Advertisement
Guest User

Untitled

a guest
May 20th, 2019
331
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.15 KB | None | 0 0
  1. Djeman ULC Bootloader, Revision 1.12 (buldo)
  2. Press W key to start on Wince Explorer.
  3. files: 88300044, address: 88300064, jump: 0
  4. Freq: 250000, Pbus: 183000000, Divisor: 366, Real freq: 249318
  5. ..............................................................ocr:C0FF8080
  6. High Capacity = 1
  7. CSD MMC spec version 4
  8. WR_REL_SET : 0x1F
  9. Freq: 26000000, Pbus: 183000000, Divisor: 3, Real freq: 22875000
  10. MMC/SD Bus Width : 8
  11. Initalizing USB subsystem
  12. USB0: USB EHCI 1.00
  13. scanning bus 0 for devices... 3 USB Device(s) found
  14. 1 Hub (480 Mb/s, 0mA)
  15. | Djeman EHCI Host Controller
  16. |
  17. +-2 Hub (480 Mb/s, 100mA)
  18. | USB2.0 HUB
  19. |
  20. +-3 Mass Storage (480 Mb/s, 500mA)
  21. Lexar USB Flash Drive AA12RFH3G9S7A3KX751L
  22.  
  23. Scanning Storage devices
  24. scanning usb for storage devices...
  25. 1 Storage Device(s) found
  26.  
  27. -------------------------------
  28. FAT Info:
  29. filesystem: FAT32
  30. sectorSize: 512
  31. sectorCount: 15632384
  32. clusterSize: 4096
  33. clusterCnt: 1949952
  34. fatSize: 15235
  35. numRootDirE: 0
  36. dirEPerSect: 16
  37. sectorsRoot: 0
  38. ReservedCnt: 2298
  39. fstDataSec: 32768
  40. sectPerClus: 8
  41. rootSector: 2048
  42. diskSize: 7816192K
  43. -------------------------------
  44. Finding file in USB mass storage device
  45.  
  46. ---------------------------------------------
  47. Loading Image: vmlinuz.elf (Format = ELF)
  48. .
  49. Image Loaded Successfully.
  50. ---------------------------------------------
  51. Try to load initramfs.ulc ...
  52. Program Entry Point: 808CF610
  53. Executing Application
  54. Linux version 4.9.170-lan5200wrx (oe-user@oe-host) (gcc version 8.2.0 (GCC) ) #1 Mon May 20 07:41:05 UTC 2019
  55. bootconsole [early0] enabled
  56. CPU0 revision is: 800c8001 (Au1300)
  57. **** LG LAN5200WRx Platform ****
  58. Determined physical RAM map:
  59. memory: 10000000 @ 00000000 (usable)
  60. memory: 10000000 @ 30000000 (usable)
  61. Initrd not found or empty - disabling initrd
  62. Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  63. Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  64. Zone ranges:
  65. Normal [mem 0x0000000000000000-0x000000001fffffff]
  66. HighMem [mem 0x0000000020000000-0x000000003fffffff]
  67. Movable zone start for each node
  68. Early memory node ranges
  69. node 0: [mem 0x0000000000000000-0x000000000fffffff]
  70. node 0: [mem 0x0000000030000000-0x000000003fffffff]
  71. Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
  72. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
  73. Kernel command line: root=/dev/ram console=ttyS2,115200n8 video=au1200fb:panel:bs
  74. PID hash table entries: 1024 (order: 0, 4096 bytes)
  75. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  76. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  77. Memory: 499352K/524288K available (8025K kernel code, 293K rwdata, 1388K rodata, 4492K init, 227K bss, 24936K reserved, 0K cma-reserved, 262144K highmem)
  78. NR_IRQS:136
  79. clocksource: alchemy-counter1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
  80. Alchemy clocksource installed
  81. sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
  82. Console: colour dummy device 80x25
  83. Calibrating delay loop (skipped) preset value.. 732.00 BogoMIPS (lpj=3660000)
  84. pid_max: default: 32768 minimum: 301
  85. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  86. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  87. devtmpfs: initialized
  88. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  89. futex hash table entries: 256 (order: -1, 3072 bytes)
  90. NET: Registered protocol family 16
  91. Alchemy clocktree installed
  92. vgaarb: loaded
  93. SCSI subsystem initialized
  94. usbcore: registered new interface driver usbfs
  95. usbcore: registered new interface driver hub
  96. usbcore: registered new device driver usb
  97. Advanced Linux Sound Architecture Driver Initialized.
  98. clocksource: Switched to clocksource alchemy-counter1
  99. NET: Registered protocol family 2
  100. TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  101. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  102. TCP: Hash tables configured (established 2048 bind 2048)
  103. UDP hash table entries: 256 (order: 0, 4096 bytes)
  104. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  105. NET: Registered protocol family 1
  106. RPC: Registered named UNIX socket transport module.
  107. RPC: Registered udp transport module.
  108. RPC: Registered tcp transport module.
  109. RPC: Registered tcp NFSv4.1 backchannel transport module.
  110. audit: initializing netlink subsys (disabled)
  111. audit: type=2000 audit(0.930:1): initialized
  112. workingset: timestamp_bits=14 max_order=17 bucket_order=3
  113. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  114. NFS: Registering the id_resolver key type
  115. Key type id_resolver registered
  116. Key type id_legacy registered
  117. nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  118. nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  119. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  120. jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  121. fuse init (API version 7.26)
  122. SGI XFS with ACLs, security attributes, no debug enabled
  123. NET: Registered protocol family 38
  124. bounce: pool size: 64 pages
  125. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  126. io scheduler noop registered (default)
  127. io scheduler deadline registered
  128. io scheduler cfq registered
  129. au1200fb: LCD controller driver for AU1200 processors
  130. au1200fb: Panel 9 DB1300_800x480
  131. au1200fb: Win 2 0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx
  132. Console: switching to colour frame buffer device 100x60
  133. Panel(DB1300_800x480), 800x480
  134. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  135. serial8250.8: ttyS0 at MMIO 0x10100000 (irq = 96, base_baud = 11437500) is a 16550A
  136. serial8250.8: ttyS1 at MMIO 0x10101000 (irq = 25, base_baud = 11437500) is a 16550A
  137. console [ttyS2] enabledMMIO 0x10102000 (irq = 33, base_baud = 11437500) is a 16550A
  138. console [ttyS2] enabled
  139. bootconsole [early0] disabled
  140. bootconsole [early0] disabled
  141. serial8250.8: ttyS3 at MMIO 0x10103000 (irq = 35, base_baud = 11437500) is a 16550A
  142. physmap platform flash device: 00400000 at 1fc00000
  143. physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a7
  144. Amd/Fujitsu Extended Query Table at 0x0040
  145. Amd/Fujitsu Extended Query version 1.1.
  146. physmap-flash.0: Swapping erase regions for top-boot CFI table.
  147. number of CFI chips: 1
  148. Creating 2 MTD partitions on "physmap-flash.0":
  149. 0x000000000000-0x000000300000 : "boot"
  150. 0x000000300000-0x000000400000 : "splash"
  151. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  152. ehci-pci: EHCI PCI platform driver
  153. ehci-platform: EHCI generic platform driver
  154. ehci-platform ehci-platform.0: EHCI Host Controller
  155. ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  156. ehci-platform ehci-platform.0: irq 98, io mem 0x14020000
  157. ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  158. hub 1-0:1.0: USB hub found
  159. hub 1-0:1.0: 2 ports detected
  160. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  161. ohci-pci: OHCI PCI platform driver
  162. ohci-platform: OHCI generic platform driver
  163. ohci-platform ohci-platform.0: Generic Platform OHCI controller
  164. ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
  165. ohci-platform ohci-platform.0: irq 98, io mem 0x14020400
  166. hub 2-0:1.0: USB hub found
  167. hub 2-0:1.0: 1 port detected
  168. ohci-platform ohci-platform.1: Generic Platform OHCI controller
  169. ohci-platform ohci-platform.1: new USB bus registered, assigned bus number 3
  170. ohci-platform ohci-platform.1: irq 98, io mem 0x14020800
  171. hub 3-0:1.0: USB hub found
  172. hub 3-0:1.0: 1 port detected
  173. usbcore: registered new interface driver usb-storage
  174. mousedev: PS/2 mouse device common for all mice
  175. rtc-au1xxx rtc-au1xxx: rtc core: registered rtc-au1xxx as rtc0
  176. i2c /dev entries driver
  177. hwmon_vid: Unknown VRM version of your CPU
  178. au1xxx-mmc: MMC Controller 0 set up at b0600000 (mode=dma)
  179. hidraw: raw HID events driver (C) Jiri Kosina
  180. usbcore: registered new interface driver usbhid
  181. usbhid: USB HID core driver
  182. wm8731 0-001b: Assuming static MCLK
  183. wm8731 0-001b: Failed to issue reset: -5
  184. wm8731: probe of 0-001b failed with error -5
  185. ipip: IPv4 and MPLS over IPv4 tunneling driver
  186. gre: GRE over IPv4 demultiplexor driver
  187. ip_gre: GRE over IPv4 tunneling driver
  188. Initializing XFRM netlink socket
  189. NET: Registered protocol family 10
  190. usb 1-2: new high-speed USB device number 2 using ehci-platform
  191. mip6: Mobile IPv6
  192. sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  193. ip6_gre: GRE over IPv6 tunneling driver
  194. NET: Registered protocol family 17
  195. Key type dns_resolver registered
  196. rtc-au1xxx rtc-au1xxx: setting system clock to 2019-05-20 07:47:32 UTC (1558338452)
  197. ALSA device list:
  198. No soundcards found.
  199. random: fast init done
  200. Warning: unable to open an initial console.
  201. Freeing unused kernel memory: 4492K
  202. This architecture does not have kernel memory protection.
  203. mmc0: new high speed MMC card at address 0001
  204. mmcblk0: mmc0:0001 P1XXXX 3.57 GiB
  205. mmcblk0boot0: mmc0:0001 P1XXXX partition 1 2.00 MiB
  206. mmcblk0boot1: mmc0:0001 P1XXXX partition 2 2.00 MiB
  207. mmcblk0: p1 p2 p3 p4
  208. hub 1-2:1.0: USB hub found
  209. hub 1-2:1.0: 4 ports detected
  210. usb 1-2.2: new high-speed USB device number 3 using ehci-platform
  211. usb-storage 1-2.2:1.0: USB Mass Storage device detected
  212. scsi host0: usb-storage 1-2.2:1.0
  213. udevd[90]: starting version 3.2.7
  214. random: udevd: uninitialized urandom read (16 bytes read)
  215. random: udevd: uninitialized urandom read (16 bytes read)
  216. random: udevd: uninitialized urandom read (16 bytes read)
  217. udevd[90]: specified group 'kvm' unknown
  218. udevd[91]: starting eudev-3.2.7
  219. scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6
  220. sd 0:0:0:0: [sda] 15634432 512-byte logical blocks: (8.00 GB/7.46 GiB)
  221. sd 0:0:0:0: Attached scsi generic sg0 type 0
  222. sd 0:0:0:0: [sda] Write Protect is off
  223. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  224. sda: sda1
  225. sd 0:0:0:0: [sda] Attached SCSI removable disk
  226. random: crng init done
  227. random: 3 urandom warning(s) missed due to ratelimiting
  228.  
  229. Poky (Yocto Project Reference Distro) 2.6.2 medianav /dev/ttyS2
  230.  
  231. medianav login: root
  232. root@medianav:~# cat /proc/meminfo
  233. MemTotal: 503844 kB
  234. MemFree: 475540 kB
  235. MemAvailable: 474488 kB
  236. Buffers: 0 kB
  237. Cached: 13940 kB
  238. SwapCached: 0 kB
  239. Active: 3684 kB
  240. Inactive: 11448 kB
  241. Active(anon): 1228 kB
  242. Inactive(anon): 76 kB
  243. Active(file): 2456 kB
  244. Inactive(file): 11372 kB
  245. Unevictable: 0 kB
  246. Mlocked: 0 kB
  247. HighTotal: 262144 kB
  248. HighFree: 247804 kB
  249. LowTotal: 241700 kB
  250. LowFree: 227736 kB
  251. SwapTotal: 0 kB
  252. SwapFree: 0 kB
  253. Dirty: 0 kB
  254. Writeback: 0 kB
  255. AnonPages: 1196 kB
  256. Mapped: 2788 kB
  257. Shmem: 112 kB
  258. Slab: 6392 kB
  259. SReclaimable: 1812 kB
  260. SUnreclaim: 4580 kB
  261. KernelStack: 384 kB
  262. PageTables: 144 kB
  263. NFS_Unstable: 0 kB
  264. Bounce: 0 kB
  265. WritebackTmp: 0 kB
  266. CommitLimit: 251920 kB
  267. Committed_AS: 3192 kB
  268. VmallocTotal: 778232 kB
  269. VmallocUsed: 0 kB
  270. VmallocChunk: 0 kB
  271. CmaTotal: 0 kB
  272. CmaFree: 0 kB
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement