U-Boot SPL 2022.10 (Nov 13 2022 - 11:56:04 +0100)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.7(release):10.0.0-3959-g71c7e79bfa-dirty
NOTICE:  BL31: Built : 11:55:26, Nov 13 2022
NOTICE:  BL31: Detected Allwinner H6 SoC (1728)
NOTICE:  BL31: Found U-Boot DTB at 0xa06fc90, model: Tanix TX6


U-Boot 2022.10 (Nov 13 2022 - 11:56:04 +0100) Allwinner Technology

CPU:   Allwinner H6 (SUN50I)
Model: Tanix TX6
DRAM:  3 GiB
Core:  55 devices, 16 uclasses, devicetree: separate
WDT:   Not starting watchdog@7020400
MMC:   mmc@4020000: 0, mmc@4021000: 2, mmc@4022000: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
1:      LibreELEC
Retrieving file: /KERNEL
append: boot=UUID=1311-5112 disk=UUID=118e910e-22c9-4749-adb0-8858932f771b quiet                                                                                                                                                              console=ttyS0,115200 console=tty1
Retrieving file: /sun50i-h6-tanix-tx6.dtb
Moving Image from 0x40080000 to 0x40200000, end=41810000
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Device Tree to 0000000049ff5000, end 0000000049fffcd5 ... OK

Starting kernel ...

[    0.030163] thermal_sys: Failed to find 'trips' node
[   20.761439] reboot: Restarting system

U-Boot SPL 2022.10 (Nov 13 2022 - 11:56:04 +0100)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.7(release):10.0.0-3959-g71c7e79bfa-dirty
NOTICE:  BL31: Built : 11:55:26, Nov 13 2022
NOTICE:  BL31: Detected Allwinner H6 SoC (1728)
NOTICE:  BL31: Found U-Boot DTB at 0xa06fc90, model: Tanix TX6


U-Boot 2022.10 (Nov 13 2022 - 11:56:04 +0100) Allwinner Technology

CPU:   Allwinner H6 (SUN50I)
Model: Tanix TX6
DRAM:  3 GiB
Core:  55 devices, 16 uclasses, devicetree: separate
WDT:   Not starting watchdog@7020400
MMC:   mmc@4020000: 0, mmc@4021000: 2, mmc@4022000: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
1:      LibreELEC
Retrieving file: /KERNEL
append: boot=UUID=1311-5112 disk=UUID=118e910e-22c9-4749-adb0-8858932f771b quiet console=ttyS0,115200 console=tty1
Retrieving file: /sun50i-h6-tanix-tx6.dtb
Moving Image from 0x40080000 to 0x40200000, end=41810000
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Device Tree to 0000000049ff5000, end 0000000049fffcd5 ... OK

Starting kernel ...

[    0.028969] thermal_sys: Failed to find 'trips' node
[  278.884214] systemd-shutdown[1]: Failed to set timeout to 10min: Invalid argument
[  278.979134] [1734]: Failed to unmount /flash: Device or resource busy
[  278.996435] systemd-shutdown[1]: Failed to finalize file systems, loop devices, ignoring.
[  279.046271] reboot: Restarting system

U-Boot SPL 2022.10 (Nov 13 2022 - 11:56:04 +0100)
DRAM:
U-Boot SPL 2022.10 (Nov 13 2022 - 11:56:04 +0100)
DRAM:
U-Boot SPL 2022.10 (Nov 13 2022 - 11:56:04 +0100)
DRAM: 4096 MiB

U-Boot SPL 2022.10 (Nov 13 2022 - 11:56:04 +0100)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.7(release):10.0.0-3959-g71c7e79bfa-dirty
NOTICE:  BL31: Built : 11:55:26, Nov 13 2022
NOTICE:  BL31: Detected Allwinner H6 SoC (1728)
NOTICE:  BL31: Found U-Boot DTB at 0xa06fc90, model: Tanix TX6


U-Boot 2022.10 (Nov 13 2022 - 11:56:04 +0100) Allwinner Technology

CPU:   Allwinner H6 (SUN50I)
Model: Tanix TX6
DRAM:  3 GiB

------> accidentally power disconnected, probably would have started




U-Boot SPL 2022.10 (Nov 13 2022 - 11:56:04 +0100)
DRAM: 8192 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.7(release):10.0.0-3959-g71c7e79bfa-dirty
NOTICE:  BL31: Built : 11:55:26, Nov 13 2022
NOTICE:  BL31: Detected Allwinner H6 SoC (1728)
NOTICE:  BL31: Found U-Boot DTB at 0xa06fc90, model: Tanix TX6


U-Boot 2022.10 (Nov 13 2022 - 11:56:04 +0100) Allwinner Technology

CPU:   Allwinner H6 (SUN50I)
Model: Tanix TX6
DRAM:  3 GiB
Core:  55 devices, 16 uclasses, devicetree: separate
WDT:   Not starting watchdog@7020400
MMC:   mmc@4020000: 0, mmc@4021000: 2, mmc@4022000: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
1:      LibreELEC
Retrieving file: /KERNEL
append: boot=UUID=1311-5112 disk=UUID=118e910e-22c9-4749-adb0-8858932f771b quiet console=ttyS0,115200 console=tty1
Retrieving file: /sun50i-h6-tanix-tx6.dtb
Moving Image from 0x40080000 to 0x40200000, end=41810000
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Device Tree to 0000000049ff5000, end 0000000049fffcd5 ... OK

Starting kernel ...

[    0.028960] thermal_sys: Failed to find 'trips' node