Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- "/Users/michael/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude" "-C/Users/michael/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf" -v -patmega328p -cstk500v1 -P/dev/cu.usbmodem14101 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xFD:m -Uhfuse:w:0xDE:m -Ulfuse:w:0xFF:m
- avrdude: Version 6.3-20190619
- Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
- Copyright (c) 2007-2014 Joerg Wunsch
- System wide configuration file is "/Users/michael/Library/Arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf"
- User configuration file is "/Users/michael/.avrduderc"
- User configuration file does not exist or is not a regular file, skipping
- Using Port : /dev/cu.usbmodem14101
- Using Programmer : stk500v1
- Overriding Baud Rate : 19200
- AVR Part : ATmega328P
- Chip Erase delay : 9000 us
- PAGEL : PD7
- BS2 : PC2
- RESET disposition : dedicated
- RETRY pulse : SCK
- serial program mode : yes
- parallel program mode : yes
- Timeout : 200
- StabDelay : 100
- CmdexeDelay : 25
- SyncLoops : 32
- ByteDelay : 0
- PollIndex : 3
- PollValue : 0x53
- Memory Detail :
- Block Poll Page Polled
- Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
- ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
- eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
- flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
- lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
- hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
- efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
- lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
- calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
- signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
- Programmer Type : STK500
- Description : Atmel STK500 Version 1.x firmware
- Hardware Version: 2
- Firmware Version: 1.18
- Topcard : Unknown
- Vtarget : 0.0 V
- Varef : 0.0 V
- Oscillator : Off
- SCK period : 0.1 us
- avrdude: AVR device initialized and ready to accept instructions
- Reading | ################################################## | 100% 0.02s
- avrdude: Device signature = 0x1e9801 (probably m2560)
- avrdude: Expected signature for ATmega328P is 1E 95 0F
- Double check chip, or use -F to override this check.
- avrdude done. Thank you.
- Failed chip erase: uploading error: exit status 1
Add Comment
Please, Sign In to add comment