Guest User

Untitled

a guest
Feb 21st, 2018
73
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 2.79 KB | None | 0 0
  1. Texas Instruments X-Loader 1.4.4-3 (Oct 28 2011 - 12:51:19)
  2. Reading boot sector
  3. Loading u-boot.bin from mmc
  4.  
  5.  
  6. U-Boot 2010.06-3 (Aug 04 2011 - 14:36:31)
  7.  
  8. OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz
  9. IGEP0030 COM + LPDDR/ONENAND
  10. I2C: ready
  11. DRAM: 512 MiB
  12. Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0x58)
  13. OneNAND version = 0x0031
  14. Chip support all block unlock
  15. Chip has 2 plane
  16. block = 2048, wp status = 0x2
  17. Scanning device for bad blocks
  18. Bad eraseblock 1464 at 0x0b700000
  19. Bad eraseblock 1465 at 0x0b720000
  20. Bad eraseblock 2536 at 0x13d00000
  21. Bad eraseblock 3854 at 0x1e1c0000
  22. Bad eraseblock 3855 at 0x1e1e0000
  23. OneNAND: 512 MiB
  24. OneNAND: Read environment from 0x00200000
  25. In: serial
  26. Out: serial
  27. Err: serial
  28. Die ID #532e00011ff00000015739eb0902f017
  29. Net: smc911x-0
  30. Hit any key to stop autoboot: 0
  31. U-MIS # printenv
  32. baudrate=115200
  33. bootdelay=1
  34. verify=no
  35. ipaddr=10.0.0.125
  36. serverip=10.0.0.12
  37. ethaddr=ac:de:48:00:02:54
  38. biogas=run ubi-args; onenand read 0x81000000 0x280000 0x300000 ; bootm 0x81000000;
  39. mem-args=video=omapfb:vram:2M,vram:4M mem=88M@0x80000000 mem=384M@0x88000000
  40. mmc-boot=mmc init 0; if fatload mmc 0 0x80000000 setup.ini; then source ; fi
  41. dieid#=532e00011ff00000015739eb0902f017
  42. ethact=smc911x-0
  43. bootcmd=run testboot
  44. newmem=mem=430M boot_delay=0 vram=40M omapfb.vram=0:12M,1:16M,2:12M omapfb.mode=tft:au12-16MR@60
  45. 720=mw 0x48004940 0x12d00c
  46. 1000=mw 0x48004940 0x13e80c
  47. 600=mw 0x48004940 0x12580c
  48. testboot=tftp 0x81000000 test-uImage; run ubi-args; bootm 0x81000000;
  49. ubi-args=setenv bootargs omapfb.mode=tft:au12-16MR@60 ubi.mtd=4 rootfstype=ubifs root=ubi0 buddy=mis0010 console=ttyO0,115200n8 video=omapfb:vram:2M,vram:4M mem=88M@0x80000000 mem=384M@0x88000000
  50. 300=mw 0x48004940 0x112c0c
  51. stdin=serial
  52. stdout=serial
  53. stderr=serial
  54.  
  55. Environment size: 929/524284 bytes
  56. U-MIS # run testboot
  57. smc911x: detected LAN9221 controller
  58. smc911x: phy initialized
  59. smc911x: MAC ac:de:48:00:02:54
  60. Using smc911x-0 device
  61. TFTP from server 10.0.0.12; our IP address is 10.0.0.125
  62. Filename 'test-uImage'.
  63. Load address: 0x81000000
  64. Loading: #################################################################
  65. #################################################################
  66. #############################
  67. done
  68. Bytes transferred = 2325788 (237d1c hex)
  69. ## Booting kernel from Legacy Image at 81000000 ...
  70. Image Name: Linux-2.6.37
  71. Image Type: ARM Linux Kernel Image (uncompressed)
  72. Data Size: 2325724 Bytes = 2.2 MiB
  73. Load Address: 80008000
  74. Entry Point: 80008000
  75. Loading Kernel Image ... OK
  76. OK
  77.  
  78. Starting kernel ...
  79.  
  80.  
  81. CTRL-A Z = Hilfe |115200 8N1 | NOR | Minicom 2.4 | VT102 | Offline
Add Comment
Please, Sign In to add comment