BBAI cape overlay not working - 6/16/20

U-Boot 2019.07-rc4-00001-g607b5b738b (Jul 06 2019 - 21:01:15 -0500), Build: jenkins-github_B7

CPU  : DRA752-GP ES2.0
Model: BeagleBoard.org BeagleBone AI
Board: BeagleBone AI REV A
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
CTRL_CORE_PAD_I2C1_SDA:    0x00060000
CTRL_CORE_PAD_I2C1_SCL:    0x00060000
CTRL_CORE_PAD_GPMC_A0:     0x00060007
CTRL_CORE_PAD_GPMC_A1:     0x00060007
CTRL_CORE_PAD_VIN2A_D4:    0x0005000f
CTRL_CORE_PAD_VIN2A_D5:    0x0005000f
CM_L4PER_GPIO7_CLKCTRL:    0x00000001
CM_L4PER_I2C1_CLKCTRL:     0x00000002
CM_L4PER_I2C4_CLKCTRL:     0x00000002
CM_L4PER_L4_PER1_CLKCTRL   0x00000001
PM_L4PER_I2C1_WKDEP        0x0000b000
RM_L4PER_I2C1_CONTEXT      0x00000002
PM_L4PER_I2C4_WKDEP        0x0000b000
RM_L4PER_I2C4_CONTEXT      0x00000001
BeagleBone: cape eeprom: i2c_probe: 0x54
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x55
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x56
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
BeagleBone: cape eeprom: i2c_probe: 0x57
Checking (ret 1 bus works) I2C1 bus. ret 1
Checking (ret 1 bus works) I2C4 bus. ret 1
Net:
Warning: ethernet@48484000 using MAC address from ROM
eth0: ethernet@48484000
Press SPACE to abort autoboot in 1 seconds
usb_boot is currently disabled
scsi_boot is currently disabled
switch to partitions #0, OK
mmc0 is current device

Partition Map for MMC device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     8192            11051008        27a9b061-01     83 Boot
Scanning mmc device 0
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
586 bytes read in 1 ms (572.3 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt ...
debug: [uname_r=4.14.108-ti-r131] ...
loading /boot/vmlinuz-4.14.108-ti-r131 ...
9647776 bytes read in 831 ms (11.1 MiB/s)
loading /boot/dtbs/4.14.108-ti-r131/am5729-beagleboneai.dtb ...
150333 bytes read in 18 ms (8 MiB/s)
uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable...
loading /boot/initrd.img-4.14.108-ti-r131 ...
7323654 bytes read in 631 ms (11.1 MiB/s)
debug: [console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool.
debug: [bootz 0x82000000 0x88080000:6fc006 0x88000000] ...
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8f903000, end 8ffff006 ... OK
   Loading Device Tree to 8f8db000, end 8f902b3c ... OK

Starting kernel ...

[    0.002583] /cpus/cpu@0 missing clock-frequency property
[    0.002606] /cpus/cpu@1 missing clock-frequency property
[    0.403446] omap-mailbox 4a0f4000.mailbox: no available mbox devices found
[    0.403515] omap-mailbox 4883a000.mailbox: no available mbox devices found
[    0.403580] omap-mailbox 4883c000.mailbox: no available mbox devices found
[    0.403644] omap-mailbox 4883e000.mailbox: no available mbox devices found
[    0.404260] omap-mailbox 48844000.mailbox: no available mbox devices found
[    0.404325] omap-mailbox 48846000.mailbox: no available mbox devices found
[    0.404389] omap-mailbox 4885e000.mailbox: no available mbox devices found
[    0.404451] omap-mailbox 48860000.mailbox: no available mbox devices found
[    0.404512] omap-mailbox 48862000.mailbox: no available mbox devices found
[    0.404575] omap-mailbox 48864000.mailbox: no available mbox devices found
[    0.404636] omap-mailbox 48802000.mailbox: no available mbox devices found
[    0.952196] sdhci-omap 4809c000.mmc: failed to set system capabilities
[    0.959455] sdhci-omap 480b4000.mmc: failed to set system capabilities
[    0.969444] tpd12s015 encoder@0: failed to find video source
[    0.975478] connector-hdmi connector@0: failed to find video source
[    1.104297] dwc3 488d0000.usb: failed to initialize core
[    1.139093] omap_voltage_late_init: Voltage driver support not added
[    1.264093] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_1_8v mode
[    1.270812] sdhci-omap 4809c000.mmc: no pinctrl state for hs200_1_8v mode
[    1.431482] omapdss error: HDMI I2C Master Error
[    2.495290] omapdss error: HDMI I2C Master Error
rootfs: clean, 123672/345376 files, 868509/1381376 blocks
[    6.747892] cpu cpu0: _get_optimal_vdd_voltage: Failed optimized voltage match for 860000
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started Serial Getty on ttyS0.

Debian GNU/Linux 10 beaglebone ttyS0

BeagleBoard.org Debian Buster IoT TIDL Image 2020-04-06

Support: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

default username:password is [debian:temppwd]

beaglebone login: root
Password:
Last login: Fri Jun 12 20:28:33 UTC 2020 on ttyS0

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@beaglebone:~# cd /proc/device-tree/chosen/
root@beaglebone:/proc/device-tree/chosen# ls
base_dtb            bootargs          linux,initrd-start  stdout-path
base_dtb_timestamp  linux,initrd-end  name






root@beaglebone:/proc/device-tree/chosen# cd /opt/scripts/tools/
root@beaglebone:/opt/scripts/tools# ./version.sh
git:/opt/scripts/:[b39ec679648a6be8f25f48bd1c9784c1fc5a0c46]
model:[BeagleBoard.org_BeagleBone_AI]
dogtag:[BeagleBoard.org Debian Buster IoT TIDL Image 2020-04-06]
UBOOT: Booted Device-Tree:[am5729-beagleboneai.dts]
kernel:[4.14.108-ti-r131]
nodejs:[v10.15.2]
/boot/uEnv.txt Settings:
pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>]
pkg:[bb-cape-overlays]:[4.14.20200403.0-0rcnee0~buster+20200403]
pkg:[bb-wl18xx-firmware]:[1.20200322.0-0rcnee0~buster+20200322]
pkg:[kmod]:[26-1]
pkg:[librobotcontrol]:[1.0.4-git20190227.1-0rcnee0~buster+20190327]
pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-]
cmdline:[console=ttyS0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_poo]
dmesg | grep remote
[   11.913204] remoteproc remoteproc0: 58820000.ipu is available
[   11.952371] remoteproc remoteproc1: 55020000.ipu is available
[   11.979435] remoteproc remoteproc2: 40800000.dsp is available
[   12.025080] remoteproc remoteproc3: 41000000.dsp is available
[   12.630780] remoteproc remoteproc1: powering up 55020000.ipu
[   12.630827] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3751356
[   12.991248] remoteproc remoteproc1: registered virtio0 (type 7)
[   12.991272] remoteproc remoteproc1: remote processor 55020000.ipu is now up
[   14.117100] remoteproc remoteproc0: powering up 58820000.ipu
[   14.117147] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 7051536
[   14.175329] remoteproc remoteproc0: registered virtio1 (type 7)
[   14.175354] remoteproc remoteproc0: remote processor 58820000.ipu is now up
[   14.263517] remoteproc remoteproc3: powering up 41000000.dsp
[   14.263571] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 21014532
[   14.288939] remoteproc remoteproc2: powering up 40800000.dsp
[   14.289211] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 21014532
[   14.343074] Modules linked in: omap_remoteproc virtio_rpmsg_bus rpmsg_core usb_f_ecm usb_)
[   14.344397] Modules linked in: omap_remoteproc virtio_rpmsg_bus rpmsg_core usb_f_ecm usb_)
[   14.346562] Modules linked in: omap_remoteproc virtio_rpmsg_bus rpmsg_core usb_f_ecm usb_)
[   14.468382] remoteproc remoteproc3: registered virtio2 (type 7)
[   14.468407] remoteproc remoteproc3: remote processor 41000000.dsp is now up
[   14.523686] remoteproc remoteproc2: registered virtio3 (type 7)
[   14.523710] remoteproc remoteproc2: remote processor 40800000.dsp is now up
[   31.410483] remoteproc remoteproc4: 4b234000.pru is available
[   31.411939] remoteproc remoteproc5: 4b238000.pru is available
[   31.413281] remoteproc remoteproc6: 4b2b4000.pru is available
[   31.439718] remoteproc remoteproc7: 4b2b8000.pru is available
dmesg | grep pru
[   24.881097] pruss_uio_shmem 4b200000.pruss_shmem: Allocating gdev
[   24.881124] pruss_uio_shmem 4b200000.pruss_shmem: Allocating info
[   24.881145] pruss_uio_shmem 4b200000.pruss_shmem: Requesting resource
[   24.881255] pruss_uio_shmem 4b200000.pruss_shmem: Mapping resource
[   24.881637] pruss_uio_shmem 4b200000.pruss_shmem: Registering with uio driver
[   24.905417] pruss_uio_shmem 4b200000.pruss_shmem: Saving platform data
[   24.906939] pruss_uio_shmem 4b280000.pruss_shmem: Allocating gdev
[   24.906970] pruss_uio_shmem 4b280000.pruss_shmem: Allocating info
[   24.906992] pruss_uio_shmem 4b280000.pruss_shmem: Requesting resource
[   24.907052] pruss_uio_shmem 4b280000.pruss_shmem: Mapping resource
[   24.907453] pruss_uio_shmem 4b280000.pruss_shmem: Registering with uio driver
[   24.910607] pruss_uio_shmem 4b280000.pruss_shmem: Saving platform data
[   30.755246] pruss 4b200000.pruss: creating PRU cores and other child platform devices
[   30.775132] pruss 4b280000.pruss: creating PRU cores and other child platform devices
[   31.410483] remoteproc remoteproc4: 4b234000.pru is available
[   31.410695] pru-rproc 4b234000.pru: PRU rproc node /ocp/pruss_soc_bus@4b226004/pruss@0/pry
[   31.411939] remoteproc remoteproc5: 4b238000.pru is available
[   31.412161] pru-rproc 4b238000.pru: PRU rproc node /ocp/pruss_soc_bus@4b226004/pruss@0/pry
[   31.413281] remoteproc remoteproc6: 4b2b4000.pru is available
[   31.413455] pru-rproc 4b2b4000.pru: PRU rproc node /ocp/pruss_soc_bus@4b2a6004/pruss@0/pry
[   31.439718] remoteproc remoteproc7: 4b2b8000.pru is available
[   31.439918] pru-rproc 4b2b8000.pru: PRU rproc node /ocp/pruss_soc_bus@4b2a6004/pruss@0/pry
dmesg | grep pinctrl-single
[    0.848085] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128
dmesg | grep gpio-of-helper
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END









root@beaglebone:/opt/scripts/tools# cat /boot/uEnv.txt
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0

uname_r=4.14.108-ti-r131
#uuid=
#dtb=am5729-beaglebonai-custom.dtb
uboot_overlay_addr0=BBAI_BB-BONE-LCD7-01-00A3.dtbo
cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet

#In the event of edid real failures, uncomment this next line:
#cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet video=HDMI-A-1:10e

##enable x15: eMMC Flasher:
##make sure, these tools are installed: dosfstools rsync
#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-no-eeprom.sh
root@beaglebone:/opt/scripts/tools#