API tools faq
paste
Guest User

Adata SU650

a guest
Apr 11th, 2020
15
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.79 KB | None | 0 0
raw download clone embed print report
  1. sudo smartctl -a /dev/sda
  2. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.23-1-MANJARO] (local build)
  3. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: ADATA SU650
  7. Serial Number: 2J0820057818
  8. LU WWN Device Id: 0 000000 000000000
  9. Firmware Version: V8X01c55
  10. User Capacity: 240,057,409,536 bytes [240 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: Solid State Device
  13. Form Factor: 2.5 inches
  14. Device is: Not in smartctl database [for details use: -P showall]
  15. ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Sat Apr 11 13:04:50 2020 UTC
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 1) seconds.
  33. Offline data collection
  34. capabilities: (0x59) SMART execute Offline immediate.
  35. No Auto Offline data collection support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0002) Does not save SMART data before
  43. entering power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 7) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 23) minutes.
  51. SCT capabilities: (0x0039) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
  60. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  61. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3703
  62. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 462
  63. 161 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  64. 162 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 25473
  65. 163 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 100
  66. 164 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 55
  67. 166 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 150
  68. 167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0
  69. 168 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  70. 169 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 100
  71. 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  72. 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  73. 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 98
  74. 175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
  75. 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 30934535
  76. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  77. 194 Temperature_Celsius 0x0022 100 100 030 Old_age Always - 43
  78. 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
  79. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  80. 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
  81. 206 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 37
  82. 207 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 75
  83. 232 Available_Reservd_Space 0x0032 100 100 000 Old_age Always - 100
  84. 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 3444
  85. 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 3182
  86. 249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 632
  87. 250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 4398
  88.  
  89. SMART Error Log Version: 1
  90. Warning: ATA error count 94 inconsistent with error log pointer 5
  91.  
  92. ATA Error Count: 94 (device log contains only the most recent five errors)
  93. CR = Command Register [HEX]
  94. FR = Features Register [HEX]
  95. SC = Sector Count Register [HEX]
  96. SN = Sector Number Register [HEX]
  97. CL = Cylinder Low Register [HEX]
  98. CH = Cylinder High Register [HEX]
  99. DH = Device/Head Register [HEX]
  100. DC = Device Command Register [HEX]
  101. ER = Error register [HEX]
  102. ST = Status register [HEX]
  103. Powered_Up_Time is measured from power on, and printed as
  104. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  105. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  106.  
  107. Error 94 occurred at disk power-on lifetime: 3205 hours (133 days + 13 hours)
  108. When the command that caused the error occurred, the device was active or idle.
  109.  
  110. After command completion occurred, registers were:
  111. ER ST SC SN CL CH DH
  112. -- -- -- -- -- -- --
  113. 40 41 20 28 31 38 40 Error: UNC at LBA = 0x00383128 = 3682600
  114.  
  115. Commands leading to the command that caused the error were:
  116. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  117. -- -- -- -- -- -- -- -- ---------------- --------------------
  118. 60 08 20 28 31 38 40 00 00:00:23.465 READ FPDMA QUEUED
  119. 60 08 80 30 ab 13 40 00 00:00:23.399 READ FPDMA QUEUED
  120. 60 02 78 40 6c 68 40 00 00:00:23.372 READ FPDMA QUEUED
  121. 60 08 70 d0 92 a7 40 00 00:00:23.358 READ FPDMA QUEUED
  122. 60 08 68 c8 92 a7 40 00 00:00:23.345 READ FPDMA QUEUED
  123.  
  124. Error 93 occurred at disk power-on lifetime: 3205 hours (133 days + 13 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 40 41 b8 28 31 38 40 Error: UNC at LBA = 0x00383128 = 3682600
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. 60 08 b8 28 31 38 40 00 00:00:23.116 READ FPDMA QUEUED
  136. 60 08 10 a0 92 a7 40 00 00:00:23.050 READ FPDMA QUEUED
  137. 60 02 08 a8 d2 5b 40 00 00:00:23.023 READ FPDMA QUEUED
  138. 60 02 f8 a0 d2 5b 40 00 00:00:23.009 READ FPDMA QUEUED
  139. 60 08 f0 98 92 a7 40 00 00:00:22.996 READ FPDMA QUEUED
  140.  
  141. Error 92 occurred at disk power-on lifetime: 3205 hours (133 days + 13 hours)
  142. When the command that caused the error occurred, the device was active or idle.
  143.  
  144. After command completion occurred, registers were:
  145. ER ST SC SN CL CH DH
  146. -- -- -- -- -- -- --
  147. 40 41 c0 28 31 38 40 Error: UNC at LBA = 0x00383128 = 3682600
  148.  
  149. Commands leading to the command that caused the error were:
  150. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  151. -- -- -- -- -- -- -- -- ---------------- --------------------
  152. 60 08 c0 28 31 38 40 00 00:00:22.758 READ FPDMA QUEUED
  153. 60 08 80 b0 9f a4 40 00 00:00:22.692 READ FPDMA QUEUED
  154. 60 02 78 a0 2e bc 40 00 00:00:22.679 READ FPDMA QUEUED
  155. 60 0f 70 b8 9f a4 40 00 00:00:22.679 READ FPDMA QUEUED
  156. 60 00 68 b8 9e a4 40 00 00:00:22.679 READ FPDMA QUEUED
  157.  
  158. Error 91 occurred at disk power-on lifetime: 3205 hours (133 days + 13 hours)
  159. When the command that caused the error occurred, the device was active or idle.
  160.  
  161. After command completion occurred, registers were:
  162. ER ST SC SN CL CH DH
  163. -- -- -- -- -- -- --
  164. 40 41 f0 28 31 38 40 Error: UNC at LBA = 0x00383128 = 3682600
  165.  
  166. Commands leading to the command that caused the error were:
  167. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  168. -- -- -- -- -- -- -- -- ---------------- --------------------
  169. 60 08 f0 28 31 38 40 00 00:00:22.408 READ FPDMA QUEUED
  170. 60 02 a8 08 db 20 40 00 00:00:22.343 READ FPDMA QUEUED
  171. 60 5a 98 c0 80 e8 40 00 00:00:22.343 READ FPDMA QUEUED
  172. 60 02 a0 d8 b8 2c 40 00 00:00:22.329 READ FPDMA QUEUED
  173. 60 08 90 c0 60 a6 40 00 00:00:22.315 READ FPDMA QUEUED
  174.  
  175. Error 90 occurred at disk power-on lifetime: 3205 hours (133 days + 13 hours)
  176. When the command that caused the error occurred, the device was active or idle.
  177.  
  178. After command completion occurred, registers were:
  179. ER ST SC SN CL CH DH
  180. -- -- -- -- -- -- --
  181. 40 41 78 20 31 38 40 Error: UNC at LBA = 0x00383120 = 3682592
  182.  
  183. Commands leading to the command that caused the error were:
  184. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  185. -- -- -- -- -- -- -- -- ---------------- --------------------
  186. 60 40 78 20 31 38 40 00 00:00:22.055 READ FPDMA QUEUED
  187. 60 08 a8 d8 eb 73 40 00 00:00:21.395 READ FPDMA QUEUED
  188. 60 08 98 f8 8d a7 40 00 00:00:21.265 READ FPDMA QUEUED
  189. 60 08 a0 d0 65 74 40 00 00:00:21.264 READ FPDMA QUEUED
  190. 61 08 90 10 1a 05 40 00 00:00:21.264 WRITE FPDMA QUEUED
  191.  
  192. SMART Self-test log structure revision number 1
  193. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  194. # 1 Short offline Aborted by host 20% 3619 -
  195. # 2 Extended offline Aborted by host 60% 3619 -
  196. # 3 Extended offline Completed without error 00% 3470 -
  197. # 4 Short offline Completed without error 00% 2277 -
  198.  
  199. SMART Selective self-test log data structure revision number 0
  200. Note: revision number not 1 implies that no selective self-test has ever been run
  201. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  202. 1 0 0 Not_testing
  203. 2 0 0 Not_testing
  204. 3 0 0 Not_testing
  205. 4 0 0 Not_testing
  206. 5 0 0 Not_testing
  207. Selective self-test flags (0x0):
  208. After scanning selected spans, do NOT read-scan remainder of disk.
  209. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!