API tools faq
paste
Guest User

Untitled

a guest
May 23rd, 2021
40
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.88 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 5.12.1-lupi (sam@Gas-Gas-Gas) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #5 SMP Sun May 23 18:59:01 EDT 2021
  2. [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
  3. [ 0.000000] BIOS-provided physical RAM map:
  4. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
  5. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  6. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
  7. [ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
  8. [ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
  9. [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
  10. [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
  11. [ 0.000000] SMBIOS 2.2 present.
  12. [ 0.000000] DMI: VIA Technologies, Inc. VT82C694X/10, BIOS 6.00 PG 02/12/2001
  13. [ 0.000000] tsc: Fast TSC calibration using PIT
  14. [ 0.000000] tsc: Detected 999.630 MHz processor
  15. [ 0.002135] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
  16. [ 0.002685] x86/PAT: PAT not supported by the CPU.
  17. [ 0.003585] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
  18. [ 0.016408] check: Scanning 1 areas for low memory corruption
  19. [ 0.016527] RAMDISK: [mem 0x1fbbe000-0x1ffeffff]
  20. [ 0.016557] ACPI: Early table checksum verification disabled
  21. [ 0.016574] ACPI: RSDP 0x00000000000F6170 000014 (v00 AOPEN )
  22. [ 0.016594] ACPI: RSDT 0x000000001FFF3000 000028 (v01 AOPEN AWRDACPI 42302E31 AWRD 00000000)
  23. [ 0.016619] ACPI: FACP 0x000000001FFF3040 000074 (v01 AOPEN AWRDACPI 42302E31 AWRD 00000000)
  24. [ 0.016645] ACPI: DSDT 0x000000001FFF30C0 0023EA (v01 AOPEN AWRDACPI 00001000 MSFT 0100000C)
  25. [ 0.016665] ACPI: FACS 0x000000001FFF0000 000040
  26. [ 0.016679] ACPI: Reserving FACP table memory at [mem 0x1fff3040-0x1fff30b3]
  27. [ 0.016688] ACPI: Reserving DSDT table memory at [mem 0x1fff30c0-0x1fff54a9]
  28. [ 0.016697] ACPI: Reserving FACS table memory at [mem 0x1fff0000-0x1fff003f]
  29. [ 0.016746] 0MB HIGHMEM available.
  30. [ 0.016752] 511MB LOWMEM available.
  31. [ 0.016758] mapped low ram: 0 - 1fff0000
  32. [ 0.016764] low ram: 0 - 1fff0000
  33. [ 0.016787] Zone ranges:
  34. [ 0.016792] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  35. [ 0.016803] Normal [mem 0x0000000001000000-0x000000001ffeffff]
  36. [ 0.016813] HighMem empty
  37. [ 0.016821] Movable zone start for each node
  38. [ 0.016826] Early memory node ranges
  39. [ 0.016830] node 0: [mem 0x0000000000001000-0x000000000009ffff]
  40. [ 0.016839] node 0: [mem 0x0000000000100000-0x000000001ffeffff]
  41. [ 0.016848] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffeffff]
  42. [ 0.050941] Using APIC driver default
  43. [ 0.051054] ACPI: PM-Timer IO Port: 0x4008
  44. [ 0.051083] Local APIC disabled by BIOS -- you can enable it with "lapic"
  45. [ 0.051091] APIC: disable apic facility
  46. [ 0.051096] APIC: switched to apic NOOP
  47. [ 0.051105] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
  48. [ 0.051147] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
  49. [ 0.051161] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
  50. [ 0.051169] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
  51. [ 0.051182] [mem 0x20000000-0xfffeffff] available for PCI devices
  52. [ 0.051198] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  53. [ 0.051229] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
  54. [ 0.051894] percpu: Embedded 32 pages/cpu s109868 r0 d21204 u131072
  55. [ 0.052011] Built 1 zonelists, mobility grouping on. Total pages: 129935
  56. [ 0.052034] Kernel command line: BOOT_IMAGE=../vmlinuz root=PARTUUID=7e3d6793-01 rootfstype=ext2 rootdelay=5 rw console=ttyS1,115200 console=tty0 initrd=../lupi.img
  57. [ 0.053115] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  58. [ 0.053456] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  59. [ 0.053576] mem auto-init: stack:off, heap alloc:off, heap free:off
  60. [ 0.053605] Initializing HighMem for node 0 (00000000:00000000)
  61. [ 0.053620] Initializing Movable for node 0 (00000000:00000000)
  62. [ 0.079595] Memory: 495248K/523836K available (12264K kernel code, 1917K rwdata, 2776K rodata, 1888K init, 524K bss, 28588K reserved, 0K cma-reserved, 0K highmem)
  63. [ 0.079630] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  64. [ 0.079895] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  65. [ 0.080603] rcu: Hierarchical RCU implementation.
  66. [ 0.080644] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
  67. [ 0.080655] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
  68. [ 0.080663] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  69. [ 0.086476] NR_IRQS: 2304, nr_irqs: 24, preallocated irqs: 16
  70. [ 0.087221] random: get_random_bytes called from start_kernel+0x2f8/0x475 with crng_init=0
  71. [ 0.090294] Console: colour VGA+ 80x25
  72. [ 0.095567] printk: console [tty0] enabled
  73. [ 0.544524] printk: console [ttyS1] enabled
  74. [ 0.548793] ACPI: Core revision 20210105
  75. [ 0.552980] ACPI: setting ELCR to 0020 (from 1c20)
  76. [ 0.557932] APIC: Keep in PIC mode(8259)
  77. [ 0.561942] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd17325d26, max_idle_ns: 881590495706 ns
  78. [ 0.572571] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.26 BogoMIPS (lpj=999630)
  79. [ 0.573566] pid_max: default: 32768 minimum: 301
  80. [ 0.574649] LSM: Security Framework initializing
  81. [ 0.575596] SELinux: Initializing.
  82. [ 0.576653] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  83. [ 0.577571] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  84. [ 0.580156] CPU serial number disabled.
  85. [ 0.580634] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
  86. [ 0.581565] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
  87. [ 0.582574] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  88. [ 0.583569] Spectre V2 : Mitigation: Full generic retpoline
  89. [ 0.584564] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  90. [ 0.585565] Speculative Store Bypass: Vulnerable
  91. [ 0.586564] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
  92. [ 0.587569] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
  93. [ 0.600290] Freeing SMP alternatives memory: 44K
  94. [ 0.602876] smpboot: weird, boot CPU (#0) not listed by the BIOS
  95. [ 0.603578] smpboot: SMP disabled
  96. [ 0.606051] Performance Events:
  97. [ 0.606078] no APIC, boot with the "lapic" boot parameter to force-enable it.
  98. [ 0.607566] no hardware sampling interrupt available.
  99. [ 0.608569] p6 PMU driver.
  100. [ 0.609568] ... version: 0
  101. [ 0.610566] ... bit width: 32
  102. [ 0.611566] ... generic registers: 2
  103. [ 0.612566] ... value mask: 00000000ffffffff
  104. [ 0.613566] ... max period: 000000007fffffff
  105. [ 0.614566] ... fixed-purpose events: 0
  106. [ 0.615566] ... event mask: 0000000000000003
  107. [ 0.617679] rcu: Hierarchical SRCU implementation.
  108. [ 0.618885] smp: Bringing up secondary CPUs ...
  109. [ 0.620583] smp: Brought up 1 node, 1 CPU
  110. [ 0.621568] smpboot: Max logical packages: 1
  111. [ 0.622566] smpboot: Total of 1 processors activated (1999.26 BogoMIPS)
  112. [ 0.624128] devtmpfs: initialized
  113. [ 0.626317] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
  114. [ 0.626828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  115. [ 0.628680] futex hash table entries: 256 (order: 1, 8192 bytes, linear)
  116. [ 0.629790] PM: RTC time: 22:28:09, date: 2021-05-23
  117. [ 0.630958] NET: Registered protocol family 16
  118. [ 0.632989] kworker/u2:0 (17) used greatest stack depth: 7044 bytes left
  119. [ 0.634811] audit: initializing netlink subsys (disabled)
  120. [ 0.638061] thermal_sys: Registered thermal governor 'step_wise'
  121. [ 0.638086] thermal_sys: Registered thermal governor 'user_space'
  122. [ 0.638737] cpuidle: using governor menu
  123. [ 0.640607] audit: type=2000 audit(1621808889.066:1): state=initialized audit_enabled=0 res=1
  124. [ 0.644694] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
  125. [ 0.645741] ACPI: bus type PCI registered
  126. [ 0.679150] PCI: PCI BIOS revision 2.10 entry at 0xfb340, last bus=1
  127. [ 0.679566] PCI: Using configuration type 1 for base access
  128. [ 0.688830] kworker/u2:1 (39) used greatest stack depth: 6828 bytes left
  129. [ 0.803761] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
  130. [ 0.807991] ACPI: Added _OSI(Module Device)
  131. [ 0.808612] ACPI: Added _OSI(Processor Device)
  132. [ 0.809572] ACPI: Added _OSI(3.0 _SCP Extensions)
  133. [ 0.810568] ACPI: Added _OSI(Processor Aggregator Device)
  134. [ 0.812769] ACPI: Added _OSI(Linux-Dell-Video)
  135. [ 0.813713] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  136. [ 0.814587] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
  137. [ 0.819844] ACPI: 1 ACPI AML tables successfully acquired and loaded
  138. [ 0.822887] ACPI: Interpreter enabled
  139. [ 0.823642] ACPI: (supports S0 S1 S4 S5)
  140. [ 0.824568] ACPI: Using PIC for interrupt routing
  141. [ 0.825565] random: fast init done
  142. [ 0.826775] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  143. [ 0.827892] ACPI: Enabled 4 GPEs in block 00 to 0F
  144. [ 0.853674] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  145. [ 0.855050] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments HPX-Type3]
  146. [ 0.855630] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
  147. [ 0.857224] PCI host bridge to bus 0000:00
  148. [ 0.858588] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  149. [ 0.859585] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  150. [ 0.861585] pci_bus 0000:00: root bus resource [bus 00-ff]
  151. [ 0.862740] pci 0000:00:00.0: [1106:0691] type 00 class 0x060000
  152. [ 0.863591] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd3ffffff pref]
  153. [ 0.865730] pci 0000:00:01.0: [1106:8598] type 01 class 0x060400
  154. [ 0.866642] pci 0000:00:01.0: supports D1
  155. [ 0.868095] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100
  156. [ 0.869203] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a
  157. [ 0.869641] pci 0000:00:07.1: reg 0x20: [io 0xc000-0xc00f]
  158. [ 0.870583] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  159. [ 0.871568] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  160. [ 0.872570] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  161. [ 0.873567] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  162. [ 0.875755] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300
  163. [ 0.876624] pci 0000:00:07.2: reg 0x20: [io 0xc400-0xc41f]
  164. [ 0.878334] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300
  165. [ 0.879616] pci 0000:00:07.3: reg 0x20: [io 0xc800-0xc81f]
  166. [ 0.882256] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000
  167. [ 0.882704] pci 0000:00:07.4: quirk: [io 0x6000-0x607f] claimed by vt82c686 HW-mon
  168. [ 0.883589] pci 0000:00:07.4: quirk: [io 0x5000-0x500f] claimed by vt82c686 SMB
  169. [ 0.885691] pci 0000:00:08.0: [1102:0004] type 00 class 0x040100
  170. [ 0.886599] pci 0000:00:08.0: reg 0x10: [io 0xcc00-0xcc3f]
  171. [ 0.888925] pci 0000:00:08.0: supports D1 D2
  172. [ 0.890762] pci 0000:00:08.1: [1102:7003] type 00 class 0x098000
  173. [ 0.891603] pci 0000:00:08.1: reg 0x10: [io 0xd000-0xd007]
  174. [ 0.892663] pci 0000:00:08.1: supports D1 D2
  175. [ 0.894064] pci 0000:00:08.2: [1102:4001] type 00 class 0x0c0010
  176. [ 0.894607] pci 0000:00:08.2: reg 0x10: [mem 0xd9005000-0xd90057ff]
  177. [ 0.895585] pci 0000:00:08.2: reg 0x14: [mem 0xd9000000-0xd9003fff]
  178. [ 0.897702] pci 0000:00:08.2: supports D1 D2
  179. [ 0.898592] pci 0000:00:08.2: PME# supported from D0 D1 D2 D3hot
  180. [ 0.900637] pci 0000:00:0b.0: [10b7:9200] type 00 class 0x020000
  181. [ 0.901594] pci 0000:00:0b.0: reg 0x10: [io 0xd400-0xd47f]
  182. [ 0.902574] pci 0000:00:0b.0: reg 0x14: [mem 0xd9004000-0xd900407f]
  183. [ 0.903596] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  184. [ 0.904807] pci 0000:00:0b.0: supports D1 D2
  185. [ 0.905583] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
  186. [ 0.906958] pci 0000:00:0c.0: [1095:0680] type 00 class 0x018000
  187. [ 0.907597] pci 0000:00:0c.0: reg 0x10: [io 0xd800-0xd807]
  188. [ 0.908575] pci 0000:00:0c.0: reg 0x14: [io 0xdc00-0xdc03]
  189. [ 0.909574] pci 0000:00:0c.0: reg 0x18: [io 0xe000-0xe007]
  190. [ 0.910576] pci 0000:00:0c.0: reg 0x1c: [io 0xe400-0xe403]
  191. [ 0.911574] pci 0000:00:0c.0: reg 0x20: [io 0xe800-0xe80f]
  192. [ 0.912574] pci 0000:00:0c.0: reg 0x24: [mem 0xd9006000-0xd90060ff]
  193. [ 0.913574] pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
  194. [ 0.914813] pci 0000:00:0c.0: supports D1 D2
  195. [ 0.915974] pci_bus 0000:01: extended config space not accessible
  196. [ 0.916753] pci 0000:01:00.0: [10de:002d] type 00 class 0x030000
  197. [ 0.917601] pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd6ffffff]
  198. [ 0.918574] pci 0000:01:00.0: reg 0x14: [mem 0xd4000000-0xd5ffffff pref]
  199. [ 0.919593] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  200. [ 0.922173] pci 0000:00:01.0: PCI bridge to [bus 01]
  201. [ 0.922591] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd7ffffff]
  202. [ 0.923579] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd5ffffff pref]
  203. [ 0.926437] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
  204. [ 0.926995] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
  205. [ 0.927905] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  206. [ 0.929949] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
  207. [ 0.935886] pci 0000:01:00.0: vgaarb: setting as boot VGA device
  208. [ 0.936560] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  209. [ 0.936595] pci 0000:01:00.0: vgaarb: bridge control possible
  210. [ 0.937570] vgaarb: loaded
  211. [ 0.940889] SCSI subsystem initialized
  212. [ 0.943145] ACPI: bus type USB registered
  213. [ 0.945924] usbcore: registered new interface driver usbfs
  214. [ 0.948038] usbcore: registered new interface driver hub
  215. [ 0.949654] usbcore: registered new device driver usb
  216. [ 0.950944] pps_core: LinuxPPS API ver. 1 registered
  217. [ 0.951599] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  218. [ 0.954360] PTP clock support registered
  219. [ 0.955865] EDAC MC: Ver: 3.0.0
  220. [ 0.958690] Advanced Linux Sound Architecture Driver Initialized.
  221. [ 0.961368] NetLabel: Initializing
  222. [ 0.961625] NetLabel: domain hash size = 128
  223. [ 0.962566] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  224. [ 0.965351] NetLabel: unlabeled traffic allowed by default
  225. [ 0.966021] PCI: Using ACPI for IRQ routing
  226. [ 0.967285] clocksource: Switched to clocksource tsc-early
  227. [ 1.540551] VFS: Disk quotas dquot_6.6.0
  228. [ 1.544662] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  229. [ 1.551931] pnp: PnP ACPI init
  230. [ 1.556324] system 00:00: [mem 0x000cc800-0x000cffff] has been reserved
  231. [ 1.563311] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
  232. [ 1.570417] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
  233. [ 1.577504] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
  234. [ 1.584568] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved
  235. [ 1.591621] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
  236. [ 1.598334] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
  237. [ 1.605397] system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
  238. [ 1.612451] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
  239. [ 1.619991] system 00:01: [io 0x04d0-0x04d1] has been reserved
  240. [ 1.632816] pnp: PnP ACPI: found 8 devices
  241. [ 1.652539] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large:
  242. [ 1.664323] clocksource: 'pit' wd_now: eabd3acf wd_last: eab40df3 mask: ffffffff
  243. [ 1.673719] clocksource: 'tsc-early' cs_now: 5e5e753f5 cs_last: 5c39619d1 mask: ffffffffffffffff
  244. [ 1.684509] tsc: Marking TSC unstable due to clocksource watchdog
  245. [ 1.694116] clocksource: Switched to clocksource pit
  246. [ 1.740442] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  247. [ 1.742339] clocksource: Switched to clocksource acpi_pm
  248. [ 1.748085] NET: Registered protocol family 2
  249. [ 1.753331] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  250. [ 1.761927] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
  251. [ 1.769833] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
  252. [ 1.777159] TCP: Hash tables configured (established 4096 bind 4096)
  253. [ 1.783784] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  254. [ 1.790498] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  255. [ 1.797820] NET: Registered protocol family 1
  256. [ 1.802902] RPC: Registered named UNIX socket transport module.
  257. [ 1.808966] RPC: Registered udp transport module.
  258. [ 1.813766] RPC: Registered tcp transport module.
  259. [ 1.818565] RPC: Registered tcp NFSv4.1 backchannel transport module.
  260. [ 1.826324] pci 0000:00:0c.0: BAR 6: assigned [mem 0x20000000-0x2007ffff pref]
  261. [ 1.833769] pci 0000:00:0b.0: BAR 6: assigned [mem 0x20080000-0x2009ffff pref]
  262. [ 1.841317] pci 0000:01:00.0: BAR 6: assigned [mem 0xd7000000-0xd700ffff pref]
  263. [ 1.848692] pci 0000:00:01.0: PCI bridge to [bus 01]
  264. [ 1.853763] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd7ffffff]
  265. [ 1.860646] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd5ffffff pref]
  266. [ 1.867986] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  267. [ 1.873654] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  268. [ 1.880022] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd7ffffff]
  269. [ 1.886380] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd5ffffff pref]
  270. [ 1.893340] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
  271. [ 1.899218] pci 0000:00:07.0: Disabling VIA external APIC routing
  272. [ 1.906498] PCI Interrupt Link [LNKB] enabled at IRQ 10
  273. [ 1.911867] pci 0000:00:07.2: VIA VLink IRQ fixup, from 12 to 10
  274. [ 1.918172] pci 0000:00:07.2: quirk_usb_early_handoff+0x0/0x710 took 12441 usecs
  275. [ 1.925880] pci 0000:00:07.3: VIA VLink IRQ fixup, from 12 to 10
  276. [ 1.932199] pci 0000:00:0c.0: CLS mismatch (32 != 4), using 32 bytes
  277. [ 1.938661] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  278. [ 2.437936] Unpacking initramfs...
  279. [ 2.501181] Freeing initrd memory: 4296K
  280. [ 2.507234] check: Scanning for low memory corruption every 60 seconds
  281. [ 2.518018] Initialise system trusted keyrings
  282. [ 2.524970] workingset: timestamp_bits=30 max_order=17 bucket_order=0
  283. [ 2.538362] NFS: Registering the id_resolver key type
  284. [ 2.543949] Key type id_resolver registered
  285. [ 2.548355] Key type id_legacy registered
  286. [ 2.552527] ntfs: driver 2.1.32 [Flags: R/W].
  287. [ 2.626553] Key type asymmetric registered
  288. [ 2.630918] Asymmetric key parser 'x509' registered
  289. [ 2.636081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  290. [ 2.643613] io scheduler mq-deadline registered
  291. [ 2.648236] io scheduler kyber registered
  292. [ 2.654021] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  293. [ 2.663705] ACPI: button: Power Button [PWRB]
  294. [ 2.669014] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  295. [ 2.677224] ACPI: button: Power Button [PWRF]
  296. [ 2.684950] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  297. [ 2.692732] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  298. [ 2.700871] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
  299. [ 2.711921] Non-volatile memory driver v1.3
  300. [ 2.718779] Linux agpgart interface v0.103
  301. [ 2.742960] loop: module loaded
  302. [ 2.746870] Uniform Multi-Platform E-IDE driver
  303. [ 2.751965] via82cxxx 0000:00:07.1: VIA vt82c686b (rev 40) IDE UDMA100
  304. [ 2.761818] via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06)
  305. [ 2.769026] via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
  306. [ 2.776448] legacy IDE will be removed in 2021, please switch to libata
  307. [ 2.776448] Report any missing HW support to [email protected]
  308. [ 2.789673] ide0: BM-DMA at 0xc000-0xc007
  309. [ 2.794134] ide1: BM-DMA at 0xc008-0xc00f
  310. [ 3.067791] hda: CF Card, CFA DISK drive
  311. [ 3.383903] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
  312. [ 3.392116] hda: UDMA/33 mode selected
  313. [ 4.080800] hdc: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
  314. [ 4.866598] hdd: CRW9624, ATAPI CD/DVD-ROM drive
  315. [ 4.871692] hdc: UDMA/66 mode selected
  316. [ 4.875926] hdd: MWDMA1 mode selected
  317. [ 4.880055] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  318. [ 4.884889] ide1 at 0x170-0x177,0x376 on irq 15
  319. [ 4.891563] PCI Interrupt Link [LNKA] enabled at IRQ 11
  320. [ 4.897494] siimage 0000:00:0c.0: IDE controller (0x1095:0x0680 rev 0x02)
  321. [ 4.904515] siimage 0000:00:0c.0: BASE CLOCK == 133
  322. [ 4.909499] siimage 0000:00:0c.0: 100% native mode on irq 11
  323. [ 4.915257] legacy IDE will be removed in 2021, please switch to libata
  324. [ 4.915257] Report any missing HW support to [email protected]
  325. [ 4.928483] ide2: MMIO-DMA
  326. [ 4.931645] ide3: MMIO-DMA
  327. [ 5.992812] ide2 at 0xe080f080-0xe080f087,0xe080f08a on irq 11
  328. [ 5.998971] ide3 at 0xe080f0c0-0xe080f0c7,0xe080f0ca on irq 11
  329. [ 6.011099] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
  330. [ 6.023530] ide-gd driver 1.18
  331. [ 6.027276] hda: max request size: 128KiB
  332. [ 6.031486] hda: 1002960 sectors (513 MB) w/1KiB Cache, CHS=995/16/63
  333. [ 6.046336] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
  334. [ 6.047327] hda: task_no_data_intr: error=0x04 { DriveStatusError }
  335. [ 6.047327] hda: possibly failed opcode: 0xef
  336. [ 6.066651] hda: hda1
  337. [ 6.081342] Error: Driver 'pata_platform' is already registered, aborting...
  338. [ 6.090973] e100: Intel(R) PRO/100 Network Driver
  339. [ 6.095852] e100: Copyright(c) 1999-2006 Intel Corporation
  340. [ 6.101964] e1000: Intel(R) PRO/1000 Network Driver
  341. [ 6.107007] e1000: Copyright (c) 1999-2006 Intel Corporation.
  342. [ 6.113177] sky2: driver version 1.30
  343. [ 6.118166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  344. [ 6.124895] ehci-pci: EHCI PCI platform driver
  345. [ 6.130309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  346. [ 6.136949] ohci-pci: OHCI PCI platform driver
  347. [ 6.141690] uhci_hcd: USB Universal Host Controller Interface driver
  348. [ 6.148886] uhci_hcd 0000:00:07.2: UHCI Host Controller
  349. [ 6.154661] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
  350. [ 6.162436] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000c400
  351. [ 6.168510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12
  352. [ 6.176899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  353. [ 6.184228] usb usb1: Product: UHCI Host Controller
  354. [ 6.189200] usb usb1: Manufacturer: Linux 5.12.1-lupi uhci_hcd
  355. [ 6.195128] usb usb1: SerialNumber: 0000:00:07.2
  356. [ 6.200462] hub 1-0:1.0: USB hub found
  357. [ 6.204801] hub 1-0:1.0: 2 ports detected
  358. [ 6.210090] uhci_hcd 0000:00:07.3: UHCI Host Controller
  359. [ 6.216436] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
  360. [ 6.224277] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000c800
  361. [ 6.230355] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12
  362. [ 6.238760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  363. [ 6.246090] usb usb2: Product: UHCI Host Controller
  364. [ 6.251063] usb usb2: Manufacturer: Linux 5.12.1-lupi uhci_hcd
  365. [ 6.256988] usb usb2: SerialNumber: 0000:00:07.3
  366. [ 6.262340] hub 2-0:1.0: USB hub found
  367. [ 6.266666] hub 2-0:1.0: 2 ports detected
  368. [ 6.271859] usbcore: registered new interface driver usblp
  369. [ 6.278479] usbcore: registered new interface driver usb-storage
  370. [ 6.285150] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  371. [ 6.292112] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  372. [ 6.303415] serio: i8042 KBD port at 0x60,0x64 irq 1
  373. [ 6.309753] mousedev: PS/2 mouse device common for all mice
  374. [ 6.318464] rtc_cmos 00:02: registered as rtc0
  375. [ 6.325037] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram
  376. [ 6.333169] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: [email protected]
  377. [ 6.342472] intel_pstate: CPU model not supported
  378. [ 6.347736] hid: raw HID events driver (C) Jiri Kosina
  379. [ 6.356154] usbcore: registered new interface driver usbhid
  380. [ 6.361955] usbhid: USB HID core driver
  381. [ 6.368840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  382. [ 6.385169] Initializing XFRM netlink socket
  383. [ 6.390145] NET: Registered protocol family 10
  384. [ 6.395697] Segment Routing with IPv6
  385. [ 6.399793] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  386. [ 6.406786] NET: Registered protocol family 17
  387. [ 6.411980] Key type dns_resolver registered
  388. [ 6.417658] microcode: sig=0x686, pf=0x10, revision=0x8
  389. [ 6.423932] microcode: Microcode Update Driver: v2.2.
  390. [ 6.423950] IPI shorthand broadcast: enabled
  391. [ 6.434127] registered taskstats version 1
  392. [ 6.438397] Loading compiled-in X.509 certificates
  393. [ 6.443963] PM: Magic number: 5:982:502
  394. [ 6.448299] printk: console [netcon0] enabled
  395. [ 6.452776] netconsole: network logging started
  396. [ 6.457656] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  397. [ 6.469554] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  398. [ 6.476358] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  399. [ 6.485130] Unstable clock detected, switching default tracing clock to "global"
  400. [ 6.485130] If you want to keep using the local clock, then add:
  401. [ 6.485130] "trace_clock=local"
  402. [ 6.485130] on the kernel command line
  403. [ 6.505697] cfg80211: failed to load regulatory.db
  404. [ 6.511076] ALSA device list:
  405. [ 6.514246] No soundcards found.
  406. [ 6.517779] Warning: unable to open an initial console.
  407. [ 6.523160] Waiting 5 sec before mounting root device...
  408. [ 11.801608] md: Waiting for all devices to be available before autodetect
  409. [ 11.808510] md: If you don't use raid, use raid=noautodetect
  410. [ 11.814273] md: Autodetecting RAID arrays.
  411. [ 11.818463] md: autorun ...
  412. [ 11.821349] md: ... autorun DONE.
  413. [ 11.824847] VFS: Cannot open root device "PARTUUID=7e3d6793-01" or unknown-block(3,1): error -2
  414. [ 11.833653] Please append a correct "root=" boot option; here are the available partitions:
  415. [ 11.842116] 0300 501480 hda
  416. [ 11.842123] driver: ide-gd
  417. [ 11.848772] 0301 500456 hda1 7e3d6793-01
  418. [ 11.848778]
  419. [ 11.855338] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
  420. [ 11.856319] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.12.1-lupi #5
  421. [ 11.856319] Hardware name: VIA Technologies, Inc. VT82C694X/10, BIOS 6.00 PG 02/12/2001
  422. [ 11.856319] Call Trace:
  423. [ 11.856319] dump_stack+0x5f/0x78
  424. [ 11.856319] panic+0x9e/0x247
  425. [ 11.856319] mount_block_root+0x146/0x1b0
  426. [ 11.856319] mount_root+0xd1/0xe9
  427. [ 11.856319] prepare_namespace+0x116/0x141
  428. [ 11.856319] kernel_init_freeable+0x1a7/0x1b4
  429. [ 11.856319] ? rest_init+0x92/0x92
  430. [ 11.856319] kernel_init+0x8/0xde
  431. [ 11.856319] ret_from_fork+0x1c/0x28
  432. [ 11.856319] Kernel Offset: disabled
  433. [ 11.856319] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1) ]---
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!