ajturner

pfSense Boot Log

Nov 12th, 2021
133
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.21 KB | None | 0 0
  1. Copyright (c) 1992-2021 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3. The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 12.2-STABLE plus-RELENG_21_05_2-n202579-3b8ea9b365a pfSense arm64
  6. FreeBSD clang version 10.0.1 ([email protected]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
  7. VT: init without driver.
  8. real memory = 3602857984 (3435 MB)
  9. avail memory = 3473035264 (3312 MB)
  10. Starting CPU 1 (1)
  11. FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  12. arc4random: no preloaded entropy cache
  13. random: entropy device external interface
  14. wlan: mac acl policy registered
  15. ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
  16. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
  17. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff00000021c7c0, 0) error 1
  18. ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
  19. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
  20. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff00000021c86c, 0) error 1
  21. ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
  22. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
  23. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff00000021c918, 0) error 1
  24. iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
  25. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
  26. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff00000021c9c4, 0) error 1
  27. iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
  28. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
  29. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff00000021ca70, 0) error 1
  30. iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
  31. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
  32. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff00000021cb1c, 0) error 1
  33. MAP 8000000 mode 2 pages 5
  34. MAP 7ffc6000 mode 2 pages 1
  35. MAP e7ff5000 mode 2 pages 1
  36. WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
  37. WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
  38. WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
  39. [ath_hal] loaded
  40. WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
  41. kbd0 at kbdmux0
  42. ofwbus0: <Open Firmware Device Tree>
  43. simplebus0: <Flattened device tree simple bus> on ofwbus0
  44. simplebus1: <Flattened device tree simple bus> on simplebus0
  45. simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
  46. simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
  47. psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
  48. gic0: <ARM Generic Interrupt Controller v3.0> mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 27 on simplebus1
  49. gpio0: <Armada 37x0 North Bridge GPIO Controller> mem 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on simple_mfd0
  50. gpiobus0: <OFW GPIO bus> on gpio0
  51. gpio1: <Armada 37x0 South Bridge GPIO Controller> mem 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
  52. gpiobus1: <OFW GPIO bus> on gpio1
  53. gpiomdio0: <GPIO MDIO Bus bit-banging driver> at pins 21,23 on gpiobus1
  54. gpiomdio0: MDC pin: 21, MDIO pin: 23
  55. generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
  56. Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000
  57. Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
  58. cpulist0: <Open Firmware CPU Group> on ofwbus0
  59. cpu0: <Open Firmware CPU> on cpulist0
  60. cpu1: <Open Firmware CPU> on cpulist0
  61. pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
  62. spi0: <Armada 37x0 SPI controller> mem 0x10600-0x10fff irq 6 on simplebus1
  63. iichb0: <Marvell Armada 37x0 IIC controller> mem 0x11000-0x11023 irq 7 on simplebus1
  64. iicbus0: <OFW I2C bus> on iichb0
  65. iic0: <I2C generic I/O> on iicbus0
  66. iichb1: <Marvell Armada 37x0 IIC controller> mem 0x11080-0x110a3 irq 8 on simplebus1
  67. iicbus1: <OFW I2C bus> on iichb1
  68. iic1: <I2C generic I/O> on iicbus1
  69. nxprtc0: <NXP PCF8563 RTC> at addr 0xa2 on iicbus1
  70. gpio2: <ISSI IS31FL3199 9 channel light effect LED driver> at addr 0xce on iicbus1
  71. gpiobus2: <OFW GPIO bus> on gpio2
  72. gpioc2: <GPIO controller> on gpio2
  73. uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on simplebus1
  74. uart0: console (115200,n,8,1)
  75. gpioc0: <GPIO controller> on gpio0
  76. syscon_generic_dev0: <syscon> mem 0x14000-0x1405f on simplebus1
  77. gpioc1: <GPIO controller> on gpio1
  78. mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
  79. mvneta0: version is 10
  80. mvneta0: Ethernet address: 90:ec:77:14:74:9b
  81. miibus0: <MII bus> on gpiomdio0
  82. mv88e151x0: <Marvell 88E1512 Gigabit PHY> PHY 1 on miibus0
  83. mv88e151x0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseSX, 1000baseSX-FDX, auto
  84. mvneta1: <NETA controller> mem 0x40000-0x43fff irq 15 on simplebus1
  85. mvneta1: version is 10
  86. mvneta1: Ethernet address: 90:ec:77:14:74:9c
  87. mdio0: <MDIO> on mvneta1
  88. e6000sw0: <Marvell 88E6141> on mdio0
  89. e6000sw0: single-chip addressing mode
  90. e6000sw0: PHY at port 1
  91. miibus1: <MII bus> on e6000sw0
  92. e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus1
  93. e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  94. e6000sw0: PHY at port 2
  95. miibus2: <MII bus> on e6000sw0
  96. e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus2
  97. e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  98. e6000sw0: PHY at port 3
  99. miibus3: <MII bus> on e6000sw0
  100. e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus3
  101. e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  102. e6000sw0: PHY at port 4
  103. miibus4: <MII bus> on e6000sw0
  104. e1000phy3: <Marvell 88E1000 Gigabit PHY> PHY 20 on miibus4
  105. e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  106. e6000sw0: CPU port at 5
  107. e6000sw0: fixed port at 5
  108. e6000sw0: switch is ready.
  109. etherswitch0: <Switch controller> on e6000sw0
  110. xhci0: <Marvell Integrated USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on simplebus1
  111. xhci0: 32 bytes context size, 32-bit DMA
  112. usbus0 on xhci0
  113. ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5ffff irq 17 on simplebus1
  114. usbus1: EHCI version 1.0
  115. usbus1 on ehci0
  116. sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd8000-0xd82ff,0x17808-0x1780b irq 25 on simplebus1
  117. mmc0: <MMC/SD bus> on sdhci_xenon0
  118. ahci0: <AHCI SATA controller> mem 0xe0000-0xe1fff irq 26 on simplebus1
  119. ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
  120. ahcich0: <AHCI channel> at channel 0 on ahci0
  121. pcib0: <Marvell Armada 3700 PCIe Bus Controller> mem 0xd0070000-0xd008ffff irq 5 on simplebus0
  122. pcib0: link never came up
  123. pci0: <PCI bus> on pcib0
  124. cryptosoft0: <software crypto>
  125. armv8crypto0: <AES-CBC>
  126. Timecounters tick every 1.000 msec
  127. mvneta1: link state changed to UP
  128. spibus0: <OFW SPI bus> on spi0
  129. mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
  130. mx25l0: device type w25q32, size 4096K in 64 sectors of 64K, erase size 4K
  131. nxprtc0: registered as a time-of-day clock, resolution 0.015625s
  132. e6000sw0port1: link state changed to DOWN
  133. e6000sw0port2: link state changed to DOWN
  134. e6000sw0port3: link state changed to DOWN
  135. e6000sw0port4: link state changed to DOWN
  136. usbus0: 5.0Gbps Super Speed USB v3.0
  137. usbus1: 480Mbps High Speed USB v2.0
  138. ugen0.1: <Marvell XHCI root HUB> at usbus0
  139. uhub0: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
  140. ugen1.1: <Marvell EHCI root HUB> at usbus1
  141. uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
  142. mmc0: Failed to set VCCQ for card at relative address 2
  143. mmcsd0: 8GB <MMCHC DG4008 0.1 SN 5F570B14 MFG 04/2020 by 69 0x0000> at mmc0 50.0MHz/8bit/65535-block
  144. mmcsd0boot0: 4MB partition 1 at mmcsd0
  145. mmcsd0boot1: 4MB partition 2 at mmcsd0
  146. mmcsd0rpmb: 4MB partition 3 at mmcsd0
  147. Release APs...arc4random: no preloaded entropy cache
  148. done
  149. Trying to mount root from ufs:/dev/diskid/DISK-4AC907190EFB00000072s3 [rw,noatime]...
  150. CPU 0: ARM Cortex-A53 r0p4 affinity: 0
  151. Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
  152. Instruction Set Attributes 1 = <>
  153. Processor Features 0 = <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
  154. Processor Features 1 = <0>
  155. Memory Model Features 0 = <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,1TB PA>
  156. Memory Model Features 1 = <>
  157. Memory Model Features 2 = <32b CCIDX,48b VA>
  158. Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
  159. Debug Features 1 = <0>
  160. Auxiliary Features 0 = <0>
  161. Auxiliary Features 1 = <0>
  162. CPU 1: ARM Cortex-A53 r0p4 affinity: 1
  163. uhub0: 2 ports with 2 removable, self powered
  164. Root mount waiting for: usbus1 CAM
  165. uhub1: 1 port with 1 removable, self powered
  166. e6000sw0port1: link state changed to UP
  167. Root mount waiting for: CAM
  168. Root mount waiting for: CAM
  169. Root mount waiting for: CAM
  170. Root mount waiting for: CAM
  171. Root mount waiting for: CAM
  172. Root mount waiting for: CAM
  173. Root mount waiting for: CAM
  174. Root mount waiting for: CAM
  175. Root mount waiting for: CAM
  176. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
  177. ada0: <ATP SATA III M.2 2242 SBFMB1.1> ACS-4 ATA SATA 3.x device
  178. ada0: Serial Number 4AC907190EFB00000072
  179. ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
  180. ada0: Command Queueing enabled
  181. ada0: 30533MB (62533296 512 byte sectors)
  182. mountroot: waiting for device /dev/diskid/DISK-4AC907190EFB00000072s3...
  183. WARNING: / was not properly dismounted
  184. WARNING: /: mount pending error: blocks 208 files 1
  185. random: unblocking device.
Advertisement
Add Comment
Please, Sign In to add comment