API tools faq
paste
Advertisement
Guest User

coilovers

a guest
Jun 22nd, 2017
56
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.07 KB | None | 0 0
raw download clone embed print report
  1. [2017-06-22 19:23:18] [Output] : ★ Ahmed Akbar runs over to the front left side of the car with the tape measurer pulled out measuring
  2. [2017-06-22 19:23:24] [Output] : ★ the same ride heigh ((Ahmed Akbar))
  3. [2017-06-22 19:23:31] [Output] : ★ Ahmed Akbar does this for the back right and left side.
  4. [2017-06-22 19:23:45] [Output] : ★ Ahmed Akbar uses a wrench edge to remove the hubcap.
  5. [2017-06-22 19:23:51] [Output] : ★ Ahmed Akbar now fits one end of the lug-nut wrench on to the lug nut and turns it counterclockwise.
  6. [2017-06-22 19:24:04] [Output] : ★ Ahmed Akbar whilst the wheel is in the air, removes the lug nuts and places them on a towel
  7. [2017-06-22 19:24:07] [Output] : ★ so they dont roll away ((Ahmed Akbar))
  8. [2017-06-22 19:24:12] [Output] : ★ Ahmed Akbar stumbles over to the other side and uses a broken wrench edge to remove the hubcap.
  9. [2017-06-22 19:24:42] [Output] : ★ Ahmed Akbar fits the lug nut wrench on to the lug nut and turns it counterclockwise with great force.
  10. [2017-06-22 19:24:48] [Output] : ★ Ahmed Akbar again removes the lug nuts and places them near the other lug nuts on the towel.
  11. [2017-06-22 19:24:53] [Output] : ★ Ahmed Akbar does this for the remaining 2 wheels.
  12. [2017-06-22 19:24:59] [Output] : ★ Ahmed Akbar removes the nuts/bolts that mount the lower bracket of the shock to the lower control arm.
  13. [2017-06-22 19:25:10] [Output] : ★ Ahmed Akbar Disconnects the sway bar end link to disconnect one end of the suspension from the other
  14. [2017-06-22 19:25:17] [Output] : ★ to avoid preload ((Ahmed Akbar))
  15. [2017-06-22 19:25:23] [Output] : ★ Ahmed Akbar loosens the nuts from the top of the engine bay to loosen the shock assembly from the vehicle.
  16. [2017-06-22 19:25:27] [Output] : ADVERT: @Big Moe's | Daily Goods, Electronics, Furniture, Autoparts, Security Needs & More | Location in Ad | RESTOCKED
  17. [2017-06-22 19:25:28] [Output] : ★ Ahmed Akbar carefully removes the shock assembly from the vehicle trying to avoid contact with any
  18. [2017-06-22 19:25:39] [Output] : ★ of the suspension or brake components; especially the brake fluid lines. ((Ahmed Akbar))
  19. [2017-06-22 19:25:48] [Output] : ★ Ahmed Akbar supports the suspension assembly as he removes the hardware.
  20. [2017-06-22 19:25:53] [Output] : ★ Ahmed Akbar now would set the height of the new coil overs.
  21. [2017-06-22 19:26:02] [Output] : ★ Ahmed Akbar makes sure the spring has no up and down movement within upper and lower locking spring perches
  22. [2017-06-22 19:26:19] [Output] : ★ Ahmed Akbar aims for zero preload on the spring meaning when there is no load present on the suspension
  23. [2017-06-22 19:26:26] [Output] : ★ Ahmed Akbar loosens the third/lower spring perch and rotate the shock body into the lower bracket
  24. [2017-06-22 19:26:34] [Output] : ★ Ahmed Akbar lifts the damper kit through the underside of the chassis into position where the studs go
  25. [2017-06-22 19:27:08] [Output] : ★ Ahmed Akbar using the OEM hardware,replaces the mounting hardware into the lower bracket and tightens them.
  26. [2017-06-22 19:27:21] [Output] : ★ Ahmed Akbar mounts all of the loose brake lines and or abs lines
  27. [2017-06-22 19:27:42] [Output] : ★ Ahmed Akbar torques the top nuts on the top of the damper assembly to oem torque specifications and then
  28. [2017-06-22 19:27:50] [Output] : ★ torques the lower hardware carefully. ((Ahmed Akbar))
  29. [2017-06-22 19:27:57] [Output] : ★ Ahmed Akbar Moves over to the other side of the car.
  30. [2017-06-22 19:28:01] [Output] : ★ Ahmed Akbar loosens the nuts from the top of the engine bay to loosen the shock assembly from the vehicle.
  31. [2017-06-22 19:28:47] [Output] : ★ Ahmed Akbar carefully removes shock assembly from the vehicle avoiding contact with any other components
  32. [2017-06-22 19:28:51] [Output] : ★ Ahmed Akbar supports the suspension assembly as he removes the hardware.
  33. [2017-06-22 19:28:57] [Output] : ★ Ahmed Akbar now grips the new coils and sets the height of the new coil-overs.
  34. [2017-06-22 19:29:06] [Output] : ★ Ahmed Akbar makes sure the spring has no up and down movement within upper and lower locking spring perches
  35. [2017-06-22 19:29:20] [Output] : ★ Ahmed Akbar loosens the third/lower spring perch and rotates the shock body into the lower bracket
  36. [2017-06-22 19:29:28] [Output] : ★ Ahmed Akbar lifts the damper kit through the underside of the chassis into position where the studs go
  37. [2017-06-22 19:29:38] [Output] : ★ Ahmed Akbar threads the nuts till you can see at least two threads past the top of the nut
  38. [2017-06-22 19:29:47] [Output] : ★ Ahmed Akbar using the oem hardware, replaces the lower mounting hardware into the lower bracket
  39. [2017-06-22 19:29:52] [Output] : ★ tighteing them hardly. ((Ahmed Akbar))
  40. [2017-06-22 19:29:59] [Output] : ★ Ahmed Akbar mounts all of the loose brake lines and/or abs lines
  41. [2017-06-22 19:30:17] [Output] : ★ Ahmed Akbar torques the top nuts on the top of the damper assembly to the oem torque specifications
  42. [2017-06-22 19:30:21] [Output] : ★ Ahmed Akbar stumbles over to the back of the vehicle and examines the rear shocks.
  43. [2017-06-22 19:30:31] [Output] : ★ Ahmed Akbar removes the single nut and bolt that is supporting the lower end of the shock/strut assembly
  44. [2017-06-22 19:31:20] [Output] : ★ Ahmed Akbar with the interior of the car removed to expose the upper suspension hardware
  45. [2017-06-22 19:31:27] [Output] : ★ carefully removes the two nuts holding up the shock/strut assembly. ((Ahmed Akbar))
  46. [2017-06-22 19:31:35] [Output] : ★ Ahmed Akbar removes the shock/strut assembly from the vehicle with the spring intact.
  47. [2017-06-22 19:31:40] [Output] : ★ Ahmed Akbar places the coil over damper kit in the same location as the oem suspension.
  48. [2017-06-22 19:32:08] [Output] : Screenshot taken: 'C:\Games1\MTa\screenshots\mta-screen_2017-06-22_19-32-08.png'
  49. [2017-06-22 19:32:16] [Output] : ★ Ahmed Akbar lifts the damper kit through the underside of the chassis into the position where the studs
  50. [2017-06-22 19:32:27] [Output] : ★ Ahmed Akbar threads the nuts till you can see at least two threads past the top of the nut
  51. [2017-06-22 19:32:37] [Output] : ★ Ahmed Akbar using the oem hardware, replaces the bolt, nut and any other hardware
  52. [2017-06-22 19:32:43] [Output] : ★ Ahmed Akbar torques the nuts on the top of the damper assembly to vehicle specifications
  53. [2017-06-22 19:32:59] [Output] : ★ Ahmed Akbar moves to the other side of the car to do the final coilover
  54. [2017-06-22 19:33:08] [Output] : ★ Ahmed Akbar Removes the single nut and bolt that is supporting the lower end of the shock/sturt assembly
  55. [2017-06-22 19:33:20] [Input] : me with the interior of the car removed to expose the upper suspension hardware,
  56. [2017-06-22 19:33:20] [Output] : ★ Ahmed Akbar with the interior of the car removed to expose the upper suspension hardware,
  57. [2017-06-22 19:33:27] [Input] : do carefully removes the two nuts holding up the shock
  58. [2017-06-22 19:33:27] [Output] : ★ carefully removes the two nuts holding up the shock ((Ahmed Akbar))
  59. [2017-06-22 19:33:32] [Input] : me Removes the shock/strut assembly from the vehicle with the spring intact.
  60. [2017-06-22 19:33:32] [Output] : ★ Ahmed Akbar Removes the shock/strut assembly from the vehicle with the spring intact.
  61. [2017-06-22 19:33:36] [Input] : me places the coil over damper kit in the same location as the oem suspension.
  62. [2017-06-22 19:33:36] [Output] : ★ Ahmed Akbar places the coil over damper kit in the same location as the oem suspension.
  63. [2017-06-22 19:33:41] [Input] : me lifts the damper kit through the underside of the chassis into position where the studs go
  64. [2017-06-22 19:33:41] [Output] : ★ Ahmed Akbar lifts the damper kit through the underside of the chassis into position where the studs go
  65. [2017-06-22 19:33:52] [Output] : ★ Ahmed Akbar using the oem hardware, replaces the bolt, nut and any other hardware
  66. [2017-06-22 19:34:43] [Output] : ★ Ahmed Akbar Picks up one of the wheels, matches the holes of the wheel with the stud bolts on
  67. [2017-06-22 19:34:47] [Output] : ADVERT: ✯ Quick Fix ✯ | We will do visual and mehanical upgrades for your car. Tints, Paintjobs, Wraps. | #658369
  68. [2017-06-22 19:34:51] [Output] : ★ car and sets the wheel on the studs. ((Ahmed Akbar))
  69. [2017-06-22 19:34:56] [Output] : ★ Ahmed Akbar starts putting on the lug nuts back on
  70. [2017-06-22 19:35:03] [Output] : ★ Ahmed Akbar stumbles over to the other side of the car with the other wheel in his hands.
  71. [2017-06-22 19:35:09] [Output] : ★ Ahmed Akbar matches the holes of the wheel with the stud bolts on the car and sets the wheel on the studs.
  72. [2017-06-22 19:35:14] [Output] : ★ Ahmed Akbar adds on the lug nuts and whilst doing this he checks each lug nut for tightness
  73. [2017-06-22 19:35:18] [Output] : ★ Ahmed Akbar repeats the same process on the other two wheels.
  74. [2017-06-22 19:35:27] [Output] : ADVERT: ✯ Quick Fix ✯ | We will do visual and mehanical upgrades for your car. Tints, Paintjobs, Wraps. | #552228
  75. [2017-06-22 19:35:42] [Output] : ★ Ahmed Akbar Lowers the car with hydraulic jack, the rest of the way until the vehicle is touching the ground
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!