Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- EFI stub: Booting Linux Kernel...
- EFI stub: Using DTB from configuration table
- EFI stub: Exiting boot services and installing virtual address map...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.12.0-rc<LAVA_DISPATCHER>2017-05-15 09:51:36 AM DEBUG: expect (120): '[u'Freeing unused kernel memory', 'Freeing init memory', '-+\\[ cut here \\]-+\\s+(.*\\s+-+\\[ end trace (\\w*) \\]-+)', '(Unhandled fault.*)\r\n']'
- 1-next-20170515 (buildslave@x86-64-07) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Mon May 15 03:12:43 UTC 2017
- [ 0.000000] Boot CPU: AArch64 Processor [410fd033]
- [ 0.000000] Machine model: HiKey Development Board
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.50 by hikey EFI Feb 15 2017 14:18:06
- [ 0.000000] efi: PROP=0x3d831298
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000078000000, size 128 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] NUMA: Adding memblock [0x0 - 0x5dfffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x5f00000 - 0x5f00fff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x5f02000 - 0x6dfefff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x6e00000 - 0x740efff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x7410000 - 0x21efffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x22000000 - 0x34ffffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x350f0000 - 0x384fffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x38500000 - 0x3879ffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x387a0000 - 0x3d76ffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d770000 - 0x3d7affff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d7b0000 - 0x3d7bffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d7c0000 - 0x3d80ffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d810000 - 0x3dffffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x40000000 - 0x7fffffff] on node 0
- [ 0.000000] NUMA: Initmem setup node 0 [mem 0x00000000-0x7fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x77fb8900-0x77fba57f]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000005dfffff]
- [ 0.000000] node 0: [mem 0x0000000005f00000-0x0000000005f00fff]
- [ 0.000000] node 0: [mem 0x0000000005f02000-0x0000000006dfefff]
- [ 0.000000] node 0: [mem 0x0000000006e00000-0x000000000740efff]
- [ 0.000000] node 0: [mem 0x0000000007410000-0x0000000021efffff]
- [ 0.000000] node 0: [mem 0x0000000022000000-0x0000000034ffffff]
- [ 0.000000] node 0: [mem 0x00000000350f0000-0x00000000384fffff]
- [ 0.000000] node 0: [mem 0x0000000038500000-0x000000003879ffff]
- [ 0.000000] node 0: [mem 0x00000000387a0000-0x000000003d76ffff]
- [ 0.000000] node 0: [mem 0x000000003d770000-0x000000003d7affff]
- [ 0.000000] node 0: [mem 0x000000003d7b0000-0x000000003d7bffff]
- [ 0.000000] node 0: [mem 0x000000003d7c0000-0x000000003d80ffff]
- [ 0.000000] node 0: [mem 0x000000003d810000-0x000000003dffffff]
- [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] percpu: Embedded 26 pages/cpu @ffff800077ee5000 s67272 r8192 d31032 u106496
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507149
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,gpt9)/boot/Image console=tty0 console=ttyAMA3,115200 root=/dev/mmcblk0p9 rootwait rw efi=noruntime backend=ramoops ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 1859284K/2061364K available (10812K kernel code, 1728K rwdata, 4684K rodata, 1280K init, 13175K bss, 71008K reserved, 131072K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008b10000 ( 10816 KB)
- [ 0.000000] .rodata : 0xffff000008b10000 - 0xffff000008fb0000 ( 4736 KB)
- [ 0.000000] .init : 0xffff000008fb0000 - 0xffff0000090f0000 ( 1280 KB)
- [ 0.000000] .data : 0xffff0000090f0000 - 0xffff0000092a0200 ( 1729 KB)
- [ 0.000000] .bss : 0xffff0000092a0200 - 0xffff000009f7e198 ( 13176 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Running RCU self tests
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU lockdep checking is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 1.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns
- [ 0.000004] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns
- [ 0.000150] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
- [ 0.000164] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns
- [ 0.000652] Console: colour dummy device 80x25
- [ 0.005125] console [tty0] enabled
- [ 0.005174] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.005246] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.005288] ... MAX_LOCK_DEPTH: 48
- [ 0.005331] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.005374] ... CLASSHASH_SIZE: 4096
- [ 0.005417] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.005461] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.005505] ... CHAINHASH_SIZE: 32768
- [ 0.005549] memory used by lock dependency info: 8159 kB
- [ 0.005599] per task-struct memory footprint: 1920 bytes
- [ 0.005753] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800)
- [ 0.005850] pid_max: default: 32768 minimum: 301
- [ 0.006043] Security Framework initialized
- [ 0.006983] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.007480] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.007590] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.007667] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.024236] ASID allocator initialised with 65536 entries
- [ 0.041211] EFI runtime services will be disabled.
- [ 0.056384] smp: Bringing up secondary CPUs ...
- [ 0.088852] Detected VIPT I-cache on CPU1
- [ 0.088929] CPU1: Booted secondary processor [410fd033]
- [ 0.120994] Detected VIPT I-cache on CPU2
- [ 0.121040] CPU2: Booted secondary processor [410fd033]
- [ 0.153115] Detected VIPT I-cache on CPU3
- [ 0.153154] CPU3: Booted secondary processor [410fd033]
- [ 0.185376] Detected VIPT I-cache on CPU4
- [ 0.185430] CPU4: Booted secondary processor [410fd033]
- [ 0.217475] Detected VIPT I-cache on CPU5
- [ 0.217506] CPU5: Booted secondary processor [410fd033]
- [ 0.249639] Detected VIPT I-cache on CPU6
- [ 0.249670] CPU6: Booted secondary processor [410fd033]
- [ 0.281835] Detected VIPT I-cache on CPU7
- [ 0.281866] CPU7: Booted secondary processor [410fd033]
- [ 0.282055] smp: Brought up 1 node, 8 CPUs
- [ 0.282738] SMP: Total of 8 processors activated.
- [ 0.282796] CPU features: detected feature: 32-bit EL0 Support
- [ 0.282994] CPU: All CPU(s) started at EL2
- [ 0.283173] alternatives: patching kernel code
- [ 0.285009] devtmpfs: initialized
- [ 0.299980] DMI not present or invalid.
- [ 0.310108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.310332] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.314704] pinctrl core: initialized pinctrl subsystem
- [ 0.318346] NET: Registered protocol family 16
- [ 0.322055] cpuidle: using governor menu
- [ 0.322761] vdso: 2 pages (1 code @ ffff000008b17000, 1 data @ ffff0000090f5000)
- [ 0.322859] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.328119] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.328937] Serial: AMBA PL011 UART driver
- [ 0.333178] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 rev2
- [ 0.334640] uart-pl011 f7111000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart1_pmx_func, deferring probe
- [ 0.335222] uart-pl011 f7112000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart2_pmx_func, deferring probe
- [ 0.335755] uart-pl011 f7113000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart3_pmx_func, deferring probe
- [ 0.348785] hi6220-mbox f7510000.mailbox: Mailbox enabled
- [ 0.373948] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.376486] ACPI: Interpreter disabled.
- [ 0.378724] vgaarb: loaded
- [ 0.379249] SCSI subsystem initialized
- [ 0.379847] ssp-pl022 f7106000.spi: could not find pctldev for node /soc/pinmux@f7010000/spi0_pmx_func, deferring probe
- [ 0.380546] usbcore: registered new interface driver usbfs
- [ 0.380699] usbcore: registered new interface driver hub
- [ 0.380995] usbcore: registered new device driver usb
- [ 0.381403] i2c_designware f7100000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c0_pmx_func, deferring probe
- [ 0.381568] i2c_designware f7101000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c1_pmx_func, deferring probe
- [ 0.381724] i2c_designware f7102000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c2_pmx_func, deferring probe
- [ 0.382633] pps_core: LinuxPPS API ver. 1 registered
- [ 0.382694] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.382833] PTP clock support registered
- [ 0.383158] dmi: Firmware registration failed.
- [ 0.383375] Registered efivars operations
- [ 0.383721] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.385935] clocksource: Switched to clocksource arch_sys_counter
- [ 0.500534] VFS: Disk quotas dquot_6.6.0
- [ 0.500688] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.501467] pnp: PnP ACPI: disabled
- [ 0.518178] NET: Registered protocol family 2
- [ 0.519470] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.520004] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
- [ 0.522956] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.523521] UDP hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.524034] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.524989] NET: Registered protocol family 1
- [ 0.526154] RPC: Registered named UNIX socket transport module.
- [ 0.526228] RPC: Registered udp transport module.
- [ 0.526282] RPC: Registered tcp transport module.
- [ 0.526335] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.528051] kvm [1]: 8-bit VMID
- [ 0.528099] kvm [1]: IDMAP page: afd000
- [ 0.528148] kvm [1]: HYP VA range: 800000000000:ffffffffffff
- [ 0.535060] kvm [1]: Hyp mode initialized successfully
- [ 0.535172] kvm [1]: vgic-v2@f6804000
- [ 0.535538] kvm [1]: vgic interrupt IRQ1
- [ 0.535610] kvm [1]: virtual timer IRQ4
- [ 0.541816] audit: initializing netlink subsys (disabled)
- [ 0.542496] audit: type=2000 audit(0.536:1): state=initialized audit_enabled=0 res=1
- [ 0.543517] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 0.563299] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.565361] NFS: Registering the id_resolver key type
- [ 0.565595] Key type id_resolver registered
- [ 0.565655] Key type id_legacy registered
- [ 0.565719] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.566197] 9p: Installing v9fs 9p2000 file system support
- [ 0.570883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.571089] io scheduler noop registered
- [ 0.571667] io scheduler cfq registered (default)
- [ 0.571725] io scheduler mq-deadline registered
- [ 0.571780] io scheduler kyber registered
- [ 0.576808] test_firmware: interface ready
- [ 0.582007] pinctrl-single f7010000.pinmux: 159 pins at pa ffff00000a2f7000 size 636
- [ 0.583044] pinctrl-single f7010800.pinmux: 163 pins at pa ffff00000a2f9800 size 652
- [ 0.583801] pinctrl-single f8001800.pinmux: 30 pins at pa ffff00000a2fb800 size 120
- [ 0.587915] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered
- [ 0.589151] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered
- [ 0.590446] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered
- [ 0.590805] pl061_gpio f8014000.gpio: names 9 do not match number of GPIOs 8
- [ 0.591848] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered
- [ 0.593027] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered
- [ 0.594364] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered
- [ 0.595571] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered
- [ 0.596730] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered
- [ 0.596973] pl061_gpio f7024000.gpio: names 9 do not match number of GPIOs 8
- [ 0.598006] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered
- [ 0.599236] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered
- [ 0.600420] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered
- [ 0.601584] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered
- [ 0.602821] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered
- [ 0.603990] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered
- [ 0.605168] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered
- [ 0.606413] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered
- [ 0.607631] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered
- [ 0.608806] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered
- [ 0.610041] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered
- [ 0.611226] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered
- [ 0.619838] xenfs: not registering filesystem on non-xen platform
- [ 0.627667] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.631129] SuperH (H)SCI(F) driver initialized
- [ 0.631719] msm_serial: driver initialized
- [ 0.658448] loop: module loaded
- [ 0.666298] hisi_sas: driver version v1.6
- [ 0.670898] libphy: Fixed MDIO Bus: probed
- [ 0.671685] tun: Universal TUN/TAP device driver, 1.6
- [ 0.673472] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 0.673544] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 0.673710] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 0.673783] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 0.673978] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 0.674065] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 0.674643] sky2: driver version 1.30
- [ 0.675570] VFIO - User Level meta-driver version: 0.3
- [ 0.678208] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.678295] ehci-pci: EHCI PCI platform driver
- [ 0.678423] ehci-platform: EHCI generic platform driver
- [ 0.678650] ehci-orion: EHCI orion driver
- [ 0.678838] ehci-exynos: EHCI EXYNOS driver
- [ 0.679021] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 0.679210] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.679311] ohci-pci: OHCI PCI platform driver
- [ 0.679445] ohci-platform: OHCI generic platform driver
- [ 0.679637] ohci-exynos: OHCI EXYNOS driver
- [ 0.680307] usbcore: registered new interface driver usb-storage
- [ 0.683085] input: HISI 65xx PowerOn Key as /devices/platform/f8000000.pmic/hi65xx-powerkey.0.auto/input/input0
- [ 0.685295] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0
- [ 0.686014] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc1
- [ 0.687022] i2c /dev entries driver
- [ 0.693956] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 0
- [ 0.693986] hisi_thermal f7030700.tsensor: failed to register sensor id 0: -19
- [ 0.693994] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19
- [ 0.694021] hisi_thermal f7030700.tsensor: failed to register sensor id 1: -19
- [ 0.694026] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19
- [ 0.705932] hisi_thermal f7030700.tsensor: failed to register sensor id 3: -19
- [ 0.706023] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19
- [ 0.723159] sdhci: Secure Digital Host Controller Interface driver
- [ 0.723238] sdhci: Copyright(c) Pierre Ossman
- [ 0.723665] Synopsys Designware Multimedia Card Interface Driver
- [ 0.724732] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.725057] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode.
- [ 0.725796] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller.
- [ 0.725928] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a
- [ 0.726058] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 40,32 bit host data width,256 deep fifo
- [ 0.726638] mmc_host mmc0: card is non-removable.
- [ 0.745962] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.766269] dwmmc_k3 f723d000.dwmmc0: 1 slots initialized
- [ 0.767029] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.767376] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode.
- [ 0.768499] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller.
- [ 0.768593] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a
- [ 0.768728] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 41,32 bit host data width,128 deep fifo
- [ 0.769242] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO
- [ 0.790079] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.811337] dwmmc_k3 f723e000.dwmmc1: 1 slots initialized
- [ 0.812159] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.812446] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 0.817893] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 0.817985] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 0.818118] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 42,32 bit host data width,128 deep fifo
- [ 0.819632] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.827274] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.828493] usbcore: registered new interface driver usbhid
- [ 0.828596] usbhid: USB HID core driver
- [ 0.834957] NET: Registered protocol family 10
- [ 0.837409] Segment Routing with IPv6
- [ 0.837550] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 0.838718] NET: Registered protocol family 17
- [ 0.838958] 9pnet: Installing 9P2000 support
- [ 0.839153] Key type dns_resolver registered
- [ 0.841403] registered taskstats version 1
- [ 0.849193] mmc_host mmc0: Bus speed (slot 0) = 51756522Hz (slot req 52000000Hz, actual 51756522HZ div = 0)
- [ 0.858399] mmc0: new high speed MMC card at address 0001
- [ 0.860588] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
- [ 0.860921] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2
- [ 0.861304] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
- [ 0.862304] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2
- [ 0.862384] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
- [ 0.863192] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB
- [ 0.863647] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 rev2
- [ 0.986598] mmc_host mmc1: Bus speed (slot 0) = 99200000Hz (slot req 100000000Hz, actual 99200000HZ div = 0)
- [ 0.986632] mmc1: new ultra high speed SDR50 SDHC card at address aaaa
- [ 0.988872] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
- [ 0.993257] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 0.999725] mmcblk1: p1
- [ 2.759861] console [ttyAMA3] enabled
- [ 2.766821] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 2.774054] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to ffff00000a521000
- [ 2.783270] ssp-pl022 f7106000.spi: Failed to work in dma mode, work without dma!
- [ 2.800076] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator
- [ 2.808671] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator
- [ 3.186059] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[1]=128
- [ 3.195512] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[2]=128
- [ 3.204943] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[3]=128
- [ 3.214367] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[4]=128
- [ 3.223790] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[5]=128
- [ 3.233213] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[6]=128
- [ 3.242637] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[7]=0
- [ 3.251884] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[8]=0
- [ 3.261132] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[9]=0
- [ 3.270380] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[10]=0
- [ 3.279716] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[11]=0
- [ 3.289052] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[12]=0
- [ 3.298387] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[13]=0
- [ 3.307722] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[14]=0
- [ 3.317057] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[15]=0
- [ 3.326477] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM
- [ 3.335380] dwc2 f72c0000.usb: DWC OTG Controller
- [ 3.340394] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1
- [ 3.347636] dwc2 f72c0000.usb: irq 38, io mem 0xf72c0000
- [ 3.355915] hub 1-0:1.0: USB hub found
- [ 3.359942] hub 1-0:1.0: 1 port detected
- [ 3.367743] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.378059] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 3.385102] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 3.391554] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 3.397008] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 42,32 bit host data width,128 deep fifo
- [ 3.406751] mmc_host mmc2: card is non-removable.
- [ 3.510249] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 3.538326] dwmmc_k3 f723f000.dwmmc2: 1 slots initialized
- [ 3.545507] rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:00:19 UTC (19)
- [ 3.550903] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range
- [ 3.560999] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0)
- [ 3.564206] random: fast init done
- [ 3.565106] mmc2: new SDIO card at address 0001
- [ 3.585544] LDO2_2V8: disabling
- [ 3.588813] LDO13_1V8: disabling
- [ 3.592127] LDO14_2V8: disabling
- [ 3.595427] LDO17_2V5: disabling
- [ 3.598738] ALSA device list:
- [ 3.601736] No soundcards found.
- [ 3.605991] uart-pl011 f7113000.uart: no DMA platform data
- [ 3.615529] EXT4-fs (mmcblk0p9): couldn't mount as ext3 due to feature incompatibilities
- [ 3.674575] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.682927] VFS: Mounted root (ext4 filesystem) on device 179:9.
- [ 3.694815] devtmpfs: mounted
- [ 3.698834] Freeing unused kernel memory: 1280K
- <LAVA_DISPATCHER>2017-05-15 09:51:39 AM INFO: Starting auto_login
- <LAVA_DISPATCHER>2017-05-15 09:51:39 AM INFO: timeout: 300
- <LAVA_DISPATCHER>2017-05-15 09:51:39 AM DEBUG: expect (150): 'hikey login'
- [ 3.761959] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.767298] usb 1-1: new high-speed USB device number 2 using dwc2
- [ 3.874067] systemd[1]: System time before build time, advancing clock.
- [ 3.943838] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 3.949930] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.968561] systemd[1]: Detected architecture arm64.
- [ 3.972161] hub 1-1:1.0: USB hub found
- [ 3.972301] hub 1-1:1.0: 3 ports detected
- [ 3.981582] systemd[1]: Running with unpopulated /etc.
- Welcome to 1mReference-Platform-Build-X11 2.0+linaro
- [ 4.007141] systemd[1]: Set hostname to <hikey>.
- [ 4.016706] systemd[1]: Initializing machine ID from random generator.
- [ 4.186782] systemd[1]: Failed to populate /etc with preset unit settings, ignoring: Too many levels of symbolic links
- [ 4.261913] dwc2 f72c0000.usb: Set speed to high-speed
- [ 4.267291] usb 1-1.1: new high-speed USB device number 3 using dwc2
- [ 4.349922] dwc2 f72c0000.usb: Set speed to high-speed
- [ 4.431215] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- Started Dispatch Password Requests to Console Directory Watch.
- [ 4.458693] systemd[1]: Listening on Journal Audit Socket.
- Listening on Journal Audit Socket.
- [ 4.478595] systemd[1]: Listening on Network Service Netlink Socket.
- Listening on Network Service Netlink Socket.
- [ 4.498303] systemd[1]: Reached target Remote File Systems.
- Reached target Remote File Systems.
- Listening on udev Kernel Socket.
- Listening on /dev/initctl Compatibility Named Pipe.
- Listening on Syslog Socket.
- Listening on Journal Socket.
- Started Forward Password Requests to Wall Directory Watch.
- Reached target Paths.
- Created slice System Slice.
- Created slice system-getty.slice.
- Mounting Huge Pages File System...
- Starting Create list of required st... nodes for the current kernel...
- Starting Setup Virtual Console...
- Mounting Debug File System...
- Starting Load Kernel Modules...
- Starting Remount[ 4.756548] fuse init (API version 7.26)
- Root and Kernel File Systems...
- [ 4.776818] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- Mounting POSIX Message Queue File System...
- Created slice system-serial\x2dgetty.slice.
- Reached target Swap.
- Mounting Temporary Directory...
- Listening on Journal Socket (/dev/log).
- Starting Journal Service...
- Created slice User and Session Slice.
- Reached target Slices.
- Listening on udev Control Socket.
- Mounted Debug File System.
- Mounted Huge Pages File System.
- Mounted POSIX Message Queue File System.
- Mounted Temporary Directory.
- Started Create list of required sta...ce nodes for the current kernel.
- Started Setup Virtual Console.
- Started Load Kernel Modules.
- Started Remount Root and Kernel File Systems.
- Started Journal Service.
- Starting Rebuild Hardware Database...
- Starting Create System Users...
- Starting Flush Journal to Persistent Storage...
- Mounting FUSE Control File System...
- Mounting Configuration File System...
- Starting Apply Kernel Variables...
- Mounted Configuration File System.
- Mounted FUSE Control File System.
- Started Create System Users.
- Started Apply Kernel Variables.
- Starting Create Static Device Nodes in /dev...
- [ 5.375893] systemd-journald[1378]: Received request to flush runtime journal from PID 1
- Started Create Static Device Nodes in /dev.
- Started Flush Journal to Persistent Storage.
- Starting udev Kernel Device Manager...
- Reached target Local File Systems (Pre).
- Mounting /var/volatile..[ 5.475039] random: crng init done
- .
- Mounted /var/volatile.
- Started udev Kernel Device Manager.
- Starting Load/Save Random Seed...
- Reached target Local File Systems.
- Starting Create Volatile Files and Directories...
- Starting Rebuild Journal Catalog...
- Starting Rebuild Dynamic Linker Cache...
- Started Load/Save Random Seed.
- Started Create Volatile Files and Directories.
- Started Rebuild Journal Catalog.
- Starting Opkg first boot configure...
- Starting Network Time Synchronization...
- Starting Update UTMP about System Boot/Shutdown...
- Started Update UTMP about System Boot/Shutdown.
- Started Network Time Synchronization.
- Reached target System Time Synchronized.
- Started Rebuild Dynamic Linker Cache.
- Started Opkg first boot configure.
- Started Rebuild Hardware Database.
- Starting Update is Completed...
- Starting udev Coldplug all Devices...
- Started Update is Completed.
- Started udev Coldplug all Devices.
- Reached target System Initialization.
- Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- Listening on D-Bus System Message Bus Socket.
- Started Daily Cleanup of Temporary Directories.
- [ 7.305729] adv7511 2-0039: 2-0039 supply avdd not found, using dummy regulator
- [ 7.313681] adv7511 2-0039: 2-0039 supply dvdd not found, using dummy regulator
- [ 7.321582] adv7511 2-0039: 2-0039 supply pvdd not found, using dummy regulator
- [ 7.329484] adv7511 2-0039: 2-0039 supply a2vdd not found, using dummy regulator
- [ 7.338381] adv7511 2-0039: 2-0039 supply v3p3 not found, using dummy regulator
- [ 7.338537] adv7511 2-0039: 2-0039 supply v1p2 not found, using dummy regulator
- Reached target Timers.
- Listening on RPCbind S[ 7.373372] usb 1-1.1: applying rev.C fixup
- erver Activation Socket.
- [ 7.390221] usb 1-1.1: applying rev.C fixup
- Starting sshd.socket.
- [ 7.409580] MOSCHIP usb-ethernet driver 1-1.1:1.0 eth0: register 'MOSCHIP usb-ethernet driver' at usb-f72c0000.usb-1.1, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:3b:07:02:35
- Starting Docker [ 7.429099] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- Socket for the API.
- Listening on sshd.socket.
- Listening on Docker Socket for the API.
- Found device /dev/ttyAMA3.
- [ 7.637922] wl18xx_driver wl18xx.3.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
- [ 7.648943] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
- [ 7.657910] wlcore: WARNING falling back to default config
- Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Reached target Sockets.
- Reached target Basic System.
- Starting Login Service...
- Started System Logging Service.
- Starting Avahi mDNS/DNS-SD Stack...
- Started Periodic Command Scheduler.
- Started TEE Supplicant.
- Started Kernel Logging Service.
- Started Job spooling tools.
- Started D-Bus System Message Bus.
- [ 7.904333] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
- [ 7.937527] wlcore: loaded
- Started Avahi mDNS/DNS-SD Stack.
- Starting Network Manager...
- Starting Network Service...
- Starting Load/Save RF Kill Switch Status...
- Started Login Service.
- Started Load/Save RF Kill Switch Status.
- Started Network Service.
- Started Network Manager.
- Reached target Network.
- Starting Network Name Resolution...
- Starting Permit User Sessions...
- Started Docker Application Container Engine.
- Starting DNS forwarder and DHCP server...
- Started Network Name Resolution.
- [ 8.270147] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 8.279512] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Started Permit User Sessions.
- [ 8.303900] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- Started Serial Getty on ttyAMA3.
- Started Getty on tty1.
- [ 8.442025] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 8.487711] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0)
- [ 8.813657] wlcore: PHY firmware version: Rev 8.2.0.0.236
- [ 8.923314] wlcore: firmware booted (Rev 8.9.0.0.69)
- [ 8.948493] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- Started DNS forwarder and DHCP server.
- [ 8.989773] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- Starting WPA supplicant...
- Starting Authorization Manager...
- Started WPA supplicant.
- [ 9.307209] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- Started Authorization Manager.
- Starting Network Manager Script Dispatcher Service...
- Started Network Manager Script Dispatcher Service.
- [ 10.880265] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 10.897629] Bridge firewalling registered
- [ 10.923773] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 10.989375] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.002701] audit: type=1325 audit(1494841906.735:2): table=filter family=2 entries=0
- [ 11.012214] audit: type=1300 audit(1494841906.735:2): arch=c00000b7 syscall=273 success=yes exit=0 a0=0 a1=419308 a2=0 a3=0 items=0 ppid=103 pid=2510 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/bin/kmod" key=(null)
- [ 11.038276] audit: type=1327 audit(1494841906.735:2): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
- [ 11.063371] audit: type=1325 audit(1494841906.796:3): table=nat family=2 entries=0
- [ 11.071334] audit: type=1300 audit(1494841906.796:3): arch=c00000b7 syscall=273 success=yes exit=0 a0=1 a1=419308 a2=0 a3=1 items=0 ppid=103 pid=2518 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/bin/kmod" key=(null)
- [ 11.097327] audit: type=1327 audit(1494841906.796:3): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174
- [ 11.173738] audit: type=1325 audit(1494841906.906:4): table=nat family=2 entries=5
- [ 11.181497] audit: type=1300 audit(1494841906.906:4): arch=c00000b7 syscall=208 success=yes exit=0 a0=4 a1=0 a2=40 a3=13d0a720 items=0 ppid=2418 pid=2539 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
- [ 11.209063] audit: type=1327 audit(1494841906.906:4): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D74006E6174002D4E00444F434B4552
- [ 11.222610] audit: type=1325 audit(1494841906.924:5): table=filter family=2 entries=4
- [ 11.635070] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
- Reference-Platform-Build-X11 2.0+linaro hikey ttyAMA3
- hikey login<LAVA_DISPATCHER>2017-05-15 09:51:50 AM DEBUG: send (delay_ms=0): root
- <LAVA_DISPATCHER>2017-05-15 09:51:50 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:50 AM DEBUG: expect (150): '[u'\\(initramfs\\)', u'linaro-test', u'/ #', u'root@linaro#', u'root@android', u'root@master', u'root@linaro-nano:~#', u'root@linaro-developer:~#', u'root@linaro-server:~#', u'root@genericarmv7a:~#', u'root@genericarmv8:~#', u'root@linaro-alip:~#', u'root@hikey', u'hikey:~#']'
- : root
- root@hikey:~# <LAVA_DISPATCHER>2017-05-15 09:51:53 AM DEBUG: send (delay_ms=0): export PS1="linaro-test [rc=$(echo \$?)]# "
- <LAVA_DISPATCHER>2017-05-15 09:51:55 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:55 AM DEBUG: expect (5): 'linaro-test \[rc=(\d+)\]# '
- export PS1="linaro-test [rc=$(echo \$?)]# "
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:51:55 AM INFO: Kernel boot time: 2.83 seconds
- <LAVA_DISPATCHER>2017-05-15 09:51:55 AM INFO: Userspace boot time: 16.48 seconds
- <LAVA_DISPATCHER>2017-05-15 09:51:55 AM INFO: System is in test image now, performing basic user space tests.
- <LAVA_DISPATCHER>2017-05-15 09:51:55 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:55 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:55 AM DEBUG: expect (10): '['linaro-test \\[rc=(\\d+)\\]# ', <class 'pexpect.TIMEOUT'>]'
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:51:55 AM DEBUG: executing test command mount
- <LAVA_DISPATCHER>2017-05-15 09:51:56 AM DEBUG: send (delay_ms=0): mount
- <LAVA_DISPATCHER>2017-05-15 09:51:56 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:56 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- mount
- /dev/mmcblk0p9 on / type ext4 (rw,relatime,data=ordered)
- devtmpfs on /dev type devtmpfs (rw,relatime,size=929640k,nr_inodes=232410,mode=755)
- sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
- proc on /proc type proc (rw,relatime)
- tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
- devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
- tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
- tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
- cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
- pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
- cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
- cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
- cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
- cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
- cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
- cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
- cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
- cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
- hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
- debugfs on /sys/kernel/debug type debugfs (rw,relatime)
- mqueue on /dev/mqueue type mqueue (rw,relatime)
- tmpfs on /tmp type tmpfs (rw)
- fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
- configfs on /sys/kernel/config type configfs (rw,relatime)
- tmpfs on /var/volatile type tmpfs (rw,relatime)
- tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=199164k,mode=700)
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:51:56 AM DEBUG: executing test command df
- <LAVA_DISPATCHER>2017-05-15 09:51:56 AM DEBUG: send (delay_ms=0): df
- <LAVA_DISPATCHER>2017-05-15 09:51:56 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:56 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- df
- Filesystem 1K-blocks Used Available Use% Mounted on
- /dev/root 1144416 913368 154864 86% /
- devtmpfs 929640 0 929640 0% /dev
- tmpfs 995816 0 995816 0% /dev/shm
- tmpfs 995816 16824 978992 2% /run
- tmpfs 995816 0 995816 0% /sys/fs/cgroup
- tmpfs 995816 0 995816 0% /tmp
- tmpfs 995816 100 995716 1% /var/volatile
- tmpfs 199164 0 199164 0% /run/user/0
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:51:57 AM DEBUG: executing test command ls /
- <LAVA_DISPATCHER>2017-05-15 09:51:57 AM DEBUG: send (delay_ms=0): ls /
- <LAVA_DISPATCHER>2017-05-15 09:51:57 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:57 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- ls /
- bin dev home lost+found mnt proc sbin sys usr
- boot etc lib media opt run srv tmp var
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:51:57 AM DEBUG: executing test command ip addr
- <LAVA_DISPATCHER>2017-05-15 09:51:57 AM DEBUG: send (delay_ms=0): ip addr
- <LAVA_DISPATCHER>2017-05-15 09:51:58 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:58 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- ip addr
- 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
- link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
- inet 127.0.0.1/8 scope host lo
- valid_lft forever preferred_lft forever
- inet6 ::1/128 scope host
- valid_lft forever preferred_lft forever
- 2: sit0@NONE: <NOARP> mtu 1480 qdisc noop qlen 1000
- link/sit 0.0.0.0 brd 0.0.0.0
- 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
- link/ether 00:13:3b:07:02:35 brd ff:ff:ff:ff:ff:ff
- inet 10.15.83.202/12 brd 10.15.255.255 scope global dynamic eth0
- valid_lft 3092sec preferred_lft 3092sec
- inet6 fe80::213:3bff:fe07:235/64 scope link
- valid_lft forever preferred_lft forever
- 4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1000
- link/ether 78:a5:04:21:11:ed brd ff:ff:ff:ff:ff:ff
- 5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
- link/ether 02:42:4b:1e:9c:35 brd ff:ff:ff:ff:ff:ff
- inet 172.17.0.1/16 scope global docker0
- valid_lft forever preferred_lft forever
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:51:58 AM DEBUG: Checking for vm-group host
- <LAVA_DISPATCHER>2017-05-15 09:51:58 AM DEBUG: Setting up name resolution
- <LAVA_DISPATCHER>2017-05-15 09:51:58 AM DEBUG: send (delay_ms=0): test -e /proc/net/pnp
- <LAVA_DISPATCHER>2017-05-15 09:51:59 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:51:59 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- test -e /proc/net/pnp
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:51:59 AM DEBUG: send (delay_ms=0): test -s /etc/resolv.conf
- <LAVA_DISPATCHER>2017-05-15 09:52:00 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:00 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- test -s /etc/resolv.conf
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:01 AM DEBUG: setting status pass
- <LAVA_DISPATCHER>2017-05-15 09:52:01 AM DEBUG: finally status pass
- <LAVA_DISPATCHER>2017-05-15 09:52:01 AM INFO: [ACTION-E] boot_linaro_image is finished successfully.
- <LAVA_DISPATCHER>2017-05-15 09:52:01 AM INFO: [ACTION-B] lava_test_shell is started with {u'testdef_repos': [{u'git-repo': u'git://git.linaro.org/qa/test-definitions.git', u'testdef': u'automated/linux/libhugetlbfs/libhugetlbfs.yaml'}], u'timeout': 3600}
- <LAVA_DISPATCHER>2017-05-15 09:52:01 AM DEBUG: send (delay_ms=0): mkdir -p /lava-hi6220-hikey-04
- <LAVA_DISPATCHER>2017-05-15 09:52:02 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:02 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- mkdir -p /lava-hi6220-hikey-04
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:02 AM DEBUG: send (delay_ms=0): nice tar -czf /tmp/fs.tgz -C / lava-hi6220-hikey-04
- <LAVA_DISPATCHER>2017-05-15 09:52:05 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:05 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- nice tar -czf /tmp/fs.tgz -C / lava-hi6220-hikey-04
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:05 AM DEBUG: send (delay_ms=0): cd /tmp
- <LAVA_DISPATCHER>2017-05-15 09:52:06 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:06 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- cd /tmp
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:06 AM INFO: Waiting for network to come up
- <LAVA_DISPATCHER>2017-05-15 09:52:06 AM DEBUG: send (delay_ms=0): LC_ALL=C ping -W4 -c1 10.2.4.1
- <LAVA_DISPATCHER>2017-05-15 09:52:07 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:07 AM DEBUG: expect (60): '['1 received|1 packets received', '0 received|0 packets received', 'Network is unreachable']'
- LC_ALL=C ping -W4 -c1 10.2.4.1
- PING 10.2.4.1 (10.2.4.1): 56 data bytes
- 64 bytes from 10.2.4.1: seq=0 ttl=64 time=2.242 ms
- --- 10.2.4.1 ping statistics ---
- 1 packets transmitted, 1 packets received, 0% packe<LAVA_DISPATCHER>2017-05-15 09:52:08 AM DEBUG: expect (29): 'linaro-test \[rc=(\d+)\]# '
- t loss
- round-trip min/avg/max = 2.242/2.242/2.242 ms
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:08 AM DEBUG: send (delay_ms=0): ifconfig `ip route get 10.2.4.1 | sed 's/.*via\ //' | cut -d ' ' -f3` | grep 'inet addr' |awk -F: '{split($2,a," "); print "<" a[1] ">"}'
- <LAVA_DISPATCHER>2017-05-15 09:52:15 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:15 AM DEBUG: expect (300): '['<(\\d?\\d?\\d?\\.\\d?\\d?\\d?\\.\\d?\\d?\\d?\\.\\d?\\d?\\d?)>', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
- ifconfig `ip route get 10.2.4.1 | sed 's/.*via\ //' | cut -d
- ' ' -f3` | grep 'inet addr' |awk -F: '{split($2,a," "); print "<" a[1] ">"}'
- <10.15.83.202>
- <LAVA_DISPATCHER>2017-05-15 09:52:15 AM DEBUG: expect (149): 'linaro-test \[rc=(\d+)\]# '
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:15 AM DEBUG: Target image IP is 10.15.83.202
- <LAVA_DISPATCHER>2017-05-15 09:52:15 AM DEBUG: send (delay_ms=0): python -m SimpleHTTPServer 0 2>/dev/null
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM DEBUG: expect (120): '['Serving HTTP on 0.0.0.0 port (\\d+) \\.\\.', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
- python -m SimpleHTTPServer 0 2>/dev/null
- Serving HTTP on 0.0.0.0 port 36335 ...
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM DEBUG: About to download http://10.15.83.202:36335/fs.tgz to the host
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM INFO: Downloading image: http://10.15.83.202:36335/fs.tgz
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM INFO: md5sum of downloaded content: 12c8917b93b8039d2b1d1f7a902a2118
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM DEBUG: sha256sum of downloaded content: 1acbc3a748c3f42e8a3d611537374294f4d822a50a68390c9afa8ab6964dbb0f
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM DEBUG: Executing on host : '['nice', 'sh', '-c', u'nice tar --selinux -C /var/lib/lava/dispatcher/tmp/tmp2dg38X/1494841937.82 -xzf /var/lib/lava/dispatcher/tmp/tmp2dg38X/fs.tgz']'
- <LAVA_DISPATCHER>2017-05-15 09:52:17 AM DEBUG: Accessing the file system at /var/lib/lava/dispatcher/tmp/tmp2dg38X/1494841937.82/lava-hi6220-hikey-04
- <LAVA_DISPATCHER>2017-05-15 09:52:19 AM DEBUG: loading test definition ...
- <LAVA_DISPATCHER>2017-05-15 09:52:19 AM DEBUG: Get default parameters : {'VERSION': '2.20', 'WORD_SIZE': '64', 'SKIP_INSTALL': 'False'}
- <LAVA_DISPATCHER>2017-05-15 09:52:19 AM INFO: copied all test files
- <LAVA_DISPATCHER>2017-05-15 09:52:19 AM DEBUG: Attempt 1: Executing on host : 'tar --selinux -C /var/lib/lava/dispatcher/tmp/tmp2dg38X/1494841937.82 -czf /var/lib/lava/dispatcher/tmp/tmp2dg38X/fs.tgz .'
- <LAVA_DISPATCHER>2017-05-15 09:52:20 AM DEBUG: sending control character: c
- <LAVA_DISPATCHER>2017-05-15 09:52:20 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:20 AM DEBUG: expect (15): 'linaro-test \[rc=(\d+)\]# '
- ^Clinaro-test [rc=1]# <LAVA_DISPATCHER>2017-05-15 09:52:20 AM DEBUG: send (delay_ms=0): rm -rf /lava-hi6220-hikey-04
- <LAVA_DISPATCHER>2017-05-15 09:52:22 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:22 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- rm -rf /lava-hi6220-hikey-04
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:22 AM DEBUG: send (delay_ms=0): LANG=C wget --help 2>&1 | head -n1
- <LAVA_DISPATCHER>2017-05-15 09:52:24 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:24 AM DEBUG: expect (10): '['GNU Wget', 'BusyBox', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
- LANG=C wget --help 2>&1 | head -n1
- BusyBox v1.24.1<LAVA_DISPATCHER>2017-05-15 09:52:24 AM DEBUG: expect (4): 'linaro-test \[rc=(\d+)\]# '
- (2017-03-24 07:51:48 UTC) multi-call binary.
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:24 AM DEBUG: send (delay_ms=0): LANG=C tar --help 2>&1 | grep selinux
- <LAVA_DISPATCHER>2017-05-15 09:52:26 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:26 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- LANG=C tar --help 2>&1 | grep selinux
- linaro-test [rc=1]# <LAVA_DISPATCHER>2017-05-15 09:52:26 AM INFO: SELinux support disabled in test image. The current image has no selinux support in 'tar'.
- <LAVA_DISPATCHER>2017-05-15 09:52:26 AM DEBUG: send (delay_ms=0): wget --proxy off -O - http://10.2.4.1/tmp/tmp2dg38X/fs.tgz | /bin/gzip -dc | /bin/tar -C / -xmf -
- <LAVA_DISPATCHER>2017-05-15 09:52:31 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:31 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- wget --proxy off -O - http://10.2.4.1/tmp/tmp2dg38X/fs.tgz |
- /bin/gzip -dc | /bin/tar -C / -xmf -
- Connecting to 10.2.4.1 (10.2.4.1:80)
- - 1% | | 228k 0:01:11 ETA
- - 62% |******************* | 10388k 0:00:01 ETA
- - 100% |*******************************| 16525k 0:00:00 ETA
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: sending control character: c
- <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: expect (15): 'linaro-test \[rc=(\d+)\]# '
- ^C
- linaro-test [rc=130]# <LAVA_DISPATCHER>2017-05-15 09:52:33 AM INFO: Booting the test image. Attempt: 1
- <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:33 AM DEBUG: send (delay_ms=0): export PS1="linaro-test [rc=$(echo \$?)]# "
- <LAVA_DISPATCHER>2017-05-15 09:52:35 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:35 AM INFO: System is in test image now, performing basic user space tests.
- <LAVA_DISPATCHER>2017-05-15 09:52:35 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:35 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:35 AM DEBUG: expect (10): '['linaro-test \\[rc=(\\d+)\\]# ', <class 'pexpect.TIMEOUT'>]'
- linaro-test [rc=130]#
- linaro-test [rc=130]# export PS1="linaro-test [rc=$(echo \$?)]# "
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:35 AM DEBUG: executing test command mount
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:36 AM DEBUG: send (delay_ms=0): mount
- <LAVA_DISPATCHER>2017-05-15 09:52:36 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:36 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- mount
- /dev/mmcblk0p9 on / type ext4 (rw,relatime,data=ordered)
- devtmpfs on /dev type devtmpfs (rw,relatime,size=929640k,nr_inodes=232410,mode=755)
- sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
- proc on /proc type proc (rw,relatime)
- tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
- devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
- tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
- tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
- cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
- pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
- cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
- cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
- cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
- cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
- cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
- cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
- cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
- cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
- hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
- debugfs on /sys/kernel/debug type debugfs (rw,relatime)
- mqueue on /dev/mqueue type mqueue (rw,relatime)
- tmpfs on /tmp type tmpfs (rw)
- fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
- configfs on /sys/kernel/config type configfs (rw,relatime)
- tmpfs on /var/volatile type tmpfs (rw,relatime)
- tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=199164k,mode=700)
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:36 AM DEBUG: executing test command df
- <LAVA_DISPATCHER>2017-05-15 09:52:36 AM DEBUG: send (delay_ms=0): df
- <LAVA_DISPATCHER>2017-05-15 09:52:36 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:36 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- df
- Filesystem 1K-blocks Used Available Use% Mounted on
- /dev/root 1144416 941496 126736 89% /
- devtmpfs 929640 0 929640 0% /dev
- tmpfs 995816 0 995816 0% /dev/shm
- tmpfs 995816 16824 978992 2% /run
- tmpfs 995816 0 995816 0% /sys/fs/cgroup
- tmpfs 995816 4 995812 1% /tmp
- tmpfs 995816 100 995716 1% /var/volatile
- tmpfs 199164 0 199164 0% /run/user/0
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:37 AM DEBUG: executing test command ls /
- <LAVA_DISPATCHER>2017-05-15 09:52:37 AM DEBUG: send (delay_ms=0): ls /
- <LAVA_DISPATCHER>2017-05-15 09:52:37 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:37 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- ls /
- bin dev home lib media opt run srv tmp var
- boot etc lava-hi6220-hikey-04 lost+found mnt proc sbin sys usr
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:37 AM DEBUG: executing test command ip addr
- <LAVA_DISPATCHER>2017-05-15 09:52:37 AM DEBUG: send (delay_ms=0): ip addr
- <LAVA_DISPATCHER>2017-05-15 09:52:37 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:38 AM DEBUG: expect (2): 'linaro-test \[rc=(\d+)\]# '
- ip addr
- 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
- link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
- inet 127.0.0.1/8 scope host lo
- valid_lft forever preferred_lft forever
- inet6 ::1/128 scope host
- valid_lft forever preferred_lft forever
- 2: sit0@NONE: <NOARP> mtu 1480 qdisc noop qlen 1000
- link/sit 0.0.0.0 brd 0.0.0.0
- 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
- link/ether 00:13:3b:07:02:35 brd ff:ff:ff:ff:ff:ff
- inet 10.15.83.202/12 brd 10.15.255.255 scope global dynamic eth0
- valid_lft 3052sec preferred_lft 3052sec
- inet6 fe80::213:3bff:fe07:235/64 scope link
- valid_lft forever preferred_lft forever
- 4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1000
- link/ether 78:a5:04:21:11:ed brd ff:ff:ff:ff:ff:ff
- 5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
- link/ether 02:42:4b:1e:9c:35 brd ff:ff:ff:ff:ff:ff
- inet 172.17.0.1/16 scope global docker0
- valid_lft forever preferred_lft forever
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:38 AM DEBUG: Checking for vm-group host
- <LAVA_DISPATCHER>2017-05-15 09:52:38 AM DEBUG: Setting up name resolution
- <LAVA_DISPATCHER>2017-05-15 09:52:38 AM DEBUG: send (delay_ms=0): test -e /proc/net/pnp
- <LAVA_DISPATCHER>2017-05-15 09:52:39 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:39 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- test -e /proc/net/pnp
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:39 AM DEBUG: send (delay_ms=0): test -s /etc/resolv.conf
- <LAVA_DISPATCHER>2017-05-15 09:52:40 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:40 AM DEBUG: expect (60): 'linaro-test \[rc=(\d+)\]# '
- test -s /etc/resolv.conf
- linaro-test [rc=0]# <LAVA_DISPATCHER>2017-05-15 09:52:41 AM DEBUG: send (delay_ms=0): /lava-hi6220-hikey-04/bin/lava-test-runner /lava-hi6220-hikey-04
- <LAVA_DISPATCHER>2017-05-15 09:52:44 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:44 AM DEBUG: expect (3600): '['<LAVA_TEST_RUNNER>: exiting', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>, '<LAVA_SIGNAL_(\\S+) ([^>]+)>', '<LAVA_MULTI_NODE> <LAVA_(\\S+) ([^>]+)>', '<LAVA_LMP> <LAVA_(\\S+) ([^>]+)>', <class 'pexpect.TIMEOUT'>]'
- /lava-hi6220-hikey-04/bin/lava-test-runner /lava-hi6220-hike
- y-04
- /lava-hi6220-hikey-04
- <LAVA_TEST_RUNNER>: started
- <LAVA_TEST_RUNNER>: looking for work in /lava-hi6220-hikey-04/lava-test-runner.conf-1494841964
- <LAVA_TEST_RUNNER>: running 0_f6991a19-9077-450b-8d98-e7bab0371ea5 under lava-test-shell...
- <LAVA_TEST_RUNNER>: save hardware/software context info for 0_f6991a19-9077-450b-8d98-e7bab0371ea5...
- /lava-hi6220-hikey-04/bin/lava-installed-packages: line 5: dpkg-query: command not found
- <LAVA_SIGNAL_STARTRUN libhugetlbfs f6991a19-9077-450b-8d98-e7bab0371ea5>
- <LAVA_DISPATCHER>2017-05-15 09:52:44 AM DEBUG: Received signal <STARTRUN>
- <LAVA_DISPATCHER>2017-05-15 09:52:44 AM DEBUG: send (delay_ms=0): echo LAVA_ACK
- <LAVA_DISPATCHER>2017-05-15 09:52:45 AM DEBUG: send (delay_ms=0):
- <LAVA_DISPATCHER>2017-05-15 09:52:45 AM WARNING: Using a default pattern to parse the test result. This may lead to empty test results in certain cases.
- <LAVA_DISPATCHER>2017-05-15 09:52:45 AM DEBUG: expect (3599): '['<LAVA_TEST_RUNNER>: exiting', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>, '<LAVA_SIGNAL_(\\S+) ([^>]+)>', '<LAVA_MULTI_NODE> <LAVA_(\\S+) ([^>]+)>', '<LAVA_LMP> <LAVA_(\\S+) ([^>]+)>', <_sre.SRE_Pattern object at 0x24eba80>]'
- echo LAVA_ACK
- INFO: About to run libhugetlbfs test...
- INFO: Output directory: /lava-hi6220-hikey-04/tests/0_f6991a19-9077-450b-8d98-e7bab0371ea5/automated/linux/libhugetlbfs/output
- libhugetlb-pre-requirements pass
- pre built /usr/lib/libhugetlbfs found on rootfs
- zero_filesize_segment (2M: 64): PASS
- test_root (2M: 64): PASS
- meminfo_nohuge (2M: 64): PASS
- gethugepagesize (2M: 64): PASS
- gethugepagesizes (2M: 64): PASS
- HUGETLB_VERBOSE=1 empty_mounts (2M: 64): PASS
- HUGETLB_VERBOSE=1 large_mounts (2M: 64): PASS
- find_path (2M: 64): PASS
- unlinked_fd (2M: 64): PASS
- readback (2M: 64): PASS
- truncate (2M: 64): PASS
- shared (2M: 64): PASS
- mprotect (2M: 64): PASS
- mlock (2M: 64): PASS
- misalign (2M: 64): PASS
- ptrace-write-hugepage (2M: 64): PASS
- icache-hygiene (2M: 64): PASS
- slbpacaflush (2M: 64): PASS (inconclusive)
- straddle_4GB_static (2M: 64): PASS
- huge_at_4GB_normal_below_static (2M: 64): PASS
- huge_below_4GB_normal_above_static (2M: 64): PASS
- map_high_truncate_2 (2M: 64): PASS
- misaligned_offset (2M: 64): PASS (inconclusive)
- truncate_above_4GB (2M: 64): PASS
- [ 70.747190] kauditd_printk_skb: 36 callbacks suppressed
- brk_near_huge (2M[ 70.753217] audit: type=1701 audit(1494841966.480:18): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2742 comm="brk_near_huge" exe="/usr/lib/libhugetlbfs/tests/obj64/brk_near_huge" sig=6 res=1
- : 64): brk_near_huge: malloc.c:2403: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)' failed.
- task-size-overrun (2M: 64): PASS
- [ 73.269227] stack_grow_into[2746]: unhandled level 2 translation fault (11) at 0xffffc9fc7b10, esr 0x92000046
- [ 73.279344] pgd = ffff80006fec3000
- [ 73.282844] [ffffc9fc7b10] *pgd=0000000067599003, *pud=000000006602e003, *pmd=0000000000000000
- [ 73.291627] CPU: 1 PID: 2746 Comm: stack_grow_into Not tainted 4.12.0-rc1-next-20170515 #1
- [ 73.300053] Hardware name: HiKey Development Board (DT)
- [ 73.305400] task: ffff80006612c200 task.stack: ffff8000661c4000
- [ 73.311452] PC is at 0x4017c4
- [ 73.314506] LR is at 0x4017ac
- [ 73.317577] pc : [<00000000004017c4>] lr : [<00000000004017ac>] pstate: 80000000
- [ 73.325110] sp : 0000ffffc9fc7b10
- [ 73.328526] x29: 0000ffffd9fc7b20 x28: 0000000000000000
- [ 73.333977] x27: 0000000000000000 x26: 0000000000000000
- [ 73.339418] x25: 0000000000000000 x24: 0000000000000000
- [ 73.344868] x23: 000000002f92c000 x22: ffffffffffe00000
- [ 73.350331] x21: 0000000000000003 x20: 0000ffffd9a00000
- [ 73.355787] x19: 0000000000000001 x18: 0000400000469000
- [ 73.361235] x17: 0000000000412d30 x16: 000040000055e410
- [ 73.366695] x15: 0000000000000578 x14: 0000000000001030
- [ 73.372140] x13: 0000000000000000 x12: 000000000000006a
- [ 73.377595] x11: 000000000000001c x10: 0101010101010101
- [ 73.383042] x9 : 0000000000000024 x8 : 00000000000000a4
- [ 73.388494] x7 : 0000000000008cd6 x6 : 0000000000000ab9
- [ 73.393943] x5 : 0000000000000ab9 x4 : 0000400000409970
- [ 73.399404] x3 : 0000000000000001 x2 : ffffffffeffffff0
- [ 73.404845] x1 : 0000000000000001 x0 : 0000ffffc9fc7b10
- [ 73.410492] Process 2746(stack_grow_into) has RLIMIT_CORE set to 1
- [ 73.410820] audit: type=1701 audit(1494841969.144:19): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2746 comm="stack_grow_into" exe="/usr/lib/libhugetlbfs/tests/obj64/stack_grow_into_huge" sig=11 res=1
- [ 73.435209] Aborting core
- stack_grow_into_huge (2M: 64): PASS
- corrupt-by-cow-opt (2M: 64): PASS
- noresv-preserve-resv-page (2M: 64): PASS
- noresv-regarded-as-resv (2M: 64): PASS
- readahead_reserve.sh (2M: 64): PASS
- madvise_reserve.sh (2M: 64): PASS
- fadvise_reserve.sh (2M: 64): PASS
- mremap-expand-slice-collision.sh (2M: 64): PASS
- mremap-fixed-normal-near-huge.sh (2M: 64): PASS
- mremap-fixed-huge-near-normal.sh (2M: 64): PASS
- set shmmax limit to 67108864
- shm-perms (2M: 64): PASS
- private (2M: 64): PASS
- fork-cow (2M: 64): PASS
- direct (2M: 64): Bad configuration: Failed to open direct-IO file: Invalid argument
- malloc (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so HUGETLB_MORECORE=yes malloc (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so HUGETLB_RESTRICT_EXE=unknown:none HUGETLB_MORECORE=yes malloc (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so HUGETLB_RESTRICT_EXE=unknown:malloc HUGETLB_MORECORE=yes malloc (2M: 64): PASS
- malloc_manysmall (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so HUGETLB_MORECORE=yes malloc_manysmall (2M: 64): PASS
- heapshrink (2M: 64): PASS
- LD_PRELOAD=libheapshrink.so heapshrink (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so HUGETLB_MORECORE=yes heapshrink (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so libheapshrink.so HUGETLB_MORECORE=yes heapshrink (2M: 64): PASS
- LD_PRELOAD=libheapshrink.so HUGETLB_MORECORE_SHRINK=yes HUGETLB_MORECORE=yes heapshrink (2M: 64): PASS (inconclusive)
- LD_PRELOAD=libhugetlbfs.so libheapshrink.so HUGETLB_MORECORE_SHRINK=yes HUGETLB_MORECORE=yes heapshrink (2M: 64): PASS
- HUGETLB_VERBOSE=1 HUGETLB_MORECORE=yes heap-overflow (2M: 64): PASS
- HUGETLB_VERBOSE=0 linkhuge_nofd (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so HUGETLB_VERBOSE=0 linkhuge_nofd (2M: 64): PASS
- linkhuge (2M: 64): PASS
- LD_PRELOAD=libhugetlbfs.so linkhuge (2M: 64): PASS
- [ 77.485270] linkhuge_rw[2809]: unhandled level 3 translation fault (11) at 0x004121c0, esr 0x92000047
- [ 77.494677] pgd = ffff800073a42000
- [ 77.498182] [004121c0] *pgd=00000000660ef003, *pud=000000004ae67003, *pmd=0000000066023003, *pte=0000000000000000
- [ 77.508627] CPU: 7 PID: 2809 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 77.516676] Hardware name: HiKey Development Board (DT)
- [ 77.522000] task: ffff80004ae39600 task.stack: ffff8000660b0000
- [ 77.528033] PC is at 0x40163c
- [ 77.531080] LR is at 0x401310
- [ 77.534127] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 77.541642] sp : 0000ffffe7d4d950
- [ 77.544991] x29: 0000ffffe7d4d950 x28: 0000000000612ac0
- [ 77.550410] x27: 00000000deadbeef x26: 00000000004121c0
- [ 77.555838] x25: 0000000000612000 x24: 0000000000000000
- [ 77.561258] x23: 0000000000000000 x22: 0000000000000001
- [ 77.566686] x21: 0000000000622000 x20: 0000000000612b40
- [ 77.572105] x19: 0000000000612a40 x18: 0000ffff9e214000
- [ 77.577527] x17: 0000ffff9e152570 x16: 0000ffff9e259090
- [ 77.582949] x15: 0000ffff9e124ea4 x14: 0000ffffe7d4c7b0
- [ 77.588371] x13: 696c2f7273752f20 x12: 0000000000000000
- [ 77.593788] x11: 0000000400400400 x10: a800000000000000
- [ 77.599210] x9 : 0fffffffffffffff x8 : 0000000000000063
- [ 77.604631] x7 : 0000000400400400 x6 : 0000000000000af4
- [ 77.610048] x5 : 0000000000000af4 x4 : 0000ffff9e2808e0
- [ 77.615470] x3 : 0000000000000001 x2 : 0000ffff9e259000
- [ 77.620892] x1 : 00000000004121c0 x0 : 0000000000000000
- [ 77.626628] audit: type=1701 audit(1494841973.360:20): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2809 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 77.631474] linkhuge_rw[2811]: unhandled level 3 permission fault (11) at 0x004021c0, esr 0x9200004f
- linkhuge_rw (2M: [ 77.631481] pgd = ffff800066100000
- 64): PASS
- [ 77.631485] [004021c0] *pgd=00000000674ff003, *pud=000000006ff7e003, *pmd=000000006745e003, *pte=002000004a47efd3
- [ 77.631505] CPU: 5 PID: 2811 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 77.631509] Hardware name: HiKey Development Board (DT)
- [ 77.631514] task: ffff80004ae3d800 task.stack: ffff8000660b0000
- [ 77.631522] PC is at 0x40163c
- [ 77.631528] LR is at 0x401310
- [ 77.631533] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 77.631537] sp : 0000ffffe7d4d950
- [ 77.631541] x29: 0000ffffe7d4d950 x28: 0000000000612ae0
- [ 77.631550] x27: 00000000deadbeef x26: 00000000004021c0
- HUGETLB_ELFMAP=R [ 77.631559] x25: 0000000000612000 x24: 0000000000000000
- linkhuge_rw (2M: [ 77.631568] x23: 0000000000000000 x22: 0000000000000001
- 64): PASS
- [ 77.631577] x21: 0000000000622000 x20: 0000000000612b40
- [ 77.631586] x19: 0000000000612a40 x18: 0000ffff9e214000
- [ 77.631594] x17: 0000ffff9e152570 x16: 0000ffff9e259090
- [ 77.631603] x15: 0000ffff9e124ea4 x14: 0000ffffe7d4c7b0
- [ 77.631612] x13: 696c2f7273752f20 x12: 0000000000000000
- [ 77.631620] x11: 0000000400400400 x10: a800000000000000
- [ 77.631629] x9 : 0fffffffffffffff x8 : 0000000000000063
- [ 77.631637] x7 : 0000000400400400 x6 : 0000000000000af4
- [ 77.631646] x5 : 0000000000000af4 x4 : 0000ffff9e2808e0
- [ 77.631655] x3 : 0000000000000001 x2 : 0000ffff9e259000
- [ 77.631664] x1 : 00000000004021c0 x0 : 0000000000000000
- HUGETLB_ELFMAP=W [ 77.636561] linkhuge_rw[2813]: unhandled level 3 permission fault (11) at 0x00401850, esr 0x9200004f
- linkhuge_rw (2M:[ 77.636570] pgd = ffff800066020000
- 64): PASS
- [ 77.636574] [00401850] *pgd=000000006757e003, *pud=00000000660e3003, *pmd=0000000073a42003, *pte=002000004aac8fd3
- [ 77.636595] CPU: 7 PID: 2813 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 77.636599] Hardware name: HiKey Development Board (DT)
- [ 77.636603] task: ffff80004ae3c200 task.stack: ffff8000660b0000
- [ 77.636612] PC is at 0x40163c
- [ 77.636616] LR is at 0x401310
- [ 77.636621] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 77.636624] sp : 0000ffffe7d4d950
- [ 77.636628] x29: 0000ffffe7d4d950 x28: 0000000000612b00
- HUGETLB_ELFMAP=RW[ 77.636637] x27: 00000000deadbeef x26: 0000000000401850
- linkhuge_rw (2M[ 77.636645] x25: 0000000000612000 x24: 0000000000000000
- : 64): PASS
- [ 77.636654] x23: 0000000000000000 x22: 0000000000000001
- [ 77.636662] x21: 0000000000622000 x20: 0000000000612b40
- [ 77.636671] x19: 0000000000612a40 x18: 0000ffff9e214000
- [ 77.636680] x17: 0000ffff9e152570 x16: 0000ffff9e259090
- [ 77.636689] x15: 0000ffff9e124ea4 x14: 0000ffffe7d4c7b0
- [ 77.636698] x13: 696c2f7273752f20 x12: 0000000000000000
- [ 77.636707] x11: 0000000400400400 x10: a800000000000000
- HUGETLB_ELFMAP=no[ 77.636716] x9 : 0fffffffffffffff x8 : 0000000000000063
- linkhuge_rw (2M[ 77.636725] x7 : 0000000400400400 x6 : 0000000000000af4
- : 64): PASS
- [ 77.636734] x5 : 0000000000000af4 x4 : 0000ffff9e2808e0
- [ 77.636743] x3 : 0000000000000001 x2 : 0000ffff9e259000
- [ 77.636752] x1 : 0000000000401850 x0 : 0000000000000000
- [ 77.641602] linkhuge_rw[2815]: unhandled level 3 permission fault (11) at 0x00401788, esr 0x9200004f
- [ 77.641610] pgd = ffff80006fef4000
- [ 77.641614] [00401788] *pgd=0000000066044003, *pud=0000000073ac7003, *pmd=0000000066100003, *pte=002000004aac8fd3
- [ 77.641633] CPU: 5 PID: 2815 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- HUGETLB_ELFMAP= H[ 77.641638] Hardware name: HiKey Development Board (DT)
- UGETLB_MINIMAL_C[ 77.641642] task: ffff80004ae3ac00 task.stack: ffff8000660b0000
- OPY=no linkhuge_[ 77.641651] PC is at 0x40163c
- rw (2M: 64): PAS[ 77.641655] LR is at 0x401310
- S
- [ 77.641660] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 77.641663] sp : 0000ffffe7d4d950
- [ 77.641667] x29: 0000ffffe7d4d950 x28: 0000000000612b20
- [ 77.641676] x27: 00000000deadbeef x26: 0000000000401788
- [ 77.641685] x25: 0000000000612000 x24: 0000000000000000
- [ 77.641693] x23: 0000000000000000 x22: 0000000000000001
- HUGETLB_ELFMAP=W [ 77.641702] x21: 0000000000622000 x20: 0000000000612b40
- HUGETLB_MINIMAL_[ 77.641711] x19: 0000000000612a40 x18: 0000ffff9e214000
- COPY=no linkhuge[ 77.641720] x17: 0000ffff9e152570 x16: 0000ffff9e259090
- _rw (2M: 64): PA[ 77.641728] x15: 0000ffff9e124ea4 x14: 0000ffffe7d4c7b0
- SS
- [ 77.641737] x13: 696c2f7273752f20 x12: 0000000000000000
- [ 77.641745] x11: 0000000400400400 x10: a800000000000000
- [ 77.641754] x9 : 0fffffffffffffff x8 : 0000000000000063
- [ 77.641763] x7 : 0000000400400400 x6 : 0000000000000af4
- HUGETLB_ELFMAP=RW[ 77.641772] x5 : 0000000000000af4 x4 : 0000ffff9e2808e0
- HUGETLB_MINIMAL[ 77.641781] x3 : 0000000000000001 x2 : 0000ffff9e259000
- _COPY=no linkhug[ 77.641790] x1 : 0000000000401788 x0 : 0000000000000000
- e_rw (2M: 64): P[ 77.687867] linkhuge_rw[2823]: unhandled level 2 permission fault (11) at 0x004121c0, esr 0x9200004e
- ASS
- [ 77.687876] pgd = ffff8000674c0000
- [ 77.687881] [004121c0] *pgd=00000000674c1003, *pud=000000006ff7c003, *pmd=002000004d000fd1
- HUGETLB_SHARE=0 H[ 77.687898] CPU: 5 PID: 2823 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- UGETLB_ELFMAP=R [ 77.687903] Hardware name: HiKey Development Board (DT)
- linkhuge_rw (2M:[ 77.687908] task: ffff80004ae14200 task.stack: ffff8000660b0000
- 64): PASS
- [ 77.687917] PC is at 0x40163c
- [ 77.687922] LR is at 0x401310
- [ 77.687927] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- HUGETLB_SHARE=1 H[ 77.687930] sp : 0000fffff3df5d90
- UGETLB_ELFMAP=R l[ 77.687935] x29: 0000fffff3df5d90 x28: 0000000000612ac0
- inkhuge_rw (2M: [ 77.687943] x27: 00000000deadbeef x26: 00000000004121c0
- 64): PASS
- [ 77.687952] x25: 0000000000612000 x24: 0000000000000001
- [ 77.687961] x23: 0000000000000000 x22: 0000000000000001
- [ 77.687970] x21: 0000000000622000 x20: 0000000000612b40
- [ 77.687978] x19: 0000000000612a40 x18: 0000ffff9d8f2000
- [ 77.687987] x17: 0000ffff9d830570 x16: 0000ffff9d937090
- HUGETLB_SHARE=0 H[ 77.687996] x15: 0000ffff9d802ea4 x14: 0000fffff3df4bf0
- UGETLB_ELFMAP=W l[ 77.688004] x13: 696c2f7273752f20 x12: 0000000000000000
- inkhuge_rw (2M: [ 77.688013] x11: 0000000400400400 x10: 0800000000000000
- 64): PASS
- [ 77.688022] x9 : 0fffffffffffffff x8 : 0000000000000063
- [ 77.688031] x7 : 0000000400400400 x6 : 0000000000000b01
- [ 77.688040] x5 : 0000000000000b01 x4 : 0000ffff9d95e8e0
- [ 77.688049] x3 : 0000000000000001 x2 : 0000ffff9d937000
- [ 77.688058] x1 : 00000000004121c0 x0 : 0000000000000000
- HUGETLB_SHARE=1 H[ 77.692762] linkhuge_rw[2825]: unhandled level 2 permission fault (11) at 0x004021c0, esr 0x9200004e
- UGETLB_ELFMAP=W l[ 77.692770] pgd = ffff800067603000
- inkhuge_rw (2M: [ 77.692774] [004021c0] *pgd=000000006747d003, *pud=000000006fe05003, *pmd=002000004d000fd1
- 64): PASS
- [ 77.692792] CPU: 0 PID: 2825 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 77.692796] Hardware name: HiKey Development Board (DT)
- [ 77.692801] task: ffff80004ae40000 task.stack: ffff8000660b0000
- HUGETLB_SHARE=0 H[ 77.692810] PC is at 0x40163c
- UGETLB_ELFMAP=RW[ 77.692815] LR is at 0x401310
- linkhuge_rw (2M[ 77.692820] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- : 64): PASS
- [ 77.692824] sp : 0000fffff3df5d90
- [ 77.692838] x29: 0000fffff3df5d90 x28: 0000000000612ae0
- [ 77.692847] x27: 00000000deadbeef x26: 00000000004021c0
- [ 77.692856] x25: 0000000000612000 x24: 0000000000000001
- [ 77.692865] x23: 0000000000000000 x22: 0000000000000001
- [ 77.692873] x21: 0000000000622000 x20: 0000000000612b40
- [ 77.692882] x19: 0000000000612a40 x18: 0000ffff9d8f2000
- HUGETLB_SHARE=1 H[ 77.692891] x17: 0000ffff9d830570 x16: 0000ffff9d937090
- UGETLB_ELFMAP=RW [ 77.692899] x15: 0000ffff9d802ea4 x14: 0000fffff3df4bf0
- linkhuge_rw (2M:[ 77.692908] x13: 75682f7665642f20 x12: 0000000000000000
- 64): PASS
- [ 77.692917] x11: 0000000000000000 x10: 0800200000000000
- chunk-overcommit [ 77.692925] x9 : 00003fffffffffff x8 : 0000000000000063
- (2M: 64): PASS
- [ 77.692934] x7 : 1000010100000000 x6 : 0000000000000b01
- [ 77.692943] x5 : 0000000000000b01 x4 : 0000ffff9d95e8e0
- [ 77.692952] x3 : 0000000000000001 x2 : 0000ffff9d937000
- [ 77.692970] x1 : 00000000004021c0 x0 : 0000000000000000
- [ 77.697751] linkhuge_rw[2827]: unhandled level 2 permission fault (11) at 0x00401850, esr 0x9200004e
- [ 77.697760] pgd = ffff8000757c0000
- [ 77.697764] [00401850] *pgd=0000000073a42003, *pud=000000006614d003, *pmd=002000004d000fd1
- [ 77.697782] CPU: 7 PID: 2827 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 77.697786] Hardware name: HiKey Development Board (DT)
- [ 77.697790] task: ffff80004ae41600 task.stack: ffff8000660b0000
- [ 77.697799] PC is at 0x40163c
- [ 77.697803] LR is at 0x401310
- [ 77.697808] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 77.697811] sp : 0000fffff3df5d90
- [ 77.697815] x29: 0000fffff3df5d90 x28: 0000000000612b00
- alloc-instantiate[ 77.697824] x27: 00000000deadbeef x26: 0000000000401850
- -race shared (2M[ 77.697833] x25: 0000000000612000 x24: 0000000000000001
- : 64): [ 77.697842] x23: 0000000000000000 x22: 0000000000000001
- PASS[ 77.697851] x21: 0000000000622000 x20: 0000000000612b40
- [ 77.697860] x19: 0000000000612a40 x18: 0000ffff9d8f2000
- [ 77.697870] x17: 0000ffff9d830570 x16: 0000ffff9d937090
- [ 77.697878] x15: 0000ffff9d802ea4 x14: 0000fffff3df4bf0
- [ 77.697887] x13: 75682f7665642f20 x12: 0000000000000000
- [ 77.697896] x11: 0000000000000000 x10: 0800200000000000
- [ 77.697904] x9 : 00003fffffffffff x8 : 0000000000000063
- [ 77.697913] x7 : 1000010100000000 x6 : 0000000000000b01
- [ 77.697921] x5 : 0000000000000b01 x4 : 0000ffff9d95e8e0
- [ 77.697930] x3 : 0000000000000001 x2 : 0000ffff9d937000
- [ 77.697938] x1 : 0000000000401850 x0 : 0000000000000000
- [ 77.702700] linkhuge_rw[2829]: unhandled level 2 permission fault (11) at 0x00401788, esr 0x9200004e
- alloc-instantiate[ 77.702709] pgd = ffff80006fd97000
- -race private (2[ 77.702713] [00401788] *pgd=0000000066066003, *pud=0000000066067003, *pmd=002000004d000fd1
- : 64): PASS
- [ 77.702730] CPU: 7 PID: 2829 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- truncate_reserve_[ 77.702734] Hardware name: HiKey Development Board (DT)
- wraparound (2M: 6[ 77.702739] task: ffff80004ae42c00 task.stack: ffff8000660b0000
- 4): PASS[ 77.702748] PC is at 0x40163c
- [ 77.702753] LR is at 0x401310
- [ 77.702757] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 77.702760] sp : 0000fffff3df5d90
- [ 77.702764] x29: 0000fffff3df5d90 x28: 0000000000612b20
- [ 77.702773] x27: 00000000deadbeef x26: 0000000000401788
- [ 77.702782] x25: 0000000000612000 x24: 0000000000000001
- [ 77.702790] x23: 0000000000000000 x22: 0000000000000001
- [ 77.702799] x21: 0000000000622000 x20: 0000000000612b40
- [ 77.702808] x19: 0000000000612a40 x18: 0000ffff9d8f2000
- [ 77.702818] x17: 0000ffff9d830570 x16: 0000ffff9d937090
- [ 77.702827] x15: 0000ffff9d802ea4 x14: 0000fffff3df4bf0
- [ 77.702836] x13: 75682f7665642f20 x12: 0000000000000000
- [ 77.702845] x11: 0000000000000000 x10: 0800200000000000
- [ 77.702854] x9 : 00003fffffffffff x8 : 0000000000000063
- [ 77.702863] x7 : 1000010100000000 x6 : 0000000000000b01
- truncate_sigbus_v[ 77.702871] x5 : 0000000000000b01 x4 : 0000ffff9d95e8e0
- ersus_oom (2M: 64[ 77.702880] x3 : 0000000000000001 x2 : 0000ffff9d937000
- ): PASS
- [ 77.702888] x1 : 0000000000401788 x0 : 0000000000000000
- [ 77.757746] linkhuge_rw[2837]: unhandled level 3 translation fault (11) at 0x004121c0, esr 0x92000047
- get_huge_pages (2[ 77.757754] pgd = ffff80007038a000
- : 64): PASS
- [ 77.757759] [004121c0] *pgd=000000007038b003, *pud=000000006758e003, *pmd=000000006fd97003, *pte=0000000000000000
- [ 77.757779] CPU: 7 PID: 2837 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- shmoverride_linke[ 77.757783] Hardware name: HiKey Development Board (DT)
- d (2M: 64): PASS
- [ 77.757787] task: ffff80004ae38000 task.stack: ffff8000660b0000
- [ 77.757796] PC is at 0x40163c
- [ 77.757800] LR is at 0x401310
- [ 77.757805] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 77.757808] sp : 0000ffffd8d0da90
- [ 77.757812] x29: 0000ffffd8d0da90 x28: 0000000000612ac0
- [ 77.757821] x27: 00000000deadbeef x26: 00000000004121c0
- HUGETLB_SHM=yes s[ 77.757830] x25: 0000000000612000 x24: 0000000000000000
- hmoverride_linked[ 77.757838] x23: 0000000000000001 x22: 0000000000000001
- (2M: 64): PASS
- [ 77.757847] x21: 0000000000622000 x20: 0000000000612b40
- shmoverride_link[ 77.757855] x19: 0000000000612a40 x18: 0000ffff8c84c000
- ed_static (2M: 6[ 77.757864] x17: 0000ffff8c78a570 x16: 0000ffff8c891090
- 4):
- HUGETLB_SHM=[ 77.757873] x15: 0000ffff8c75cea4 x14: 0000ffffd8d0c8f0
- yes shmoverride_[ 77.757882] x13: 75682f7665642f20 x12: 0000000000000000
- linked_static (2[ 77.757891] x11: 0000000000000000 x10: 0800200000000000
- : 64):
- [ 77.757900] x9 : 00003fffffffffff x8 : 0000000000000063
- LD_PRELOAD=libhug[ 77.757909] x7 : 1000010100000000 x6 : 0000000000000b0f
- etlbfs.so shmove[ 77.757918] x5 : 0000000000000b0f x4 : 0000ffff8c8b88e0
- rride_unlinked ([ 77.757927] x3 : 0000000000000001 x2 : 0000ffff8c891000
- 2M: 64): PASS
- [ 77.757936] x1 : 00000000004121c0 x0 : 0000000000000000
- [ 77.999959]
- [ 77.999964] ======================================================
- [ 77.999966] WARNING: possible circular locking dependency detected
- [ 77.999972] 4.12.0-rc1-next-20170515 #1 Not tainted
- LD_PRELOAD=libhug[ 77.999974] ------------------------------------------------------
- etlbfs.so HUGETLB[ 77.999977] irq/56-wl18xx/2376 is trying to acquire lock:
- _SHM=yes shmover[ 77.999980] (rtnl_mutex){+.+.+.}, at: [<ffff0000089b92f8>] rtnl_lock+0x18/0x20
- ride_unlinked (2[ 77.999999]
- [ 77.999999] but task is already holding lock:
- : 64): PASS
- [ 78.000001] (&wl->mutex){+.+.+.}, at: [<ffff000000f63054>] wlcore_irq+0xdc/0x1a0 [wlcore]
- [ 78.000093]
- [ 78.000093] which lock already depends on the new lock.
- [ 78.000093]
- [ 78.000096]
- [ 78.000096] the existing dependency chain (in reverse order) is:
- [ 78.000098]
- [ 78.000098] -> #1 (&wl->mutex){+.+.+.}:
- [ 78.000114] __lock_acquire+0x17b4/0x1928
- [ 78.000119] lock_acquire+0xc8/0x290
- [ 78.000128] __mutex_lock+0x78/0x8a8
- [ 78.000132] mutex_lock_nested+0x1c/0x28
- [ 78.000205] wlcore_regdomain_config.part.25+0x20/0x78 [wlcore]
- [ 78.000273] wl1271_reg_notify+0x30/0x40 [wlcore]
- quota.sh (2M: 64)[ 78.000505] wiphy_update_regulatory+0x294/0x420 [cfg80211]
- : PASS
- [ 78.000671] wiphy_regulatory_register+0x34/0x48 [cfg80211]
- [ 78.000815] wiphy<LAVA_DISPATCHER>2017-05-15 09:52:54 AM DEBUG: expect (3589): '['<LAVA_TEST_RUNNER>: exiting', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>, '<LAVA_SIGNAL_(\\S+) ([^>]+)>', '<LAVA_MULTI_NODE> <LAVA_(\\S+) ([^>]+)>', '<LAVA_LMP> <LAVA_(\\S+) ([^>]+)>', <_sre.SRE_Pattern object at 0x24eba80>]'
- _register+0x5fc/0x7d8 [cfg80211]
- [ 78.001124] ieee80211_register_hw+0x3d4/0xa48 [mac80211]
- [ 78.001198] wlcore_nvs_cb+0x758/0x9a8 [wlcore]
- [ 78.001266] wlcore_probe+0x98/0xf0 [wlcore]
- [ 78.001318] wl18xx_probe+0x4c/0xa8 [wl18xx]
- [ 78.001330] platform_drv_probe+0x58/0xc0
- [ 78.001336] driver_probe_device+0x214/0x2d0
- [ 78.001341] __driver_attach+0xb4/0xb8
- [ 78.001345] bus_for_each_dev+0x64/0xa0
- [ 78.001349] driver_attach+0x20/0x28
- [ 78.001353] bus_add_driver+0x110/0x230
- [ 78.001358] driver_register+0x60/0xf8
- [ 78.001362] __platform_driver_register+0x40/0x48
- [ 78.001368] 0xffff000000fcf018
- [ 78.001376] do_one_initcall+0x38/0x120
- [ 78.001382] do_init_module+0x5c/0x1c0
- [ 78.001389] load_module+0x1cac/0x2428
- [ 78.001393] SyS_finit_module+0xc0/0xd0
- [ 78.001396] __sys_trace_return+0x0/0x4
- [ 78.001399]
- [ 78.001399] -> #0 (rtnl_mutex){+.+.+.}:
- [ 78.001412] print_circular_bug+0x80/0x2e0
- [ 78.001416] __lock_acquire+0x17dc/0x1928
- [ 78.001420] lock_acquire+0xc8/0x290
- [ 78.001427] __mutex_lock+0x78/0x8a8
- [ 78.001432] mutex_lock_nested+0x1c/0x28
- [ 78.001437] rtnl_lock+0x18/0x20
- [ 78.001594] cfg80211_sched_scan_results+0x60/0x230 [cfg80211]
- [ 78.001890] ieee80211_sched_scan_results+0x5c/0x1e0 [mac80211]
- [ 78.001969] wlcore_scan_sched_scan_results+0x24/0x60 [wlcore]
- [ 78.002017] wl18xx_process_mailbox_events+0x60/0x468 [wl18xx]
- [ 78.002086] wl1271_event_handle+0xc4/0x160 [wlcore]
- [ 78.002153] wlcore_irq_locked+0x4e0/0x660 [wlcore]
- [ 78.002221] wlcore_irq+0xe4/0x1a0 [wlcore]
- [ 78.002230] irq_thread_fn+0x28/0x68
- [ 78.002235] irq_thread+0x158/0x1f8
- [ 78.002241] kthread+0x108/0x138
- [ 78.002247] ret_from_fork+0x10/0x40
- [ 78.002249]
- [ 78.002249] other info that might help us debug this:
- [ 78.002249]
- [ 78.002252] Possible unsafe locking scenario:
- [ 78.002252]
- [ 78.002254] CPU0 CPU1
- [ 78.002256] ---- ----
- [ 78.002257] lock(&wl->mutex);
- [ 78.002262] lock(rtnl_mutex);
- [ 78.002268] lock(&wl->mutex);
- [ 78.002272] lock(rtnl_mutex);
- [ 78.002277]
- [ 78.002277] *** DEADLOCK ***
- [ 78.002277]
- [ 78.002282] 1 lock held by irq/56-wl18xx/2376:
- [ 78.002284] #0: (&wl->mutex){+.+.+.}, at: [<ffff000000f63054>] wlcore_irq+0xdc/0x1a0 [wlcore]
- [ 78.002357]
- [ 78.002357] stack backtrace:
- [ 78.002365] CPU: 3 PID: 2376 Comm: irq/56-wl18xx Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.002368] Hardware name: HiKey Development Board (DT)
- [ 78.002372] Call trace:
- counters.sh (2M: [ 78.002380] [<ffff00000808a028>] dump_backtrace+0x0/0x240
- 64):[ 78.002386] [<ffff00000808a32c>] show_stack+0x14/0x20
- PASS
- [ 78.002393] [<ffff0000084984f4>] dump_stack+0xbc/0xf8
- [ 78.002399] [<ffff000008124504>] print_circular_bug+0x1f4/0x2e0
- [ 78.002404] [<ffff00000812757c>] __lock_acquire+0x17dc/0x1928
- [ 78.002409] [<ffff000008127f38>] lock_acquire+0xc8/0x290
- [ 78.002416] [<ffff000008af5888>] __mutex_lock+0x78/0x8a8
- [ 78.002422] [<ffff000008af60d4>] mutex_lock_nested+0x1c/0x28
- [ 78.002428] [<ffff0000089b92f8>] rtnl_lock+0x18/0x20
- [ 78.002590] [<ffff000000d33518>] cfg80211_sched_scan_results+0x60/0x230 [cfg80211]
- [ 78.002849] [<ffff000000e3a0cc>] ieee80211_sched_scan_results+0x5c/0x1e0 [mac80211]
- [ 78.002918] [<ffff000000f7787c>] wlcore_scan_sched_scan_results+0x24/0x60 [wlcore]
- [ 78.002960] [<ffff000000fb6640>] wl18xx_process_mailbox_events+0x60/0x468 [wl18xx]
- [ 78.003029] [<ffff000000f6b874>] wl1271_event_handle+0xc4/0x160 [wlcore]
- [ 78.003097] [<ffff000000f61c28>] wlcore_irq_locked+0x4e0/0x660 [wlcore]
- [ 78.003165] [<ffff000000f6305c>] wlcore_irq+0xe4/0x1a0 [wlcore]
- [ 78.003173] [<ffff00000813dab8>] irq_thread_fn+0x28/0x68
- [ 78.003179] [<ffff00000813dda0>] irq_thread+0x158/0x1f8
- [ 78.003190] [<ffff0000080f4b38>] kthread+0x108/0x138
- [ 78.003196] [<ffff000008083710>] ret_from_fork+0x10/0x40
- [ 78.281329] __do_user_fault: 39 callbacks suppressed
- [ 78.281336] linkhuge_rw[2978]: unhandled level 2 permission fault (11) at 0x004121c0, esr 0x9200004e
- [ 78.281340] pgd = ffff80004af11000
- [ 78.281344] [004121c0] *pgd=000000004ae60003, *pud=000000004ae61003, *pmd=002000004d000fd1
- [ 78.281359] CPU: 6 PID: 2978 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.281362] Hardware name: HiKey Development Board (DT)
- [ 78.281366] task: ffff800066048000 task.stack: ffff80004aea4000
- [ 78.281374] PC is at 0x40163c
- [ 78.281378] LR is at 0x401310
- [ 78.281382] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.281385] sp : 0000fffff97fc8b0
- [ 78.281389] x29: 0000fffff97fc8b0 x28: 0000000000612ac0
- [ 78.281427] x27: 00000000deadbeef x26: 00000000004121c0
- [ 78.281434] x25: 0000000000612000 x24: 0000000000000001
- [ 78.281440] x23: 0000000000000001 x22: 0000000000000001
- [ 78.281446] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.281453] x19: 0000000000612a40 x18: 0000ffff8563d000
- [ 78.281459] x17: 0000ffff8557b570 x16: 0000ffff85682090
- [ 78.281466] x15: 0000ffff8554dea4 x14: 0000fffff97fb710
- [ 78.281472] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.281478] x11: 0000000000000000 x10: aaaaa00000000000
- [ 78.281485] x9 : 00003fffffffffff x8 : 0000000000000063
- [ 78.281491] x7 : 1000010100000000 x6 : 0000000000000b9b
- [ 78.281497] x5 : 0000000000000b9b x4 : 0000ffff856a98e0
- [ 78.281503] x3 : 0000000000000001 x2 : 0000ffff85682000
- [ 78.281510] x1 : 00000000004121c0 x0 : 0000000000000000
- [ 78.284819] linkhuge_rw[2980]: unhandled level 2 permission fault (11) at 0x004021c0, esr 0x9200004e
- [ 78.284826] pgd = ffff80004aee1000
- [ 78.284836] [004021c0] *pgd=000000004aec6003, *pud=000000004aec7003, *pmd=002000004d000fd1
- [ 78.284852] CPU: 0 PID: 2980 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.284856] Hardware name: HiKey Development Board (DT)
- [ 78.284860] task: ffff80006604c200 task.stack: ffff80004aea4000
- [ 78.284868] PC is at 0x40163c
- [ 78.284871] LR is at 0x401310
- [ 78.284875] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.284878] sp : 0000fffff97fc8b0
- [ 78.284881] x29: 0000fffff97fc8b0 x28: 0000000000612ae0
- [ 78.284887] x27: 00000000deadbeef x26: 00000000004021c0
- [ 78.284893] x25: 0000000000612000 x24: 0000000000000001
- [ 78.284900] x23: 0000000000000001 x22: 0000000000000001
- [ 78.284906] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.284912] x19: 0000000000612a40 x18: 0000ffff8563d000
- [ 78.284919] x17: 0000ffff8557b570 x16: 0000ffff85682090
- [ 78.284925] x15: 0000ffff8554dea4 x14: 0000fffff97fb710
- [ 78.284932] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.284938] x11: 0000000000000000 x10: aaaaa00000000000
- [ 78.284945] x9 : 00003fffffffffff x8 : 0000000000000063
- [ 78.284951] x7 : 1000010100000000 x6 : 0000000000000b9b
- [ 78.284964] x5 : 0000000000000b9b x4 : 0000ffff856a98e0
- [ 78.284971] x3 : 0000000000000001 x2 : 0000ffff85682000
- [ 78.284977] x1 : 00000000004021c0 x0 : 0000000000000000
- [ 78.288034] linkhuge_rw[2982]: unhandled level 2 permission fault (11) at 0x00401850, esr 0x9200004e
- [ 78.288041] pgd = ffff80004ae92000
- [ 78.288044] [00401850] *pgd=000000004ae93003, *pud=000000004ae70003, *pmd=002000004d000fd1
- [ 78.288059] CPU: 5 PID: 2982 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.288062] Hardware name: HiKey Development Board (DT)
- [ 78.288067] task: ffff80006604ac00 task.stack: ffff80004aea4000
- [ 78.288075] PC is at 0x40163c
- [ 78.288078] LR is at 0x401310
- [ 78.288083] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.288086] sp : 0000fffff97fc8b0
- [ 78.288089] x29: 0000fffff97fc8b0 x28: 0000000000612b00
- [ 78.288096] x27: 00000000deadbeef x26: 0000000000401850
- [ 78.288103] x25: 0000000000612000 x24: 0000000000000001
- [ 78.288110] x23: 0000000000000001 x22: 0000000000000001
- [ 78.288116] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.288123] x19: 0000000000612a40 x18: 0000ffff8563d000
- [ 78.288130] x17: 0000ffff8557b570 x16: 0000ffff85682090
- [ 78.288136] x15: 0000ffff8554dea4 x14: 0000fffff97fb710
- [ 78.288142] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.288149] x11: 0000000000000000 x10: aaaaa00000000000
- [ 78.288155] x9 : 00003fffffffffff x8 : 0000000000000063
- [ 78.288161] x7 : 1000010100000000 x6 : 0000000000000b9b
- [ 78.288168] x5 : 0000000000000b9b x4 : 0000ffff856a98e0
- [ 78.288174] x3 : 0000000000000001 x2 : 0000ffff85682000
- [ 78.288180] x1 : 0000000000401850 x0 : 0000000000000000
- [ 78.291419] linkhuge_rw[2984]: unhandled level 2 permission fault (11) at 0x00401788, esr 0x9200004e
- [ 78.291426] pgd = ffff80004af45000
- [ 78.291430] [00401788] *pgd=000000004af46003, *pud=000000004af47003, *pmd=002000004d000fd1
- [ 78.291444] CPU: 5 PID: 2984 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.291448] Hardware name: HiKey Development Board (DT)
- [ 78.291453] task: ffff80004af50000 task.stack: ffff80004aea4000
- [ 78.291461] PC is at 0x40163c
- [ 78.291465] LR is at 0x401310
- [ 78.291469] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.291472] sp : 0000fffff97fc8b0
- [ 78.291476] x29: 0000fffff97fc8b0 x28: 0000000000612b20
- [ 78.291483] x27: 00000000deadbeef x26: 0000000000401788
- [ 78.291490] x25: 0000000000612000 x24: 0000000000000001
- [ 78.291496] x23: 0000000000000001 x22: 0000000000000001
- [ 78.291503] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.291509] x19: 0000000000612a40 x18: 0000ffff8563d000
- [ 78.291515] x17: 0000ffff8557b570 x16: 0000ffff85682090
- [ 78.291521] x15: 0000ffff8554dea4 x14: 0000fffff97fb710
- [ 78.291528] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.291534] x11: 0000000000000000 x10: aaaaa00000000000
- [ 78.291540] x9 : 00003fffffffffff x8 : 0000000000000063
- [ 78.291546] x7 : 1000010100000000 x6 : 0000000000000b9b
- [ 78.291552] x5 : 0000000000000b9b x4 : 0000ffff856a98e0
- [ 78.291559] x3 : 0000000000000001 x2 : 0000ffff85682000
- [ 78.291565] x1 : 0000000000401788 x0 : 0000000000000000
- [ 78.331273] linkhuge_rw[2993]: unhandled level 2 permission fault (11) at 0x004121c0, esr 0x9200004e
- [ 78.331279] pgd = ffff80004aea3000
- [ 78.331283] [004121c0] *pgd=000000004af16003, *pud=000000004aeb9003, *pmd=002000004d000fd1
- [ 78.331298] CPU: 7 PID: 2993 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.331302] Hardware name: HiKey Development Board (DT)
- [ 78.331306] task: ffff80004ae42c00 task.stack: ffff80004af4c000
- [ 78.331314] PC is at 0x40163c
- [ 78.331318] LR is at 0x401310
- [ 78.331321] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.331324] sp : 0000ffffee4b75e0
- [ 78.331327] x29: 0000ffffee4b75e0 x28: 0000000000612ac0
- [ 78.331334] x27: 00000000deadbeef x26: 00000000004121c0
- [ 78.331340] x25: 0000000000612000 x24: 0000000000000001
- [ 78.331346] x23: 0000000000000001 x22: 0000000000000001
- [ 78.331353] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.331359] x19: 0000000000612a40 x18: 0000ffffad379000
- [ 78.331365] x17: 0000ffffad2b7570 x16: 0000ffffad3be090
- [ 78.331372] x15: 0000ffffad289ea4 x14: 0000ffffee4b6440
- [ 78.331378] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.331385] x11: 0000000000000000 x10: 0000aaa0a8002000
- [ 78.331391] x9 : 0000000000003fff x8 : 0000000000000063
- [ 78.331397] x7 : 0000000010000101 x6 : 0000000000000baa
- [ 78.331404] x5 : 0000000000000baa x4 : 0000ffffad3e58e0
- [ 78.331410] x3 : 0000000000000001 x2 : 0000ffffad3be000
- [ 78.331417] x1 : 00000000004121c0 x0 : 0000000000000000
- [ 78.334605] linkhuge_rw[2995]: unhandled level 2 permission fault (11) at 0x004021c0, esr 0x9200004e
- [ 78.334611] pgd = ffff800073bec000
- [ 78.334615] [004021c0] *pgd=0000000070912003, *pud=000000006619b003, *pmd=002000004d000fd1
- [ 78.334629] CPU: 0 PID: 2995 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.334632] Hardware name: HiKey Development Board (DT)
- [ 78.334635] task: ffff80004ae41600 task.stack: ffff80004af4c000
- [ 78.334642] PC is at 0x40163c
- [ 78.334646] LR is at 0x401310
- [ 78.334649] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.334652] sp : 0000ffffee4b75e0
- [ 78.334655] x29: 0000ffffee4b75e0 x28: 0000000000612ae0
- [ 78.334662] x27: 00000000deadbeef x26: 00000000004021c0
- [ 78.334668] x25: 0000000000612000 x24: 0000000000000001
- [ 78.334674] x23: 0000000000000001 x22: 0000000000000001
- [ 78.334681] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.334687] x19: 0000000000612a40 x18: 0000ffffad379000
- [ 78.334693] x17: 0000ffffad2b7570 x16: 0000ffffad3be090
- [ 78.334700] x15: 0000ffffad289ea4 x14: 0000ffffee4b6440
- [ 78.334712] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.334718] x11: 0000000000000000 x10: 0000aaa0a8000000
- [ 78.334725] x9 : 000000000fffffff x8 : 0000000000000063
- [ 78.334731] x7 : 0100000010000101 x6 : 0000000000000baa
- [ 78.334737] x5 : 0000000000000baa x4 : 0000ffffad3e58e0
- [ 78.334744] x3 : 0000000000000001 x2 : 0000ffffad3be000
- [ 78.334751] x1 : 00000000004021c0 x0 : 0000000000000000
- [ 78.337858] linkhuge_rw[2997]: unhandled level 2 permission fault (11) at 0x00401850, esr 0x9200004e
- [ 78.337865] pgd = ffff80004af45000
- [ 78.337869] [00401850] *pgd=0000000066144003, *pud=00000000660e7003, *pmd=002000004d000fd1
- [ 78.337884] CPU: 7 PID: 2997 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.337888] Hardware name: HiKey Development Board (DT)
- [ 78.337892] task: ffff80004ae40000 task.stack: ffff80004af4c000
- [ 78.337900] PC is at 0x40163c
- [ 78.337904] LR is at 0x401310
- [ 78.337908] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.337911] sp : 0000ffffee4b75e0
- [ 78.337914] x29: 0000ffffee4b75e0 x28: 0000000000612b00
- [ 78.337920] x27: 00000000deadbeef x26: 0000000000401850
- [ 78.337927] x25: 0000000000612000 x24: 0000000000000001
- [ 78.337933] x23: 0000000000000001 x22: 0000000000000001
- [ 78.337940] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.337946] x19: 0000000000612a40 x18: 0000ffffad379000
- [ 78.337952] x17: 0000ffffad2b7570 x16: 0000ffffad3be090
- [ 78.337959] x15: 0000ffffad289ea4 x14: 0000ffffee4b6440
- [ 78.337965] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.337971] x11: 0000000000000000 x10: 0000aaa0a8000000
- [ 78.337977] x9 : 000000000fffffff x8 : 0000000000000063
- [ 78.337984] x7 : 0100000010000101 x6 : 0000000000000baa
- [ 78.337990] x5 : 0000000000000baa x4 : 0000ffffad3e58e0
- [ 78.337996] x3 : 0000000000000001 x2 : 0000ffffad3be000
- [ 78.338003] x1 : 0000000000401850 x0 : 0000000000000000
- [ 78.341095] linkhuge_rw[2999]: unhandled level 2 permission fault (11) at 0x00401788, esr 0x9200004e
- [ 78.341102] pgd = ffff8000702ba000
- [ 78.341106] [00401788] *pgd=000000006619a003, *pud=0000000066063003, *pmd=002000004d000fd1
- [ 78.341120] CPU: 0 PID: 2999 Comm: linkhuge_rw Not tainted 4.12.0-rc1-next-20170515 #1
- [ 78.341123] Hardware name: HiKey Development Board (DT)
- [ 78.341127] task: ffff80004ae44200 task.stack: ffff80004af4c000
- [ 78.341134] PC is at 0x40163c
- [ 78.341137] LR is at 0x401310
- [ 78.341141] pc : [<000000000040163c>] lr : [<0000000000401310>] pstate: 60000000
- [ 78.341144] sp : 0000ffffee4b75e0
- [ 78.341147] x29: 0000ffffee4b75e0 x28: 0000000000612b20
- [ 78.341153] x27: 00000000deadbeef x26: 0000000000401788
- [ 78.341159] x25: 0000000000612000 x24: 0000000000000001
- [ 78.341166] x23: 0000000000000001 x22: 0000000000000001
- [ 78.341172] x21: 0000000000622000 x20: 0000000000612b40
- [ 78.341178] x19: 0000000000612a40 x18: 0000ffffad379000
- [ 78.341185] x17: 0000ffffad2b7570 x16: 0000ffffad3be090
- [ 78.341191] x15: 0000ffffad289ea4 x14: 0000ffffee4b6440
- [ 78.341198] x13: 75682f7665642f20 x12: 0000000000000000
- [ 78.341211] x11: 0000000000000000 x10: 0000aaa0a8000000
- [ 78.341218] x9 : 000000000fffffff x8 : 0000000000000063
- [ 78.341224] x7 : 0100000010000101 x6 : 0000000000000baa
- [ 78.341231] x5 : 0000000000000baa x4 : 0000ffffad3e58e0
- [ 78.341238] x3 : 0000000000000001 x2 : 0000ffffad3be000
- [ 78.341244] x1 : 0000000000401788 x0 : 0000000000000000
- [ 80.460360] audit: type=1701 audit(1494841973.365:21): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2811 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.477441] audit: type=1701 audit(1494841973.370:22): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2813 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.494512] audit: type=1701 audit(1494841973.376:23): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2815 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.511600] audit: type=1701 audit(1494841973.422:24): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2823 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.528736] audit: type=1701 audit(1494841973.427:25): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2825 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.545819] audit: type=1701 audit(1494841973.432:26): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2827 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.562914] audit: type=1701 audit(1494841973.437:27): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2829 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.579998] audit: type=1701 audit(1494841973.492:28): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2837 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- [ 80.597145] audit: type=1701 audit(1494841973.497:29): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2839 comm="linkhuge_rw" exe="/usr/lib/libhugetlbfs/tests/obj64/linkhuge_rw" sig=11 res=1
- mmap-gettest 10 200 (2M: 64): PASS
- mmap-cow 199 200 (2M: 64): PASS
- set shmmax limit to 419430400
- \00NOTICE: Booting Trusted Firmware
- NOTICE: BL1: v1.1(release):4adfdd0
- NOTICE: BL1: Built : 14:18:20, Feb 15 2017
- NOTICE: syspll frequency:1190494208Hz
- NOTICE: succeed to init lpddr3 rank0 dram phy
- INFO: lpddr3_freq_init, set ddrc 533mhz
- INFO: init ddr3 rank0
- INFO: ddr3 rank1 init pass
- INFO: lpddr3_freq_init, set ddrc 800mhz
- INFO: init ddr3 rank0
- INFO: ddr3 rank1 init pass
- INFO: Samsung DDR
- NOTICE: BL1: Booting BL2
- NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(release):4adfdd0
- NOTICE: BL2: Built : 14:18:20, Feb 15 2017
- NOTICE: BL1: Booting BL3-1
- NOTICE: BL3-1: v1.1(release):4adfdd0
- NOTICE: BL3-1: Built : 14:18:20, Feb 15 2INFO: TEE-CORE: Initializing (2.3.0 #1 Wed Feb 15 14:18:19 UTC 2017 aarch64)
- INFO: TEE-CORE: Initialized
- EFI stub: Using DTB from configuration table
- EFI stub: Exiting boot services and installing virtual address map...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.12.0-rc1-next-20170515 (buildslave@x86-64-07) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Mon May 15 03:12:43 UTC 2017
- [ 0.000000] Boot CPU: AArch64 Processor [410fd033]
- [ 0.000000] Machine model: HiKey Development Board
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.50 by hikey EFI Feb 15 2017 14:18:06
- [ 0.000000] efi: PROP=0x3d831298
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000078000000, size 128 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] NUMA: Adding memblock [0x0 - 0x5dfffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x5f00000 - 0x5f00fff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x5f02000 - 0x6dfefff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x6e00000 - 0x740efff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x7410000 - 0x21efffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x22000000 - 0x34ffffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x350f0000 - 0x384fffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x38500000 - 0x3879ffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x387a0000 - 0x3d76ffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d770000 - 0x3d7affff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d7b0000 - 0x3d7bffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d7c0000 - 0x3d80ffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x3d810000 - 0x3dffffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x40000000 - 0x7fffffff] on node 0
- [ 0.000000] NUMA: Initmem setup node 0 [mem 0x00000000-0x7fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x77fb8900-0x77fba57f]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000005dfffff]
- [ 0.000000] node 0: [mem 0x0000000005f00000-0x0000000005f00fff]
- [ 0.000000] node 0: [mem 0x0000000005f02000-0x0000000006dfefff]
- [ 0.000000] node 0: [mem 0x0000000006e00000-0x000000000740efff]
- [ 0.000000] node 0: [mem 0x0000000007410000-0x0000000021efffff]
- [ 0.000000] node 0: [mem 0x0000000022000000-0x0000000034ffffff]
- [ 0.000000] node 0: [mem 0x00000000350f0000-0x00000000384fffff]
- [ 0.000000] node 0: [mem 0x0000000038500000-0x000000003879ffff]
- [ 0.000000] node 0: [mem 0x00000000387a0000-0x000000003d76ffff]
- [ 0.000000] node 0: [mem 0x000000003d770000-0x000000003d7affff]
- [ 0.000000] node 0: [mem 0x000000003d7b0000-0x000000003d7bffff]
- [ 0.000000] node 0: [mem 0x000000003d7c0000-0x000000003d80ffff]
- [ 0.000000] node 0: [mem 0x000000003d810000-0x000000003dffffff]
- [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] percpu: Embedded 26 pages/cpu @ffff800077ee5000 s67272 r8192 d31032 u106496
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507149
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image console=tty0 console=ttyAMA3,115200n8 root=/dev/mmcblk0p9 rootwait rw efi=noruntime
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 1859288K/2061364K available (10812K kernel code, 1728K rwdata, 4684K rodata, 1280K init, 13175K bss, 71004K reserved, 131072K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008b10000 ( 10816 KB)
- [ 0.000000] .rodata : 0xffff000008b10000 - 0xffff000008fb0000 ( 4736 KB)
- [ 0.000000] .init : 0xffff000008fb0000 - 0xffff0000090f0000 ( 1280 KB)
- [ 0.000000] .data : 0xffff0000090f0000 - 0xffff0000092a0200 ( 1729 KB)
- [ 0.000000] .bss : 0xffff0000092a0200 - 0xffff000009f7e198 ( 13176 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Running RCU self tests
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU lockdep checking is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 1.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns
- [ 0.000005] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns
- [ 0.000153] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
- [ 0.000166] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns
- [ 0.000656] Console: colour dummy device 80x25
- [ 0.005074] console [tty0] enabled
- [ 0.005124] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.005195] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.005237] ... MAX_LOCK_DEPTH: 48
- [ 0.005279] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.005323] ... CLASSHASH_SIZE: 4096
- [ 0.005366] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.005410] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.005454] ... CHAINHASH_SIZE: 32768
- [ 0.005498] memory used by lock dependency info: 8159 kB
- [ 0.005548] per task-struct memory footprint: 1920 bytes
- [ 0.005700] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800)
- [ 0.005797] pid_max: default: 32768 minimum: 301
- [ 0.005987] Security Framework initialized
- [ 0.006930] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.007429] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.007539] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.007614] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.024247] ASID allocator initialised with 65536 entries
- [ 0.041231] EFI runtime services will be disabled.
- [ 0.056396] smp: Bringing up secondary CPUs ...
- [ 0.088854] Detected VIPT I-cache on CPU1
- [ 0.088932] CPU1: Booted secondary processor [410fd033]
- [ 0.120977] Detected VIPT I-cache on CPU2
- [ 0.121024] CPU2: Booted secondary processor [410fd033]
- [ 0.153131] Detected VIPT I-cache on CPU3
- [ 0.153168] CPU3: Booted secondary processor [410fd033]
- [ 0.185391] Detected VIPT I-cache on CPU4
- [ 0.185447] CPU4: Booted secondary processor [410fd033]
- [ 0.217471] Detected VIPT I-cache on CPU5
- [ 0.217502] CPU5: Booted secondary processor [410fd033]
- [ 0.249654] Detected VIPT I-cache on CPU6
- [ 0.249685] CPU6: Booted secondary processor [410fd033]
- [ 0.281845] Detected VIPT I-cache on CPU7
- [ 0.281877] CPU7: Booted secondary processor [410fd033]
- [ 0.282064] smp: Brought up 1 node, 8 CPUs
- [ 0.282748] SMP: Total of 8 processors activated.
- [ 0.282806] CPU features: detected feature: 32-bit EL0 Support
- [ 0.283007] CPU: All CPU(s) started at EL2
- [ 0.283187] alternatives: patching kernel code
- [ 0.285017] devtmpfs: initialized
- [ 0.299887] DMI not present or invalid.
- [ 0.302316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.302532] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.306915] pinctrl core: initialized pinctrl subsystem
- [ 0.310555] NET: Registered protocol family 16
- [ 0.313894] cpuidle: using governor menu
- [ 0.314512] vdso: 2 pages (1 code @ ffff000008b17000, 1 data @ ffff0000090f5000)
- [ 0.314607] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.320099] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.320876] Serial: AMBA PL011 UART driver
- [ 0.324987] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 rev2
- [ 0.326511] uart-pl011 f7111000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart1_pmx_func, deferring probe
- [ 0.327068] uart-pl011 f7112000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart2_pmx_func, deferring probe
- [ 0.327598] uart-pl011 f7113000.uart: could not find pctldev for node /soc/pinmux@f7010000/uart3_pmx_func, deferring probe
- [ 0.340448] hi6220-mbox f7510000.mailbox: Mailbox enabled
- [ 0.365148] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.368061] ACPI: Interpreter disabled.
- [ 0.370342] vgaarb: loaded
- [ 0.370867] SCSI subsystem initialized
- [ 0.371459] ssp-pl022 f7106000.spi: could not find pctldev for node /soc/pinmux@f7010000/spi0_pmx_func, deferring probe
- [ 0.372177] usbcore: registered new interface driver usbfs
- [ 0.372335] usbcore: registered new interface driver hub
- [ 0.372634] usbcore: registered new device driver usb
- [ 0.373025] i2c_designware f7100000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c0_pmx_func, deferring probe
- [ 0.373191] i2c_designware f7101000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c1_pmx_func, deferring probe
- [ 0.373346] i2c_designware f7102000.i2c: could not find pctldev for node /soc/pinmux@f7010000/i2c2_pmx_func, deferring probe
- [ 0.374225] pps_core: LinuxPPS API ver. 1 registered
- [ 0.374287] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.374419] PTP clock support registered
- [ 0.374752] dmi: Firmware registration failed.
- [ 0.374977] Registered efivars operations
- [ 0.375323] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.377404] clocksource: Switched to clocksource arch_sys_counter
- [ 0.491894] VFS: Disk quotas dquot_6.6.0
- [ 0.492050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.492844] pnp: PnP ACPI: disabled
- [ 0.509313] NET: Registered protocol family 2
- [ 0.510659] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.511202] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
- [ 0.514148] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.514708] UDP hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.515223] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.516176] NET: Registered protocol family 1
- [ 0.517248] RPC: Registered named UNIX socket transport module.
- [ 0.517320] RPC: Registered udp transport module.
- [ 0.517412] RPC: Registered tcp transport module.
- [ 0.517468] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.519141] kvm [1]: 8-bit VMID
- [ 0.519190] kvm [1]: IDMAP page: afd000
- [ 0.519236] kvm [1]: HYP VA range: 800000000000:ffffffffffff
- [ 0.526157] kvm [1]: Hyp mode initialized successfully
- [ 0.526272] kvm [1]: vgic-v2@f6804000
- [ 0.526641] kvm [1]: vgic interrupt IRQ1
- [ 0.526704] kvm [1]: virtual timer IRQ4
- [ 0.532949] audit: initializing netlink subsys (disabled)
- [ 0.533445] audit: type=2000 audit(0.527:1): state=initialized audit_enabled=0 res=1
- [ 0.534461] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 0.554413] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.556458] NFS: Registering the id_resolver key type
- [ 0.556690] Key type id_resolver registered
- [ 0.556747] Key type id_legacy registered
- [ 0.556811] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.557240] 9p: Installing v9fs 9p2000 file system support
- [ 0.561930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.562129] io scheduler noop registered
- [ 0.562698] io scheduler cfq registered (default)
- [ 0.562755] io scheduler mq-deadline registered
- [ 0.562809] io scheduler kyber registered
- [ 0.567506] test_firmware: interface ready
- [ 0.572878] pinctrl-single f7010000.pinmux: 159 pins at pa ffff00000a2f7000 size 636
- [ 0.573973] pinctrl-single f7010800.pinmux: 163 pins at pa ffff00000a2f9800 size 652
- [ 0.574729] pinctrl-single f8001800.pinmux: 30 pins at pa ffff00000a2fb800 size 120
- [ 0.578771] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered
- [ 0.580030] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered
- [ 0.581205] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered
- [ 0.581588] pl061_gpio f8014000.gpio: names 9 do not match number of GPIOs 8
- [ 0.582639] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered
- [ 0.583810] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered
- [ 0.584965] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered
- [ 0.586320] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered
- [ 0.587534] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered
- [ 0.587797] pl061_gpio f7024000.gpio: names 9 do not match number of GPIOs 8
- [ 0.588798] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered
- [ 0.590003] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered
- [ 0.591236] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered
- [ 0.592431] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered
- [ 0.593653] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered
- [ 0.594848] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered
- [ 0.596024] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered
- [ 0.597211] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered
- [ 0.598482] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered
- [ 0.599700] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered
- [ 0.600869] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered
- [ 0.602099] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered
- [ 0.610720] xenfs: not registering filesystem on non-xen platform
- [ 0.618465] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.621986] SuperH (H)SCI(F) driver initialized
- [ 0.622582] msm_serial: driver initialized
- [ 0.649103] loop: module loaded
- [ 0.657418] hisi_sas: driver version v1.6
- [ 0.661940] libphy: Fixed MDIO Bus: probed
- [ 0.662734] tun: Universal TUN/TAP device driver, 1.6
- [ 0.664509] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 0.664581] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 0.664741] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 0.664812] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 0.664969] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 0.665053] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 0.665700] sky2: driver version 1.30
- [ 0.666635] VFIO - User Level meta-driver version: 0.3
- [ 0.669242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.669324] ehci-pci: EHCI PCI platform driver
- [ 0.669499] ehci-platform: EHCI generic platform driver
- [ 0.669731] ehci-orion: EHCI orion driver
- [ 0.669927] ehci-exynos: EHCI EXYNOS driver
- [ 0.670112] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 0.670302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.670403] ohci-pci: OHCI PCI platform driver
- [ 0.670540] ohci-platform: OHCI generic platform driver
- [ 0.670735] ohci-exynos: OHCI EXYNOS driver
- [ 0.671425] usbcore: registered new interface driver usb-storage
- [ 0.674112] input: HISI 65xx PowerOn Key as /devices/platform/f8000000.pmic/hi65xx-powerkey.0.auto/input/input0
- [ 0.676344] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0
- [ 0.676996] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc1
- [ 0.678071] i2c /dev entries driver
- [ 0.685442] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 0
- [ 0.685507] hisi_thermal f7030700.tsensor: failed to register sensor id 0: -19
- [ 0.685513] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19
- [ 0.685539] hisi_thermal f7030700.tsensor: failed to register sensor id 1: -19
- [ 0.685545] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19
- [ 0.697462] hisi_thermal f7030700.tsensor: failed to register sensor id 3: -19
- [ 0.697549] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -19
- [ 0.712101] sdhci: Secure Digital Host Controller Interface driver
- [ 0.712184] sdhci: Copyright(c) Pierre Ossman
- [ 0.712610] Synopsys Designware Multimedia Card Interface Driver
- [ 0.713745] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.714138] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode.
- [ 0.714845] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller.
- [ 0.714919] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a
- [ 0.715046] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 40,32 bit host data width,256 deep fifo
- [ 0.715653] mmc_host mmc0: card is non-removable.
- [ 0.737665] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.754241] dwmmc_k3 f723d000.dwmmc0: 1 slots initialized
- [ 0.755064] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.755423] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode.
- [ 0.756401] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller.
- [ 0.756477] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a
- [ 0.756605] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 41,32 bit host data width,128 deep fifo
- [ 0.757084] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO
- [ 0.777610] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 0.798358] dwmmc_k3 f723e000.dwmmc1: 1 slots initialized
- [ 0.799112] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 0.799441] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 0.801594] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 0.801669] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 0.801798] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 42,32 bit host data width,128 deep fifo
- [ 0.803188] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.808532] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.809678] usbcore: registered new interface driver usbhid
- [ 0.809749] usbhid: USB HID core driver
- [ 0.815438] NET: Registered protocol family 10
- [ 0.818083] Segment Routing with IPv6
- [ 0.818217] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 0.819333] NET: Registered protocol family 17
- [ 0.819563] 9pnet: Installing 9P2000 support
- [ 0.819756] Key type dns_resolver registered
- [ 0.821986] registered taskstats version 1
- [ 0.840178] mmc_host mmc0: Bus speed (slot 0) = 51756522Hz (slot req 52000000Hz, actual 51756522HZ div = 0)
- [ 0.841007] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2
- [ 0.842754] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2
- [ 0.843926] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 rev2
- [ 0.849895] mmc0: new high speed MMC card at address 0001
- [ 0.851777] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
- [ 0.856551] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
- [ 0.857149] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
- [ 0.864234] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB
- [ 0.871644] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
- [ 0.910285] mmc_host mmc1: Bus speed (slot 0) = 99200000Hz (slot req 100000000Hz, actual 99200000HZ div = 0)
- [ 0.910319] mmc1: new ultra high speed SDR50 SDHC card at address aaaa
- [ 0.912020] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
- [ 0.914525] mmcblk1: p1
- [ 2.732311] console [ttyAMA3] enabled
- [ 2.739407] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 2.746653] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to ffff00000a521000
- [ 2.755864] ssp-pl022 f7106000.spi: Failed to work in dma mode, work without dma!
- [ 2.773161] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator
- [ 2.781733] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator
- [ 3.165595] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[1]=128
- [ 3.175058] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[2]=128
- [ 3.184483] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[3]=128
- [ 3.193906] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[4]=128
- [ 3.203329] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[5]=128
- [ 3.212752] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[6]=128
- [ 3.222175] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[7]=0
- [ 3.231423] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[8]=0
- [ 3.240670] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[9]=0
- [ 3.249918] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[10]=0
- [ 3.259253] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[11]=0
- [ 3.268589] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[12]=0
- [ 3.277925] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[13]=0
- [ 3.287259] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[14]=0
- [ 3.296594] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[15]=0
- [ 3.306018] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM
- [ 3.315002] dwc2 f72c0000.usb: DWC OTG Controller
- [ 3.320038] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1
- [ 3.327288] dwc2 f72c0000.usb: irq 38, io mem 0xf72c0000
- [ 3.335666] hub 1-0:1.0: USB hub found
- [ 3.339724] hub 1-0:1.0: 1 port detected
- [ 3.347497] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.357839] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
- [ 3.364887] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
- [ 3.371336] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
- [ 3.376773] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 42,32 bit host data width,128 deep fifo
- [ 3.386545] mmc_host mmc2: card is non-removable.
- [ 3.489791] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 3.517851] dwmmc_k3 f723f000.dwmmc2: 1 slots initialized
- [ 3.525120] rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:00:19 UTC (19)
- [ 3.531443] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range
- [ 3.542177] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0)
- [ 3.547183] LDO2_2V8: disabling
- [ 3.547215] LDO13_1V8: disabling
- [ 3.547229] LDO14_2V8: disabling
- [ 3.547244] LDO17_2V5: disabling
- [ 3.547263] ALSA device list:
- [ 3.547268] No soundcards found.
- [ 3.572803] uart-pl011 f7113000.uart: no DMA platform data
- [ 3.579294] random: fast init done
- [ 3.583679] mmc2: new SDIO card at address 0001
- [ 3.585416] EXT4-fs (mmcblk0p9): couldn't mount as ext3 due to feature incompatibilities
- [ 3.753577] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.758872] usb 1-1: new high-speed USB device number 2 using dwc2
- [ 3.811950] EXT4-fs (mmcblk0p9): recovery complete
- [ 3.817944] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.826284] VFS: Mounted root (ext4 filesystem) on device 179:9.
- [ 3.832867] devtmpfs: mounted
- [ 3.836851] Freeing unused kernel memory: 1280K
- [ 3.949609] dwc2 f72c0000.usb: Set speed to high-speed
- [ 3.972270] systemd[1]: System time before build time, advancing clock.
- [ 3.976899] hub 1-1:1.0: USB hub found
- [ 3.977346] hub 1-1:1.0: 3 ports detected
- [ 4.050607] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 4.070025] systemd[1]: Detected architecture arm64.
- Welcome to 1mReference-Platform-Build-X11 2.0+linaro
- [ 4.094947] systemd[1]: Set hostname to <hikey>.
- [ 4.265613] dwc2 f72c0000.usb: Set speed to high-speed
- [ 4.270898] usb 1-1.1: new high-speed USB device number 3 using dwc2
- [ 4.357622] dwc2 f72c0000.usb: Set speed to high-speed
- [ 4.375769] systemd[1]: Reached target Swap.
- Reached target Swap.
- [ 4.394397] systemd[1]: Listening on Journal Socket (/dev/log).
- Listening on Journal Socket (/dev/log).
- [ 4.414122] systemd[1]: Listening on Network Service Netlink Socket.
- Listening on Network Service Netlink Socket.
- [ 4.442683] systemd[1]: Created slice System Slice.
- Created slice System Slice.
- [ 4.463797] systemd[1]: Created slice system-serial\x2dgetty.slice.
- Created slice system-serial\x2dgetty.slice.
- [ 4.487515] systemd[1]: Created slice system-getty.slice.
- Created slice system-getty.slice.
- [ 4.505831] systemd[1]: Reached target Remote File Systems.
- Reached target Remote File Systems.
- Started Dispatch Password Requests to Console Directory Watch.
- Listening on Journal Audit Socket.
- Created slice User and Session Slice.
- Reached target Slices.
- Listening on Journal Socket.
- Mounting Temporary Directory...
- Starting Create list of required st... nodes for the current kernel...
- Mounting Huge Pages File System...
- Mounting Debug File System...
- Mounting POSIX Message Queue File System...
- Starting Remount Root and Kernel File Systems...
- Listening on udev Kernel Socket.
- [ 4.725164] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- Listening on udev Control Socket.
- Starting Setup Virtual Console...
- Starting Load Kernel Modules...
- Listening on /dev/initctl Compatibility Named Pipe.
- [ 4.802648] fuse init (API version 7.26)
- Listening on Syslog Socket.
- Starting Journal Service...
- Started Forward Password Requests to Wall Directory Watch.
- Reached target Paths.
- Mounted Debug File System.
- Mounted Huge Pages File System.
- Mounted POSIX Message Queue File System.
- Mounted Temporary Directory.
- Started Create list of required sta...ce nodes for the current kernel.
- Started Remount Root and Kernel File Systems.
- Started Setup Virtual Console.
- Started Load Kernel Modules.
- Started Journal Service.
- Starting Apply Kernel Variables...
- Mounting Configuration File System...
- Mounting FUSE Control File System...
- Starting udev Coldplug all Devices...
- Starting Flush Journal to Persistent Storage...
- Starting Create Static Device Nodes in /dev...
- Mounted Configuration File System.
- Mounted FUSE Control File System.
- Started Apply Kernel Variables.
- Started Create Static Device Nodes in /dev.
- Reached target Local File Systems (Pre).
- Mounting /var/volatile...
- Starting udev Kernel Device Manager...
- Mounted /var/volatile.
- [ 5.374642] systemd-journald[1374]: Received request to flush runtime journal from PID 1
- Starting Load/Save Random Seed...
- Reached target Local File Systems.
- Started udev Kernel Device Manager.
- Started Flush Journal to Persistent Storage.
- [ 5.448826] random: crng init done
- Started Load/Save Random Seed.
- Starting Create Volatile Files and Directories...
- Started Create Volatile Files and Directories.
- Starting Network Time Synchronization...
- Starting Update UTMP about System Boot/Shutdown...
- Started Update UTMP about System Boot/Shutdown.
- Started Network Time Synchronization.
- Reached target System Time Synchronized.
- Started udev Coldplug all Devices.
- Reached target System Initialization.
- [ 5.939742] adv7511 2-0039: 2-0039 supply avdd not found, using dummy regulator
- Starting sshd.so[ 5.949995] adv7511 2-0039: 2-0039 supply dvdd not found, using dummy regulator
- cket.
- [ 5.959494] adv7511 2-0039: 2-0039 supply pvdd not found, using dummy regulator
- [ 5.968511] adv7511 2-0039: 2-0039 supply a2vdd not found, using dummy regulator
- [ 5.979854] adv7511 2-0039: 2-0039 supply v3p3 not found, using dummy regulator
- [ 5.988333] adv7511 2-0039: 2-0039 supply v1p2 not found, using dummy regulator
- Listening on D-Bus System Message Bus Socket.
- Listening on RPCbind Server Activation Socket.
- Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- Starting Docker Socket for the API.
- Started Daily Cleanup of Temporary Directories.
- Reached target Timers.
- Listening on sshd.socket.
- [ 6.138954] usb 1-1.1: applying rev.C fixup
- [ 6.154662] usb 1-1.1: applying rev.C fixup
- Listen[ 6.173793] MOSCHIP usb-ethernet driver 1-1.1:1.0 eth0: register 'MOSCHIP usb-ethernet driver' at usb-f72c0000.usb-1.1, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:13:3b:07:02:35
- ing on Docker Socket for the API.
- [ 6.193503] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- Found device /dev/ttyAMA3.
- [ 6.394678] wl18xx_driver wl18xx.3.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
- [ 6.405645] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
- [ 6.405656] wlcore: WARNING falling back to default config
- Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Reached target Sockets.
- Reached target Basic System.
- Started System Logging Service.
- Started TEE Supplicant.
- Started Kernel Logging Service.
- Started Periodic Command Scheduler.
- Started D-Bus System Message Bus.
- [ 6.646386] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
- Starting Network Service...
- Starting Login Service...
- [ 6.682276] wlcore: loaded
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Network Manager...
- Started Job spooling tools.
- Started Network Service.
- Started Avahi mDNS/DNS-SD Stack.
- Started Login Service.
- Starting Load/Save RF Kill Switch Status...
- Started Load/Save RF Kill Switch Status.
- Started Network Manager.
- Reached target Network.
- Starting DNS forwarder and DHCP server...
- Starting Permit User Sessions...
- Starting Network Name Resolution...
- [ 7.031179] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Started Docker[ 7.040224] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Application Container Engine.
- [ 7.068387] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- Started Permit User Sessions.
- Started Network Name Resolution.
- Started Getty on tty1.
- Started Serial Getty on ttyAMA3.
- [ 7.201711] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
- [ 7.246914] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0)
- [ 7.567514] wlcore: PHY firmware version: Rev 8.2.0.0.236
- [ 7.669951] wlcore: firmware booted (Rev 8.9.0.0.69)
- [ 7.697713] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- Started DNS forwarder and DHCP server.
- Starting WPA supplicant...
- Starting Authorization Manager...
- Started WPA supplicant.
- [ 8.048897] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- Started Authorization Manager.
- [ 8.783369] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 9.569911] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 9.587333] Bridge firewalling registered
- [ 9.613938] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 9.691476] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 9.704816] audit: type=1325 audit(1494841912.119:2): table=filter family=2 entries=0
- [ 9.713480] audit: type=1300 audit(1494841912.119:2): arch=c00000b7 syscall=273 success=yes exit=0 a0=0 a1=419308 a2=0 a3=0 items=0 ppid=57 pid=2481 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/bin/kmod" key=(null)
- [ 9.739534] audit: type=1327 audit(1494841912.119:2): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
- [ 9.764773] audit: type=1325 audit(1494841912.178:3): table=nat family=2 entries=0
- [ 9.772641] audit: type=1300 audit(1494841912.178:3): arch=c00000b7 syscall=273 success=yes exit=0 a0=1 a1=419308 a2=0 a3=1 items=0 ppid=57 pid=2489 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/bin/kmod" key=(null)
- [ 9.798594] audit: type=1327 audit(1494841912.178:3): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174
- [ 9.888532] audit: type=1325 audit(1494841912.303:4): table=nat family=2 entries=5
- [ 9.896353] audit: type=1300 audit(1494841912.303:4): arch=c00000b7 syscall=208 success=yes exit=0 a0=4 a1=0 a2=40 a3=2ef7f720 items=0 ppid=2403 pid=2510 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-multi" key=(null)
- [ 9.924023] audit: type=1327 audit(1494841912.303:4): proctitle=2F7573722F7362696E2F69707461626C6573002D2D77616974002D74006E6174002D4E00444F434B4552
- [ 9.937577] audit: type=1325 audit(1494841912.321:5): table=filter family=2 entries=4
- [ 10.182300] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
- Starting Network Manager Script Dispatcher Service...
- Started Network Manager Script Dispatcher Service.
- Reference-Platform-Build-X11 2.0+linaro hikey ttyAMA3
- hikey login: [ 76.037623]
- [ 76.039134] ======================================================
- [ 76.045319] WARNING: possible circular locking dependency detected
- [ 76.051507] 4.12.0-rc1-next-20170515 #1 Not tainted
- [ 76.056387] ------------------------------------------------------
- [ 76.062572] irq/56-wl18xx/2354 is trying to acquire lock:
- [ 76.067974] (rtnl_mutex){+.+.+.}, at: [<ffff0000089b92f8>] rtnl_lock+0x18/0x20
- [ 76.075309]
- [ 76.075309] but task is already holding lock:
- [ 76.081145] (&wl->mutex){+.+.+.}, at: [<ffff000000f24054>] wlcore_irq+0xdc/0x1a0 [wlcore]
- [ 76.089510]
- [ 76.089510] which lock already depends on the new lock.
- [ 76.089510]
- [ 76.097697]
- [ 76.097697] the existing dependency chain (in reverse order) is:
- [ 76.105187]
- [ 76.105187] -> #1 (&wl->mutex){+.+.+.}:
- [ 76.110519] __lock_acquire+0x17b4/0x1928
- [ 76.115053] lock_acquire+0xc8/0x290
- [ 76.119155] __mutex_lock+0x78/0x8a8
- [ 76.123261] mutex_lock_nested+0x1c/0x28
- [ 76.127775] wlcore_regdomain_config.part.25+0x20/0x78 [wlcore]
- [ 76.134292] wl1271_reg_notify+0x30/0x40 [wlcore]
- [ 76.139727] wiphy_update_regulatory+0x294/0x420 [cfg80211]
- [ 76.145975] wiphy_regulatory_register+0x34/0x48 [cfg80211]
- [ 76.152218] wiphy_register+0x5fc/0x7d8 [cfg80211]
- [ 76.157812] ieee80211_register_hw+0x3d4/0xa48 [mac80211]
- [ 76.163811] wlcore_nvs_cb+0x758/0x9a8 [wlcore]
- [ 76.168936] wlcore_probe+0x98/0xf0 [wlcore]
- [ 76.173779] wl18xx_probe+0x4c/0xa8 [wl18xx]
- [ 76.178586] platform_drv_probe+0x58/0xc0
- [ 76.183127] driver_probe_device+0x214/0x2d0
- [ 76.187926] __driver_attach+0xb4/0xb8
- [ 76.192204] bus_for_each_dev+0x64/0xa0
- [ 76.196568] driver_attach+0x20/0x28
- [ 76.200672] bus_add_driver+0x110/0x230
- [ 76.205037] driver_register+0x60/0xf8
- [ 76.209315] __platform_driver_register+0x40/0x48
- [ 76.214551] 0xffff000000f90018
- [ 76.218222] do_one_initcall+0x38/0x120
- [ 76.222589] do_init_module+0x5c/0x1c0
- [ 76.226868] load_module+0x1cac/0x2428
- [ 76.231145] SyS_finit_module+0xc0/0xd0
- [ 76.235510] __sys_trace_return+0x0/0x4
- [ 76.239872]
- [ 76.239872] -> #0 (rtnl_mutex){+.+.+.}:
- [ 76.245215] print_circular_bug+0x80/0x2e0
- [ 76.249840] __lock_acquire+0x17dc/0x1928
- [ 76.254379] lock_acquire+0xc8/0x290
- [ 76.258485] __mutex_lock+0x78/0x8a8
- [ 76.262589] mutex_lock_nested+0x1c/0x28
- [ 76.267042] rtnl_lock+0x18/0x20
- [ 76.270956] cfg80211_sched_scan_results+0x60/0x230 [cfg80211]
- [ 76.277587] ieee80211_sched_scan_results+0x5c/0x1e0 [mac80211]
- [ 76.284117] wlcore_scan_sched_scan_results+0x24/0x60 [wlcore]
- [ 76.290523] wl18xx_process_mailbox_events+0x60/0x468 [wl18xx]
- [ 76.296955] wl1271_event_handle+0xc4/0x160 [wlcore]
- [ 76.302514] wlcore_irq_locked+0x4e0/0x660 [wlcore]
- [ 76.307986] wlcore_irq+0xe4/0x1a0 [wlcore]
- [ 76.312703] irq_thread_fn+0x28/0x68
- [ 76.316809] irq_thread+0x158/0x1f8
- [ 76.320827] kthread+0x108/0x138
- [ 76.324584] ret_from_fork+0x10/0x40
- [ 76.328686]
- [ 76.328686] other info that might help us debug this:
- [ 76.328686]
- [ 76.336715] Possible unsafe locking scenario:
- [ 76.336715]
- [ 76.342650] CPU0 CPU1
- [ 76.347186] ---- ----
- [ 76.351722] lock(&wl->mutex);
- [ 76.354872] lock(rtnl_mutex);
- [ 76.360543] lock(&wl->mutex);
- [ 76.366213] lock(rtnl_mutex);
- [ 76.369361]
- [ 76.369361] *** DEADLOCK ***
- [ 76.369361]
- [ 76.375304] 1 lock held by irq/56-wl18xx/2354:
- [ 76.379753] #0: (&wl->mutex){+.+.+.}, at: [<ffff000000f24054>] wlcore_irq+0xdc/0x1a0 [wlcore]
- [ 76.388547]
- [ 76.388547] stack backtrace:
- [ 76.392922] CPU: 4 PID: 2354 Comm: irq/56-wl18xx Not tainted 4.12.0-rc1-next-20170515 #1
- [ 76.401032] Hardware name: HiKey Development Board (DT)
- [ 76.406267] Call trace:
- [ 76.408720] [<ffff00000808a028>] dump_backtrace+0x0/0x240
- [ 76.414131] [<ffff00000808a32c>] show_stack+0x14/0x20
- [ 76.419195] [<ffff0000084984f4>] dump_stack+0xbc/0xf8
- [ 76.424258] [<ffff000008124504>] print_circular_bug+0x1f4/0x2e0
- [ 76.430190] [<ffff00000812757c>] __lock_acquire+0x17dc/0x1928
- [ 76.435947] [<ffff000008127f38>] lock_acquire+0xc8/0x290
- [ 76.441272] [<ffff000008af5888>] __mutex_lock+0x78/0x8a8
- [ 76.446595] [<ffff000008af60d4>] mutex_lock_nested+0x1c/0x28
- [ 76.452267] [<ffff0000089b92f8>] rtnl_lock+0x18/0x20
- [ 76.457402] [<ffff000000cf4518>] cfg80211_sched_scan_results+0x60/0x230 [cfg80211]
- [ 76.465253] [<ffff000000dfb0cc>] ieee80211_sched_scan_results+0x5c/0x1e0 [mac80211]
- [ 76.472994] [<ffff000000f3887c>] wlcore_scan_sched_scan_results+0x24/0x60 [wlcore]
- [ 76.480624] [<ffff000000f77640>] wl18xx_process_mailbox_events+0x60/0x468 [wl18xx]
- [ 76.488278] [<ffff000000f2c874>] wl1271_event_handle+0xc4/0x160 [wlcore]
- [ 76.495056] [<ffff000000f22c28>] wlcore_irq_locked+0x4e0/0x660 [wlcore]
- [ 76.501747] [<ffff000000f2405c>] wlcore_irq+0xe4/0x1a0 [wlcore]
- [ 76.507682] [<ffff00000813dab8>] irq_thread_fn+0x28/0x68
- [ 76.513005] [<ffff00000813dda0>] irq_thread+0x158/0x1f8
- [ 76.518242] [<ffff0000080f4b38>] kthread+0x108/0x138
- [ 76.523217] [<ffff000008083710>] ret_from_fork+0x10/0x40
Add Comment
Please, Sign In to add comment