API tools faq
paste
dtalley11

early dmesg

dtalley11
Apr 20th, 2013
97
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 39.80 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Initializing cgroup subsys cpu
  2.  
  3. <5>[ 0.000000] Linux version 2.6.35.7+ (qnhoang81@qnhoang81-laptop) (gcc version 4.4.3 (GCC) ) #2 PREEMPT Sat Mar 23 19:20:11 EDT 2013
  4.  
  5. <4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
  6.  
  7. <4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
  8.  
  9. <4>[ 0.000000] Machine: GELATO board
  10.  
  11. <6>[ 0.000000] Partition (from atag) boot -- Offset:144 Size:28
  12.  
  13. <6>[ 0.000000] Partition (from atag) cache -- Offset:16c Size:399
  14.  
  15. <6>[ 0.000000] Partition (from atag) recovery -- Offset:505 Size:38
  16.  
  17. <6>[ 0.000000] Partition (from atag) splash -- Offset:53d Size:a
  18.  
  19. <6>[ 0.000000] Partition (from atag) FOTA -- Offset:547 Size:8
  20.  
  21. <6>[ 0.000000] Partition (from atag) FOTA_STO -- Offset:54f Size:8
  22.  
  23. <6>[ 0.000000] Partition (from atag) system -- Offset:557 Size:4f0
  24.  
  25. <6>[ 0.000000] Partition (from atag) userdata -- Offset:a47 Size:5a8
  26.  
  27. <6>[ 0.000000] Partition (from atag) misc -- Offset:fef Size:4
  28.  
  29. <6>[ 0.000000] Partition (from atag) persist -- Offset:ff3 Size:c
  30.  
  31. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  32.  
  33. <7>[ 0.000000] On node 0 totalpages: 122112
  34.  
  35. <7>[ 0.000000] free_area_init_node: node 0, pgdat c0718700, node_mem_map c0972000
  36.  
  37. <7>[ 0.000000] Normal zone: 954 pages used for memmap
  38.  
  39. <7>[ 0.000000] Normal zone: 0 pages reserved
  40.  
  41. <7>[ 0.000000] Normal zone: 121158 pages, LIFO batch:31
  42.  
  43. <6>[ 0.000000] allocating 28794880 bytes at c1026000 (13226000 physical) for mdp pmem arena
  44.  
  45. <6>[ 0.000000] allocating 11997184 bytes at c2b9c000 (14d9c000 physical) for adsp pmem arena
  46.  
  47. <6>[ 0.000000] allocating 372736 bytes (at 1590d000 physical) for audio pmem arena
  48.  
  49. <6>[ 0.000000] allocating 1536000 bytes at c3768000 (15968000 physical) for fb
  50.  
  51. <6>[ 0.000000] allocating 114688 bytes at c3900000 (15b00000 physical) for kernel ebi1 pmem arena
  52.  
  53. <6>[ 0.000000] allocating 2097152 bytes (at 15b1c000 physical) for KGSL
  54.  
  55. <6>[ 0.000000] L210 cache controller enabled
  56.  
  57. <1>[ 0.000000] Initialized strongly ordered page successfully
  58.  
  59. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121158
  60.  
  61. <5>[ 0.000000] Kernel command line: mem=477M console=ttyMSM2,115200n8 androidboot.hardware=gelato androidboot.mode=normal androidboot.carrier=VirginMobile androidboot.bootloader=6170 uart_console=disable lge.rev=<null> recovery=off lge.reboot=reboot androidboot.baseband=msm
  62.  
  63. <6>[ 0.000000] UART CONSOLE : disable
  64.  
  65. <6>[ 0.000000] BOARD: H/W revision = Unknown
  66.  
  67. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  68.  
  69. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  70.  
  71. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  72.  
  73. <6>[ 0.000000] Memory: 477MB = 477MB total
  74.  
  75. <5>[ 0.000000] Memory: 430544k/430544k available, 57904k reserved, 0K highmem
  76.  
  77. <5>[ 0.000000] Virtual kernel memory layout:
  78.  
  79. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  80.  
  81. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  82.  
  83. <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  84.  
  85. <5>[ 0.000000] vmalloc : 0xde000000 - 0xfa000000 ( 448 MB)
  86.  
  87. <5>[ 0.000000] lowmem : 0xc0000000 - 0xddd00000 ( 477 MB)
  88.  
  89. <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  90.  
  91. <5>[ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
  92.  
  93. <5>[ 0.000000] .text : 0xc002f000 - 0xc06ae000 (6652 kB)
  94.  
  95. <5>[ 0.000000] .data : 0xc06d0000 - 0xc0724ae0 ( 339 kB)
  96.  
  97. <6>[ 0.000000] Hierarchical RCU implementation.
  98.  
  99. <6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
  100.  
  101. <6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
  102.  
  103. <6>[ 0.000000] NR_IRQS:261
  104.  
  105. <4>[ 0.000000] Console: colour dummy device 80x30
  106.  
  107. <6>[ 0.000238] Calibrating delay loop... 532.48 BogoMIPS (lpj=2662400)
  108.  
  109. <6>[ 0.250084] pid_max: default: 32768 minimum: 301
  110.  
  111. <4>[ 0.250299] Mount-cache hash table entries: 512
  112.  
  113. <6>[ 0.250693] Initializing cgroup subsys cpuacct
  114.  
  115. <6>[ 0.250709] Initializing cgroup subsys freezer
  116.  
  117. <6>[ 0.250736] CPU: Testing write buffer coherency: ok
  118.  
  119. <6>[ 0.252364] NET: Registered protocol family 16
  120.  
  121. <3>[ 0.253248] smem_find(137, 64): wrong size 56
  122.  
  123. <6>[ 0.253271] socinfo_init: v2, id=44, ver=3.0, raw_id=992, raw_ver=5
  124.  
  125. <6>[ 0.253341] acpu_clock_init()
  126.  
  127. <6>[ 0.253353] Shared PLL control available.
  128.  
  129. <6>[ 0.253516] L val: PLL0: 50, PLL1: 10, PLL2: 41
  130.  
  131. <6>[ 0.253643] ACPU running at 800000 KHz
  132.  
  133. <6>[ 0.253654] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
  134.  
  135. <6>[ 0.253678] 0 19200 -1 1 19200 1 24576 -1 -1 -1 5 3 6
  136.  
  137. <6>[ 0.253699] 1 98304 1 2 98304 1 49152 -1 -1 -1 7 3 6
  138.  
  139. <6>[ 0.253719] 2 120000 0 8 60000 2 49152 -1 1 -1 7 3 6
  140.  
  141. <6>[ 0.253741] 3 196608 1 1 65536 3 98304 2 1 -1 7 -1 6
  142.  
  143. <6>[ 0.253763] 4 200000 2 4 66667 3 98304 2 1 -1 7 -1 6
  144.  
  145. <6>[ 0.253784] 5 320000 0 3 160000 2 160000 2 1 4 7 -1 6
  146.  
  147. <6>[ 0.253804] 6 400000 2 2 133333 3 160000 2 1 4 7 -1 8
  148.  
  149. <6>[ 0.253826] 7 480000 0 2 160000 3 160000 2 1 4 -1 -1 8
  150.  
  151. <6>[ 0.253848] 8 800000 2 1 200000 4 200000 7 -1 6 -1 -1 -1
  152.  
  153. <6>[ 0.253861] 5 scaling frequencies supported.
  154.  
  155. <4>[ 0.255186] RAM CONSOLE START ADDR : 804257792
  156.  
  157. <4>[ 0.255198] RAM CONSOLE END ADDR : 804519935
  158.  
  159. <6>[ 0.255266] ram_console: got buffer at 2ff00000, size 40000
  160.  
  161. <6>[ 0.255313] ram_console: found existing buffer, size 173193, start 173193
  162.  
  163. <6>[ 0.261588] console [ram-1] enabled
  164.  
  165. <6>[ 0.263528] init i2c acceleration
  166.  
  167. <6>[ 0.263676] init i2c proximity
  168.  
  169. <6>[ 0.263834] init i2c ecom
  170.  
  171. <4>[ 0.271061] bio: create slab <bio-0> at 0
  172.  
  173. <5>[ 0.271873] SCSI subsystem initialized
  174.  
  175. <6>[ 0.272318] i2c-gpio i2c-gpio.2: using pins 89 (SDA) and 88 (SCL)
  176.  
  177. <6>[ 0.272474] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
  178.  
  179. <6>[ 0.272629] i2c-gpio i2c-gpio.4: using pins 76 (SDA) and 78 (SCL)
  180.  
  181. <6>[ 0.272794] i2c-gpio i2c-gpio.5: using pins 81 (SDA) and 80 (SCL)
  182.  
  183. <6>[ 0.272951] i2c-gpio i2c-gpio.6: using pins 108 (SDA) and 107 (SCL)
  184.  
  185. <6>[ 0.273018] msm_i2c_probe
  186.  
  187. <6>[ 0.273108] msm_i2c_probe: clk_ctl 315, 400000 Hz
  188.  
  189. <6>[ 0.273899] Advanced Linux Sound Architecture Driver Version 1.0.23.
  190.  
  191. <6>[ 0.274354] Bluetooth: Core ver 2.15
  192.  
  193. <6>[ 0.274421] NET: Registered protocol family 31
  194.  
  195. <6>[ 0.274434] Bluetooth: HCI device and connection manager initialized
  196.  
  197. <6>[ 0.274451] Bluetooth: HCI socket layer initialized
  198.  
  199. <6>[ 0.274599] Switching to clocksource dg_timer
  200.  
  201. <6>[ 0.280869] NET: Registered protocol family 2
  202.  
  203. <6>[ 0.281043] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  204.  
  205. <6>[ 0.281484] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  206.  
  207. <6>[ 0.281878] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  208.  
  209. <6>[ 0.282119] TCP: Hash tables configured (established 16384 bind 16384)
  210.  
  211. <6>[ 0.282134] TCP reno registered
  212.  
  213. <6>[ 0.282149] UDP hash table entries: 256 (order: 0, 4096 bytes)
  214.  
  215. <6>[ 0.282178] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  216.  
  217. <6>[ 0.282356] NET: Registered protocol family 1
  218.  
  219. <6>[ 0.282679] RPC: Registered udp transport module.
  220.  
  221. <6>[ 0.282693] RPC: Registered tcp transport module.
  222.  
  223. <6>[ 0.282706] RPC: Registered tcp NFSv4.1 backchannel transport module.
  224.  
  225. <6>[ 0.282934] Trying to unpack rootfs image as initramfs...
  226.  
  227. <6>[ 0.297413] Freeing initrd memory: 148K
  228.  
  229. <6>[ 0.298491] smd probe
  230.  
  231. <6>[ 0.298516] smd_core_init()
  232.  
  233. <6>[ 0.298593] smd_core_init() done
  234.  
  235. <6>[ 0.298609] smd_alloc_loopback_channel: 'local_loopback' cid=100
  236.  
  237. <6>[ 0.299706] smd_alloc_channel() 'DS' cid=0
  238.  
  239. <6>[ 0.299834] smd_alloc_channel() 'DIAG' cid=1
  240.  
  241. <6>[ 0.299933] smd_alloc_channel() 'RPCCALL' cid=2
  242.  
  243. <6>[ 0.300021] smd_alloc_channel() 'DATA1' cid=7
  244.  
  245. <6>[ 0.300119] smd_alloc_channel() 'DATA2' cid=8
  246.  
  247. <6>[ 0.300204] smd_alloc_channel() 'DATA3' cid=9
  248.  
  249. <6>[ 0.300299] smd_alloc_channel() 'DATA4' cid=10
  250.  
  251. <6>[ 0.300398] smd_alloc_channel() 'DATA5' cid=11
  252.  
  253. <6>[ 0.300484] smd_alloc_channel() 'DATA6' cid=12
  254.  
  255. <6>[ 0.300573] smd_alloc_channel() 'DATA7' cid=13
  256.  
  257. <6>[ 0.300678] smd_alloc_channel() 'DAL00' cid=38
  258.  
  259. <6>[ 0.300764] smd_alloc_channel() 'DATA5_CNTL' cid=39
  260.  
  261. <6>[ 0.300854] smd_alloc_channel() 'DATA6_CNTL' cid=40
  262.  
  263. <6>[ 0.300944] smd_alloc_channel() 'DATA7_CNTL' cid=41
  264.  
  265. <3>[ 0.301116] Notify: smsm init
  266.  
  267. <6>[ 0.303313] SMD Packet Port Driver Initialized.
  268.  
  269. <6>[ 0.303769] SMD: ch 2 0 -> 1
  270.  
  271. <6>[ 0.303876] SMD: ch 2 1 -> 2
  272.  
  273. <6>[ 0.304184] [adsp.c:adsp_init] rs3000000a -- 0
  274.  
  275. <6>[ 0.304808] [audpp.c:audpp_probe] Number of decoder supported 5
  276.  
  277. <6>[ 0.304826] [audpp.c:audpp_probe] Number of concurrency supported 8
  278.  
  279. <6>[ 0.304841] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
  280.  
  281. <6>[ 0.304854] [audpp.c:audpp_probe] queueid:13
  282.  
  283. <6>[ 0.304868] [audpp.c:audpp_probe] decid:0
  284.  
  285. <6>[ 0.304879] [audpp.c:audpp_probe] nr_codec_support:11
  286.  
  287. <6>[ 0.304891] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
  288.  
  289. <6>[ 0.304906] [audpp.c:audpp_probe] queueid:14
  290.  
  291. <6>[ 0.304918] [audpp.c:audpp_probe] decid:1
  292.  
  293. <6>[ 0.304929] [audpp.c:audpp_probe] nr_codec_support:11
  294.  
  295. <6>[ 0.304941] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
  296.  
  297. <6>[ 0.304954] [audpp.c:audpp_probe] queueid:15
  298.  
  299. <6>[ 0.304966] [audpp.c:audpp_probe] decid:2
  300.  
  301. <6>[ 0.304979] [audpp.c:audpp_probe] nr_codec_support:11
  302.  
  303. <6>[ 0.304991] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
  304.  
  305. <6>[ 0.305004] [audpp.c:audpp_probe] queueid:16
  306.  
  307. <6>[ 0.305016] [audpp.c:audpp_probe] decid:3
  308.  
  309. <6>[ 0.305028] [audpp.c:audpp_probe] nr_codec_support:11
  310.  
  311. <6>[ 0.305041] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
  312.  
  313. <6>[ 0.305054] [audpp.c:audpp_probe] queueid:17
  314.  
  315. <6>[ 0.305066] [audpp.c:audpp_probe] decid:4
  316.  
  317. <6>[ 0.305078] [audpp.c:audpp_probe] nr_codec_support:1
  318.  
  319. <4>[ 0.306463] diagcmd_probe:lg_fw_diagcmd
  320.  
  321. <6>[ 0.307761] input: ats_input as /devices/virtual/input/input0
  322.  
  323. <6>[ 0.307898] [H2W] gpio_h2w_init
  324.  
  325. <6>[ 0.307946] [H2W] gpio_h2w_probe H2W: Registering H2W (headset) driver
  326.  
  327. <6>[ 0.307956]
  328.  
  329. <6>[ 0.312459] input: h2w headset as /devices/virtual/input/input1
  330.  
  331. <6>[ 0.312693] LGE Power Sink Driver Init
  332.  
  333. <6>[ 0.312746] lge_pwrsink_probe: setting driver data
  334.  
  335. <6>[ 0.312806] lge_mtd_direct_access_init: finished
  336.  
  337. <6>[ 0.329206] [H2W] detection_work
  338.  
  339. <6>[ 0.329233] [H2W] detection_work detection_work-remove_headset
  340.  
  341. <6>[ 0.329241]
  342.  
  343. <6>[ 0.330403] RPC_TIME_TOD_SET_APPS_BASES:
  344.  
  345. <6>[ 0.330409] tick = 71812
  346.  
  347. <6>[ 0.330414] stamp = 1026516069
  348.  
  349. <3>[ 0.330439] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  350.  
  351. <6>[ 0.337286] ashmem: initialized
  352.  
  353. <7>[ 0.338854] yaffs built Mar 23 2013 17:40:06 Installing.
  354.  
  355. <6>[ 0.338913] msgmni has been set to 841
  356.  
  357. <6>[ 0.339094] alg: No test for cipher_null (cipher_null-generic)
  358.  
  359. <6>[ 0.339231] alg: No test for ecb(cipher_null) (ecb-cipher_null)
  360.  
  361. <6>[ 0.339338] alg: No test for digest_null (digest_null-generic)
  362.  
  363. <6>[ 0.339434] alg: No test for compress_null (compress_null-generic)
  364.  
  365. <6>[ 0.342666] alg: No test for stdrng (krng)
  366.  
  367. <6>[ 0.342729] io scheduler noop registered
  368.  
  369. <6>[ 0.342832] io scheduler cfq registered (default)
  370.  
  371. <4>[ 0.343847] AAT28XX init start
  372.  
  373. <6>[ 0.343896] aat2870bl:aat28xx_probe: start, client addr=0x60
  374.  
  375. <7>[ 0.344097] Registered led device: lcd-backlight
  376.  
  377. <3>[ 0.344112] aat2870bl:aat28xx_probe: Registering led class dev successfully.
  378.  
  379. <6>[ 0.344154] aat2870bl:aat28xx_go_opmode: operation mode is normal_mode
  380.  
  381. <6>[ 0.344454] aat2870bl:aat28xx_send_intensity: next current is 13
  382.  
  383. <3>[ 0.344802] aat2870bl:aat28xx_probe: done
  384.  
  385. <6>[ 0.344982] msm_fb_probe: phy_Addr = 0x15968000 virt = 0xde200000
  386.  
  387. <6>[ 0.345527] MDP HW Base phy_Address = 0xaa200000 virt = 0xde100000
  388.  
  389. <6>[ 0.346152] mddi_clk init rate is 160000000
  390.  
  391. <6>[ 0.346277] primary mddi base phy_addr = 0xaa600000 virt = 0xde050000
  392.  
  393. <4>[ 0.357579] mddi_hitachi_lcd_probe: started.
  394.  
  395. <4>[ 0.357662] mddi_hitachi_lcd_init: setting up panel info.
  396.  
  397. <4>[ 0.357919] mddi_hitachi_lcd_probe: started.
  398.  
  399. <4>[ 0.384724] mddi_hitachi_lcd_on: started.
  400.  
  401. <4>[ 0.384984] Console: switching to colour frame buffer device 40x30
  402.  
  403. <6>[ 0.385051] FrameBuffer[0] 320x480 size=614400 bytes is registered successfully!
  404.  
  405. <6>[ 0.385877] msm_serial: driver initialized
  406.  
  407. <6>[ 0.386121] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
  408.  
  409. <6>[ 0.386431] msm_serial_hs module loaded
  410.  
  411. <6>[ 0.389076] brd: module loaded
  412.  
  413. <6>[ 0.391601] loop: module loaded
  414.  
  415. <6>[ 0.391729] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
  416.  
  417. <6>[ 0.391799] pmem: Initializing pmem (user-space) as cached
  418.  
  419. <6>[ 0.392819] pmem: Initializing pmem_adsp (user-space) as non-cached
  420.  
  421. <6>[ 0.393366] pmem: Initializing pmem_audio (user-space) as non-cached
  422.  
  423. <6>[ 0.393692] LGE: Android Vibrator Driver Init
  424.  
  425. <6>[ 0.394122] LGE: Android Vibrator Initialization was done
  426.  
  427. <4>[ 0.394369] [Touch] gelato_vibrator_power_set() onoff:0
  428.  
  429. <6>[ 0.395122] SCSI Media Changer driver v0.25
  430.  
  431. <6>[ 0.395644] msm_nand_probe: phys addr 0xa0a00000
  432.  
  433. <6>[ 0.395664] msm_nand_probe: dmac 0x7
  434.  
  435. <6>[ 0.395709] msm_nand_probe: allocated dma buffer at ffc0f000, dma_addr 2f594000
  436.  
  437. <6>[ 0.396201] ONFI probe : CRC Check failed on ONFI Parameter data
  438.  
  439. <6>[ 0.396247] status: c00020
  440.  
  441. <6>[ 0.396259] nandid: 5590bcad maker ad device bc
  442.  
  443. <6>[ 0.396279] Found a supported NAND device
  444.  
  445. <6>[ 0.396289] NAND Id : 0x5590bcad
  446.  
  447. <6>[ 0.396299] Buswidth : 16 Bits
  448.  
  449. <6>[ 0.396309] Density : 512 MByte
  450.  
  451. <6>[ 0.396319] Pagesize : 2048 Bytes
  452.  
  453. <6>[ 0.396327] Erasesize: 131072 Bytes
  454.  
  455. <6>[ 0.396337] Oobsize : 64 Bytes
  456.  
  457. <6>[ 0.396349] CFG0 Init : 0xa85408c0
  458.  
  459. <6>[ 0.396359] CFG1 Init : 0x0004745e
  460.  
  461. <6>[ 0.396369] ECCBUFCFG : 0x00000203
  462.  
  463. <5>[ 0.396389] Creating 10 MTD partitions on "msm_nand":
  464.  
  465. <5>[ 0.396409] 0x000002880000-0x000002d80000 : "boot"
  466.  
  467. <5>[ 0.399556] 0x000002d80000-0x00000a0a0000 : "cache"
  468.  
  469. <5>[ 0.454513] 0x00000a0a0000-0x00000a7a0000 : "recovery"
  470.  
  471. <5>[ 0.458630] 0x00000a7a0000-0x00000a8e0000 : "splash"
  472.  
  473. <5>[ 0.460020] 0x00000a8e0000-0x00000a9e0000 : "FOTA"
  474.  
  475. <5>[ 0.461314] 0x00000a9e0000-0x00000aae0000 : "FOTA_STO"
  476.  
  477. <5>[ 0.462618] 0x00000aae0000-0x0000148e0000 : "system"
  478.  
  479. <5>[ 0.538244] 0x0000148e0000-0x00001fde0000 : "userdata"
  480.  
  481. <5>[ 0.624691] 0x00001fde0000-0x00001fe60000 : "misc"
  482.  
  483. <5>[ 0.625707] 0x00001fe60000-0x00001ffe0000 : "persist"
  484.  
  485. <6>[ 0.627336] PPP generic driver version 2.4.2
  486.  
  487. <6>[ 0.627542] PPP Deflate Compression module registered
  488.  
  489. <6>[ 0.627557] PPP BSD Compression module registered
  490.  
  491. <6>[ 0.628472] PPP MPPE Compression module registered
  492.  
  493. <6>[ 0.628492] NET: Registered protocol family 24
  494.  
  495. <6>[ 0.628551] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  496.  
  497. <6>[ 0.628569] CSLIP: code copyright 1989 Regents of the University of California.
  498.  
  499. <4>[ 0.629047] brcm_static_buf_init: initialize wifi_alloc_data
  500.  
  501. <4>[ 0.629087] Section [3] initial allocation success size[139264]!!!
  502.  
  503. <4>[ 0.629107] Section [2] initial allocation success size[32768]!!!
  504.  
  505. <4>[ 0.629122] Section [1] initial allocation success size[12288]!!!
  506.  
  507. <4>[ 0.629141] Section [0] initial allocation success size[12288]!!!
  508.  
  509. <4>[ 0.629212] rmnet_init
  510.  
  511. <6>[ 0.633532] __msm_rpc_connect: server not found 3000001a:40001
  512.  
  513. <6>[ 0.633554] __msm_rpc_connect: server not found 3000001a:30001
  514.  
  515. <6>[ 0.633571] __msm_rpc_connect: server not found 3000001a:20001
  516.  
  517. <6>[ 0.633974] peripheral driver registered w/ tranceiver
  518.  
  519. <6>[ 0.637289] MANUAL_TEST_MODE nv : 0 out_len=4
  520.  
  521. <6>[ 0.712907] msm_chg_LG_cable_type: 1
  522.  
  523.  
  524. <3>[ 0.714949] LG_FW :: do_get_usb_serial_number Serail number A10000199C9522
  525.  
  526. <6>[ 0.717326] android_usb gadget: android_usb ready
  527.  
  528. <6>[ 0.717471] f_acm.c init
  529.  
  530. <3>[ 0.717484] android_register_function func:acm bind
  531.  
  532. <3>[ 0.717496] usb_diag_init
  533.  
  534. <3>[ 0.717569] android_register_function func:diag bind
  535.  
  536. <6>[ 0.717641] f_ecm init
  537.  
  538. <3>[ 0.717751] android_register_function func:cdc_ethernet bind
  539.  
  540. <6>[ 0.717762] f_serial init
  541.  
  542. <3>[ 0.717774] android_register_function func:nmea bind
  543.  
  544. <3>[ 0.717786] usb_mass_storage init
  545.  
  546. <3>[ 0.717897] android_register_function func:usb_mass_storage bind
  547.  
  548. <3>[ 0.717912] android_register_function func:adb bind
  549.  
  550. <6>[ 0.718679] ecm_function_add MAC: 00:00:00:00:00:00
  551.  
  552. <4>[ 0.718727] android_usb gadget: using random self ethernet address
  553.  
  554. <4>[ 0.718754] android_usb gadget: using random host ethernet address
  555.  
  556. <6>[ 0.719246] usb0: MAC 6a:48:e5:68:f2:2e
  557.  
  558. <6>[ 0.719261] usb0: HOST MAC 46:b2:c7:f7:4d:89
  559.  
  560. <6>[ 0.719276] ecm_bind_config: iMACAddress = 9
  561.  
  562. <6>[ 0.720136] diagfwd initializing ..
  563.  
  564. <6>[ 0.720457] SMD: ch 1 0 -> 1
  565.  
  566. <6>[ 0.720474] diag opened SMD port ; r = 0
  567.  
  568. <6>[ 0.720557] SMD: ch 1 1 -> 2
  569.  
  570. <6>[ 0.720602] diagchar initializing ..
  571.  
  572. <6>[ 0.720816] diagchar initialized
  573.  
  574. <6>[ 0.834959] input: kbd_pp2106 as /devices/platform/kbd_pp2106/input/input2
  575.  
  576. <4>[ 0.835382] [Touch] ts_set_vreg() onoff:1, ts_power_on=0
  577.  
  578. <6>[ 1.160734] msm_chg_LG_cable_type: 1
  579.  
  580.  
  581. <6>[ 1.163604] MANUAL_TEST_MODE nv : 0 out_len=4
  582.  
  583. <6>[ 1.346221] synaptics_ts_probe : product_name = TM1827-001
  584.  
  585. <6>[ 1.346239] synaptics_ts_probe : name_of_product = 0
  586.  
  587. <6>[ 1.346637] synaptics_ts_probe: Customer family 0x1
  588.  
  589. <6>[ 1.347032] synaptics_ts_probe: Firmware Revision 0x4
  590.  
  591. <6>[ 1.348932] synaptics_ts_probe : max_x = 0x386
  592.  
  593. <6>[ 1.348944] synaptics_ts_probe : max_y = 0x549
  594.  
  595. <6>[ 1.349341] synaptics_ts_probe: GESTURE_ENABLE1_REG 0x0
  596.  
  597. <6>[ 1.349636] synaptics_ts_probe: GESTURE_ENABLE1_REG write 0x0
  598.  
  599. <6>[ 1.350032] synaptics_ts_probe: GESTURE_ENABLE2_REG 0x1
  600.  
  601. <6>[ 1.350327] synaptics_ts_probe: GESTURE_ENABLE2_REG write 0x0
  602.  
  603. <6>[ 1.352266] input: synaptics-rmi-ts as /devices/virtual/input/input3
  604.  
  605. <4>[ 1.354649] mddi_hitachi_vsync_set_handler : handler = c0256290
  606.  
  607. <6>[ 1.356456] MANUAL_TEST_MODE nv : 0 out_len=4
  608.  
  609. <3>[ 1.356471] synaptics_ts_probe: lge_manual_test_mode = 0
  610.  
  611. <6>[ 1.356557] synaptics_ts_probe: Start touchscreen synaptics-rmi-ts in interrupt mode
  612.  
  613. <6>[ 1.356854] GPIO Matrix Keypad Driver: Start keypad matrix for gelato_keypad in interrupt mode
  614.  
  615. <6>[ 1.357096] input: gelato_keypad as /devices/virtual/input/input4
  616.  
  617. <6>[ 1.357621] bu52031_probe : start
  618.  
  619. <6>[ 1.357636] bu52031_probe : irq = 18, prohibit_time = 100
  620.  
  621. <6>[ 1.357851] input: hall-ic as /devices/platform/hall-ic/input/input5
  622.  
  623. <6>[ 1.357984] bu52031_probe : dev->irq_num = 82, hallic_dev->irq_num = 82
  624.  
  625. <6>[ 1.358019] bu52031_irq_handler start : irq = 82, dev_id = 0xdd49afa0
  626.  
  627. <6>[ 1.358036] bu52031_irq_handler : read value = 0
  628.  
  629. <6>[ 1.358049] hall_ic_report_event start : state = 0
  630.  
  631. <6>[ 1.358062] hall_ic_report_event : report event = 1
  632.  
  633. <3>[ 1.358271] android-hall_ic: hall_ic_probe: Done
  634.  
  635. <6>[ 1.359037] synaptics_ts_fw_angent : F/W version is up-to-date
  636.  
  637. <6>[ 1.359407] input: proximity as /devices/virtual/input/input6
  638.  
  639. <6>[ 1.359549] proximity_apds9190 5-0039: enable = 0
  640.  
  641. <6>[ 1.359567] aat2870bl:aat28xx_ldo_set_level: ldo_no[1], level[3000]
  642.  
  643. <6>[ 1.359586] aat2870bl:aat28xx_ldo_set_level: vout register value 0xc for level 3000
  644.  
  645. <6>[ 1.359604] aat2870bl:aat28xx_ldo_set_vout: target register[0x0], value[0xc0]
  646.  
  647. <6>[ 1.359891] aat2870bl:aat28xx_ldo_enable: ldo_no[1], on/off[1]
  648.  
  649. <6>[ 1.359906] aat2870bl:aat28xx_ldo_enable: ref count = 0, call aat28xx_set_ldos
  650.  
  651. <6>[ 1.359922] aat2870bl:aat28xx_set_ldos: enable ldos, reg:0x13 value:0x1
  652.  
  653. <4>[ 1.414851] apds9190_suspend [63], proximity_wq=-582371712
  654.  
  655. <6>[ 1.415174] apds9190_set_command, clear [CMD_CLR_PS_ALS_INT]
  656.  
  657. <6>[ 1.415767] aat2870bl:aat28xx_ldo_set_level: ldo_no[1], level[0]
  658.  
  659. <6>[ 1.415784] aat2870bl:aat28xx_ldo_set_level: vout register value 0xff for level 0
  660.  
  661. <6>[ 1.415802] aat2870bl:aat28xx_ldo_set_vout: target register[0x0], value[0xf0]
  662.  
  663. <6>[ 1.416081] aat2870bl:aat28xx_ldo_enable: ldo_no[1], on/off[0]
  664.  
  665. <6>[ 1.416096] aat2870bl:aat28xx_ldo_enable: ref count = 0, call aat28xx_set_ldos
  666.  
  667. <6>[ 1.416112] aat2870bl:aat28xx_set_ldos: enable ldos, reg:0x13 value:0x0
  668.  
  669. <6>[ 1.416522] apds9190_suspend, Destroy workqueue
  670.  
  671. <6>[ 1.416591] K3DH accelerometer driver
  672.  
  673. <4>[ 1.416637] (null), K3DH Power On
  674.  
  675. <6>[ 1.454619] bu52031_timer start
  676.  
  677. <6>[ 1.454634] bu52031_timer : current_state = 0 / last_state = 0
  678.  
  679. <6>[ 1.518617] k3dh_update_odr, polling Hz : 103
  680.  
  681. <6>[ 1.519116] input: accelerometer as /devices/virtual/input/input7
  682.  
  683. <6>[ 1.519399] K3DH 4-0019: K3DH k3dh: Accelerometer chip found
  684.  
  685. <4>[ 1.519494] [Ecompass] ecom_power_set() onoff 1, prev_status 1
  686.  
  687. <6>[ 1.522172] ami306_sensor 6-000e: force operating mode
  688.  
  689. <6>[ 1.522185] Register input device!
  690.  
  691. <6>[ 1.522404] input: Acompass as /devices/virtual/input/input8
  692.  
  693. <4>[ 1.522904] ######## bthid_init: ########
  694.  
  695. <4>[ 1.523010] ######## bthid_init: done ########
  696.  
  697. <7>[ 1.523305] RTC Registering with rs30000048
  698.  
  699. <3>[ 1.524179] msm_rpc_client_req: RPC call was not successful (3)
  700.  
  701. <7>[ 1.524199] msmrtc_setup_cb: RPC client registration for PROC:12 failed
  702.  
  703. <7>[ 1.524215] rs30000048 rs30000048.65536: msmrtc_probe: Could not initialize RPC callback
  704.  
  705. <6>[ 1.524770] using rtc device, msm_rtc, for alarms
  706.  
  707. <7>[ 1.524792] msm_rtc: dev (254:0)
  708.  
  709. <6>[ 1.524830] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
  710.  
  711. <7>[ 1.525020] msm_rtc_secure: dev (254:1)
  712.  
  713. <6>[ 1.525035] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
  714.  
  715. <6>[ 1.525105] i2c /dev entries driver
  716.  
  717. <6>[ 1.526077] IR NEC protocol handler initialized
  718.  
  719. <6>[ 1.526092] IR RC5(x) protocol handler initialized
  720.  
  721. <6>[ 1.526104] IR RC6 protocol handler initialized
  722.  
  723. <6>[ 1.526115] IR JVC protocol handler initialized
  724.  
  725. <6>[ 1.526127] IR Sony protocol handler initialized
  726.  
  727. <6>[ 1.526139] Linux video capture interface: v2.00
  728.  
  729. <6>[ 1.526347] battery rpc: ept : 0xdd4a8b80, prog : 0x30000089, vers : 0x10001
  730.  
  731. <6>[ 1.526370] charger rpc: ept : 0xdd4a8a80, prog : 0x3000001a, vers : 0x10003
  732.  
  733. <6>[ 1.526914] msm_batt_get_charger_api_version(): num_of_chg_api_versions = 4 The chg api version = 0x00010004
  734.  
  735. <6>[ 1.528020] batt_clnt_handle = 0
  736.  
  737. <6>[ 1.529130] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
  738.  
  739. <6>[ 1.529207] Bluetooth: HCI UART driver ver 2.2
  740.  
  741. <6>[ 1.529224] Bluetooth: HCI H4 protocol initialized
  742.  
  743. <6>[ 1.529235] Bluetooth: HCI BCSP protocol initialized
  744.  
  745. <6>[ 1.529249] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  746.  
  747. <4>[ 1.530964] mmc0: mmc power down
  748.  
  749. <4>[ 1.530992] <choi> mmc_start_host hostname mmc0
  750.  
  751. <6>[ 1.531012] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
  752.  
  753. <6>[ 1.531027] mmc0: 8 bit data mode disabled
  754.  
  755. <6>[ 1.531039] mmc0: 4 bit data mode enabled
  756.  
  757. <6>[ 1.531050] mmc0: polling status mode disabled
  758.  
  759. <6>[ 1.531064] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
  760.  
  761. <6>[ 1.531079] mmc0: Slot eject status = 0
  762.  
  763. <6>[ 1.531089] mmc0: Power save feature enable = 1
  764.  
  765. <6>[ 1.531105] mmc0: DM non-cached buffer at ffc13000, dma_addr 0x2f6d8000
  766.  
  767. <6>[ 1.531120] mmc0: DM cmd busaddr 0x2f6d8000, cmdptr busaddr 0x2f6d8300
  768.  
  769. <4>[ 1.531349] mmc1 : slot set f_max [24576000]
  770.  
  771. <4>[ 1.531362] mmc1 : slot set MMC_CAP_SD_HIGHSPEED
  772.  
  773. <3>[ 1.531419] bcm432x_sdcc_wlan_slot_status: 23 0
  774.  
  775. <4>[ 1.532179] mmc0: mmc power up
  776.  
  777. <4>[ 1.532267] <choi> msmsdcc_check_status start
  778.  
  779. <4>[ 1.532282] <choi> msmsdcc_check_status end
  780.  
  781. <4>[ 1.532574] mmc1: mmc power down
  782.  
  783. <4>[ 1.532589] <choi> mmc_start_host hostname mmc1
  784.  
  785. <6>[ 1.532609] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,87 dma 8
  786.  
  787. <6>[ 1.532622] mmc1: 8 bit data mode disabled
  788.  
  789. <6>[ 1.532634] mmc1: 4 bit data mode enabled
  790.  
  791. <6>[ 1.532645] mmc1: polling status mode disabled
  792.  
  793. <6>[ 1.532659] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
  794.  
  795. <6>[ 1.532674] mmc1: Slot eject status = 1
  796.  
  797. <6>[ 1.532684] mmc1: Power save feature enable = 1
  798.  
  799. <6>[ 1.532699] mmc1: DM non-cached buffer at ffc14000, dma_addr 0x2f6db000
  800.  
  801. <6>[ 1.532715] mmc1: DM cmd busaddr 0x2f6db000, cmdptr busaddr 0x2f6db300
  802.  
  803. <7>[ 1.533019] Registered led device: keyboard-backlight
  804.  
  805. <4>[ 1.533044] [MAINKEY BACKLIGHT] keypad_led_set() off:0, mValue:-1
  806.  
  807. <7>[ 1.533125] Registered led device: button-backlight
  808.  
  809. <7>[ 1.533204] Registered led device: red
  810.  
  811. <7>[ 1.533279] Registered led device: green
  812.  
  813. <7>[ 1.533360] Registered led device: blue
  814.  
  815. <4>[ 1.533664] <choi> msmsdcc_check_status start
  816.  
  817. <3>[ 1.533682] bcm432x_sdcc_wlan_slot_status: 23 0
  818.  
  819. <4>[ 1.533694] <choi> msmsdcc_check_status end
  820.  
  821. <6>[ 1.534087] logger: created 64K log 'log_main'
  822.  
  823. <6>[ 1.534224] logger: created 256K log 'log_events'
  824.  
  825. <6>[ 1.534345] logger: created 64K log 'log_radio'
  826.  
  827. <6>[ 1.534460] logger: created 64K log 'log_system'
  828.  
  829. <4>[ 1.534969] No device for DAI CODEC_DAI
  830.  
  831. <4>[ 1.534985] No device for DAI CPU_DAI
  832.  
  833. <3>[ 1.535265] msm_soc: create pcms
  834.  
  835. <6>[ 1.535519] asoc: CODEC_DAI <-> CPU_DAI mapping ok
  836.  
  837. <3>[ 1.535534] msm_soc: ALSA MSM Mixer Setting
  838.  
  839. <6>[ 1.536162] ALSA device list:
  840.  
  841. <6>[ 1.536179] #0: msm-audio (MSM-CARD)
  842.  
  843. <6>[ 1.536282] u32 classifier
  844.  
  845. <6>[ 1.536295] Netfilter messages via NETLINK v0.30.
  846.  
  847. <6>[ 1.536390] nf_conntrack version 0.5.0 (6729 buckets, 26916 max)
  848.  
  849. <6>[ 1.536855] ctnetlink v0.93: registering with nfnetlink.
  850.  
  851. <6>[ 1.537014] xt_time: kernel timezone is -0000
  852.  
  853. <6>[ 1.537284] ip_tables: (C) 2000-2006 Netfilter Core Team
  854.  
  855. <6>[ 1.537399] arp_tables: (C) 2002 David S. Miller
  856.  
  857. <6>[ 1.537465] TCP cubic registered
  858.  
  859. <6>[ 1.537475] Initializing XFRM netlink socket
  860.  
  861. <6>[ 1.537760] NET: Registered protocol family 10
  862.  
  863. <6>[ 1.538334] lo: Disabled Privacy Extensions
  864.  
  865. <6>[ 1.539859] Mobile IPv6
  866.  
  867. <6>[ 1.539875] IPv6 over IPv4 tunneling driver
  868.  
  869. <6>[ 1.540442] sit0: Disabled Privacy Extensions
  870.  
  871. <6>[ 1.541062] ip6tnl0: Disabled Privacy Extensions
  872.  
  873. <6>[ 1.541215] NET: Registered protocol family 17
  874.  
  875. <6>[ 1.541262] NET: Registered protocol family 15
  876.  
  877. <6>[ 1.541449] Bluetooth: L2CAP ver 2.14
  878.  
  879. <6>[ 1.541464] Bluetooth: L2CAP socket layer initialized
  880.  
  881. <6>[ 1.541484] Bluetooth: SCO (Voice Link) ver 0.6
  882.  
  883. <6>[ 1.541495] Bluetooth: SCO socket layer initialized
  884.  
  885. <6>[ 1.541602] Bluetooth: RFCOMM TTY layer initialized
  886.  
  887. <6>[ 1.541622] Bluetooth: RFCOMM socket layer initialized
  888.  
  889. <6>[ 1.541634] Bluetooth: RFCOMM ver 1.11
  890.  
  891. <6>[ 1.541647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  892.  
  893. <6>[ 1.541660] Bluetooth: BNEP filters: protocol multicast
  894.  
  895. <6>[ 1.541674] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  896.  
  897. <6>[ 1.541805] L2TP core driver, V2.0
  898.  
  899. <6>[ 1.541832] PPPoL2TP kernel driver, V2.0
  900.  
  901. <6>[ 1.544209] input: 7k_handset as /devices/virtual/input/input9
  902.  
  903. <6>[ 1.544480] __msm_rpc_connect: server not found 30000091:30001
  904.  
  905. <3>[ 1.546680] msm_rpc_client_req: RPC call was not successful (4)
  906.  
  907. <3>[ 1.546702] hs_rpc_cb_init: RPC client request failed for pwr key delay cmd, using normal mode
  908.  
  909. <6>[ 1.546847] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  910.  
  911. <7>[ 1.549714] msmrtc_tod_proc_result: 01/06/1980 00:00:03 (06)
  912.  
  913. <6>[ 1.549759] rs30000048 rs30000048.65536: setting system clock to 1980-01-06 00:00:03 UTC (315964803)
  914.  
  915. <6>[ 1.549782] msm_v4l2: msm_v4l2_init
  916.  
  917. <3>[ 1.550367] [smiledice] >> isx005_sensor_probe START
  918.  
  919. <3>[ 1.550382] [smiledice] [CHECK] i2c_add_driver (isx005_i2c_driver.probe: -1070348128)
  920.  
  921. <3>[ 1.550442] [smiledice] >> isx005_i2c_probe START
  922.  
  923. <3>[ 1.550457] isx005_probe succeeded!
  924.  
  925. <3>[ 1.550467] [smiledice] << isx005_i2c_probe END : rc = 0
  926.  
  927. <3>[ 1.550544] drivers/media/video/msm/hi351_tun.c isx005_sensor_probe:4847
  928.  
  929. <3>[ 1.550559] [smiledice] << isx005_sensor_probe END : rc = 0
  930.  
  931. <6>[ 1.550997] msm_sync_init: initialized isx005
  932.  
  933. <4>[ 1.551679] Warning: unable to open an initial console.
  934.  
  935. <6>[ 1.551739] Freeing init memory: 156K
  936.  
  937. <3>[ 1.555909] init: /init.gelato.rc: 216: invalid command '/system/bin/log'
  938.  
  939. <3>[ 1.704085] init: cannot open '/initlogo.rle'
  940.  
  941. <6>[ 1.719285] yaffs: yaffs_internal_read_super start, set readsuper 1
  942.  
  943. <6>[ 1.719312] yaffs: dev is 32505862 name is "mtdblock6" rw
  944.  
  945. <6>[ 1.719325] yaffs: passed flags ""
  946.  
  947. <7>[ 1.719340] yaffs: Attempting MTD mount of 31.6,"mtdblock6"
  948.  
  949. <7>[ 1.778938] yaffs: restored from checkpoint
  950.  
  951. <7>[ 1.779393] yaffs_read_super: isCheckpointed 1
  952.  
  953. <6>[ 1.779591] yaffs: yaffs_internal_read_super start, set readsuper 1
  954.  
  955. <6>[ 1.779613] yaffs: dev is 32505863 name is "mtdblock7" rw
  956.  
  957. <6>[ 1.779626] yaffs: passed flags ""
  958.  
  959. <7>[ 1.779639] yaffs: Attempting MTD mount of 31.7,"mtdblock7"
  960.  
  961. <4>[ 1.832853] mmc0: host does not support reading read-only switch. assuming write-enable.
  962.  
  963. <6>[ 1.832888] mmc0: new high speed SDHC card at address 0002
  964.  
  965. <6>[ 1.833351] mmcblk0: mmc0:0002 00000 7.41 GiB
  966.  
  967. <6>[ 1.833715] mmcblk0: p1
  968.  
  969. <4>[ 1.835963] mmc1: mmc power up
  970.  
  971. <4>[ 1.878031] mmc1: mmc power down
  972.  
  973. <6>[ 2.154652]
  974.  
  975. <6>[ 2.154658] Charger Type: STD DOWNSTREAM PORT
  976.  
  977. <6>[ 2.450887] android_usb gadget: high speed config #1: android
  978.  
  979. <7>[ 2.451004] diag: USB connected
  980.  
  981. <7>[ 4.059489] yaffs_read_super: isCheckpointed 0
  982.  
  983. <6>[ 4.059698] yaffs: yaffs_internal_read_super start, set readsuper 1
  984.  
  985. <6>[ 4.059718] yaffs: dev is 32505865 name is "mtdblock9" rw
  986.  
  987. <6>[ 4.059731] yaffs: passed flags ""
  988.  
  989. <7>[ 4.059744] yaffs: Attempting MTD mount of 31.9,"mtdblock9"
  990.  
  991. <7>[ 4.068566] yaffs_read_super: isCheckpointed 0
  992.  
  993. <6>[ 4.068692] yaffs: yaffs_internal_read_super start, set readsuper 1
  994.  
  995. <6>[ 4.068712] yaffs: dev is 32505857 name is "mtdblock1" rw
  996.  
  997. <6>[ 4.068724] yaffs: passed flags ""
  998.  
  999. <7>[ 4.068737] yaffs: Attempting MTD mount of 31.1,"mtdblock1"
  1000.  
  1001. <7>[ 4.071269] yaffs: restored from checkpoint
  1002.  
  1003. <7>[ 4.071389] yaffs_read_super: isCheckpointed 1
  1004.  
  1005. <3>[ 4.134602] init: cannot find '/system/bin/lge_ers_rpcd', disabling 'lge_ers_rpcd'
  1006.  
  1007. <3>[ 4.136780] init: cannot find '/sbin/bootlogo', disabling 'bootlogo'
  1008.  
  1009. <3>[ 4.145114] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  1010.  
  1011. <3>[ 4.153070] init: cannot find '/system/bin/cnd', disabling 'cnd'
  1012.  
  1013. <3>[ 4.154405] init: cannot find '/system/bin/netmgrd', disabling 'netmgrd'
  1014.  
  1015. <3>[ 4.154908] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
  1016.  
  1017. <6>[ 4.265470] warning: `adbd' uses 32-bit capabilities (legacy support in use)
  1018.  
  1019. <3>[ 4.266872] boot return adb_enable_open
  1020.  
  1021. <6>[ 4.288988] SMD: ch 39 0 -> 1
  1022.  
  1023. <6>[ 4.289083] SMD: ch 39 1 -> 2
  1024.  
  1025. <6>[ 4.292700] SMD: ch 40 0 -> 1
  1026.  
  1027. <6>[ 4.292780] SMD: ch 40 1 -> 2
  1028.  
  1029. <6>[ 4.293043] SMD: ch 41 0 -> 1
  1030.  
  1031. <6>[ 4.293157] SMD: ch 41 1 -> 2
  1032.  
  1033. <3>[ 4.293347] smd_pkt_open: DATA8_CNTL open failed -19
  1034.  
  1035. <3>[ 4.293415] smd_pkt_open: DATA9_CNTL open failed -19
  1036.  
  1037. <3>[ 4.293457] smd_pkt_open: DATA12_CNTL open failed -19
  1038.  
  1039. <3>[ 4.293497] smd_pkt_open: DATA13_CNTL open failed -19
  1040.  
  1041. <3>[ 4.293557] smd_pkt_open: DATA14_CNTL open failed -19
  1042.  
  1043. <6>[ 5.135216] [snd.c:snd_ioctl] snd_avc_ctl 0
  1044.  
  1045. <6>[ 5.136057] [snd.c:snd_ioctl] snd_agc_ctl 1
  1046.  
  1047. <6>[ 5.138281] [snd.c:snd_ioctl] snd_set_volume 10 0 7
  1048.  
  1049. <6>[ 5.138866] [snd.c:snd_ioctl] snd_set_volume 11 0 21
  1050.  
  1051. <6>[ 5.139427] [snd.c:snd_ioctl] snd_set_volume 6 0 7
  1052.  
  1053. <6>[ 5.139947] [snd.c:snd_ioctl] snd_set_volume 0 0 7
  1054.  
  1055. <6>[ 5.140525] [snd.c:snd_ioctl] snd_set_volume 13 0 7
  1056.  
  1057. <6>[ 5.141159] [snd.c:snd_ioctl] snd_set_volume 2 0 7
  1058.  
  1059. <6>[ 5.141667] [snd.c:snd_ioctl] snd_set_volume 7 0 7
  1060.  
  1061. <6>[ 5.142209] [snd.c:snd_ioctl] snd_set_volume 8 0 7
  1062.  
  1063. <6>[ 5.142742] [snd.c:snd_ioctl] snd_set_volume 15 0 7
  1064.  
  1065. <6>[ 5.143314] [snd.c:snd_ioctl] snd_set_volume 17 0 7
  1066.  
  1067. <6>[ 5.144039] [snd.c:snd_ioctl] snd_set_volume 16 0 7
  1068.  
  1069. <6>[ 5.145567] snd_set_fm_radio_volume 20
  1070.  
  1071. <6>[ 5.146102] [snd.c:snd_ioctl] snd_set_volume 3 0 7
  1072.  
  1073. <6>[ 5.166785] msm_release_control: control0
  1074.  
  1075. <6>[ 5.166875] __msm_release, open count =0
  1076.  
  1077. <6>[ 5.166888] __msm_release, vfe_release
  1078.  
  1079. <6>[ 5.166902] __msm_release, free frame pmem region
  1080.  
  1081. <6>[ 5.166913] __msm_release, free stats pmem region
  1082.  
  1083. <6>[ 5.166927] __msm_release: draining queue pict
  1084.  
  1085. <6>[ 5.166942] __msm_release: completed
  1086.  
  1087. <6>[ 5.166952] msm_release_control: draining queue control
  1088.  
  1089. <6>[ 5.166967] msm_release_control, completed
  1090.  
  1091. <6>[ 5.181655] [snd.c:snd_ioctl] snd_set_device 0 1 1
  1092.  
  1093. <6>[ 5.286691] [snd.c:snd_ioctl] snd_set_volume 30 0 7
  1094.  
  1095. <6>[ 10.510732] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
  1096.  
  1097. <4>[ 14.687119] [Touch] gelato_vibrator_power_set() onoff:0
  1098.  
  1099. <4>[ 15.154377]
  1100.  
  1101. <4>[ 15.154384] Dongle Host Driver, version 5.90.100.14
  1102.  
  1103. <4>[ 15.154447] <choi> msmsdcc_check_status start
  1104.  
  1105. <3>[ 15.154464] bcm432x_sdcc_wlan_slot_status: 23 1
  1106.  
  1107. <4>[ 15.154474] <choi> msmsdcc_check_status status changed 1
  1108.  
  1109. <3>[ 15.154486] [host->plat->status_irq:87:MSM_GPIO_TO_INIT:87:msmsdcc_check_status:1409]
  1110.  
  1111. <4>[ 15.154567] <choi> msmsdcc_check_status end
  1112.  
  1113. <4>[ 15.294919] mmc1: mmc power up
  1114.  
  1115. <6>[ 15.362569] [snd.c:snd_ioctl] snd_set_volume 30 0 6
  1116.  
  1117. <6>[ 15.388653] mmc1: new high speed SDIO card at address 0001
  1118.  
  1119. <4>[ 15.391575] dhd_customer_oob_irq_map: customer specific Host GPIO number is (94)
  1120.  
  1121. <4>[ 15.391613] mem_prealloc: section [3] size[139264]
  1122.  
  1123. <4>[ 15.391626] mem_prealloc: This data is using!!!
  1124.  
  1125. <4>[ 15.391836] alloc static buf at dd400000!
  1126.  
  1127. <4>[ 15.391848] mem_prealloc: section [4] size[0]
  1128.  
  1129. <4>[ 15.400836] DHD: dongle ram size is set to 294912(orig 294912)
  1130.  
  1131. <4>[ 15.400966] mem_prealloc: section [0] size[10312]
  1132.  
  1133. <4>[ 15.400979] mem_prealloc: This data is using!!!
  1134.  
  1135. <4>[ 15.401138] wl_iw_init_ss_cache_ctrl :
  1136.  
  1137. <4>[ 15.401264] mem_prealloc: section [1] size[10300]
  1138.  
  1139. <4>[ 15.401278] mem_prealloc: This data is using!!!
  1140.  
  1141. <4>[ 15.401304] mem_prealloc: section [2] size[32768]
  1142.  
  1143. <4>[ 15.401316] mem_prealloc: This data is using!!!
  1144.  
  1145. <4>[ 15.694374] wlan0: Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
  1146.  
  1147. <4>[ 15.694390] wl_iw_iscan_set_scan_broadcast_prep: First Brodcast scan was forced
  1148.  
  1149. <4>[ 15.694415] Enter wl_control_wl_start
  1150.  
  1151. <4>[ 15.694424] Exited wl_control_wl_start
  1152.  
  1153. <4>[ 15.701555] +++: Set Broadcast ISCAN
  1154.  
  1155. <4>[ 15.859872] [Touch] gelato_vibrator_power_set() onoff:0
  1156.  
  1157. <6>[ 15.879695] request_suspend_state: wakeup (3->0) at 15885166664 (1980-01-06 00:00:17.822624996 UTC)
  1158.  
  1159. <4>[ 15.882283] [SUBKEY BACKLIGHT] maxim_pmic_subkey_backlight_set() on:255, mValue:-1
  1160.  
  1161. <4>[ 15.883145] [Touch] gelato_vibrator_power_set() onoff:1
  1162.  
  1163. <4>[ 15.884110] [Touch] gelato_vibrator_power_set() onoff:0
  1164.  
  1165. <4>[ 15.905081] [Touch] gelato_vibrator_power_set() onoff:1
  1166.  
  1167. <6>[ 15.914376] aat2870bl:leds_brightness_set: input brightness value=8]
  1168.  
  1169. <6>[ 15.914406] aat2870bl:leds_brightness_set: brightness[current=13, next=8]
  1170.  
  1171. <6>[ 15.914425] aat2870bl:aat28xx_send_intensity: next current is 8
  1172.  
  1173. <4>[ 15.936071] [Touch] gelato_vibrator_power_set() onoff:0
  1174.  
  1175. <4>[ 16.863806] wl_iw_event: dev=wlan0 event=26
  1176.  
  1177. <4>[ 16.864986] results->count = 2
  1178.  
  1179. <4>[ 16.865003] results->buflen = 432
  1180.  
  1181. <4>[ 16.865016] iscanresults complete
  1182.  
  1183. <4>[ 16.865056] Send Event ISCAN complete
  1184.  
  1185. <4>[ 16.926394] wlan0: SIOCSIWMODE
  1186.  
  1187. <4>[ 16.926969] wlan0: SIOCSIWCOMMIT
  1188.  
  1189. <4>[ 16.928089] wlan0: SIOCGIWRANGE
  1190.  
  1191. <4>[ 16.930519] wlan0: SIOCGIWMODE
  1192.  
  1193. <4>[ 16.931066] wlan0: SIOCSIWAP
  1194.  
  1195. <4>[ 16.956420] wlan0: SIOCSIWAUTH, IW_AUTH_WPA_ENABLED(7), paramval = 0x1
  1196.  
  1197. <4>[ 16.956852] wlan0: SIOCSIWENCODEEXT
  1198.  
  1199. <4>[ 16.957462] wlan0: SIOCSIWENCODEEXT
  1200.  
  1201. <4>[ 16.957865] wlan0: SIOCSIWENCODEEXT
  1202.  
  1203. <4>[ 16.958262] wlan0: SIOCSIWENCODEEXT
  1204.  
  1205. <4>[ 16.958659] wlan0: SIOCSIWAUTH, IW_AUTH_TKIP_COUNTERMEASURES(4), paramval = 0x0
  1206.  
  1207. <4>[ 16.959234] wlan0: SIOCSIWAUTH, IW_AUTH_DROP_UNENCRYPTED(5), paramval = 0x1
  1208.  
  1209. <4>[ 17.090843] wlan0 wl_iw_iscan_get_scan buflen_from_user 8192:
  1210.  
  1211. <4>[ 17.090868] wlan0: SIOCGIWSCAN GET broadcast results
  1212.  
  1213. <4>[ 17.090903] wl_iw_run_ss_cache_timer : timer stops
  1214.  
  1215. <4>[ 17.090918] wl_iw_run_ss_cache_timer : timer starts
  1216.  
  1217. <4>[ 17.090932] wl_iw_iscan_get_scan return to WE 412 bytes APs=2
  1218.  
  1219. <4>[ 17.092183] wlan0: SIOCSIWPRIV request CSCAN S, info->cmd:8b0c, info->flags:0
  1220.  
  1221. <4>[ 17.092195] dwrq->length:20
  1222.  
  1223. <4>[ 17.092230] Unknown PRIVATE command CSCAN S
  1224.  
  1225. <4>[ 17.092240] Unknown PRIVATE command, ignored
  1226.  
  1227. <4>[ 17.092418] wlan0: SIOCSIWPRIV request MACADDR, info->cmd:8b0c, info->flags:0
  1228.  
  1229. <4>[ 17.092428] dwrq->length:4096
  1230.  
  1231. <4>[ 17.117905] wlan0: SIOCSIWPRIV request RSSI, info->cmd:8b0c, info->flags:0
  1232.  
  1233. <4>[ 17.117918] dwrq->length:4096
  1234.  
  1235. <4>[ 17.119148] wlan0: SIOCSIWPRIV request LINKSPEED, info->cmd:8b0c, info->flags:0
  1236.  
  1237. <4>[ 17.119160] dwrq->length:4096
  1238.  
  1239. <4>[ 17.120378] wlan0: SIOCSIWPRIV request RXFILTER-ADD 0, info->cmd:8b0c, info->flags:0
  1240.  
  1241. <4>[ 17.120392] dwrq->length:4096
  1242.  
  1243. <4>[ 17.120422] Unknown PRIVATE command RXFILTER-ADD 0
  1244.  
  1245. <4>[ 17.120433] Unknown PRIVATE command, ignored
  1246.  
  1247. <4>[ 17.120655] wlan0: SIOCSIWPRIV request RXFILTER-ADD 1, info->cmd:8b0c, info->flags:0
  1248.  
  1249. <4>[ 17.120665] dwrq->length:4096
  1250.  
  1251. <4>[ 17.120685] Unknown PRIVATE command RXFILTER-ADD 1
  1252.  
  1253. <4>[ 17.120697] Unknown PRIVATE command, ignored
  1254.  
  1255. <4>[ 17.120883] wlan0: SIOCSIWPRIV request RXFILTER-ADD 3, info->cmd:8b0c, info->flags:0
  1256.  
  1257. <4>[ 17.120893] dwrq->length:4096
  1258.  
  1259. <4>[ 17.120912] Unknown PRIVATE command RXFILTER-ADD 3
  1260.  
  1261. <4>[ 17.120923] Unknown PRIVATE command, ignored
  1262.  
  1263. <4>[ 17.121100] wlan0: SIOCSIWPRIV request RXFILTER-START, info->cmd:8b0c, info->flags:0
  1264.  
  1265. <4>[ 17.121110] dwrq->length:4096
  1266.  
  1267. <4>[ 17.121127] Unknown PRIVATE command RXFILTER-START
  1268.  
  1269. <4>[ 17.121138] Unknown PRIVATE command, ignored
  1270.  
  1271. <4>[ 17.122518] wlan0: SIOCSIWPRIV request BTCOEXSCAN-STOP, info->cmd:8b0c, info->flags:0
  1272.  
  1273. <4>[ 17.122530] dwrq->length:4096
  1274.  
  1275. <4>[ 17.122558] Unknown PRIVATE command BTCOEXSCAN-STOP
  1276.  
  1277. <4>[ 17.122570] Unknown PRIVATE command, ignored
  1278.  
  1279. <4>[ 17.123022] wlan0: SIOCSIWPRIV request COUNTRY US, info->cmd:8b0c, info->flags:0
  1280.  
  1281. <4>[ 17.123032] dwrq->length:4096
  1282.  
  1283. <4>[ 17.124898] wl_iw_set_country: set country US OK
  1284.  
  1285. <4>[ 19.915337] [RED LED] red_led_set() onoff:255
  1286.  
  1287. <6>[ 19.916904] red_led_set, red_led_status : 1
  1288.  
  1289. <4>[ 19.916922] [GREEN LED] green_led_set() onoff:255
  1290.  
  1291. <6>[ 19.917087] battery_capacity_read, battery capacity : 71
  1292.  
  1293. <6>[ 19.917172] battery_status_read, battery status : Charging
  1294.  
  1295. <6>[ 19.917189] green_led_set, status : Charging
  1296.  
  1297. <4>[ 19.917197] green_led_set, battery capacity : 71
  1298.  
  1299. <6>[ 19.917207] green_led_set(), red led on blinking green
  1300.  
  1301. <6>[ 19.917217] green_led_set(), send 3
  1302.  
  1303. <4>[ 23.347730] wlan0: SIOCSIWPRIV request COUNTRY US, info->cmd:8b0c, info->flags:0
  1304.  
  1305. <4>[ 23.347744] dwrq->length:4096
  1306.  
  1307. <4>[ 23.356292] wl_iw_set_country: set country US OK
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!