Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ; generated by PrusaSlicer 2.5.0+win64 on 2022-11-22 at 13:25:30 UTC
- ;
- ; external perimeters extrusion width = 0.42mm
- ; perimeters extrusion width = 0.44mm
- ; infill extrusion width = 0.44mm
- ; solid infill extrusion width = 0.44mm
- ; top infill extrusion width = 0.40mm
- ; first layer extrusion width = 0.42mm
- M107
- ;TYPE:Custom
- M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
- M203 X500.00 Y500.00 Z20.00 E50.00 ;Setup machine max feedrate
- M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
- M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
- M220 S100 ;Reset Feedrate
- M221 S100 ;Reset Flowrate
- G90 ; use absolute coordinates
- M83 ; extruder relative mode
- M104 S205 ; set extruder temp
- M140 S60 ; set bed temp
- M190 S60 ; wait for bed temp
- M109 S205 ; wait for extruder temp
- ; Setup firmware retraction settings
- M207 F1800 S0.8 Z0
- M208 F1800 S0
- G28 ; home all
- M420 S1 Z2 ; Active mesh leveling
- G1 Z2 F240
- G1 X2 Y10 F3000
- G1 Z0.28 F240
- G92 E0
- G1 Y190 E15 F1500 ; intro line
- G1 X2.3 F5000
- G92 E0
- G1 Y10 E15 F1200 ; intro line
- G92 E0
- G21 ; set units to millimeters
- G90 ; use absolute coordinates
- M83 ; use relative distances for extrusion
- ; Filament gcode
- M107
- ;LAYER_CHANGE
- ;Z:0.2
- ;HEIGHT:0.2
- ;BEFORE_LAYER_CHANGE
- G92 E0
- ;0.2
- G1 E-.8 F1800
- G1 Z.2 F9000
- ;AFTER_LAYER_CHANGE
- ;0.2
- G1 X83.107 Y82.203
- G1 E.8 F1800
- M204 S500
- ;TYPE:Skirt/Brim
- ;WIDTH:0.42
- G1 F1200
- G1 X85 Y81.623 E.06207
- G1 X135 Y81.623 E1.56771
- G1 X136.583 Y82.017 E.05115
- G1 X137.797 Y83.107 E.05115
- G1 X138.377 Y85 E.06207
- G1 X138.377 Y135 E1.56771
- G1 X137.983 Y136.583 E.05115
- G1 X136.893 Y137.797 E.05115
- G1 X135 Y138.377 E.06207
- G1 X85 Y138.377 E1.56771
- G1 X83.417 Y137.983 E.05115
- G1 X82.203 Y136.893 E.05115
- G1 X81.623 Y135 E.06207
- G1 X81.623 Y85 E1.56771
- G1 X82.017 Y83.417 E.05115
- G1 X83.067 Y82.248 E.04927
- ; printing object 50x50 single layer.stl id:0 copy 0
- ;WIPE_START
- G1 F7200
- G1 X85 Y81.623 E-.48244
- G1 X86.169 Y81.623 E-.27756
- ;WIPE_END
- G1 E-.04 F1800
- G1 X86.064 Y86.064 F9000
- G1 E.8 F1800
- ;TYPE:Perimeter
- ;WIDTH:0.419999
- G1 F1200
- G1 X133.936 Y86.064 E1.50098
- G1 X133.936 Y133.936 E1.50098
- G1 X86.064 Y133.936 E1.50098
- G1 X86.064 Y86.124 E1.4991
- G1 X85.687 Y85.687 F9000
- G1 F1200
- G1 X134.313 Y85.687 E1.52463
- G1 X134.313 Y134.313 E1.52463
- G1 X85.687 Y134.313 E1.52463
- G1 X85.687 Y85.747 E1.52275
- G1 X85.31 Y85.31 F9000
- ;TYPE:External perimeter
- G1 F1200
- G1 X134.69 Y85.31 E1.54827
- G1 X134.69 Y134.69 E1.54827
- G1 X85.31 Y134.69 E1.54827
- G1 X85.31 Y85.37 E1.54639
- G1 X85.696 Y85.414 F9000
- ;WIPE_START
- G1 F7200
- G1 X88.51 Y85.366 E-.76
- ;WIPE_END
- G1 E-.04 F1800
- G1 X133.049 Y86.185 F9000
- G1 E.8 F1800
- ;TYPE:Solid infill
- ;WIDTH:0.421643
- G1 F1200
- G1 X133.646 Y86.781 E.02655
- G1 X133.646 Y87.316 E.01687
- G1 X132.684 Y86.354 E.04284
- G1 X132.148 Y86.354 E.01687
- G1 X133.646 Y87.852 E.06669
- G1 X133.646 Y88.388 E.01687
- G1 X131.612 Y86.354 E.09055
- G1 X131.077 Y86.354 E.01687
- G1 X133.646 Y88.923 E.1144
- G1 X133.646 Y89.459 E.01687
- G1 X130.541 Y86.354 E.13825
- G1 X130.006 Y86.354 E.01687
- G1 X133.646 Y89.994 E.16211
- G1 X133.646 Y90.53 E.01687
- G1 X129.47 Y86.354 E.18596
- G1 X128.934 Y86.354 E.01687
- G1 X133.646 Y91.066 E.20981
- G1 X133.646 Y91.601 E.01687
- G1 X128.399 Y86.354 E.23366
- G1 X127.863 Y86.354 E.01687
- G1 X133.646 Y92.137 E.25752
- G1 X133.646 Y92.672 E.01687
- G1 X127.328 Y86.354 E.28137
- G1 X126.792 Y86.354 E.01687
- G1 X133.646 Y93.208 E.30522
- G1 X133.646 Y93.744 E.01687
- G1 X126.256 Y86.354 E.32907
- G1 X125.721 Y86.354 E.01687
- G1 X133.646 Y94.279 E.35293
- G1 X133.646 Y94.815 E.01687
- G1 X125.185 Y86.354 E.37678
- G1 X124.65 Y86.354 E.01687
- G1 X133.646 Y95.35 E.40063
- G1 X133.646 Y95.886 E.01687
- G1 X124.114 Y86.354 E.42448
- G1 X123.578 Y86.354 E.01687
- G1 X133.646 Y96.422 E.44834
- G1 X133.646 Y96.957 E.01687
- G1 X123.043 Y86.354 E.47219
- G1 X122.507 Y86.354 E.01687
- G1 X133.646 Y97.493 E.49604
- G1 X133.646 Y98.028 E.01687
- G1 X121.972 Y86.354 E.5199
- G1 X121.436 Y86.354 E.01687
- G1 X133.646 Y98.564 E.54375
- G1 X133.646 Y99.1 E.01687
- G1 X120.9 Y86.354 E.5676
- G1 X120.365 Y86.354 E.01687
- G1 X133.646 Y99.635 E.59145
- G1 X133.646 Y100.171 E.01687
- G1 X119.829 Y86.354 E.61531
- G1 X119.294 Y86.354 E.01687
- G1 X133.646 Y100.706 E.63916
- G1 X133.646 Y101.242 E.01687
- G1 X118.758 Y86.354 E.66301
- G1 X118.222 Y86.354 E.01687
- G1 X133.646 Y101.778 E.68686
- G1 X133.646 Y102.313 E.01687
- G1 X117.687 Y86.354 E.71072
- G1 X117.151 Y86.354 E.01687
- G1 X133.646 Y102.849 E.73457
- G1 X133.646 Y103.384 E.01687
- G1 X116.616 Y86.354 E.75842
- G1 X116.08 Y86.354 E.01687
- G1 X133.646 Y103.92 E.78228
- G1 X133.646 Y104.456 E.01687
- G1 X115.544 Y86.354 E.80613
- G1 X115.009 Y86.354 E.01687
- G1 X133.646 Y104.991 E.82998
- G1 X133.646 Y105.527 E.01687
- G1 X114.473 Y86.354 E.85383
- G1 X113.938 Y86.354 E.01687
- G1 X133.646 Y106.062 E.87769
- G1 X133.646 Y106.598 E.01687
- G1 X113.402 Y86.354 E.90154
- G1 X112.867 Y86.354 E.01687
- G1 X133.646 Y107.133 E.92539
- G1 X133.646 Y107.669 E.01687
- G1 X112.331 Y86.354 E.94924
- G1 X111.795 Y86.354 E.01687
- G1 X133.646 Y108.205 E.9731
- G1 X133.646 Y108.74 E.01687
- G1 X111.26 Y86.354 E.99695
- G1 X110.724 Y86.354 E.01687
- G1 X133.646 Y109.276 E1.0208
- G1 X133.646 Y109.811 E.01687
- G1 X110.189 Y86.354 E1.04465
- G1 X109.653 Y86.354 E.01687
- G1 X133.646 Y110.347 E1.06851
- G1 X133.646 Y110.883 E.01687
- G1 X109.117 Y86.354 E1.09236
- G1 X108.582 Y86.354 E.01687
- G1 X133.646 Y111.418 E1.11621
- G1 X133.646 Y111.954 E.01687
- G1 X108.046 Y86.354 E1.14007
- G1 X107.511 Y86.354 E.01687
- G1 X133.646 Y112.489 E1.16392
- G1 X133.646 Y113.025 E.01687
- G1 X106.975 Y86.354 E1.18777
- G1 X106.439 Y86.354 E.01687
- G1 X133.646 Y113.561 E1.21162
- G1 X133.646 Y114.096 E.01687
- G1 X105.904 Y86.354 E1.23548
- G1 X105.368 Y86.354 E.01687
- G1 X133.646 Y114.632 E1.25933
- G1 X133.646 Y115.167 E.01687
- G1 X104.833 Y86.354 E1.28318
- G1 X104.297 Y86.354 E.01687
- G1 X133.646 Y115.703 E1.30703
- G1 X133.646 Y116.239 E.01687
- G1 X103.761 Y86.354 E1.33089
- G1 X103.226 Y86.354 E.01687
- G1 X133.646 Y116.774 E1.35474
- G1 X133.646 Y117.31 E.01687
- G1 X102.69 Y86.354 E1.37859
- G1 X102.155 Y86.354 E.01687
- G1 X133.646 Y117.845 E1.40245
- G1 X133.646 Y118.381 E.01687
- G1 X101.619 Y86.354 E1.4263
- G1 X101.083 Y86.354 E.01687
- G1 X133.646 Y118.917 E1.45015
- G1 X133.646 Y119.452 E.01687
- G1 X100.548 Y86.354 E1.474
- G1 X100.012 Y86.354 E.01687
- G1 X133.646 Y119.988 E1.49786
- G1 X133.646 Y120.523 E.01687
- G1 X99.477 Y86.354 E1.52171
- G1 X98.941 Y86.354 E.01687
- G1 X133.646 Y121.059 E1.54556
- G1 X133.646 Y121.595 E.01687
- G1 X98.405 Y86.354 E1.56941
- G1 X97.87 Y86.354 E.01687
- G1 X133.646 Y122.13 E1.59327
- G1 X133.646 Y122.666 E.01687
- G1 X97.334 Y86.354 E1.61712
- G1 X96.799 Y86.354 E.01687
- G1 X133.646 Y123.201 E1.64097
- G1 X133.646 Y123.737 E.01687
- G1 X96.263 Y86.354 E1.66482
- G1 X95.727 Y86.354 E.01687
- G1 X133.646 Y124.273 E1.68868
- G1 X133.646 Y124.808 E.01687
- G1 X95.192 Y86.354 E1.71253
- G1 X94.656 Y86.354 E.01687
- G1 X133.646 Y125.344 E1.73638
- G1 X133.646 Y125.879 E.01687
- G1 X94.121 Y86.354 E1.76024
- G1 X93.585 Y86.354 E.01687
- G1 X133.646 Y126.415 E1.78409
- G1 X133.646 Y126.951 E.01687
- G1 X93.049 Y86.354 E1.80794
- G1 X92.514 Y86.354 E.01687
- G1 X133.646 Y127.486 E1.83179
- G1 X133.646 Y128.022 E.01687
- G1 X91.978 Y86.354 E1.85565
- G1 X91.443 Y86.354 E.01687
- G1 X133.646 Y128.557 E1.8795
- G1 X133.646 Y129.093 E.01687
- G1 X90.907 Y86.354 E1.90335
- G1 X90.372 Y86.354 E.01687
- G1 X133.646 Y129.628 E1.9272
- G1 X133.646 Y130.164 E.01687
- G1 X89.836 Y86.354 E1.95106
- G1 X89.3 Y86.354 E.01687
- G1 X133.646 Y130.7 E1.97491
- G1 X133.646 Y131.235 E.01687
- G1 X88.765 Y86.354 E1.99876
- G1 X88.229 Y86.354 E.01687
- G1 X133.646 Y131.771 E2.02262
- G1 X133.646 Y132.306 E.01687
- G1 X87.694 Y86.354 E2.04647
- G1 X87.158 Y86.354 E.01687
- G1 X133.646 Y132.842 E2.07032
- G1 X133.646 Y133.378 E.01687
- G1 X86.622 Y86.354 E2.09417
- G1 X86.354 Y86.354 E.00843
- G1 X86.354 Y86.622 E.00843
- G1 X133.378 Y133.646 E2.09418
- G1 X132.842 Y133.646 E.01687
- G1 X86.354 Y87.158 E2.07032
- G1 X86.354 Y87.693 E.01687
- G1 X132.307 Y133.646 E2.04647
- G1 X131.771 Y133.646 E.01687
- G1 X86.354 Y88.229 E2.02262
- G1 X86.354 Y88.765 E.01687
- G1 X131.235 Y133.646 E1.99877
- G1 X130.7 Y133.646 E.01687
- G1 X86.354 Y89.3 E1.97491
- G1 X86.354 Y89.836 E.01687
- G1 X130.164 Y133.646 E1.95106
- G1 X129.629 Y133.646 E.01687
- G1 X86.354 Y90.371 E1.92721
- G1 X86.354 Y90.907 E.01687
- G1 X129.093 Y133.646 E1.90336
- G1 X128.557 Y133.646 E.01687
- G1 X86.354 Y91.443 E1.8795
- G1 X86.354 Y91.978 E.01687
- G1 X128.022 Y133.646 E1.85565
- G1 X127.486 Y133.646 E.01687
- G1 X86.354 Y92.514 E1.8318
- G1 X86.354 Y93.049 E.01687
- G1 X126.951 Y133.646 E1.80794
- G1 X126.415 Y133.646 E.01687
- G1 X86.354 Y93.585 E1.78409
- G1 X86.354 Y94.121 E.01687
- G1 X125.879 Y133.646 E1.76024
- G1 X125.344 Y133.646 E.01687
- G1 X86.354 Y94.656 E1.73639
- G1 X86.354 Y95.192 E.01687
- G1 X124.808 Y133.646 E1.71253
- G1 X124.273 Y133.646 E.01687
- G1 X86.354 Y95.727 E1.68868
- G1 X86.354 Y96.263 E.01687
- G1 X123.737 Y133.646 E1.66483
- G1 X123.201 Y133.646 E.01687
- G1 X86.354 Y96.799 E1.64098
- G1 X86.354 Y97.334 E.01687
- G1 X122.666 Y133.646 E1.61712
- G1 X122.13 Y133.646 E.01687
- G1 X86.354 Y97.87 E1.59327
- G1 X86.354 Y98.405 E.01687
- G1 X121.595 Y133.646 E1.56942
- G1 X121.059 Y133.646 E.01687
- G1 X86.354 Y98.941 E1.54557
- G1 X86.354 Y99.477 E.01687
- G1 X120.523 Y133.646 E1.52171
- G1 X119.988 Y133.646 E.01687
- G1 X86.354 Y100.012 E1.49786
- G1 X86.354 Y100.548 E.01687
- G1 X119.452 Y133.646 E1.47401
- G1 X118.917 Y133.646 E.01687
- G1 X86.354 Y101.083 E1.45015
- G1 X86.354 Y101.619 E.01687
- G1 X118.381 Y133.646 E1.4263
- G1 X117.845 Y133.646 E.01687
- G1 X86.354 Y102.155 E1.40245
- G1 X86.354 Y102.69 E.01687
- G1 X117.31 Y133.646 E1.3786
- G1 X116.774 Y133.646 E.01687
- G1 X86.354 Y103.226 E1.35474
- G1 X86.354 Y103.761 E.01687
- G1 X116.239 Y133.646 E1.33089
- G1 X115.703 Y133.646 E.01687
- G1 X86.354 Y104.297 E1.30704
- G1 X86.354 Y104.832 E.01687
- G1 X115.168 Y133.646 E1.28319
- G1 X114.632 Y133.646 E.01687
- G1 X86.354 Y105.368 E1.25933
- G1 X86.354 Y105.904 E.01687
- G1 X114.096 Y133.646 E1.23548
- G1 X113.561 Y133.646 E.01687
- G1 X86.354 Y106.439 E1.21163
- G1 X86.354 Y106.975 E.01687
- G1 X113.025 Y133.646 E1.18777
- G1 X112.49 Y133.646 E.01687
- G1 X86.354 Y107.51 E1.16392
- G1 X86.354 Y108.046 E.01687
- G1 X111.954 Y133.646 E1.14007
- G1 X111.418 Y133.646 E.01687
- G1 X86.354 Y108.582 E1.11622
- G1 X86.354 Y109.117 E.01687
- G1 X110.883 Y133.646 E1.09236
- G1 X110.347 Y133.646 E.01687
- G1 X86.354 Y109.653 E1.06851
- G1 X86.354 Y110.188 E.01687
- G1 X109.812 Y133.646 E1.04466
- G1 X109.276 Y133.646 E.01687
- G1 X86.354 Y110.724 E1.02081
- G1 X86.354 Y111.26 E.01687
- G1 X108.74 Y133.646 E.99695
- G1 X108.205 Y133.646 E.01687
- G1 X86.354 Y111.795 E.9731
- G1 X86.354 Y112.331 E.01687
- G1 X107.669 Y133.646 E.94925
- G1 X107.134 Y133.646 E.01687
- G1 X86.354 Y112.866 E.9254
- G1 X86.354 Y113.402 E.01687
- G1 X106.598 Y133.646 E.90154
- G1 X106.062 Y133.646 E.01687
- G1 X86.354 Y113.938 E.87769
- G1 X86.354 Y114.473 E.01687
- G1 X105.527 Y133.646 E.85384
- G1 X104.991 Y133.646 E.01687
- G1 X86.354 Y115.009 E.82998
- G1 X86.354 Y115.544 E.01687
- G1 X104.456 Y133.646 E.80613
- G1 X103.92 Y133.646 E.01687
- G1 X86.354 Y116.08 E.78228
- G1 X86.354 Y116.616 E.01687
- G1 X103.384 Y133.646 E.75843
- G1 X102.849 Y133.646 E.01687
- G1 X86.354 Y117.151 E.73457
- G1 X86.354 Y117.687 E.01687
- G1 X102.313 Y133.646 E.71072
- G1 X101.778 Y133.646 E.01687
- G1 X86.354 Y118.222 E.68687
- G1 X86.354 Y118.758 E.01687
- G1 X101.242 Y133.646 E.66302
- G1 X100.706 Y133.646 E.01687
- G1 X86.354 Y119.294 E.63916
- G1 X86.354 Y119.829 E.01687
- G1 X100.171 Y133.646 E.61531
- G1 X99.635 Y133.646 E.01687
- G1 X86.354 Y120.365 E.59146
- G1 X86.354 Y120.9 E.01687
- G1 X99.1 Y133.646 E.5676
- G1 X98.564 Y133.646 E.01687
- G1 X86.354 Y121.436 E.54375
- G1 X86.354 Y121.972 E.01687
- G1 X98.028 Y133.646 E.5199
- G1 X97.493 Y133.646 E.01687
- G1 X86.354 Y122.507 E.49605
- G1 X86.354 Y123.043 E.01687
- G1 X96.957 Y133.646 E.47219
- G1 X96.422 Y133.646 E.01687
- G1 X86.354 Y123.578 E.44834
- G1 X86.354 Y124.114 E.01687
- G1 X95.886 Y133.646 E.42449
- G1 X95.35 Y133.646 E.01687
- G1 X86.354 Y124.65 E.40064
- G1 X86.354 Y125.185 E.01687
- G1 X94.815 Y133.646 E.37678
- G1 X94.279 Y133.646 E.01687
- G1 X86.354 Y125.721 E.35293
- G1 X86.354 Y126.256 E.01687
- G1 X93.744 Y133.646 E.32908
- G1 X93.208 Y133.646 E.01687
- G1 X86.354 Y126.792 E.30523
- G1 X86.354 Y127.327 E.01687
- G1 X92.673 Y133.646 E.28137
- G1 X92.137 Y133.646 E.01687
- G1 X86.354 Y127.863 E.25752
- G1 X86.354 Y128.399 E.01687
- G1 X91.601 Y133.646 E.23367
- G1 X91.066 Y133.646 E.01687
- G1 X86.354 Y128.934 E.20981
- G1 X86.354 Y129.47 E.01687
- G1 X90.53 Y133.646 E.18596
- G1 X89.995 Y133.646 E.01687
- G1 X86.354 Y130.005 E.16211
- G1 X86.354 Y130.541 E.01687
- G1 X89.459 Y133.646 E.13826
- G1 X88.923 Y133.646 E.01687
- G1 X86.354 Y131.077 E.1144
- G1 X86.354 Y131.612 E.01687
- G1 X88.388 Y133.646 E.09055
- G1 X87.852 Y133.646 E.01687
- G1 X86.354 Y132.148 E.0667
- G1 X86.354 Y132.683 E.01687
- G1 X87.317 Y133.646 E.04285
- G1 X86.781 Y133.646 E.01687
- G1 X86.185 Y133.049 E.02655
- ; stop printing object 50x50 single layer.stl id:0 copy 0
- ;WIPE_START
- G1 F7200;_WIPE
- G1 X86.781 Y133.646 E-.20023
- G1 F7200;_WIPE
- G1 X87.317 Y133.646 E-.1272
- G1 F7200;_WIPE
- G1 X86.354 Y132.683 E-.32313
- G1 F7200;_WIPE
- G1 X86.354 Y132.223 E-.10943
- ;WIPE_END
- G1 E-.04 F1800
- M107
- ;TYPE:Custom
- ; Filament-specific end gcode
- ;END gcode for filament
- G1 Z2.2 F600 ; Move print head up
- G1 X5 Y170 F9000 ; present print
- G1 Z70.2 F600 ; Move print head further up
- M140 S0 ; turn off heatbed
- M104 S0 ; turn off temperature
- M107 ; turn off fan
- M84 X Y E ; disable motors
- ; filament used [mm] = 214.14
- ; filament used [cm3] = 0.52
- ; filament used [g] = 0.64
- ; filament cost = 0.01
- ; total filament used [g] = 0.64
- ; total filament cost = 0.01
- ; estimated printing time (normal mode) = 6m 12s
- ; prusaslicer_config = begin
- ; avoid_crossing_perimeters = 0
- ; avoid_crossing_perimeters_max_detour = 0
- ; bed_custom_model =
- ; bed_custom_texture =
- ; bed_shape = 5x0,215x0,215x220,5x220
- ; bed_temperature = 60
- ; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}\n\n
- ; between_objects_gcode =
- ; bottom_fill_pattern = monotonic
- ; bottom_solid_layers = 4
- ; bottom_solid_min_thickness = 0
- ; bridge_acceleration = 250
- ; bridge_angle = 0
- ; bridge_fan_speed = 100
- ; bridge_flow_ratio = 0.95
- ; bridge_speed = 25
- ; brim_separation = 0
- ; brim_type = outer_only
- ; brim_width = 0
- ; clip_multipart_objects = 1
- ; color_change_gcode = M600
- ; compatible_printers_condition_cummulative = "printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4";printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
- ; complete_objects = 0
- ; cooling = 1
- ; cooling_tube_length = 5
- ; cooling_tube_retraction = 91.5
- ; default_acceleration = 500
- ; default_filament_profile = "Generic PLA @CREALITY"
- ; default_print_profile = "0.16 mm OPTIMAL (0.4 mm nozzle) @CREALITY"
- ; deretract_speed = 30
- ; disable_fan_first_layers = 1
- ; dont_support_bridges = 1
- ; draft_shield = disabled
- ; duplicate_distance = 6
- ; elefant_foot_compensation = 0.1
- ; end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
- ; end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
- ; ensure_vertical_shell_thickness = 1
- ; external_perimeter_extrusion_width = 0.42
- ; external_perimeter_speed = 25
- ; external_perimeters_first = 0
- ; extra_loading_move = -2
- ; extra_perimeters = 0
- ; extruder_clearance_height = 34
- ; extruder_clearance_radius = 47
- ; extruder_colour = #FCE94F
- ; extruder_offset = 0x0
- ; extrusion_axis = E
- ; extrusion_multiplier = 1
- ; extrusion_width = 0.44
- ; fan_always_on = 1
- ; fan_below_layer_time = 100
- ; filament_colour = #DDDDDD
- ; filament_cooling_final_speed = 3.4
- ; filament_cooling_initial_speed = 2.2
- ; filament_cooling_moves = 4
- ; filament_cost = 20
- ; filament_density = 1.24
- ; filament_diameter = 1.75
- ; filament_load_time = 0
- ; filament_loading_speed = 28
- ; filament_loading_speed_start = 3
- ; filament_max_volumetric_speed = 15
- ; filament_minimal_purge_on_wipe_tower = 15
- ; filament_notes = ""
- ; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- ; filament_settings_id = "Eryone PLA"
- ; filament_soluble = 0
- ; filament_spool_weight = 0
- ; filament_toolchange_delay = 0
- ; filament_type = PLA
- ; filament_unload_time = 0
- ; filament_unloading_speed = 90
- ; filament_unloading_speed_start = 100
- ; filament_vendor = Generic
- ; fill_angle = 45
- ; fill_density = 15%
- ; fill_pattern = grid
- ; first_layer_acceleration = 0
- ; first_layer_acceleration_over_raft = 0
- ; first_layer_bed_temperature = 60
- ; first_layer_extrusion_width = 0.42
- ; first_layer_height = 0.2
- ; first_layer_speed = 20
- ; first_layer_speed_over_raft = 30
- ; first_layer_temperature = 205
- ; full_fan_speed_layer = 0
- ; fuzzy_skin = none
- ; fuzzy_skin_point_dist = 0.8
- ; fuzzy_skin_thickness = 0.3
- ; gap_fill_enabled = 1
- ; gap_fill_speed = 30
- ; gcode_comments = 0
- ; gcode_flavor = marlin
- ; gcode_label_objects = 1
- ; gcode_resolution = 0.0125
- ; gcode_substitutions =
- ; high_current_on_filament_swap = 0
- ; host_type = octoprint
- ; infill_acceleration = 0
- ; infill_anchor = 600%
- ; infill_anchor_max = 50
- ; infill_every_layers = 1
- ; infill_extruder = 1
- ; infill_extrusion_width = 0.44
- ; infill_first = 0
- ; infill_only_where_needed = 0
- ; infill_overlap = 23%
- ; infill_speed = 50
- ; inherits_cummulative = ;"Generic PLA @CREALITY";"Creality Ender-3 S1 (0.4 mm nozzle)"
- ; interface_shells = 0
- ; ironing = 0
- ; ironing_flowrate = 15%
- ; ironing_spacing = 0.1
- ; ironing_speed = 15
- ; ironing_type = top
- ; layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
- ; layer_height = 0.2
- ; machine_limits_usage = time_estimate_only
- ; machine_max_acceleration_e = 5000
- ; machine_max_acceleration_extruding = 500
- ; machine_max_acceleration_retracting = 1000
- ; machine_max_acceleration_travel = 500
- ; machine_max_acceleration_x = 500
- ; machine_max_acceleration_y = 500
- ; machine_max_acceleration_z = 100
- ; machine_max_feedrate_e = 60
- ; machine_max_feedrate_x = 500
- ; machine_max_feedrate_y = 500
- ; machine_max_feedrate_z = 10
- ; machine_max_jerk_e = 5
- ; machine_max_jerk_x = 8
- ; machine_max_jerk_y = 8
- ; machine_max_jerk_z = 0.4
- ; machine_min_extruding_rate = 0
- ; machine_min_travel_rate = 0
- ; max_fan_speed = 100
- ; max_layer_height = 0.32
- ; max_print_height = 270
- ; max_print_speed = 100
- ; max_volumetric_extrusion_rate_slope_negative = 0
- ; max_volumetric_extrusion_rate_slope_positive = 0
- ; max_volumetric_speed = 0
- ; min_bead_width = 85%
- ; min_fan_speed = 100
- ; min_feature_size = 25%
- ; min_layer_height = 0.08
- ; min_print_speed = 15
- ; min_skirt_length = 4
- ; mmu_segmented_region_max_width = 0
- ; notes =
- ; nozzle_diameter = 0.4
- ; only_retract_when_crossing_perimeters = 0
- ; ooze_prevention = 0
- ; output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
- ; overhangs = 0
- ; parking_pos_retraction = 92
- ; pause_print_gcode = M25 ; pause print
- ; perimeter_acceleration = 0
- ; perimeter_extruder = 1
- ; perimeter_extrusion_width = 0.44
- ; perimeter_generator = arachne
- ; perimeter_speed = 40
- ; perimeters = 3
- ; physical_printer_settings_id =
- ; post_process =
- ; print_settings_id = 0.20 mm NORMAL (0.4 mm nozzle) @CREALITY
- ; printer_model = ENDER3S1
- ; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1
- ; printer_settings_id = Creality Ender-3 S1 pro firmware
- ; printer_technology = FFF
- ; printer_variant = 0.4
- ; printer_vendor =
- ; raft_contact_distance = 0.1
- ; raft_expansion = 1.5
- ; raft_first_layer_density = 90%
- ; raft_first_layer_expansion = 3
- ; raft_layers = 0
- ; remaining_times = 0
- ; resolution = 0
- ; retract_before_travel = 1
- ; retract_before_wipe = 0%
- ; retract_layer_change = 1
- ; retract_length = 0.8
- ; retract_length_toolchange = 1
- ; retract_lift = 0
- ; retract_lift_above = 0.2
- ; retract_lift_below = 0
- ; retract_restart_extra = 0
- ; retract_restart_extra_toolchange = 0
- ; retract_speed = 30
- ; seam_position = nearest
- ; silent_mode = 0
- ; single_extruder_multi_material = 0
- ; single_extruder_multi_material_priming = 0
- ; skirt_distance = 3
- ; skirt_height = 2
- ; skirts = 1
- ; slice_closing_radius = 0.049
- ; slicing_mode = regular
- ; slowdown_below_layer_time = 20
- ; small_perimeter_speed = 25
- ; solid_infill_below_area = 0
- ; solid_infill_every_layers = 0
- ; solid_infill_extruder = 1
- ; solid_infill_extrusion_width = 0.44
- ; solid_infill_speed = 40
- ; spiral_vase = 0
- ; standby_temperature_delta = -5
- ; start_filament_gcode = "; Filament gcode\n"
- ; start_gcode = M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z20.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n; Setup firmware retraction settings\nM207 F{ retract_speed[0] * 60} S[retract_length_0] Z[retract_lift_0]\nM208 F{ deretract_speed[0] * 60} S[retract_restart_extra_0]\nG28 ; home all\nM420 S1 Z2 ; Active mesh leveling\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
- ; support_material = 0
- ; support_material_angle = 0
- ; support_material_auto = 1
- ; support_material_bottom_contact_distance = 0
- ; support_material_bottom_interface_layers = -1
- ; support_material_buildplate_only = 0
- ; support_material_closing_radius = 2
- ; support_material_contact_distance = 0.15
- ; support_material_enforce_layers = 0
- ; support_material_extruder = 0
- ; support_material_extrusion_width = 0.36
- ; support_material_interface_contact_loops = 0
- ; support_material_interface_extruder = 0
- ; support_material_interface_layers = 2
- ; support_material_interface_pattern = rectilinear
- ; support_material_interface_spacing = 0.2
- ; support_material_interface_speed = 100%
- ; support_material_pattern = rectilinear
- ; support_material_spacing = 1
- ; support_material_speed = 40
- ; support_material_style = grid
- ; support_material_synchronize_layers = 0
- ; support_material_threshold = 40
- ; support_material_with_sheath = 0
- ; support_material_xy_spacing = 60%
- ; temperature = 195
- ; template_custom_gcode =
- ; thick_bridges = 1
- ; thin_walls = 0
- ; threads = 12
- ; thumbnails =
- ; thumbnails_format = PNG
- ; toolchange_gcode =
- ; top_fill_pattern = monotonic
- ; top_infill_extrusion_width = 0.4
- ; top_solid_infill_speed = 30
- ; top_solid_layers = 5
- ; top_solid_min_thickness = 0
- ; travel_speed = 150
- ; travel_speed_z = 0
- ; use_firmware_retraction = 0
- ; use_relative_e_distances = 1
- ; use_volumetric_e = 0
- ; variable_layer_height = 1
- ; wall_distribution_count = 1
- ; wall_transition_angle = 10
- ; wall_transition_filter_deviation = 25%
- ; wall_transition_length = 100%
- ; wipe = 1
- ; wipe_into_infill = 0
- ; wipe_into_objects = 0
- ; wipe_tower = 0
- ; wipe_tower_bridging = 10
- ; wipe_tower_brim_width = 2
- ; wipe_tower_no_sparse_layers = 0
- ; wipe_tower_rotation_angle = 0
- ; wipe_tower_width = 60
- ; wipe_tower_x = 170
- ; wipe_tower_y = 140
- ; wiping_volumes_extruders = 70,70
- ; wiping_volumes_matrix = 0
- ; xy_size_compensation = 0
- ; z_offset = 0
- ; prusaslicer_config = end
Add Comment
Please, Sign In to add comment