Guest User

Untitled

a guest
Nov 22nd, 2016
121
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Linux version 2.6.18-416.el5 (mockbuild@x86-032.build.eng.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)) #1 SMP Wed Oct 26 12:04:18 EDT 2016
  2. Command line: ro root=LABEL=/ rhgb quiet crashkernel=1024M@16M
  3. BIOS-provided physical RAM map:
  4. BIOS-e820: 0000000000010000 - 000000000009bc00 (usable)
  5. BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
  6. BIOS-e820: 00000000000cc000 - 00000000000dc000 (reserved)
  7. BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  8. BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
  9. BIOS-e820: 00000000bfef0000 - 00000000bff03000 (ACPI data)
  10. BIOS-e820: 00000000bff03000 - 00000000bff04000 (ACPI NVS)
  11. BIOS-e820: 00000000bff04000 - 00000000c0000000 (reserved)
  12. BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  13. BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  14. BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  15. BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  16. BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
  17. DMI present.
  18. DMI: SGI.COM AltixXE250/X7DWN, BIOS 1.1b 08/06/2008
  19. ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f6540
  20. ACPI: XSDT (v001 SMCSLP SUPERMIC 0x06040000 LTP 0x00000000) @ 0x00000000bfefbe9a
  21. ACPI: FADT (v003 INTEL STOAKLEY 0x06040000 PTL 0x00000003) @ 0x00000000bff0239c
  22. ACPI: _MAR (v001 Intel OEMDMAR 0x06040000 LOHR 0x00000001) @ 0x00000000bff02490
  23. ACPI: TCPA (v001 Intel STOAKLEY 0x06040000 LOHR 0x0000005a) @ 0x00000000bff024c0
  24. ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000bff024f2
  25. ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x00000000bff025c6
  26. ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0x00000000bff02602
  27. ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000bff0263a
  28. ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000bff02662
  29. ACPI: ERST (v001 SMCI ERSTTBL 0x06040000 SMCI 0x00000001) @ 0x00000000bff026b2
  30. ACPI: HEST (v001 SMCI HESTTBL 0x06040000 SMCI 0x00000001) @ 0x00000000bff02c42
  31. ACPI: BERT (v001 SMCI BERTTBL 0x06040000 SMCI 0x00000001) @ 0x00000000bff02cea
  32. ACPI: EINJ (v001 SMCI EINJTBL 0x06040000 SMCI 0x00000001) @ 0x00000000bff02d1a
  33. ACPI: SLIC (v001 SMCSLP SUPERMIC 0x06040000 LTP 0x00000000) @ 0x00000000bff02e8a
  34. ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd7fd
  35. ACPI: SSDT (v001 PmRef Cpu7Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd757
  36. ACPI: SSDT (v001 PmRef Cpu6Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd6b1
  37. ACPI: SSDT (v001 PmRef Cpu5Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd60b
  38. ACPI: SSDT (v001 PmRef Cpu4Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd565
  39. ACPI: SSDT (v001 PmRef Cpu3Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd4bf
  40. ACPI: SSDT (v001 PmRef Cpu2Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd419
  41. ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050228) @ 0x00000000bfefd373
  42. ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x00000000bfefbf6e
  43. ACPI: DSDT (v001 Intel SEABURG 0x06040000 MSFT 0x03000001) @ 0x(null)
  44. No NUMA configuration found
  45. Faking a node at 0000000000000000-0000000440000000
  46. Bootmem setup node 0 0000000000000000-0000000440000000
  47. bootmap start 100000 pages 136
  48. crashkernel reservation failed - memory is in use
  49. Setting up node 0 0-440000
  50. On node 0 totalpages: 4131464
  51. DMA zone: 2400 pages, LIFO batch:0
  52. DMA32 zone: 767784 pages, LIFO batch:31
  53. Normal zone: 3361280 pages, LIFO batch:31
  54. ACPI: PM-Timer IO Port: 0x1008
  55. ACPI: Local APIC address 0xfee00000
  56. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  57. Processor #0 7:7 APIC version 20
  58. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
  59. Processor #4 7:7 APIC version 20
  60. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  61. Processor #1 7:7 APIC version 20
  62. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
  63. Processor #5 7:7 APIC version 20
  64. ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
  65. Processor #2 7:7 APIC version 20
  66. ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
  67. Processor #6 7:7 APIC version 20
  68. ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
  69. Processor #3 7:7 APIC version 20
  70. ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
  71. Processor #7 7:7 APIC version 20
  72. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  73. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  74. ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  75. ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  76. ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
  77. ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
  78. ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
  79. ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
  80. ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
  81. IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
  82. ACPI: IOAPIC (id[0x09] address[0xfec86000] gsi_base[24])
  83. IOAPIC[1]: apic_id 9, version 32, address 0xfec86000, GSI 24-47
  84. ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48])
  85. IOAPIC[2]: apic_id 10, version 32, address 0xfec89000, GSI 48-71
  86. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  87. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  88. ACPI: IRQ0 used by override.
  89. ACPI: IRQ2 used by override.
  90. ACPI: IRQ9 used by override.
  91. Setting APIC routing to physical flat
  92. ACPI: HPET id: 0x8086a201 base: 0xfed00000
  93. Using ACPI (MADT) for SMP configuration information
  94. Nosave address range: 000000000009b000 - 000000000009c000
  95. Nosave address range: 000000000009c000 - 00000000000a0000
  96. Nosave address range: 00000000000a0000 - 00000000000cc000
  97. Nosave address range: 00000000000cc000 - 00000000000dc000
  98. Nosave address range: 00000000000dc000 - 00000000000e0000
  99. Nosave address range: 00000000000e0000 - 0000000000100000
  100. Nosave address range: 00000000bfef0000 - 00000000bff03000
  101. Nosave address range: 00000000bff03000 - 00000000bff04000
  102. Nosave address range: 00000000bff04000 - 00000000c0000000
  103. Nosave address range: 00000000c0000000 - 00000000e0000000
  104. Nosave address range: 00000000e0000000 - 00000000f0000000
  105. Nosave address range: 00000000f0000000 - 00000000fec00000
  106. Nosave address range: 00000000fec00000 - 00000000fec10000
  107. Nosave address range: 00000000fec10000 - 00000000fee00000
  108. Nosave address range: 00000000fee00000 - 00000000fee01000
  109. Nosave address range: 00000000fee01000 - 00000000ff000000
  110. Nosave address range: 00000000ff000000 - 0000000100000000
  111. Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
  112. SMP: Allowing 8 CPUs, 0 hotplug CPUs
  113. Built 1 zonelists. Total pages: 4131464
  114. Kernel command line: ro root=LABEL=/ rhgb quiet crashkernel=1024M@16M
  115. Initializing CPU#0
  116. PID hash table entries: 4096 (order: 12, 32768 bytes)
  117. Console: colour VGA+ 80x25
  118. Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  119. Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  120. Checking aperture...
  121. ACPI: DMAR not present
  122. PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  123. Placing software IO TLB between 0x285d000 - 0x685d000
  124. Memory: 16431060k/17825792k available (2630k kernel code, 344600k reserved, 1678k data, 224k init)
  125. Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.99 BogoMIPS (lpj=2992498)
  126. Security Framework v1.0.0 initialized
  127. SELinux: Initializing.
  128. SELinux: Starting in permissive mode
  129. selinux_register_security: Registering secondary module capability
  130. Capability LSM initialized as secondary
  131. Mount-cache hash table entries: 256
  132. CPU: L1 I cache: 32K, L1 D cache: 32K
  133. CPU: L2 cache: 6144K
  134. using mwait in idle threads.
  135. CPU: Physical Processor ID: 0
  136. CPU: Processor Core ID: 0
  137. CPU0: Thermal monitoring enabled (TM2)
  138. SMP alternatives: switching to UP code
  139. ACPI: Core revision 20060707
  140. Using local APIC timer interrupts.
  141. Detected 24.937 MHz APIC timer.
  142. SMP alternatives: switching to SMP code
  143. Booting processor 1/8 APIC 0x4
  144. Initializing CPU#1
  145. Calibrating delay using timer specific routine.. 5985.04 BogoMIPS (lpj=2992524)
  146. CPU: L1 I cache: 32K, L1 D cache: 32K
  147. CPU: L2 cache: 6144K
  148. CPU: Physical Processor ID: 1
  149. CPU: Processor Core ID: 0
  150. CPU1: Thermal monitoring enabled (TM2)
  151. Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 06
  152. SMP alternatives: switching to SMP code
  153. Booting processor 2/8 APIC 0x1
  154. Initializing CPU#2
  155. Calibrating delay using timer specific routine.. 5985.01 BogoMIPS (lpj=2992509)
  156. CPU: L1 I cache: 32K, L1 D cache: 32K
  157. CPU: L2 cache: 6144K
  158. CPU: Physical Processor ID: 0
  159. CPU: Processor Core ID: 1
  160. CPU2: Thermal monitoring enabled (TM2)
  161. Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 0a
  162. SMP alternatives: switching to SMP code
  163. Booting processor 3/8 APIC 0x5
  164. Initializing CPU#3
  165. Calibrating delay using timer specific routine.. 5984.98 BogoMIPS (lpj=2992493)
  166. CPU: L1 I cache: 32K, L1 D cache: 32K
  167. CPU: L2 cache: 6144K
  168. CPU: Physical Processor ID: 1
  169. CPU: Processor Core ID: 1
  170. CPU3: Thermal monitoring enabled (TM2)
  171. Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 06
  172. SMP alternatives: switching to SMP code
  173. Booting processor 4/8 APIC 0x2
  174. Initializing CPU#4
  175. Calibrating delay using timer specific routine.. 5984.86 BogoMIPS (lpj=2992434)
  176. CPU: L1 I cache: 32K, L1 D cache: 32K
  177. CPU: L2 cache: 6144K
  178. CPU: Physical Processor ID: 0
  179. CPU: Processor Core ID: 2
  180. CPU4: Thermal monitoring enabled (TM2)
  181. Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 0a
  182. SMP alternatives: switching to SMP code
  183. Booting processor 5/8 APIC 0x6
  184. Initializing CPU#5
  185. Calibrating delay using timer specific routine.. 5985.00 BogoMIPS (lpj=2992502)
  186. CPU: L1 I cache: 32K, L1 D cache: 32K
  187. CPU: L2 cache: 6144K
  188. CPU: Physical Processor ID: 1
  189. CPU: Processor Core ID: 2
  190. CPU5: Thermal monitoring enabled (TM2)
  191. Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 06
  192. SMP alternatives: switching to SMP code
  193. Booting processor 6/8 APIC 0x3
  194. Initializing CPU#6
  195. Calibrating delay using timer specific routine.. 5985.00 BogoMIPS (lpj=2992500)
  196. CPU: L1 I cache: 32K, L1 D cache: 32K
  197. CPU: L2 cache: 6144K
  198. CPU: Physical Processor ID: 0
  199. CPU: Processor Core ID: 3
  200. CPU6: Thermal monitoring enabled (TM2)
  201. Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 0a
  202. SMP alternatives: switching to SMP code
  203. Booting processor 7/8 APIC 0x7
  204. Initializing CPU#7
  205. Calibrating delay using timer specific routine.. 5985.01 BogoMIPS (lpj=2992506)
  206. CPU: L1 I cache: 32K, L1 D cache: 32K
  207. CPU: L2 cache: 6144K
  208. CPU: Physical Processor ID: 1
  209. CPU: Processor Core ID: 3
  210. CPU7: Thermal monitoring enabled (TM2)
  211. Intel(R) Xeon(R) CPU E5472 @ 3.00GHz stepping 06
  212. Brought up 8 CPUs
  213. CPU#0: NMI watchdog performance counter calibration - 547->567
  214. CPU#1: NMI watchdog performance counter calibration - 60->80
  215. CPU#2: NMI watchdog performance counter calibration - 60->80
  216. CPU#3: NMI watchdog performance counter calibration - 60->80
  217. CPU#4: NMI watchdog performance counter calibration - 60->80
  218. CPU#5: NMI watchdog performance counter calibration - 60->80
  219. CPU#6: NMI watchdog performance counter calibration - 60->80
  220. CPU#7: NMI watchdog performance counter calibration - 60->80
  221. NMI watchdog testing PASSED.
  222. time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
  223. time.c: Detected 2992.498 MHz processor.
  224. sizeof(vma)=176 bytes
  225. sizeof(page)=56 bytes
  226. sizeof(inode)=560 bytes
  227. sizeof(dentry)=216 bytes
  228. sizeof(ext3inode)=760 bytes
  229. sizeof(buffer_head)=96 bytes
  230. sizeof(skbuff)=248 bytes
  231. migration_cost=10,9216
  232. checking if image is initramfs... it is
  233. Freeing initrd memory: 3594k freed
  234. NET: Registered protocol family 16
  235. ACPI: bus type pci registered
  236. Warning: pci_mmcfg_init marking 256MB space uncacheable.
  237. MCFG table requires 11MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on
  238. PCI: Using MMCONFIG at e0000000
  239. ACPI: Interpreter enabled
  240. ACPI: Using IOAPIC for interrupt routing
  241. ACPI: No dock devices found.
  242. ACPI: PCI Root Bridge [PCI0] (0000:00)
  243. pci 0000:00:0f.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
  244. pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
  245. pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
  246. pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
  247. pci 0000:00:1d.7: reg 10: [mem 0xda204000-0xda2043ff]
  248. pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
  249. pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
  250. pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
  251. pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
  252. pci 0000:00:1f.1: reg 20: [io 0x1860-0x186f]
  253. PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
  254. pci 0000:00:1f.2: reg 10: [io 0x18b0-0x18b7]
  255. pci 0000:00:1f.2: reg 14: [io 0x18a8-0x18ab]
  256. pci 0000:00:1f.2: reg 18: [io 0x18a0-0x18a7]
  257. pci 0000:00:1f.2: reg 1c: [io 0x1874-0x1877]
  258. pci 0000:00:1f.2: reg 20: [io 0x1880-0x189f]
  259. pci 0000:00:1f.2: reg 24: [mem 0xda204400-0xda2047ff]
  260. pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f]
  261. pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
  262. pci 0000:01:00.0: reg 14: [mem 0xd9d20000-0xd9d23fff 64bit]
  263. pci 0000:01:00.0: reg 1c: [mem 0xd9d00000-0xd9d0ffff 64bit]
  264. pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
  265. pci 0000:01:00.1: reg 10: [io 0x2400-0x24ff]
  266. pci 0000:01:00.1: reg 14: [mem 0xd9d24000-0xd9d27fff 64bit]
  267. pci 0000:01:00.1: reg 1c: [mem 0xd9d10000-0xd9d1ffff 64bit]
  268. pci 0000:01:00.1: reg 30: [mem 0x00000000-0x000fffff pref]
  269. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  270. pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
  271. pci 0000:00:01.0: bridge window [mem 0xd9d00000-0xd9dfffff]
  272. pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
  273. pci 0000:02:00.0: reg 14: [mem 0xd9f10000-0xd9f13fff 64bit]
  274. pci 0000:02:00.0: reg 1c: [mem 0xd9f00000-0xd9f0ffff 64bit]
  275. pci 0000:02:00.0: reg 30: [mem 0x00000000-0x001fffff pref]
  276. pci 0000:00:03.0: PCI bridge to [bus 02-02]
  277. pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
  278. pci 0000:00:03.0: bridge window [mem 0xd9f00000-0xd9ffffff]
  279. pci 0000:03:00.0: reg 10: [io 0x4000-0x40ff]
  280. pci 0000:03:00.0: reg 14: [mem 0xda020000-0xda023fff 64bit]
  281. pci 0000:03:00.0: reg 1c: [mem 0xda000000-0xda00ffff 64bit]
  282. pci 0000:03:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
  283. pci 0000:03:00.1: reg 10: [io 0x4400-0x44ff]
  284. pci 0000:03:00.1: reg 14: [mem 0xda024000-0xda027fff 64bit]
  285. pci 0000:03:00.1: reg 1c: [mem 0xda010000-0xda01ffff 64bit]
  286. pci 0000:03:00.1: reg 30: [mem 0x00000000-0x000fffff pref]
  287. pci 0000:00:05.0: PCI bridge to [bus 03-03]
  288. pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
  289. pci 0000:00:05.0: bridge window [mem 0xda000000-0xda0fffff]
  290. pci 0000:00:07.0: PCI bridge to [bus 04-07]
  291. pci 0000:00:07.0: bridge window [mem 0xd9a00000-0xd9bfffff]
  292. pci 0000:00:07.0: bridge window [mem 0xd9000000-0xd97fffff 64bit pref]
  293. pci 0000:04:00.0: PCI bridge to [bus 05-06]
  294. pci 0000:04:00.0: bridge window [mem 0xd9a00000-0xd9afffff]
  295. pci 0000:04:00.0: bridge window [mem 0xd9000000-0xd97fffff 64bit pref]
  296. pci 0000:06:00.0: reg 10: [mem 0xd9a00000-0xd9afffff 64bit]
  297. pci 0000:06:00.0: reg 18: [mem 0xd9000000-0xd97fffff 64bit pref]
  298. pci 0000:05:00.0: PCI bridge to [bus 06-06]
  299. pci 0000:05:00.0: bridge window [mem 0xd9a00000-0xd9afffff]
  300. pci 0000:05:00.0: bridge window [mem 0xd9000000-0xd97fffff 64bit pref]
  301. pci 0000:04:00.3: PCI bridge to [bus 07-07]
  302. pci 0000:08:00.0: reg 10: [mem 0xd9e20000-0xd9e3ffff]
  303. pci 0000:08:00.0: reg 14: [mem 0xd9e00000-0xd9e1ffff]
  304. pci 0000:08:00.0: reg 18: [io 0x5000-0x501f]
  305. pci 0000:08:00.0: reg 1c: [mem 0xd9e80000-0xd9e83fff]
  306. pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
  307. pci 0000:08:00.1: reg 10: [mem 0xd9e60000-0xd9e7ffff]
  308. pci 0000:08:00.1: reg 14: [mem 0xd9e40000-0xd9e5ffff]
  309. pci 0000:08:00.1: reg 18: [io 0x5020-0x503f]
  310. pci 0000:08:00.1: reg 1c: [mem 0xd9e84000-0xd9e87fff]
  311. pci 0000:08:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
  312. pci 0000:00:09.0: PCI bridge to [bus 08-08]
  313. pci 0000:00:09.0: bridge window [io 0x5000-0x5fff]
  314. pci 0000:00:09.0: bridge window [mem 0xd9e00000-0xd9efffff]
  315. pci 0000:09:00.0: reg 10: [mem 0xd8000000-0xd8ffffff 64bit pref]
  316. pci 0000:09:00.0: reg 18: [mem 0xd9c00000-0xd9cfffff 64bit]
  317. pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
  318. pci 0000:00:1c.0: PCI bridge to [bus 09-09]
  319. pci 0000:00:1c.0: bridge window [mem 0xd9c00000-0xd9cfffff]
  320. pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
  321. pci 0000:0a:01.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
  322. pci 0000:0a:01.0: reg 14: [io 0x6000-0x60ff]
  323. pci 0000:0a:01.0: reg 18: [mem 0xda100000-0xda10ffff]
  324. pci 0000:0a:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
  325. pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
  326. pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  327. pci 0000:00:1e.0: bridge window [mem 0xda100000-0xda1fffff]
  328. pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
  329. host bridge window [io 0x0000-0x0cf7] (ignored)
  330. host bridge window [io 0x0d00-0xffff] (ignored)
  331. host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  332. host bridge window [mem 0x000dc000-0x000dffff] (ignored)
  333. host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
  334. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  335. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  336. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
  337. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
  338. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  339. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.BMF0._PRT]
  340. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.BMF0.BPD0._PRT]
  341. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.BMF3._PRT]
  342. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
  343. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
  344. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  345. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
  346. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
  347. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
  348. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
  349. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
  350. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
  351. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
  352. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
  353. Linux Plug and Play Support v0.97 (c) Adam Belay
  354. pnp: PnP ACPI init
  355. pnp: PnP ACPI: found 12 devices
  356. usbcore: registered new driver usbfs
  357. usbcore: registered new driver hub
  358. PCI: Using ACPI for IRQ routing
  359. PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
  360. NetLabel: Initializing
  361. NetLabel: domain hash size = 128
  362. NetLabel: protocols = UNLABELED CIPSOv4
  363. NetLabel: unlabeled traffic allowed by default
  364. hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
  365. hpet0: 3 64-bit timers, 14318180 Hz
  366. ACPI: DMAR not present
  367. PCI-GART: No AMD northbridge found.
  368. system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
  369. system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
  370. system 00:01: iomem range 0xfec86000-0xfec86fff has been reserved
  371. system 00:01: iomem range 0xfec89000-0xfec89fff has been reserved
  372. pci 0000:01:00.0: BAR 6: assigned [mem 0xc2200000-0xc22fffff pref]
  373. pci 0000:01:00.1: BAR 6: assigned [mem 0xc2300000-0xc23fffff pref]
  374. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  375. pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
  376. pci 0000:00:01.0: bridge window [mem 0xd9d00000-0xd9dfffff]
  377. pci 0000:00:01.0: bridge window [mem 0xc2200000-0xc23fffff pref]
  378. pci 0000:02:00.0: BAR 6: assigned [mem 0xc2000000-0xc21fffff pref]
  379. pci 0000:00:03.0: PCI bridge to [bus 02-02]
  380. pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
  381. pci 0000:00:03.0: bridge window [mem 0xd9f00000-0xd9ffffff]
  382. pci 0000:00:03.0: bridge window [mem 0xc2000000-0xc21fffff pref]
  383. pci 0000:03:00.0: BAR 6: assigned [mem 0xc2400000-0xc24fffff pref]
  384. pci 0000:03:00.1: BAR 6: assigned [mem 0xc2500000-0xc25fffff pref]
  385. pci 0000:00:05.0: PCI bridge to [bus 03-03]
  386. pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
  387. pci 0000:00:05.0: bridge window [mem 0xda000000-0xda0fffff]
  388. pci 0000:00:05.0: bridge window [mem 0xc2400000-0xc25fffff pref]
  389. pci 0000:05:00.0: PCI bridge to [bus 06-06]
  390. pci 0000:05:00.0: bridge window [io disabled]
  391. pci 0000:05:00.0: bridge window [mem 0xd9a00000-0xd9afffff]
  392. pci 0000:05:00.0: bridge window [mem 0xd9000000-0xd97fffff 64bit pref]
  393. pci 0000:04:00.0: PCI bridge to [bus 05-06]
  394. pci 0000:04:00.0: bridge window [io disabled]
  395. pci 0000:04:00.0: bridge window [mem 0xd9a00000-0xd9afffff]
  396. pci 0000:04:00.0: bridge window [mem 0xd9000000-0xd97fffff 64bit pref]
  397. pci 0000:04:00.3: PCI bridge to [bus 07-07]
  398. pci 0000:04:00.3: bridge window [io disabled]
  399. pci 0000:04:00.3: bridge window [mem disabled]
  400. pci 0000:04:00.3: bridge window [mem pref disabled]
  401. pci 0000:00:07.0: PCI bridge to [bus 04-07]
  402. pci 0000:00:07.0: bridge window [io disabled]
  403. pci 0000:00:07.0: bridge window [mem 0xd9a00000-0xd9bfffff]
  404. pci 0000:00:07.0: bridge window [mem 0xd9000000-0xd97fffff 64bit pref]
  405. pci 0000:08:00.0: BAR 6: assigned [mem 0xc2600000-0xc261ffff pref]
  406. pci 0000:08:00.1: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref]
  407. pci 0000:00:09.0: PCI bridge to [bus 08-08]
  408. pci 0000:00:09.0: bridge window [io 0x5000-0x5fff]
  409. pci 0000:00:09.0: bridge window [mem 0xd9e00000-0xd9efffff]
  410. pci 0000:00:09.0: bridge window [mem 0xc2600000-0xc26fffff pref]
  411. pci 0000:09:00.0: BAR 6: mem pref was not allocated (size 0x0)
  412. pci 0000:00:1c.0: PCI bridge to [bus 09-09]
  413. pci 0000:00:1c.0: bridge window [io disabled]
  414. pci 0000:00:1c.0: bridge window [mem 0xd9c00000-0xd9cfffff]
  415. pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
  416. pci 0000:0a:01.0: BAR 6: assigned [mem 0xda120000-0xda13ffff pref]
  417. pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
  418. pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  419. pci 0000:00:1e.0: bridge window [mem 0xda100000-0xda1fffff]
  420. pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
  421. GSI 16 sharing vector 0xA9 and IRQ 16
  422. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 48 (level, low) -> IRQ 169
  423. pci 0000:00:01.0: setting latency timer to 64
  424. GSI 17 sharing vector 0xB1 and IRQ 17
  425. ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 50 (level, low) -> IRQ 177
  426. pci 0000:00:03.0: setting latency timer to 64
  427. GSI 18 sharing vector 0xB9 and IRQ 18
  428. ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 52 (level, low) -> IRQ 185
  429. pci 0000:00:05.0: setting latency timer to 64
  430. GSI 19 sharing vector 0xC1 and IRQ 19
  431. ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 54 (level, low) -> IRQ 193
  432. pci 0000:00:07.0: setting latency timer to 64
  433. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 54 (level, low) -> IRQ 193
  434. pci 0000:04:00.0: setting latency timer to 64
  435. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 54 (level, low) -> IRQ 193
  436. pci 0000:05:00.0: setting latency timer to 64
  437. pci 0000:04:00.3: setting latency timer to 64
  438. GSI 20 sharing vector 0xC9 and IRQ 20
  439. ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 56 (level, low) -> IRQ 201
  440. pci 0000:00:09.0: setting latency timer to 64
  441. GSI 21 sharing vector 0xD1 and IRQ 21
  442. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 209
  443. pci 0000:00:1c.0: setting latency timer to 64
  444. pci 0000:00:1e.0: setting latency timer to 64
  445. NET: Registered protocol family 2
  446. IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
  447. TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  448. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  449. TCP: Hash tables configured (established 262144 bind 65536)
  450. TCP reno registered
  451. Simple Boot Flag at 0x41 set to 0x80
  452. audit: initializing netlink socket (disabled)
  453. type=2000 audit(1479827013.939:1): initialized
  454. Total HugeTLB memory allocated, 0
  455. VFS: Disk quotas dquot_6.5.1
  456. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  457. SELinux: Registering netfilter hooks
  458. Initializing Cryptographic API
  459. alg: No test for crc32c (crc32c-generic)
  460. ksign: Installing public key data
  461. Loading keyring
  462. - Added public key 85B64DD492A69A1
  463. - User ID: Red Hat, Inc. (Kernel Module GPG key)
  464. io scheduler noop registered
  465. io scheduler anticipatory registered
  466. io scheduler deadline registered
  467. io scheduler cfq registered (default)
  468. Boot video device is 0000:0a:01.0
  469. pcieport-driver 0000:00:01.0: setting latency timer to 64
  470. pcieport-driver 0000:00:03.0: setting latency timer to 64
  471. pcieport-driver 0000:00:05.0: setting latency timer to 64
  472. pcieport-driver 0000:00:07.0: setting latency timer to 64
  473. pcieport-driver 0000:00:09.0: setting latency timer to 64
  474. pcieport-driver 0000:00:1c.0: setting latency timer to 64
  475. pcieport-driver 0000:04:00.0: setting latency timer to 64
  476. pcieport-driver 0000:05:00.0: setting latency timer to 64
  477. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  478. ACPI: Processor [CPU0] (supports 8 throttling states)
  479. ACPI: Processor [CPU1] (supports 8 throttling states)
  480. ACPI: Processor [CPU2] (supports 8 throttling states)
  481. ACPI: Processor [CPU3] (supports 8 throttling states)
  482. ACPI: Processor [CPU4] (supports 8 throttling states)
  483. ACPI: Processor [CPU5] (supports 8 throttling states)
  484. ACPI: Processor [CPU6] (supports 8 throttling states)
  485. ACPI: Processor [CPU7] (supports 8 throttling states)
  486. Real Time Clock Driver v1.12ac
  487. hpet_resources: 0xfed00000 is busy
  488. Non-volatile memory driver v1.2
  489. Linux agpgart interface v0.101 (c) Dave Jones
  490. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  491. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  492. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  493. 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  494. 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  495. brd: module loaded
  496. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  497. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  498. ESB2: IDE controller at PCI slot 0000:00:1f.1
  499. ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 209
  500. ESB2: chipset revision 9
  501. ESB2: not 100% native mode: will probe irqs later
  502. ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:pio, hdb:DMA
  503. Probing IDE interface ide0...
  504. hdb: MATSHITADVD-RAM UJ870PC, ATAPI CD/DVD-ROM drive
  505. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  506. Probing IDE interface ide1...
  507. ide-floppy driver 0.99.newide
  508. usbcore: registered new driver hiddev
  509. usbcore: registered new driver usbhid
  510. drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  511. PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
  512. serio: i8042 KBD port at 0x60,0x64 irq 1
  513. serio: i8042 AUX port at 0x60,0x64 irq 12
  514. mice: PS/2 mouse device common for all mice
  515. md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
  516. md: bitmap version 4.39
  517. TCP bic registered
  518. Initializing IPsec netlink socket
  519. NET: Registered protocol family 1
  520. NET: Registered protocol family 17
  521. ACPI: (supports S0 S1 S4 S5)
  522. Initalizing network drop monitor service
  523. Freeing unused kernel memory: 224k freed
  524. Write protecting the kernel read-only data: 533k
  525. input: AT Translated Set 2 keyboard as /class/input/input0
  526. GSI 22 sharing vector 0x5A and IRQ 22
  527. ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 90
  528. ehci_hcd 0000:00:1d.7: setting latency timer to 64
  529. ehci_hcd 0000:00:1d.7: EHCI Host Controller
  530. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  531. ehci_hcd 0000:00:1d.7: debug port 1
  532. ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  533. ehci_hcd 0000:00:1d.7: irq 90, io mem 0xda204000
  534. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  535. usb usb1: configuration #1 chosen from 1 choice
  536. hub 1-0:1.0: USB hub found
  537. hub 1-0:1.0: 6 ports detected
  538. ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  539. USB Universal Host Controller Interface driver v3.0
  540. GSI 23 sharing vector 0x62 and IRQ 23
  541. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 98
  542. uhci_hcd 0000:00:1d.0: setting latency timer to 64
  543. uhci_hcd 0000:00:1d.0: UHCI Host Controller
  544. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  545. uhci_hcd 0000:00:1d.0: irq 98, io base 0x00001800
  546. usb usb2: configuration #1 chosen from 1 choice
  547. hub 2-0:1.0: USB hub found
  548. hub 2-0:1.0: 2 ports detected
  549. GSI 24 sharing vector 0x6A and IRQ 24
  550. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 106
  551. uhci_hcd 0000:00:1d.1: setting latency timer to 64
  552. uhci_hcd 0000:00:1d.1: UHCI Host Controller
  553. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  554. uhci_hcd 0000:00:1d.1: irq 106, io base 0x00001820
  555. usb usb3: configuration #1 chosen from 1 choice
  556. hub 3-0:1.0: USB hub found
  557. hub 3-0:1.0: 2 ports detected
  558. usb 1-6: new high speed USB device using ehci_hcd and address 2
  559. GSI 25 sharing vector 0x72 and IRQ 25
  560. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 114
  561. uhci_hcd 0000:00:1d.2: setting latency timer to 64
  562. uhci_hcd 0000:00:1d.2: UHCI Host Controller
  563. uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  564. uhci_hcd 0000:00:1d.2: irq 114, io base 0x00001840
  565. usb usb4: configuration #1 chosen from 1 choice
  566. hub 4-0:1.0: USB hub found
  567. hub 4-0:1.0: 2 ports detected
  568. Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
  569. input: SynPS/2 Synaptics TouchPad as /class/input/input1
  570. SCSI subsystem initialized
  571. Fusion MPT base driver 3.04.20rh1
  572. Copyright (c) 1999-2008 LSI Corporation
  573. Fusion MPT SAS Host driver 3.04.20rh1
  574. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 50 (level, low) -> IRQ 177
  575. mptbase: ioc0: Initiating bringup
  576. usb 1-6: unable to read config index 0 descriptor/start
  577. usb 1-6: can't read configurations, error -71
  578. ioc0: LSISAS1068E B3: Capabilities={Initiator}
  579. mptsas 0000:02:00.0: setting latency timer to 64
  580. usb 1-6: new high speed USB device using ehci_hcd and address 3
  581. usb 1-6: device descriptor read/64, error -71
  582. usb 1-6: device descriptor read/64, error -71
  583. usb 1-6: new high speed USB device using ehci_hcd and address 4
  584. usb 1-6: unable to read config index 0 descriptor/all
  585. usb 1-6: can't read configurations, error -71
  586. usb 1-6: new high speed USB device using ehci_hcd and address 5
  587. usb 1-6: device descriptor read/8, error -71
  588. usb 1-6: device descriptor read/8, error -71
  589. scsi0 : ioc0: LSISAS1068E B3, FwRev=01170400h, Ports=1, MaxQ=286, IRQ=177
  590. mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 14, phy 0, sas_addr 0x4c3b401e6d79354f
  591. Vendor: ATA Model: ST500DM002-1BD14 Rev: KC43
  592. Type: Direct-Access ANSI SCSI revision: 05
  593. mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 5, phy 1, sas_addr 0x4c3b401d8e745a4c
  594. Vendor: ATA Model: ST500DM002-1BD14 Rev: KC43
  595. Type: Direct-Access ANSI SCSI revision: 05
  596. mptsas: ioc0: attaching raid volume, channel 1, id 4
  597. Vendor: LSILOGIC Model: Logical Volume Rev: 3000
  598. Type: Direct-Access ANSI SCSI revision: 02
  599. SCSI device sda: 976562176 512-byte hdwr sectors (500000 MB)
  600. sda: Write Protect is off
  601. sda: Mode Sense: 03 00 00 08
  602. SCSI device sda: drive cache: write through
  603. SCSI device sda: 976562176 512-byte hdwr sectors (500000 MB)
  604. sda: Write Protect is off
  605. sda: Mode Sense: 03 00 00 08
  606. SCSI device sda: drive cache: write through
  607. sda: sda1 sda2
  608. sd 0:1:4:0: Attached scsi disk sda
  609. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  610. libata version 3.00 loaded.
  611. ahci 0000:00:1f.2: version 3.0
  612. GSI 26 sharing vector 0x7A and IRQ 26
  613. ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 122
  614. ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
  615. ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
  616. ahci 0000:00:1f.2: setting latency timer to 64
  617. scsi1 : ahci
  618. scsi2 : ahci
  619. scsi3 : ahci
  620. scsi4 : ahci
  621. scsi5 : ahci
  622. scsi6 : ahci
  623. ata1: SATA max UDMA/133 abar m1024@0xda204400 port 0xda204500 irq 122
  624. ata2: SATA max UDMA/133 abar m1024@0xda204400 port 0xda204580 irq 122
  625. ata3: SATA max UDMA/133 abar m1024@0xda204400 port 0xda204600 irq 122
  626. ata4: SATA max UDMA/133 abar m1024@0xda204400 port 0xda204680 irq 122
  627. ata5: SATA max UDMA/133 abar m1024@0xda204400 port 0xda204700 irq 122
  628. ata6: SATA max UDMA/133 abar m1024@0xda204400 port 0xda204780 irq 122
  629. ata1: SATA link down (SStatus 0 SControl 300)
  630. ata2: SATA link down (SStatus 0 SControl 300)
  631. ata3: SATA link down (SStatus 0 SControl 300)
  632. ata4: SATA link down (SStatus 0 SControl 300)
  633. ata5: SATA link down (SStatus 0 SControl 300)
  634. ata6: SATA link down (SStatus 0 SControl 300)
  635. megasas: 00.00.06.15-rh1 Thu. May. 2 17:00:00 PDT 2013
  636. device-mapper: uevent: version 1.0.3
  637. device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
  638. device-mapper: dm-raid45: initialized v0.2594l
  639. kjournald starting. Commit interval 5 seconds
  640. EXT3-fs: mounted filesystem with ordered data mode.
  641. SELinux: Disabled at runtime.
  642. SELinux: Unregistering netfilter hooks
  643. type=1404 audit(1479827052.739:2): selinux=0 auid=4294967295 ses=4294967295
  644. input: PC Speaker as /class/input/input2
  645. dca service started, version 1.8
  646. intel_rng: FWH not detected
  647. EDAC MC: Ver: 2.0.1 Oct 26 2016
  648. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  649. All bugs added by David S. Miller <davem@redhat.com>
  650. GSI 27 sharing vector 0x82 and IRQ 27
  651. ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 130
  652. Fusion MPT FC Host driver 3.04.20rh1
  653. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 48 (level, low) -> IRQ 169
  654. mptbase: ioc1: Initiating bringup
  655. myri10ge: Version 1.5.2-1.459
  656. myri10ge: Illegal rssh hash type 5, defaulting to source port
  657. igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k1-1
  658. igb: Copyright (c) 2007-2012 Intel Corporation.
  659. hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
  660. Uniform CD-ROM driver Revision: 3.20
  661. ioc1: LSIFC949E: Capabilities={Initiator,Target,LAN}
  662. mptfc 0000:01:00.0: setting latency timer to 64
  663. scsi 0:0:0:0: Attached scsi generic sg0 type 0
  664. scsi 0:0:1:0: Attached scsi generic sg1 type 0
  665. sd 0:1:4:0: Attached scsi generic sg2 type 0
  666. scsi7 : ioc1: LSIFC949E, FwRev=01031500h, Ports=1, MaxQ=1023, IRQ=169
  667. mptfc: ioc1: FC Link Established, Speed = 4 Gbps
  668. GSI 28 sharing vector 0x8A and IRQ 28
  669. ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 58 (level, low) -> IRQ 138
  670. mptbase: ioc2: Initiating bringup
  671. ioc2: LSIFC949E: Capabilities={Initiator,Target,LAN}
  672. mptfc 0000:01:00.1: setting latency timer to 64
  673. Vendor: SGI Model: IS400 Rev: 0735
  674. Type: Direct-Access ANSI SCSI revision: 05
  675. scsi8 : ioc2: LSIFC949E, FwRev=01031500h, Ports=1, MaxQ=1023, IRQ=138
  676. sdb : very big device. try to use READ CAPACITY(16).
  677. mptfc: ioc2: FC Link Established, Speed = 4 Gbps
  678. SCSI device sdb: 15619784704 512-byte hdwr sectors (7997330 MB)
  679. sdb: Write Protect is off
  680. sdb: Mode Sense: 77 00 10 08
  681. SCSI device sdb: drive cache: write back w/ FUA
  682. ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 52 (level, low) -> IRQ 185
  683. mptbase: ioc3: Initiating bringup
  684. sdb : very big device. try to use READ CAPACITY(16).
  685. SCSI device sdb: 15619784704 512-byte hdwr sectors (7997330 MB)
  686. sdb: Write Protect is off
  687. sdb: Mode Sense: 77 00 10 08
  688. SCSI device sdb: drive cache: write back w/ FUA
  689. sdb:<5> Vendor: SGI Model: IS400 Rev: 0735
  690. Type: Direct-Access ANSI SCSI revision: 05
  691. sdc : very big device. try to use READ CAPACITY(16).
  692. SCSI device sdc: 15619784704 512-byte hdwr sectors (7997330 MB)
  693. sdc: Write Protect is off
  694. sdc: Mode Sense: 77 00 10 08
  695. SCSI device sdc: drive cache: write back w/ FUA
  696. sdc : very big device. try to use READ CAPACITY(16).
  697. SCSI device sdc: 15619784704 512-byte hdwr sectors (7997330 MB)
  698. sdc: Write Protect is off
  699. sdc: Mode Sense: 77 00 10 08
  700. SCSI device sdc: drive cache: write back w/ FUA
  701. sdc: sdc1
  702. sd 8:0:0:0: Attached scsi disk sdc
  703. sd 8:0:0:0: Attached scsi generic sg3 type 0
  704. sdb1
  705. sd 7:0:0:0: Attached scsi disk sdb
  706. sd 7:0:0:0: Attached scsi generic sg4 type 0
  707. Vendor: SGI Model: IS400 Rev: 0735
  708. Type: Direct-Access ANSI SCSI revision: 05
  709. sdd : very big device. try to use READ CAPACITY(16).
  710. SCSI device sdd: 15619784704 512-byte hdwr sectors (7997330 MB)
  711. sdd: Write Protect is off
  712. sdd: Mode Sense: 77 00 10 08
  713. SCSI device sdd: drive cache: write back w/ FUA
  714. sdd : very big device. try to use READ CAPACITY(16).
  715. SCSI device sdd: 15619784704 512-byte hdwr sectors (7997330 MB)
  716. sdd: Write Protect is off
  717. sdd: Mode Sense: 77 00 10 08
  718. SCSI device sdd: drive cache: write back w/ FUA
  719. sdd:<5> Vendor: SGI Model: IS400 Rev: 0735
  720. Type: Direct-Access ANSI SCSI revision: 05
  721. sde : very big device. try to use READ CAPACITY(16).
  722. SCSI device sde: 15619784704 512-byte hdwr sectors (7997330 MB)
  723. sde: Write Protect is off
  724. sde: Mode Sense: 77 00 10 08
  725. SCSI device sde: drive cache: write back w/ FUA
  726. sde : very big device. try to use READ CAPACITY(16).
  727. SCSI device sde: 15619784704 512-byte hdwr sectors (7997330 MB)
  728. sde: Write Protect is off
  729. sde: Mode Sense: 77 00 10 08
  730. SCSI device sde: drive cache: write back w/ FUA
  731. sde: unknown partition table
  732. sd 8:0:0:1: Attached scsi disk sdd
  733. sd 8:0:0:1: Attached scsi generic sg5 type 0
  734. Vendor: SGI Model: IS400 Rev: 0735
  735. Type: Direct-Access ANSI SCSI revision: 05
  736. sdf : very big device. try to use READ CAPACITY(16).
  737. SCSI device sdf: 11714838528 512-byte hdwr sectors (5997997 MB)
  738. sdf: Write Protect is off
  739. sdf: Mode Sense: 77 00 10 08
  740. SCSI device sdf: drive cache: write back w/ FUA
  741. sdf : very big device. try to use READ CAPACITY(16).
  742. SCSI device sdf: 11714838528 512-byte hdwr sectors (5997997 MB)
  743. sdf: Write Protect is off
  744. sdf: Mode Sense: 77 00 10 08
  745. SCSI device sdf: drive cache: write back w/ FUA
  746. sdf: unknown partition table
  747. sd 7:0:0:1: Attached scsi disk sde
  748. sd 7:0:0:1: Attached scsi generic sg6 type 0
  749. Vendor: SGI Model: IS400 Rev: 0735
  750. Type: Direct-Access ANSI SCSI revision: 05
  751. sdg : very big device. try to use READ CAPACITY(16).
  752. SCSI device sdg: 11714838528 512-byte hdwr sectors (5997997 MB)
  753. sdg: Write Protect is off
  754. sdg: Mode Sense: 77 00 10 08
  755. SCSI device sdg: drive cache: write back w/ FUA
  756. sdg : very big device. try to use READ CAPACITY(16).
  757. SCSI device sdg: 11714838528 512-byte hdwr sectors (5997997 MB)
  758. sdg: Write Protect is off
  759. sdg: Mode Sense: 77 00 10 08
  760. SCSI device sdg: drive cache: write back w/ FUA
  761. sdg: unknown partition table
  762. sd 8:0:0:2: Attached scsi disk sdf
  763. sd 8:0:0:2: Attached scsi generic sg7 type 0
  764. Vendor: SGI Model: IS400 Rev: 0735
  765. Type: Direct-Access ANSI SCSI revision: 05
  766. sdh : very big device. try to use READ CAPACITY(16).
  767. SCSI device sdh: 7809892352 512-byte hdwr sectors (3998665 MB)
  768. sdh: Write Protect is off
  769. sdh: Mode Sense: 77 00 10 08
  770. SCSI device sdh: drive cache: write back w/ FUA
  771. sdh : very big device. try to use READ CAPACITY(16).
  772. SCSI device sdh: 7809892352 512-byte hdwr sectors (3998665 MB)
  773. sdh: Write Protect is off
  774. sdh: Mode Sense: 77 00 10 08
  775. SCSI device sdh: drive cache: write back w/ FUA
  776. sdh: unknown partition table
  777. sd 7:0:0:2: Attached scsi disk sdg
  778. sd 7:0:0:2: Attached scsi generic sg8 type 0
  779. Vendor: SGI Model: IS400 Rev: 0735
  780. Type: Direct-Access ANSI SCSI revision: 05
  781. sdi : very big device. try to use READ CAPACITY(16).
  782. SCSI device sdi: 7809892352 512-byte hdwr sectors (3998665 MB)
  783. sdi: Write Protect is off
  784. sdi: Mode Sense: 77 00 10 08
  785. SCSI device sdi: drive cache: write back w/ FUA
  786. sdi : very big device. try to use READ CAPACITY(16).
  787. SCSI device sdi: 7809892352 512-byte hdwr sectors (3998665 MB)
  788. sdi: Write Protect is off
  789. sdi: Mode Sense: 77 00 10 08
  790. SCSI device sdi: drive cache: write back w/ FUA
  791. sdi: unknown partition table
  792. sd 8:0:0:3: Attached scsi disk sdh
  793. sd 8:0:0:3: Attached scsi generic sg9 type 0
  794. Vendor: SGI Model: Universal Xport Rev: 0735
  795. Type: Direct-Access ANSI SCSI revision: 05
  796. scsi 8:0:0:31: Attached scsi generic sg10 type 0
  797. unknown partition table
  798. sd 7:0:0:3: Attached scsi disk sdi
  799. sd 7:0:0:3: Attached scsi generic sg11 type 0
  800. Vendor: SGI Model: Universal Xport Rev: 0735
  801. Type: Direct-Access ANSI SCSI revision: 05
  802. scsi 7:0:0:31: Attached scsi generic sg12 type 0
  803. ioc3: LSIFC949E: Capabilities={Initiator,Target,LAN}
  804. mptfc 0000:03:00.0: setting latency timer to 64
  805. scsi9 : ioc3: LSIFC949E, FwRev=01031500h, Ports=1, MaxQ=1023, IRQ=185
  806. mptfc: ioc3: FC Link Established, Speed = 4 Gbps
  807. GSI 29 sharing vector 0x92 and IRQ 29
  808. ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 60 (level, low) -> IRQ 146
  809. mptbase: ioc4: Initiating bringup
  810. ioc4: LSIFC949E: Capabilities={Initiator,Target,LAN}
  811. mptfc 0000:03:00.1: setting latency timer to 64
  812. Vendor: SGI Model: IS400 Rev: 0735
  813. Type: Direct-Access ANSI SCSI revision: 05
  814. scsi10 : ioc4: LSIFC949E, FwRev=01031500h, Ports=1, MaxQ=1023, IRQ=146
  815. sdj : very big device. try to use READ CAPACITY(16).
  816. SCSI device sdj: 15619784704 512-byte hdwr sectors (7997330 MB)
  817. mptfc: ioc4: FC Link Established, Speed = 4 Gbps
  818. sdj: Write Protect is off
  819. sdj: Mode Sense: 77 00 10 08
  820. SCSI device sdj: drive cache: write back w/ FUA
  821. sdj : very big device. try to use READ CAPACITY(16).
  822. SCSI device sdj: 15619784704 512-byte hdwr sectors (7997330 MB)
  823. EDAC MC0: Giving out device to i5400_edac.c I5400: DEV 0000:00:10.0
  824. ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 56 (level, low) -> IRQ 201
  825. sdj: Write Protect is off
  826. igb 0000:08:00.0: Disabling ASPM L0s upstream switch port 0000:00:09.0
  827. sdj: Mode Sense: 77 00 10 08
  828. igb 0000:08:00.0: setting latency timer to 64
  829. SCSI device sdj: drive cache: write back w/ FUA
  830. sdj:<5> Vendor: SGI Model: IS400 Rev: 0735
  831. Type: Direct-Access ANSI SCSI revision: 05
  832. sdj1
  833. sd 9:0:0:0: Attached scsi disk sdj
  834. sd 9:0:0:0: Attached scsi generic sg13 type 0
  835. sdk : very big device. try to use READ CAPACITY(16).
  836. SCSI device sdk: 15619784704 512-byte hdwr sectors (7997330 MB)
  837. sdk: Write Protect is off
  838. sdk: Mode Sense: 77 00 10 08
  839. SCSI device sdk: drive cache: write back w/ FUA
  840. sdk : very big device. try to use READ CAPACITY(16).
  841. SCSI device sdk: 15619784704 512-byte hdwr sectors (7997330 MB)
  842. sdk: Write Protect is off
  843. sdk: Mode Sense: 77 00 10 08
  844. SCSI device sdk: drive cache: write back w/ FUA
  845. sdk: sdk1
  846. sd 10:0:0:0: Attached scsi disk sdk
  847. sd 10:0:0:0: Attached scsi generic sg14 type 0
  848. Vendor: SGI Model: IS400 Rev: 0735
  849. Type: Direct-Access ANSI SCSI revision: 05
  850. sdl : very big device. try to use READ CAPACITY(16).
  851. SCSI device sdl: 15619784704 512-byte hdwr sectors (7997330 MB)
  852. sdl: Write Protect is off
  853. sdl: Mode Sense: 77 00 10 08
  854. SCSI device sdl: drive cache: write back w/ FUA
  855. sdl : very big device. try to use READ CAPACITY(16).
  856. SCSI device sdl: 15619784704 512-byte hdwr sectors (7997330 MB)
  857. sdl: Write Protect is off
  858. sdl: Mode Sense: 77 00 10 08
  859. SCSI device sdl: drive cache: write back w/ FUA
  860. sdl: unknown partition table
  861. sd 9:0:0:1: Attached scsi disk sdl
  862. sd 9:0:0:1: Attached scsi generic sg15 type 0
  863. Vendor: SGI Model: IS400 Rev: 0735
  864. Type: Direct-Access ANSI SCSI revision: 05
  865. sdm : very big device. try to use READ CAPACITY(16).
  866. SCSI device sdm: 11714838528 512-byte hdwr sectors (5997997 MB)
  867. sdm: Write Protect is off
  868. sdm: Mode Sense: 77 00 10 08
  869. SCSI device sdm: drive cache: write back w/ FUA
  870. sdm : very big device. try to use READ CAPACITY(16).
  871. SCSI device sdm: 11714838528 512-byte hdwr sectors (5997997 MB)
  872. sdm: Write Protect is off
  873. sdm: Mode Sense: 77 00 10 08
  874. Vendor: SGI Model: IS400 Rev: 0735
  875. Type: Direct-Access ANSI SCSI revision: 05
  876. SCSI device sdm: drive cache: write back w/ FUA
  877. sdm: unknown partition table
  878. sd 9:0:0:2: Attached scsi disk sdm
  879. sd 9:0:0:2: Attached scsi generic sg16 type 0
  880. sdn : very big device. try to use READ CAPACITY(16).
  881. SCSI device sdn: 15619784704 512-byte hdwr sectors (7997330 MB)
  882. Vendor: SGI Model: IS400 Rev: 0735
  883. Type: Direct-Access ANSI SCSI revision: 05
  884. sdn: Write Protect is off
  885. sdn: Mode Sense: 77 00 10 08
  886. SCSI device sdn: drive cache: write back w/ FUA
  887. sdo : very big device. try to use READ CAPACITY(16).
  888. SCSI device sdo: 7809892352 512-byte hdwr sectors (3998665 MB)
  889. sdn : very big device. try to use READ CAPACITY(16).
  890. sdo: Write Protect is off
  891. sdo: Mode Sense: 77 00 10 08
  892. SCSI device sdn: 15619784704 512-byte hdwr sectors (7997330 MB)
  893. sdn: Write Protect is off
  894. sdn: Mode Sense: 77 00 10 08
  895. SCSI device sdo: drive cache: write back w/ FUA
  896. SCSI device sdn: drive cache: write back w/ FUA
  897. sdn: unknown partition table
  898. sd 10:0:0:1: Attached scsi disk sdn
  899. sd 10:0:0:1: Attached scsi generic sg17 type 0
  900. sdo : very big device. try to use READ CAPACITY(16).
  901. SCSI device sdo: 7809892352 512-byte hdwr sectors (3998665 MB)
  902. sdo: Write Protect is off
  903. sdo: Mode Sense: 77 00 10 08
  904. Vendor: SGI Model: IS400 Rev: 0735
  905. Type: Direct-Access ANSI SCSI revision: 05
  906. SCSI device sdo: drive cache: write back w/ FUA
  907. sdo: unknown partition table
  908. sd 9:0:0:3: Attached scsi disk sdo
  909. sd 9:0:0:3: Attached scsi generic sg18 type 0
  910. sdp : very big device. try to use READ CAPACITY(16).
  911. SCSI device sdp: 11714838528 512-byte hdwr sectors (5997997 MB)
  912. sdp: Write Protect is off
  913. sdp: Mode Sense: 77 00 10 08
  914. Vendor: SGI Model: Universal Xport Rev: 0735
  915. Type: Direct-Access ANSI SCSI revision: 05
  916. scsi 9:0:0:31: Attached scsi generic sg19 type 0
  917. SCSI device sdp: drive cache: write back w/ FUA
  918. sdp : very big device. try to use READ CAPACITY(16).
  919. SCSI device sdp: 11714838528 512-byte hdwr sectors (5997997 MB)
  920. sdp: Write Protect is off
  921. sdp: Mode Sense: 77 00 10 08
  922. SCSI device sdp: drive cache: write back w/ FUA
  923. sdp: unknown partition table
  924. sd 10:0:0:2: Attached scsi disk sdp
  925. sd 10:0:0:2: Attached scsi generic sg20 type 0
  926. Vendor: SGI Model: IS400 Rev: 0735
  927. Type: Direct-Access ANSI SCSI revision: 05
  928. sdq : very big device. try to use READ CAPACITY(16).
  929. SCSI device sdq: 7809892352 512-byte hdwr sectors (3998665 MB)
  930. sdq: Write Protect is off
  931. sdq: Mode Sense: 77 00 10 08
  932. SCSI device sdq: drive cache: write back w/ FUA
  933. sdq : very big device. try to use READ CAPACITY(16).
  934. SCSI device sdq: 7809892352 512-byte hdwr sectors (3998665 MB)
  935. sdq: Write Protect is off
  936. sdq: Mode Sense: 77 00 10 08
  937. SCSI device sdq: drive cache: write back w/ FUA
  938. sdq: unknown partition table
  939. sd 10:0:0:3: Attached scsi disk sdq
  940. sd 10:0:0:3: Attached scsi generic sg21 type 0
  941. Vendor: SGI Model: Universal Xport Rev: 0735
  942. Type: Direct-Access ANSI SCSI revision: 05
  943. scsi 10:0:0:31: Attached scsi generic sg22 type 0
  944. igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
  945. igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:c4:3d:8c
  946. igb 0000:08:00.0: eth0: PBA No: FFFFFF-0FF
  947. igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
  948. GSI 30 sharing vector 0xCA and IRQ 30
  949. ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 70 (level, low) -> IRQ 202
  950. igb 0000:08:00.1: Disabling ASPM L0s upstream switch port 0000:00:09.0
  951. igb 0000:08:00.1: setting latency timer to 64
  952. igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
  953. igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:c4:3d:8d
  954. igb 0000:08:00.1: eth1: PBA No: FFFFFF-0FF
  955. igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
  956. ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 209
  957. myri10ge 0000:09:00.0: setting latency timer to 64
  958. mtrr: type mismatch for d8000000,1000000 old: uncachable new: write-combining
  959. myri10ge 0000:09:00.0: PCIE x4 Link
  960. myri10ge 0000:09:00.0: MSI IRQ 67, tx bndry 4096, fw myri10ge_eth_z8e.dat, WC Disabled
  961. ib_mthca: Mellanox InfiniBand HCA driver v1.0-ofed1.5.4 (November 10, 2011)
  962. ib_mthca: Initializing 0000:06:00.0
  963. ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 54 (level, low) -> IRQ 193
  964. ib_mthca 0000:06:00.0: setting latency timer to 64
  965. floppy0: no floppy controllers found
  966. work still pending
  967. lp: driver loaded but no devices found
  968. NET: Registered protocol family 10
  969. lo: Disabled Privacy Extensions
  970. IPv6 over IPv4 tunneling driver
  971. sit0: Disabled Privacy Extensions
  972. mtrr: type mismatch for d0000000,2000000 old: uncachable new: write-combining
  973. Disabled lro on eth2
  974. ACPI: Power Button (FF) [PWRF]
  975. ACPI: Power Button (CM) [PWRB]
  976. ACPI: Mapper loaded
  977. dell-wmi: No known WMI GUID found
  978. md: Autodetecting RAID arrays.
  979. md: autorun ...
  980. md: ... autorun DONE.
  981. device-mapper: multipath: version 1.0.6 loaded
  982. device-mapper: multipath round-robin: version 1.0.0 loaded
  983. device-mapper: table: 253:3: multipath: error getting device
  984. device-mapper: ioctl: error adding target to table
  985. device-mapper: table: 253:3: multipath: error getting device
  986. device-mapper: ioctl: error adding target to table
  987. EXT3 FS on dm-0, internal journal
  988. kjournald starting. Commit interval 5 seconds
  989. EXT3 FS on sda1, internal journal
  990. EXT3-fs: mounted filesystem with ordered data mode.
  991. kjournald starting. Commit interval 5 seconds
  992. EXT3 FS on dm-2, internal journal
  993. EXT3-fs: mounted filesystem with ordered data mode.
  994. SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
  995. SGI XFS Quota Management subsystem
  996. Filesystem dm-13: Disabling barriers, trial barrier write failed
  997. XFS mounting filesystem dm-13
  998. Ending clean XFS mount for filesystem: dm-13
  999. Adding 33554424k swap on /dev/os/swap. Priority:-1 extents:1 across:33554424k
  1000. IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
  1001. microcode: CPU1 updated from revision 0x60b to 0x60f, date = 09292010
  1002. microcode: CPU7 updated from revision 0x60b to 0x60f, date = 09292010
  1003. microcode: CPU2 updated from revision 0xa07 to 0xa0b, date = 09282010
  1004. microcode: CPU3 updated from revision 0x60b to 0x60f, date = 09292010
  1005. microcode: CPU5 updated from revision 0x60b to 0x60f, date = 09292010
  1006. microcode: CPU4 updated from revision 0xa07 to 0xa0b, date = 09282010
  1007. microcode: CPU6 updated from revision 0xa07 to 0xa0b, date = 09282010
  1008. microcode: CPU0 updated from revision 0xa07 to 0xa0b, date = 09282010
  1009. NET: Registered protocol family 27
  1010. NET: Registered protocol family 28
  1011. NET: Registered protocol family 21
  1012. Loading iSCSI transport class v2.0-871.
  1013. iscsi: registered transport (iser)
  1014. Registered RDS/iwarp transport
  1015. Registered RDS/infiniband transport
  1016. libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
  1017. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
  1018. Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
  1019. iscsi: registered transport (cxgb3i)
  1020. cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
  1021. Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012)
  1022. iscsi: registered transport (bnx2i)
  1023. iscsi: registered transport (tcp)
  1024. iscsi: registered transport (be2iscsi)
  1025. ip6_tables: (C) 2000-2006 Netfilter Core Team
  1026. ip_tables: (C) 2000-2006 Netfilter Core Team
  1027. Netfilter messages via NETLINK v0.30.
  1028. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
  1029. 8021q: adding VLAN 0 to HW filter on device eth0
  1030. ADDRCONF(NETDEV_UP): eth0: link is not ready
  1031. igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
  1032. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1033. 8021q: adding VLAN 0 to HW filter on device eth1
  1034. ADDRCONF(NETDEV_UP): eth1: link is not ready
  1035. igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
  1036. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  1037. eth2: changing mtu from 9000 to 1500
  1038. myri10ge: eth2: link down
  1039. ADDRCONF(NETDEV_UP): ib0: link is not ready
  1040. ADDRCONF(NETDEV_CHANGE): ib0: link becomes ready
  1041. eth0: no IPv6 routers present
  1042. eth1: no IPv6 routers present
  1043. device-mapper: table: 253:14: multipath: error getting device
  1044. device-mapper: ioctl: error adding target to table
  1045. device-mapper: table: 253:14: multipath: error getting device
  1046. device-mapper: ioctl: error adding target to table
  1047. Bluetooth: Core ver 2.10
  1048. NET: Registered protocol family 31
  1049. Bluetooth: HCI device and connection manager initialized
  1050. Bluetooth: HCI socket layer initialized
  1051. Bluetooth: L2CAP ver 2.8
  1052. Bluetooth: L2CAP socket layer initialized
  1053. Bluetooth: RFCOMM socket layer initialized
  1054. Bluetooth: RFCOMM TTY layer initialized
  1055. Bluetooth: RFCOMM ver 1.8
  1056. eth2: no IPv6 routers present
  1057. ib0: no IPv6 routers present
  1058. Bluetooth: HIDP (Human Interface Emulation) ver 1.1
  1059. ipmi message handler version 39.1
  1060. IPMI System Interface driver.
  1061. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
  1062. ipmi: Found new BMC (man_id: 0x0028c5, prod_id: 0x0004, dev_id: 0x22)
  1063. IPMI kcs interface initialized
  1064. ipmi device interface
  1065. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  1066. NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  1067. NFSD: starting 90-second grace period
  1068. Worm initializing...<1>done.
  1069. i2c /dev entries driver
  1070. mtrr: type mismatch for d0000000,2000000 old: uncachable new: write-combining
  1071. nfsd: last server has exited
  1072. nfsd: unexporting all filesystems
  1073. md: md1 stopped.
  1074. md: bind<dm-11>
  1075. md: bind<dm-12>
  1076. md: raid1 personality registered for level 1
  1077. raid1: raid set md1 active with 2 out of 2 mirrors
  1078. Filesystem md1: Disabling barriers, trial barrier write failed
  1079. XFS mounting filesystem md1
  1080. Ending clean XFS mount for filesystem: md1
RAW Paste Data