Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Sj:▒70▒MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
- Loading Environment from FAT... Unable to use mmc 1:1... In: serial@5000000
- Out: serial@5000000
- Err: serial@5000000
- Net: No ethernet found.
- starting USB...
- No controllers found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 160 bytes read in 3 ms (51.8 KiB/s)
- 1: LibreELEC
- Retrieving file: /KERNEL
- 16626176 bytes read in 1665 ms (9.5 MiB/s)
- append: boot=UUID=1206-0000 disk=UUID=52d85c1f-cdb2-41f5-b0ff-e4ccfc776d39 console=ttyS0,115200
- Retrieving file: /sun50i-h6-tanix-tx6.dtb
- 14963 bytes read in 4 ms (3.6 MiB/s)
- ## Flattened Device Tree blob at 4fa00000
- Booting using the fdt blob at 0x4fa00000
- Loading Device Tree to 0000000049ff9000, end 0000000049fffa72 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.1.5 (jenkins@prometheus) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Wed Jun 12 06:13:16 EDT 2019
- [ 0.000000] Machine model: Tanix TX6
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 384 MiB at 0x00000000e8000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000ffffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xe79e4840-0xe79e5fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x44c with crng_init=0
- [ 0.000000] percpu: Embedded 23 pages/cpu s53464 r8192 d32552 u94208
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: boot=UUID=1206-0000 disk=UUID=52d85c1f-cdb2-41f5-b0ff-e4ccfc776d39 console=ttyS0,115200
- [ 0.000000] Memory: 2679984K/3145728K available (9020K kernel code, 748K rwdata, 3408K rodata, 3008K init, 349K bss, 72528K reserved, 393216K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000252] Console: colour dummy device 80x25
- [ 0.000318] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.000330] pid_max: default: 32768 minimum: 301
- [ 0.000411] LSM: Security Framework initializing
- [ 0.002075] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.002916] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.002967] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.003000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.003473] *** VALIDATE proc ***
- [ 0.003710] *** VALIDATE cgroup1 ***
- [ 0.003719] *** VALIDATE cgroup2 ***
- [ 0.028047] ASID allocator initialised with 32768 entries
- [ 0.036045] rcu: Hierarchical SRCU implementation.
- [ 0.044560] EFI services will not be available.
- [ 0.052079] smp: Bringing up secondary CPUs ...
- [ 0.084523] Detected VIPT I-cache on CPU1
- [ 0.084571] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.116464] Detected VIPT I-cache on CPU2
- [ 0.116494] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.148519] Detected VIPT I-cache on CPU3
- [ 0.148547] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.148616] smp: Brought up 1 node, 4 CPUs
- [ 0.148636] SMP: Total of 4 processors activated.
- [ 0.148643] CPU features: detected: 32-bit EL0 Support
- [ 0.148650] CPU features: detected: CRC32 instructions
- [ 0.148919] CPU: All CPU(s) started at EL2
- [ 0.148938] alternatives: patching kernel code
- [ 0.150639] devtmpfs: initialized
- [ 0.153951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.154002] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.165985] pinctrl core: initialized pinctrl subsystem
- [ 0.166735] DMI not present or invalid.
- [ 0.167064] NET: Registered protocol family 16
- [ 0.167382] audit: initializing netlink subsys (disabled)
- [ 0.167497] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1
- [ 0.168216] cpuidle: using governor menu
- [ 0.168465] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
- [ 0.168475] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.169667] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.170150] Serial: AMBA PL011 UART driver
- [ 0.185763] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.185776] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.185783] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.185790] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.186255] cryptd: max_cpu_qlen set to 1000
- [ 0.187671] SCSI subsystem initialized
- [ 0.188129] usbcore: registered new interface driver usbfs
- [ 0.188178] usbcore: registered new interface driver hub
- [ 0.188247] usbcore: registered new device driver usb
- [ 0.188568] media: Linux media interface: v0.10
- [ 0.188611] videodev: Linux video capture interface: v2.00
- [ 0.188790] pps_core: LinuxPPS API ver. 1 registered
- [ 0.188797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.188818] PTP clock support registered
- [ 0.192983] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.193735] clocksource: Switched to clocksource arch_sys_counter
- [ 0.193959] VFS: Disk quotas dquot_6.6.0
- [ 0.194018] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.194064] *** VALIDATE hugetlbfs ***
- [ 0.201168] NET: Registered protocol family 2
- [ 0.201691] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
- [ 0.201908] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.202269] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.202777] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.202928] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.203036] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.203263] NET: Registered protocol family 1
- [ 0.203736] RPC: Registered named UNIX socket transport module.
- [ 0.203743] RPC: Registered udp transport module.
- [ 0.203748] RPC: Registered tcp transport module.
- [ 0.203754] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.240780] Initialise system trusted keyrings
- [ 0.240907] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 0.248633] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.249373] NFS: Registering the id_resolver key type
- [ 0.249398] Key type id_resolver registered
- [ 0.249403] Key type id_legacy registered
- [ 0.249416] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.249585] 9p: Installing v9fs 9p2000 file system support
- [ 0.255548] Key type asymmetric registered
- [ 0.255561] Asymmetric key parser 'x509' registered
- [ 0.255623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
- [ 0.255761] io scheduler mq-deadline registered
- [ 0.255768] io scheduler kyber registered
- [ 0.256198] sun50i-de2-bus 1000000.display-engine: Error couldn't map SRAM to device
- [ 0.256931] sun4i-usb-phy 5100400.phy: failed to get clock usb0_phy
- [ 0.261106] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
- [ 0.274579] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.277829] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.285157] loop: module loaded
- [ 0.287088] libphy: Fixed MDIO Bus: probed
- [ 0.287982] tun: Universal TUN/TAP device driver, 1.6
- [ 0.291114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.291127] ehci-platform: EHCI generic platform driver
- [ 0.291332] ehci-platform 5101000.usb: EHCI Host Controller
- [ 0.291356] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
- [ 0.292052] ehci-platform 5101000.usb: irq 21, io mem 0x05101000
- [ 0.305741] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
- [ 0.306378] hub 1-0:1.0: USB hub found
- [ 0.306411] hub 1-0:1.0: 1 port detected
- [ 0.306984] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.307008] ohci-platform: OHCI generic platform driver
- [ 0.307185] ohci-platform 5101400.usb: Generic Platform OHCI controller
- [ 0.307206] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
- [ 0.307474] ohci-platform 5101400.usb: irq 22, io mem 0x05101400
- [ 0.370350] hub 2-0:1.0: USB hub found
- [ 0.370387] hub 2-0:1.0: 1 port detected
- [ 0.371258] usbcore: registered new interface driver uas
- [ 0.371341] usbcore: registered new interface driver usb-storage
- [ 0.373422] sun6i-rtc 7000000.rtc: registered as rtc0
- [ 0.373435] sun6i-rtc 7000000.rtc: RTC enabled
- [ 0.373520] i2c /dev entries driver
- [ 0.373941] IR NEC protocol handler initialized
- [ 0.373948] IR RC5(x/sz) protocol handler initialized
- [ 0.373953] IR RC6 protocol handler initialized
- [ 0.373958] IR JVC protocol handler initialized
- [ 0.373963] IR Sony protocol handler initialized
- [ 0.373968] IR SANYO protocol handler initialized
- [ 0.373972] IR Sharp protocol handler initialized
- [ 0.373977] IR MCE Keyboard/mouse protocol handler initialized
- [ 0.373982] IR XMP protocol handler initialized
- [ 0.373987] ir_imon_decoder: IR iMON protocol handler initialized
- [ 0.373992] IR RCMM protocol handler initialized
- [ 0.374149] usbcore: registered new interface driver xbox_remote
- [ 0.375026] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 0.375510] sdhci: Secure Digital Host Controller Interface driver
- [ 0.375517] sdhci: Copyright(c) Pierre Ossman
- [ 0.375615] Synopsys Designware Multimedia Card Interface Driver
- [ 0.376184] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.376771] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.377644] usbcore: registered new interface driver usbhid
- [ 0.377654] usbhid: USB HID core driver
- [ 0.378649] cedrus 1c0e000.video-codec: Device registered as /dev/video0
- [ 0.380500] sun4i-i2s 5091000.i2s: Max playback channels changed from 2 to 8
- [ 0.381227] Initializing XFRM netlink socket
- [ 0.381249] NET: Registered protocol family 17
- [ 0.381431] 9pnet: Installing 9P2000 support
- [ 0.381456] Key type dns_resolver registered
- [ 0.382082] registered taskstats version 1
- [ 0.382090] Loading compiled-in X.509 certificates
- [ 0.396517] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
- [ 0.396810] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator
- [ 0.397221] printk: console [ttyS0] disabled
- [ 0.418207] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 18, base_baud = 1500000) is a 16550A
- [ 1.455062] printk: console [ttyS0] enabled
- [ 1.479197] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops)
- [ 1.486665] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops)
- [ 1.494741] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops)
- [ 1.502798] sun8i-dw-hdmi 6000000.hdmi: 6000000.hdmi supply hvcc not found, using dummy regulator
- [ 1.511747] platform connector: connector supply ddc not found, using dummy regulator
- [ 1.519915] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
- [ 1.530045] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 1.538448] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops)
- [ 1.545860] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.552473] [drm] No driver support for vblank timestamp query.
- [ 1.558703] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
- [ 1.566492] [drm] Cannot find any crtc or sizes
- [ 1.571608] ehci-platform 5311000.usb: EHCI Host Controller
- [ 1.577204] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3
- [ 1.585060] [drm] Cannot find any crtc or sizes
- [ 1.589928] ehci-platform 5311000.usb: irq 23, io mem 0x05311000
- [ 1.609753] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
- [ 1.616427] hub 3-0:1.0: USB hub found
- [ 1.620213] hub 3-0:1.0: 1 port detected
- [ 1.624922] ohci-platform 5311400.usb: Generic Platform OHCI controller
- [ 1.631558] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 4
- [ 1.639578] ohci-platform 5311400.usb: irq 24, io mem 0x05311400
- [ 1.706449] hub 4-0:1.0: USB hub found
- [ 1.710240] hub 4-0:1.0: 1 port detected
- [ 1.715006] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
- [ 1.726122] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
- [ 1.731884] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 5
- [ 1.740273] hub 5-0:1.0: USB hub found
- [ 1.744064] hub 5-0:1.0: 1 port detected
- [ 1.749069] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
- [ 1.759696] sunxi-mmc 4020000.mmc: Got CD GPIO
- [ 1.789521] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
- [ 1.799192] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator
- [ 1.833366] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
- [ 1.844329] asoc-simple-card sound: i2s-hifi <-> 5091000.i2s mapping ok
- [ 1.851020] asoc-simple-card sound: ASoC: no DMI vendor name!
- [ 1.857604] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
- [ 1.865820] ALSA device list:
- [ 1.868821] #0: allwinner-hdmi
- [ 1.873850] Freeing unused kernel memory: 3008K
- [ 1.878407] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.888582] mmc0: new high speed SDHC card at address 59b4
- [ 1.895218] mmcblk0: mmc0:59b4 EB1QL 29.8 GiB
- [ 1.900950] mmcblk0: p1 p2
- [ 1.909779] Run /init as init process
- [ 1.937791] mmc1: new DDR MMC card at address 0001
- [ 1.943916] mmcblk1: mmc1:0001 S0J38Y 58.2 GiB
- [ 1.949406] mmcblk1boot0: mmc1:0001 S0J38Y partition 1 4.00 MiB
- [ 1.956164] mmcblk1boot1: mmc1:0001 S0J38Y partition 2 4.00 MiB
- Welcome to LibreELEC (community): nightly-20190612-84baa30!
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Listening on Journal Audit Socket.
- [ OK OK ] Reached target Slices.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ OK ] Reached target Paths.
- Mounting Kernel Debug File System...
- [ OK ] Listening on udev Control Socket.
- Mounting POSIX Message Queue File System...
- Mounting Variable Directory...
- Mounting Huge Pages File System...
- Starting Show Version...
- [ OK ] Listening on RPCbind Server Activation Socket.
- [ OK ] Reached target RPC Port Mapper.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- LibreELEC (community): nightly-20190612-84baa30
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Variable Directory.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Show Version.
- Starting Create kernel modules tree from overlays...
- / # [ OK ] Started Create kernel modules tree from overlays.
- Starting Load Kernel Modules...
- Starting Create list of re…odes for the current kernel...
- Starting udev Coldplug all Devices...
- Starting Mounting swapfile...
- Starting Setup machine-id...
- [ OK ] Started Create list of req… nodes for the current kernel.
- [ OK ] Started Load Kernel Modules.
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- [ OK ] Started Setup machine-id.
- Starting Journal Service...
- Starting Create Static Device Nodes in /dev...
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Mounting swapfile.
- [ OK ] Reached target Swap.
- Mounting Temporary Directory (/tmp)...
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Mounted Temporary Directory (/tmp).
- [ OK ] Reached target Local File Systems.
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Setup User config dir...
- Starting Setup Timezone data...
- Starting Setup User cache dir...
- Starting Add random entropy from file...
- Starting OpenSSL configuration service...
- Starting RPC Bind...
- Starting Update hwdb.bin...
- Starting Rebuild Journal Catalog...
- [ OK ] Started Setup Timezone data.
- [ OK ] Started Rebuild Journal Catalog.
- [ OK ] Started OpenSSL configuration service.
- [ OK ] Started Setup User cache dir.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Setup User config dir.
- [ OK ] Started RPC Bind.
- [ OK ] Started Add random entropy from file.
- [ OK ] Started Update hwdb.bin.
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- [ OK ] Listening on lircd.socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting Cron daemon...
- Starting Broadcom SDIO Firmware Symlink Service...
- Starting D-Bus System Message Bus...
- Starting Samba Configuration...
- Starting PulseAudio Sound Service...
- Starting Login Service...
- [ OK ] Started Eventlirc server daemon.
- Starting Kodi clean debug logs...
- [ OK ] Started Cron daemon.
- [ OK ] Started Kodi clean debug logs.
- [ OK ] Started Broadcom SDIO Firmware Symlink Service.
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started Samba Configuration.
- Starting Connection service...
- [ OK ] Started Login Service.
- [ OK ] Started Connection service.
- [ OK ] Reached target Network.
- [ OK ] Started Avahi Daemon.
- [ OK ] Reached target Network is Online.
- Starting Samba NMB Daemon...
- [ OK ] Started PulseAudio Sound Service.
- Starting WPA supplicant...
- Starting Hostname Service...
- [ OK ] Started WPA supplicant.
- [ OK ] Started Hostname Service.
- [ OK ] Started Samba NMB Daemon.
- Starting Samba SMB Daemon...
- [ OK ] Reached target Sound Card.
- [ OK ] Created slice system-udevil\x2dmount.slice.
- Starting Udevil mount service...
- Starting Udevil mount service...
- Starting Udevil mount service...
- Starting Udevil mount service...
- Starting Udevil mount service...
- Starting Udevil mount service...
- [ OK ] Started Udevil mount service.
- [ OK ] Started Samba SMB Daemon.
- [ OK ] Reached target Multi-User System.
- Starting Setup symlink for ARM Mali library...
- [ OK ] Started Setup symlink for ARM Mali library.
- [ OK ] Reached target Graphical Interface.
- Starting Kodi Media Center...
- [ OK ] Started Kodi Media Center.
- [ OK ] Reached target Kodi Mediacenter Interface.
- [ OK ] Stopped Kodi Media Center.
- Starting Kodi Media Center...
- [ OK ] Started Kodi Media Center.
- [ OK ] Stopped Kodi Media Center.
- Starting Kodi Media Center...
- [ OK ] Started Kodi Media Center.
- [ OK ] Stopped Kodi Media Center.
- Starting Kodi Media Center...
- [ OK ] Started Kodi Media Center.
- [ OK ] Stopped Kodi Media Center.
- Starting Kodi Media Center...
- [ OK ] Started Kodi Media Center.
- [
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement