Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu<6>[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct<5>[ 0.000000] [0: swapper: 0] Linux version 3.10.0 (wasser19641@gmail.com) (gcc version 4.9 20140514 (prerelease) (GCC) ) #2 SMP PREEMPT Tue Feb 23 09:12:56 CET 2016<4>[ 0.000000] [0: swapper: 0] CPU: AArch64 Processor [410fd033] revision 3<6>[ 0.000000] [0: swapper: 0] Machine: rockchip,rk3368<6>[ 0.000000] [0: swapper: 0] rockchip_uboot_logo_setup: mem: 0x0000000002000000@0x000000007dc00000, offset:0x0000000000000000<6>[ 0.000000] [0: swapper: 0] hdmi init vic is 16<4>[ 0.000000] [0: swapper: 0] cvbs init tve.format is -1<6>[ 0.000000] [0: swapper: 0] cvbs init tve.format is -1<6>[ 0.000000] [0: swapper: 0] rockchip_uboot_mem_reserve: reserve 0x0000000002000000@0x000000007dc00000 for uboot logo<4>[ 0.000000] [0: swapper: 0] rockchip_ion_reserve<6>[ 0.000000] [0: swapper: 0] ion heap(cma): base(0) size(0) align(0)<6>[ 0.000000] [0: swapper: 0] ion heap(vmalloc): base(0) size(0) align(0)<6>[ 0.000000] [0: swapper: 0] cma: CMA: reserved 16 MiB at 7cc00000<7>[ 0.000000] [0: swapper: 0] On node 0 totalpages: 523776<7>[ 0.000000] [0: swapper: 0] DMA zone: 7161 pages used for memmap<7>[ 0.000000] [0: swapper: 0] DMA zone: 0 pages reserved<7>[ 0.000000] [0: swapper: 0] DMA zone: 523776 pages, LIFO batch:31<6>[ 0.000000] [0: swapper: 0] psci: probing for conduit method from DT.<6>[ 0.000000] [0: swapper: 0] psci: PSCIv1.0 detected in firmware.<6>[ 0.000000] [0: swapper: 0] psci: Using standard PSCI v0.2 function IDs<6>[ 0.000000] [0: swapper: 0] PERCPU: Embedded 11 pages/cpu @ffffffc07fd12000 s13440 r8192 d23424 u45056<7>[ 0.000000] [0: swapper: 0] pcpu-alloc: s13440 r8192 d23424 u45056 alloc=11*4096<7>[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 <4>[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516615<5>[ 0.000000] [0: swapper: 0] Kernel command line: earlyprintk=uart8250-32bit,0xff690000 console=ttyS2 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x00008000@0x00010000(kernel),0x00010000@0x00018000(boot),0x00010000@0x00028000(recovery),0x00038000@0x00038000(backup),0x00040000@0x00070000(cache),0x00002000@0x000B0000(kpanic),0x00200000@0x000B2000(system),0x00008000@0x002B2000(metadata),0x00002000@0x002BA000(baseparamer),0x00020000@0x002BC000(radical_update),-@0x002DC000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2015-10-01_15:52:44 hdmi.vic=16 tve.format=-1<6>[ 0.000000] [0: swapper: 0] PID hash table entries: 4096 (order: 3, 32768 bytes)<6>[ 0.000000] [0: swapper: 0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)<6>[ 0.000000] [0: swapper: 0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)<6>[ 0.000000] [0: swapper: 0] Memory: 2046MB = 2046MB total<5>[ 0.000000] [0: swapper: 0] Memory: 1996752k/1996752k available, 98352k reserved<5>[ 0.000000] [0: swapper: 0] Virtual kernel memory layout:<5>[ 0.000000] [0: swapper: 0] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)<5>[ 0.000000] [0: swapper: 0] vmemmap : 0xffffffbc00007000 - 0xffffffbc01c00000 ( 27 MB)<5>[ 0.000000] [0: swapper: 0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)<5>[ 0.000000] [0: swapper: 0] memory : 0xffffffc000000000 - 0xffffffc07fe00000 ( 2046 MB)<5>[ 0.000000] [0: swapper: 0] .init : 0xffffffc000c40000 - 0xffffffc000c7c480 ( 242 kB)<5>[ 0.000000] [0: swapper: 0] .text : 0xffffffc000080000 - 0xffffffc000c3f814 ( 12031 kB)<5>[ 0.000000] [0: swapper: 0] .data : 0xffffffc000c7d000 - 0xffffffc000e16a40 ( 1639 kB)<6>[ 0.000000] [0: swapper: 0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1<6>[ 0.000000] [0: swapper/0: 0] Preemptible hierarchical RCU implementation.<6>[ 0.000000] [0: swapper/0: 0] RCU dyntick-idle grace-period acceleration is enabled.<6>[ 0.000000] [0: swapper/0: 0] NR_IRQS:64 nr_irqs:64 0<6>[ 0.000000] [0: swapper/0: 0] Architected cp15 timer(s) running at 24.00MHz (virt).<6>[ 1.309095] [0: swapper/0: 0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)<6>[ 1.309127] [0: swapper/0: 0] pid_max: default: 32768 minimum: 301<6>[ 1.309333] [0: swapper/0: 0] Security Framework initialized<6>[ 1.309414] [0: swapper/0: 0] Mount-cache hash table entries: 256<6>[ 1.310348] [0: swapper/0: 0] Initializing cgroup subsys debug<6>[ 1.310380] [0: swapper/0: 0] Initializing cgroup subsys freezer<3>[ 1.312323] [0: swapper/0: 1] /cpus/cpu@0: Missing clock-frequency property<3>[ 1.312387] [0: swapper/0: 1] /cpus/cpu@1: Missing clock-frequency property<3>[ 1.312449] [0: swapper/0: 1] /cpus/cpu@2: Missing clock-frequency property<3>[ 1.312512] [0: swapper/0: 1] /cpus/cpu@3: Missing clock-frequency property<3>[ 1.312576] [0: swapper/0: 1] /cpus/cpu@100: Missing clock-frequency property<3>[ 1.312641] [0: swapper/0: 1] /cpus/cpu@101: Missing clock-frequency property<3>[ 1.312708] [0: swapper/0: 1] /cpus/cpu@102: Missing clock-frequency property<3>[ 1.312776] [0: swapper/0: 1] /cpus/cpu@103: Missing clock-frequency property<6>[ 1.312806] [0: swapper/0: 1] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available<6>[ 1.314021] [0: swapper/0: 1] last_log: 0x000000007a480000 map to 0xffffff8000012000 and copy to 0xffffff8000094000, size 0x80000 early 0x18ec (version 3.1)<4>[ 1.387549] [1: swapper/1: 0] CPU1: Booted secondary processor<4>[ 1.407206] [2: swapper/2: 0] CPU2: Booted secondary processor<4>[ 1.426880] [3: swapper/3: 0] CPU3: Booted secondary processor<4>[ 1.446566] [4: swapper/4: 0] CPU4: Booted secondary processor<4>[ 1.466233] [5: swapper/5: 0] CPU5: Booted secondary processor<4>[ 1.485926] [6: swapper/6: 0] CPU6: Booted secondary processor<4>[ 1.505596] [7: swapper/7: 0] CPU7: Booted secondary processor<6>[ 1.505763] [0: swapper/0: 1] Brought up 8 CPUs<6>[ 1.505857] [0: swapper/0: 1] SMP: Total of 8 processors activated (384.00 BogoMIPS).<6>[ 1.507054] [0: swapper/0: 1] devtmpfs: initialized<6>[ 1.513852] [0: swapper/0: 1] sched: registering cpufreq notifiers for scale-invariant loads<6>[ 1.514124] [0: swapper/0: 1] pinctrl core: initialized pinctrl subsystem<6>[ 1.514469] [0: swapper/0: 1] regulator-dummy: no parameters<6>[ 1.530727] [0: swapper/0: 1] NET: Registered protocol family 16<6>[ 1.531991] [0: swapper/0: 1] ion_snapshot: 0x7a718000 map to 0xffffff8000115000 and copy to 0xffffffc000ee9028 (version 0.1)<6>[ 1.533155] [0: swapper/0: 1] vdso: 2 pages (1 code, 1 data) at base ffffffc000c85000<6>[ 1.533219] [0: swapper/0: 1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.<6>[ 1.534885] [0: swapper/0: 1] software IO TLB [mem 0x7a000000-0x7a400000] (4MB) mapped at [ffffffc079e00000-ffffffc07a1fffff]<6>[ 1.536545] [0: swapper/0: 1] DMA: preallocated 256 KiB pool for atomic allocations<4>[ 1.537517] [0: swapper/0: 1] rk_clk_tree_init start!<4>[ 1.566327] [0: swapper/0: 1] rk_get_uboot_display_flag: uboot_logo_on = 1<4>[ 1.566420] [0: swapper/0: 1] rkclk_init_clks: cnt_parent = 8<4>[ 1.566825] [0: swapper/0: 1] rkclk_init_clks: cnt_rate = 30<6>[ 1.573128] [0: swapper/0: 1] syscon ff610000.syscon: regmap [mem 0xff610000-0xff6103ff] registered<6>[ 1.573329] [0: swapper/0: 1] syscon ff730000.syscon: regmap [mem 0xff730000-0xff730fff] registered<6>[ 1.573549] [0: swapper/0: 1] syscon ff738000.syscon: regmap [mem 0xff738000-0xff738fff] registered<6>[ 1.573743] [0: swapper/0: 1] syscon ff740000.syscon: regmap [mem 0xff740000-0xff740fff] registered<6>[ 1.573962] [0: swapper/0: 1] syscon ff760000.syscon: regmap [mem 0xff760000-0xff760fff] registered<6>[ 1.574193] [0: swapper/0: 1] syscon ff770000.syscon: regmap [mem 0xff770000-0xff770fff] registered<6>[ 1.574385] [0: swapper/0: 1] syscon ffac0000.syscon: regmap [mem 0xffac0000-0xffac2fff] registered<6>[ 1.580676] [0: swapper/0: 1] rk_iommu ff900800.iep_mmu: (iep) Enter<6>[ 1.580794] [0: swapper/0: 1] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.<6>[ 1.580824] [0: swapper/0: 1] rk_iommu ff900800.iep_mmu: (iep) Initialized<6>[ 1.581013] [0: swapper/0: 1] rk_iommu ff950800.vip_mmu: (vip) Enter<6>[ 1.581094] [0: swapper/0: 1] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.<6>[ 1.581122] [0: swapper/0: 1] rk_iommu ff950800.vip_mmu: (vip) Initialized<6>[ 1.581301] [0: swapper/0: 1] rk_iommu ff930300.vop_mmu: (vop) Enter<6>[ 1.581386] [0: swapper/0: 1] rk_iommu ff930300.vop_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.<6>[ 1.581414] [0: swapper/0: 1] rk_iommu ff930300.vop_mmu: (vop) Initialized<6>[ 1.581610] [0: swapper/0: 1] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter<6>[ 1.581693] [0: swapper/0: 1] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.<6>[ 1.581721] [0: swapper/0: 1] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized<6>[ 1.582046] [0: swapper/0: 1] rk_iommu ff9a0440.hevc_mmu: (hevc) Enter<6>[ 1.582132] [0: swapper/0: 1] rk_iommu ff9a0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.<6>[ 1.582161] [0: swapper/0: 1] rk_iommu ff9a0440.hevc_mmu: (hevc) Initialized<6>[ 1.582376] [0: swapper/0: 1] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter<6>[ 1.582464] [0: swapper/0: 1] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.<6>[ 1.582492] [0: swapper/0: 1] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized<7>[ 1.584422] [0: swapper/0: 1] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0<7>[ 1.584508] [0: swapper/0: 1] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1<7>[ 1.584589] [0: swapper/0: 1] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2<7>[ 1.584673] [0: swapper/0: 1] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3<4>[ 1.592206] [0: swapper/0: 1] rockchip_pinctrl_probe:init ok<6>[ 1.594188] [0: swapper/0: 1] rk3368_pmupvtm_clk_init<3>[ 1.595220] [0: swapper/0: 1] need pvtm_div out of bounary! set max instead<6>[ 1.595247] [0: swapper/0: 1] process version: 0<6>[ 1.595324] [0: swapper/0: 1] channel:0, lkg:28<6>[ 1.595351] [0: swapper/0: 1] target-temp:80<6>[ 1.595397] [0: swapper/0: 1] channel:0, lkg:28<6>[ 1.595424] [0: swapper/0: 1] target-temp:80<6>[ 1.595469] [0: swapper/0: 1] channel:2, lkg:21<6>[ 1.595506] [0: swapper/0: 1] channel:1, lkg:0<6>[ 1.624491] [0: swapper/0: 1] bio: create slab <bio-0> at 0<6>[ 1.625168] [0: swapper/0: 1] Rockchip hdmi driver version 2.0<6>[ 1.625168] [0: swapper/0: 1] .<5>[ 1.625743] [0: swapper/0: 1] SCSI subsystem initialized<6>[ 1.625940] [0: swapper/0: 1] usbcore: registered new interface driver usbfs<6>[ 1.626007] [0: swapper/0: 1] usbcore: registered new interface driver hub<6>[ 1.626133] [0: swapper/0: 1] usbcore: registered new device driver usb<7>[ 1.626482] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 4<7>[ 1.626558] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 5<7>[ 1.627070] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 6<7>[ 1.627140] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 7<6>[ 1.628386] [0: swapper/0: 1] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter<7>[ 1.628743] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 85<7>[ 1.628815] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 86<6>[ 1.629763] [0: swapper/0: 1] rockchip_i2c ff660000.i2c: i2c-1: Rockchip I2C adapter<7>[ 1.630094] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 49<7>[ 1.630167] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 48<6>[ 1.630363] [0: swapper/0: 1] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter<6>[ 1.630545] [0: swapper/0: 1] media: Linux media interface: v0.10<6>[ 1.630607] [0: swapper/0: 1] Linux video capture interface: v2.00<6>[ 1.630699] [0: swapper/0: 1] pps_core: LinuxPPS API ver. 1 registered<6>[ 1.630724] [0: swapper/0: 1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it><6>[ 1.630771] [0: swapper/0: 1] PTP clock support registered<4>[ 1.631052] [0: swapper/0: 1] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)<6>[ 1.631756] [0: swapper/0: 1] Rockchip ion module is successfully loaded (v1.1)<6>[ 1.631993] [0: swapper/0: 1] rockchip-mailbox ff6b0000.mbox: Rockchip mailbox initialize, version: V1.00<6>[ 1.632772] [0: swapper/0: 1] mbox-scpi mbox-scpi.6: Scpi initialize, version: 0x1000001, chan nums: 3<6>[ 1.632803] [0: swapper/0: 1] mbox-scpi mbox-scpi.6: MCU version: V2.11 20150910<6>[ 1.633230] [0: swapper/0: 1] Advanced Linux Sound Architecture Driver Initialized.<6>[ 1.633710] [0: swapper/0: 1] Bluetooth: Core ver 2.16<6>[ 1.633768] [0: swapper/0: 1] NET: Registered protocol family 31<6>[ 1.633792] [0: swapper/0: 1] Bluetooth: HCI device and connection manager initialized<6>[ 1.633824] [0: swapper/0: 1] Bluetooth: HCI socket layer initialized<6>[ 1.633853] [0: swapper/0: 1] Bluetooth: L2CAP socket layer initialized<6>[ 1.633894] [0: swapper/0: 1] Bluetooth: SCO socket layer initialized<6>[ 1.634189] [0: kworker/0:1: 50] cfg80211: Calling CRDA to update world regulatory domain<6>[ 1.640489] [0: swapper/0: 1] vdd_arm: 712 <--> 1500 mV at 1150 mV <3>[ 1.641813] [0: swapper/0: 1] vdd_arm: failed to enabled/disable<3>[ 1.641840] [0: swapper/0: 1] vdd_arm: failed to set suspend state<3>[ 1.641940] [0: swapper/0: 1] failed to register xz3216<4>[ 1.641971] [0: swapper/0: 1] xz3216: probe of 0-0060 failed with error -12<4>[ 1.643490] [0: swapper/0: 1] This platfrom have not i2s_mclk,no need to set i2s_mclk.<6>[ 1.644552] [0: swapper/0: 1] Switching to clocksource arch_sys_counter<5>[ 1.645008] [0: swapper/0: 1] FS-Cache: Loaded<6>[ 1.645191] [0: swapper/0: 1] CacheFiles: Loaded<6>[ 1.647716] [0: swapper/0: 1] rga: Module initialized.<6>[ 1.648157] [0: swapper/0: 1] rga2 ff920000.rga: rga ion client create success!<6>[ 1.648319] [0: swapper/0: 1] rga: Driver loaded succesfully<6>[ 1.648597] [0: swapper/0: 1] fb disp policy is box<7>[ 1.648622] [0: swapper/0: 1] uboot-logo-on:1<6>[ 1.648669] [0: swapper/0: 1] rk-fb rockchip-fb: rk fb ion client create success!<6>[ 1.648696] [0: swapper/0: 1] rk-fb rockchip-fb: rockchip framebuffer driver probe<6>[ 1.649177] [0: swapper/0: 1] rk-screen rk_screen.11: rockchip screen probe success<6>[ 1.650317] [0: swapper/0: 1] rk3368-lcdc ff930000.lcdc: lcdc_dev->regs=0xffffff8000280000<6>[ 1.650725] [0: swapper/0: 1] graphics fb0: rockchip framebuffer registerd:fb0<6>[ 1.651091] [0: swapper/0: 1] graphics fb1: rockchip framebuffer registerd:fb1<6>[ 1.651291] [0: swapper/0: 1] graphics fb2: rockchip framebuffer registerd:fb2<6>[ 1.651487] [0: swapper/0: 1] graphics fb3: rockchip framebuffer registerd:fb3<6>[ 1.651685] [0: swapper/0: 1] graphics fb4: rockchip framebuffer registerd:fb4<6>[ 1.652375] [0: swapper/0: 1] rk3368-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60 <6>[ 1.665514] [0: swapper/0: 1] alloc_buffer:ion_phy_addr=0x10000000<6>[ 1.669786] [0: swapper/0: 1] fb0:phy:10000000>>vir:ffffff8000291000>>len:0x1000000<4>[ 1.726152] [0: kworker/0:1: 50] rk_battery_charger_detect_cb , battery_charger_detect 1<6>[ 1.767815] [0: swapper/0: 1] rk_iommu ff930300.vop_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7a7d7000<6>[ 1.767894] [0: swapper/0: 1] rk3368-lcdc lcdc0: lcdc0 probe ok, iommu enabled<6>[ 1.769829] [0: swapper/0: 1] NET: Registered protocol family 2<6>[ 1.770793] [0: swapper/0: 1] TCP established hash table entries: 16384 (order: 6, 262144 bytes)<6>[ 1.771272] [0: swapper/0: 1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)<6>[ 1.771765] [0: swapper/0: 1] TCP: Hash tables configured (established 16384 bind 16384)<6>[ 1.771871] [0: swapper/0: 1] TCP: reno registered<6>[ 1.771904] [0: swapper/0: 1] UDP hash table entries: 1024 (order: 3, 32768 bytes)<6>[ 1.772003] [0: swapper/0: 1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)<6>[ 1.772374] [0: swapper/0: 1] NET: Registered protocol family 1<6>[ 1.772770] [0: swapper/0: 1] RPC: Registered named UNIX socket transport module.<6>[ 1.772797] [0: swapper/0: 1] RPC: Registered udp transport module.<6>[ 1.772820] [0: swapper/0: 1] RPC: Registered tcp transport module.<6>[ 1.772843] [0: swapper/0: 1] RPC: Registered tcp NFSv4.1 backchannel transport module.<7>[ 1.773043] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 1<7>[ 1.774106] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<6>[ 1.784053] [0: swapper/0: 1] Unpacking initramfs...<6>[ 1.869320] [0: swapper/0: 1] Freeing initrd memory: 1236K (ffffffc0059f0000 - ffffffc005b25000)<4>[ 1.870485] [0: swapper/0: 1] rknandbase v1.0 2014-03-31<4>[ 1.870676] [0: swapper/0: 1] rknand: probe of ff400000.nandc failed with error -1<4>[ 1.870768] [0: swapper/0: 1] rknand: probe of ff400000.nandc0 failed with error -1<4>[ 1.870919] [0: swapper/0: 1] rknand_driver:ret = 0 <6>[ 1.871228] [0: swapper/0: 1] vcodec_service: probe device ff9a0000.vpu_combo<6>[ 1.871514] [0: swapper/0: 1] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 1.871675] [0: swapper/0: 1] vcodec_service: probe device vpu_service.15<6>[ 1.871715] [0: swapper/0: 1] vcodec_service: checking hw id 4831<6>[ 1.872638] [0: swapper/0: 1] vcodec_service: probe device hevc_service.16<6>[ 1.872690] [0: swapper/0: 1] vcodec_service: checking hw id 6867<6>[ 1.873427] [0: swapper/0: 1] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 1.873504] [0: swapper/0: 1] vcodec_service: done<6>[ 1.873527] [0: swapper/0: 1] vcodec_service: init success<6>[ 1.881882] [0: swapper/0: 1] exFAT: Version 1.2.9<5>[ 1.882383] [0: swapper/0: 1] FS-Cache: Netfs 'nfs' registered for caching<5>[ 1.883021] [0: swapper/0: 1] NFS: Registering the id_resolver key type<5>[ 1.883091] [0: swapper/0: 1] Key type id_resolver registered<5>[ 1.883115] [0: swapper/0: 1] Key type id_legacy registered<5>[ 1.883409] [0: swapper/0: 1] FS-Cache: Netfs 'cifs' registered for caching<6>[ 1.883688] [0: swapper/0: 1] NTFS driver 2.1.30 [Flags: R/W].<6>[ 1.883922] [0: swapper/0: 1] fuse init (API version 7.22)<6>[ 1.884402] [0: swapper/0: 1] msgmni has been set to 3934<6>[ 1.886568] [0: swapper/0: 1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)<6>[ 1.886598] [0: swapper/0: 1] io scheduler noop registered<6>[ 1.886733] [0: swapper/0: 1] io scheduler cfq registered (default)<6>[ 1.889184] [0: swapper/0: 1] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.<4>[ 1.890198] [0: swapper/0: 1] IEP Power ON<4>[ 1.890260] [0: swapper/0: 1] iep ion client create success!<6>[ 1.890800] [0: swapper/0: 1] rk_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7a7d2000<4>[ 1.890827] [0: swapper/0: 1] IEP Power OFF<4>[ 1.890861] [0: swapper/0: 1] IEP Driver loaded succesfully<4>[ 1.891017] [0: swapper/0: 1] Module initialized.<6>[ 1.892583] [0: swapper/0: 1] dma-pl330 ff600000.pdma: Loaded driver for PL330 DMAC-2364208<6>[ 1.892619] [0: swapper/0: 1] dma-pl330 ff600000.pdma: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12<6>[ 1.894463] [0: swapper/0: 1] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208<6>[ 1.894498] [0: swapper/0: 1] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16<6>[ 1.895035] [0: swapper/0: 1] vdd_logic: 900 <--> 1375 mV at 1000 mV <4>[ 1.895494] [0: swapper/0: 1] rk_serial.c v1.8 2014-03-04<6>[ 1.895973] [0: swapper/0: 1] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0<6>[ 1.896215] [0: swapper/0: 1] serial ff180000.serial: membase ffffff80032e2000<6>[ 1.896346] [0: swapper/0: 1] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2<6>[ 1.899404] [0: swapper/0: 1] console [ttyS2] enabled<6>[ 1.899661] [0: swapper/0: 1] serial ff690000.serial: membase ffffff80032e4000<4>[ 1.899964] [0: swapper/0: 1] PVR_K: sys.gpvr.version=Rogue L 0.22<4>[ 1.900459] [0: swapper/0: 1] raw version=0x10006,rk_tf_version=1.6<4>[ 1.900647] [0: swapper/0: 1] rgx_dvfs_infotbl[0].clock=200,min_threshold=0,max_threshold=40,coef=100<4>[ 1.900680] [0: swapper/0: 1] rgx_dvfs_infotbl[1].clock=300,min_threshold=50,max_threshold=60,coef=95<4>[ 1.900710] [0: swapper/0: 1] rgx_dvfs_infotbl[2].clock=400,min_threshold=70,max_threshold=80,coef=90<4>[ 1.900740] [0: swapper/0: 1] rgx_dvfs_infotbl[3].clock=600,min_threshold=86,max_threshold=100,coef=85<6>[ 1.930267] [0: swapper/0: 1] loop: module loaded<6>[ 1.930708] [0: swapper/0: 1] zram: Created 1 device(s) ...<4>[ 1.930823] [0: swapper/0: 1] i2c-core: driver [mpu6050B1] using legacy suspend method<4>[ 1.930853] [0: swapper/0: 1] i2c-core: driver [mpu6050B1] using legacy resume method<6>[ 1.930885] [0: swapper/0: 1] mpu_init: Probe name mpu6050B1<6>[ 1.931066] [0: swapper/0: 1] ak8963_mod_init: Probe name ak8963_mod<6>[ 1.931935] [0: swapper/0: 1] SCSI Media Changer driver v0.25 <6>[ 1.932406] [0: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6<6>[ 1.932435] [0: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com><3>[ 1.933376] [0: swapper/0: 1] stmmac_probe_config_dt: Can not read property: pmu_regulator.<6>[ 1.933410] [0: swapper/0: 1] stmmac_probe_config_dt: clock input/output? (input).<6>[ 1.933440] [0: swapper/0: 1] stmmac_probe_config_dt: TX delay(0x30).<6>[ 1.933468] [0: swapper/0: 1] stmmac_probe_config_dt: RX delay(0x20).<7>[ 1.933547] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<7>[ 1.933652] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 108<7>[ 1.933678] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<6>[ 1.933706] [0: swapper/0: 1] stmmac_probe_config_dt: is rockchip,rk3368-gmac<6>[ 1.933733] [0: swapper/0: 1] stmmc_pltfr_init:<3>[ 1.933758] [0: swapper/0: 1] stmmc_pltfr_init: ERROR: Get power-gpio failed.<6>[ 1.933793] [0: swapper/0: 1] stmmc_pltfr_init: init for RGMII<6>[ 1.933819] [0: swapper/0: 1] tx delay=0x30<6>[ 1.933819] [0: swapper/0: 1] rx delay=0x20<6>[ 1.934147] [0: swapper/0: 1] stmmac - user ID: 0x10, Synopsys ID: 0x35<6>[ 1.934174] [0: swapper/0: 1] Normal descriptors<6>[ 1.934198] [0: swapper/0: 1] Ring mode enabled<6>[ 1.934222] [0: swapper/0: 1] DMA HW capability register supported<6>[ 1.934246] [0: swapper/0: 1] RX Checksum Offload Engine supported (type 2)<6>[ 1.934272] [0: swapper/0: 1] TX Checksum insertion supported<6>[ 1.934296] [0: swapper/0: 1] Wake-Up On Lan supported<6>[ 1.934361] [0: swapper/0: 1] Enable RX Mitigation via HW Watchdog Timer<6>[ 1.934959] [0: swapper/0: 1] PPP generic driver version 2.4.2<6>[ 1.935155] [0: swapper/0: 1] PPP BSD Compression module registered<6>[ 1.935184] [0: swapper/0: 1] PPP Deflate Compression module registered<6>[ 1.935225] [0: swapper/0: 1] PPP MPPE Compression module registered<6>[ 1.935253] [0: swapper/0: 1] NET: Registered protocol family 24<6>[ 1.935308] [0: swapper/0: 1] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).<6>[ 1.935337] [0: swapper/0: 1] CSLIP: code copyright 1989 Regents of the University of California.<4>[ 1.935367] [0: swapper/0: 1] Rockchip WiFi SYS interface (V1.00) ... <4>[ 1.935422] [0: swapper/0: 1] esp_mem_init enter date Feb 21 2016 00:10:43<4>[ 1.935449] [0: swapper/0: 1] esp_mem_init VERSION [V2.5]<4>[ 1.935519] [0: swapper/0: 1] esp_mem_init complete <6>[ 1.935636] [0: swapper/0: 1] usbcore: registered new interface driver catc<6>[ 1.935702] [0: swapper/0: 1] usbcore: registered new interface driver kaweth<6>[ 1.935731] [0: swapper/0: 1] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver<6>[ 1.935799] [0: swapper/0: 1] usbcore: registered new interface driver pegasus<6>[ 1.935861] [0: swapper/0: 1] usbcore: registered new interface driver rtl8150<6>[ 1.935922] [0: swapper/0: 1] usbcore: registered new interface driver r8152<6>[ 1.935950] [0: swapper/0: 1] hso: drivers/net/usb/hso.c: Option Wireless<6>[ 1.936053] [0: swapper/0: 1] usbcore: registered new interface driver hso<6>[ 1.936124] [0: swapper/0: 1] usbcore: registered new interface driver asix<6>[ 1.936190] [0: swapper/0: 1] usbcore: registered new interface driver ax88179_178a<6>[ 1.936253] [0: swapper/0: 1] usbcore: registered new interface driver cdc_ether<6>[ 1.936319] [0: swapper/0: 1] usbcore: registered new interface driver cdc_eem<6>[ 1.936381] [0: swapper/0: 1] usbcore: registered new interface driver dm9601<6>[ 1.936443] [0: swapper/0: 1] usbcore: registered new interface driver dm9620<6>[ 1.936519] [0: swapper/0: 1] usbcore: registered new interface driver smsc75xx<6>[ 1.936592] [0: swapper/0: 1] usbcore: registered new interface driver smsc95xx<6>[ 1.936720] [0: swapper/0: 1] usbcore: registered new interface driver gl620a<6>[ 1.936817] [0: swapper/0: 1] usbcore: registered new interface driver net1080<6>[ 1.936881] [0: swapper/0: 1] usbcore: registered new interface driver plusb<6>[ 1.936945] [0: swapper/0: 1] usbcore: registered new interface driver rndis_host<6>[ 1.937032] [0: swapper/0: 1] usbcore: registered new interface driver cdc_subset<6>[ 1.937097] [0: swapper/0: 1] usbcore: registered new interface driver zaurus<6>[ 1.937161] [0: swapper/0: 1] usbcore: registered new interface driver MOSCHIP usb-ethernet driver<6>[ 1.937245] [0: swapper/0: 1] usbcore: registered new interface driver int51x1<6>[ 1.937308] [0: swapper/0: 1] usbcore: registered new interface driver kalmia<6>[ 1.937369] [0: swapper/0: 1] usbcore: registered new interface driver ipheth<6>[ 1.937437] [0: swapper/0: 1] usbcore: registered new interface driver sierra_net<6>[ 1.937500] [0: swapper/0: 1] usbcore: registered new interface driver cx82310_eth<6>[ 1.937578] [0: swapper/0: 1] usbcore: registered new interface driver cdc_ncm<6>[ 1.937641] [0: swapper/0: 1] usbcore: registered new interface driver qmi_wwan<6>[ 1.937707] [0: swapper/0: 1] usbcore: registered new interface driver cdc_mbim<6>[ 1.937736] [0: swapper/0: 1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<6>[ 1.937763] [0: swapper/0: 1] ehci-platform: EHCI generic platform driver<6>[ 1.938313] [0: swapper/0: 1] ehci-platform ff500000.usb: EHCI Host Controller<6>[ 1.938372] [0: swapper/0: 1] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 1<6>[ 1.938955] [0: swapper/0: 1] ehci-platform ff500000.usb: irq 56, io mem 0xff500000<6>[ 1.949713] [0: swapper/0: 1] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00<6>[ 1.949826] [0: swapper/0: 1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 1.949860] [0: swapper/0: 1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 1.949917] [0: swapper/0: 1] usb usb1: Product: EHCI Host Controller<6>[ 1.949949] [0: swapper/0: 1] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd<6>[ 1.949980] [0: swapper/0: 1] usb usb1: SerialNumber: ff500000.usb<6>[ 1.950518] [0: swapper/0: 1] hub 1-0:1.0: USB hub found<6>[ 1.950561] [0: swapper/0: 1] hub 1-0:1.0: 1 port detected<6>[ 1.951147] [0: swapper/0: 1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver<6>[ 1.951176] [0: swapper/0: 1] ohci-platform: OHCI generic platform driver<6>[ 1.951483] [0: swapper/0: 1] ohci-platform ff520000.usb: Generic Platform OHCI controller<6>[ 1.951532] [0: swapper/0: 1] ohci-platform ff520000.usb: new USB bus registered, assigned bus number 2<6>[ 1.951609] [0: swapper/0: 1] ohci-platform ff520000.usb: irq 57, io mem 0xff520000<6>[ 1.985147] [0: kworker/u16:1: 64] hdmi output corlor mode is 3<4>[ 1.985183] [0: kworker/u16:1: 64] hdmi connect to lcdc0<6>[ 1.985211] [0: kworker/u16:1: 64] switch:en=1,lcdc_id=0,screen type=6,cur type=1<6>[ 1.985260] [0: kworker/u16:1: 64] rk3368-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60 <6>[ 1.985316] [0: kworker/u16:1: 64] pixel clk is 148500000 tmds clk is 148500000<6>[ 1.985380] [0: kworker/u16:1: 64] rockchip-hdmiv2 ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.<6>[ 2.012751] [0: swapper/0: 1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001<6>[ 2.012788] [0: swapper/0: 1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.012820] [0: swapper/0: 1] usb usb2: Product: Generic Platform OHCI controller<6>[ 2.012852] [0: swapper/0: 1] usb usb2: Manufacturer: Linux 3.10.0 ohci_hcd<6>[ 2.012882] [0: swapper/0: 1] usb usb2: SerialNumber: ff520000.usb<6>[ 2.013428] [0: swapper/0: 1] hub 2-0:1.0: USB hub found<6>[ 2.013471] [0: swapper/0: 1] hub 2-0:1.0: 1 port detected<6>[ 2.013876] [0: swapper/0: 1] usbcore: registered new interface driver cdc_acm<6>[ 2.013905] [0: swapper/0: 1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters<6>[ 2.013991] [0: swapper/0: 1] usbcore: registered new interface driver usblp<6>[ 2.014064] [0: swapper/0: 1] usbcore: registered new interface driver cdc_wdm<6>[ 2.014179] [0: swapper/0: 1] usbcore: registered new interface driver usb-storage<6>[ 2.014244] [0: swapper/0: 1] usbcore: registered new interface driver ums-alauda<6>[ 2.014316] [0: swapper/0: 1] usbcore: registered new interface driver ums-cypress<6>[ 2.014380] [0: swapper/0: 1] usbcore: registered new interface driver ums-datafab<6>[ 2.014443] [0: swapper/0: 1] usbcore: registered new interface driver ums_eneub6250<6>[ 2.014505] [0: swapper/0: 1] usbcore: registered new interface driver ums-freecom<6>[ 2.014568] [0: swapper/0: 1] usbcore: registered new interface driver ums-isd200<6>[ 2.014630] [0: swapper/0: 1] usbcore: registered new interface driver ums-jumpshot<6>[ 2.014693] [0: swapper/0: 1] usbcore: registered new interface driver ums-karma<6>[ 2.014755] [0: swapper/0: 1] usbcore: registered new interface driver ums-onetouch<6>[ 2.014819] [0: swapper/0: 1] usbcore: registered new interface driver ums-sddr09<6>[ 2.014886] [0: swapper/0: 1] usbcore: registered new interface driver ums-sddr55<6>[ 2.014949] [0: swapper/0: 1] usbcore: registered new interface driver ums-usbat<6>[ 2.015078] [0: swapper/0: 1] usbcore: registered new interface driver usbserial<6>[ 2.015145] [0: swapper/0: 1] usbcore: registered new interface driver usbserial_generic<6>[ 2.015198] [0: swapper/0: 1] usbserial: USB Serial support registered for generic<6>[ 2.015264] [0: swapper/0: 1] usbcore: registered new interface driver option<6>[ 2.015315] [0: swapper/0: 1] usbserial: USB Serial support registered for GSM modem (1-port)<6>[ 2.015509] [0: swapper/0: 1] usbcore: registered new interface driver trancevibrator<6>[ 2.015537] [0: swapper/0: 1] usb20_otg: version 3.10a 21-DEC-2012<4>[ 2.016073] [0: swapper/0: 1] ffffff8003400040<4>[ 2.016104] [0: swapper/0: 1] Core Release: 3.10a<4>[ 2.016130] [0: swapper/0: 1] Setting default values for core params<4>[ 2.016287] [0: swapper/0: 1] Using Buffer DMA mode<4>[ 2.016314] [0: swapper/0: 1] Periodic Transfer Interrupt Enhancement - disabled<4>[ 2.016340] [0: swapper/0: 1] Multiprocessor Interrupt Enhancement - disabled<4>[ 2.016367] [0: swapper/0: 1] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 2.016392] [0: swapper/0: 1] ^^^^^^^^^^^^^^^^^Device Mode<4>[ 2.016424] [0: swapper/0: 1] Dedicated Tx FIFOs mode<4>[ 2.016469] [0: swapper/0: 1] pcd_init otg_dev = ffffffc0056a7b40<6>[ 2.016669] [0: swapper/0: 1] usb20_otg ff580000.usb: DWC OTG Controller<6>[ 2.016718] [0: swapper/0: 1] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 3<6>[ 2.016772] [0: swapper/0: 1] usb20_otg ff580000.usb: irq 55, io mem 0x00000000<6>[ 2.016870] [0: swapper/0: 1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002<6>[ 2.016905] [0: swapper/0: 1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1<6>[ 2.016937] [0: swapper/0: 1] usb usb3: Product: DWC OTG Controller<6>[ 2.016967] [0: swapper/0: 1] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd<6>[ 2.016998] [0: swapper/0: 1] usb usb3: SerialNumber: ff580000.usb<6>[ 2.017493] [0: swapper/0: 1] hub 3-0:1.0: USB hub found<6>[ 2.017535] [0: swapper/0: 1] hub 3-0:1.0: 1 port detected<6>[ 2.028517] [0: swapper/0: 1] usb20_host: version 3.10a 21-DEC-2012<6>[ 2.047005] [0: swapper/0: 1] usbcore: registered new interface driver xpad<6>[ 2.047093] [0: swapper/0: 1] usbcore: registered new interface driver usb_acecad<6>[ 2.047166] [0: swapper/0: 1] usbcore: registered new interface driver aiptek<6>[ 2.047237] [0: swapper/0: 1] usbcore: registered new interface driver gtco<6>[ 2.047308] [0: swapper/0: 1] usbcore: registered new interface driver hanwang<6>[ 2.047376] [0: swapper/0: 1] usbcore: registered new interface driver kbtab<6>[ 2.047463] [0: swapper/0: 1] usbcore: registered new interface driver wacom<4>[ 2.048113] [0: swapper/0: 1] sensor_register_slave:mma8452,id=17<4>[ 2.048146] [0: swapper/0: 1] sensor_register_slave:gs_mc3230,id=23<4>[ 2.048171] [0: swapper/0: 1] gsensor_init<4>[ 2.048197] [0: swapper/0: 1] sensor_register_slave:mpu6880_acc,id=24<4>[ 2.048224] [0: swapper/0: 1] sensor_register_slave:mpu6500_acc,id=25<4>[ 2.048250] [0: swapper/0: 1] sensor_register_slave:cm3217,id=48<4>[ 2.048277] [0: swapper/0: 1] sensor_register_slave:cm3218,id=49<3>[ 2.048756] [0: swapper/0: 1] .. rk pwm remotectl v1.1 init<6>[ 2.049087] [0: swapper/0: 1] input: ff680030.pwm as /devices/ff680030.pwm/input/input0<7>[ 2.052281] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<6>[ 2.054061] [0: swapper/0: 1] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0<6>[ 2.054129] [0: swapper/0: 1] i2c /dev entries driver<6>[ 2.054884] [0: swapper/0: 1] IR NEC protocol handler initialized<6>[ 2.054913] [0: swapper/0: 1] IR RC5(x) protocol handler initialized<6>[ 2.054938] [0: swapper/0: 1] IR RC6 protocol handler initialized<6>[ 2.054965] [0: swapper/0: 1] IR JVC protocol handler initialized<6>[ 2.054991] [0: swapper/0: 1] IR Sony protocol handler initialized<6>[ 2.055016] [0: swapper/0: 1] IR RC5 (streamzap) protocol handler initialized<6>[ 2.055042] [0: swapper/0: 1] IR SANYO protocol handler initialized<6>[ 2.055068] [0: swapper/0: 1] IR MCE Keyboard/mouse protocol handler initialized<6>[ 2.055296] [0: swapper/0: 1] usbcore: registered new interface driver uvcvideo<6>[ 2.055323] [0: swapper/0: 1] USB Video Class driver (1.1.1)<4>[ 2.055352] [0: swapper/0: 1] CamSys driver version: v0.32.0, CamSys head file version: v0.11.0<3>[ 2.055381] [0: swapper/0: 1] E:camsys_soc_init(30): camsys_soc_init exit!<4>[ 2.058206] [0: swapper/0: 1] D1:camsys_mipiphy_probe_cb(115): compatible is rockchip,rk3368<4>[ 2.058206] [0: swapper/0: 1] <4>[ 2.058303] [0: swapper/0: 1] D1:camsys_mipiphy_probe_cb(186): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)<4>[ 2.058423] [0: swapper/0: 1] D1:camsys_mipiphy_probe_cb(183): ff910000.isp mipi phy1 probe success(reg_phy: 0xff964000 reg_vir: 0xffffff8003338000 size: 0x4000)<4>[ 2.058469] [0: swapper/0: 1] D1:camsys_mipiphy_probe_cb(201): csiphy vir addr=0xffffff8003368000<4>[ 2.058531] [0: swapper/0: 1] D1:camsys_mipiphy_probe_cb(210): rk_cru_base=0xffffff8003336000<4>[ 2.058581] [0: swapper/0: 1] D1:camsys_mipiphy_probe_cb(214): rk_grf_base=0xffffff800333e000<4>[ 2.059160] [0: swapper/0: 1] D1:camsys_platform_probe(1394): ff910000.isp memory:<4>[ 2.059195] [0: swapper/0: 1] D1:camsys_platform_probe(1404): Register memory (phy: 0xff910000 vir: 0xffffff80033c0000 size: 0x10000)<4>[ 2.059228] [0: swapper/0: 1] D1:camsys_platform_probe(1399): I2c memory (phy: 0x591c000 vir: 0xffffffc00571c000 size: 0x1000)<4>[ 2.059259] [0: swapper/0: 1] D1:camsys_init_ext_fsh_module(20): init external flash module<4>[ 2.059288] [0: swapper/0: 1] D1:camsys_platform_probe(1419): Probe ff910000.isp device success <3>[ 2.060256] [0: swapper/0: 1] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.060302] [0: swapper/0: 1] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<7>[ 2.060575] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 12<4>[ 2.061189] [0: swapper/0: 1] rockchip-thermal ff280000.tsadc: Missing tshut-polarity property, using default (low)<6>[ 2.061565] [0: swapper/0: 1] device-mapper: uevent: version 1.0.3<6>[ 2.061876] [0: swapper/0: 1] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com<6>[ 2.077777] [0: swapper/0: 1] Bluetooth: HCI UART driver ver 2.2<6>[ 2.077809] [0: swapper/0: 1] Bluetooth: HCI H4 protocol initialized<6>[ 2.077836] [0: swapper/0: 1] Bluetooth: HCILL protocol initialized<6>[ 2.080969] [0: swapper/0: 1] rockchip_big_little: version 1.0, suspend freq 1008 1008 MHz<6>[ 2.081483] [0: swapper/0: 1] cpuidle: using governor ladder<6>[ 2.081514] [0: swapper/0: 1] cpuidle: using governor menu<6>[ 2.082184] [0: swapper/0: 1] Synopsys Designware Multimedia Card Interface Driver<6>[ 2.082212] [0: swapper/0: 1] MHSC version = Ver 2.00 2015-06-10<4>[ 2.082685] [0: swapper/0: 1] dw cru_regsbase addr 0x320.<4>[ 2.082713] [0: swapper/0: 1] dw cru_reset_offset val 3.<6>[ 2.082747] [0: swapper/0: 1] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a<4>[ 2.128346] [0: kworker/0:1: 50] Using Buffer DMA mode<4>[ 2.128368] [0: kworker/0:1: 50] Periodic Transfer Interrupt Enhancement - disabled<4>[ 2.128384] [0: kworker/0:1: 50] Multiprocessor Interrupt Enhancement - disabled<4>[ 2.128401] [0: kworker/0:1: 50] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 2.128417] [0: kworker/0:1: 50] ^^^^^^^^^^^^^^^^^^Host Mode<6>[ 2.128675] [0: swapper/0: 1] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.<4>[ 2.128870] [0: swapper/0: 1] dw_mci_init_slot: fmin=400000, fmax=150000000 [mmc0]<7>[ 2.128909] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<4>[ 2.129006] [0: swapper/0: 1] 1358..dw_mci_set_ios: no card. [mmc0]<4>[ 2.146484] [0: swapper/0: 1] 1358..dw_mci_set_ios: no card. [mmc0]<6>[ 2.166199] [0: swapper/0: 1] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo<6>[ 2.166221] [0: swapper/0: 1] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized<4>[ 2.166910] [0: swapper/0: 1] dw cru_regsbase addr 0x320.<4>[ 2.166930] [0: swapper/0: 1] dw cru_reset_offset val 0.<6>[ 2.166950] [0: swapper/0: 1] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a<4>[ 2.167134] [0: kworker/u16:1: 64] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]<6>[ 2.168346] [0: swapper/0: 1] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.<4>[ 2.168505] [0: swapper/0: 1] dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]<7>[ 2.168566] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<6>[ 2.168631] [0: swapper/0: 1] mmc1: no vmmc regulator found<4>[ 2.168848] [0: swapper/0: 1] 1358..dw_mci_set_ios: no card. [mmc1]<4>[ 2.176198] [0: kworker/u16:0: 6] Init: Power Port (0)<4>[ 2.176218] [0: kworker/u16:0: 6] rk_battery_charger_detect_cb , battery_charger_detect 5<4>[ 2.176266] [0: kworker/0:1: 50] ff580000.usb resume, HPRT0:0x1000<4>[ 2.176388] [0: kworker/0:1: 50] ff580000.usb suspend, HPRT0:0x1000<4>[ 2.185846] [0: swapper/0: 1] 1358..dw_mci_set_ios: no card. [mmc1]<6>[ 2.205574] [0: swapper/0: 1] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo<6>[ 2.205591] [0: swapper/0: 1] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized<4>[ 2.206221] [0: swapper/0: 1] dw cru_regsbase addr 0x320.<4>[ 2.206237] [0: swapper/0: 1] dw cru_reset_offset val 1.<6>[ 2.206254] [0: swapper/0: 1] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a<6>[ 2.206567] [0: swapper/0: 1] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.<4>[ 2.206719] [0: swapper/0: 1] dw_mci_init_slot: fmin=200000, fmax=150000000 [mmc2]<7>[ 2.206751] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<4>[ 2.206973] [0: swapper/0: 1] 1358..dw_mci_set_ios: no card. [mmc2]<4>[ 2.225279] [0: swapper/0: 1] 1358..dw_mci_set_ios: no card. [mmc2]<6>[ 2.226008] [0: kworker/u16:1: 64] mmc0: BKOPS_EN bit is not set<4>[ 2.228324] [0: kworker/u16:1: 64] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]<6>[ 2.236706] [0: kworker/u16:1: 64] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)<4>[ 2.236733] [0: kworker/u16:1: 64] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]<6>[ 2.236767] [0: kworker/u16:1: 64] [mmc0] tuning regsbase addr 0x418.<3>[ 2.237003] I[0: swapper/0: 0] [mmc0] Data transmission error !!!! MINTSTS: [0x00000088]<3>[ 2.237017] I[0: swapper/0: 0] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.<3>[ 2.237052] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-84<3>[ 2.237090] I[0: swapper/0: 0] [mmc0] Data transmission error !!!! MINTSTS: [0x00000088]<3>[ 2.237103] I[0: swapper/0: 0] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.<3>[ 2.237134] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-84<3>[ 2.237170] I[0: swapper/0: 0] [mmc0] Data transmission error !!!! MINTSTS: [0x00002000]<3>[ 2.237184] I[0: swapper/0: 0] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.<3>[ 2.237207] I[0: swapper/0: 0] dwmmc_rockchip ff0f0000.rksdmmc: data FIFO error (status=00002000)<3>[ 2.237230] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-5<3>[ 2.237268] I[0: swapper/0: 0] [mmc0] Data transmission error !!!! MINTSTS: [0x00000088]<3>[ 2.237281] I[0: swapper/0: 0] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.<3>[ 2.237312] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-84<3>[ 2.237347] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115<3>[ 2.238108] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 57-282 (21 len)<3>[ 2.238125] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 57-282 (21 len)<3>[ 2.238140] [0: kworker/u16:1: 64] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 169<6>[ 2.238516] [0: kworker/u16:1: 64] mmc0: new HS200 MMC card at address 0001<6>[ 2.238821] [0: kworker/u16:1: 64] mmcblk0: mmc0:0001 H8G1e 7.28 GiB <6>[ 2.239069] [0: kworker/u16:1: 64] uboot: 0x000400000 -- 0x000800000 (4 MB)<6>[ 2.239085] [0: kworker/u16:1: 64] trust: 0x000800000 -- 0x000c00000 (4 MB)<6>[ 2.239100] [0: kworker/u16:1: 64] misc: 0x000c00000 -- 0x001000000 (4 MB)<6>[ 2.239114] [0: kworker/u16:1: 64] resource: 0x001000000 -- 0x002000000 (16 MB)<6>[ 2.239128] [0: kworker/u16:1: 64] kernel: 0x002000000 -- 0x003000000 (16 MB)<6>[ 2.239142] [0: kworker/u16:1: 64] boot: 0x003000000 -- 0x005000000 (32 MB)<6>[ 2.239156] [0: kworker/u16:1: 64] recovery: 0x005000000 -- 0x007000000 (32 MB)<6>[ 2.239170] [0: kworker/u16:1: 64] backup: 0x007000000 -- 0x00e000000 (112 MB)<6>[ 2.239184] [0: kworker/u16:1: 64] cache: 0x00e000000 -- 0x016000000 (128 MB)<6>[ 2.239199] [0: kworker/u16:1: 64] kpanic: 0x016000000 -- 0x016400000 (4 MB)<6>[ 2.239213] [0: kworker/u16:1: 64] system: 0x016400000 -- 0x056400000 (1024 MB)<6>[ 2.239227] [0: kworker/u16:1: 64] metadata: 0x056400000 -- 0x057400000 (16 MB)<6>[ 2.239241] [0: kworker/u16:1: 64] baseparamer: 0x057400000 -- 0x057800000 (4 MB)<6>[ 2.239255] [0: kworker/u16:1: 64] radical_update: 0x057800000 -- 0x05b800000 (64 MB)<6>[ 2.239269] [0: kworker/u16:1: 64] userdata: 0x05b800000 -- 0x1d1c00000 (5988 MB)<6>[ 2.239305] [0: kworker/u16:1: 64] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p151358..dw_mci_set_ios: no card. [mmc1]<6>[ 2.244973] [0: swapper/0: 1] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo<6>[ 2.244991] [0: swapper/0: 1] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized<6>[ 2.245310] [0: swapper/0: 1] hidraw: raw HID events driver (C) Jiri Kosina<6>[ 2.246689] [0: swapper/0: 1] usbcore: registered new interface driver usbhid<6>[ 2.246706] [0: swapper/0: 1] usbhid: USB HID core driver<6>[ 2.246825] [0: swapper/0: 1] ashmem: initialized<6>[ 2.246924] [0: swapper/0: 1] logger: created 256K log 'log_main'<6>[ 2.247013] [0: swapper/0: 1] logger: created 256K log 'log_events'<6>[ 2.247104] [0: swapper/0: 1] logger: created 256K log 'log_radio'<6>[ 2.247190] [0: swapper/0: 1] logger: created 256K log 'log_system'<6>[ 2.247394] [0: swapper/0: 1] ddr_rk3368: rockchip_ddr_init<6>[ 2.247521] [0: swapper/0: 1] ddr_rk3368: Rockchip DDR Initialize, verision: V1.01 20150819<7>[ 2.247608] [0: swapper/0: 1] ddr_rk3368: In Func:ddr_init,dram_speed_bin:21,freq:0,lcdc_type:6<4>[ 2.247656] [0: kworker/u16:1: 64] 1358..dw_mci_set_ios: no card. [mmc2]<7>[ 2.260024] [0: swapper/0: 1] ddr_rk3368: ddr_init out<6>[ 2.260037] [0: swapper/0: 1] ddr_rk3368: rockchip_ddr_probe: success<7>[ 2.260807] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 2<7>[ 2.260832] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 2<6>[ 2.261051] [0: swapper/0: 1] input: rk29-keypad as /devices/ff100000.adc/key.33/input/input1<7>[ 2.262215] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 127<6>[ 2.262572] [0: swapper/0: 1] rockchip-spdif ff880000.spdif: spdif ready.<6>[ 2.283018] [0: swapper/0: 1] rockchip-rk1000 rockchip-rk1000.28: rk1000_codec <-> rockchip-i2s.0 mapping ok<6>[ 2.283797] [0: swapper/0: 1] u32 classifier<6>[ 2.283814] [0: swapper/0: 1] Actions configured<6>[ 2.283831] [0: swapper/0: 1] Netfilter messages via NETLINK v0.30.<6>[ 2.283886] [0: swapper/0: 1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)<6>[ 2.284183] [0: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink.<6>[ 2.284553] [0: swapper/0: 1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0<6>[ 2.284567] [0: swapper/0: 1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.<6>[ 2.284789] [0: swapper/0: 1] xt_time: kernel timezone is -0000<6>[ 2.284986] [0: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team<6>[ 2.285137] [0: swapper/0: 1] arp_tables: (C) 2002 David S. Miller<6>[ 2.285180] [0: swapper/0: 1] TCP: cubic registered<6>[ 2.285193] [0: swapper/0: 1] Initializing XFRM netlink socket<6>[ 2.285423] [0: swapper/0: 1] NET: Registered protocol family 10<6>[ 2.285999] [0: swapper/0: 1] mip6: Mobile IPv6<6>[ 2.286037] [0: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team<6>[ 2.286186] [0: swapper/0: 1] sit: IPv6 over IPv4 tunneling driver<6>[ 2.286525] [0: swapper/0: 1] NET: Registered protocol family 17<6>[ 2.286557] [0: swapper/0: 1] NET: Registered protocol family 15<5>[ 2.286618] [0: swapper/0: 1] Bridge firewalling registered<6>[ 2.286636] [0: swapper/0: 1] Ebtables v2.0 registered<6>[ 2.286797] [0: swapper/0: 1] Bluetooth: RFCOMM TTY layer initialized<6>[ 2.286823] [0: swapper/0: 1] Bluetooth: RFCOMM socket layer initialized<6>[ 2.286836] [0: swapper/0: 1] Bluetooth: RFCOMM ver 1.11<6>[ 2.286849] [0: swapper/0: 1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<6>[ 2.286862] [0: swapper/0: 1] Bluetooth: BNEP filters: protocol multicast<6>[ 2.286880] [0: swapper/0: 1] Bluetooth: BNEP socket layer initialized<6>[ 2.286893] [0: swapper/0: 1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2<6>[ 2.286911] [0: swapper/0: 1] Bluetooth: HIDP socket layer initialized<6>[ 2.286976] [0: swapper/0: 1] l2tp_core: L2TP core driver, V2.0<6>[ 2.286996] [0: swapper/0: 1] l2tp_ppp: PPPoL2TP kernel driver, V2.0<6>[ 2.287010] [0: swapper/0: 1] [WLAN_RFKILL]: Enter rfkill_wlan_init<6>[ 2.287252] [0: swapper/0: 1] [WLAN_RFKILL]: Enter rfkill_wlan_probe<6>[ 2.287319] [0: swapper/0: 1] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6330<6>[ 2.287334] [0: swapper/0: 1] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.<6>[ 2.287347] [0: swapper/0: 1] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.<6>[ 2.287361] [0: swapper/0: 1] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.<7>[ 2.287412] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 100<6>[ 2.287423] [0: swapper/0: 1] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 100, flags = 0.<7>[ 2.287437] [0: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<7>[ 2.287459] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 102<6>[ 2.287472] [0: swapper/0: 1] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 102, flags = 0.<6>[ 2.287488] [0: swapper/0: 1] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio<6>[ 2.287526] [0: swapper/0: 1] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V<6>[ 2.287540] [0: swapper/0: 1] [WLAN_RFKILL]: Exit rfkill_wlan_probe<6>[ 2.287598] [0: swapper/0: 1] [BT_RFKILL]: Enter rfkill_rk_init<7>[ 2.287878] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 91<6>[ 2.287892] [0: swapper/0: 1] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 91.<7>[ 2.287918] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 99<6>[ 2.287929] [0: swapper/0: 1] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 99.<7>[ 2.287953] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 101<6>[ 2.287964] [0: swapper/0: 1] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 101.<7>[ 2.287987] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 98<6>[ 2.287999] [0: swapper/0: 1] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 98.<7>[ 2.288021] [0: swapper/0: 1] of_get_named_gpio_flags exited with status 103<6>[ 2.288032] [0: swapper/0: 1] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 103.<6>[ 2.288089] [0: swapper/0: 1] [BT_RFKILL]: Request irq for bt wakeup host<6>[ 2.288172] [0: swapper/0: 1] [BT_RFKILL]: ** disable irq<6>[ 2.288264] [0: swapper/0: 1] [BT_RFKILL]: ap6330 device registered.<5>[ 2.288340] [0: swapper/0: 1] Key type dns_resolver registered<5>[ 2.289185] [0: swapper/0: 1] Registering SWP/SWPB emulation handler<6>[ 2.289206] [0: swapper/0: 1] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 0x0000000002000000@0x000000007dc00000<7>[ 2.293182] [0: ddrfreqd: 139] ddr_rk3368: In func _ddr_change_freq,freq=792MHz<7>[ 2.293198] [0: ddrfreqd: 139] ddr_rk3368: lcdc type:6<6>[ 2.293277] [0: swapper/0: 1] ddrfreq: verion 1.2 20140526<6>[ 2.293293] [0: swapper/0: 1] ddrfreq: normal 792MHz video_1080p 0MHz video_4k 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 792MHz<6>[ 2.293307] [0: swapper/0: 1] ddrfreq: auto-freq=0<6>[ 2.293319] [0: swapper/0: 1] ddrfreq: auto-freq-table[0] 240MHz<6>[ 2.293331] [0: swapper/0: 1] ddrfreq: auto-freq-table[1] 324MHz<6>[ 2.293343] [0: swapper/0: 1] ddrfreq: auto-freq-table[2] 396MHz<6>[ 2.293355] [0: swapper/0: 1] ddrfreq: auto-freq-table[3] 528MHz<7>[ 2.309200] [0: ddrfreqd: 139] ddr_rk3368: Func _ddr_change_freq out,freq=792MHz<7>[ 2.310569] [4: swapper/0: 1] of_get_named_gpio_flags: can't parse gpios property<3>[ 2.310600] [4: swapper/0: 1] video src is lcdc0, prop is 0<6>[ 2.311086] [4: swapper/0: 1] rk1000 tvencoder ver 2.0 probe ok<6>[ 2.311149] [4: swapper/0: 1] regulator-dummy: disabling<3>[ 2.311513] [0: kworker/u16:1: 64] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.311542] [0: kworker/u16:1: 64] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 2.311609] [4: swapper/0: 1] =======================================================<4>[ 2.311639] [4: swapper/0: 1] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====<4>[ 2.311665] [4: swapper/0: 1] =======================================================<4>[ 2.311692] [4: swapper/0: 1] WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.<4>[ 2.311779] [0:wifi_init_threa: 143] dhd_module_init: in<4>[ 2.311794] [0:wifi_init_threa: 143] ======== bcm_wlan_set_plat_data ========<6>[ 2.311808] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter<4>[ 2.311849] [0:wifi_init_threa: 143] host_oob_irq: 6
- <4>[ 2.311861] [0:wifi_init_threa: 143] host_oob_irq_flags=4<4>[ 2.311873] [0:wifi_init_threa: 143] dhd_wifi_platform_load: Enter<4>[ 2.311896] [0:wifi_init_threa: 143] Power-up adapter 'DHD generic adapter'<4>[ 2.311911] [4: swapper/0: 1] pcd_pullup, is_on 0<4>[ 2.311934] [0:wifi_init_threa: 143] wifi_platform_set_power = 1<4>[ 2.311950] [0:wifi_init_threa: 143] ======== PULL WL_REG_ON HIGH! ========<6>[ 2.311967] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_power: 1<6>[ 2.311983] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1<6>[ 2.312000] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.<4>[ 2.312034] I[0: swapper/0: 0] WARN::dwc_otg_handle_mode_mismatch_intr:69: Mode Mismatch Interrupt: currently in Host mode<4>[ 2.312034] I[0: swapper/0: 0] <6>[ 2.312088] [4: swapper/0: 1] file system registered<6>[ 2.313052] [4: swapper/0: 1] android_usb gadget: Mass Storage Function, version: 2009/09/11<6>[ 2.313084] [4: swapper/0: 1] android_usb gadget: Number of LUNs=2<6>[ 2.313113] [4: swapper/0: 1] lun0: LUN: removable file: (no medium)<6>[ 2.313142] [4: swapper/0: 1] lun1: LUN: removable file: (no medium)<6>[ 2.313431] [4: swapper/0: 1] android_usb gadget: android_usb ready<6>[ 2.313580] [4: swapper/0: 1] sensor_init: Probe name sensors<4>[ 2.313624] [4: swapper/0: 1] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01<6>[ 2.314221] [4: swapper/0: 1] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:00:28 UTC (1293883228)<6>[ 2.324704] [4: swapper/0: 1] rockchip-spdif-card rockchip-spdif-card.27: rk-hdmi-spdif-hifi <-> ff880000.spdif mapping ok<6>[ 2.325454] [4: swapper/0: 1] rk3688_suspend_init: pm_ctrbits =0x80104<3>[ 2.325584] [0: kworker/u16:1: 64] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.325612] [0: kworker/u16:1: 64] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<6>[ 2.325973] [4: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio<6>[ 2.325999] [4: swapper/0: 1] ALSA device list:<6>[ 2.326022] [4: swapper/0: 1] #0: RK_RK1000<6>[ 2.326044] [4: swapper/0: 1] #1: RK-SPDIF-CARD<6>[ 2.326433] [4: swapper/0: 1] Freeing unused kernel memory: 240K (ffffffc000c40000 - ffffffc000c7c000)<6>[ 2.343343] [0: khubd: 63] usb 1-1: new high-speed USB device number 2 using ehci-platform<6>[ 2.412195] [0:wifi_init_threa: 143] [WLAN_RFKILL]: wifi turn on power. 100<11>[ 2.447107] [5: ueventd: 146] init: invalid gid 'trace'<6>[ 2.492384] [0: khubd: 63] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608<6>[ 2.492407] [0: khubd: 63] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0<6>[ 2.492435] [0: khubd: 63] usb 1-1: Product: USB2.0 Hub<6>[ 2.493109] [0: khubd: 63] hub 1-1:1.0: USB hub found<6>[ 2.493488] [0: khubd: 63] hub 1-1:1.0: 4 ports detected<3>[ 2.495763] [0: kworker/u16:1: 64] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.495795] [0: kworker/u16:1: 64] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<11>[ 2.505865] [0: init: 1] init: /dev/hw_random not found<6>[ 2.505927] [0: init: 1] keychord: using input dev ff680030.pwm for fevent<6>[ 2.505947] [0: init: 1] keychord: using input dev rk29-keypad for fevent<6>[ 2.508600] [0: init: 1] pm policy 0 -> 1<11>[ 2.508956] [0: init: 1] init: /dev/hw_random not found<14>[ 2.509801] [0: init: 147] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system<14>[ 2.510674] [0: init: 147] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: The filesystem is already 262144 blocks long. Nothing to do!resize2fs: <4>[ 2.521245] [0: init: 147] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option<6>[ 2.525150] [0: init: 147] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 2.525219] [0: init: 147] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/system,/system,ext4)=0<14>[ 2.526460] [0: init: 147] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/system<14>[ 2.531624] [0: init: 147] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 2.531690] [0: init: 147] e2fsck: system: clean, 2079/57600 files, 229702/262144 blocks<6>[ 2.534755] [0: init: 147] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc<14>[ 2.534819] [0: init: 147] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/system,target=/system,type=ext4)=0<6>[ 2.538380] [0: init: 147] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard<14>[ 2.538443] [0: init: 147] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0<4>[ 2.538959] [0: init: 147] EXT4-fs (mmcblk0p12): Ignoring removed nomblk_io_submit option<6>[ 2.542054] [0: init: 147] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 2.542119] [0: init: 147] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,/metadata,ext4)=0<14>[ 2.543180] [0: init: 147] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata<14>[ 2.555150] [0: init: 147] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 2.555208] [0: init: 147] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks<6>[ 2.559054] [0: init: 147] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard<14>[ 2.559119] [0: init: 147] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0<14>[ 2.559177] [0: init: 147] fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata<14>[ 2.588203] [0: init: 147] fsck.f2fs: Info: Force to fix corruption<14>[ 2.588258] [0: init: 147] fsck.f2fs: Info: sector size = 512<14>[ 2.588285] [0: init: 147] fsck.f2fs: Info: total sectors = 12263424 (in 512bytes)<14>[ 2.588311] [0: init: 147] fsck.f2fs: Can't find a valid F2FS superblock at 0x0<14>[ 2.588335] [0: init: 147] fsck.f2fs: Can't find a valid F2FS superblock at 0x1<14>[ 2.588366] [0: init: 147] fsck.f2fs: fsck.f2fs terminated by exit(255)<14>[ 2.588699] [0: init: 147] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=f2fs)=-1<4>[ 2.589155] [0: init: 147] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option<6>[ 2.592669] [0: init: 147] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro<14>[ 2.592734] [0: init: 147] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,/data,ext4)=0<14>[ 2.595237] [0: init: 147] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata<14>[ 2.610039] [0: init: 147] e2fsck: e2fsck 1.42.9 (28-Dec-2013)<14>[ 2.610094] [0: init: 147] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata: clean, 11/383520 files, 51035/1532928 blocks<6>[ 2.613966] [0: init: 147] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic<14>[ 2.614032] [0: init: 147] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0<11>[ 2.614060] [0: init: 147] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata on /data with fs_type=ext4 instead of f2fs<4>[ 2.618954] [0:wifi_init_threa: 143] wifi_platform_bus_enumerate device present 1<4>[ 2.618980] [0:wifi_init_threa: 143] ======== Card detection to detect SDIO card! ========<6>[ 2.618996] [0:wifi_init_threa: 143] mmc2:mmc host rescan start!<6>[ 2.620578] [0: init: 1] zram0: detected capacity change from 0 to 533413888<6>[ 2.648867] [0: init: 1] Adding 520908k swap on /dev/block/zram0. Priority:-1 extents:1 across:520908k SS<3>[ 2.701654] [0: init: 1] EXT4-fs (mmcblk0p15): Unrecognized mount option "seclabel" or missing value<14>[ 2.709697] [0: healthd: 174] bat_cap: oldcap path is /sys/devices/ff100000.adc<11>[ 2.709779] [0: healthd: 174] bat_cap: oldcap_path no exist<6>[ 2.709928] [0: healthd: 174] binder: 174:174 transaction failed 29189, size 0-0<11>[ 2.715524] [1: init: 1] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'<11>[ 2.715576] [1: init: 1] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'<11>[ 2.715813] [1: init: 1] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead<6>[ 2.718268] [1: adbd: 182] read descriptors<6>[ 2.718307] [1: adbd: 182] read strings<6>[ 2.793957] [0: khubd: 63] usb 1-1.4: new full-speed USB device number 3 using ehci-platform<11>[ 2.807219] [0: init: 1] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'<11>[ 2.808059] [0: init: 1] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'<11>[ 2.809111] [0: init: 1] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'<3>[ 2.813371] [1: init: 1] android_usb: already disabled<4>[ 2.813543] [1: init: 1] pcd_pullup, is_on 1<4>[ 2.813667] [1: init: 1] pcd_pullup, is_on 0<4>[ 2.813690] [1: init: 1] WARN::ep_dequeue:423: bogus device state<4>[ 2.813690] [1: init: 1] <4>[ 2.813712] I[0: displayd: 178] WARN::dwc_otg_handle_mode_mismatch_intr:69: Mode Mismatch Interrupt: currently in Host mode<4>[ 2.813712] I[0: displayd: 178] <4>[ 2.814472] [1: init: 1] pcd_pullup, is_on 1<4>[ 2.835310] [0: kworker/u16:1: 64] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]<4>[ 2.870502] [0: kworker/u16:1: 64] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 2.872037] [0: kworker/u16:1: 64] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 2.873737] [0: kworker/u16:1: 64] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 2.876819] [0: kworker/u16:1: 64] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)<6>[ 2.897801] [0: khubd: 63] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b<6>[ 2.897831] [0: khubd: 63] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0<6>[ 2.897847] [0: khubd: 63] usb 1-1.4: Product: USB Receiver<6>[ 2.897863] [0: khubd: 63] usb 1-1.4: Manufacturer: Logitech<3>[ 2.900931] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.900969] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<3>[ 2.903667] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.903719] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<6>[ 2.907894] [0: khubd: 63] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-ff500000.usb-1.4/input2<3>[ 2.908342] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.908377] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<3>[ 2.908782] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.908810] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<6>[ 2.910646] [0: kworker/0:1: 50] input: Logitech Unifying Device. Wireless PID:4024 as /devices/ff500000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/input/input2<6>[ 2.911203] [0: kworker/0:1: 50] keychord: using input dev Logitech Unifying Device. Wireless PID:4024 for fevent<6>[ 2.911371] [0: kworker/0:1: 50] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-ff500000.usb-1.4:1<3>[ 2.911755] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.911784] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<6>[ 2.913397] [0: kworker/0:1: 50] input: Logitech Unifying Device. Wireless PID:4024 as /devices/ff500000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/input/input3<6>[ 2.913701] [0: kworker/0:1: 50] keychord: using input dev Logitech Unifying Device. Wireless PID:4024 for fevent<6>[ 2.913855] [0: kworker/0:1: 50] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-ff500000.usb-1.4:2<3>[ 2.914193] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.914224] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<6>[ 2.926489] [0: kworker/u16:1: 64] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 50000000Hz, actual 37500000HZ div = 2)<4>[ 2.926536] [0: kworker/u16:1: 64] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]<4>[ 2.926553] [0: kworker/u16:1: 64] rk_sdmmc: ERROR dw_mci_setup_bus: div SHOULD NOT LARGER THAN ONE! [mmc2]<4>[ 2.926568] [0: kworker/u16:1: 64] rk_sdmmc: BOOT dw_mci_setup_bus: workaround div = 1, host->bus_hz = 75000000 [mmc2]<4>[ 2.926648] [0: kworker/u16:1: 64] rk_sdmmc: BOOT Bus speed=37500000Hz,Bus width=4bits.[mmc2]<6>[ 2.928657] [0: kworker/u16:1: 64] mmc2: new high speed SDIO card at address 0001<3>[ 2.929622] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.929658] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<3>[ 2.930209] [0: kworker/u16:1: 64] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.930244] [0: kworker/u16:1: 64] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 2.946139] [0:wifi_init_threa: 143] bcmsdh_register: register client driver<4>[ 2.946338] [0:wifi_init_threa: 143] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<3>[ 2.946637] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2.946667] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 2.946741] [0:wifi_init_threa: 143] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter<4>[ 2.946758] [0:wifi_init_threa: 143] bus num (host idx)=2, slot num (rca)=1<4>[ 2.946772] [0:wifi_init_threa: 143] found adapter info 'DHD generic adapter'<4>[ 2.947065] [0:wifi_init_threa: 143] F1 signature read @0x18000000=0x16044330<4>[ 2.948871] [0:wifi_init_threa: 143] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 2.949191] [0:wifi_init_threa: 143] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 2.949378] [0:wifi_init_threa: 143] wifi_platform_get_mac_addr<4>[ 2.949394] [0:wifi_init_threa: 143] ======== bcm_wlan_get_mac_address ========<6>[ 2.949408] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.<6>[ 2.949427] [0:wifi_init_threa: 143] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]<6>[ 2.949441] [0:wifi_init_threa: 143] [WLAN_RFKILL]: This mac address is not valid, ignored...<4>[ 2.949459] [0:wifi_init_threa: 143] dhd_conf_set_chiprev: chip=0x4330, chiprev=4<4>[ 2.949515] [0:wifi_init_threa: 143] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt<4>[ 2.950607] [0:wifi_init_threa: 143] wl_create_event_handler(): thread:wl_event_handler:cb started<4>[ 2.951044] [0:wl_event_handle: 203] tsk Enter, tsk = 0xffffffc07f8c19a0<4>[ 2.951082] [0:wifi_init_threa: 143] dhd_attach(): thread:dhd_watchdog_thread:cc started<4>[ 2.951128] [0:wifi_init_threa: 143] dhd_attach(): thread:dhd_dpc:cd started<4>[ 2.951178] [0: dhd_dpc: 205] dhd_dpc_thread: set dpc_cpucore 0 from config.txt<4>[ 2.951206] [0:wifi_init_threa: 143] dhd_attach(): thread:dhd_rxf:ce started<4>[ 2.951226] [0:wifi_init_threa: 143] dhd_deferred_work_init: work queue initialized <4>[ 2.951325] [0:wifi_init_threa: 143] dhdsdio_probe_init: set use_rxchain 0 from config.txt<4>[ 2.963573] [0:wifi_init_threa: 143] Dongle Host Driver, version 1.201.59.5 (r506368)<4>[ 2.963573] [0:wifi_init_threa: 143] Compiled in drivers/net/wireless/bcmdhd on Feb 21 2016 at 00:10:49<4>[ 2.964859] [0:wifi_init_threa: 143] Register interface [wlan0] MAC: 94:a1:a2:30:34:ef<4>[ 2.964859] [0:wifi_init_threa: 143] <4>[ 2.964954] [0:wifi_init_threa: 143] dhd_prot_ioctl : bus is down. we have nothing to do<4>[ 2.965025] [0:wifi_init_threa: 143] bcmsdh_oob_intr_unregister: Enter<4>[ 2.965059] [0:wifi_init_threa: 143] bcmsdh_oob_intr_unregister: irq is not registered<4>[ 2.965083] [0:wifi_init_threa: 143] dhd_txglom_enable: enable 0<4>[ 2.965102] [0:wifi_init_threa: 143] dhd_bus_devreset: WLAN OFF DONE<4>[ 2.965153] [0:wifi_init_threa: 143] wifi_platform_set_power = 0<4>[ 2.965169] [0:wifi_init_threa: 143] ======== PULL WL_REG_ON LOW! ========<6>[ 2.965183] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_power: 0<6>[ 3.071585] [0:wifi_init_threa: 143] [WLAN_RFKILL]: wifi shut off power.<6>[ 3.071617] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0<6>[ 3.071633] [0:wifi_init_threa: 143] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.<4>[ 3.071712] [0:wifi_init_threa: 143] dhd_module_init: Exit err=0<3>[ 3.072235] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 3.072274] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<6>[ 3.104840] [0: su: 196] warning: `su' uses 32-bit capabilities (legacy support in use)<6>[ 3.127906] [5: toolbox: 213] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<4>[ 3.166958] [0: drmservice: 193] dhd_open: Enter ffffffc07f410000<4>[ 3.166989] [0: drmservice: 193] <4>[ 3.166989] [0: drmservice: 193] Dongle Host Driver, version 1.201.59.5 (r506368)<4>[ 3.166989] [0: drmservice: 193] Compiled in drivers/net/wireless/bcmdhd on Feb 21 2016 at 00:10:49<4>[ 3.167024] [0: drmservice: 193] wl_android_wifi_on in 1<4>[ 3.167038] [0: drmservice: 193] wl_android_wifi_on in 2: g_wifi_on=0<4>[ 3.167051] [0: drmservice: 193] wifi_platform_set_power = 1<4>[ 3.167064] [0: drmservice: 193] ======== PULL WL_REG_ON HIGH! ========<6>[ 3.167078] [0: drmservice: 193] [WLAN_RFKILL]: rockchip_wifi_power: 1<6>[ 3.167093] [0: drmservice: 193] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1<6>[ 3.167106] [0: drmservice: 193] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.<38>[ 3.211373] [3: logd: 173] logd.auditd: start<6>[ 3.219687] [1: su: 212] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<3>[ 3.227523] [0: pvrsrvctl: 176] PVR_K: Compatibility checks: Ignoring fields: 'C' of HW BVNC.<6>[ 3.246297] [1: toolbox: 228] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3.268288] [0: drmservice: 193] [WLAN_RFKILL]: wifi turn on power. 100<11>[ 3.381584] [0: init: 1] init: untracked pid 240 exited with status 0<4>[ 3.475020] [0: drmservice: 193] sdio_reset_comm():<6>[ 3.478055] [0: drmservice: 193] mmc_host mmc2: Bus speed (slot 0) = 75000000Hz (slot req 200000Hz, actual 199468HZ div = 188)<4>[ 3.478077] [0: drmservice: 193] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]<4>[ 3.508820] [0: drmservice: 193] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 3.512095] [0: drmservice: 193] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 3.515174] [1: drmservice: 193] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)<6>[ 3.517917] [0: surfaceflinger: 180] rk3368-lcdc lcdc0: blank mode:0<6>[ 3.517929] [0: surfaceflinger: 180] rk1000 tve exit early resume<4>[ 3.528749] [0: drmservice: 193] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)<6>[ 3.620022] [1: drmservice: 193] mmc_host mmc2: Bus speed (slot 0) = 75000000Hz (slot req 50000000Hz, actual 37500000HZ div = 1)<4>[ 3.620079] [1: drmservice: 193] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]<4>[ 3.620399] [1: drmservice: 193] <4>[ 3.620399] [1: drmservice: 193] <4>[ 3.620399] [1: drmservice: 193] dhd_bus_devreset: == WLAN ON ==<4>[ 3.620503] [1: drmservice: 193] F1 signature read @0x18000000=0x16044330<4>[ 3.622203] [1: drmservice: 193] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 3.622570] [1: drmservice: 193] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 3.622787] [1: drmservice: 193] dhdsdio_probe_init: set use_rxchain 0 from config.txt<4>[ 3.625562] [1: drmservice: 193] dhd_conf_read_config: dhd_doflow = 1<4>[ 3.625603] [1: drmservice: 193] dhd_conf_read_config: srl = 15<4>[ 3.625620] [1: drmservice: 193] dhd_conf_read_config: lrl = 15<4>[ 3.625713] [1: drmservice: 193] dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_RK903_ag.bin<4>[ 3.625727] [1: drmservice: 193] Final fw_path=/system/etc/firmware/fw_RK903_ag.bin<4>[ 3.625739] [1: drmservice: 193] Final nv_path=/system/etc/firmware/nvram_AP6330.txt<4>[ 3.625752] [1: drmservice: 193] Final conf_path=/system/etc/firmware/config.txt<4>[ 3.659596] [0: drmservice: 193] NVRAM version: AP6330_NVRAM_V1.0_20121130
- <4>[ 3.660336] [0: drmservice: 193] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.<11>[ 3.696845] [1: healthd: 174] healthd: No charger supplies found<12>[ 3.696909] [1: healthd: 174] healthd: No battery devices found<4>[ 3.925078] [0: drmservice: 193] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)<4>[ 3.925210] [0: drmservice: 193] bcmsdh_oob_intr_register: Enter<4>[ 3.925229] [0: drmservice: 193] bcmsdh_oob_intr_register: HW_OOB enabled<4>[ 3.925242] [0: drmservice: 193] bcmsdh_oob_intr_register OOB irq=6 flags=4<4>[ 3.925349] [0: drmservice: 193] bcmsdh_oob_intr_register: enable_irq_wake<4>[ 3.926358] [0: drmservice: 193] dhd_conf_set_band: Set band 0<4>[ 3.926569] [0: drmservice: 193] dhd_preinit_ioctls: Set tcpack_sup_mode 0<4>[ 3.926605] [0: drmservice: 193] wifi_platform_get_mac_addr<4>[ 3.926621] [0: drmservice: 193] ======== bcm_wlan_get_mac_address ========<6>[ 3.926634] [0: drmservice: 193] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.<6>[ 3.926655] [0: drmservice: 193] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]<6>[ 3.926671] [0: drmservice: 193] [WLAN_RFKILL]: This mac address is not valid, ignored...<4>[ 3.929619] [0: drmservice: 193] Firmware up: op_mode=0x0005, MAC=94:a1:a2:30:34:ef<4>[ 3.929915] [0: drmservice: 193] dhd_conf_set_country: Set country ALL, revision 0<4>[ 3.996359] [0: drmservice: 193] Country code: ALL (ALL/0)<4>[ 3.996681] [0: drmservice: 193] dhd_conf_set_roam: Set roam_off 1<4>[ 3.997739] [0: drmservice: 193] dhd_conf_set_srl: set srl 15<4>[ 3.997906] [0: drmservice: 193] dhd_conf_set_lrl: set lrl 15<4>[ 4.000663] [0: drmservice: 193] dhd_preinit_ioctls buf_key_b4_m4 set failed -23<4>[ 4.006929] [0: drmservice: 193] Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5<4>[ 4.006956] [0: drmservice: 193] Driver: 1.201.59.5 (r506368)<4>[ 4.006956] [0: drmservice: 193] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 <4>[ 4.007207] [0: drmservice: 193] dhd_txglom_enable: enable 0<4>[ 4.007225] [0: drmservice: 193] dhd_conf_set_disable_proptx: set disable_proptx 1<4>[ 4.012626] [0: drmservice: 193] dhd_preinit_ioctls wl ampdu_hostreorder failed -23<4>[ 4.013080] [0: drmservice: 193] wl_android_wifi_on: Success<4>[ 4.094871] [0: drmservice: 193] dhd_set_scb_probe: GET max_scb_probe failed<4>[ 4.095304] [0: drmservice: 193] dhd_set_scb_probe: max_scb_probe setting failed<4>[ 4.095336] [0: drmservice: 193] dhd_open: Exit ret=0<4>[ 4.194843] [0: drmservice: 193] dhd_stop: Enter ffffffc07f410000<4>[ 4.204682] [0: drmservice: 193] wl_android_wifi_off in 1<4>[ 4.204709] [0: drmservice: 193] wl_android_wifi_off in 2: g_wifi_on=1<4>[ 4.204969] I[0: netd: 376] dhdsdio_isr : bus is down. we have nothing to do<4>[ 4.204997] [0: drmservice: 193] bcmsdh_oob_intr_unregister: Enter<4>[ 4.205026] [0: drmservice: 193] dhd_txglom_enable: enable 0<4>[ 4.205039] [0: drmservice: 193] dhd_bus_devreset: WLAN OFF DONE<4>[ 4.205081] [0: drmservice: 193] wifi_platform_set_power = 0<4>[ 4.205095] [0: drmservice: 193] ======== PULL WL_REG_ON LOW! ========<6>[ 4.205109] [0: drmservice: 193] [WLAN_RFKILL]: rockchip_wifi_power: 0<6>[ 4.311441] [0: drmservice: 193] [WLAN_RFKILL]: wifi shut off power.<6>[ 4.311474] [0: drmservice: 193] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0<6>[ 4.311488] [0: drmservice: 193] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.<4>[ 4.311502] [0: drmservice: 193] wl_android_wifi_off out<4>[ 4.311515] [0: drmservice: 193] dhd_stop: Exit<4>[ 8.502326] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 8.502368] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 8.502385] [0: mediaserver: 195] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 8.502662] [0: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 8.502749] [0: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 8.502770] [0: mediaserver: 195] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 8.502849] [0: mediaserver: 195] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: OV5640) register success<4>[ 8.508194] [0: mediaserver: 195] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 8.510463] [0: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 8.510656] [0: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 8.510693] [0: mediaserver: 195] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 8.511811] [0: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 8.513218] [0: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 8.515152] [0: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 8.709864] [0: mediaserver: 195] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 8.709896] [0: mediaserver: 195] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!<4>[ 8.710022] [0: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 8.710044] [0: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 8.710139] [0: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 8.711334] [0: mediaserver: 195] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 8.711393] [0: mediaserver: 195] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 8.713484] [0: mediaserver: 195] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success<4>[ 8.713521] [0: mediaserver: 195] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 8.713543] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 8.713559] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 8.713575] [0: mediaserver: 195] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 8.715516] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 8.715548] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 8.715565] [0: mediaserver: 195] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 8.715699] [0: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 8.715722] [0: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 8.715740] [0: mediaserver: 195] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 8.715762] [0: mediaserver: 195] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: SP2518) register success<4>[ 8.720850] [0: mediaserver: 195] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 8.720879] [0: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 8.720992] [0: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 8.721036] [0: mediaserver: 195] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 8.722135] [0: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 8.723239] [0: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 8.724349] [0: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 8.916473] [0: mediaserver: 195] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 8.916507] [0: mediaserver: 195] E:camsys_i2c_write(78): i2c write dev(addr:0x60) failed!<4>[ 8.916638] [0: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 8.916656] [0: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 8.916677] [0: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 8.917826] [0: mediaserver: 195] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 8.917890] [0: mediaserver: 195] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 8.920007] [0: mediaserver: 195] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success<4>[ 8.920045] [0: mediaserver: 195] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 8.920067] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 8.920083] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 8.920099] [0: mediaserver: 195] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<6>[ 9.891861] [0: kworker/0:2: 355] [otg id chg] last id -1 current id 67108864<12>[ 30.140511] [0: healthd: 174] healthd: battery none chg=<6>[ 30.448304] [0: lmkd: 175] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:<6>[ 30.448337] [0: lmkd: 175] lowmemorykiller: oom_adj 0 => oom_score_adj 0<6>[ 30.448351] [0: lmkd: 175] lowmemorykiller: oom_adj 1 => oom_score_adj 58<6>[ 30.448365] [0: lmkd: 175] lowmemorykiller: oom_adj 2 => oom_score_adj 117<6>[ 30.448379] [0: lmkd: 175] lowmemorykiller: oom_adj 3 => oom_score_adj 176<6>[ 30.448393] [0: lmkd: 175] lowmemorykiller: oom_adj 9 => oom_score_adj 529<6>[ 30.448407] [0: lmkd: 175] lowmemorykiller: oom_adj 15 => oom_score_adj 1000<6>[ 72.877514] [7: system_server: 492] acc_open<6>[ 72.877551] [7: system_server: 492] acc_release<4>[ 73.124289] [0: netd: 475] phy_power_on: enable = 1 <4>[ 73.165706] [6: netd: 475] eth0: device MAC address 94:a1:a2:30:34:e1<6>[ 73.170324] [6: netd: 475] libphy: stmmac: probed<6>[ 73.170345] [6: netd: 475] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active<6>[ 73.170363] [6: netd: 475] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active<3>[ 73.170844] [0: kworker/u16:2: 133] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 73.170881] [0: kworker/u16:2: 133] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 76.255408] [5:UsbService host: 945] ff580000.usb resume, HPRT0:0x1000<4>[ 76.255625] [5:UsbService host: 945] ff580000.usb suspend, HPRT0:0x1000<4>[ 78.145461] [0: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.145504] [0: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.145519] [0: Binder_3: 1140] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 78.146188] [1: Binder_3: 1140] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 78.146228] [1: Binder_3: 1140] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 78.146244] [1: Binder_3: 1140] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 78.146266] [1: Binder_3: 1140] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: OV5640) register success<4>[ 78.157043] [1: Binder_3: 1140] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 78.157084] [1: Binder_3: 1140] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 78.157201] [1: Binder_3: 1140] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 78.157275] [1: Binder_3: 1140] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 78.158779] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 78.160109] [1: Binder_3: 1140] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.162003] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 78.357335] [0: Binder_3: 1140] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 78.357372] [0: Binder_3: 1140] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!<4>[ 78.357509] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 78.357525] [0: Binder_3: 1140] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.357547] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 78.359957] [1: Binder_3: 1140] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 78.360028] [1: Binder_3: 1140] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 78.362156] [1: Binder_3: 1140] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success<4>[ 78.362206] [1: Binder_3: 1140] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 78.362238] [1: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 78.362253] [1: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 78.362270] [1: Binder_3: 1140] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 78.363140] [1: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.363180] [1: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.363197] [1: Binder_3: 1140] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 78.363369] [1: Binder_3: 1140] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 78.363403] [1: Binder_3: 1140] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 78.363423] [1: Binder_3: 1140] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 78.363448] [1: Binder_3: 1140] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: SP2518) register success<4>[ 78.368683] [0: Binder_3: 1140] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 78.368714] [0: Binder_3: 1140] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 78.368827] [0: Binder_3: 1140] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 78.368878] [0: Binder_3: 1140] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 78.370043] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 78.371169] [0: Binder_3: 1140] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.372329] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 78.564141] [0: Binder_3: 1140] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 78.564180] [0: Binder_3: 1140] E:camsys_i2c_write(78): i2c write dev(addr:0x60) failed!<4>[ 78.564871] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 78.565528] [0: Binder_3: 1140] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.565576] [0: Binder_3: 1140] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 78.569875] [0: Binder_3: 1140] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 78.569953] [0: Binder_3: 1140] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 78.572086] [0: Binder_3: 1140] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success<4>[ 78.572131] [0: Binder_3: 1140] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 78.572152] [0: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 78.572167] [0: Binder_3: 1140] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 78.572182] [0: Binder_3: 1140] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 78.581307] [2: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.581346] [2: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.581369] [2: Binder_1: 490] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 78.581757] [2: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 78.581803] [2: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 78.581823] [2: Binder_1: 490] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 78.581848] [2: Binder_1: 490] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: OV5640) register success<4>[ 78.587000] [1: Binder_1: 490] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 78.587033] [1: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 78.587192] [1: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 78.587247] [1: Binder_1: 490] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 78.588612] [0: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 78.589881] [1: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.591117] [1: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 78.780453] [0: Binder_1: 490] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 78.780489] [0: Binder_1: 490] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!<4>[ 78.780630] [0: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 78.780650] [0: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.780672] [0: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 78.785652] [0: Binder_1: 490] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 78.785765] [0: Binder_1: 490] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 78.787873] [1: Binder_1: 490] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success<4>[ 78.787917] [1: Binder_1: 490] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 78.787943] [1: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 78.787958] [1: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 78.787974] [1: Binder_1: 490] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 78.788799] [1: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.788833] [1: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 78.788850] [1: Binder_1: 490] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 78.788998] [1: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 78.789027] [1: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 78.789044] [1: Binder_1: 490] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 78.789069] [1: Binder_1: 490] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: SP2518) register success<4>[ 78.794182] [0: Binder_1: 490] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 78.794215] [0: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 78.794328] [0: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 78.794379] [0: Binder_1: 490] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 78.795528] [0: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 78.796661] [1: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.797830] [1: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 78.987122] [1: Binder_1: 490] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 78.987160] [1: Binder_1: 490] E:camsys_i2c_write(78): i2c write dev(addr:0x60) failed!<4>[ 78.987296] [1: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 78.987315] [1: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 78.987336] [1: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 78.994988] [0: Binder_1: 490] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 78.995064] [0: Binder_1: 490] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 79.001228] [0: Binder_1: 490] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success<4>[ 79.004642] [0: Binder_1: 490] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 79.004669] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 79.004684] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 79.004699] [0: Binder_1: 490] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 84.800880] [1:droid.bluetooth: 1943] Current WiFi chip is AP6330.<4>[ 85.457769] [3:BluetoothAdapte: 2019] Current WiFi chip is AP6330.<4>[ 85.474667] [0:BluetoothAdapte: 2019] Current WiFi chip is AP6330.<6>[ 85.501192] [0:BluetoothAdapte: 2019] [BT_RFKILL]: bt shut off power<6>[ 86.111863] [1:BluetoothAdapte: 2019] [BT_RFKILL]: bt turn on power<4>[ 86.841964] [0: bt_hc_worker: 2091] Current WiFi chip is AP6330.<6>[ 88.572124] [0:BT Service Call: 2022] [BT_RFKILL]: bt shut off power<11>[ 91.014792] [0: init: 1] init: untracked pid 2541 exited with status 0<4>[ 91.032472] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 91.032513] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 91.032531] [0: Binder_4: 1371] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 91.032720] [0: Binder_4: 1371] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 91.032755] [0: Binder_4: 1371] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 91.032779] [0: Binder_4: 1371] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 91.032809] [0: Binder_4: 1371] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: OV5640) register success<4>[ 91.037908] [0: Binder_4: 1371] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 91.037931] [0: Binder_4: 1371] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 91.038044] [0: Binder_4: 1371] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 91.038098] [0: Binder_4: 1371] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 91.039204] [0: Binder_4: 1371] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<11>[ 91.039455] [0: init: 1] init: untracked pid 2548 exited with status 0<3>[ 91.040308] [0: Binder_4: 1371] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 91.041902] [0: Binder_4: 1371] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<11>[ 91.077248] [0: init: 1] init: untracked pid 2556 exited with status 0<3>[ 91.237925] [0: Binder_4: 1371] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 91.237964] [0: Binder_4: 1371] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!<4>[ 91.238086] [0: Binder_4: 1371] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 91.238104] [0: Binder_4: 1371] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 91.238127] [0: Binder_4: 1371] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 91.239758] [0: Binder_4: 1371] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 91.239822] [0: Binder_4: 1371] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 91.241923] [0: Binder_4: 1371] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success<4>[ 91.241961] [0: Binder_4: 1371] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 91.241985] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 91.242000] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 91.242017] [0: Binder_4: 1371] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 91.242711] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 91.242735] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 91.242752] [0: Binder_4: 1371] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 91.242876] [0: Binder_4: 1371] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 91.242899] [0: Binder_4: 1371] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 91.242917] [0: Binder_4: 1371] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 91.242939] [0: Binder_4: 1371] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: SP2518) register success<4>[ 91.248544] [0: Binder_4: 1371] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 91.248578] [0: Binder_4: 1371] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 91.248692] [0: Binder_4: 1371] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 91.248746] [0: Binder_4: 1371] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 91.250312] [0: Binder_4: 1371] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 91.252502] [0: Binder_4: 1371] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 91.253603] [0: Binder_4: 1371] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 91.444626] [1: Binder_4: 1371] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 91.444662] [1: Binder_4: 1371] E:camsys_i2c_write(78): i2c write dev(addr:0x60) failed!<4>[ 91.444794] [1: Binder_4: 1371] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 91.444812] [1: Binder_4: 1371] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 91.444834] [1: Binder_4: 1371] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 91.447937] [0: Binder_4: 1371] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 91.447995] [0: Binder_4: 1371] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 91.450098] [0: Binder_4: 1371] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success<4>[ 91.450141] [0: Binder_4: 1371] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 91.450164] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 91.450180] [0: Binder_4: 1371] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 91.450198] [0: Binder_4: 1371] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<11>[ 96.101480] [0: init: 1] init: untracked pid 2876 exited with status 0<11>[ 97.065229] [1: init: 1] init: untracked pid 2544 exited with status 0<11>[ 97.072529] [0: init: 1] init: untracked pid 2551 exited with status 0<11>[ 97.076656] [0: init: 1] init: untracked pid 2559 exited with status 0<11>[ 98.599773] [0: init: 1] init: untracked pid 2879 exited with status 0<4>[ 209.408603] [6: Thread-298: 3157] force_usb_mode_store 1->2<4>[ 209.408648] [6: Thread-298: 3157] PortPower off<4>[ 209.408677] [6: Thread-298: 3157] rk_battery_charger_detect_cb , battery_charger_detect 6<4>[ 209.606553] [6: Thread-298: 3157] Using Buffer DMA mode<4>[ 209.606588] [6: Thread-298: 3157] Periodic Transfer Interrupt Enhancement - disabled<4>[ 209.606615] [6: Thread-298: 3157] Multiprocessor Interrupt Enhancement - disabled<4>[ 209.606644] [6: Thread-298: 3157] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 209.606670] [6: Thread-298: 3157] ^^^^^^^^^^^^^^^^^Device Mode<4>[ 209.898441] [6: kworker/6:1: 54] ***************vbus detect*****************<4>[ 209.901017] [6: kworker/6:1: 54] rk_battery_charger_detect_cb , battery_charger_detect 1<4>[ 210.075660] [6: kworker/6:1: 54] Using Buffer DMA mode<4>[ 210.075676] [6: kworker/6:1: 54] Periodic Transfer Interrupt Enhancement - disabled<4>[ 210.075688] [6: kworker/6:1: 54] Multiprocessor Interrupt Enhancement - disabled<4>[ 210.075703] [6: kworker/6:1: 54] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 210.075721] [6: kworker/6:1: 54] ^^^^^^^^^^^^^^^^^Device Mode<4>[ 210.075766] [6: kworker/6:1: 54] *******************soft connect!!!*******************<4>[ 210.180262] I[0: swapper/0: 0] USB RESET<6>[ 210.209504] [0: kworker/0:2: 355] android_work: sent uevent USB_STATE=CONNECTED<6>[ 210.358364] I[0: swapper/0: 0] android_usb gadget: high-speed config #1: android<6>[ 210.358635] [0: kworker/0:2: 355] android_work: sent uevent USB_STATE=CONFIGURED<4>[ 262.874190] [0: netd: 475] Current WiFi chip is AP6330.<4>[ 262.874340] [0: netd: 475] Current WiFi chip is AP6330.<4>[ 262.881947] [0:WifiStateMachin: 742] Current WiFi chip is AP6330.<4>[ 262.957521] [5: wpa_supplicant: 3320] dhd_open: Enter ffffffc07f410000<4>[ 262.957565] [5: wpa_supplicant: 3320] <4>[ 262.957565] [5: wpa_supplicant: 3320] Dongle Host Driver, version 1.201.59.5 (r506368)<4>[ 262.957565] [5: wpa_supplicant: 3320] Compiled in drivers/net/wireless/bcmdhd on Feb 21 2016 at 00:10:49<4>[ 262.957626] [5: wpa_supplicant: 3320] wl_android_wifi_on in 1<4>[ 262.957649] [5: wpa_supplicant: 3320] wl_android_wifi_on in 2: g_wifi_on=0<4>[ 262.957672] [5: wpa_supplicant: 3320] wifi_platform_set_power = 1<4>[ 262.957694] [5: wpa_supplicant: 3320] ======== PULL WL_REG_ON HIGH! ========<6>[ 262.957718] [5: wpa_supplicant: 3320] [WLAN_RFKILL]: rockchip_wifi_power: 1<6>[ 262.957742] [5: wpa_supplicant: 3320] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1<6>[ 262.957766] [5: wpa_supplicant: 3320] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.<6>[ 263.063954] [5: wpa_supplicant: 3320] [WLAN_RFKILL]: wifi turn on power. 100<4>[ 263.271778] [1: wpa_supplicant: 3320] sdio_reset_comm():<6>[ 263.275503] [0: wpa_supplicant: 3320] mmc_host mmc2: Bus speed (slot 0) = 75000000Hz (slot req 200000Hz, actual 199468HZ div = 188)<4>[ 263.275554] [0: wpa_supplicant: 3320] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]<4>[ 263.304183] [0: wpa_supplicant: 3320] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)<4>[ 263.307218] [0: wpa_supplicant: 3320] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 263.333277] [7: wpa_supplicant: 3320] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)<4>[ 263.338749] [7: wpa_supplicant: 3320] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)<6>[ 263.442267] [0: wpa_supplicant: 3320] mmc_host mmc2: Bus speed (slot 0) = 75000000Hz (slot req 50000000Hz, actual 37500000HZ div = 1)<4>[ 263.442338] [0: wpa_supplicant: 3320] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]<4>[ 263.442875] [0: wpa_supplicant: 3320] <4>[ 263.442875] [0: wpa_supplicant: 3320] <4>[ 263.442875] [0: wpa_supplicant: 3320] dhd_bus_devreset: == WLAN ON ==<4>[ 263.443061] [0: wpa_supplicant: 3320] F1 signature read @0x18000000=0x16044330<4>[ 263.445945] [0: wpa_supplicant: 3320] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0<4>[ 263.446770] [0: wpa_supplicant: 3320] DHD: dongle ram size is set to 294912(orig 294912) at 0x0<4>[ 263.447142] [0: wpa_supplicant: 3320] dhdsdio_probe_init: set use_rxchain 0 from config.txt<4>[ 263.447503] [0: wpa_supplicant: 3320] dhd_conf_read_config: dhd_doflow = 1<4>[ 263.447577] [0: wpa_supplicant: 3320] dhd_conf_read_config: srl = 15<4>[ 263.447614] [0: wpa_supplicant: 3320] dhd_conf_read_config: lrl = 15<4>[ 263.447865] [0: wpa_supplicant: 3320] dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_RK903b2.bin<4>[ 263.447902] [0: wpa_supplicant: 3320] Final fw_path=/system/etc/firmware/fw_RK903b2.bin<4>[ 263.447930] [0: wpa_supplicant: 3320] Final nv_path=/system/etc/firmware/nvram_AP6330.txt<4>[ 263.447956] [0: wpa_supplicant: 3320] Final conf_path=/system/etc/firmware/config.txt<4>[ 263.488627] [0: wpa_supplicant: 3320] NVRAM version: AP6330_NVRAM_V1.0_20121130
- <4>[ 263.489392] [0: wpa_supplicant: 3320] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.<4>[ 263.655650] [6: wpa_supplicant: 3320] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)<4>[ 263.655769] [6: wpa_supplicant: 3320] bcmsdh_oob_intr_register: Enter<4>[ 263.655785] [6: wpa_supplicant: 3320] bcmsdh_oob_intr_register: HW_OOB enabled<4>[ 263.655799] [6: wpa_supplicant: 3320] bcmsdh_oob_intr_register OOB irq=6 flags=4<4>[ 263.655836] [6: wpa_supplicant: 3320] bcmsdh_oob_intr_register: enable_irq_wake<4>[ 263.656462] [6: wpa_supplicant: 3320] dhd_conf_set_band: Set band 0<4>[ 263.656870] [6: wpa_supplicant: 3320] dhd_preinit_ioctls: Set tcpack_sup_mode 0<4>[ 263.656886] I[6: wpa_supplicant: 3320] dhd_tcpack_suppress_set 376: already set to 0<4>[ 263.656907] [6: wpa_supplicant: 3320] wifi_platform_get_mac_addr<4>[ 263.656921] [6: wpa_supplicant: 3320] ======== bcm_wlan_get_mac_address ========<6>[ 263.656935] [6: wpa_supplicant: 3320] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.<6>[ 263.656953] [6: wpa_supplicant: 3320] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]<6>[ 263.656968] [6: wpa_supplicant: 3320] [WLAN_RFKILL]: This mac address is not valid, ignored...<4>[ 263.658564] [6: wpa_supplicant: 3320] Firmware up: op_mode=0x0005, MAC=94:a1:a2:30:34:ef<4>[ 263.658581] [6: wpa_supplicant: 3320] dhd_conf_set_country: Set country ALL, revision 0<4>[ 263.725199] [0: wpa_supplicant: 3320] Country code: ALL (ALL/0)<4>[ 263.725580] [0: wpa_supplicant: 3320] dhd_conf_set_roam: Set roam_off 1<4>[ 263.727002] [0: wpa_supplicant: 3320] dhd_conf_set_srl: set srl 15<4>[ 263.727258] [0: wpa_supplicant: 3320] dhd_conf_set_lrl: set lrl 15<4>[ 263.728399] [0: wpa_supplicant: 3320] dhd_preinit_ioctls buf_key_b4_m4 set failed -23<4>[ 263.735314] [0: wpa_supplicant: 3320] Firmware version = wl0: Jul 5 2013 18:00:18 version 5.90.195.89.10 FWID 01-551ad731<4>[ 263.735357] [0: wpa_supplicant: 3320] Driver: 1.201.59.5 (r506368)<4>[ 263.735357] [0: wpa_supplicant: 3320] Firmware: wl0: Jul 5 2013 18:00:18 version 5.90.195.89.10 FWID 01-551ad731 <4>[ 263.735705] [0: wpa_supplicant: 3320] dhd_txglom_enable: enable 0<4>[ 263.735741] [0: wpa_supplicant: 3320] dhd_conf_set_disable_proptx: set disable_proptx 1<4>[ 263.741252] [0: wpa_supplicant: 3320] dhd_preinit_ioctls wl ampdu_hostreorder failed -23<4>[ 263.741810] [0: wpa_supplicant: 3320] wl_android_wifi_on: Success<4>[ 263.815968] [0: wpa_supplicant: 3320] dhd_set_scb_probe: GET max_scb_probe failed<4>[ 263.816491] [0: wpa_supplicant: 3320] dhd_set_scb_probe: max_scb_probe setting failed<4>[ 263.816538] [0: wpa_supplicant: 3320] dhd_open: Exit ret=0<4>[ 264.040626] [0: wpa_supplicant: 3320] Current WiFi chip is AP6330.<4>[ 264.049835] [0: wpa_supplicant: 3320] dhd_pktfilter_offload_set: failed to add pktfilter 102 0 0 0 0xFFFFFF 0x01005E, retcode = -2<4>[ 264.095406] [4: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 286.377635] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 286.377635] [0: wpa_supplicant: 3320] <4>[ 286.748601] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 286.748729] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 286.846284] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 290.686064] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 290.686126] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 290.690006] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 290.690713] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 290.697283] [0: kworker/0:2: 355] cfg80211: Calling CRDA for country: GB<4>[ 292.163548] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 292.163548] [0: wpa_supplicant: 3320] <4>[ 292.530488] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 292.530628] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 292.591927] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 296.472309] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 296.472369] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 296.475693] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 296.475982] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 296.479608] [0: kworker/0:2: 355] cfg80211: Calling CRDA to update world regulatory domain<4>[ 304.423921] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 304.423921] [0: wpa_supplicant: 3320] <4>[ 304.790175] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 304.791636] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 304.883860] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 308.773340] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 308.773395] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 308.776961] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 308.777465] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 308.779775] [0: kworker/0:2: 355] cfg80211: Calling CRDA to update world regulatory domain<4>[ 310.239342] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 310.239342] [0: wpa_supplicant: 3320] <4>[ 310.605383] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 310.606806] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 310.629832] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 312.387773] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 312.389202] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 312.389337] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 312.389372] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 312.393768] [0: kworker/0:2: 355] cfg80211: Calling CRDA for country: GB<4>[ 322.598671] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 322.598671] [0: wpa_supplicant: 3320] <4>[ 322.964638] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 322.966024] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 323.023657] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 326.910171] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 326.910230] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 326.913753] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 326.914494] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 326.916521] [0: kworker/0:2: 355] cfg80211: Calling CRDA to update world regulatory domain<4>[ 328.404513] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 328.404513] [0: wpa_supplicant: 3320] <4>[ 328.771973] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 328.772104] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 328.867607] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 332.716275] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 332.716334] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 332.719471] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 332.720119] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 332.722183] [0: kworker/0:2: 355] cfg80211: Calling CRDA for country: GB<4>[ 340.655128] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 340.655128] [0: wpa_supplicant: 3320] <4>[ 341.021117] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 341.021256] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 341.059979] [1:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 344.968366] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 344.968426] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 344.971510] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 344.971779] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 344.979730] [0: kworker/0:2: 355] cfg80211: Calling CRDA to update world regulatory domain<4>[ 346.450901] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 346.450901] [0: wpa_supplicant: 3320] <4>[ 346.817016] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 346.817149] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 346.906506] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 350.764393] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 350.764451] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 350.767962] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 350.768137] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 350.776284] [0: kworker/0:2: 355] cfg80211: Calling CRDA to update world regulatory domain<4>[ 357.825505] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 357.825505] [0: wpa_supplicant: 3320] <4>[ 358.194087] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 358.195614] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 358.291909] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 362.140366] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DISASSOC_IND<4>[ 362.140428] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 12, reason=2 from 9c:d3:6d:2e:bb:38<4>[ 362.144193] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 362.144723] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<6>[ 362.146658] [0: kworker/0:0: 3402] cfg80211: Calling CRDA for country: GB<4>[ 416.824083] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 416.824083] [0: wpa_supplicant: 3320] <4>[ 417.190350] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 417.190492] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 417.241484] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 417.414818] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 417.423311] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 417.423364] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 417.423924] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<4>[ 417.423975] [0: wpa_supplicant: 3320] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<4>[ 417.428488] [0: wpa_supplicant: 3320] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL<3>[ 417.428547] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 417.645832] [6: dhcpcd: 3426] Error getting the SSID<11>[ 420.420395] [0: init: 1] init: untracked pid 3491 exited with status 0<4>[ 420.426271] [0: ChromiumNet: 1851] Error getting the SSID<4>[ 420.427783] [1: ChromiumNet: 1851] Error getting the SSID<6>[ 421.460773] [5: mount: 3602] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<11>[ 421.461709] [0: init: 1] init: untracked pid 3600 exited with status 0<11>[ 421.483622] [0: init: 1] init: untracked pid 3608 exited with status 0<11>[ 421.519542] [0: init: 1] init: untracked pid 3618 exited with status 0<11>[ 421.541509] [0: init: 1] init: untracked pid 3494 exited with status 0<6>[ 421.569100] [6: mount: 3636] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<11>[ 421.575320] [0: init: 1] init: untracked pid 3634 exited with status 0<11>[ 422.021937] [0: init: 1] init: untracked pid 3603 exited with status 0<11>[ 422.049046] [0: init: 1] init: untracked pid 3611 exited with status 0<11>[ 422.065051] [0: init: 1] init: untracked pid 3621 exited with status 0<11>[ 422.110183] [0: init: 1] init: untracked pid 3637 exited with status 0<4>[ 440.744854] [0: kworker/u16:0: 6] hdmi remove from lcdc0<6>[ 440.744904] [0: kworker/u16:0: 6] switch:en=0,lcdc_id=0,screen type=6,cur type=6<6>[ 441.041058] [0: kworker/u16:0: 6] hdmi output corlor mode is 3<4>[ 441.041114] [0: kworker/u16:0: 6] hdmi connect to lcdc0<6>[ 441.041143] [0: kworker/u16:0: 6] switch:en=1,lcdc_id=0,screen type=6,cur type=6<6>[ 441.488214] [7: kworker/u16:0: 6] rk3368-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60 <6>[ 441.488286] [7: kworker/u16:0: 6] pixel clk is 148500000 tmds clk is 148500000<6>[ 441.488333] [7: kworker/u16:0: 6] rockchip-hdmiv2 ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.<6>[ 730.834575] I[2: dhd_rxf: 206] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.<11>[ 785.415696] [0: init: 1] init: untracked pid 4192 exited with status 1<11>[ 785.452026] [0: init: 1] init: untracked pid 4199 exited with status 255<11>[ 785.482926] [0: init: 1] init: untracked pid 4206 exited with status 0<11>[ 785.531900] [0: init: 1] init: untracked pid 4213 exited with status 0<11>[ 785.616377] [0: init: 1] init: untracked pid 4220 exited with status 0<11>[ 785.685182] [0: init: 1] init: untracked pid 4227 exited with status 0<11>[ 785.722598] [0: init: 1] init: untracked pid 4248 exited with status 0<11>[ 785.983417] [0: init: 1] init: untracked pid 4269 exited with status 0<11>[ 786.039770] [0: init: 1] init: untracked pid 4195 exited with status 0<11>[ 786.068508] [0: init: 1] init: untracked pid 4202 exited with status 0<11>[ 786.114894] [0: init: 1] init: untracked pid 4216 exited with status 0<11>[ 786.115503] [0: init: 1] init: untracked pid 4209 exited with status 0<11>[ 786.205604] [0: init: 1] init: untracked pid 4223 exited with status 0<11>[ 786.213396] [0: init: 1] init: untracked pid 4377 exited with status 1<11>[ 786.247711] [0: init: 1] init: untracked pid 4237 exited with status 0<11>[ 786.251888] [0: init: 1] init: untracked pid 4384 exited with status 255<11>[ 786.284016] [0: init: 1] init: untracked pid 4391 exited with status 0<11>[ 786.299866] [0: init: 1] init: untracked pid 4258 exited with status 0<11>[ 786.315484] [0: init: 1] init: untracked pid 4279 exited with status 0<11>[ 786.329334] [0: init: 1] init: untracked pid 4398 exited with status 255<11>[ 786.403341] [0: init: 1] init: untracked pid 4405 exited with status 0<11>[ 786.482419] [0: init: 1] init: untracked pid 4412 exited with status 0<11>[ 786.539820] [0: init: 1] init: untracked pid 4426 exited with status 0<11>[ 786.577019] [0: init: 1] init: untracked pid 4458 exited with status 0<11>[ 786.656875] [1: init: 1] init: untracked pid 4489 exited with status 0<11>[ 786.838316] [0: init: 1] init: untracked pid 4380 exited with status 0<11>[ 786.856495] [0: init: 1] init: untracked pid 4394 exited with status 0<11>[ 786.867463] [0: init: 1] init: untracked pid 4502 exited with status 0<11>[ 786.898326] [0: init: 1] init: untracked pid 4401 exited with status 0<11>[ 786.899566] [0: init: 1] init: untracked pid 4387 exited with status 0<11>[ 787.083202] [0: init: 1] init: untracked pid 4408 exited with status 0<11>[ 787.146308] [0: init: 1] init: untracked pid 4415 exited with status 0<11>[ 787.168890] [0: init: 1] init: untracked pid 4431 exited with status 0<11>[ 787.196623] [0: init: 1] init: untracked pid 4472 exited with status 0<11>[ 787.234414] [0: init: 1] init: untracked pid 4496 exited with status 0<11>[ 787.263556] [0: init: 1] init: untracked pid 4511 exited with status 0<11>[ 789.433001] [0: init: 1] init: untracked pid 4552 exited with status 0<11>[ 789.434200] [0: init: 1] init: untracked pid 4608 exited with status 0<11>[ 789.471198] [0: init: 1] init: untracked pid 4615 exited with status 1<11>[ 789.950206] [0: init: 1] init: untracked pid 4611 exited with status 0<11>[ 789.967242] [0: init: 1] init: untracked pid 4618 exited with status 0<11>[ 790.384549] [0: init: 1] init: untracked pid 4337 exited with status 0<11>[ 790.384641] [0: init: 1] init: untracked pid 4654 exited with status 0<11>[ 790.428093] [0: init: 1] init: untracked pid 4661 exited with status 255<11>[ 790.457524] [0: init: 1] init: untracked pid 4668 exited with status 0<11>[ 790.520413] [0: init: 1] init: untracked pid 4676 exited with status 255<11>[ 790.595454] [0: init: 1] init: untracked pid 4683 exited with status 0<11>[ 790.662752] [0: init: 1] init: untracked pid 4691 exited with status 255<11>[ 790.694100] [0: init: 1] init: untracked pid 4712 exited with status 0<11>[ 790.868151] [0: init: 1] init: untracked pid 4747 exited with status 0<11>[ 791.015836] [0: init: 1] init: untracked pid 4671 exited with status 0<11>[ 791.042174] [0: init: 1] init: untracked pid 4664 exited with status 0<11>[ 791.076279] [0: init: 1] init: untracked pid 4657 exited with status 0<11>[ 791.087462] [0: init: 1] init: untracked pid 4839 exited with status 1<11>[ 791.116242] [0: init: 1] init: untracked pid 4846 exited with status 255<11>[ 791.142702] [0: init: 1] init: untracked pid 4855 exited with status 0<11>[ 791.143897] [0: init: 1] init: untracked pid 4679 exited with status 0<11>[ 791.184375] [0: init: 1] init: untracked pid 4686 exited with status 0<11>[ 791.191577] [0: init: 1] init: untracked pid 4862 exited with status 255<11>[ 791.207833] [0: init: 1] init: untracked pid 4694 exited with status 0<11>[ 791.225990] [0: init: 1] init: untracked pid 4718 exited with status 0<11>[ 791.273905] [0: init: 1] init: untracked pid 4869 exited with status 0<11>[ 791.319455] [0: init: 1] init: untracked pid 4750 exited with status 0<11>[ 791.328257] [0: init: 1] init: untracked pid 4876 exited with status 0<11>[ 791.402909] [0: init: 1] init: untracked pid 4904 exited with status 0<11>[ 791.482378] [0: init: 1] init: untracked pid 4927 exited with status 0<11>[ 791.520976] [0: init: 1] init: untracked pid 4956 exited with status 0<11>[ 791.648095] [0: init: 1] init: untracked pid 4842 exited with status 0<11>[ 791.739481] [0: init: 1] init: untracked pid 4849 exited with status 0<11>[ 791.788642] [0: init: 1] init: untracked pid 4858 exited with status 0<11>[ 791.827180] [0: init: 1] init: untracked pid 4865 exited with status 0<11>[ 791.936267] [0: init: 1] init: untracked pid 4964 exited with status 0<11>[ 791.962783] [0: init: 1] init: untracked pid 4872 exited with status 0<11>[ 792.009957] [0: init: 1] init: untracked pid 4886 exited with status 0<11>[ 792.026265] [0: init: 1] init: untracked pid 4914 exited with status 0<11>[ 792.069507] [0: init: 1] init: untracked pid 4959 exited with status 0<11>[ 792.088988] [0: init: 1] init: untracked pid 4951 exited with status 0<11>[ 792.163721] [0: init: 1] init: untracked pid 4969 exited with status 0<6>[ 848.896360] [5: Binder_4: 5121] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 857.921528] [0: kworker/0:0: 3402] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 857.921633] [0: kworker/0:0: 3402] vcodec_service: done<11>[ 878.109475] [0: init: 1] init: untracked pid 5066 exited with status 0<11>[ 878.110754] [0: init: 1] init: untracked pid 5162 exited with status 0<11>[ 878.148395] [0: init: 1] init: untracked pid 5169 exited with status 1<11>[ 878.630759] [0: init: 1] init: untracked pid 5165 exited with status 0<11>[ 878.651916] [0: init: 1] init: untracked pid 5172 exited with status 0<4>[ 882.857730] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 882.857775] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 882.857804] [0: mediaserver: 195] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 882.858010] [0: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 882.858065] [0: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 882.858099] [0: mediaserver: 195] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 882.858142] [0: mediaserver: 195] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: OV5640) register success<4>[ 882.863280] [0: mediaserver: 195] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 882.863324] [0: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 882.863447] [0: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 882.863511] [0: mediaserver: 195] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 882.864620] [0: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 882.865710] [0: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 882.866811] [0: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 883.062908] [0: mediaserver: 195] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 883.062966] [0: mediaserver: 195] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!<4>[ 883.063165] [0: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 883.063200] [0: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 883.063242] [0: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 883.073429] [1: mediaserver: 195] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 883.073518] [1: mediaserver: 195] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 883.082400] [2: mediaserver: 195] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success<4>[ 883.082452] [2: mediaserver: 195] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 883.082483] [2: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.082510] [2: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.082537] [2: mediaserver: 195] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 883.083491] [2: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 883.083525] [2: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 883.083552] [2: mediaserver: 195] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 883.083733] [2: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 883.083772] [2: mediaserver: 195] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 883.083801] [2: mediaserver: 195] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 883.083836] [2: mediaserver: 195] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: SP2518) register success<4>[ 883.088954] [1: mediaserver: 195] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 883.088997] [1: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 883.089121] [1: mediaserver: 195] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 883.089186] [1: mediaserver: 195] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 883.090288] [1: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 883.091376] [1: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 883.092492] [0: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 883.289044] [1: mediaserver: 195] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 883.289098] [1: mediaserver: 195] E:camsys_i2c_write(78): i2c write dev(addr:0x60) failed!<4>[ 883.289291] [1: mediaserver: 195] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 883.289334] [1: mediaserver: 195] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 883.289376] [1: mediaserver: 195] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 883.290520] [0: mediaserver: 195] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 883.290603] [0: mediaserver: 195] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 883.292697] [0: mediaserver: 195] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success<4>[ 883.292747] [0: mediaserver: 195] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 883.292783] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.292813] [0: mediaserver: 195] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.292844] [0: mediaserver: 195] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 883.312044] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 883.312096] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 883.312129] [0: Binder_1: 490] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 883.312354] [0: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 883.312558] [0: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x1000000 success!<4>[ 883.312600] [0: Binder_1: 490] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 883.312650] [0: Binder_1: 490] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: OV5640) register success<4>[ 883.317791] [0: Binder_1: 490] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 883.317840] [0: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 883.317968] [0: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 883.318053] [0: Binder_1: 490] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 883.319175] [0: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 883.320278] [0: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 883.321385] [0: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 883.515350] [0: Binder_1: 490] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 883.515415] [0: Binder_1: 490] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!<4>[ 883.515609] [0: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 883.515861] [0: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 883.515921] [0: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 883.517072] [0: Binder_1: 490] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 883.517161] [0: Binder_1: 490] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 883.519261] [0: Binder_1: 490] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success<4>[ 883.519318] [0: Binder_1: 490] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 883.519364] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.519399] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.519431] [0: Binder_1: 490] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 883.520403] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 883.520452] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on<4>[ 883.520485] [0: Binder_1: 490] D1:camsys_open(739): camsys_marvin(ffffffc0785b4618) is opened!<4>[ 883.520785] [0: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN1_PB4(44) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 883.520972] [0: Binder_1: 490] D1:camsys_extdev_register(243): Get RK30_PIN2_PC1(81) gpio(active: 1) for dev_id 0x2000000 success!<4>[ 883.521014] [0: Binder_1: 490] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp12bit<4>[ 883.521064] [0: Binder_1: 490] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: SP2518) register success<4>[ 883.526177] [0: Binder_1: 490] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on<4>[ 883.526218] [0: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 1<4>[ 883.526346] [0: Binder_1: 490] D1:camsys_rk3368_cfg(269): Isp self soft rst: 0<4>[ 883.526428] [0: Binder_1: 490] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on<4>[ 883.527642] [0: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(81) set 1<3>[ 883.528773] [0: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 883.529898] [0: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(44) set 0<3>[ 883.722071] [1: Binder_1: 490] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)<3>[ 883.722125] [1: Binder_1: 490] E:camsys_i2c_write(78): i2c write dev(addr:0x60) failed!<4>[ 883.722320] [1: Binder_1: 490] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(44) set 1<3>[ 883.722364] [1: Binder_1: 490] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!<4>[ 883.722409] [1: Binder_1: 490] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(81) set 0<4>[ 883.723562] [0: Binder_1: 490] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off<4>[ 883.723659] [0: Binder_1: 490] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off<4>[ 883.726974] [0: Binder_1: 490] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success<4>[ 883.727030] [0: Binder_1: 490] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!<4>[ 883.727068] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.727098] [0: Binder_1: 490] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off<4>[ 883.727130] [0: Binder_1: 490] D1:camsys_release(763): camsys_marvin(ffffffc0785b4618) is closed<4>[ 1150.203114] [6: Thread-317: 6346] force_usb_mode_store 2->1<4>[ 1150.301661] [6: Thread-317: 6346] Using Buffer DMA mode<4>[ 1150.301708] [6: Thread-317: 6346] Periodic Transfer Interrupt Enhancement - disabled<4>[ 1150.301736] [6: Thread-317: 6346] Multiprocessor Interrupt Enhancement - disabled<4>[ 1150.301770] [6: Thread-317: 6346] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 1150.301801] [6: Thread-317: 6346] ^^^^^^^^^^^^^^^^^^Host Mode<6>[ 1150.302021] [6: kworker/6:1: 54] android_work: sent uevent USB_STATE=DISCONNECTED<4>[ 1150.346671] [0: kworker/u16:0: 6] Init: Power Port (0)<4>[ 1150.346717] [0: kworker/u16:0: 6] rk_battery_charger_detect_cb , battery_charger_detect 5<4>[ 1150.346804] [0: kworker/0:0: 3402] ff580000.usb resume, HPRT0:0x1000<4>[ 1150.346935] [0: kworker/0:0: 3402] ff580000.usb suspend, HPRT0:0x1000<4>[ 1151.433296] [6: Thread-318: 6350] force_usb_mode_store 1->2<4>[ 1151.433327] [6: Thread-318: 6350] PortPower off<4>[ 1151.433341] [6: Thread-318: 6350] rk_battery_charger_detect_cb , battery_charger_detect 6<4>[ 1151.631201] [6: Thread-318: 6350] Using Buffer DMA mode<4>[ 1151.631232] [6: Thread-318: 6350] Periodic Transfer Interrupt Enhancement - disabled<4>[ 1151.631262] [6: Thread-318: 6350] Multiprocessor Interrupt Enhancement - disabled<4>[ 1151.631294] [6: Thread-318: 6350] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 1151.631323] [6: Thread-318: 6350] ^^^^^^^^^^^^^^^^^Device Mode<4>[ 1151.920995] [6: kworker/6:1: 54] ***************vbus detect*****************<4>[ 1151.923567] [6: kworker/6:1: 54] rk_battery_charger_detect_cb , battery_charger_detect 1<4>[ 1152.098212] [6: kworker/6:1: 54] Using Buffer DMA mode<4>[ 1152.098227] [6: kworker/6:1: 54] Periodic Transfer Interrupt Enhancement - disabled<4>[ 1152.098247] [6: kworker/6:1: 54] Multiprocessor Interrupt Enhancement - disabled<4>[ 1152.098262] [6: kworker/6:1: 54] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 1152.098279] [6: kworker/6:1: 54] ^^^^^^^^^^^^^^^^^Device Mode<4>[ 1152.098326] [6: kworker/6:1: 54] *******************soft connect!!!*******************<4>[ 1152.201610] I[0: swapper/0: 0] USB RESET<6>[ 1152.230441] [0: kworker/0:0: 3402] android_work: sent uevent USB_STATE=CONNECTED<6>[ 1152.270193] I[0:ndroid.systemui: 991] android_usb gadget: high-speed config #1: android<6>[ 1152.270419] [0: kworker/0:0: 3402] android_work: sent uevent USB_STATE=CONFIGURED<4>[ 1253.641181] [4: Thread-324: 6667] force_usb_mode_store 2->1<4>[ 1253.739762] [4: Thread-324: 6667] Using Buffer DMA mode<4>[ 1253.739802] [4: Thread-324: 6667] Periodic Transfer Interrupt Enhancement - disabled<4>[ 1253.739833] [4: Thread-324: 6667] Multiprocessor Interrupt Enhancement - disabled<4>[ 1253.739865] [4: Thread-324: 6667] OTG VER PARAM: 0, OTG VER FLAG: 0<4>[ 1253.739894] [4: Thread-324: 6667] ^^^^^^^^^^^^^^^^^^Host Mode<6>[ 1253.740119] [4: kworker/4:1: 57] android_work: sent uevent USB_STATE=DISCONNECTED<4>[ 1253.784837] [1: kworker/u16:4: 5076] Init: Power Port (0)<4>[ 1253.784886] [1: kworker/u16:4: 5076] rk_battery_charger_detect_cb , battery_charger_detect 5<4>[ 1253.784969] [1: kworker/1:1: 53] ff580000.usb resume, HPRT0:0x1000<4>[ 1253.785134] [1: kworker/1:1: 53] ff580000.usb suspend, HPRT0:0x1000<4>[ 1268.843005] [0: init: 1] pcd_pullup, is_on 0<4>[ 1268.843063] I[0: init: 1] WARN::dwc_otg_handle_mode_mismatch_intr:69: Mode Mismatch Interrupt: currently in Host mode<4>[ 1268.843063] I[0: init: 1] <4>[ 1268.843122] I[0: init: 1] WARN::dwc_otg_handle_mode_mismatch_intr:69: Mode Mismatch Interrupt: currently in Host mode<4>[ 1268.843122] I[0: init: 1] <3>[ 1268.864483] [0: init: 1] android_usb: already disabled<3>[ 1272.157693] [0: init: 1] android_usb: already disabled<3>[ 1272.173084] [0: init: 1] android_usb: already disabled<6>[ 1272.178264] [7: adbd: 6680] read descriptors<6>[ 1272.178318] [7: adbd: 6680] read strings<4>[ 1272.178391] [7: adbd: 6680] pcd_pullup, is_on 1<4>[ 1560.772995] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 1560.939533] [0: kworker/u16:1: 4185] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 1560.939595] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 1560.939754] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 1560.939807] [0: kworker/u16:1: 4185] mmc1: new high speed SDHC card at address 1234<6>[ 1560.941311] [0: kworker/u16:1: 4185] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 1560.943637] [0: kworker/u16:1: 4185] mmcblk1: p1<3>[ 1560.962802] [0: kworker/u16:4: 5076] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 1560.962878] [0: kworker/u16:4: 5076] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<11>[ 1561.673358] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 1628.702072] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 1628.702072] [0: kworker/0:0: 6949] <3>[ 1628.895544] [0: kworker/u16:4: 5076] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 1628.895621] [0: kworker/u16:4: 5076] mmc1: card 1234 removed<4>[ 1628.923500] [1: kworker/u16:4: 5076] 1358..dw_mci_set_ios: no card. [mmc1]<3>[ 1628.929614] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8192) failed<3>[ 1628.929690] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8193) failed<3>[ 1628.929743] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8194) failed<3>[ 1628.929797] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8195) failed<3>[ 1628.929854] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8196) failed<3>[ 1628.929912] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8197) failed<3>[ 1628.929969] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8198) failed<3>[ 1628.930026] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8199) failed<3>[ 1628.930084] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8200) failed<3>[ 1628.930138] [5: Thread-555: 7473] FAT-fs (mmcblk1p1): Directory bread(block 8201) failed<11>[ 1629.899504] [0: init: 1] init: no such service 'fuse_external_sd'<3>[ 1630.884514] [0: vold: 236] FAT-fs (mmcblk1p1): unable to read boot sector to mark fs as dirty<4>[ 1657.891922] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 1657.891922] [0: kworker/0:0: 6949] <6>[ 1658.100481] [0: kworker/u16:1: 4185] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 1658.100532] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 1658.267235] [0: kworker/u16:1: 4185] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 1658.267297] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 1658.267461] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 1658.267515] [0: kworker/u16:1: 4185] mmc1: new high speed SDHC card at address 1234<6>[ 1658.269108] [0: kworker/u16:1: 4185] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 1658.271760] [0: kworker/u16:1: 4185] mmcblk1: p1<3>[ 1658.272965] [0: kworker/u16:4: 5076] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 1658.273032] [0: kworker/u16:4: 5076] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<3>[ 1658.301612] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.301685] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.301743] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, aborting<3>[ 1658.301808] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8192<3>[ 1658.301849] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 0<3>[ 1658.301893] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8193<3>[ 1658.301929] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 1<3>[ 1658.301968] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8194<3>[ 1658.302003] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 2<3>[ 1658.302041] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8195<3>[ 1658.302078] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 3<3>[ 1658.302116] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8196<3>[ 1658.302152] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 4<3>[ 1658.302189] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8197<3>[ 1658.302224] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 5<3>[ 1658.302261] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8198<3>[ 1658.302296] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 6<3>[ 1658.302334] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8199<3>[ 1658.302369] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 7<3>[ 1658.302413] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8200<3>[ 1658.302449] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 8<3>[ 1658.302486] [0: mmcqd/1: 7549] end_request: I/O error, dev mmcblk1, sector 8201<3>[ 1658.302522] [0: mmcqd/1: 7549] Buffer I/O error on device mmcblk1p1, logical block 9<3>[ 1658.302763] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.302826] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.302887] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, aborting<3>[ 1658.304313] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.304394] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.304458] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, aborting<3>[ 1658.304514] [0: vold: 238] FAT-fs (mmcblk1p1): unable to read boot sector<3>[ 1658.318922] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.318996] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.319388] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, aborting<3>[ 1658.319756] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.319822] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, retrying<3>[ 1658.319884] [0: mmcqd/1: 7549] mmcblk1: error -110 sending status command, aborting<4>[ 1658.338385] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 1658.338385] [0: kworker/0:0: 6949] <4>[ 1658.368164] [6: busybox: 7555] [EXFAT] trying to mount...<3>[ 1658.368421] [0: mmcqd/1: 7549] mmcblk1: error -123 sending status command, retrying<3>[ 1658.368470] [0: mmcqd/1: 7549] mmcblk1: error -123 sending status command, retrying<3>[ 1658.368507] [0: mmcqd/1: 7549] mmcblk1: error -123 sending status command, aborting<4>[ 1658.368580] [6: busybox: 7555] ------------[ cut here ]------------<4>[ 1658.368631] [6: busybox: 7555] WARNING: at fs/exfat/exfat_blkdev.c:124 bdev_read+0xa0/0xbc()<4>[ 1658.368661] [6: busybox: 7555] [EXFAT] No bh, device seems wrong or to be ejected.<4>[ 1658.368690] [6: busybox: 7555] Modules linked in:<4>[ 1658.368729] [6: busybox: 7555] CPU: 6 PID: 7555 Comm: busybox Not tainted 3.10.0 #2<0>[ 1658.368759] [6: busybox: 7555] Call trace:<4>[ 1658.368799] [6: busybox: 7555] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1658.368835] [6: busybox: 7555] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1658.368875] [6: busybox: 7555] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1658.368913] [6: busybox: 7555] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1658.368949] [6: busybox: 7555] [<ffffffc0000a22b4>] warn_slowpath_fmt+0x4c/0x58<4>[ 1658.368982] [6: busybox: 7555] [<ffffffc000226268>] bdev_read+0x9c/0xbc<4>[ 1658.369019] [6: busybox: 7555] [<ffffffc00021f8a4>] sector_read+0x64/0x88<4>[ 1658.369055] [6: busybox: 7555] [<ffffffc000220044>] ffsMountVol+0x74/0x1b0<4>[ 1658.369088] [6: busybox: 7555] [<ffffffc0002259dc>] FsMountVol+0x34/0x60<4>[ 1658.369123] [6: busybox: 7555] [<ffffffc000223eb8>] exfat_fill_super+0xe0/0x220<4>[ 1658.369160] [6: busybox: 7555] [<ffffffc00014c590>] mount_bdev+0x134/0x1b8<4>[ 1658.369193] [6: busybox: 7555] [<ffffffc000223958>] exfat_fs_mount+0x10/0x1c<4>[ 1658.369229] [6: busybox: 7555] [<ffffffc00014cfd4>] mount_fs+0x78/0x19c<4>[ 1658.369263] [6: busybox: 7555] [<ffffffc000164108>] vfs_kern_mount+0x58/0xd8<4>[ 1658.369297] [6: busybox: 7555] [<ffffffc000166984>] do_mount+0x7cc/0x8a8<4>[ 1658.369332] [6: busybox: 7555] [<ffffffc00018be68>] compat_sys_mount+0x1b4/0x1f8<4>[ 1658.369362] [6: busybox: 7555] ---[ end trace 6caf259234bb42b7 ]---<11>[ 1658.384479] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 1658.533432] [0: kworker/u16:2: 7059] ------------[ cut here ]------------<4>[ 1658.533495] [0: kworker/u16:2: 7059] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1658.533524] [0: kworker/u16:2: 7059] Modules linked in:<4>[ 1658.533556] [0: kworker/u16:2: 7059] CPU: 0 PID: 7059 Comm: kworker/u16:2 Tainted: G W 3.10.0 #2<4>[ 1658.533590] [0: kworker/u16:2: 7059] Workqueue: kmmcd mmc_rescan<0>[ 1658.533614] [0: kworker/u16:2: 7059] Call trace:<4>[ 1658.533648] [0: kworker/u16:2: 7059] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1658.533681] [0: kworker/u16:2: 7059] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1658.533716] [0: kworker/u16:2: 7059] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1658.533751] [0: kworker/u16:2: 7059] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1658.533784] [0: kworker/u16:2: 7059] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1658.533815] [0: kworker/u16:2: 7059] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1658.533847] [0: kworker/u16:2: 7059] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1658.533877] [0: kworker/u16:2: 7059] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1658.533909] [0: kworker/u16:2: 7059] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1658.533942] [0: kworker/u16:2: 7059] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1658.533972] [0: kworker/u16:2: 7059] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1658.534005] [0: kworker/u16:2: 7059] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1658.534036] [0: kworker/u16:2: 7059] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1658.534070] [0: kworker/u16:2: 7059] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1658.534097] [0: kworker/u16:2: 7059] ---[ end trace 6caf259234bb42b8 ]---<4>[ 1658.534129] [0: kworker/u16:2: 7059] ------------[ cut here ]------------<4>[ 1658.534162] [0: kworker/u16:2: 7059] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1658.534188] [0: kworker/u16:2: 7059] Modules linked in:<4>[ 1658.534215] [0: kworker/u16:2: 7059] CPU: 0 PID: 7059 Comm: kworker/u16:2 Tainted: G W 3.10.0 #2<4>[ 1658.534246] [0: kworker/u16:2: 7059] Workqueue: kmmcd mmc_rescan<0>[ 1658.534268] [0: kworker/u16:2: 7059] Call trace:<4>[ 1658.534298] [0: kworker/u16:2: 7059] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1658.534330] [0: kworker/u16:2: 7059] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1658.534362] [0: kworker/u16:2: 7059] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1658.534395] [0: kworker/u16:2: 7059] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1658.534427] [0: kworker/u16:2: 7059] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1658.534459] [0: kworker/u16:2: 7059] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1658.534490] [0: kworker/u16:2: 7059] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1658.534520] [0: kworker/u16:2: 7059] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1658.534551] [0: kworker/u16:2: 7059] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1658.534583] [0: kworker/u16:2: 7059] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1658.534614] [0: kworker/u16:2: 7059] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1658.534644] [0: kworker/u16:2: 7059] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1658.534675] [0: kworker/u16:2: 7059] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1658.534707] [0: kworker/u16:2: 7059] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1658.534733] [0: kworker/u16:2: 7059] ---[ end trace 6caf259234bb42b9 ]---<4>[ 1658.534766] [0: kworker/u16:2: 7059] ------------[ cut here ]------------<4>[ 1658.534797] [0: kworker/u16:2: 7059] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1658.534823] [0: kworker/u16:2: 7059] Modules linked in:<4>[ 1658.534851] [0: kworker/u16:2: 7059] CPU: 0 PID: 7059 Comm: kworker/u16:2 Tainted: G W 3.10.0 #2<4>[ 1658.534881] [0: kworker/u16:2: 7059] Workqueue: kmmcd mmc_rescan<0>[ 1658.534904] [0: kworker/u16:2: 7059] Call trace:<4>[ 1658.534934] [0: kworker/u16:2: 7059] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1658.534966] [0: kworker/u16:2: 7059] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1658.534998] [0: kworker/u16:2: 7059] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1658.535031] [0: kworker/u16:2: 7059] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1658.535064] [0: kworker/u16:2: 7059] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1658.535095] [0: kworker/u16:2: 7059] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1658.535126] [0: kworker/u16:2: 7059] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1658.535156] [0: kworker/u16:2: 7059] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1658.535188] [0: kworker/u16:2: 7059] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1658.535220] [0: kworker/u16:2: 7059] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1658.535251] [0: kworker/u16:2: 7059] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1658.535281] [0: kworker/u16:2: 7059] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1658.535312] [0: kworker/u16:2: 7059] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1658.535344] [0: kworker/u16:2: 7059] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1658.535371] [0: kworker/u16:2: 7059] ---[ end trace 6caf259234bb42ba ]---<4>[ 1658.535402] [0: kworker/u16:2: 7059] ------------[ cut here ]------------<4>[ 1658.535433] [0: kworker/u16:2: 7059] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1658.535460] [0: kworker/u16:2: 7059] Modules linked in:<4>[ 1658.535487] [0: kworker/u16:2: 7059] CPU: 0 PID: 7059 Comm: kworker/u16:2 Tainted: G W 3.10.0 #2<4>[ 1658.535517] [0: kworker/u16:2: 7059] Workqueue: kmmcd mmc_rescan<0>[ 1658.535539] [0: kworker/u16:2: 7059] Call trace:<4>[ 1658.535570] [0: kworker/u16:2: 7059] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1658.535602] [0: kworker/u16:2: 7059] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1658.535634] [0: kworker/u16:2: 7059] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1658.535667] [0: kworker/u16:2: 7059] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1658.535700] [0: kworker/u16:2: 7059] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1658.535731] [0: kworker/u16:2: 7059] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1658.535762] [0: kworker/u16:2: 7059] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1658.535793] [0: kworker/u16:2: 7059] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1658.535824] [0: kworker/u16:2: 7059] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1658.535856] [0: kworker/u16:2: 7059] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1658.535886] [0: kworker/u16:2: 7059] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1658.535917] [0: kworker/u16:2: 7059] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1658.535948] [0: kworker/u16:2: 7059] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1658.535980] [0: kworker/u16:2: 7059] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1658.536007] [0: kworker/u16:2: 7059] ---[ end trace 6caf259234bb42bb ]---<4>[ 1658.536038] [0: kworker/u16:2: 7059] ------------[ cut here ]------------<4>[ 1658.536069] [0: kworker/u16:2: 7059] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1658.536096] [0: kworker/u16:2: 7059] Modules linked in:<4>[ 1658.536123] [0: kworker/u16:2: 7059] CPU: 0 PID: 7059 Comm: kworker/u16:2 Tainted: G W 3.10.0 #2<4>[ 1658.536154] [0: kworker/u16:2: 7059] Workqueue: kmmcd mmc_rescan<0>[ 1658.536176] [0: kworker/u16:2: 7059] Call trace:<4>[ 1658.536206] [0: kworker/u16:2: 7059] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1658.536238] [0: kworker/u16:2: 7059] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1658.536270] [0: kworker/u16:2: 7059] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1658.536303] [0: kworker/u16:2: 7059] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1658.536335] [0: kworker/u16:2: 7059] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1658.536367] [0: kworker/u16:2: 7059] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1658.536398] [0: kworker/u16:2: 7059] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1658.536428] [0: kworker/u16:2: 7059] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1658.536460] [0: kworker/u16:2: 7059] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1658.536491] [0: kworker/u16:2: 7059] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1658.536522] [0: kworker/u16:2: 7059] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1658.536552] [0: kworker/u16:2: 7059] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1658.536583] [0: kworker/u16:2: 7059] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1658.536615] [0: kworker/u16:2: 7059] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1658.536641] [0: kworker/u16:2: 7059] ---[ end trace 6caf259234bb42bc ]---<3>[ 1658.536675] [0: kworker/u16:2: 7059] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 1658.536756] [0: kworker/u16:2: 7059] mmc1: card 1234 removed<4>[ 1658.547056] [0: kworker/u16:2: 7059] 1358..dw_mci_set_ios: no card. [mmc1]<4>[ 1658.952308] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 1658.952308] [0: kworker/0:0: 6949] <6>[ 1659.163324] [0: kworker/u16:2: 7059] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 1659.163379] [0: kworker/u16:2: 7059] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 1659.251417] [0: kworker/u16:2: 7059] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 1659.251477] [0: kworker/u16:2: 7059] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 1659.251633] [0: kworker/u16:2: 7059] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 1659.251721] [0: kworker/u16:2: 7059] mmc1: new high speed SDHC card at address 1234<6>[ 1659.253219] [0: kworker/u16:2: 7059] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 1659.255792] [0: kworker/u16:2: 7059] mmcblk1: p1<3>[ 1659.256997] [0: kworker/u16:2: 7059] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 1659.257064] [0: kworker/u16:2: 7059] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<11>[ 1659.522535] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 1659.950743] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 1659.950743] [0: kworker/0:0: 6949] <3>[ 1660.147239] [0: kworker/u16:2: 7059] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 1660.147352] [0: kworker/u16:2: 7059] mmc1: card 1234 removed<4>[ 1660.150093] [0: kworker/u16:2: 7059] 1358..dw_mci_set_ios: no card. [mmc1]<4>[ 1725.869374] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 1725.869374] [0: kworker/0:0: 6949] <4>[ 1725.989755] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 1725.989755] [0: kworker/0:0: 6949] <4>[ 1726.052316] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 1726.052316] [0: kworker/0:0: 6949] <6>[ 1726.085035] [0: kworker/u16:4: 5076] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 1726.085088] [0: kworker/u16:4: 5076] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 1726.255382] [0: kworker/u16:4: 5076] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 1726.255445] [0: kworker/u16:4: 5076] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 1726.255609] [0: kworker/u16:4: 5076] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 1726.255662] [0: kworker/u16:4: 5076] mmc1: new high speed SDHC card at address 1234<6>[ 1726.257221] [0: kworker/u16:4: 5076] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 1726.263376] [0: kworker/u16:4: 5076] mmcblk1: p1<3>[ 1726.264396] [0: kworker/u16:4: 5076] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 1726.264452] [0: kworker/u16:4: 5076] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<3>[ 1726.359922] I[0: fsck_msdos: 7667] [mmc1] Data transmission error !!!! MINTSTS: [0x00002080]<3>[ 1726.359964] I[0: fsck_msdos: 7667] [mmc1] host was already tuning, Don't need to retry tune again ignore 0.<3>[ 1726.360052] [0: mmcqd/1: 7665] need_retune:0,brq->retune_retry_done:0.<3>[ 1726.360075] [0: mmcqd/1: 7665] mmcblk1: error -84 transferring data, sector 14744, nr 256, cmd response 0x900, card status 0xb00<4>[ 1726.360260] [0: mmcqd/1: 7665] mmcblk1: retrying using single block read<3>[ 1726.409630] I[0: kworker/0:0: 6949] [mmc1] Data transmission error !!!! MINTSTS: [0x00002000]<3>[ 1726.409681] I[0: kworker/0:0: 6949] [mmc1] host was already tuning, Don't need to retry tune again ignore 0.<4>[ 1726.409795] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 1726.409795] [0: kworker/0:0: 6949] <3>[ 1726.409848] I[0: kworker/0:0: 6949] [mmc1] Data transmission error !!!! MINTSTS: [0x00000086]<3>[ 1726.409877] I[0: kworker/0:0: 6949] [mmc1] host was already tuning, Don't need to retry tune again ignore 0.<3>[ 1726.410240] [0: mmcqd/1: 7665] mmcblk1: error -123 sending status command, retrying<3>[ 1726.410281] [0: mmcqd/1: 7665] mmcblk1: error -123 sending status command, retrying<3>[ 1726.410312] [0: mmcqd/1: 7665] mmcblk1: error -123 sending status command, aborting<3>[ 1726.433685] [0: vold: 238] FAT-fs (mmcblk1p1): unable to read boot sector<4>[ 1726.458572] [6: busybox: 7671] [EXFAT] trying to mount...<4>[ 1726.458730] [6: busybox: 7671] ------------[ cut here ]------------<4>[ 1726.458777] [6: busybox: 7671] WARNING: at fs/exfat/exfat_blkdev.c:124 bdev_read+0xa0/0xbc()<4>[ 1726.458807] [6: busybox: 7671] [EXFAT] No bh, device seems wrong or to be ejected.<4>[ 1726.458836] [6: busybox: 7671] Modules linked in:<4>[ 1726.458957] [6: busybox: 7671] CPU: 6 PID: 7671 Comm: busybox Tainted: G W 3.10.0 #2<0>[ 1726.458989] [6: busybox: 7671] Call trace:<4>[ 1726.459028] [6: busybox: 7671] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1726.459064] [6: busybox: 7671] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1726.459102] [6: busybox: 7671] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1726.459140] [6: busybox: 7671] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1726.459175] [6: busybox: 7671] [<ffffffc0000a22b4>] warn_slowpath_fmt+0x4c/0x58<4>[ 1726.459209] [6: busybox: 7671] [<ffffffc000226268>] bdev_read+0x9c/0xbc<4>[ 1726.459245] [6: busybox: 7671] [<ffffffc00021f8a4>] sector_read+0x64/0x88<4>[ 1726.459280] [6: busybox: 7671] [<ffffffc000220044>] ffsMountVol+0x74/0x1b0<4>[ 1726.459313] [6: busybox: 7671] [<ffffffc0002259dc>] FsMountVol+0x34/0x60<4>[ 1726.459347] [6: busybox: 7671] [<ffffffc000223eb8>] exfat_fill_super+0xe0/0x220<4>[ 1726.459384] [6: busybox: 7671] [<ffffffc00014c590>] mount_bdev+0x134/0x1b8<4>[ 1726.459417] [6: busybox: 7671] [<ffffffc000223958>] exfat_fs_mount+0x10/0x1c<4>[ 1726.459452] [6: busybox: 7671] [<ffffffc00014cfd4>] mount_fs+0x78/0x19c<4>[ 1726.459486] [6: busybox: 7671] [<ffffffc000164108>] vfs_kern_mount+0x58/0xd8<4>[ 1726.459520] [6: busybox: 7671] [<ffffffc000166984>] do_mount+0x7cc/0x8a8<4>[ 1726.459555] [6: busybox: 7671] [<ffffffc00018be68>] compat_sys_mount+0x1b4/0x1f8<4>[ 1726.459586] [6: busybox: 7671] ---[ end trace 6caf259234bb42bd ]---<11>[ 1726.474196] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 1726.606511] [0: kworker/u16:1: 4185] ------------[ cut here ]------------<4>[ 1726.606557] [0: kworker/u16:1: 4185] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1726.606575] [0: kworker/u16:1: 4185] Modules linked in:<4>[ 1726.606595] [0: kworker/u16:1: 4185] CPU: 0 PID: 4185 Comm: kworker/u16:1 Tainted: G W 3.10.0 #2<4>[ 1726.606616] [0: kworker/u16:1: 4185] Workqueue: kmmcd mmc_rescan<0>[ 1726.606631] [0: kworker/u16:1: 4185] Call trace:<4>[ 1726.606653] [0: kworker/u16:1: 4185] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1726.606672] [0: kworker/u16:1: 4185] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1726.606694] [0: kworker/u16:1: 4185] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1726.606714] [0: kworker/u16:1: 4185] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1726.606734] [0: kworker/u16:1: 4185] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1726.606753] [0: kworker/u16:1: 4185] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1726.606772] [0: kworker/u16:1: 4185] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1726.606790] [0: kworker/u16:1: 4185] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1726.606809] [0: kworker/u16:1: 4185] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1726.606828] [0: kworker/u16:1: 4185] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1726.606846] [0: kworker/u16:1: 4185] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1726.606867] [0: kworker/u16:1: 4185] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1726.606885] [0: kworker/u16:1: 4185] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1726.606906] [0: kworker/u16:1: 4185] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1726.606923] [0: kworker/u16:1: 4185] ---[ end trace 6caf259234bb42be ]---<4>[ 1726.606944] [0: kworker/u16:1: 4185] ------------[ cut here ]------------<4>[ 1726.606963] [0: kworker/u16:1: 4185] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1726.606979] [0: kworker/u16:1: 4185] Modules linked in:<4>[ 1726.606995] [0: kworker/u16:1: 4185] CPU: 0 PID: 4185 Comm: kworker/u16:1 Tainted: G W 3.10.0 #2<4>[ 1726.607014] [0: kworker/u16:1: 4185] Workqueue: kmmcd mmc_rescan<0>[ 1726.607028] [0: kworker/u16:1: 4185] Call trace:<4>[ 1726.607046] [0: kworker/u16:1: 4185] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1726.607065] [0: kworker/u16:1: 4185] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1726.607084] [0: kworker/u16:1: 4185] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1726.607103] [0: kworker/u16:1: 4185] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1726.607123] [0: kworker/u16:1: 4185] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1726.607141] [0: kworker/u16:1: 4185] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1726.607160] [0: kworker/u16:1: 4185] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1726.607178] [0: kworker/u16:1: 4185] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1726.607197] [0: kworker/u16:1: 4185] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1726.607216] [0: kworker/u16:1: 4185] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1726.607234] [0: kworker/u16:1: 4185] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1726.607253] [0: kworker/u16:1: 4185] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1726.607271] [0: kworker/u16:1: 4185] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1726.607290] [0: kworker/u16:1: 4185] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1726.607306] [0: kworker/u16:1: 4185] ---[ end trace 6caf259234bb42bf ]---<4>[ 1726.607327] [0: kworker/u16:1: 4185] ------------[ cut here ]------------<4>[ 1726.607346] [0: kworker/u16:1: 4185] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1726.607362] [0: kworker/u16:1: 4185] Modules linked in:<4>[ 1726.607379] [0: kworker/u16:1: 4185] CPU: 0 PID: 4185 Comm: kworker/u16:1 Tainted: G W 3.10.0 #2<4>[ 1726.607397] [0: kworker/u16:1: 4185] Workqueue: kmmcd mmc_rescan<0>[ 1726.607411] [0: kworker/u16:1: 4185] Call trace:<4>[ 1726.607428] [0: kworker/u16:1: 4185] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1726.607448] [0: kworker/u16:1: 4185] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1726.607467] [0: kworker/u16:1: 4185] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1726.607486] [0: kworker/u16:1: 4185] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1726.607506] [0: kworker/u16:1: 4185] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1726.607525] [0: kworker/u16:1: 4185] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1726.607544] [0: kworker/u16:1: 4185] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1726.607562] [0: kworker/u16:1: 4185] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1726.607581] [0: kworker/u16:1: 4185] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1726.607600] [0: kworker/u16:1: 4185] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1726.607618] [0: kworker/u16:1: 4185] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1726.607636] [0: kworker/u16:1: 4185] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1726.607655] [0: kworker/u16:1: 4185] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1726.607674] [0: kworker/u16:1: 4185] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1726.607690] [0: kworker/u16:1: 4185] ---[ end trace 6caf259234bb42c0 ]---<4>[ 1726.607711] [0: kworker/u16:1: 4185] ------------[ cut here ]------------<4>[ 1726.607729] [0: kworker/u16:1: 4185] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1726.607745] [0: kworker/u16:1: 4185] Modules linked in:<4>[ 1726.607762] [0: kworker/u16:1: 4185] CPU: 0 PID: 4185 Comm: kworker/u16:1 Tainted: G W 3.10.0 #2<4>[ 1726.607780] [0: kworker/u16:1: 4185] Workqueue: kmmcd mmc_rescan<0>[ 1726.607794] [0: kworker/u16:1: 4185] Call trace:<4>[ 1726.607812] [0: kworker/u16:1: 4185] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1726.607831] [0: kworker/u16:1: 4185] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1726.607850] [0: kworker/u16:1: 4185] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1726.607869] [0: kworker/u16:1: 4185] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1726.607889] [0: kworker/u16:1: 4185] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1726.607908] [0: kworker/u16:1: 4185] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1726.607926] [0: kworker/u16:1: 4185] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1726.607945] [0: kworker/u16:1: 4185] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1726.607963] [0: kworker/u16:1: 4185] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1726.607983] [0: kworker/u16:1: 4185] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1726.608001] [0: kworker/u16:1: 4185] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1726.608019] [0: kworker/u16:1: 4185] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1726.608038] [0: kworker/u16:1: 4185] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1726.608057] [0: kworker/u16:1: 4185] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1726.608073] [0: kworker/u16:1: 4185] ---[ end trace 6caf259234bb42c1 ]---<4>[ 1726.608094] [0: kworker/u16:1: 4185] ------------[ cut here ]------------<4>[ 1726.608113] [0: kworker/u16:1: 4185] WARNING: at drivers/mmc/core/host.c:327 mmc_retune_release+0x2c/0x34()<4>[ 1726.608129] [0: kworker/u16:1: 4185] Modules linked in:<4>[ 1726.608146] [0: kworker/u16:1: 4185] CPU: 0 PID: 4185 Comm: kworker/u16:1 Tainted: G W 3.10.0 #2<4>[ 1726.608164] [0: kworker/u16:1: 4185] Workqueue: kmmcd mmc_rescan<0>[ 1726.608177] [0: kworker/u16:1: 4185] Call trace:<4>[ 1726.608196] [0: kworker/u16:1: 4185] [<ffffffc000087dc0>] dump_backtrace+0x0/0x10c<4>[ 1726.608215] [0: kworker/u16:1: 4185] [<ffffffc000087edc>] show_stack+0x10/0x1c<4>[ 1726.608234] [0: kworker/u16:1: 4185] [<ffffffc0008da218>] dump_stack+0x1c/0x28<4>[ 1726.608254] [0: kworker/u16:1: 4185] [<ffffffc0000a2240>] warn_slowpath_common+0x74/0x9c<4>[ 1726.608273] [0: kworker/u16:1: 4185] [<ffffffc0000a232c>] warn_slowpath_null+0x14/0x20<4>[ 1726.608292] [0: kworker/u16:1: 4185] [<ffffffc0006645b8>] mmc_retune_release+0x28/0x34<4>[ 1726.608310] [0: kworker/u16:1: 4185] [<ffffffc0006616d4>] mmc_wait_for_req+0x1a0/0x1bc<4>[ 1726.608328] [0: kworker/u16:1: 4185] [<ffffffc000661754>] mmc_wait_for_cmd+0x64/0x78<4>[ 1726.608347] [0: kworker/u16:1: 4185] [<ffffffc000666e24>] mmc_send_status+0xa4/0xc4<4>[ 1726.608366] [0: kworker/u16:1: 4185] [<ffffffc000667d20>] mmc_sd_detect+0x78/0x104<4>[ 1726.608384] [0: kworker/u16:1: 4185] [<ffffffc0006631ac>] mmc_rescan+0x84/0x304<4>[ 1726.608403] [0: kworker/u16:1: 4185] [<ffffffc0000ba168>] process_one_work+0x204/0x320<4>[ 1726.608421] [0: kworker/u16:1: 4185] [<ffffffc0000bb208>] worker_thread+0x204/0x328<4>[ 1726.608440] [0: kworker/u16:1: 4185] [<ffffffc0000c053c>] kthread+0xac/0xb8<4>[ 1726.608456] [0: kworker/u16:1: 4185] ---[ end trace 6caf259234bb42c2 ]---<3>[ 1726.608479] [0: kworker/u16:1: 4185] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 1726.608535] [0: kworker/u16:1: 4185] mmc1: card 1234 removed<4>[ 1726.613732] [0: kworker/u16:1: 4185] 1358..dw_mci_set_ios: no card. [mmc1]<11>[ 1727.593983] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 1727.756072] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 1727.756072] [0: kworker/0:0: 6949] <6>[ 1727.964678] [0: kworker/u16:4: 5076] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 1727.964732] [0: kworker/u16:4: 5076] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 1728.062292] [0: kworker/u16:4: 5076] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 1728.062355] [0: kworker/u16:4: 5076] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 1728.062502] [0: kworker/u16:4: 5076] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 1728.062548] [0: kworker/u16:4: 5076] mmc1: new high speed SDHC card at address 1234<6>[ 1728.064126] [0: kworker/u16:4: 5076] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 1728.066566] [0: kworker/u16:4: 5076] mmcblk1: p1<3>[ 1728.067749] [0: kworker/u16:4: 5076] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 1728.067815] [0: kworker/u16:4: 5076] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 1728.866763] [0: vold: 238] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<11>[ 1729.272272] [0: init: 1] init: no such service 'fuse_external_sd'<6>[ 1990.559769] [0:ConnectivitySer: 744] binder: 492:744 transaction failed 29189, size 324-0<6>[ 1990.797642] [0:ConnectivitySer: 744] binder: 492:744 transaction failed 29189, size 324-0<4>[ 2402.027396] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 2402.027396] [0: kworker/0:0: 6949] <3>[ 2402.221082] [0: kworker/u16:0: 6] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 2402.221171] [0: kworker/u16:0: 6] mmc1: card 1234 removed<4>[ 2402.246436] [0: kworker/u16:0: 6] 1358..dw_mci_set_ios: no card. [mmc1]<11>[ 2403.222891] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 2466.422372] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 2466.422372] [0: kworker/0:0: 6949] <6>[ 2466.633717] [0: kworker/u16:3: 8312] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 2466.633768] [0: kworker/u16:3: 8312] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 2466.800052] [0: kworker/u16:3: 8312] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 2466.800113] [0: kworker/u16:3: 8312] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 2466.800262] [0: kworker/u16:3: 8312] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 2466.800315] [0: kworker/u16:3: 8312] mmc1: new high speed SDHC card at address 1234<6>[ 2466.801774] [0: kworker/u16:3: 8312] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 2466.803908] [0: kworker/u16:3: 8312] mmcblk1: p1<3>[ 2466.809763] [0: kworker/u16:0: 6] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2466.809841] [0: kworker/u16:0: 6] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 2467.023976] [0: vold: 238] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<11>[ 2467.373476] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 2489.678922] [4: ChromiumNet: 9507] Error getting the SSID<4>[ 2489.678964] [4: ChromiumNet: 9507] Error getting the SSID<11>[ 2518.783395] [0: init: 1] init: untracked pid 9601 exited with status 0<11>[ 2520.767919] [0: init: 1] init: untracked pid 9669 exited with status 180<11>[ 2520.974860] [0: init: 1] init: untracked pid 9671 exited with status 0<4>[ 2564.438129] [0: kworker/0:0: 6949] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 2564.438129] [0: kworker/0:0: 6949] <3>[ 2564.630198] [0: kworker/u16:0: 6] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 2564.630294] [0: kworker/u16:0: 6] mmc1: card 1234 removed<4>[ 2564.684786] [4: kworker/u16:0: 6] 1358..dw_mci_set_ios: no card. [mmc1]<3>[ 2564.690257] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8192) failed<3>[ 2564.690294] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8193) failed<3>[ 2564.690323] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8194) failed<3>[ 2564.690353] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8195) failed<3>[ 2564.690381] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8196) failed<3>[ 2564.690410] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8197) failed<3>[ 2564.690439] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8198) failed<3>[ 2564.690468] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8199) failed<3>[ 2564.690497] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8200) failed<3>[ 2564.690526] [5: Thread-616: 9810] FAT-fs (mmcblk1p1): Directory bread(block 8201) failed<11>[ 2565.667457] [0: init: 1] init: no such service 'fuse_external_sd'<11>[ 2568.528951] [0: init: 1] init: untracked pid 8609 killed by signal 9<11>[ 2568.627543] [0: init: 1] init: untracked pid 9593 killed by signal 9<4>[ 2830.693091] [0: kworker/0:2: 9847] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 2830.693091] [0: kworker/0:2: 9847] <6>[ 2830.910481] [0: kworker/u16:1: 4185] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 2830.910534] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 2831.077068] [0: kworker/u16:1: 4185] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 2831.077130] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 2831.077275] [0: kworker/u16:1: 4185] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 2831.077326] [0: kworker/u16:1: 4185] mmc1: new high speed SDHC card at address 1234<6>[ 2831.080968] [1: kworker/u16:1: 4185] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 2831.082589] [0: kworker/u16:1: 4185] mmcblk1: p1<3>[ 2831.098879] [0: kworker/u16:3: 8312] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 2831.098950] [0: kworker/u16:3: 8312] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 2831.295343] [0: vold: 238] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<11>[ 2831.637327] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 3471.238772] [0: kworker/0:2: 9847] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 3471.238772] [0: kworker/0:2: 9847] <3>[ 3471.435400] [0: kworker/u16:3: 8312] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 3471.435497] [0: kworker/u16:3: 8312] mmc1: card 1234 removed<4>[ 3471.461934] [1: kworker/u16:3: 8312] 1358..dw_mci_set_ios: no card. [mmc1]<3>[ 3471.467512] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8192) failed<3>[ 3471.467546] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8193) failed<3>[ 3471.467571] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8194) failed<3>[ 3471.467595] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8195) failed<3>[ 3471.467620] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8196) failed<3>[ 3471.467645] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8197) failed<3>[ 3471.467670] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8198) failed<3>[ 3471.467695] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8199) failed<3>[ 3471.467720] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8200) failed<3>[ 3471.467744] [5: Thread-665:11116] FAT-fs (mmcblk1p1): Directory bread(block 8201) failed<11>[ 3472.441107] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 3784.455146] [0: kworker/0:0:11227] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 3784.455146] [0: kworker/0:0:11227] <6>[ 3784.662210] [0: kworker/u16:3: 8312] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 3784.662260] [0: kworker/u16:3: 8312] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 3784.848411] [0: kworker/u16:3: 8312] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 3784.848472] [0: kworker/u16:3: 8312] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 3784.848617] [0: kworker/u16:3: 8312] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 3784.848663] [0: kworker/u16:3: 8312] mmc1: new high speed SDHC card at address 1234<6>[ 3784.850093] [0: kworker/u16:3: 8312] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 3784.852190] [0: kworker/u16:3: 8312] mmcblk1: p1<3>[ 3784.853297] [0: kworker/u16:3: 8312] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 3784.853360] [0: kworker/u16:3: 8312] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 3785.085710] [0: vold: 238] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<11>[ 3785.259747] [0: init: 1] init: no such service 'fuse_external_sd'<3>[ 3788.170662] [0: system_server: 492] binder: 5371: binder_alloc_buf, no vma<6>[ 3788.170704] [0: system_server: 492] binder: 492:492 transaction failed 29201, size 112-0<11>[ 3826.389606] [0: init: 1] init: untracked pid 11578 exited with status 50<11>[ 3826.595850] [0: init: 1] init: untracked pid 11580 exited with status 0<6>[ 3827.039489] [5: libestool2.so:11600] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3827.049287] [7: mount:11602] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3827.055825] [7: libestool2.so:11603] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3827.070480] [6: mount:11604] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3874.701063] [5: libestool2.so:11677] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3874.714936] [6: mount:11679] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3876.755121] [0: libestool2.so:11687] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3876.772453] [6: mount:11690] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3891.810067] [5: libestool2.so:11710] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3891.825720] [5: mount:11712] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3891.845389] [5: libestool2.so:11713] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3891.865889] [6: mount:11714] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3920.474237] [7: libestool2.so:11733] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3920.489316] [5: mount:11736] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3920.501657] [6: libestool2.so:11737] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3920.512924] [5: mount:11738] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3945.444457] [0: libestool2.so:11762] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3945.459300] [6: mount:11764] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 3945.471803] [6: libestool2.so:11765] EXT4-fs (mmcblk0p11): re-mounted. Opts: <6>[ 3945.485586] [6: mount:11766] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)<6>[ 4519.273606] [7: system_server: 492] binder: 492:492 transaction failed 29189, size 100-0<6>[ 4823.886344] [7: Binder_1:13285] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 4840.228527] [0: kworker/0:0:12082] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 4840.228616] [0: kworker/0:0:12082] vcodec_service: done<4>[ 5176.582502] [0: kworker/0:0:12082] rk_sdmmc: BOOT The card is removed.. ===!!!!!!==[mmc1]<4>[ 5176.582502] [0: kworker/0:0:12082] <3>[ 5176.776732] [0: kworker/u16:2:12067] mmc_sd_detect(mmc1): Unable to re-detect card (-123)<6>[ 5176.776833] [0: kworker/u16:2:12067] mmc1: card 1234 removed<4>[ 5176.857682] [6: kworker/u16:2:12067] 1358..dw_mci_set_ios: no card. [mmc1]<3>[ 5176.864927] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8192) failed<3>[ 5176.864965] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8193) failed<3>[ 5176.864988] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8194) failed<3>[ 5176.865020] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8195) failed<3>[ 5176.865046] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8196) failed<3>[ 5176.865071] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8197) failed<3>[ 5176.865096] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8198) failed<3>[ 5176.865124] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8199) failed<3>[ 5176.865153] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8200) failed<3>[ 5176.865181] [4: Thread-861:14228] FAT-fs (mmcblk1p1): Directory bread(block 8201) failed<11>[ 5177.842110] [0: init: 1] init: no such service 'fuse_external_sd'<4>[ 5218.903372] [0: kworker/0:0:12082] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]<4>[ 5218.903372] [0: kworker/0:0:12082] <6>[ 5219.117783] [0: kworker/u16:6:12130] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)<4>[ 5219.117835] [0: kworker/u16:6:12130] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]<6>[ 5219.306610] [0: kworker/u16:6:12130] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)<4>[ 5219.306672] [0: kworker/u16:6:12130] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]<4>[ 5219.306815] [0: kworker/u16:6:12130] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]<6>[ 5219.306860] [0: kworker/u16:6:12130] mmc1: new high speed SDHC card at address 1234<6>[ 5219.308276] [0: kworker/u16:6:12130] mmcblk1: mmc1:1234 SA08G 7.21 GiB <6>[ 5219.312991] [0: kworker/u16:6:12130] mmcblk1: p1<3>[ 5219.314109] [0: kworker/u16:6:12130] rockchip-iodomain io-domains.32: rockchip iodomain parse grf supply failed<6>[ 5219.314171] [0: kworker/u16:6:12130] platform io-domains.32: Driver rockchip-iodomain requests probe deferral<4>[ 5219.541452] [0: vold: 238] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.<11>[ 5219.735558] [0: init: 1] init: no such service 'fuse_external_sd'<11>[ 5421.043770] [0: init: 1] init: untracked pid 14774 exited with status 1<11>[ 5421.073764] [0: init: 1] init: untracked pid 14781 exited with status 255<11>[ 5421.105636] [0: init: 1] init: untracked pid 14788 exited with status 0<11>[ 5421.136731] [0: init: 1] init: untracked pid 14795 exited with status 255<11>[ 5421.169969] [0: init: 1] init: untracked pid 14802 exited with status 0<11>[ 5421.200147] [0: init: 1] init: untracked pid 14809 exited with status 0<11>[ 5421.232263] [0: init: 1] init: untracked pid 14816 exited with status 0<11>[ 5421.413799] [0: init: 1] init: untracked pid 14823 exited with status 0<11>[ 5421.676417] [0: init: 1] init: untracked pid 14904 exited with status 1<11>[ 5421.737787] [1: init: 1] init: untracked pid 14922 exited with status 255<11>[ 5421.814607] [0: init: 1] init: untracked pid 14950 exited with status 0<11>[ 5421.898518] [0: init: 1] init: untracked pid 14977 exited with status 255<11>[ 5422.003946] [0: init: 1] init: untracked pid 14989 exited with status 0<11>[ 5422.037678] [0: init: 1] init: untracked pid 14784 exited with status 0<11>[ 5422.037791] [0: init: 1] init: untracked pid 14819 exited with status 0<11>[ 5422.039718] [0: init: 1] init: untracked pid 14791 exited with status 0<11>[ 5422.043104] [0: init: 1] init: untracked pid 14805 exited with status 0<11>[ 5422.043627] [0: init: 1] init: untracked pid 14777 exited with status 0<11>[ 5422.048861] [0: init: 1] init: untracked pid 14798 exited with status 0<11>[ 5422.089276] [0: init: 1] init: untracked pid 14997 exited with status 0<11>[ 5422.129337] [0: init: 1] init: untracked pid 14812 exited with status 0<11>[ 5422.160203] [0: init: 1] init: untracked pid 14826 exited with status 0<11>[ 5422.178465] [0: init: 1] init: untracked pid 15032 exited with status 0<11>[ 5422.268641] [0: init: 1] init: untracked pid 15053 exited with status 0<11>[ 5422.348518] [0: init: 1] init: untracked pid 15080 exited with status 0<11>[ 5422.464293] [1: init: 1] init: untracked pid 14932 exited with status 0<11>[ 5422.498756] [0: init: 1] init: untracked pid 14917 exited with status 0<11>[ 5422.592679] [0: init: 1] init: untracked pid 14962 exited with status 0<11>[ 5422.643279] [0: init: 1] init: untracked pid 14980 exited with status 0<11>[ 5422.674749] [1: init: 1] init: untracked pid 14992 exited with status 0<11>[ 5422.774072] [0: init: 1] init: untracked pid 15104 exited with status 0<11>[ 5422.874279] [0: init: 1] init: untracked pid 15000 exited with status 0<11>[ 5422.925740] [0: init: 1] init: untracked pid 15035 exited with status 0<11>[ 5422.956585] [0: init: 1] init: untracked pid 15059 exited with status 0<11>[ 5423.011133] [0: init: 1] init: untracked pid 15091 exited with status 0<11>[ 5423.051277] [1: init: 1] init: untracked pid 15107 exited with status 0<6>[ 5425.850086] [0:pool-4-thread-1:15193] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 5429.792128] [0: kworker/0:0:12082] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5429.792224] [0: kworker/0:0:12082] vcodec_service: done<6>[ 5446.864862] [0: kworker/u16:2:12067] stmmc_pltfr_fix_mac_speed: fix speed to 1000<6>[ 5446.864906] [0: kworker/u16:2:12067] stmmc_pltfr_fix_mac_speed: fix speed for RGMII<6>[ 5446.864942] [0: kworker/u16:2:12067] libphy: stmmac-0:01 - Link is Up - 1000/Full<11>[ 5448.900083] [0: init: 1] init: untracked pid 15274 exited with status 0<11>[ 5450.183608] [0: init: 1] init: untracked pid 15277 exited with status 0<6>[ 5455.902070] [6:pool-4-thread-3:15372] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 5471.643860] [0: kworker/0:0:12082] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5471.643960] [0: kworker/0:0:12082] vcodec_service: done<6>[ 5478.372535] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5478.376928] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5478.377536] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5478.377581] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5478.387068] [0: kworker/0:0:12082] cfg80211: Calling CRDA to update world regulatory domain<4>[ 5499.589191] [1: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5499.589191] [1: wpa_supplicant: 3320] <4>[ 5499.955326] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5499.957196] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5499.992216] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5500.034288] [1:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5500.136794] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5500.153484] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5500.153531] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5500.158410] [1: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5500.158464] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5500.370004] [6: dhcpcd:15400] Error getting the SSID<6>[ 5501.035629] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5501.037325] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5501.037476] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5501.037501] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5501.042631] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<4>[ 5532.081094] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5532.081094] [0: wpa_supplicant: 3320] <4>[ 5532.452968] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5532.453169] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5532.485111] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5532.494480] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5532.669525] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5532.679915] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5532.679960] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5532.682093] [1: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5532.682146] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5532.891977] [5: dhcpcd:15451] Error getting the SSID<6>[ 5533.543839] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5533.545665] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5533.545712] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5533.545741] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5533.552226] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<4>[ 5564.565035] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5564.565035] [0: wpa_supplicant: 3320] <4>[ 5564.936707] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5564.938279] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5564.975351] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5565.030029] [2:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5565.132219] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5565.141466] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5565.141507] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5565.143422] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5565.143462] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5565.352185] [5: dhcpcd:15519] Error getting the SSID<6>[ 5566.005125] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5566.010850] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5566.011108] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5566.011150] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5566.015554] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<11>[ 5569.595519] [0: init: 1] init: untracked pid 14827 exited with status 0<11>[ 5569.596323] [0: init: 1] init: untracked pid 15558 exited with status 0<11>[ 5569.632498] [0: init: 1] init: untracked pid 15565 exited with status 255<11>[ 5569.667842] [1: init: 1] init: untracked pid 15573 exited with status 0<11>[ 5569.698869] [0: init: 1] init: untracked pid 15580 exited with status 255<11>[ 5569.787392] [0: init: 1] init: untracked pid 15587 exited with status 0<11>[ 5569.848840] [0: init: 1] init: untracked pid 15594 exited with status 255<11>[ 5569.936819] [0: init: 1] init: untracked pid 15601 exited with status 0<11>[ 5570.218686] [2: init: 1] init: untracked pid 15631 exited with status 0<11>[ 5570.277349] [1: init: 1] init: untracked pid 15568 exited with status 0<11>[ 5570.362220] [0: init: 1] init: untracked pid 15561 exited with status 0<11>[ 5570.406575] [0: init: 1] init: untracked pid 15576 exited with status 0<11>[ 5570.454544] [0: init: 1] init: untracked pid 15743 exited with status 1<11>[ 5570.490131] [0: init: 1] init: untracked pid 15752 exited with status 255<11>[ 5570.525272] [0: init: 1] init: untracked pid 15597 exited with status 0<11>[ 5570.537429] [0: init: 1] init: untracked pid 15583 exited with status 0<11>[ 5570.537643] [0: init: 1] init: untracked pid 15590 exited with status 0<11>[ 5570.552384] [0: init: 1] init: untracked pid 15759 exited with status 0<11>[ 5570.601364] [0: init: 1] init: untracked pid 15611 exited with status 0<11>[ 5570.621999] [0: init: 1] init: untracked pid 15766 exited with status 255<11>[ 5570.670988] [0: init: 1] init: untracked pid 15639 exited with status 0<11>[ 5570.724779] [0: init: 1] init: untracked pid 15773 exited with status 0<11>[ 5570.792254] [1: init: 1] init: untracked pid 15780 exited with status 255<11>[ 5570.901939] [0: init: 1] init: untracked pid 15796 exited with status 0<11>[ 5571.010361] [0: init: 1] init: untracked pid 15822 exited with status 0<11>[ 5571.083843] [0: init: 1] init: untracked pid 15847 exited with status 0<11>[ 5571.231593] [0: init: 1] init: untracked pid 15868 exited with status 0<11>[ 5571.278301] [3: init: 1] init: untracked pid 15746 exited with status 0<11>[ 5571.295008] [0: init: 1] init: untracked pid 15755 exited with status 0<11>[ 5571.415003] [0: init: 1] init: untracked pid 15762 exited with status 0<11>[ 5571.505152] [0: init: 1] init: untracked pid 15769 exited with status 0<11>[ 5571.510716] [0: init: 1] init: untracked pid 15783 exited with status 0<11>[ 5571.548644] [0: init: 1] init: untracked pid 15776 exited with status 0<11>[ 5571.683022] [0: init: 1] init: untracked pid 15813 exited with status 0<11>[ 5571.766845] [0: init: 1] init: untracked pid 15825 exited with status 0<11>[ 5571.822559] [0: init: 1] init: untracked pid 15878 exited with status 0<11>[ 5571.833495] [0: init: 1] init: untracked pid 15857 exited with status 0<6>[ 5572.941191] [0:pool-5-thread-1:15974] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 5581.800420] [0: kworker/0:2:15396] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5581.800514] [0: kworker/0:2:15396] vcodec_service: done<6>[ 5588.857754] [6: Binder_3:16004] vcodec_service: ff9a0000.vpu_combo: power on<4>[ 5597.054500] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5597.054500] [0: wpa_supplicant: 3320] <4>[ 5597.427439] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5597.430333] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5597.471436] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5597.476970] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5597.618706] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5597.635694] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5597.635739] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5597.638286] [1: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5597.638351] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5597.847509] [7: dhcpcd:16017] Error getting the SSID<6>[ 5598.224746] [0: kworker/0:2:15396] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5598.224834] [0: kworker/0:2:15396] vcodec_service: done<6>[ 5598.346256] [2: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5598.353674] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5598.353754] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5598.353778] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5598.357854] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<6>[ 5598.406521] [1: Binder_3:16004] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 5602.346374] [1: kworker/1:1: 53] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5602.346473] [1: kworker/1:1: 53] vcodec_service: done<6>[ 5604.893451] [1: Binder_4:16077] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 5621.386921] [0: kworker/0:2:15396] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5621.387088] [0: kworker/0:2:15396] vcodec_service: done<4>[ 5629.378900] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5629.378900] [0: wpa_supplicant: 3320] <4>[ 5629.750417] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5629.751840] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5629.825721] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5629.842239] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5630.005836] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5630.013509] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5630.013553] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5630.013976] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5630.014003] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5630.222278] [6: dhcpcd:16117] Error getting the SSID<6>[ 5630.915042] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5630.916727] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5630.916791] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5630.916821] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5630.919906] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<4>[ 5661.949293] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5661.949293] [0: wpa_supplicant: 3320] <4>[ 5662.320841] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5662.322456] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5662.359770] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5662.372363] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5662.507668] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5662.518560] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5662.518596] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5662.518906] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5662.518933] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5662.724187] [4: dhcpcd:16419] Error getting the SSID<6>[ 5663.218465] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5663.228732] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5663.228829] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5663.228858] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5663.231878] [0: kworker/0:1: 50] cfg80211: Calling CRDA to update world regulatory domain<4>[ 5694.294913] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5694.294913] [0: wpa_supplicant: 3320] <4>[ 5694.666445] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5694.666579] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5694.719205] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5694.772075] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5694.941014] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5694.948184] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5694.948223] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5694.948617] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5694.948651] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5695.168921] [0: dhcpcd:16546] Error getting the SSID<6>[ 5695.865576] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5695.867248] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5695.867303] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5695.867333] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5695.870247] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<4>[ 5726.893506] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5726.893506] [0: wpa_supplicant: 3320] <4>[ 5727.265842] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5727.271429] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5727.309561] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5727.368350] [1:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5727.449895] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5727.467941] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5727.467988] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5727.469285] [1: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5727.469330] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5727.677539] [5: dhcpcd:16686] Error getting the SSID<6>[ 5728.366790] [2: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5728.368681] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5728.368812] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5728.368843] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5728.373867] [0: kworker/0:1: 50] cfg80211: Calling CRDA to update world regulatory domain<6>[ 5759.167700] [1: Binder_1:16826] vcodec_service: ff9a0000.vpu_combo: power on<4>[ 5759.398678] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5759.398678] [0: wpa_supplicant: 3320] <4>[ 5759.762310] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5759.763893] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5759.795714] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5759.816252] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5759.941460] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5759.950441] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5759.950520] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5759.951163] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5759.951237] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5760.161830] [7: dhcpcd:16830] Error getting the SSID<6>[ 5760.850841] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5760.852588] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5760.852759] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5760.852786] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5760.859211] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<6>[ 5767.097743] [0: kworker/0:2:15396] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5767.097841] [0: kworker/0:2:15396] vcodec_service: done<6>[ 5769.798864] [0: Binder_1:16826] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 5773.739484] [0: kworker/0:2:15396] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5773.739579] [0: kworker/0:2:15396] vcodec_service: done<6>[ 5776.009376] [0: Binder_1:16826] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 5779.948554] [0: kworker/0:2:15396] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 5779.948645] [0: kworker/0:2:15396] vcodec_service: done<4>[ 5791.877202] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5791.877202] [0: wpa_supplicant: 3320] <4>[ 5792.248742] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5792.249170] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5792.264646] [2:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5792.298039] [1: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5792.451984] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5792.467132] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5792.467202] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5792.467989] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5792.468041] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5792.673693] [6: dhcpcd:16890] Error getting the SSID<6>[ 5793.165413] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5793.167886] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5793.167935] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5793.167964] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5793.170433] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<6>[ 5812.912883] [0: kworker/u16:0:10929] libphy: stmmac-0:01 - Link is Down<6>[ 5816.848857] [0: kworker/u16:5:11796] stmmc_pltfr_fix_mac_speed: fix speed to 1000<6>[ 5816.848902] [0: kworker/u16:5:11796] stmmc_pltfr_fix_mac_speed: fix speed for RGMII<6>[ 5816.848937] [0: kworker/u16:5:11796] libphy: stmmac-0:01 - Link is Up - 1000/Full<4>[ 5824.171753] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5824.171753] [0: wpa_supplicant: 3320] <4>[ 5824.543511] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5824.544633] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5824.579935] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5824.610503] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5824.736493] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5824.748057] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5824.748099] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5824.749851] [1: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5824.749893] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5824.956223] [5: dhcpcd:17031] Error getting the SSID<6>[ 5825.615746] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5825.617870] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5825.618283] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5825.618317] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5825.622546] [0: kworker/0:2:15396] cfg80211: Calling CRDA to update world regulatory domain<4>[ 5856.675083] [1: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5856.675083] [1: wpa_supplicant: 3320] <4>[ 5857.044696] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5857.047264] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5857.061664] [1:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5866.907477] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5866.909383] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5866.909504] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5866.909541] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5866.915631] [0: kworker/0:2:15396] cfg80211: Calling CRDA for country: GB<4>[ 5868.353174] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5868.353174] [0: wpa_supplicant: 3320] <4>[ 5869.039150] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5869.039307] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5869.152378] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5878.885795] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5878.887856] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5878.888072] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5878.888116] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5878.892878] [0: kworker/0:2:15396] cfg80211: Calling CRDA to update world regulatory domain<4>[ 5881.543693] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5881.543693] [0: wpa_supplicant: 3320] <4>[ 5881.915121] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5881.916441] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5881.948156] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5883.140932] [1: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5883.312348] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5883.324948] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5883.324996] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5883.325659] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5883.325702] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5883.532650] [4: dhcpcd:17176] Error getting the SSID<6>[ 5884.196147] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5884.197963] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5884.198018] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5884.198049] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5884.204622] [0: kworker/0:2:15396] cfg80211: Calling CRDA to update world regulatory domain<11>[ 5884.734078] [0: init: 1] init: untracked pid 15902 exited with status 0<11>[ 5884.735271] [1: init: 1] init: untracked pid 17212 exited with status 0<11>[ 5884.767248] [0: init: 1] init: untracked pid 17219 exited with status 1<11>[ 5885.288860] [0: init: 1] init: untracked pid 17222 exited with status 0<11>[ 5885.294084] [0: init: 1] init: untracked pid 17215 exited with status 0<6>[ 5905.418715] [0: kworker/u16:0:10929] libphy: stmmac-0:01 - Link is Down<6>[ 5908.370773] [1: kworker/u16:6:12130] stmmc_pltfr_fix_mac_speed: fix speed to 1000<6>[ 5908.370815] [1: kworker/u16:6:12130] stmmc_pltfr_fix_mac_speed: fix speed for RGMII<6>[ 5908.370847] [1: kworker/u16:6:12130] libphy: stmmac-0:01 - Link is Up - 1000/Full<4>[ 5910.429208] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5910.429208] [0: wpa_supplicant: 3320] <4>[ 5910.800908] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5910.801164] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5910.846652] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5910.869429] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5911.002380] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5911.013210] [2: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5911.013256] [2: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5911.014441] [2: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5911.014487] [2: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5911.228235] [4: dhcpcd:17487] Error getting the SSID<6>[ 5911.895294] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5911.896988] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5911.897140] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5911.897164] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5911.904326] [0: kworker/0:2:15396] cfg80211: Calling CRDA for country: GB<4>[ 5942.960282] [7: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5942.960282] [7: wpa_supplicant: 3320] <4>[ 5943.336825] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5943.338559] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5943.388272] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5943.417558] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5943.526255] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5943.533899] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5943.533945] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5943.534371] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5943.534415] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5943.740872] [7: dhcpcd:17764] Error getting the SSID<6>[ 5944.397393] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5944.407937] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5944.407992] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5944.408022] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5944.410394] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<4>[ 5975.482183] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 5975.482183] [0: wpa_supplicant: 3320] <4>[ 5975.857307] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 5975.860665] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 5975.869547] [1:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 5976.879868] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 5977.033205] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 5977.045445] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 5977.045494] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 5977.045891] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 5977.045929] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 5977.252067] [5: dhcpcd:17902] Error getting the SSID<6>[ 5977.896860] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 5977.898613] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 5977.898767] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 5977.898792] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 5977.907880] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<4>[ 6008.927441] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6008.927441] [0: wpa_supplicant: 3320] <4>[ 6009.303353] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6009.304476] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6009.321746] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6010.320975] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6010.486721] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6010.494514] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6010.494566] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6010.495072] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6010.495116] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6010.701441] [5: dhcpcd:18059] Error getting the SSID<6>[ 6011.396408] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6011.398170] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6011.398323] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6011.398346] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6011.401734] [0: kworker/0:2:15396] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6042.433118] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6042.433118] [0: wpa_supplicant: 3320] <4>[ 6042.804562] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6042.804734] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6042.860180] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6042.876376] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6043.018998] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6043.028499] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6043.028552] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6043.029032] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6043.029076] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6043.234204] [6: dhcpcd:18193] Error getting the SSID<6>[ 6043.697700] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6043.712824] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6043.712903] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6043.712929] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6043.717915] [0: kworker/0:2:15396] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6074.728662] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6074.728662] [0: wpa_supplicant: 3320] <4>[ 6075.093680] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6075.098880] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6075.122473] [1:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6075.132561] [1: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6075.282359] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6075.306034] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6075.306078] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6075.306482] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6075.306520] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6075.518997] [7: dhcpcd:18285] Error getting the SSID<6>[ 6076.180231] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6076.184528] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6076.184578] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6076.184607] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6076.187747] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<4>[ 6107.219295] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6107.219295] [0: wpa_supplicant: 3320] <4>[ 6107.590892] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6107.592351] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6107.626922] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6107.672025] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6107.788053] [2: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6107.801637] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6107.801690] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6107.802163] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6107.802208] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6108.009385] [5: dhcpcd:18353] Error getting the SSID<6>[ 6108.676841] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6108.678253] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6108.678508] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6108.678535] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6108.696230] [0: kworker/0:2:15396] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6139.710662] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6139.710662] [0: wpa_supplicant: 3320] <4>[ 6140.082097] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6140.083569] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6140.118103] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6140.118841] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6140.266540] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6140.276596] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6140.276652] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6140.277160] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6140.277209] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6140.483589] [6: dhcpcd:18447] Error getting the SSID<6>[ 6140.933621] [2: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6140.940497] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6140.944647] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6140.944702] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6140.952762] [0: kworker/0:1:18387] cfg80211: Calling CRDA to update world regulatory domain<6>[ 6143.747247] [5: Binder_3:18588] vcodec_service: ff9a0000.vpu_combo: power on<6>[ 6153.770117] [0: kworker/0:2:15396] vcodec_service: ff9a0000.vpu_combo: power off...<6>[ 6153.770215] [0: kworker/0:2:15396] vcodec_service: done<4>[ 6171.976038] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6171.976038] [0: wpa_supplicant: 3320] <4>[ 6172.347487] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6172.349097] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6172.365010] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6172.395221] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6172.543946] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6172.552202] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6172.552254] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6172.552744] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6172.552789] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6172.757953] [6: dhcpcd:18686] Error getting the SSID<6>[ 6173.451026] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6173.452948] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6173.453041] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6173.453068] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6173.456485] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<4>[ 6204.467726] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6204.467726] [0: wpa_supplicant: 3320] <4>[ 6204.839120] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6204.840599] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6204.887176] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6204.913085] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6205.048394] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6205.061805] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6205.061856] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6205.062324] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6205.062367] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6205.275277] [6: dhcpcd:18761] Error getting the SSID<6>[ 6205.729081] [2: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6205.731304] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6205.731353] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6205.731382] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6205.734122] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6236.743116] [7: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6236.743116] [7: wpa_supplicant: 3320] <4>[ 6237.114745] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6237.116058] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6237.161068] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6237.170969] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6237.317532] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6237.326365] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6237.326415] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6237.326884] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6237.326928] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6237.532133] [5: dhcpcd:18833] Error getting the SSID<6>[ 6238.191762] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6238.200594] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6238.200643] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6238.200672] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6238.205179] [0: kworker/0:1:18387] cfg80211: Calling CRDA for country: GB<4>[ 6269.236949] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6269.236949] [0: wpa_supplicant: 3320] <4>[ 6269.612092] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6269.613446] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6269.670262] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6269.708119] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6269.805749] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6269.812490] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6269.812523] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6269.812850] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6269.812879] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6270.019559] [6: dhcpcd:18907] Error getting the SSID<6>[ 6270.477870] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6270.484644] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6270.484896] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6270.484928] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6270.488247] [0: kworker/0:1:18387] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6301.481057] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6301.481057] [0: wpa_supplicant: 3320] <4>[ 6301.856756] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6301.861235] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6301.953816] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6301.967877] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6302.114187] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6302.125190] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6302.125247] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6302.125830] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6302.125880] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6302.332632] [7: dhcpcd:18979] Error getting the SSID<6>[ 6302.997168] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6302.998995] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6302.999041] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6302.999071] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6303.001551] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6334.030957] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6334.030957] [0: wpa_supplicant: 3320] <4>[ 6334.405609] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6334.407025] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6334.450548] [1: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6334.502575] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6334.592302] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6334.600243] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6334.600287] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6334.600734] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6334.600774] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6334.808818] [6: dhcpcd:19056] Error getting the SSID<6>[ 6335.461462] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6335.468007] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6335.468177] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6335.468207] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6335.472902] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<4>[ 6366.503904] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6366.503904] [0: wpa_supplicant: 3320] <4>[ 6366.874724] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6366.876435] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6366.950217] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6366.959345] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6367.121162] [2: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6367.127401] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6367.127432] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6367.127768] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6367.127796] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6367.334668] [7: dhcpcd:19128] Error getting the SSID<6>[ 6367.990256] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6367.999452] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6367.999557] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6367.999588] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6368.004123] [0: kworker/0:1:18387] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6399.024800] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6399.024800] [0: wpa_supplicant: 3320] <4>[ 6400.037270] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6400.038779] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6400.090216] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6400.102896] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6400.263053] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6400.283677] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6400.283723] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6400.285235] [2: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6400.285299] [2: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6400.503652] [7: dhcpcd:19203] Error getting the SSID<6>[ 6401.151064] [2: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6401.152276] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6401.152441] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6401.152466] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6401.159333] [0: kworker/0:2:15396] cfg80211: Calling CRDA for country: GB<11>[ 6409.495902] [0: init: 1] init: untracked pid 19250 exited with status 0<11>[ 6411.644238] [0: init: 1] init: untracked pid 19316 exited with status 164<11>[ 6411.854988] [0: init: 1] init: untracked pid 19318 exited with status 0<4>[ 6420.959858] [7: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6420.959985] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<11>[ 6421.247549] [1: init: 1] init: untracked pid 19352 exited with status 109<11>[ 6421.455145] [0: init: 1] init: untracked pid 19354 exited with status 0<4>[ 6422.028662] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6422.028899] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6423.101270] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6423.101502] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6424.173842] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6424.174085] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6425.246525] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6425.246689] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6426.320689] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6426.321201] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6427.398506] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6427.398657] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6428.463948] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6428.464180] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6429.536597] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6429.536829] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6430.609147] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6430.609342] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6431.681754] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6431.681984] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6432.225146] [2: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6432.225146] [2: wpa_supplicant: 3320] <4>[ 6432.596270] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6432.597806] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6432.640023] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6432.653438] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6432.754372] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6432.754595] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6432.803756] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6432.814227] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6432.814275] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6432.814881] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6432.814932] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6433.021626] [7: dhcpcd:19417] Error getting the SSID<4>[ 6433.826904] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6433.827100] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<6>[ 6433.878132] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6433.887836] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6433.887886] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6433.887915] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6433.890808] [0: kworker/0:2:15396] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6434.901694] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6434.901911] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6435.971952] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6435.972126] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6437.046290] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6437.046528] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6438.117174] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6438.117386] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6439.189666] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6439.189987] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6440.262336] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6440.262529] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6441.335776] [2: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6441.335999] [2: kworker/2:1: 52] ff580000.usb suspend, HPRT0:0x1000<4>[ 6442.408112] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6442.408500] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6443.479907] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6443.480149] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6444.552491] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6444.552731] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6445.625046] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6445.625263] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6446.697630] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6446.697849] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6447.770832] [1: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6447.771051] [1: kworker/1:1: 53] ff580000.usb suspend, HPRT0:0x1000<4>[ 6448.843083] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6448.843253] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6449.915983] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6449.916248] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6450.987993] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6450.988168] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6452.060401] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6452.060642] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6453.133092] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6453.133282] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6454.205614] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6454.205808] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6455.278001] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6455.278210] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6456.350658] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6456.350830] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6457.423196] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6457.423506] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6458.506993] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6458.507310] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6459.578911] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6459.579116] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6460.650711] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6460.650948] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6461.723258] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6461.723471] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6462.795926] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6462.796163] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6463.868505] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6463.868681] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6464.932654] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6464.932654] [0: wpa_supplicant: 3320] <4>[ 6464.941084] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6464.941301] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6465.308024] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6465.309297] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6465.367502] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6465.402787] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6465.528752] [1: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6465.564155] [7: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6465.564182] [7: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6465.565106] [7: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6465.565131] [7: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6465.775301] [6: dhcpcd:19514] Error getting the SSID<4>[ 6466.013570] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6466.013881] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<6>[ 6466.448158] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6466.450016] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6466.450153] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6466.450182] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6466.455284] [0: kworker/0:0:19448] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6467.086061] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6467.086300] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6468.158614] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6468.158776] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6469.232183] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6469.232388] [0: kworker/0:2:15396] ff580000.usb suspend, HPRT0:0x1000<4>[ 6470.305119] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6470.305286] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6471.376274] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6471.376444] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6472.449017] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6472.449233] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6473.522992] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6473.524165] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6474.593959] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6474.594171] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6475.666789] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6475.667024] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6476.739135] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6476.739371] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6477.811645] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6477.811829] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6478.886941] [1: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6478.887150] [1: kworker/1:1: 53] ff580000.usb suspend, HPRT0:0x1000<4>[ 6479.956832] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6479.957012] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6481.031899] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6481.032104] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6482.101873] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6482.102046] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6483.174966] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6483.175223] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6484.247838] [1: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6484.248002] [1: kworker/1:1: 53] ff580000.usb suspend, HPRT0:0x1000<4>[ 6485.319508] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6485.319687] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6486.393238] [1: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6486.393455] [1: kworker/1:1: 53] ff580000.usb suspend, HPRT0:0x1000<4>[ 6487.464764] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6487.464949] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6488.537382] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6488.537619] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6489.611670] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6489.611878] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6490.682846] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6490.683207] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6491.755678] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6491.756001] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6492.827516] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6492.827756] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6493.909501] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6493.909711] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6494.982428] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6494.982642] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<11>[ 6495.584910] [1: init: 1] init: untracked pid 19697 exited with status 36<11>[ 6495.805953] [0: init: 1] init: untracked pid 19699 exited with status 0<4>[ 6496.055063] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6496.055314] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6497.127635] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6497.127876] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6498.201654] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6498.202353] [2: kworker/2:1: 52] ff580000.usb suspend, HPRT0:0x1000<4>[ 6498.426850] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6498.426850] [0: wpa_supplicant: 3320] <4>[ 6498.807014] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6498.808933] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6498.846713] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6498.858561] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6498.999013] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6499.013308] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6499.013358] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6499.013889] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6499.013935] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6499.223656] [5: dhcpcd:19738] Error getting the SSID<4>[ 6499.272585] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6499.272748] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<6>[ 6499.738948] [1: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6499.746857] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6499.747704] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6499.747748] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6499.751018] [1: kworker/1:1: 53] cfg80211: Calling CRDA for country: GB<4>[ 6500.345224] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6500.345473] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6501.417981] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6501.418661] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6502.490379] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6502.490621] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6503.563762] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6503.563996] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6504.635492] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6504.635729] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6505.708090] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6505.708330] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6506.780666] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6506.780904] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6507.853357] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6507.853592] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6508.925760] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6508.925996] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6509.998313] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6509.998534] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6511.070854] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6511.071068] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6512.143456] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6512.143689] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6513.218914] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6513.219146] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6514.290207] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6514.290441] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6515.361176] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6515.361413] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6516.433701] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6516.433935] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6517.512386] [1: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6517.512606] [1: kworker/1:1: 53] ff580000.usb suspend, HPRT0:0x1000<4>[ 6518.578816] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6518.579034] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6519.651358] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6519.651596] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6520.723927] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6520.724168] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6521.796495] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6521.796732] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6522.869078] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6522.869317] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6523.951400] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6523.951653] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6525.024892] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6525.025125] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6526.098683] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6526.098918] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6527.169072] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6527.169284] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6528.241736] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6528.241969] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6529.314231] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6529.314449] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6530.386791] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6530.386964] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6530.781884] [1: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6530.781884] [1: wpa_supplicant: 3320] <4>[ 6531.153429] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6531.153985] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6531.188429] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6531.205648] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6531.357494] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6531.365700] [0: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6531.365733] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6531.369083] [1: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6531.369122] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6531.459278] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6531.459435] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6531.573915] [7: dhcpcd:19796] Error getting the SSID<6>[ 6532.256640] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6532.258619] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6532.258727] [0:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6532.258759] [0:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6532.268643] [0: kworker/0:0:19448] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6532.531841] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6532.532085] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6533.604738] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6533.604982] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6534.677233] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6534.677466] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6535.750439] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6535.750673] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6536.832615] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6536.832794] [0: adb:19357] ff580000.usb suspend, HPRT0:0x1000<4>[ 6537.904627] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6537.904853] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6538.977329] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6538.977520] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6540.049730] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6540.049967] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6541.122227] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6541.122462] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6542.194786] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6542.195020] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6543.268637] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6543.268867] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6544.339909] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6544.340139] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6545.412737] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6545.412973] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6546.485067] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6546.485305] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6547.559093] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6547.559291] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6548.630118] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6548.630312] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6549.702962] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6549.703170] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6550.775432] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6550.775651] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6551.848045] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6551.848305] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6552.921725] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6552.921932] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6553.993989] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6553.994169] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6555.065450] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6555.065652] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6556.138111] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6556.138377] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6557.211062] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6557.211293] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6558.284085] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6558.284319] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6559.357319] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6559.357545] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6560.428377] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6560.428592] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6561.500893] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6561.501128] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6562.573465] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6562.573630] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6563.324368] [0: wpa_supplicant: 3320] Connectting with 9c:d3:6d:2e:bb:38 channel (6) ssid "VM506806-2G", len (11)<4>[ 6563.324368] [0: wpa_supplicant: 3320] <4>[ 6563.645971] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6563.646219] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6563.696499] [0: dhd_dpc: 205] wl_iw_event: Link UP with BSSID=9C:D3:6D:2E:BB:38<4>[ 6563.697988] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<6>[ 6563.731949] [0: wpa_supplicant: 3320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready<4>[ 6563.753069] [0:wl_event_handle: 203] wl_bss_connect_done succeeded with 9c:d3:6d:2e:bb:38<4>[ 6563.919211] [0: wpa_supplicant: 3320] dhd_set_suspend: Remove extra suspend setting<4>[ 6563.932831] [1: wpa_supplicant: 3320] dhd_pno_get_for_batch : wifi location service is not supported<3>[ 6563.932879] [1: wpa_supplicant: 3320] ANDROID-ERROR) failed to getting batching results<4>[ 6563.936226] [0: wpa_supplicant: 3320] dhd_pno_stop_for_batch : wifi location service is not supported<3>[ 6563.936275] [0: wpa_supplicant: 3320] ANDROID-ERROR) failed to stop batching scan<4>[ 6564.143892] [6: dhcpcd:19977] Error getting the SSID<4>[ 6564.720798] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6564.721191] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<6>[ 6564.840715] [0: wpa_supplicant: 3320] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3<4>[ 6564.842533] [0: dhd_dpc: 205] wl_iw_event: Link Down with BSSID=9C:D3:6D:2E:BB:38<6>[ 6564.842585] [1:wl_event_handle: 203] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK<4>[ 6564.842615] [1:wl_event_handle: 203] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 9c:d3:6d:2e:bb:38<6>[ 6564.845420] [1: kworker/1:1: 53] cfg80211: Calling CRDA to update world regulatory domain<4>[ 6565.800969] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6565.801208] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6566.873522] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6566.873758] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6567.946072] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6567.946306] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6569.018867] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6569.019105] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6570.091977] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6570.092193] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6571.166630] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6571.168884] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000<4>[ 6572.239259] [0: adb:19357] ff580000.usb resume, HPRT0:0x1000<4>[ 6572.239501] [0: kworker/0:0:19448] ff580000.usb suspend, HPRT0:0x1000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
