API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 9th, 2023
55
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.44 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 5.10.176 (hadis@archDesktop) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20134-5f15225c1e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Thu Apr 27 20:28:15 2023
  2. [ 0.000000] Board has DDR2
  3. [ 0.000000] Analog PMU set to hw control
  4. [ 0.000000] Digital PMU set to hw control
  5. [ 0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
  6. [ 0.000000] printk: bootconsole [early0] enabled
  7. [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
  8. [ 0.000000] MIPS: machine is flashforge adventurer 3
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  11. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  18. [ 0.000000] On node 0 totalpages: 16384
  19. [ 0.000000] Normal zone: 144 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
  25. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  26. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  27. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
  28. [ 0.000000] Writing ErrCtl register=00005d8d
  29. [ 0.000000] Readback ErrCtl register=00005d8d
  30. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  31. [ 0.000000] Memory: 53476K/65536K available (5322K kernel code, 614K rwdata, 1128K rodata, 4064K init, 201K bss, 12060K reserved, 0K cma-reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS: 256
  34. [ 0.000000] intc: using register map from devicetree
  35. [ 0.000000] CPU Clock: 580MHz
  36. [ 0.000000] timer_probe: no matching timers found
  37. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  38. [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  39. [ 0.007644] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  40. [ 0.073588] pid_max: default: 32768 minimum: 301
  41. [ 0.078253] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  42. [ 0.085269] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  43. [ 0.095436] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  44. [ 0.107590] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  45. [ 0.117109] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  46. [ 0.123753] pinctrl core: initialized pinctrl subsystem
  47. [ 0.129220] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT
  48. [ 0.130636] NET: Registered protocol family 16
  49. [ 0.148708] rt2880-pinmux pinctrl: try to register 47 pins ...
  50. [ 0.148734] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
  51. [ 0.148747] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
  52. [ 0.148757] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
  53. [ 0.148768] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
  54. [ 0.148779] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
  55. [ 0.148790] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
  56. [ 0.148800] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
  57. [ 0.148869] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
  58. [ 0.148880] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
  59. [ 0.148890] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
  60. [ 0.148901] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
  61. [ 0.148912] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
  62. [ 0.148923] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
  63. [ 0.148934] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
  64. [ 0.148945] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
  65. [ 0.148963] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
  66. [ 0.148973] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
  67. [ 0.148983] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
  68. [ 0.148992] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
  69. [ 0.149002] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
  70. [ 0.149011] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
  71. [ 0.149021] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
  72. [ 0.149030] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
  73. [ 0.149039] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
  74. [ 0.149049] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
  75. [ 0.149060] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
  76. [ 0.149070] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
  77. [ 0.149079] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
  78. [ 0.149089] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
  79. [ 0.149099] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
  80. [ 0.149108] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
  81. [ 0.149117] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
  82. [ 0.149127] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
  83. [ 0.149136] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
  84. [ 0.149146] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
  85. [ 0.149157] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
  86. [ 0.149168] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
  87. [ 0.149179] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
  88. [ 0.149189] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
  89. [ 0.149198] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
  90. [ 0.149209] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
  91. [ 0.149220] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
  92. [ 0.149231] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
  93. [ 0.149242] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
  94. [ 0.149252] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
  95. [ 0.149263] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
  96. [ 0.149273] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
  97. [ 0.149417] pinctrl core: add 9 pinctrl maps
  98. [ 0.149450] rt2880-pinmux pinctrl: found group selector 14 for gpio
  99. [ 0.149464] rt2880-pinmux pinctrl: found group selector 5 for refclk
  100. [ 0.149478] rt2880-pinmux pinctrl: found group selector 11 for i2s
  101. [ 0.149493] rt2880-pinmux pinctrl: found group selector 13 for spis
  102. [ 0.149508] rt2880-pinmux pinctrl: found group selector 15 for wled_an
  103. [ 0.149521] rt2880-pinmux pinctrl: found group selector 7 for wdt
  104. [ 0.149535] rt2880-pinmux pinctrl: found group selector 4 for i2c
  105. [ 0.149548] rt2880-pinmux pinctrl: found group selector 3 for uart1
  106. [ 0.149561] rt2880-pinmux pinctrl: found group selector 0 for pwm1
  107. [ 0.149579] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
  108. [ 0.149596] rt2880-pinmux pinctrl: request pin 37 (io37) for pinctrl
  109. [ 0.149609] rt2880-pinmux pinctrl: request pin 0 (io0) for pinctrl
  110. [ 0.149622] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl
  111. [ 0.149635] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl
  112. [ 0.149647] rt2880-pinmux pinctrl: request pin 3 (io3) for pinctrl
  113. [ 0.149661] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
  114. [ 0.149675] rt2880-pinmux pinctrl: request pin 15 (io15) for pinctrl
  115. [ 0.149689] rt2880-pinmux pinctrl: request pin 16 (io16) for pinctrl
  116. [ 0.149702] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
  117. [ 0.149716] rt2880-pinmux pinctrl: request pin 44 (io44) for pinctrl
  118. [ 0.149731] rt2880-pinmux pinctrl: request pin 38 (io38) for pinctrl
  119. [ 0.149746] rt2880-pinmux pinctrl: request pin 4 (io4) for pinctrl
  120. [ 0.149760] rt2880-pinmux pinctrl: request pin 5 (io5) for pinctrl
  121. [ 0.149774] rt2880-pinmux pinctrl: request pin 45 (io45) for pinctrl
  122. [ 0.149785] rt2880-pinmux pinctrl: request pin 46 (io46) for pinctrl
  123. [ 0.149801] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl
  124. [ 0.149814] rt2880-pinmux pinctrl: failed to lookup the sleep state
  125. [ 0.219016] clocksource: Switched to clocksource MIPS
  126. [ 0.225393] NET: Registered protocol family 2
  127. [ 0.229930] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  128. [ 0.237690] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  129. [ 0.245881] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  130. [ 0.253268] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
  131. [ 0.260051] TCP: Hash tables configured (established 1024 bind 1024)
  132. [ 0.266335] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  133. [ 0.272668] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  134. [ 0.279732] NET: Registered protocol family 1
  135. [ 0.283919] PCI: CLS 0 bytes, default 32
  136. [ 6.126892] workingset: timestamp_bits=14 max_order=14 bucket_order=0
  137. [ 6.138604] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  138. [ 6.144268] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  139. [ 6.158084] mt7621_gpio 10000600.gpio: registering 32 gpios
  140. [ 6.163779] mt7621_gpio 10000600.gpio: registering 32 gpios
  141. [ 6.169466] mt7621_gpio 10000600.gpio: registering 32 gpios
  142. [ 6.175134] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  143. [ 6.181873] serial8250 serial8250: no of_node; not parsing pinctrl DT
  144. [ 6.182182] pinctrl core: add 1 pinctrl maps
  145. [ 6.182228] rt2880-pinmux pinctrl: found group selector 10 for uart0
  146. [ 6.182248] rt2880-pinmux pinctrl: request pin 12 (io12) for 10000c00.uartlite
  147. [ 6.182263] rt2880-pinmux pinctrl: request pin 13 (io13) for 10000c00.uartlite
  148. [ 6.182559] printk: console [ttyS0] disabled
  149. [ 6.186729] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
  150. [ 6.195518] printk: console [ttyS0] enabled
  151. [ 6.203924] printk: bootconsole [early0] disabled
  152. [ 6.213906] pinctrl core: add 1 pinctrl maps
  153. [ 6.213953] rt2880-pinmux pinctrl: found group selector 2 for uart2
  154. [ 6.213974] rt2880-pinmux pinctrl: request pin 20 (io20) for 10000e00.uart2
  155. [ 6.213989] rt2880-pinmux pinctrl: request pin 21 (io21) for 10000e00.uart2
  156. [ 6.214375] 10000e00.uart2: ttyS1 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
  157. [ 6.224788] pinctrl core: add 1 pinctrl maps
  158. [ 6.224823] pinctrl core: add 1 pinctrl maps
  159. [ 6.224868] rt2880-pinmux pinctrl: found group selector 8 for spi
  160. [ 6.224893] rt2880-pinmux pinctrl: found group selector 12 for spi cs1
  161. [ 6.224914] rt2880-pinmux pinctrl: request pin 7 (io7) for 10000b00.spi
  162. [ 6.224929] rt2880-pinmux pinctrl: request pin 8 (io8) for 10000b00.spi
  163. [ 6.224943] rt2880-pinmux pinctrl: request pin 9 (io9) for 10000b00.spi
  164. [ 6.224957] rt2880-pinmux pinctrl: request pin 10 (io10) for 10000b00.spi
  165. [ 6.224975] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
  166. [ 6.225064] spi-mt7621 10000b00.spi: sys_freq: 193333333
  167. [ 6.246694] spi-nor spi0.0: found s25fl064k, expected mx25l6405d
  168. [ 6.253478] spi-nor spi0.0: s25fl064k (8192 Kbytes)
  169. [ 6.258506] 4 fixed-partitions partitions found on MTD device spi0.0
  170. [ 6.265090] OF: Bad cell count for /palmbus@10000000/spi@b00/mx25l6405d@0/partitions
  171. [ 6.272993] OF: Bad cell count for /palmbus@10000000/spi@b00/mx25l6405d@0/partitions
  172. [ 6.281441] OF: Bad cell count for /palmbus@10000000/spi@b00/mx25l6405d@0/partitions
  173. [ 6.289386] OF: Bad cell count for /palmbus@10000000/spi@b00/mx25l6405d@0/partitions
  174. [ 6.297493] Creating 4 MTD partitions on "spi0.0":
  175. [ 6.302413] 0x000000000000-0x000000030000 : "u-boot"
  176. [ 6.311030] 0x000000030000-0x000000040000 : "u-boot-env"
  177. [ 6.317680] 0x000000040000-0x000000050000 : "factory"
  178. [ 6.326025] 0x000000050000-0x000000800000 : "firmware"
  179. [ 6.332791] 2 uimage-fw partitions found on MTD device firmware
  180. [ 6.338817] Creating 2 MTD partitions on "firmware":
  181. [ 6.343932] 0x000000000000-0x000000138809 : "kernel"
  182. [ 6.348966] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
  183. [ 6.360538] 0x000000138809-0x0000007b0000 : "rootfs"
  184. [ 6.365594] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
  185. [ 6.376219] mtd: setting mtd5 (rootfs) as root device
  186. [ 6.382485] 1 squashfs-split partitions found on MTD device rootfs
  187. [ 6.388787] 0x000000500000-0x0000007b0000 : "rootfs_data"
  188. [ 6.447189] rt3050-esw 10110000.esw: mediatek esw at 0xb0110000, irq 25 initialized
  189. [ 6.455915] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  190. [ 6.466243] NET: Registered protocol family 10
  191. [ 6.476480] Segment Routing with IPv6
  192. [ 6.480439] NET: Registered protocol family 17
  193. [ 6.485041] 8021q: 802.1Q VLAN Support v1.8
  194. [ 6.513618] Freeing unused kernel memory: 4064K
  195. [ 6.518231] This architecture does not have kernel memory protection.
  196. [ 6.524806] Run /init as init process
  197. [ 6.528514] with arguments:
  198. [ 6.528521] /init
  199. [ 6.528526] with environment:
  200. [ 6.528532] HOME=/
  201. [ 6.528537] TERM=linux
  202. [ 7.038566] init: Console is alive
  203. [ 7.042762] init: - watchdog -
  204. [ 7.087313] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  205. [ 7.112590] usbcore: registered new interface driver usbfs
  206. [ 7.118283] usbcore: registered new interface driver hub
  207. [ 7.123858] usbcore: registered new device driver usb
  208. [ 7.137842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  209. [ 7.155048] SCSI subsystem initialized
  210. [ 7.166309] fsl-ehci: Freescale EHCI Host controller driver
  211. [ 7.175507] ehci-platform: EHCI generic platform driver
  212. [ 7.191411] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
  213. [ 7.198221] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
  214. [ 7.203530] ehci-platform 101c0000.ehci: EHCI Host Controller
  215. [ 7.209396] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  216. [ 7.217577] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  217. [ 7.249047] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  218. [ 7.256583] hub 1-0:1.0: USB hub found
  219. [ 7.261414] hub 1-0:1.0: 1 port detected
  220. [ 7.272060] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  221. [ 7.282724] ohci-platform: OHCI generic platform driver
  222. [ 7.288466] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  223. [ 7.295475] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  224. [ 7.303661] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  225. [ 7.384189] hub 2-0:1.0: USB hub found
  226. [ 7.388943] hub 2-0:1.0: 1 port detected
  227. [ 7.412088] pinctrl core: add 1 pinctrl maps
  228. [ 7.412149] rt2880-pinmux pinctrl: found group selector 9 for sdmode
  229. [ 7.412170] rt2880-pinmux pinctrl: request pin 22 (io22) for 10130000.sdhci
  230. [ 7.412185] rt2880-pinmux pinctrl: request pin 23 (io23) for 10130000.sdhci
  231. [ 7.412199] rt2880-pinmux pinctrl: request pin 24 (io24) for 10130000.sdhci
  232. [ 7.412213] rt2880-pinmux pinctrl: request pin 25 (io25) for 10130000.sdhci
  233. [ 7.412227] rt2880-pinmux pinctrl: request pin 26 (io26) for 10130000.sdhci
  234. [ 7.412241] rt2880-pinmux pinctrl: request pin 27 (io27) for 10130000.sdhci
  235. [ 7.412255] rt2880-pinmux pinctrl: request pin 28 (io28) for 10130000.sdhci
  236. [ 7.412269] rt2880-pinmux pinctrl: request pin 29 (io29) for 10130000.sdhci
  237. [ 7.440799] usbcore: registered new interface driver usb-storage
  238. [ 7.452502] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  239. [ 7.470509] init: - preinit -
  240. [ 7.569134] usb 1-1: new high-speed USB device number 2 using ehci-platform
  241. [ 7.793325] random: procd: uninitialized urandom read (4 bytes read)
  242. [ 7.800552] usb-storage 1-1:1.0: USB Mass Storage device detected
  243. [ 7.811260] random: jshn: uninitialized urandom read (4 bytes read)
  244. [ 7.830419] scsi host0: usb-storage 1-1:1.0
  245. [ 7.942712] random: jshn: uninitialized urandom read (4 bytes read)
  246. [ 8.984175] scsi 0:0:0:0: Direct-Access 4096 PQ: 0 ANSI: 0 CCS
  247. [ 8.994258] sd 0:0:0:0: no of_node; not parsing pinctrl DT
  248. [ 8.996456] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
  249. [ 9.005474] sd 0:0:0:0: [sda] Write Protect is off
  250. [ 9.010446] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  251. [ 9.011824] sd 0:0:0:0: [sda] No Caching mode page found
  252. [ 9.017233] sd 0:0:0:0: [sda] Assuming drive cache: write through
  253. [ 9.030351] sda: sda1
  254. [ 9.037966] sd 0:0:0:0: [sda] Attached SCSI removable disk
  255. [ 10.377410] rt3050-esw 10110000.esw: port 0 link up
  256. [ 10.382457] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  257. [ 12.324424] procd: - early -
  258. [ 12.327811] procd: - watchdog -
  259. [ 12.998476] procd: - watchdog -
  260. [ 13.002258] procd: - ubus -
  261. [ 13.016046] random: ubusd: uninitialized urandom read (4 bytes read)
  262. [ 13.056747] random: ubusd: uninitialized urandom read (4 bytes read)
  263. [ 13.063962] random: ubusd: uninitialized urandom read (4 bytes read)
  264. [ 13.074075] procd: - init -
  265. [ 13.956216] kmodloader: loading kernel modules from /etc/modules.d/*
  266. [ 14.575007] urngd: v1.0.2 started.
  267. [ 14.586717] videodev: Linux video capture interface: v2.00
  268. [ 14.634927] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
  269. [ 14.642719] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
  270. [ 14.760980] ads7846: probe of spi0.2 failed with error -22
  271. [ 14.913229] mt76_wmac 10300000.wmac: ASIC revision: 76280001
  272. [ 15.034383] random: crng init done
  273. [ 15.037851] random: 23 urandom warning(s) missed due to ratelimiting
  274. [ 15.950868] mt76_wmac 10300000.wmac: Firmware Version: 20151201
  275. [ 15.956897] mt76_wmac 10300000.wmac: Build Time: 20151201183641
  276. [ 15.979019] mt76_wmac 10300000.wmac: firmware init done
  277. [ 16.160048] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  278. [ 16.318560] PPP generic driver version 2.4.2
  279. [ 16.340498] NET: Registered protocol family 24
  280. [ 16.357271] usbcore: registered new interface driver uvcvideo
  281. [ 16.363201] USB Video Class driver (1.1.1)
  282. [ 16.420614] kmodloader: done loading kernel modules from /etc/modules.d/*
  283. [ 43.441994] br-lan: port 1(eth0) entered blocking state
  284. [ 43.447318] br-lan: port 1(eth0) entered disabled state
  285. [ 43.453120] device eth0 entered promiscuous mode
  286. [ 43.486337] br-lan: port 1(eth0) entered blocking state
  287. [ 43.491734] br-lan: port 1(eth0) entered forwarding state
  288. [ 44.499145] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  289. [ 54.845562] br-lan: port 1(eth0) entered disabled state
  290. [ 54.859775] device eth0 left promiscuous mode
  291. [ 54.864290] br-lan: port 1(eth0) entered disabled state
  292. [ 60.403871] br-lan: port 1(eth0) entered blocking state
  293. [ 60.409265] br-lan: port 1(eth0) entered disabled state
  294. [ 60.414942] device eth0 entered promiscuous mode
  295. [ 60.459180] br-lan: port 1(eth0) entered blocking state
  296. [ 60.464505] br-lan: port 1(eth0) entered forwarding state
  297. [ 61.459058] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  298.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!