices/gpio-buttons.5/input/input0
  200. [ 7.100000] i2c /dev entries driver
  201. [ 7.110000] GENPLL[5] mdiv=12 rate=1500000000
  202. [ 7.120000] GENPLL[5] mdiv=12 rate=1500000000
  203. [ 7.120000] sp805-wdt sp805-wdt: registration successful
  204. [ 7.130000] usbcore: registered new interface driver usbhid
  205. [ 7.130000] usbhid: USB HID core driver
  206. [ 7.140000] meraki-config board-data.2: Meraki config device loaded
  207. [ 7.140000] TCP: cubic registered
  208. [ 7.150000] NET: Registered protocol family 17
  209. [ 7.150000] NET: Registered protocol family 15
  210. [ 7.150000] 8021q: 802.1Q VLAN Support v1.8
  211. [ 7.160000] Registering SWP/SWPB emulation handler
  212. [ 7.160000] devtmpfs: mounted
  213. [ 7.170000] Freeing init memory: 2744K
  214. [ 7.170000] Made it into bootsh: Jul 6 2018 13:15:54
  215. [ 7.180000] bootsh build 201807061333ga9614cc2M
  216. [ 7.320000] UBIFS: recovery needed
  217. [ 7.420000] iproc_nand: uncorrectable error at 0x168a4400
  218. [ 7.450000] iproc_nand: uncorrectable error at 0x168a4400
  219. [ 7.470000] iproc_nand: uncorrectable error at 0x168a4400
  220. [ 7.500000] iproc_nand: uncorrectable error at 0x168a4400
  221. [ 7.520000] UBI error: ubi_io_read: error -74 (ECC error) while reading 139264 bytes from PEB 1410:122880, read 139264 bytes
  222. [ 7.530000] UBIFS error (pid 1): ubifs_recover_leb: corrupt empty space LEB 297:114688, corruption starts at 26026
  223. [ 7.540000] UBIFS error (pid 1): ubifs_scanned_corruption: corruption at LEB 297:140714
  224. [ 7.550000] UBIFS error (pid 1): ubifs_recover_leb: LEB 297 scanning failed
  225. [ 7.550000] mount_ubifs: mounting ubifs storage: Structure needs cleaning
  226. [ 7.610000] do_platform_specific_late_setup_wired_arm_nsp: resetting wifi radios
  227. [ 7.620000] /init: opening /sys/class/gpio/gpio16/value failed!: No such file or directory
  228. [ 7.630000]
  229. [ 7.630000] !!!!! {/init} failed writing /sys/class/gpio/gpio16/value len 1 data: "0"
  230. [ 7.640000] /init: opening /sys/class/gpio/gpio17/value failed!: No such file or directory
  231. [ 7.650000]
  232. [ 7.650000] !!!!! {/init} failed writing /sys/class/gpio/gpio17/value len 1 data: "0"
  233. [ 7.970000] /init: opening /sys/class/gpio/gpio16/value failed!: No such file or directory
  234. [ 7.970000]
  235. [ 7.970000] !!!!! {/init} failed writing /sys/class/gpio/gpio16/value len 1 data: "1"
  236. [ 7.980000] /init: opening /sys/class/gpio/gpio17/value failed!: No such file or directory
  237. [ 7.990000]
  238. [ 7.990000] !!!!! {/init} failed writing /sys/class/gpio/gpio17/value len 1 data: "1"
  239. In manufacturing[ 8.050000] /init: FALSE
  240. : reading file /storage/config: No such file or directory
  241. In manufacturing: FALSE
  242. [ 12.390000] Mapping 26820608 bytes for /dev/mtdblock/part.safe
  243. [ 12.430000] Meraki-build is wired-14-38-202004272129-G64b92676-rel-poof
  244. cksum computed: 0x1245 given: 0x1245
  245. found valid board data at 0x0
  246. cksum computed: 0x1245 given: 0x1245
  247. found valid board data at 0x0
  248. Using itb config kingpin2g (wired-arm-nsp configuration)
  249. Description: wired-arm-nsp Kernel
  250. Description: wired-arm-nsp Ramdisk
  251. Description: wired-arm-nsp Device Tree 2GB
  252. [ 16.390000] Starting new kernel
  253. [ 16.390000] Bye!
  254. [ 0.000000] Booting Linux on physical CPU 0
  255. [ 0.000000] Linux version 3.4.113 (jenkins@dal248.meraki.com) (gcc version 4.8.3 (GCC) ) #3 SMP Wed May 6 15:36:32 PDT 2020
  256. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  257. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  258. [ 0.000000] Machine: Meraki Wired-Arm-Nsp, model: Meraki MX64
  259. [ 0.000000] bootconsole [earlycon0] enabled
  260. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  261. [ 0.000000] BUG: mapping for 0x18000000 at 0xff000000 out of vmalloc space
  262. [ 0.000000] BUG: mapping for 0x19000000 at 0xff200000 out of vmalloc space
  263. [ 0.000000] PERCPU: Embedded 7 pages/cpu @41017000 s5824 r8192 d14656 u32768
  264. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390128
  265. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ubi.mtd=ubi earlyprintk console=ttyS0,115200n8 earlyprintks
  266. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  267. [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
  268. [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
  269. [ 0.000000] Memory: 1535MB = 1535MB total
  270. [ 0.000000] Memory: 1536236k/1536236k available, 36564k reserved, 0K highmem
  271. [ 0.000000] Virtual kernel memory layout:
  272. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  273. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  274. [ 0.000000] vmalloc : 0xa0000000 - 0xff000000 (1520 MB)
  275. [ 0.000000] lowmem : 0x40000000 - 0x9fff0000 (1535 MB)
  276. [ 0.000000] modules : 0x3f000000 - 0x40000000 ( 16 MB)
  277. [ 0.000000] .text : 0x40008000 - 0x40378740 (3522 kB)
  278. [ 0.000000] .init : 0x40379000 - 0x4039c6c0 ( 142 kB)
  279. [ 0.000000] .data : 0x4039e000 - 0x403cc6e8 ( 186 kB)
  280. [ 0.000000] .bss : 0x403cc70c - 0x4040ced8 ( 258 kB)
  281. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  282. [ 0.000000] Hierarchical RCU implementation.
  283. [ 0.000000] NR_IRQS:292
  284. [ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms
  285. [ 0.004000] Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
  286. [ 0.024000] pid_max: default: 32768 minimum: 301
  287. [ 0.028000] Mount-cache hash table entries: 512
  288. [ 0.032000] CPU: Testing write buffer coherency: ok
  289. [ 0.036000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  290. [ 0.040000] smp_twd: clock not found: -2
  291. [ 0.044000] Calibrating local timer... 599.80MHz.
  292. [ 0.068000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  293. [ 0.072000] Setting up static identity map for 0x80291570 - 0x802915c8
  294. [ 0.076000] L310 cache controller enabled
  295. [ 0.080000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a150000, Cache size: 524288 B
  296. [ 0.088000] CPU1: Booted secondary processor
  297. [ 0.140000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  298. [ 0.140000] Brought up 2 CPUs
  299. [ 0.144000] SMP: Total of 2 processors activated (4780.03 BogoMIPS).
  300. [ 0.148000] devtmpfs: initialized
  301. [ 0.156000] NET: Registered protocol family 16
  302. [ 0.160000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
  303. [ 0.164000] iproc gpiochip add GPIOA
  304. [ 0.168000] GPIOA:ioaddr ff000060
  305. [ 0.172000] GPIOA:intr_ioaddr ff000000 dmu_ioaddr ff020000
  306. [ 0.176000] gpiochip_add: registered GPIOs 32 to 35 on device: GPIOB
  307. [ 0.180000] iproc gpiochip add GPIOB
  308. [ 0.184000] GPIOB:ioaddr ff030000
  309. [ 0.188000] request_idm_timeout_interrupts: 600 entry
  310. [ 0.192000] idm_timeout_handler: 340, 0 entry
  311. [ 0.196000] idm_timeout_handler: 585 exit
  312. [ 0.200000] request_idm_timeout_interrupts: 696 exit
  313. [ 0.204000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  314. [ 0.208000] hw-breakpoint: maximum watchpoint size is 4 bytes.
  315. [ 0.216000] bio: create slab <bio-0> at 0
  316. [ 0.220000] usbcore: registered new interface driver usbfs
  317. [ 0.224000] usbcore: registered new interface driver hub
  318. [ 0.228000] usbcore: registered new device driver usb
  319. [ 0.236000] i2c-gpio i2c-gpio.5: using pins 5 (SDA) and 4 (SCL)
  320. [ 0.240000] Switching to clocksource iproc_gtimer
  321. [ 0.248000] NET: Registered protocol family 2
  322. [ 0.256000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
  323. [ 0.260000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
  324. [ 0.268000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  325. [ 0.272000] TCP: Hash tables configured (established 262144 bind 65536)
  326. [ 0.276000] TCP: reno registered
  327. [ 0.280000] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  328. [ 0.284000] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  329. [ 0.288000] NET: Registered protocol family 1
  330. [ 0.292000] Unpacking initramfs...
  331. [ 8.128000] Freeing initrd memory: 18456K
  332. [ 8.380000] PCIE0: LINKSTA reg 0xbe val 0x9012
  333. [ 8.384000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE0 link=1
  334. [ 8.408000] PCI host bridge to bus 0000:00
  335. [ 8.412000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  336. [ 8.416000] PCI: bus0: Fast back to back transfers disabled
  337. [ 8.420000] PCI: bus1: Fast back to back transfers disabled
  338. [ 8.424000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  339. [ 8.428000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  340. [ 8.432000] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  341. [ 8.436000] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  342. [ 8.440000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
  343. [ 8.444000] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  344. [ 8.448000] PCI: enabling device 0000:00:00.0 (0146 -> 0147)
  345. [ 8.704000] PCIE1: LINKSTA reg 0xbe val 0x9012
  346. [ 8.708000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE1 link=1
  347. [ 8.728000] PCI host bridge to bus 0001:00
  348. [ 8.732000] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
  349. [ 8.736000] PCI: bus0: Fast back to back transfers disabled
  350. [ 8.740000] PCI: bus1: Fast back to back transfers disabled
  351. [ 8.744000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  352. [ 8.748000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  353. [ 8.752000] PCIe map irq: 0001:00:00.00 slot 0, pin 1, irq: 169
  354. [ 8.756000] PCIe map irq: 0001:01:00.00 slot 0, pin 1, irq: 169
  355. [ 8.760000] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  356. [ 8.764000] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  357. [ 8.768000] pci 0001:00:00.0: PCI bridge to [bus 01-01]
  358. [ 8.772000] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  359. [ 8.776000] PCI: enabling device 0001:00:00.0 (0146 -> 0147)
  360. [ 9.032000] PCIE2: LINKSTA reg 0xbe val 0x1001
  361. [ 9.036000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x1, reg[0xde]=0x1, PCIE2 link=0
  362. [ 9.060000] pm_init: Initializing Power Management ....
  363. [ 9.156000] msgmni has been set to 3036
  364. [ 9.164000] io scheduler noop registered
  365. [ 9.168000] io scheduler deadline registered
  366. [ 9.172000] io scheduler cfq registered (default)
  367. [ 9.176000] iproc_pwmc_probe iobase ff031000 phys:18031000
  368. [ 9.180000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  369. [ 9.188000] 18000300.uart: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550A
  370. [ 9.192000] console [ttyS0] enabled, bootconsole disabled
  371. [ 9.192000] console [ttyS0] enabled, bootconsole disabled
  372. [ 9.196000] Trying to register dev faulty etc
  373. [ 9.204000] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  374. [ 9.220000] ONFI param page 0 valid
  375. [ 9.224000] ONFI flash detected
  376. [ 9.224000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron MT29F8G08ABACAWP)
  377. [ 9.232000] iproc_nand: heuristics exception detected, Micron MT29F8G08ABACA
  378. [ 9.236000] iproc_nand: following bootloader settings
  379. [ 9.240000] iproc_nand: 1024MiB total, 256KiB blocks, 4KiB pages, 27B OOB, 8-bit
  380. [ 9.244000] iproc_nand: user oob per page: 46 bytes (4 steps)
  381. [ 9.248000] Bad block table found at page 262080, version 0x01
  382. [ 9.252000] Bad block table found at page 262016, version 0x01
  383. [ 9.260000] Bad block table found at page 262080, version 0x01
  384. [ 9.264000] Bad block table found at page 262016, version 0x01
  385. [ 9.268000] Creating 6 MTD partitions on "nand_iproc.0":
  386. [ 9.272000] 0x000000000000-0x000000200000 : "U-boot"
  387. [ 9.280000] 0x000000100000-0x000000400000 : "bootkernel1"
  388. [ 9.292000] 0x000000400000-0x000000500000 : "senao_nvram"
  389. [ 9.304000] 0x000000500000-0x000000800000 : "bootkernel2"
  390. [ 9.316000] 0x000000800000-0x00003ff00000 : "ubi"
  391. [ 9.324000] 0x000000000000-0x00003ff00000 : "all"
  392. [ 9.336000] iproc_nand: NAND controller driver is loaded
  393. [ 9.340000] UBI: attaching mtd4 to ubi0
  394. [ 9.344000] UBI: physical eraseblock size: 262144 bytes (256 KiB)
  395. [ 9.348000] UBI: logical eraseblock size: 253952 bytes
  396. [ 9.352000] UBI: smallest flash I/O unit: 4096
  397. [ 9.356000] UBI: VID header offset: 4096 (aligned 4096)
  398. [ 9.360000] UBI: data offset: 8192
  399. [ 14.524000] UBI: max. sequence number: 1408818
  400. [ 14.548000] UBI: attached mtd4 to ubi0
  401. [ 14.548000] UBI: MTD device name: "ubi"
  402. [ 14.552000] UBI: MTD device size: 1015 MiB
  403. [ 14.556000] UBI: number of good PEBs: 4060
  404. [ 14.560000] UBI: number of bad PEBs: 0
  405. [ 14.564000] UBI: number of corrupted PEBs: 0
  406. [ 14.568000] UBI: max. allowed volumes: 128
  407. [ 14.572000] UBI: wear-leveling threshold: 4096
  408. [ 14.576000] UBI: number of internal volumes: 1
  409. [ 14.580000] UBI: number of user volumes: 5
  410. [ 14.584000] UBI: available PEBs: 1647
  411. [ 14.588000] UBI: total number of reserved PEBs: 2413
  412. [ 14.592000] UBI: number of PEBs reserved for bad PEB handling: 40
  413. [ 14.596000] UBI: max/mean erase counter: 365/348
  414. [ 14.600000] UBI: image sequence number: 451051978
  415. [ 14.604000] UBI: background thread "ubi_bgt0d" started, PID 401
  416. [ 14.656000] tun: Universal TUN/TAP device driver, 1.6
  417. [ 14.660000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  418. [ 14.668000] bcm5301x_gmac_init_module: NAPI2_POLL mode
  419. [ 14.676000] bcm5301x_gmac_probe enter name:bcmiproc-gmac0; id:0x0; unit:0
  420. [ 14.680000] NVRAM: map 0x1e0a0000
  421. [ 14.712000] et0: eth1addr not found, ignore it
  422. [ 14.720000] bcm5301x_gmac_probe enter name:bcmiproc-gmac1; id:0x0; unit:1
  423. [ 14.724000] et1: eth2addr not found, ignore it
  424. [ 14.732000] bcm5301x_gmac_probe enter name:bcmiproc-gmac2; id:0x0; unit:2
  425. [ 14.740000] si_doattach chipid: 0x3f00cf1e
  426. [ 14.744000] et2: base_addr (0x18024000) irq (181)
  427. [ 14.748000] etc_gmac_speed default GMAC2 speed: auto
  428. [ 14.752000] etc_attach() mdio_init_time = 5
  429. [ 14.756000] si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0xcf1c
  430. [ 14.764000] si_doattach chipid: 0x3f00cf1e
  431. [ 14.768000] si_attach socitype(0x3) chip(0xcf1e) chiprev(0x0) chippkg(0x0)
  432. [ 14.776000] et2: chipattach: phyaddr(0x1e)
  433. [ 14.780000] et2: chipattach: Calling robo attach
  434. [ 14.788000] bcm_robo_attach: devid32: 0x53025
  435. [ 14.856000] bcm_robo_enable_switch IPROC OTP is not configured, can not determine skuid
  436. [ 14.864000] bcm_robo_enable_switch Northstar Family chip
  437. [ 14.872000] bcm_robo_enable_switch Checking powered down port (0x0)
  438. [ 14.880000] eth0: Broadcom BCM5302x 10/100/1000 Mbps Ethernet Controller 6.30.40 (TOB) (r)
  439. [ 14.884000] eth_mac_proc_create: enter
  440. [ 14.888000]
  441. [ 14.888000] Creating fa bypass proc entry
  442. [ 14.892000] et_ctf_active enabled
  443. [ 14.900000] bcm5301x_gmac_probe enter name:bcmiproc-gmac3; id:0x0; unit:3
  444. [ 14.904000] et3: eth3addr not found, ignore it
  445. [ 14.912000] PPP generic driver version 2.4.2
  446. [ 14.916000] PPP BSD Compression module registered
  447. [ 14.920000] PPP Deflate Compression module registered
  448. [ 14.924000] NET: Registered protocol family 24
  449. [ 14.932000] usbcore: registered new interface driver cdc_ether
  450. [ 14.936000] usbcore: registered new interface driver cdc_eem
  451. [ 14.944000] usbcore: registered new interface driver cdc_subset
  452. [ 14.948000] usbcore: registered new interface driver sierra_net
  453. [ 14.956000] usbcore: registered new interface driver cdc_ncm
  454. [ 14.960000] Initial usb2h clock is: 000000cd
  455. [ 14.964000] Initial usb2h clock now is: 000000cd
  456. [ 14.968000] Initial usb2_reset_state is: 00000000
  457. [ 14.976000] usbcore: registered new interface driver cdc_acm
  458. [ 14.980000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  459. [ 14.992000] usbcore: registered new interface driver usbserial
  460. [ 14.996000] usbserial: USB Serial Driver core
  461. [ 15.004000] usbcore: registered new interface driver option
  462. [ 15.008000] USB Serial support registered for GSM modem (1-port)
  463. [ 15.012000] usbcore: registered new interface driver qcserial
  464. [ 15.016000] USB Serial support registered for Qualcomm USB modem
  465. [ 15.020000] usbcore: registered new interface driver sierra
  466. [ 15.028000] USB Serial support registered for Sierra USB modem
  467. [ 15.032000] input: gpio-buttons.6 as /devices/gpio-buttons.6/input/input0
  468. [ 15.036000] i2c /dev entries driver
  469. [ 15.048000] GENPLL[5] mdiv=12 rate=1500000000
  470. [ 15.052000] GENPLL[5] mdiv=12 rate=1500000000
  471. [ 15.056000] sp805-wdt sp805-wdt: registration successful
  472. [ 15.080000] usbcore: registered new interface driver usbhid
  473. [ 15.084000] usbhid: USB HID core driver
  474. [ 15.092000] meraki-config board-data.2: Meraki config device loaded
  475. [ 15.100000] TCP: cubic registered
  476. [ 15.100000] Initializing XFRM netlink socket
  477. [ 15.104000] NET: Registered protocol family 17
  478. [ 15.112000] NET: Registered protocol family 15
  479. [ 15.116000] L2TP core driver, V2.0
  480. [ 15.120000] PPPoL2TP kernel driver, V2.0
  481. [ 15.124000] 8021q: 802.1Q VLAN Support v1.8
  482. [ 15.128000] Registering SWP/SWPB emulation handler
  483. [ 15.136000] devtmpfs: mounted
  484. [ 15.140000] Freeing init memory: 140K
  485. [ 15.152000] Made it into bootsh: May 6 2020 15:29:52
  486. [ 15.156000] bootsh build wired-14-38-202004272129-G64b92676-rel-poof
  487. [ 15.224000] /init: writing to fd 3 failed!: Device or resource busy
  488. [ 15.228000]
  489. [ 15.228000] !!!!! {/init} failed writing /sys/class/gpio/export errno 16 len 1 data: "6"
  490. [ 15.320000] UBIFS: recovery needed
  491. [ 15.424000] iproc_nand: uncorrectable error at 0x168a4400
  492. [ 15.452000] iproc_nand: uncorrectable error at 0x168a4400
  493. [ 15.476000] iproc_nand: uncorrectable error at 0x168a4400
  494. [ 15.500000] iproc_nand: uncorrectable error at 0x168a4400
  495. [ 15.524000] UBI error: ubi_io_read: error -74 (ECC error) while reading 139264 bytes from PEB 1410:122880, read 139264 bytes
  496. [ 15.528000] UBIFS error (pid 1): ubifs_recover_leb: corrupt empty space LEB 297:114688, corruption starts at 26026
  497. [ 15.532000] UBIFS error (pid 1): ubifs_scanned_corruption: corruption at LEB 297:140714
  498. [ 15.540000] UBIFS error (pid 1): ubifs_recover_leb: LEB 297 scanning failed
  499. [ 15.560000] mount_ubifs: mounting ubifs storage: Structure needs cleaning
  500. In manufacturing[ 15.620000] /init: FALSE
  501. In rma : mode: FALSE
  502. reading file /sys/class/gpio/gpio6/value: No such file or directory
  503. [ 15.632000]
  504. [ 15.632000] !!!!! {/init} reading /sys/class/gpio/gpio6/value failed [2]: No such file or directory
  505. init started: BusyBox v1.25.1 (2020-05-06 13:45:54 PDT)
  506. /bin/sh: syntax error: unexpected ")"
  507. WARNING! THIS CONSOLE IS LOGGED! UNAUTHORIZED ACCESS FORBIDDEN!
  508. <Meraki> [ 15.796000] sysctl: error: 'vm.extfrag_threshold' is an unknown key
  509. [ 15.820000] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
  510. [ 16.352000] device eth0 entered promiscuous mode
  511. [ 16.356000] Cannot change rx-checksumming
  512. [ 16.364000] Cannot change tx-checksumming
  513. [ 16.368000] Cannot change scatter-gather
  514. [ 16.372000] Cannot change tcp-segmentation-offload
  515. [ 16.380000] Cannot change rx-vlan-offload
  516. [ 16.388000] Cannot change tx-vlan-offload
  517. [ 16.712000] grep: /storage/config: No such file or directory
  518. [ 16.780000] /usr/bin/sync_log: Unknown file system:
  519. [ 16.784000] /usr/bin/sync_log: failed while checking for high frequency write support: Unknown error -1
  520. [ 16.816000] GENPLL[5] mdiv=12 rate=1500000000
  521. [ 16.820000] sysctl -w vm.panic_on_oom=2
  522. [ 16.828000] vm.panic_on_oom = 2
  523. [ 16.908000] click: starting router thread pid 873 (9f0c6500)
  524. [ 16.968000] elts_meraki: module license 'unspecified' taints kernel.
  525. [ 17.148000] Single synchronous check for reset
  526. [ 17.196000] GobiNet: 2013-10-08/NTGR_2.21
  527. [ 17.200000] usbcore: registered new interface driver GobiNet
  528. [ 17.224000] usbcore: registered new interface driver GobiSerial
  529. [ 17.228000] USB Serial support registered for GobiSerial
  530. [ 17.236000] GobiSerial: 2013-10-08/NTGR_2.12:GobiSerial
  531. [ 17.280000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  532. [ 17.288000] bcm-ehci bcm-ehci.0: bcm-ehci
  533. [ 17.292000] bcm-ehci bcm-ehci.0: new USB bus registered, assigned bus number 1
  534. [ 17.300000] busnum 1: ehci_halt() failed, err=-110
  535. [ 17.308000] bcm-ehci bcm-ehci.0: can't setup
  536. [ 17.312000] bcm-ehci bcm-ehci.0: USB bus 1 deregistered
  537. [ 17.316000] bcm-ehci bcm-ehci.0: usb_add_hcd failed
  538. [ 17.320000] bcm-ehci bcm-ehci.0: probe failed: -110
  539. [ 17.324000] bcm-ehci: probe of bcm-ehci.0 failed with error -110
  540. [ 17.348000] et2 Link Up: 0FD
  541. [ 17.356000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  542. [ 17.364000] bcm-ohci bcm-ohci.0: bcm-ohci
  543. [ 17.368000] bcm-ohci bcm-ohci.0: new USB bus registered, assigned bus number 1
  544. [ 17.376000] bcm-ohci bcm-ohci.0: irq 111, io mem 0xff02b000
  545. [ 17.440000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  546. [ 17.444000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  547. [ 17.452000] usb usb1: Product: bcm-ohci
  548. [ 17.456000] usb usb1: Manufacturer: Linux 3.4.113 ohci_hcd
  549. [ 17.460000] usb usb1: SerialNumber: bcm-ohci
  550. [ 17.468000] hub 1-0:1.0: USB hub found
  551. [ 17.472000] hub 1-0:1.0: 2 ports detected
  552. [ 17.476000] bcm-ohci bcm-ohci.0: probe done
  553. [ 17.532000] wl: module license 'Proprietary' taints kernel.
  554. [ 17.568000] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
  555. [ 17.620000] apr0v0: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.105_e1.4.1.5 (r485445)
  556. [ 17.628000] PCI: enabling device 0001:01:00.0 (0140 -> 0142)
  557. [ 17.684000] apr1v0: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.105_e1.4.1.5 (r485445)
  558. [ 17.876000]
  559. [ 17.884000] boot 1 build wired-14-38-202004272129-G64b92676-rel-poof board wired-arm-nsp mac E0:55:3D:8C:68:B0
  560. [ 17.896000] /usr/bin/snort-version
  561. [ 17.904000] Module: dummy .text=0x3f000000 .data=0x3f0003f4 .bss=
  562. [ 17.904000] Module: proclikefs .text=0x3f004000 .data= .bss=0x3f004b40
  563. [ 17.904000] Module: merakiclick .text=0x3f009000 .data=0x3f10b704 .bss=0x3f10b980
  564. [ 17.904000] Module: elts_meraki .text=0x3f214000 .data=0x3f5305d4 .bss=0x3f532bdc
  565. [ 17.904000] Module: GobiNet .text=0x3f725000 .data=0x3f72e588 .bss=0x3f72e7d8
  566. [ 17.904000] Module: GobiSerial .text=0x3f735000 .data=0x3f735e80 .bss=0x3f73634c
  567. [ 17.904000] Module: bcmmdio .text=0x3f73a000 .data=0x3f73a370 .bss=0x3f73a5b8
  568. [ 17.904000] Module: ehci_hcd .text=0x3f73e000 .data=0x3f74866c .bss=0x3f7488c0
  569. [ 17.904000] Module: ohci_hcd .text=0x3f750000 .data=0x3f756108 .bss=0x3f75633c
  570. [ 17.904000] Module: wl .text=0x3f75d000 .data=0x3fa967b8 .bss=0x3fb17c90
  571. [ 18.052000] ramoops: platform device not found, using module parameters
  572. [ 18.128000] phram: phram-oops device: 0x10000 at 0xdfff0000
  573. [ 18.192000] cksum computed: 0x1245 given: 0x1245
  574. [ 18.192000] found valid board data at 0x0
  575. [ 18.192000] cksum computed: 0x1245 given: 0x1245
  576. [ 18.192000] found valid board data at 0x0
  577. [ 20.896000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  578. [ 20.908000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  579. [ 20.916000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  580. [ 20.928000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  581. [ 20.940000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  582. [ 20.948000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  583. [ 20.960000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  584. [ 21.236000] wl0: _wl_add_meraki_monitor_if
  585. [ 21.596000] wl1: _wl_add_meraki_monitor_if
  586. [ 21.728000] chatter: to_bird :: ToHost: device 'bird' went down
  587. [ 21.744000] chatter: to_bird :: ToHost: device 'bird' came up
  588. [ 33.844000]
  589. [ 33.844000] !!!!! {/usr/bin/wired_brain} failed writing /click/mon0_decap/rogue_shootdown/entering_channel errno 2 len 1 data: "1"
  590. [ 33.848000]
  591. [ 33.848000] !!!!! {/usr/bin/wired_brain} failed writing /click/ap_steering/set_chan_phytype errno 2 len 11 data: "0 1 20 0 ht"
  592. [ 33.864000]
  593. [ 33.864000] !!!!! {/usr/bin/wired_brain} failed writing /click/mon1_decap/rogue_shootdown/entering_channel errno 2 len 2 data: "44"
  594. [ 33.868000]
  595. [ 33.868000] !!!!! {/usr/bin/wired_brain} failed writing /click/ap_steering/set_chan_phytype errno 2 len 13 data: "1 44 80 1 vht"
  596. [ 34.416000] chatter: _to_linux_test_client :: ToHost: device 'test_client' went down
  597. [ 35.384000]
  598. [ 35.384000] !!!!! {/usr/bin/wired_brain} failed writing /sys/devices/system/cpu/cpu1/online errno 22 len 1 data: "1"
  599. [ 35.512000]
  600. [ 35.512000] !!!!! {/usr/bin/config_updater} failsafe_mode "value='0' state='0' bootloop='0' ver='1' " ""
  601. [ 35.556000] chatter: big_acl :: BigACL: skipping undersized restore buffer (buf size: 0)
  602.  
Advertisement
Advertisement
Advertisement
RAW Paste Data Copied
Advertisement