API tools faq
paste
rnayak

3430 SDP PM test log - 3.6-rc5-CCF

rnayak
Sep 14th, 2012
59
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.18 KB | None | 0 0
raw download clone embed print report
  1. OMAP34XX SDP # bootm 0x80300000
  2. ## Booting image at 80300000 ...
  3. Image Name: Linux-3.6.0-rc5-00034-ge185e40
  4. Image Type: ARM Linux Kernel Image (uncompressed)
  5. Data Size: 4076680 Bytes = 3.9 MB
  6. Load Address: 80008000
  7. Entry Point: 80008000
  8. Verifying Checksum ... OK
  9. OK
  10.  
  11. Starting kernel ...
  12.  
  13. Uncompressing Linux... done, booting the kernel.
  14. [ 0.000000] Booting Linux on physical CPU 0
  15. [ 0.000000] Linux version 3.6.0-rc5-00034-ge185e40 (a0131687@ula0131687) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #5 SMP Fri Se2
  16. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7d
  17. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  18. [ 0.000000] Machine: OMAP3430 3430SDP board
  19. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  20. [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
  21. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  22. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0f35000 s14016 r8192 d14656 u36864
  23. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
  24. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.24.190.99:/home/a0393217local/myfs/target ip=dhcp noip
  25. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  28. [ 0.000000] Memory: 255MB = 255MB total
  29. [ 0.000000] Memory: 245308k/245308k available, 16836k reserved, 0K highmem
  30. [ 0.000000] Virtual kernel memory layout:
  31. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  32. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  33. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  34. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  35. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  36. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  37. [ 0.000000] .text : 0xc0008000 - 0xc06e0768 (7010 kB)
  38. [ 0.000000] .init : 0xc06e1000 - 0xc07316c0 ( 322 kB)
  39. [ 0.000000] .data : 0xc0732000 - 0xc07d3fc0 ( 648 kB)
  40. [ 0.000000] .bss : 0xc07d3fe4 - 0xc0d2e68c (5482 kB)
  41. [ 0.000000] Hierarchical RCU implementation.
  42. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  43. [ 0.000000] NR_IRQS:474
  44. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  45. [ 0.000000] Total of 96 interrupts on 1 active controller
  46. [ 0.000000] omap_hwmod: mpu: missing clockdomain for arm_fck.
  47. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  48. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  49. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  50. [ 0.000000] Console: colour dummy device 80x30
  51. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  52. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  53. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  54. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  55. [ 0.000000] ... CLASSHASH_SIZE: 4096
  56. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  57. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  58. [ 0.000000] ... CHAINHASH_SIZE: 16384
  59. [ 0.000000] memory used by lock dependency info: 3695 kB
  60. [ 0.000000] per task-struct memory footprint: 1152 bytes
  61. [ 0.001129] Calibrating delay loop... 330.83 BogoMIPS (lpj=1290240)
  62. [ 0.109222] pid_max: default: 32768 minimum: 301
  63. [ 0.109985] Security Framework initialized
  64. [ 0.110198] Mount-cache hash table entries: 512
  65. [ 0.116668] CPU: Testing write buffer coherency: ok
  66. [ 0.117980] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  67. [ 0.118133] Setting up static identity map for 0x805042b8 - 0x80504328
  68. [ 0.121307] Brought up 1 CPUs
  69. [ 0.121337] SMP: Total of 1 processors activated (330.83 BogoMIPS).
  70. [ 0.144470] omap_hwmod: mcbsp2: cannot be enabled for reset (3)
  71. [ 0.154327] dummy:
  72. [ 0.157440] NET: Registered protocol family 16
  73. [ 0.159332] DMA: preallocated 256 KiB pool for atomic coherent allocations
  74. [ 0.160522] GPMC revision 5.0
  75. [ 0.160858] gpmc: irq-20 could not claim: err -22
  76. [ 0.175323] OMAP GPIO hardware version 2.5
  77. [ 0.195983] omap_mux_init: Add partition: #1: core, flags: 0
  78. [ 0.229339] Reprogramming SDRC clock to 332000000 Hz
  79. [ 0.234863] hw-breakpoint: debug architecture 0x4 unsupported.
  80. [ 0.255828] omap-mcbsp.2: alias fck already exists
  81. [ 0.256927] omap-mcbsp.3: alias fck already exists
  82. [ 0.263397] OMAP DMA hardware revision 4.0
  83. [ 0.356506] bio: create slab <bio-0> at 0
  84. [ 0.483917] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
  85. [ 0.492004] SCSI subsystem initialized
  86. [ 0.496063] usbcore: registered new interface driver usbfs
  87. [ 0.496856] usbcore: registered new interface driver hub
  88. [ 0.497985] usbcore: registered new device driver usb
  89. [ 0.516204] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
  90. [ 0.528076] twl 1-0048: PIH (irq 7) chaining IRQs 320..328
  91. [ 0.528930] twl 1-0048: power (irq 325) chaining IRQs 328..335
  92. [ 0.532592] twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
  93. [ 0.545806] vdd_mpu_iva: 600 <--> 1450 mV normal
  94. [ 0.549133] vdd_core: 600 <--> 1450 mV normal
  95. [ 0.552093] VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  96. [ 0.555877] VDAC: 1800 mV normal standby
  97. [ 0.559143] VAUX2_4030: 2800 mV normal standby
  98. [ 0.563293] VDVI: 1800 mV normal standby
  99. [ 0.566558] VMMC2: 1850 mV normal standby
  100. [ 0.569641] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  101. [ 0.573333] VAUX1: 2800 mV normal standby
  102. [ 0.576599] VAUX3: 2800 mV normal standby
  103. [ 0.580230] VAUX4: 1800 mV normal standby
  104. [ 0.594024] omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz
  105. [ 0.609527] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
  106. [ 0.621154] Switching to clocksource 32k_counter
  107. [ 0.803802] NET: Registered protocol family 2
  108. [ 0.806671] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  109. [ 0.807220] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
  110. [ 0.813201] TCP: Hash tables configured (established 8192 bind 8192)
  111. [ 0.813507] TCP: reno registered
  112. [ 0.813568] UDP hash table entries: 256 (order: 2, 20480 bytes)
  113. [ 0.813964] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  114. [ 0.815155] NET: Registered protocol family 1
  115. [ 0.816986] RPC: Registered named UNIX socket transport module.
  116. [ 0.817016] RPC: Registered udp transport module.
  117. [ 0.817321] RPC: Registered tcp transport module.
  118. [ 0.817352] RPC: Registered tcp NFSv4.1 backchannel transport module.
  119. [ 0.818847] NetWinder Floating Point Emulator V0.97 (double precision)
  120. [ 1.046386] VFS: Disk quotas dquot_6.5.2
  121. [ 1.046783] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  122. [ 1.050567] NFS: Registering the id_resolver key type
  123. [ 1.051300] Key type id_resolver registered
  124. [ 1.051361] Key type id_legacy registered
  125. [ 1.051910] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
  126. [ 1.052764] msgmni has been set to 479
  127. [ 1.057556] io scheduler noop registered
  128. [ 1.057586] io scheduler deadline registered
  129. [ 1.057708] io scheduler cfq registered (default)
  130. [ 1.061370] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  131. [ 1.070983] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  132. [ 1.745666] console [ttyO0] enabled
  133. [ 1.751983] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  134. [ 1.761535] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  135. [ 1.816284] brd: module loaded
  136. [ 1.846221] loop: module loaded
  137. [ 1.859985] mtdoops: mtd device (mtddev=name/number) must be supplied
  138. [ 1.867919] ONFI param page 0 valid
  139. [ 1.871612] ONFI flash detected
  140. [ 1.874999] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa1 (Micron MT29F1G08ABB), page size: 2048, OOB size: 64
  141. [ 1.885986] Creating 5 MTD partitions on "omap2-nand.0":
  142. [ 1.891632] 0x000000000000-0x000000080000 : "X-Loader-NAND"
  143. [ 1.907135] 0x000000080000-0x0000001c0000 : "U-Boot-NAND"
  144. [ 1.920318] 0x0000001c0000-0x000000280000 : "Boot Env-NAND"
  145. [ 1.933044] 0x000000280000-0x000000780000 : "Kernel-NAND"
  146. [ 1.948913] 0x000000780000-0x000008000000 : "File System - NAND"
  147. [ 2.068450] OneNAND driver initializing
  148. [ 2.073150] omap2-onenand omap2-onenand: initializing on CS2, phys base 0x20000000, virtual base d0900000, freq 0 MHz
  149. [ 2.084655] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
  150. [ 2.089691] OneNAND version = 0x002c
  151. [ 2.095581] Scanning device for bad blocks
  152. [ 2.103424] OneNAND eraseblock 51 is an initial bad block
  153. [ 2.111907] OneNAND eraseblock 97 is an initial bad block
  154. [ 2.122863] OneNAND eraseblock 183 is an initial bad block
  155. [ 2.133575] OneNAND eraseblock 266 is an initial bad block
  156. [ 2.172515] OneNAND eraseblock 822 is an initial bad block
  157. [ 2.194549] OneNAND eraseblock 1094 is an initial bad block
  158. [ 2.202087] OneNAND eraseblock 1122 is an initial bad block
  159. [ 2.249511] OneNAND eraseblock 1820 is an initial bad block
  160. [ 2.255584] OneNAND eraseblock 1823 is an initial bad block
  161. [ 2.264282] OneNAND eraseblock 1870 is an initial bad block
  162. [ 2.280700] Creating 5 MTD partitions on "omap2-onenand":
  163. [ 2.286437] 0x000000000000-0x000000080000 : "X-Loader-OneNAND"
  164. [ 2.298492] 0x000000080000-0x0000000c0000 : "U-Boot-OneNAND"
  165. [ 2.310699] 0x0000000c0000-0x0000000e0000 : "U-Boot Environment-OneNAND"
  166. [ 2.323577] 0x0000000e0000-0x0000002e0000 : "Kernel-OneNAND"
  167. [ 2.335754] 0x0000002e0000-0x000010000000 : "File System-OneNAND"
  168. [ 2.367950] omap-dma-engine omap-dma-engine: allocating channel for 36
  169. [ 2.375366] omap-dma-engine omap-dma-engine: allocating channel for 35
  170. [ 2.395660] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]>
  171. [ 2.407867] eth0: SMC91C94 (rev 9) at d085a300 IRQ 102 [nowait]
  172. [ 2.414611] eth0: Ethernet addr: 08:00:28:01:24:64
  173. [ 2.422546] usbcore: registered new interface driver asix
  174. [ 2.429229] usbcore: registered new interface driver cdc_ether
  175. [ 2.436401] usbcore: registered new interface driver smsc95xx
  176. [ 2.443267] usbcore: registered new interface driver net1080
  177. [ 2.450042] usbcore: registered new interface driver cdc_subset
  178. [ 2.456970] usbcore: registered new interface driver zaurus
  179. [ 2.463745] usbcore: registered new interface driver cdc_ncm
  180. [ 2.472869] usbcore: registered new interface driver cdc_wdm
  181. [ 2.479003] Initializing USB Mass Storage driver...
  182. [ 2.485015] usbcore: registered new interface driver usb-storage
  183. [ 2.491516] USB Mass Storage support registered.
  184. [ 2.498016] usbcore: registered new interface driver libusual
  185. [ 2.505004] usbcore: registered new interface driver usbtest
  186. [ 2.513275] mousedev: PS/2 mouse device common for all mice
  187. [ 2.522613] input: TWL4030 Keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
  188. [ 2.543304] ads7846 spi1.0: touchscreen, irq 98
  189. [ 2.551177] input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input1
  190. [ 2.568054] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2
  191. [ 2.581329] twl_rtc twl_rtc: Power up reset detected.
  192. [ 2.598449] twl_rtc twl_rtc: Enabling TWL-RTC
  193. [ 2.617279] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  194. [ 2.625640] i2c /dev entries driver
  195. [ 2.634429] Driver for 1-wire Dallas network protocol.
  196. [ 2.644378] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  197. [ 2.653533] twl4030_wdt twl4030_wdt: Failed to register misc device
  198. [ 2.660156] twl4030_wdt: probe of twl4030_wdt failed with error -16
  199. [ 2.667877] cpuidle: using governor ladder
  200. [ 2.672393] cpuidle: using governor menu
  201. [ 2.681030] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
  202. [ 2.687561] omap-dma-engine omap-dma-engine: allocating channel for 62
  203. [ 2.694549] omap-dma-engine omap-dma-engine: allocating channel for 61
  204. [ 2.858093] omap_hsmmc omap_hsmmc.1: Failed to get debounce clk
  205. [ 2.864501] omap-dma-engine omap-dma-engine: allocating channel for 48
  206. [ 2.871368] omap-dma-engine omap-dma-engine: allocating channel for 47
  207. [ 2.929931] usbcore: registered new interface driver usbhid
  208. [ 2.935913] usbhid: USB HID core driver
  209. [ 2.939941] oprofile: hardware counters not available
  210. [ 2.945312] oprofile: using timer interrupt.
  211. [ 2.950958] TCP: cubic registered
  212. [ 2.954437] Initializing XFRM netlink socket
  213. [ 2.959228] NET: Registered protocol family 17
  214. [ 2.964019] NET: Registered protocol family 15
  215. [ 2.969329] Key type dns_resolver registered
  216. [ 2.974090] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  217. [ 3.000122] ThumbEE CPU extension supported.
  218. [ 3.017486] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  219. [ 3.101104] eth0: link up
  220. [ 3.122070] Sending DHCP requests ., OK
  221. [ 4.294555] IP-Config: Got DHCP answer from 0.0.0.0, my address is 172.24.191.78
  222. [ 4.304626] IP-Config: Complete:
  223. [ 4.308044] device=eth0, addr=172.24.191.78, mask=255.255.252.0, gw=172.24.188.1
  224. [ 4.316345] host=172.24.191.78, domain=india.ti.com, nis-domain=(none)
  225. [ 4.323699] bootserver=0.0.0.0, rootserver=172.24.190.99, rootpath=
  226. [ 7.022125] VFS: Mounted root (nfs filesystem) on device 0:11.
  227. [ 7.029541] Freeing init memory: 320K
  228. ******************************************
  229. Starting System Init for 12.2
  230. Release: 12.2
  231. ******************************************
  232. Saving kernel ring buffer : OK
  233. /dev/ttyO0 linked to /dev/tty-bd - using as console
  234. Mounting devpts : OK
  235. Setting up networking
  236. Configuring lo : OK
  237. Configuring eth0 : OK - 172.24.191.78
  238. Starting telnetd : OK
  239. Starting syslogd : OK
  240. Starting klogd : OK
  241. Mounting filesystems : OK
  242. Checking warn dumps : OK
  243.  
  244. Please press Enter to activate this console.
  245. / # AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
  246. -/bin/sh: c1: not found
  247. / #
  248. -/bin/sh: AT: not found
  249. / #
  250. [1]+ Done(127) AT S7=45 S0=0 L1 V1 X4
  251. / # mount -t debugfs none /debug
  252. mount: mounting none on /debug failed: Device or resource busy
  253. / #
  254. / # cat /debug/pm_debug/count
  255. usbhost_pwrdm (ON),OFF:0,RET:1628,INA:0,ON:1629,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  256. sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  257. core_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
  258. per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  259. dss_pwrdm (ON),OFF:0,RET:1628,INA:0,ON:1629,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  260. cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  261. neon_pwrdm (ON),OFF:0,RET:1609,INA:19,ON:1629,RET-LOGIC-OFF:0
  262. mpu_pwrdm (ON),OFF:0,RET:1609,INA:19,ON:1629,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  263. iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
  264. usbhost_clkdm->usbhost_pwrdm (1)
  265. sgx_clkdm->sgx_pwrdm (0)
  266. per_clkdm->per_pwrdm (13)
  267. cam_clkdm->cam_pwrdm (0)
  268. dss_clkdm->dss_pwrdm (1)
  269. d2d_clkdm->core_pwrdm (0)
  270. iva2_clkdm->iva2_pwrdm (0)
  271. mpu_clkdm->mpu_pwrdm (0)
  272. core_l4_clkdm->core_pwrdm (20)
  273. core_l3_clkdm->core_pwrdm (1)
  274. neon_clkdm->neon_pwrdm (0)
  275. / # echo mem > /sys/power/state
  276. [ 533.007415] PM: Syncing filesystems ... done.
  277. [ 533.047515] Freezing user space processes ... (elapsed 0.02 seconds) done.
  278. [ 533.078704] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  279. [ 533.109405] Suspending console(s) (use no_console_suspend to debug)
  280. [ 533.155609] PM: suspend of devices complete after 33.203 msecs
  281. [ 533.160675] PM: late suspend of devices complete after 5.035 msecs
  282. [ 533.168365] PM: noirq suspend of devices complete after 7.629 msecs
  283. [ 533.168426] Disabling non-boot CPUs ...
  284. [ 533.724182] Successfully put all powerdomains to target state
  285. [ 533.728363] PM: noirq resume of devices complete after 3.936 msecs
  286. [ 533.733551] PM: early resume of devices complete after 3.448 msecs
  287. [ 533.750213] PM: resume of devices complete after 16.510 msecs
  288. [ 533.804962] Restarting tasks ... done.
  289. / # cat /debug/pm_debug/count
  290. usbhost_pwrdm (ON),OFF:0,RET:1787,INA:0,ON:1788,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  291. sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  292. core_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
  293. per_pwrdm (ON),OFF:0,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  294. dss_pwrdm (ON),OFF:0,RET:1787,INA:0,ON:1788,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  295. cam_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  296. neon_pwrdm (ON),OFF:0,RET:1766,INA:21,ON:1788,RET-LOGIC-OFF:0
  297. mpu_pwrdm (ON),OFF:0,RET:1766,INA:21,ON:1788,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  298. iva2_pwrdm (RET),OFF:0,RET:1,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
  299. usbhost_clkdm->usbhost_pwrdm (1)
  300. sgx_clkdm->sgx_pwrdm (0)
  301. per_clkdm->per_pwrdm (13)
  302. cam_clkdm->cam_pwrdm (0)
  303. dss_clkdm->dss_pwrdm (1)
  304. d2d_clkdm->core_pwrdm (0)
  305. iva2_clkdm->iva2_pwrdm (0)
  306. mpu_clkdm->mpu_pwrdm (0)
  307. core_l4_clkdm->core_pwrdm (20)
  308. core_l3_clkdm->core_pwrdm (1)
  309. neon_clkdm->neon_pwrdm (0)
  310. / # echo 1 > /debug/pm_debug/enable_off_mode
  311. / # echo mem > /sys/power/state
  312. [ 556.563079] PM: Syncing filesystems ... done.
  313. [ 557.564147] Freezing user space processes ... (elapsed 0.02 seconds) done.
  314. [ 557.594543] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  315. [ 557.625762] Suspending console(s) (use no_console_suspend to debug)
  316. [ 557.655059] PM: suspend of devices complete after 16.347 msecs
  317. [ 557.660034] PM: late suspend of devices complete after 4.941 msecs
  318. [ 557.667205] PM: noirq suspend of devices complete after 7.137 msecs
  319. [ 557.667205] Disabling non-boot CPUs ...
  320. [ 558.128234] Successfully put all powerdomains to target state
  321. [ 558.132873] PM: noirq resume of devices complete after 4.270 msecs
  322. [ 558.137939] PM: early resume of devices complete after 3.355 msecs
  323. [ 558.170379] PM: resume of devices complete after 32.317 msecs
  324. [ 558.224945] Restarting tasks ... done.
  325. / #
  326. / # cat /debug/pm_debug/count
  327. usbhost_pwrdm (ON),OFF:38,RET:1916,INA:0,ON:1955,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  328. sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  329. core_pwrdm (ON),OFF:1,RET:1,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
  330. per_pwrdm (ON),OFF:1,RET:1,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  331. dss_pwrdm (ON),OFF:38,RET:1916,INA:0,ON:1955,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  332. cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  333. neon_pwrdm (ON),OFF:25,RET:1906,INA:23,ON:1955,RET-LOGIC-OFF:0
  334. mpu_pwrdm (ON),OFF:25,RET:1906,INA:23,ON:1955,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  335. iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
  336. usbhost_clkdm->usbhost_pwrdm (1)
  337. sgx_clkdm->sgx_pwrdm (0)
  338. per_clkdm->per_pwrdm (13)
  339. cam_clkdm->cam_pwrdm (0)
  340. dss_clkdm->dss_pwrdm (1)
  341. d2d_clkdm->core_pwrdm (0)
  342. iva2_clkdm->iva2_pwrdm (0)
  343. mpu_clkdm->mpu_pwrdm (0)
  344. core_l4_clkdm->core_pwrdm (20)
  345. core_l3_clkdm->core_pwrdm (1)
  346. neon_clkdm->neon_pwrdm (0)
  347. / #
  348. / # echo 3000 > /sys/devices/platform/omap_uart.0/power/autosuspend_delay_ms
  349. / # echo 3000 > /sys/devices/platform/omap_uart.1/power/autosuspend_delay_ms
  350. / # echo 3000 > /sys/devices/platform/omap_uart.2/power/autosuspend_delay_ms
  351. / # echo 3000 > /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms
  352. -/bin/sh: can't create /sys/devices/platform/omap_uart.3/power/autosuspend_delay_ms: nonexistent directory
  353. / #
  354. / #
  355. / # cat /debug/pm_debug/count
  356. usbhost_pwrdm (ON),OFF:372,RET:1916,INA:0,ON:2289,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  357. sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  358. core_pwrdm (ON),OFF:7,RET:3,INA:0,ON:11,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
  359. per_pwrdm (ON),OFF:9,RET:76,INA:0,ON:86,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  360. dss_pwrdm (ON),OFF:372,RET:1916,INA:0,ON:2289,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  361. cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  362. neon_pwrdm (ON),OFF:256,RET:1999,INA:33,ON:2289,RET-LOGIC-OFF:0
  363. mpu_pwrdm (ON),OFF:256,RET:1999,INA:33,ON:2289,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  364. iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
  365. usbhost_clkdm->usbhost_pwrdm (1)
  366. sgx_clkdm->sgx_pwrdm (0)
  367. per_clkdm->per_pwrdm (12)
  368. cam_clkdm->cam_pwrdm (0)
  369. dss_clkdm->dss_pwrdm (1)
  370. d2d_clkdm->core_pwrdm (0)
  371. iva2_clkdm->iva2_pwrdm (0)
  372. mpu_clkdm->mpu_pwrdm (0)
  373. core_l4_clkdm->core_pwrdm (19)
  374. core_l3_clkdm->core_pwrdm (1)
  375. neon_clkdm->neon_pwrdm (0)
  376. / #
  377. / # sleep 10
  378. / # cat /debug/pm_debug/count
  379. usbhost_pwrdm (ON),OFF:453,RET:1916,INA:0,ON:2370,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  380. sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  381. core_pwrdm (ON),OFF:14,RET:5,INA:2,ON:22,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
  382. per_pwrdm (ON),OFF:18,RET:148,INA:0,ON:167,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  383. dss_pwrdm (ON),OFF:453,RET:1916,INA:0,ON:2370,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  384. cam_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  385. neon_pwrdm (ON),OFF:294,RET:2042,INA:33,ON:2370,RET-LOGIC-OFF:0
  386. mpu_pwrdm (ON),OFF:294,RET:2042,INA:33,ON:2370,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  387. iva2_pwrdm (OFF),OFF:1,RET:1,INA:0,ON:2,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
  388. usbhost_clkdm->usbhost_pwrdm (1)
  389. sgx_clkdm->sgx_pwrdm (0)
  390. per_clkdm->per_pwrdm (12)
  391. cam_clkdm->cam_pwrdm (0)
  392. dss_clkdm->dss_pwrdm (1)
  393. d2d_clkdm->core_pwrdm (0)
  394. iva2_clkdm->iva2_pwrdm (0)
  395. mpu_clkdm->mpu_pwrdm (0)
  396. core_l4_clkdm->core_pwrdm (19)
  397. core_l3_clkdm->core_pwrdm (1)
  398. neon_clkdm->neon_pwrdm (0)
  399. / # echo 0 > /debug/pm_debug/enable_off_mode
  400. / # cat /debug/pm_debug/count
  401. usbhost_pwrdm (ON),OFF:535,RET:1931,INA:0,ON:2467,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  402. sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  403. core_pwrdm (ON),OFF:14,RET:5,INA:2,ON:22,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
  404. per_pwrdm (ON),OFF:18,RET:245,INA:0,ON:264,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  405. dss_pwrdm (ON),OFF:535,RET:1931,INA:0,ON:2467,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  406. cam_pwrdm (RET),OFF:1,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  407. neon_pwrdm (ON),OFF:333,RET:2098,INA:35,ON:2467,RET-LOGIC-OFF:0
  408. mpu_pwrdm (ON),OFF:333,RET:2098,INA:35,ON:2467,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  409. iva2_pwrdm (RET),OFF:1,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
  410. usbhost_clkdm->usbhost_pwrdm (1)
  411. sgx_clkdm->sgx_pwrdm (0)
  412. per_clkdm->per_pwrdm (12)
  413. cam_clkdm->cam_pwrdm (0)
  414. dss_clkdm->dss_pwrdm (1)
  415. d2d_clkdm->core_pwrdm (0)
  416. iva2_clkdm->iva2_pwrdm (0)
  417. mpu_clkdm->mpu_pwrdm (0)
  418. core_l4_clkdm->core_pwrdm (19)
  419. core_l3_clkdm->core_pwrdm (1)
  420. neon_clkdm->neon_pwrdm (0)
  421. / # leep 10
  422. -/bin/sh: leep: not found
  423. / # sleep 10
  424. / # cat /debug/pm_debug/count
  425. usbhost_pwrdm (ON),OFF:535,RET:2085,INA:0,ON:2621,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  426. sgx_pwrdm (OFF),OFF:1,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  427. core_pwrdm (ON),OFF:14,RET:17,INA:4,ON:36,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
  428. per_pwrdm (ON),OFF:18,RET:399,INA:0,ON:418,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  429. dss_pwrdm (ON),OFF:535,RET:2085,INA:0,ON:2621,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  430. cam_pwrdm (RET),OFF:1,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  431. neon_pwrdm (ON),OFF:333,RET:2250,INA:37,ON:2621,RET-LOGIC-OFF:0
  432. mpu_pwrdm (ON),OFF:333,RET:2250,INA:37,ON:2621,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
  433. iva2_pwrdm (RET),OFF:1,RET:2,INA:0,ON:3,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0,RET-MEMBANK3-OFF:0,RET-MEMBANK4-OFF:0
  434. usbhost_clkdm->usbhost_pwrdm (1)
  435. sgx_clkdm->sgx_pwrdm (0)
  436. per_clkdm->per_pwrdm (12)
  437. cam_clkdm->cam_pwrdm (0)
  438. dss_clkdm->dss_pwrdm (1)
  439. d2d_clkdm->core_pwrdm (0)
  440. iva2_clkdm->iva2_pwrdm (0)
  441. mpu_clkdm->mpu_pwrdm (0)
  442. core_l4_clkdm->core_pwrdm (19)
  443. core_l3_clkdm->core_pwrdm (1)
  444. neon_clkdm->neon_pwrdm (0)
  445. / #
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!