API tools faq
paste
sporker

8.3-R verbose boot, warm boot, em as module, msix enabled

sporker
Aug 14th, 2012
47
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.70 KB | None | 0 0
raw download clone embed print report
  1. ???????????????????????????????????????????
  2.  
  3. SMAP type=01 base=0000000000000000 len=0000000000092000
  4. SMAP type=02 base=0000000000092000 len=000000000000e000
  5. SMAP type=02 base=00000000000e6000 len=000000000001a000
  6. SMAP type=01 base=0000000000100000 len=00000000dfd80000
  7. SMAP type=03 base=00000000dfe80000 len=0000000000012000
  8. SMAP type=04 base=00000000dfe92000 len=000000000003e000
  9. SMAP type=02 base=00000000dfed0000 len=0000000000010000
  10. SMAP type=02 base=00000000dfeed000 len=0000000000013000
  11. SMAP type=02 base=00000000dff00000 len=0000000000100000
  12. SMAP type=02 base=00000000e0000000 len=0000000010000000
  13. SMAP type=02 base=00000000ffc00000 len=0000000000400000
  14. SMAP type=01 base=0000000100000000 len=000000071f000000
  15. Table 'FACP' at 0xdfe80290
  16. Table 'APIC' at 0xdfe80390
  17. APIC: Found table at 0xdfe80390
  18. APIC: Using the MADT enumerator.
  19. MADT: Found CPU APIC ID 16 ACPI ID 1: enabled
  20. SMP: Added CPU 16 (AP)
  21. MADT: Found CPU APIC ID 17 ACPI ID 2: enabled
  22. SMP: Added CPU 17 (AP)
  23. MADT: Found CPU APIC ID 18 ACPI ID 3: enabled
  24. SMP: Added CPU 18 (AP)
  25. MADT: Found CPU APIC ID 19 ACPI ID 4: enabled
  26. SMP: Added CPU 19 (AP)
  27. MADT: Found CPU APIC ID 20 ACPI ID 5: enabled
  28. SMP: Added CPU 20 (AP)
  29. MADT: Found CPU APIC ID 21 ACPI ID 6: enabled
  30. SMP: Added CPU 21 (AP)
  31. MADT: Found CPU APIC ID 134 ACPI ID 7: disabled
  32. MADT: Found CPU APIC ID 135 ACPI ID 8: disabled
  33. Copyright (c) 1992-2012 The FreeBSD Project.
  34. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  35. The Regents of the University of California. All rights reserved.
  36. FreeBSD is a registered trademark of The FreeBSD Foundation.
  37. FreeBSD 8.3-RELEASE #0: Tue Aug 14 04:04:08 EDT 2012
  38. [email protected]:/usr/obj/usr/src/sys/GENERIC-NOEM amd64
  39. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8341a000.
  40. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff8341a230.
  41. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff8341a898.
  42. Preloaded elf obj module "/boot/kernel/geom_uzip.ko" at 0xffffffff8341ae88.
  43. Preloaded elf obj module "/boot/kernel/zlib.ko" at 0xffffffff8341b438.
  44. Preloaded elf obj module "/boot/kernel/if_em.ko" at 0xffffffff8341b9a0.
  45. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff8341bf88.
  46. Preloaded elf obj module "/boot/kernel/tmpfs.ko" at 0xffffffff8341bfd8.
  47. Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff8341c5c0.
  48. Timecounter "i8254" frequency 1193182 Hz quality 0
  49. Calibrating TSC clock ... TSC clock: 3100019868 Hz
  50. CPU: AMD Opteron(tm) Processor 4234 (3100.02-MHz K8-class CPU)
  51. Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2
  52. Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  53. Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,AVX>
  54. AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  55. AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
  56. TSC: P-state invariant
  57. L1 2MB data TLB: 32 entries, fully associative
  58. L1 2MB instruction TLB: 24 entries, fully associative
  59. L1 4KB data TLB: 32 entries, fully associative
  60. L1 4KB instruction TLB: 48 entries, fully associative
  61. L1 data cache: 16 kbytes, 64 bytes/line, 1 lines/tag, 4-way associative
  62. L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
  63. L2 2MB data TLB: 1024 entries, 8-way associative
  64. L2 2MB instruction TLB: 0 entries, 8-way associative
  65. L2 4KB data TLB: 1024 entries, 8-way associative
  66. L2 4KB instruction TLB: 1024 entries, 8-way associative
  67. L2 unified cache: 2048 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
  68. real memory = 34359738368 (32768 MB)
  69. Physical memory chunk(s):
  70. 0x0000000000001000 - 0x000000000008dfff, 577536 bytes (141 pages)
  71. 0x0000000003447000 - 0x00000000dfe7ffff, 3701706752 bytes (903737 pages)
  72. 0x0000000100000000 - 0x00000007e1f2ffff, 29560602624 bytes (7216944 pages)
  73. avail memory = 33057955840 (31526 MB)
  74. ACPI APIC Table: <121211 APIC1744>
  75. INTR: Adding local APIC 17 as a target
  76. INTR: Adding local APIC 18 as a target
  77. INTR: Adding local APIC 19 as a target
  78. INTR: Adding local APIC 20 as a target
  79. INTR: Adding local APIC 21 as a target
  80. FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
  81. FreeBSD/SMP: 1 package(s) x 6 core(s)
  82. cpu0 (BSP): APIC ID: 16
  83. cpu1 (AP): APIC ID: 17
  84. cpu2 (AP): APIC ID: 18
  85. cpu3 (AP): APIC ID: 19
  86. cpu4 (AP): APIC ID: 20
  87. cpu5 (AP): APIC ID: 21
  88. APIC: CPU 0 has ACPI ID 1
  89. APIC: CPU 1 has ACPI ID 2
  90. APIC: CPU 2 has ACPI ID 3
  91. APIC: CPU 3 has ACPI ID 4
  92. APIC: CPU 4 has ACPI ID 5
  93. APIC: CPU 5 has ACPI ID 6
  94. x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000
  95. x86bios: SSEG 0x010000-0x01ffff at 0xffffff8000082000
  96. x86bios: EBDA 0x092000-0x09ffff at 0xffffff0000092000
  97. x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000
  98. ULE: setup cpu 0
  99. ULE: setup cpu 1
  100. ULE: setup cpu 2
  101. ULE: setup cpu 3
  102. ULE: setup cpu 4
  103. ULE: setup cpu 5
  104. ACPI: RSDP 0xfb330 00024 (v02 ACPIAM)
  105. ACPI: XSDT 0xdfe80100 00054 (v01 121211 XSDT1744 20111212 MSFT 00000097)
  106. ACPI: FACP 0xdfe80290 000F4 (v03 121211 FACP1744 20111212 MSFT 00000097)
  107. ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655)
  108. ACPI: DSDT 0xdfe80470 0461E (v01 8010_ 8010_001 00000001 INTL 20051117)
  109. ACPI: FACS 0xdfe92000 00040
  110. ACPI: APIC 0xdfe80390 0009E (v01 121211 APIC1744 20111212 MSFT 00000097)
  111. ACPI: MCFG 0xdfe80430 0003C (v01 121211 OEMMCFG 20111212 MSFT 00000097)
  112. ACPI: OEMB 0xdfe92040 000CB (v01 121211 OEMB1744 20111212 MSFT 00000097)
  113. ACPI: HPET 0xdfe8a470 00038 (v01 121211 OEMHPET 20111212 MSFT 00000097)
  114. ACPI: SSDT 0xdfe8a4b0 01158 (v01 A M I POWERNOW 00000001 AMD 00000001)
  115. MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
  116. ioapic0: Routing external 8259A's -> intpin 0
  117. MADT: Found IO APIC ID 1, Interrupt 24 at 0xfec20000
  118. MADT: Interrupt override: source 0, irq 2
  119. ioapic0: Routing IRQ 0 -> intpin 2
  120. MADT: Interrupt override: source 9, irq 9
  121. ioapic0: intpin 9 trigger: level
  122. ioapic0: intpin 9 polarity: low
  123. lapic: Routing NMI -> LINT1
  124. lapic: LINT1 trigger: edge
  125. lapic: LINT1 polarity: high
  126. ioapic0 <Version 2.1> irqs 0-23 on motherboard
  127. ioapic1 <Version 2.1> irqs 24-55 on motherboard
  128. cpu0 BSP:
  129. ID: 0x10000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  130. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  131. timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  132. wlan: <802.11 Link Layer>
  133. nfslock: pseudo-device
  134. kbd: new array size 4
  135. kbd1 at kbdmux0
  136. mem: <memory>
  137. io: <I/O>
  138. null: <null device, zero device>
  139. random: <entropy source, Software, Yarrow>
  140. hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
  141. acpi0: <121211 XSDT1744> on motherboard
  142. PCIe: Memory Mapped configuration base @ 0xe0000000
  143. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
  144. acpi0: [MPSAFE]
  145. acpi0: [ITHREAD]
  146. ACPI: Executed 2 blocks of module-level executable AML code
  147. acpi0: Power Button (fixed)
  148. acpi0: reservation of fec00000, 1000 (3) failed
  149. acpi0: reservation of fee00000, 1000 (3) failed
  150. acpi0: reservation of ffb80000, 80000 (3) failed
  151. acpi0: reservation of fec10000, 20 (3) failed
  152. acpi0: reservation of 0, a0000 (3) failed
  153. acpi0: reservation of 100000, dff00000 (3) failed
  154. ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
  155. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  156. acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
  157. cpu0: <ACPI CPU> on acpi0
  158. cpu1: <ACPI CPU> on acpi0
  159. cpu2: <ACPI CPU> on acpi0
  160. cpu3: <ACPI CPU> on acpi0
  161. cpu4: <ACPI CPU> on acpi0
  162. cpu5: <ACPI CPU> on acpi0
  163. pci_link0: Index IRQ Rtd Ref IRQs
  164. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  165. Validation 0 11 N 0 4 7 10 11 12 14 15
  166. After Disable 0 255 N 0 4 7 10 11 12 14 15
  167. pci_link1: Index IRQ Rtd Ref IRQs
  168. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  169. Validation 0 10 N 0 4 7 10 11 12 14 15
  170. After Disable 0 255 N 0 4 7 10 11 12 14 15
  171. pci_link2: Index IRQ Rtd Ref IRQs
  172. Initial Probe 0 14 N 0 4 7 10 11 12 14 15
  173. Validation 0 14 N 0 4 7 10 11 12 14 15
  174. After Disable 0 255 N 0 4 7 10 11 12 14 15
  175. pci_link3: Index IRQ Rtd Ref IRQs
  176. Initial Probe 0 7 N 0 4 7 10 11 12 14 15
  177. Validation 0 7 N 0 4 7 10 11 12 14 15
  178. After Disable 0 255 N 0 4 7 10 11 12 14 15
  179. pci_link4: Index IRQ Rtd Ref IRQs
  180. Initial Probe 0 255 N 0 4 7 10 11 12 14 15
  181. Validation 0 255 N 0 4 7 10 11 12 14 15
  182. After Disable 0 255 N 0 4 7 10 11 12 14 15
  183. pci_link5: Index IRQ Rtd Ref IRQs
  184. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  185. Validation 0 11 N 0 4 7 10 11 12 14 15
  186. After Disable 0 255 N 0 4 7 10 11 12 14 15
  187. pci_link6: Index IRQ Rtd Ref IRQs
  188. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  189. Validation 0 10 N 0 4 7 10 11 12 14 15
  190. After Disable 0 255 N 0 4 7 10 11 12 14 15
  191. pci_link7: Index IRQ Rtd Ref IRQs
  192. Initial Probe 0 15 N 0 4 7 10 11 12 14 15
  193. Validation 0 15 N 0 4 7 10 11 12 14 15
  194. After Disable 0 255 N 0 4 7 10 11 12 14 15
  195. acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  196. acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
  197. Timecounter "HPET" frequency 14318180 Hz quality 900
  198. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  199. pci0: <ACPI PCI bus> on pcib0
  200. pci0: domain=0, physical bus=0
  201. found-> vendor=0x1002, dev=0x5a12, revid=0x02
  202. domain=0, bus=0, slot=0, func=0
  203. class=06-00-00, hdrtype=0x00, mfdev=1
  204. cmdreg=0x0002, statreg=0x2010, cachelnsz=0 (dwords)
  205. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  206. MSI supports 4 messages
  207. found-> vendor=0x1002, dev=0x5a1c, revid=0x00
  208. domain=0, bus=0, slot=9, func=0
  209. class=06-04-00, hdrtype=0x01, mfdev=0
  210. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  211. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  212. intpin=a, irq=11
  213. powerspec 3 supports D0 D3 current D0
  214. MSI supports 1 message
  215. pcib0: matched entry for 0.9.INTA
  216. pcib0: slot 9 INTA hardwired to IRQ 53
  217. found-> vendor=0x1002, dev=0x5a1d, revid=0x00
  218. domain=0, bus=0, slot=10, func=0
  219. class=06-04-00, hdrtype=0x01, mfdev=0
  220. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  221. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  222. intpin=a, irq=10
  223. powerspec 3 supports D0 D3 current D0
  224. MSI supports 1 message
  225. pcib0: matched entry for 0.10.INTA
  226. pcib0: slot 10 INTA hardwired to IRQ 54
  227. found-> vendor=0x1002, dev=0x4391, revid=0x00
  228. domain=0, bus=0, slot=17, func=0
  229. class=01-06-01, hdrtype=0x00, mfdev=0
  230. cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
  231. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  232. intpin=a, irq=10
  233. powerspec 2 supports D0 D3 current D0
  234. map[10]: type I/O Port, range 32, base 0xb400, size 3, enabled
  235. map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
  236. map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
  237. map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
  238. map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
  239. map[24]: type Memory, range 32, base 0xfe9fa400, size 10, enabled
  240. pcib0: matched entry for 0.17.INTA
  241. pcib0: slot 17 INTA hardwired to IRQ 22
  242. found-> vendor=0x1002, dev=0x4397, revid=0x00
  243. domain=0, bus=0, slot=18, func=0
  244. class=0c-03-10, hdrtype=0x00, mfdev=1
  245. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  246. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  247. intpin=a, irq=11
  248. map[10]: type Memory, range 32, base 0xfe9f6000, size 12, enabled
  249. pcib0: matched entry for 0.18.INTA
  250. pcib0: slot 18 INTA hardwired to IRQ 16
  251. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f6000
  252. ohci early: SMM active, request owner change
  253. found-> vendor=0x1002, dev=0x4398, revid=0x00
  254. domain=0, bus=0, slot=18, func=1
  255. class=0c-03-10, hdrtype=0x00, mfdev=0
  256. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  257. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  258. intpin=a, irq=11
  259. map[10]: type Memory, range 32, base 0xfe9f7000, size 12, enabled
  260. pcib0: matched entry for 0.18.INTA
  261. pcib0: slot 18 INTA hardwired to IRQ 16
  262. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f7000
  263. ohci early: SMM active, request owner change
  264. found-> vendor=0x1002, dev=0x4396, revid=0x00
  265. domain=0, bus=0, slot=18, func=2
  266. class=0c-03-20, hdrtype=0x00, mfdev=0
  267. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  268. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  269. intpin=b, irq=10
  270. powerspec 2 supports D0 D1 D2 D3 current D0
  271. map[10]: type Memory, range 32, base 0xfe9fa800, size 8, enabled
  272. pcib0: matched entry for 0.18.INTB
  273. pcib0: slot 18 INTB hardwired to IRQ 17
  274. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fa800
  275. found-> vendor=0x1002, dev=0x4397, revid=0x00
  276. domain=0, bus=0, slot=19, func=0
  277. class=0c-03-10, hdrtype=0x00, mfdev=1
  278. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  279. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  280. intpin=a, irq=14
  281. map[10]: type Memory, range 32, base 0xfe9f8000, size 12, enabled
  282. pcib0: matched entry for 0.19.INTA
  283. pcib0: slot 19 INTA hardwired to IRQ 18
  284. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f8000
  285. ohci early: SMM active, request owner change
  286. found-> vendor=0x1002, dev=0x4398, revid=0x00
  287. domain=0, bus=0, slot=19, func=1
  288. class=0c-03-10, hdrtype=0x00, mfdev=0
  289. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  290. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  291. intpin=a, irq=14
  292. map[10]: type Memory, range 32, base 0xfe9f9000, size 12, enabled
  293. pcib0: matched entry for 0.19.INTA
  294. pcib0: slot 19 INTA hardwired to IRQ 18
  295. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f9000
  296. ohci early: SMM active, request owner change
  297. found-> vendor=0x1002, dev=0x4396, revid=0x00
  298. domain=0, bus=0, slot=19, func=2
  299. class=0c-03-20, hdrtype=0x00, mfdev=0
  300. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  301. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  302. intpin=b, irq=7
  303. powerspec 2 supports D0 D1 D2 D3 current D0
  304. map[10]: type Memory, range 32, base 0xfe9fac00, size 8, enabled
  305. pcib0: matched entry for 0.19.INTB
  306. pcib0: slot 19 INTB hardwired to IRQ 19
  307. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fac00
  308. found-> vendor=0x1002, dev=0x4385, revid=0x3d
  309. domain=0, bus=0, slot=20, func=0
  310. class=0c-05-00, hdrtype=0x00, mfdev=1
  311. cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
  312. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  313. found-> vendor=0x1002, dev=0x439d, revid=0x00
  314. domain=0, bus=0, slot=20, func=3
  315. class=06-01-00, hdrtype=0x00, mfdev=1
  316. cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
  317. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  318. found-> vendor=0x1002, dev=0x4384, revid=0x00
  319. domain=0, bus=0, slot=20, func=4
  320. class=06-04-01, hdrtype=0x01, mfdev=1
  321. cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
  322. lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
  323. found-> vendor=0x1002, dev=0x4399, revid=0x00
  324. domain=0, bus=0, slot=20, func=5
  325. class=0c-03-10, hdrtype=0x00, mfdev=0
  326. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  327. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  328. intpin=c, irq=14
  329. map[10]: type Memory, range 32, base 0xfe9fb000, size 12, enabled
  330. pcib0: matched entry for 0.20.INTC
  331. pcib0: slot 20 INTC hardwired to IRQ 18
  332. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fb000
  333. ohci early: SMM active, request owner change
  334. found-> vendor=0x1022, dev=0x1600, revid=0x00
  335. domain=0, bus=0, slot=24, func=0
  336. class=06-00-00, hdrtype=0x00, mfdev=1
  337. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  338. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  339. found-> vendor=0x1022, dev=0x1601, revid=0x00
  340. domain=0, bus=0, slot=24, func=1
  341. class=06-00-00, hdrtype=0x00, mfdev=1
  342. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  343. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  344. found-> vendor=0x1022, dev=0x1602, revid=0x00
  345. domain=0, bus=0, slot=24, func=2
  346. class=06-00-00, hdrtype=0x00, mfdev=1
  347. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  348. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  349. found-> vendor=0x1022, dev=0x1603, revid=0x00
  350. domain=0, bus=0, slot=24, func=3
  351. class=06-00-00, hdrtype=0x00, mfdev=1
  352. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  353. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  354. found-> vendor=0x1022, dev=0x1604, revid=0x00
  355. domain=0, bus=0, slot=24, func=4
  356. class=06-00-00, hdrtype=0x00, mfdev=1
  357. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  358. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  359. found-> vendor=0x1022, dev=0x1605, revid=0x00
  360. domain=0, bus=0, slot=24, func=5
  361. class=06-00-00, hdrtype=0x00, mfdev=1
  362. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  363. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  364. pcib1: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
  365. pcib1: domain 0
  366. pcib1: secondary bus 3
  367. pcib1: subordinate bus 3
  368. pcib1: I/O decode 0xe000-0xefff
  369. pcib1: memory decode 0xfeb00000-0xfebfffff
  370. pcib1: no prefetched decode
  371. pci3: <ACPI PCI bus> on pcib1
  372. pci3: domain=0, physical bus=3
  373. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  374. domain=0, bus=3, slot=0, func=0
  375. class=02-00-00, hdrtype=0x00, mfdev=0
  376. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  377. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  378. intpin=a, irq=11
  379. powerspec 2 supports D0 D3 current D0
  380. MSI supports 1 message, 64 bit
  381. MSI-X supports 5 messages in map 0x1c
  382. map[10]: type Memory, range 32, base 0xfebe0000, size 17, enabled
  383. pcib1: requested memory range 0xfebe0000-0xfebfffff: good
  384. map[18]: type I/O Port, range 32, base 0xe800, size 5, enabled
  385. pcib1: requested I/O range 0xe800-0xe81f: in range
  386. map[1c]: type Memory, range 32, base 0xfebdc000, size 14, enabled
  387. pcib1: requested memory range 0xfebdc000-0xfebdffff: good
  388. pcib1: matched entry for 3.0.INTA
  389. pcib1: slot 0 INTA hardwired to IRQ 48
  390. em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xe800-0xe81f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 48 at device 0.0 on pci3
  391. em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
  392. em0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfebdc000
  393. em0: attempting to allocate 3 MSI-X vectors (5 supported)
  394. msi: routing MSI-X IRQ 256 to local APIC 16 vector 49
  395. msi: routing MSI-X IRQ 257 to local APIC 16 vector 50
  396. msi: routing MSI-X IRQ 258 to local APIC 16 vector 51
  397. em0: using IRQs 256-258 for MSI-X
  398. em0: Using MSIX interrupts with 3 vectors
  399. em0: [MPSAFE]
  400. em0: [ITHREAD]
  401. em0: [MPSAFE]
  402. em0: [ITHREAD]
  403. em0: [MPSAFE]
  404. em0: [ITHREAD]
  405. em0: bpf attached
  406. em0: Ethernet address: 00:e0:81:cd:92:cd
  407. pcib2: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
  408. pcib2: domain 0
  409. pcib2: secondary bus 2
  410. pcib2: subordinate bus 2
  411. pcib2: I/O decode 0xd000-0xdfff
  412. pcib2: memory decode 0xfea00000-0xfeafffff
  413. pcib2: no prefetched decode
  414. pci2: <ACPI PCI bus> on pcib2
  415. pci2: domain=0, physical bus=2
  416. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  417. domain=0, bus=2, slot=0, func=0
  418. class=02-00-00, hdrtype=0x00, mfdev=0
  419. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  420. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  421. intpin=a, irq=15
  422. powerspec 2 supports D0 D3 current D0
  423. MSI supports 1 message, 64 bit
  424. MSI-X supports 5 messages in map 0x1c
  425. map[10]: type Memory, range 32, base 0xfeae0000, size 17, enabled
  426. pcib2: requested memory range 0xfeae0000-0xfeafffff: good
  427. map[18]: type I/O Port, range 32, base 0xd800, size 5, enabled
  428. pcib2: requested I/O range 0xd800-0xd81f: in range
  429. map[1c]: type Memory, range 32, base 0xfeadc000, size 14, enabled
  430. pcib2: requested memory range 0xfeadc000-0xfeadffff: good
  431. pcib2: matched entry for 2.0.INTA
  432. pcib2: slot 0 INTA hardwired to IRQ 47
  433. em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd800-0xd81f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 47 at device 0.0 on pci2
  434. em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeae0000
  435. em1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfeadc000
  436. em1: attempting to allocate 3 MSI-X vectors (5 supported)
  437. msi: routing MSI-X IRQ 259 to local APIC 16 vector 52
  438. msi: routing MSI-X IRQ 260 to local APIC 16 vector 53
  439. msi: routing MSI-X IRQ 261 to local APIC 16 vector 54
  440. em1: using IRQs 259-261 for MSI-X
  441. em1: Using MSIX interrupts with 3 vectors
  442. em1: [MPSAFE]
  443. em1: [ITHREAD]
  444. em1: [MPSAFE]
  445. em1: [ITHREAD]
  446. em1: [MPSAFE]
  447. em1: [ITHREAD]
  448. em1: bpf attached
  449. em1: Ethernet address: 00:e0:81:cd:92:cc
  450. ahci0: <ATI IXP700 AHCI SATA controller> port 0xb400-0xb407,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f mem 0xfe9fa400-0xfe9fa7ff irq 22 at device 17.0 on pci0
  451. ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe9fa400
  452. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 16 vector 55
  453. ahci0: [MPSAFE]
  454. ahci0: [ITHREAD]
  455. ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
  456. ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 6ports
  457. ahci0: Caps2:
  458. ahcich0: <AHCI channel> at channel 0 on ahci0
  459. ahcich0: [MPSAFE]
  460. ahcich0: [ITHREAD]
  461. ahcich0: Caps:
  462. ahcich1: <AHCI channel> at channel 1 on ahci0
  463. ahcich1: [MPSAFE]
  464. ahcich1: [ITHREAD]
  465. ahcich1: Caps:
  466. ahcich2: <AHCI channel> at channel 2 on ahci0
  467. ahcich2: [MPSAFE]
  468. ahcich2: [ITHREAD]
  469. ahcich2: Caps:
  470. ahcich3: <AHCI channel> at channel 3 on ahci0
  471. ahcich3: [MPSAFE]
  472. ahcich3: [ITHREAD]
  473. ahcich3: Caps:
  474. ahcich4: <AHCI channel> at channel 4 on ahci0
  475. ahcich4: [MPSAFE]
  476. ahcich4: [ITHREAD]
  477. ahcich4: Caps:
  478. ahcich5: <AHCI channel> at channel 5 on ahci0
  479. ahcich5: [MPSAFE]
  480. ahcich5: [ITHREAD]
  481. ahcich5: Caps:
  482. ohci0: <OHCI (generic) USB controller> mem 0xfe9f6000-0xfe9f6fff irq 16 at device 18.0 on pci0
  483. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 56
  484. ohci0: [MPSAFE]
  485. ohci0: [ITHREAD]
  486. usbus0: <OHCI (generic) USB controller> on ohci0
  487. usbus0: bpf attached
  488. ohci0: usbpf: Attached
  489. ohci1: <OHCI (generic) USB controller> mem 0xfe9f7000-0xfe9f7fff irq 16 at device 18.1 on pci0
  490. ohci1: [MPSAFE]
  491. ohci1: [ITHREAD]
  492. usbus1: <OHCI (generic) USB controller> on ohci1
  493. usbus1: bpf attached
  494. ohci1: usbpf: Attached
  495. ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe9fa800-0xfe9fa8ff irq 17 at device 18.2 on pci0
  496. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 16 vector 57
  497. ehci0: [MPSAFE]
  498. ehci0: [ITHREAD]
  499. ehci0: Dropped interrupts workaround enabled
  500. usbus2: EHCI version 1.0
  501. usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
  502. usbus2: bpf attached
  503. ehci0: usbpf: Attached
  504. ohci2: <OHCI (generic) USB controller> mem 0xfe9f8000-0xfe9f8fff irq 18 at device 19.0 on pci0
  505. ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 58
  506. ohci2: [MPSAFE]
  507. ohci2: [ITHREAD]
  508. usbus3: <OHCI (generic) USB controller> on ohci2
  509. usbus3: bpf attached
  510. ohci2: usbpf: Attached
  511. ohci3: <OHCI (generic) USB controller> mem 0xfe9f9000-0xfe9f9fff irq 18 at device 19.1 on pci0
  512. ohci3: [MPSAFE]
  513. ohci3: [ITHREAD]
  514. usbus4: <OHCI (generic) USB controller> on ohci3
  515. usbus4: bpf attached
  516. ohci3: usbpf: Attached
  517. ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe9fac00-0xfe9facff irq 19 at device 19.2 on pci0
  518. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 59
  519. ehci1: [MPSAFE]
  520. ehci1: [ITHREAD]
  521. ehci1: Dropped interrupts workaround enabled
  522. usbus5: EHCI version 1.0
  523. usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
  524. usbus5: bpf attached
  525. ehci1: usbpf: Attached
  526. pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
  527. isab0: <PCI-ISA bridge> at device 20.3 on pci0
  528. isa0: <ISA bus> on isab0
  529. pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
  530. pcib3: domain 0
  531. pcib3: secondary bus 1
  532. pcib3: subordinate bus 1
  533. pcib3: I/O decode 0xc000-0xcfff
  534. pcib3: memory decode 0xfdf00000-0xfe7fffff
  535. pcib3: no prefetched decode
  536. pcib3: Subtractively decoded bridge.
  537. pci1: <ACPI PCI bus> on pcib3
  538. pci1: domain=0, physical bus=1
  539. found-> vendor=0x1a03, dev=0x2000, revid=0x10
  540. domain=0, bus=1, slot=9, func=0
  541. class=03-00-00, hdrtype=0x00, mfdev=0
  542. cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
  543. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  544. intpin=a, irq=15
  545. powerspec 3 supports D0 D1 D2 D3 current D0
  546. map[10]: type Memory, range 32, base 0xfe000000, size 23, enabled
  547. pcib3: requested memory range 0xfe000000-0xfe7fffff: good
  548. map[14]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
  549. pcib3: requested memory range 0xfdfe0000-0xfdffffff: good
  550. map[18]: type I/O Port, range 32, base 0xc800, size 7, enabled
  551. pcib3: requested I/O range 0xc800-0xc87f: in range
  552. pcib3: matched entry for 1.9.INTA
  553. pcib3: slot 9 INTA hardwired to IRQ 23
  554. vgapci0: <VGA-compatible display> port 0xc800-0xc87f mem 0xfe000000-0xfe7fffff,0xfdfe0000-0xfdffffff irq 23 at device 9.0 on pci1
  555. ohci4: <OHCI (generic) USB controller> mem 0xfe9fb000-0xfe9fbfff irq 18 at device 20.5 on pci0
  556. ohci4: [MPSAFE]
  557. ohci4: [ITHREAD]
  558. usbus6: <OHCI (generic) USB controller> on ohci4
  559. usbus6: bpf attached
  560. ohci4: usbpf: Attached
  561. acpi_button0: <Power Button> on acpi0
  562. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
  563. atrtc0: registered as a time-of-day clock (resolution 1000000us)
  564. acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  565. device_attach: acpi_hpet1 attach returned 12
  566. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  567. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 60
  568. uart0: [FILTER]
  569. uart0: fast interrupt
  570. uart0: console (9600,n,8,1)
  571. uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
  572. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 61
  573. uart1: [FILTER]
  574. uart1: fast interrupt
  575. acpi0: wakeup code va 0xffffff890343c000 pa 0x4000
  576. ex_isa_identify()
  577. ahc_isa_probe 0: ioport 0xc00 alloc failed
  578. ahc_isa_probe 11: ioport 0xbc00 alloc failed
  579. isa_probe_children: disabling PnP devices
  580. atrtc: atrtc0 already exists; skipping it
  581. sc: sc0 already exists; skipping it
  582. uart: uart0 already exists; skipping it
  583. uart: uart1 already exists; skipping it
  584. isa_probe_children: probing non-PnP devices
  585. orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc800-0xcd7ff on isa0
  586. atkbd: the current kbd controller command byte 0067
  587. atkbd: unable to set the command byte.
  588. sc0: <System console> at flags 0x100 on isa0
  589. sc0: CGA <16 virtual consoles, flags=0x300>
  590. sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
  591. vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
  592. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
  593. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  594. kbd0 at atkbd0
  595. kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
  596. ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 62
  597. atkbd0: [GIANT-LOCKED]
  598. atkbd0: [ITHREAD]
  599. psm0: current command byte:0067
  600. psm: failed to restore the keyboard controller command byte.
  601. psm0: unable to set the command byte.
  602. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
  603. ppc0: cannot reserve I/O port range
  604. ppc0: <Parallel port> failed to probe at irq 7 on isa0
  605. isa_probe_children: probing PnP devices
  606. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  607. acpi_throttle0: P_CNT from P_BLK 0x810
  608. hwpstate0: <Cool`n'Quiet 2.0> on cpu0
  609. Device configuration finished.
  610. procfs registered
  611. ZFS filesystem version 5
  612. ZFS storage pool version 28
  613. lapic: Divisor 2, Frequency 100000642 Hz
  614. Timecounter "TSC" frequency 3100019868 Hz quality -100
  615. Timecounters tick every 1.000 msec
  616. vlan: initialized, using hash tables with chaining
  617. lo0: bpf attached
  618. hptrr: no controller detected.
  619. md0: Preloaded image </boot/mfsroot> 35856384 bytes at 0xffffffff811c8eb0
  620. usbus0: 12Mbps Full Speed USB v1.0
  621. usbus1: 12Mbps Full Speed USB v1.0
  622. usbus2: 480Mbps High Speed USB v2.0
  623. usbus3: 12Mbps Full Speed USB v1.0
  624. usbus4: 12Mbps Full Speed USB v1.0
  625. usbus5: 480Mbps High Speed USB v2.0
  626. usbus6: 12Mbps Full Speed USB v1.0
  627. ahcich0: AHCI reset...
  628. ahcich0: SATA connect time=100us status=00000123
  629. ahcich0: AHCI reset: device found
  630. ahcich0: AHCI reset: device ready after 0ms
  631. ugen0.1: <ATI> at usbus0
  632. uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  633. ugen1.1: <ATI> at usbus1
  634. uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  635. ugen2.1: <ATI> at usbus2
  636. uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
  637. ugen3.1: <ATI> at usbus3
  638. uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  639. ugen4.1: <ATI> at usbus4
  640. uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
  641. ugen5.1: <ATI> at usbus5
  642. uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
  643. ugen6.1: <ATI> at usbus6
  644. uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
  645. (aprobe0:ahcich0:0:15:0): SIGNATURE: 0000
  646. (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
  647. ahcich1: AHCI reset...
  648. ahcich1: SATA connect time=100us status=00000123
  649. ahcich1: AHCI reset: device found
  650. ahcich1: AHCI reset: device ready after 0ms
  651. (aprobe0:ahcich1:0:15:0): SIGNATURE: 0000
  652. (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
  653. ahcich2: AHCI reset...
  654. ahcich2: SATA connect timeout time=10000us status=00000000
  655. ahcich2: AHCI reset: device not found
  656. ahcich3: AHCI reset...
  657. ahcich3: SATA connect timeout time=10000us status=00000000
  658. ahcich3: AHCI reset: device not found
  659. ahcich4: AHCI reset...
  660. ahcich4: SATA connect time=100us status=00000123
  661. ahcich4: AHCI reset: device found
  662. ahcich4: AHCI reset: device ready after 0ms
  663. (aprobe0:ahcich4:0:15:0): SIGNATURE: 0000
  664. (aprobe0:ahcich4:0:0:0): SIGNATURE: 0000
  665. ahcich5: AHCI reset...
  666. ahcich5: SATA connect time=100us status=00000123
  667. ahcich5: AHCI reset: device found
  668. ahcich5: AHCI reset: device ready after 0ms
  669. (aprobe0:ahcich5:0:15:0): SIGNATURE: 0000
  670. (aprobe0:ahcich5:0:0:0): SIGNATURE: 0000
  671. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
  672. ada0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  673. ada0: Serial Number WD-WXD1E71KUUR2
  674. ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, GEOM: new disk ada0
  675. PIO 8192bytes)
  676. ada0: Command Queueing enabled
  677. ada0: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  678. ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
  679. ada1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  680. ada1: Serial Number WD-WX81E81AKUK3
  681. ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  682. ada1: Command Queueing enabled
  683. ada1: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  684. ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
  685. ada2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  686. ada2: Serial Number WD-WX71E71MSF58
  687. ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  688. GEOM: new disk ada1
  689. GEOM: new disk ada2
  690. ada2: Command Queueing enabled
  691. ada2: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  692. ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
  693. ada3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  694. ada3: Serial Number WD-WXD1E71LVFE8
  695. ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  696. ada3: Command Queueing enabled
  697. ada3: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  698. pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
  699. pass0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  700. pass0: Serial Number WD-WXD1E71KUUR2
  701. pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  702. pass0: Command Queueing enabled
  703. pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
  704. pass1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  705. pass1: Serial Number WD-WX81E81AKUK3
  706. pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  707. pass1: Command Queueing enabled
  708. pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
  709. pass2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  710. pass2: Serial Number WD-WX71E71MSF58
  711. pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  712. pass2: Command Queueing enabled
  713. pass3 at ahcich5 bus 0 scbus5 target 0 lun 0
  714. pass3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  715. pass3: Serial Number WD-WXD1E71LVFE8
  716. pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  717. pass3: Command Queueing enabled
  718. ATA PseudoRAID loaded
  719. SMP: AP CPU #1 Launched!
  720. cpu1 AP:
  721. ID: 0x11000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  722. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  723. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  724. SMP: AP CPU #5 Launched!
  725. cpu5 AP:
  726. ID: 0x15000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  727. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  728. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  729. SMP: AP CPU #4 Launched!
  730. cpu4 AP:
  731. ID: 0x14000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  732. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  733. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  734. SMP: AP CPU #2 Launched!
  735. cpu2 AP:
  736. ID: 0x12000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  737. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  738. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  739. SMP: AP CPU #3 Launched!
  740. cpu3 AP:
  741. ID: 0x13000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  742. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  743. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  744. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 17 vector 48
  745. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 18 vector 48
  746. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 19 vector 48
  747. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 20 vector 48
  748. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 21 vector 48
  749. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 17 vector 49
  750.  
  751.  
  752.  
  753. msi: Assigning MSI-X IRQ 257 to local APIC 20 vector 49
  754. cpuid = 1
  755. msi: Assigning MSI-X IRQ 258 to local APIC 21 vector 49
  756. KDB: stack backtrace:
  757. msi: Assigning MSI-X IRQ 260 to local APIC 17 vector 50
  758. #0 0xffffffff806263de at kdb_backtrace+0x5e
  759. msi: Assigning MSI-X IRQ 261 to local APIC 18 vector 50
  760. #1 0xffffffff805f35f7 at panic+0x187
  761. #2 0xffffffff8115e91a at em_refresh_mbufs+0x20a
  762. uhub6: #3 0xffffffff8115f5e5 at em_rxeof+0x405
  763. 2 ports with 2 removable, self powered
  764. #4 0xffffffff8115f6d4 at em_msix_rx+0x24
  765. uhub1: #5 0xffffffff805cb034 at intr_event_execute_handlers+0x104
  766. 3 ports with 3 removable, self powered
  767. #6 0xffffffff805cc6c5 at ithread_loop+0x95
  768. #7 0xffffffff805c824f at fork_exit+0x11f
  769. #8 0xffffffff808d13de at fork_trampoline+0xe
  770. uhub4: Uptime: 3 ports with 3 removable, self powered
  771. 9s
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!