SHARE
TWEET

Untitled

a guest Mar 17th, 2017 2,592 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # vmctl start alpine_amd64 -c -b /etc/firmware/vmm.bios -d /export/VMs/linux_amd64_5g.raw                                                  -i 1 -m 1024M
  2.  
  3. Connected to /dev/ttyp7 (speed 9600)
  4. Changing serial settings was 0/0 now 3/0
  5. SeaBIOS (version rel-1.10.0-25-g1415d46-dirty-20170316_003724-miskatonic.azathoth.net)
  6. BUILD: gcc: (GCC) 4.2.1 20070719  binutils: mixed
  7. enabling shadow ram
  8. Unable to unlock ram - bridge not found
  9. RamSize: 0x41000000 [cmos]
  10. malloc preinit
  11. malloc init
  12. init ivt
  13. init bda
  14. init bios32
  15. init PNPBIOS table
  16. init keyboard
  17. init pic
  18. math cp init
  19. pci setup
  20. === PCI bus & bridge init ===
  21. PCI: pci_bios_init_bus_rec bus = 0x0
  22. === PCI device probing ===
  23. PCI probe
  24. Found 5 PCI devices (max PCI bus is 00)
  25. === PCI new allocation pass #1 ===
  26. PCI: check devices
  27. === PCI new allocation pass #2 ===
  28. PCI: IO: 1000 - 4fff
  29. PCI: 32: 0000000041000000 - 00000000fec00000
  30. PCI: map device bdf=00:01.0  bar 0, addr 00001000, size 00001000 [io]
  31. PCI: map device bdf=00:02.0  bar 0, addr 00002000, size 00001000 [io]
  32.           +----------------------------------------------------------+
  33.           |                  Alpine/Linux Boot Menu                  |
  34.           +----------------------------------------------------------+
  35.           | Linux vanilla                                            |
  36.           |                                                          |
  37.           |                                                          |
  38.           |                                                          |
  39.           |                                                          |
  40.           |                                                          |
  41.           |                                                          |
  42.           |                                                          |
  43.           |                                                          |
  44.           |                                                          |
  45.           |                                                          |
  46.           |                                                          |
  47.           +----------------------------------------------------------+
  48.  
  49. > .linux vmlinuz root=UUID=5d1bc5ad-1ab3-44ad-926f-0cabf3aa527b modules=sd-mod,usb-storage,ext4 console=ttyS0,115200 noapic initrd=initramfs-vanilla
  50.  
  51.  
  52. Loading vmlinuz... ok
  53. Loading initramfs-vanilla...ok
  54. enter handle_12:
  55.    a=00000000  b=00000000  c=00000000  d=00000000 ds=0000 es=0000 ss=0000
  56.   si=00000000 di=00000000 bp=00000000 sp=00007b0e cs=0000 ip=8c2f  f=0000
  57. invalid handle_legacy_disk:729:
  58.    a=00000000  b=00000000  c=00000000  d=00000000 ds=0000 es=0000 ss=0000
  59.   si=00000000 di=00000000 bp=00000000 sp=00007b0e cs=0000 ip=8c2f  f=0000
  60. unimplemented handle_15XX:330:
  61.    a=0000ec00  b=00000002  c=00000000  d=00000000 ds=1000 es=1000 ss=1000
  62.   si=00000000 di=00000000 bp=00000000 sp=0000ff44 cs=1000 ip=02fc  f=0003
  63. unimplemented handle_16XX:224:
  64.    a=00000305  b=00000000  c=00000000  d=00000000 ds=1000 es=1000 ss=1000
  65.   si=00000000 di=00000000 bp=00000000 sp=0000ff44 cs=1000 ip=02fc  f=0003
  66. unimplemented handle_15XX:330:
  67.    a=0000e980  b=00000000  c=00000000  d=47534943 ds=1000 es=1000 ss=1000
  68.   si=00000000 di=00000000 bp=00000000 sp=0000ff44 cs=1000 ip=02fc  f=0003
  69. [    0.000000] Initializing cgroup subsys cpuset
  70. [    0.000000] Initializing cgroup subsys cpu
  71. [    0.000000] Initializing cgroup subsys cpuacct
  72. [    0.000000] Linux version 4.4.52 (buildozer@build-3-5-x86_64) (gcc version 6.2.1 20160822 (Alpine 6.2.1) ) #1-Alpine SMP Tue Feb 28 10:35:47 GMT 2017
  73. [    0.000000] Command line: BOOT_IMAGE=vmlinuz root=UUID=5d1bc5ad-1ab3-44ad-926f-0cabf3aa527b modules=sd-mod,usb-storage,ext4 console=ttyS0,115200 noapic initrd=initramfs-vanilla
  74. [    0.000000] x86/fpu: Legacy x87 FPU detected.
  75. [    0.000000] x86/fpu: Using 'lazy' FPU context switches.
  76. [    0.000000] e820: BIOS-provided physical RAM map:
  77. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  78. [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  79. [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  80. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000040ffdfff] usable
  81. [    0.000000] BIOS-e820: [mem 0x0000000040ffe000-0x0000000040ffffff] reserved
  82. [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
  83. [    0.000000] NX (Execute Disable) protection: active
  84. [    0.000000] DMI not present or invalid.
  85. [    0.000000] e820: last_pfn = 0x40ffe max_arch_pfn = 0x400000000
  86. [    0.000000] MTRR: Disabled
  87. [    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
  88. [    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
  89. [    0.000000] RAMDISK: [mem 0x407b1000-0x40ffdfff]
  90. [    0.000000] ACPI: Early table checksum verification disabled
  91. [    0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20150930/tbxfroot-243)
  92. [    0.000000] Zone ranges:
  93. [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  94. [    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000040ffdfff]
  95. [    0.000000]   Normal   empty
  96. [    0.000000] Movable zone start for each node
  97. [    0.000000] Early memory node ranges
  98. [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
  99. [    0.000000]   node   0: [mem 0x0000000000100000-0x0000000040ffdfff]
  100. [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000040ffdfff]
  101. [    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
  102. [    0.000000] No local APIC present
  103. [    0.000000] APIC: disable apic facility
  104. [    0.000000] APIC: switched to apic NOOP
  105. [    0.000000] e820: [mem 0x41000000-0xfffbffff] available for PCI devices
  106. [    0.000000] Booting paravirtualized kernel on bare hardware
  107. [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
  108. [    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
  109. [    0.000000] PERCPU: Embedded 32 pages/cpu @ffff880040400000 s90712 r8192 d32168 u2097152
  110. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261959
  111. [    0.000000] Kernel command line: BOOT_IMAGE=vmlinuz root=UUID=5d1bc5ad-1ab3-44ad-926f-0cabf3aa527b modules=sd-mod,usb-storage,ext4 console=ttyS0,115200 noapic initrd=initramfs-vanilla
  112. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  113. [    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  114. [    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)[    0.000000] Memory: 1023080K/1064560K available (4173K kernel code, 631K rwdata, 2220K rodata, 1224K init, 576K bss, 41480K reserved, 0K cma-reserved)
  115. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  116. [    0.000000] Hierarchical RCU implementation.
  117. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  118. [    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
  119. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
  120. [    0.000000] kmemleak: Kernel memory leak detector disabled
  121. [    0.000000] NR_IRQS:4352 nr_irqs:32 16
  122. [    0.000000] ------------[ cut here ]------------
  123. [    0.000000] WARNING: CPU: 0 PID: 0 at /home/buildozer/aports/main/linux-vanilla/src/linux-4.4/arch/x86/kernel/rtc.c:92 mach_get_cmos_time+0xae/0x151()
  124. [    0.000000] Modules linked in:
  125. [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.52 #1-Alpine
  126. [    0.000000]  0000000000000000 c33b2830d44274e9 ffffffff8da03e18 ffffffff8d20280b
  127. [    0.000000]  0000000000000000 000000000000005c ffffffff8da03e50 ffffffff8d05a3f1
  128. [    0.000000]  ffffffff8d01b8c6 0000000000000000 ffffffff8da03ec8 ffffffff8db45919
  129. [    0.000000] Call Trace:
  130. [    0.000000]  [<ffffffff8d20280b>] dump_stack+0x61/0x7e
  131. [    0.000000]  [<ffffffff8d05a3f1>] warn_slowpath_common+0x99/0xb2
  132. [    0.000000]  [<ffffffff8d01b8c6>] ? mach_get_cmos_time+0xae/0x151
  133. [    0.000000]  [<ffffffff8d05a503>] warn_slowpath_null+0x1a/0x1c
  134. [    0.000000]  [<ffffffff8d01b8c6>] mach_get_cmos_time+0xae/0x151
  135. [    0.000000]  [<ffffffff8d01b99f>] read_persistent_clock+0xf/0x11
  136. [    0.000000]  [<ffffffff8d0aef1a>] read_persistent_clock64+0x29/0x53
  137. [    0.000000]  [<ffffffff8dad8ff6>] timekeeping_init+0x23/0x1c4
  138. [    0.000000]  [<ffffffff8d40d2ad>] ? mutex_unlock+0x5/0x1d
  139. [    0.000000]  [<ffffffff8d05a559>] ? cpu_maps_update_done+0x15/0x17
  140. [    0.000000]  [<ffffffff8d212b24>] ? find_next_bit+0x18/0x1a
  141. [    0.000000]  [<ffffffff8dab6de5>] start_kernel+0x2cd/0x46e
  142. [    0.000000]  [<ffffffff8dab6120>] ? early_idt_handler_array+0x120/0x120
  143. [    0.000000]  [<ffffffff8dab62e2>] x86_64_start_reservations+0x2a/0x2c
  144. [    0.000000]  [<ffffffff8dab6431>] x86_64_start_kernel+0x14d/0x170
  145. [    0.000000] ---[ end trace 4d5ff9f2f68c4233 ]---
  146. [    0.000000] Console: colour *CGA 80x25
  147. [    0.000000] console [ttyS0] enabled
  148. [    0.000000] Calibrating delay loop...
RAW Paste Data
Top