API tools faq
paste
Buadhai

Pi4 dmesg 20200625044109

Buadhai
Jun 24th, 2020
144
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.91 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.19.118-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 SMP Mon Apr 27 14:26:42 BST 2020
  3. [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  4. [ 0.000000] CPU: div instructions available: patching division code
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
  7. [ 0.000000] Memory policy: Data cache writealloc
  8. [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
  9. [ 0.000000] On node 0 totalpages: 1012736
  10. [ 0.000000] DMA zone: 1728 pages used for memmap
  11. [ 0.000000] DMA zone: 0 pages reserved
  12. [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
  13. [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63
  14. [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
  15. [ 0.000000] percpu: Embedded 17 pages/cpu s36928 r8192 d24512 u69632
  16. [ 0.000000] pcpu-alloc: s36928 r8192 d24512 u69632 alloc=17*4096
  17. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  18. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008
  19. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:90:64:F3 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=4fe57802-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  20. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [ 0.000000] Memory: 3735552K/4050944K available (8192K kernel code, 690K rwdata, 2420K rodata, 2048K init, 860K bss, 53248K reserved, 262144K cma-reserved, 3264512K highmem)
  23. [ 0.000000] Virtual kernel memory layout:
  24. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  25. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  26. vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  27. lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  28. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  29. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  30. .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
  31. .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
  32. .data : 0x(ptrval) - 0x(ptrval) ( 691 kB)
  33. .bss : 0x(ptrval) - 0x(ptrval) ( 861 kB)
  34. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  35. [ 0.000000] ftrace: allocating 28928 entries in 85 pages
  36. [ 0.000000] rcu: Hierarchical RCU implementation.
  37. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  38. [ 0.000000] GIC: Using split EOI/Deactivate mode
  39. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  40. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  41. [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  42. [ 0.000019] Switching to timer-based delay loop, resolution 18ns
  43. [ 0.000252] Console: colour dummy device 80x30
  44. [ 0.000278] console [tty1] enabled
  45. [ 0.000324] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
  46. [ 0.000341] pid_max: default: 32768 minimum: 301
  47. [ 0.000621] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  48. [ 0.000639] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. [ 0.001439] CPU: Testing write buffer coherency: ok
  50. [ 0.001880] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  51. [ 0.002545] Setting up static identity map for 0x200000 - 0x20003c
  52. [ 0.002708] rcu: Hierarchical SRCU implementation.
  53. [ 0.003584] smp: Bringing up secondary CPUs ...
  54. [ 0.004437] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  55. [ 0.005398] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  56. [ 0.006306] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  57. [ 0.006427] smp: Brought up 1 node, 4 CPUs
  58. [ 0.006440] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  59. [ 0.006450] CPU: All CPU(s) started in HYP mode.
  60. [ 0.006459] CPU: Virtualization extensions available.
  61. [ 0.007299] devtmpfs: initialized
  62. [ 0.018298] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  63. [ 0.018525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  64. [ 0.018545] futex hash table entries: 1024 (order: 4, 65536 bytes)
  65. [ 0.025991] pinctrl core: initialized pinctrl subsystem
  66. [ 0.026900] NET: Registered protocol family 16
  67. [ 0.030175] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  68. [ 0.031806] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  69. [ 0.031816] hw-breakpoint: maximum watchpoint size is 8 bytes.
  70. [ 0.032030] Serial: AMBA PL011 UART driver
  71. [ 0.035172] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  72. [ 0.050049] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-01 13:23, variant start
  73. [ 0.060064] raspberrypi-firmware soc:firmware: Firmware hash is 6379679d1ec6a8c746d7e77e015f5b56b939976f
  74. [ 0.103185] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  75. [ 0.106355] vgaarb: loaded
  76. [ 0.106741] SCSI subsystem initialized
  77. [ 0.106938] usbcore: registered new interface driver usbfs
  78. [ 0.106996] usbcore: registered new interface driver hub
  79. [ 0.107068] usbcore: registered new device driver usb
  80. [ 0.108531] clocksource: Switched to clocksource arch_sys_counter
  81. [ 0.187720] VFS: Disk quotas dquot_6.6.0
  82. [ 0.187803] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  83. [ 0.187955] FS-Cache: Loaded
  84. [ 0.188159] CacheFiles: Loaded
  85. [ 0.188830] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes, mapped to 0x(ptrval)
  86. [ 0.188845] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
  87. [ 0.200069] Console: switching to colour frame buffer device 240x67
  88. [ 0.210259] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered!
  89. [ 0.219461] NET: Registered protocol family 2
  90. [ 0.220128] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  91. [ 0.220155] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  92. [ 0.220221] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  93. [ 0.220295] TCP: Hash tables configured (established 8192 bind 8192)
  94. [ 0.220423] UDP hash table entries: 512 (order: 2, 16384 bytes)
  95. [ 0.220454] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  96. [ 0.220665] NET: Registered protocol family 1
  97. [ 0.221229] RPC: Registered named UNIX socket transport module.
  98. [ 0.221238] RPC: Registered udp transport module.
  99. [ 0.221248] RPC: Registered tcp transport module.
  100. [ 0.221258] RPC: Registered tcp NFSv4.1 backchannel transport module.
  101. [ 0.221272] PCI: CLS 0 bytes, default 64
  102. [ 0.223296] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  103. [ 0.225476] Initialise system trusted keyrings
  104. [ 0.225673] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  105. [ 0.234995] FS-Cache: Netfs 'nfs' registered for caching
  106. [ 0.235520] NFS: Registering the id_resolver key type
  107. [ 0.235545] Key type id_resolver registered
  108. [ 0.235555] Key type id_legacy registered
  109. [ 0.235580] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  110. [ 0.240234] Key type asymmetric registered
  111. [ 0.240246] Asymmetric key parser 'x509' registered
  112. [ 0.240355] bounce: pool size: 64 pages
  113. [ 0.240404] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  114. [ 0.240573] io scheduler noop registered
  115. [ 0.240586] io scheduler deadline registered (default)
  116. [ 0.240764] io scheduler cfq registered
  117. [ 0.240775] io scheduler mq-deadline registered (default)
  118. [ 0.240785] io scheduler kyber registered
  119. [ 0.274288] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
  120. [ 0.274309] brcm-pcie fd500000.pcie: could not get clock
  121. [ 0.274372] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  122. [ 0.274412] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
  123. [ 0.328567] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
  124. [ 0.328866] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  125. [ 0.328882] pci_bus 0000:00: root bus resource [bus 00-01]
  126. [ 0.328899] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  127. [ 0.328944] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  128. [ 0.329089] pci 0000:00:00.0: PME# supported from D0 D3hot
  129. [ 0.331857] PCI: bus0: Fast back to back transfers disabled
  130. [ 0.331874] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  131. [ 0.332087] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  132. [ 0.332212] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  133. [ 0.332530] pci 0000:01:00.0: PME# supported from D0 D3cold
  134. [ 0.335279] PCI: bus1: Fast back to back transfers disabled
  135. [ 0.335295] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
  136. [ 0.335343] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  137. [ 0.335362] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  138. [ 0.335433] pci 0000:00:00.0: PCI bridge to [bus 01]
  139. [ 0.335451] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  140. [ 0.335669] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
  141. [ 0.335849] pcieport 0000:00:00.0: Signaling PME with IRQ 52
  142. [ 0.336014] pcieport 0000:00:00.0: AER enabled with IRQ 52
  143. [ 0.336181] pci 0000:01:00.0: enabling device (0140 -> 0142)
  144. [ 0.340326] iproc-rng200 fe104000.rng: hwrng registered
  145. [ 0.340544] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  146. [ 0.341049] vc-sm: Videocore shared memory driver
  147. [ 0.341446] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  148. [ 0.351860] brd: module loaded
  149. [ 0.361875] loop: module loaded
  150. [ 0.362666] Loading iSCSI transport class v2.0-870.
  151. [ 0.364384] libphy: Fixed MDIO Bus: probed
  152. [ 0.364787] bcmgenet fd580000.genet: failed to get enet clock
  153. [ 0.364803] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
  154. [ 0.364819] bcmgenet fd580000.genet: failed to get enet-wol clock
  155. [ 0.364835] bcmgenet fd580000.genet: failed to get enet-eee clock
  156. [ 0.364858] bcmgenet: Skipping UMAC reset
  157. [ 0.365098] unimac-mdio unimac-mdio.-19: DMA mask not set
  158. [ 0.378559] libphy: bcmgenet MII bus: probed
  159. [ 0.419156] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
  160. [ 0.420111] usbcore: registered new interface driver r8152
  161. [ 0.420173] usbcore: registered new interface driver lan78xx
  162. [ 0.420235] usbcore: registered new interface driver smsc95xx
  163. [ 0.420575] xhci_hcd 0000:01:00.0: xHCI Host Controller
  164. [ 0.420606] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  165. [ 0.422850] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
  166. [ 0.423165] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 53
  167. [ 0.424033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  168. [ 0.424049] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  169. [ 0.424061] usb usb1: Product: xHCI Host Controller
  170. [ 0.424072] usb usb1: Manufacturer: Linux 4.19.118-v7l+ xhci-hcd
  171. [ 0.424083] usb usb1: SerialNumber: 0000:01:00.0
  172. [ 0.424626] hub 1-0:1.0: USB hub found
  173. [ 0.424708] hub 1-0:1.0: 1 port detected
  174. [ 0.425176] xhci_hcd 0000:01:00.0: xHCI Host Controller
  175. [ 0.425198] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  176. [ 0.425217] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  177. [ 0.425575] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  178. [ 0.425589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  179. [ 0.425601] usb usb2: Product: xHCI Host Controller
  180. [ 0.425612] usb usb2: Manufacturer: Linux 4.19.118-v7l+ xhci-hcd
  181. [ 0.425623] usb usb2: SerialNumber: 0000:01:00.0
  182. [ 0.426122] hub 2-0:1.0: USB hub found
  183. [ 0.426184] hub 2-0:1.0: 4 ports detected
  184. [ 0.427394] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  185. [ 0.427578] dwc_otg: FIQ enabled
  186. [ 0.427587] dwc_otg: NAK holdoff enabled
  187. [ 0.427596] dwc_otg: FIQ split-transaction FSM enabled
  188. [ 0.427608] Module dwc_common_port init
  189. [ 0.427834] usbcore: registered new interface driver uas
  190. [ 0.427931] usbcore: registered new interface driver usb-storage
  191. [ 0.428116] mousedev: PS/2 mouse device common for all mice
  192. [ 0.429333] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  193. [ 0.430979] sdhci: Secure Digital Host Controller Interface driver
  194. [ 0.430988] sdhci: Copyright(c) Pierre Ossman
  195. [ 0.431385] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  196. [ 0.431780] sdhci-pltfm: SDHCI platform and OF driver helper
  197. [ 0.434843] ledtrig-cpu: registered to indicate activity on CPUs
  198. [ 0.435010] hidraw: raw HID events driver (C) Jiri Kosina
  199. [ 0.435145] usbcore: registered new interface driver usbhid
  200. [ 0.435154] usbhid: USB HID core driver
  201. [ 0.435955] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  202. [ 0.437857] [vc_sm_connected_init]: start
  203. [ 0.447954] [vc_sm_connected_init]: end - returning 0
  204. [ 0.449130] Initializing XFRM netlink socket
  205. [ 0.449160] NET: Registered protocol family 17
  206. [ 0.449264] Key type dns_resolver registered
  207. [ 0.449754] Registering SWP/SWPB emulation handler
  208. [ 0.450387] registered taskstats version 1
  209. [ 0.450404] Loading compiled-in X.509 certificates
  210. [ 0.457429] uart-pl011 fe201000.serial: cts_event_workaround enabled
  211. [ 0.457497] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
  212. [ 0.462598] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  213. [ 0.463103] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
  214. [ 0.463747] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  215. [ 0.463759] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  216. [ 0.489115] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3
  217. [ 0.489194] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4
  218. [ 0.505490] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  219. [ 0.507110] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  220. [ 0.508740] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  221. [ 0.511643] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  222. [ 0.513264] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  223. [ 0.521253] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  224. [ 0.523579] of_cfs_init
  225. [ 0.523668] of_cfs_init: OK
  226. [ 0.524305] Waiting for root device PARTUUID=4fe57802-02...
  227. [ 0.570132] random: fast init done
  228. [ 0.620100] mmc1: new high speed SDIO card at address 0001
  229. [ 0.623668] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
  230. [ 0.624935] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  231. [ 0.627457] mmcblk0: p1 p2
  232. [ 0.642547] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  233. [ 0.642560] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  234. [ 0.788572] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  235. [ 0.971251] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  236. [ 0.971266] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  237. [ 0.971279] usb 1-1: Product: USB2.0 Hub
  238. [ 0.973155] hub 1-1:1.0: USB hub found
  239. [ 0.973543] hub 1-1:1.0: 4 ports detected
  240. [ 1.298574] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
  241. [ 1.350516] EXT4-fs (mmcblk0p2): recovery complete
  242. [ 1.352462] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  243. [ 1.352513] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  244. [ 1.353295] devtmpfs: mounted
  245. [ 1.360704] Freeing unused kernel memory: 2048K
  246. [ 1.360948] Run /sbin/init as init process
  247. [ 1.431584] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
  248. [ 1.431599] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  249. [ 1.431612] usb 1-1.3: Product: USB2.0 Hub
  250. [ 1.431623] usb 1-1.3: Manufacturer: GenesysLogic
  251. [ 1.433757] hub 1-1.3:1.0: USB hub found
  252. [ 1.434095] hub 1-1.3:1.0: 4 ports detected
  253. [ 1.748590] usb 1-1.3.1: new high-speed USB device number 4 using xhci_hcd
  254. [ 1.800987] systemd[1]: System time before build time, advancing clock.
  255. [ 1.889999] usb 1-1.3.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.02
  256. [ 1.890015] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  257. [ 1.890027] usb 1-1.3.1: Product: USB2.0 Hub
  258. [ 1.890039] usb 1-1.3.1: Manufacturer: GenesysLogic
  259. [ 1.893113] hub 1-1.3.1:1.0: USB hub found
  260. [ 1.894420] hub 1-1.3.1:1.0: 4 ports detected
  261. [ 1.895017] NET: Registered protocol family 10
  262. [ 1.896318] Segment Routing with IPv6
  263. [ 1.937258] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  264. [ 1.937950] systemd[1]: Detected architecture arm.
  265. [ 1.946689] systemd[1]: Set hostname to <raspsky>.
  266. [ 1.949637] systemd[1]: Hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0
  267. [ 1.949672] systemd[1]: Set hardware watchdog to 10s.
  268. [ 2.560341] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
  269. [ 2.601555] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
  270. [ 2.702280] random: systemd: uninitialized urandom read (16 bytes read)
  271. [ 2.718710] random: systemd: uninitialized urandom read (16 bytes read)
  272. [ 2.724184] systemd[1]: Listening on Syslog Socket.
  273. [ 2.724721] random: systemd: uninitialized urandom read (16 bytes read)
  274. [ 2.725026] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  275. [ 2.747991] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  276. [ 2.864218] i2c /dev entries driver
  277. [ 3.368510] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  278. [ 3.479169] systemd-journald[120]: Received request to flush runtime journal from PID 1
  279. [ 3.798609] usb 1-1.3.4: new high-speed USB device number 6 using xhci_hcd
  280. [ 4.002001] usb 1-1.3.4: New USB device found, idVendor=05a3, idProduct=9230, bcdDevice= 1.00
  281. [ 4.002020] usb 1-1.3.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
  282. [ 4.002034] usb 1-1.3.4: Product: USB 2.0 Camera
  283. [ 4.002046] usb 1-1.3.4: Manufacturer: HD Camera Manufacturer
  284. [ 4.065820] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
  285. [ 4.066835] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
  286. [ 4.067391] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
  287. [ 4.068062] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
  288. [ 4.095873] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  289. [ 4.097974] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  290. [ 4.097991] [vc_sm_connected_init]: start
  291. [ 4.106726] [vc_sm_connected_init]: installed successfully
  292. [ 4.133656] media: Linux media interface: v0.10
  293. [ 4.171300] videodev: Linux video capture interface: v2.00
  294. [ 4.221184] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  295. [ 4.247704] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  296. [ 4.262488] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  297. [ 4.262526] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  298. [ 4.279090] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  299. [ 4.284336] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  300. [ 4.284369] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  301. [ 4.292894] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  302. [ 4.292929] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  303. [ 4.295868] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  304. [ 4.350285] bcm2835_audio soc:audio: card created with 4 channels
  305. [ 4.352065] bcm2835_audio soc:audio: card created with 4 channels
  306. [ 4.543709] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
  307. [ 4.543729] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff)
  308. [ 4.543740] fb: switching to vc4drmfb from simple
  309. [ 4.544003] Console: switching to colour dummy device 80x30
  310. [ 4.545424] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
  311. [ 4.545438] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  312. [ 4.545447] [drm] No driver support for vblank timestamp query.
  313. [ 4.545458] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
  314. [ 4.547555] vc4-drm soc:gpu: HDMI-A-1: EDID is invalid:
  315. [ 4.547574] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  316. [ 4.547584] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  317. [ 4.547593] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  318. [ 4.547602] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  319. [ 4.547611] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  320. [ 4.547620] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  321. [ 4.547629] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  322. [ 4.547639] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  323. [ 4.662880] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  324. [ 4.689587] Console: switching to colour frame buffer device 240x67
  325. [ 4.728804] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
  326. [ 4.870010] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  327. [ 4.930717] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  328. [ 4.993023] brcmfmac: F1 signature read @0x18000000=0x15264345
  329. [ 5.007860] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  330. [ 5.008727] usbcore: registered new interface driver brcmfmac
  331. [ 5.158444] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05a3:9230)
  332. [ 5.220305] uvcvideo 1-1.3.4:1.0: Entity type for entity Extension 3 was not initialized!
  333. [ 5.220346] uvcvideo 1-1.3.4:1.0: Entity type for entity Processing 2 was not initialized!
  334. [ 5.220386] uvcvideo 1-1.3.4:1.0: Entity type for entity Camera 1 was not initialized!
  335. [ 5.221621] input: USB 2.0 Camera: HD USB Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/input/input0
  336. [ 5.222173] usbcore: registered new interface driver uvcvideo
  337. [ 5.222184] USB Video Class driver (1.1.1)
  338. [ 5.254835] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  339. [ 5.270493] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2
  340. [ 6.889365] random: crng init done
  341. [ 6.889380] random: 7 urandom warning(s) missed due to ratelimiting
  342. [ 7.113421] uart-pl011 fe201000.serial: no DMA platform data
  343. [ 7.225508] 8021q: 802.1Q VLAN Support v1.8
  344. [ 7.267662] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
  345. [ 7.554360] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  346. [ 7.554385] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
  347. [ 7.891966] bcmgenet: Skipping UMAC reset
  348. [ 7.989049] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
  349. [ 7.989531] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  350. [ 9.048715] bcmgenet fd580000.genet eth0: Link is Down
  351. [ 13.726053] Bluetooth: Core ver 2.22
  352. [ 13.726126] NET: Registered protocol family 31
  353. [ 13.726134] Bluetooth: HCI device and connection manager initialized
  354. [ 13.726154] Bluetooth: HCI socket layer initialized
  355. [ 13.726167] Bluetooth: L2CAP socket layer initialized
  356. [ 13.726203] Bluetooth: SCO socket layer initialized
  357. [ 13.739005] Bluetooth: HCI UART driver ver 2.3
  358. [ 13.739019] Bluetooth: HCI UART protocol H4 registered
  359. [ 13.739087] Bluetooth: HCI UART protocol Three-wire (H5) registered
  360. [ 13.739285] Bluetooth: HCI UART protocol Broadcom registered
  361. [ 13.776722] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  362. [ 13.912613] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  363. [ 13.912620] Bluetooth: BNEP filters: protocol multicast
  364. [ 13.912629] Bluetooth: BNEP socket layer initialized
  365. [ 13.953817] Bluetooth: RFCOMM TTY layer initialized
  366. [ 13.953835] Bluetooth: RFCOMM socket layer initialized
  367. [ 13.953850] Bluetooth: RFCOMM ver 1.11
  368. [ 23.940564] fuse init (API version 7.27)
  369. [16597.744670] usb 1-1.3.4: USB disconnect, device number 6
  370. [16598.794728] usb 1-1.3: USB disconnect, device number 3
  371. [16598.794747] usb 1-1.3.1: USB disconnect, device number 4
  372. [16605.564006] usb 1-1.3: new high-speed USB device number 7 using xhci_hcd
  373. [16605.766740] usb 1-1.3: New USB device found, idVendor=05a3, idProduct=9230, bcdDevice= 1.00
  374. [16605.766757] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
  375. [16605.766770] usb 1-1.3: Product: USB 2.0 Camera
  376. [16605.766783] usb 1-1.3: Manufacturer: HD Camera Manufacturer
  377. [16605.773593] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05a3:9230)
  378. [16605.828634] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
  379. [16605.828651] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
  380. [16605.828665] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
  381. [16605.829025] input: USB 2.0 Camera: HD USB Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
  382. [16609.224369] usb 1-1.3: USB disconnect, device number 7
  383. [16610.374050] usb 1-1.3: new high-speed USB device number 8 using xhci_hcd
  384. [16610.576936] usb 1-1.3: New USB device found, idVendor=05a3, idProduct=9230, bcdDevice= 1.00
  385. [16610.576952] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
  386. [16610.576965] usb 1-1.3: Product: USB 2.0 Camera
  387. [16610.576978] usb 1-1.3: Manufacturer: HD Camera Manufacturer
  388. [16610.583834] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05a3:9230)
  389. [16610.645208] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
  390. [16610.645225] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
  391. [16610.645240] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
  392. [16610.645590] input: USB 2.0 Camera: HD USB Camera as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
  393. [16658.304757] usb 1-1.3: reset high-speed USB device number 8 using xhci_hcd
  394. [16658.445110] usb 1-1.3: device descriptor read/all, error -71
  395. [16658.544657] usb 1-1.3: reset high-speed USB device number 8 using xhci_hcd
  396. [16683.315040] usb 1-1.3: reset high-speed USB device number 8 using xhci_hcd
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!