API tools faq
paste
rsuinux

my first install & boot on openwrt in cubiboard

rsuinux
Apr 13th, 2014
235
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 29.39 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2014.01-rc1 (Mar 26 2014 - 04:38:05)
  2. Board: Cubieboard
  3. DRAM: 1024 MiB
  4. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  5. spl: not an uImage at 1600
  6.  
  7.  
  8. U-Boot 2014.01-rc1 (Mar 26 2014 - 04:38:05) Allwinner Technology
  9.  
  10. CPU:   Allwinner A10 (SUN4I)
  11. Board: Cubieboard
  12. I2C:   ready
  13. DRAM:  1 GiB
  14. MMC:   SUNXI SD/MMC: 0
  15. *** Warning - bad CRC, using default environment
  16.  
  17. In:    serial
  18. Out:   serial
  19. Err:   serial
  20. Net:   emac
  21. Hit any key to stop autoboot:  3  2  1  0
  22. reading uEnv.txt
  23. 258 bytes read in 3 ms (84 KiB/s)
  24. Loaded environment from uEnv.txt
  25. Running uenvcmd ...
  26. reading uImage
  27. 2520728 bytes read in 116 ms (20.7 MiB/s)
  28. reading dtb
  29. 16348 bytes read in 5 ms (3.1 MiB/s)
  30. ## Booting kernel from Legacy Image at 46000000 ...
  31.    Image Name:   ARM OpenWrt Linux-3.13.2
  32.    Created:      2014-03-26  12:25:59 UTC
  33.    Image Type:   ARM Linux Kernel Image (uncompressed)
  34.    Data Size:    2520664 Bytes = 2.4 MiB
  35.    Load Address: 40008000
  36.    Entry Point:  40008000
  37.    Verifying Checksum ... OK
  38. ## Flattened Device Tree blob at 49000000
  39.    Booting using the fdt blob at 0x49000000
  40.    Loading Kernel Image ... OK
  41.    Using Device Tree in place at 49000000, end 49006fdb
  42.  
  43. Starting kernel ...
  44.  
  45. [    0.000000] Booting Linux on physical CPU 0x0
  46. [    0.000000] Linux version 3.13.2 (openwrt@gb-13) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40018) ) #1 SMP PREEMPT Wed Mar 26 12:25:50 UTC 2014
  47. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  48. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  49. [    0.000000] Machine model: Cubietech Cubieboard
  50. [    0.000000] Memory policy: Data cache writeback
  51. [    0.000000] CPU: All CPU(s) started in SVC mode.
  52. [    0.000000] PERCPU: Embedded 7 pages/cpu @c0d7b000 s7040 r8192 d13440 u32768
  53. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
  54. [    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
  55. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  56. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  57. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  58. [    0.000000] Memory: 1033932K/1048576K available (3567K kernel code, 158K rwdata, 1004K rodata, 186K init, 606K bss, 14644K reserved, 270336K highmem)
  59. [    0.000000] Virtual kernel memory layout:
  60. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  61. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  62. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  63. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  64. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  65. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  66. [    0.000000]       .text : 0xc0008000 - 0xc047ef04   (4572 kB)
  67. [    0.000000]       .init : 0xc047f000 - 0xc04adb80   ( 187 kB)
  68. [    0.000000]       .data : 0xc04ae000 - 0xc04d5a7c   ( 159 kB)
  69. [    0.000000]        .bss : 0xc04d5a7c - 0xc056d5a8   ( 607 kB)
  70. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  71. [    0.000000] Preemptible hierarchical RCU implementation.
  72. [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  73. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  74. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  75. [    0.000000] Console: colour dummy device 80x30
  76. [    0.000203] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  77. [    0.040055] pid_max: default: 32768 minimum: 301
  78. [    0.040174] Mount-cache hash table entries: 512
  79. [    0.044001] CPU: Testing write buffer coherency: ok
  80. [    0.044275] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  81. [    0.044323] Setting up static identity map for 0x40011940 - 0x40011974
  82. [    0.080204] Brought up 1 CPUs
  83. [    0.080216] SMP: Total of 1 processors activated.
  84. [    0.080227] CPU: All CPU(s) started in SVC mode.
  85. [    0.080917] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  86. [    0.081092] pinctrl core: initialized pinctrl subsystem
  87. [    0.081378] regulator-dummy: no parameters
  88. [    0.081624] NET: Registered protocol family 16
  89. [    0.082053] DMA: preallocated 256 KiB pool for atomic coherent allocations
  90. [    0.088033] bio: create slab <bio-0> at 0
  91. [    0.088479] reg-fixed-voltage ahci-5v.1: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
  92. [    0.088503] platform ahci-5v.1: Driver reg-fixed-voltage requests probe deferral
  93. [    0.088531] reg-fixed-voltage usb1-vbus.2: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  94. [    0.088546] platform usb1-vbus.2: Driver reg-fixed-voltage requests probe deferral
  95. [    0.088567] reg-fixed-voltage usb2-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  96. [    0.088581] platform usb2-vbus.3: Driver reg-fixed-voltage requests probe deferral
  97. [    0.088954] SCSI subsystem initialized
  98. [    0.089323] usbcore: registered new interface driver usbfs
  99. [    0.089370] usbcore: registered new interface driver hub
  100. [    0.089475] usbcore: registered new device driver usb
  101. [    0.089589] pps_core: LinuxPPS API ver. 1 registered
  102. [    0.089597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  103. [    0.089622] PTP clock support registered
  104. [    0.090349] Switched to clocksource timer
  105. [    0.095218] NET: Registered protocol family 2
  106. [    0.095866] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  107. [    0.095945] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  108. [    0.096056] TCP: Hash tables configured (established 8192 bind 8192)
  109. [    0.096142] TCP: reno registered
  110. [    0.096155] UDP hash table entries: 512 (order: 2, 16384 bytes)
  111. [    0.096186] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  112. [    0.096399] NET: Registered protocol family 1
  113. [    0.097334] audit: initializing netlink socket (disabled)
  114. [    0.097376] type=2000 audit(0.090:1): initialized
  115. [    0.098023] bounce pool size: 64 pages
  116. [    0.103652] VFS: Disk quotas dquot_6.5.2
  117. [    0.103847] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  118. [    0.105206] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  119. [    0.105218] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  120. [    0.105690] msgmni has been set to 1491
  121. [    0.106487] io scheduler noop registered
  122. [    0.106500] io scheduler deadline registered
  123. [    0.106529] io scheduler cfq registered (default)
  124. [    0.106750] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  125. [    0.108724] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  126. [    0.139160] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  127. [    0.161846] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 26, base_baud = 1500000) is a U6_16550A
  128. [    0.667733] console [ttyS0] enabled
  129. [    0.671798] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
  130. [    0.679556] 1c0b080.mdio supply phy not found, using dummy regulator
  131. [    0.686081] libphy: sun4i_mii_bus: probed
  132. [    0.721044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  133. [    0.727569] ehci-platform: EHCI generic platform driver
  134. [    0.732943] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  135. [    0.740202] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  136. [    0.747589] usbcore: registered new interface driver usb-storage
  137. [    0.753816] mousedev: PS/2 mouse device common for all mice
  138. [    0.760576] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  139. [    0.769158] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
  140. [    0.774334] sunxi-mmc 1c0f000.mmc: base:0xf00e6000 irq:18
  141. [    0.780593] TCP: cubic registered
  142. [    0.783910] Initializing XFRM netlink socket
  143. [    0.788197] NET: Registered protocol family 17
  144. [    0.792804] Bridge firewalling registered
  145. [    0.796820] 8021q: 802.1Q VLAN Support v1.8
  146. [    0.801152] Registering SWP/SWPB emulation handler
  147. [    0.806212] registered taskstats version 1
  148. [    0.810945] ahci-5v: 5000 mV
  149. [    0.814220] usb1-vbus: 5000 mV
  150. [    0.817628] usb2-vbus: 5000 mV
  151. [    0.890361] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
  152. [    0.897843] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
  153. [    0.903742] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  154. [    0.912714] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
  155. [    0.921475] scsi0 : ahci_platform
  156. [    0.925055] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 21
  157. [    0.934266] ehci-platform 1c14000.usb: EHCI Host Controller
  158. [    0.941014] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  159. [    0.948868] ehci-platform 1c14000.usb: irq 19, io mem 0x01c14000
  160. [    0.970356] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  161. [    0.976634] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  162. [    0.983445] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  163. [    0.990676] usb usb1: Product: EHCI Host Controller
  164. [    0.995552] usb usb1: Manufacturer: Linux 3.13.2 ehci_hcd
  165. [    1.001982] usb usb1: SerialNumber: 1c14000.usb
  166. [    1.006944] hub 1-0:1.0: USB hub found
  167. [    1.010777] hub 1-0:1.0: 1 port detected
  168. [    1.015127] ehci-platform 1c1c000.usb: EHCI Host Controller
  169. [    1.020771] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  170. [    1.028646] ehci-platform 1c1c000.usb: irq 22, io mem 0x01c1c000
  171. [    1.050394] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  172. [    1.056633] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  173. [    1.063438] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  174. [    1.070667] usb usb2: Product: EHCI Host Controller
  175. [    1.075541] usb usb2: Manufacturer: Linux 3.13.2 ehci_hcd
  176. [    1.080948] usb usb2: SerialNumber: 1c1c000.usb
  177. [    1.085824] hub 2-0:1.0: USB hub found
  178. [    1.089606] hub 2-0:1.0: 1 port detected
  179. [    1.094842] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  180. [    1.177808] mmc0: host does not support reading read-only switch. assuming write-enable.
  181. [    1.290364] ata1: SATA link down (SStatus 0 SControl 300)
  182. [    1.310443] Waiting for root device /dev/mmcblk0p2...
  183. [    1.350359] mmc0: new high speed SDHC card at address 1234
  184. [    1.356150] isa bounce pool size: 16 pages
  185. [    1.360398] mmcblk0: mmc0:1234 SA08G 7.28 GiB
  186. [    1.366525]  mmcblk0: p1 p2
  187. [    1.422030] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  188. [    1.431522] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  189. [    1.457605] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  190. [    1.465319] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  191. [    1.472353] Freeing unused kernel memory: 184K (c047f000 - c04ad000)
  192. procd: Console is alive
  193. procd: - watchdog -
  194. procd: - preinit -
  195. probing /dev/mmcblk0 for uboot env data
  196. Detected generic sunxi // generic sunxi
  197. [    1.769570] random: mktemp urandom read with 17 bits of entropy available
  198. Press the [f] key and hit [enter] to enter failsafe mode
  199. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  200. mount_root: mounting /dev/root
  201. [    4.852734] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  202. procd: - early -
  203. procd: - watchdog -
  204. procd: - ubus -
  205. procd: - init -
  206. Please press Enter to activate this console.
  207. procd: - init complete -
  208.  
  209.  
  210.  
  211. BusyBox v1.19.4 (2014-01-31 09:48:20 UTC) built-in shell (ash)
  212. Enter 'help' for a list of built-in commands.
  213.  
  214.  _______                     ________        __
  215. |       |.-----.-----.-----.|  |  |  |.----.|  |_
  216. |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  217. |_______||   __|_____|__|__||________||__|  |____|
  218.          |__| W I R E L E S S   F R E E D O M
  219. -----------------------------------------------------
  220. BARRIER BREAKER (Bleeding Edge, r39430)
  221. -----------------------------------------------------
  222.  * 1/2 oz Galliano         Pour all ingredients into
  223.  * 4 oz cold Coffee        an irish coffee mug filled
  224.  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  225.  * 2 tsp. Creme de Cacao
  226. -----------------------------------------------------
  227. root@OpenWrt:/# reboot
  228. procd: - shutdown -
  229. root@OpenWrt:/# [   78.396077] random: nonblocking pool is initialized
  230. [   78.675029] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  231. procd: - reboot -
  232. [   78.686719] reboot: Restarting system
  233.  
  234. U-Boot SPL 2014.01-rc1 (Mar 26 2014 - 04:38:05)
  235. Board: Cubieboard
  236. DRAM: 1024 MiB
  237. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  238. spl: not an uImage at 1600
  239.  
  240.  
  241. U-Boot 2014.01-rc1 (Mar 26 2014 - 04:38:05) Allwinner Technology
  242.  
  243. CPU:   Allwinner A10 (SUN4I)
  244. Board: Cubieboard
  245. I2C:   ready
  246. DRAM:  1 GiB
  247. MMC:   SUNXI SD/MMC: 0
  248. *** Warning - bad CRC, using default environment
  249.  
  250. In:    serial
  251. Out:   serial
  252. Err:   serial
  253. Net:   emac
  254. Hit any key to stop autoboot:  3  2  1  0
  255. reading uEnv.txt
  256. 258 bytes read in 3 ms (84 KiB/s)
  257. Loaded environment from uEnv.txt
  258. Running uenvcmd ...
  259. reading uImage
  260. 2520728 bytes read in 116 ms (20.7 MiB/s)
  261. reading dtb
  262. 16348 bytes read in 5 ms (3.1 MiB/s)
  263. ## Booting kernel from Legacy Image at 46000000 ...
  264.   Image Name:   ARM OpenWrt Linux-3.13.2
  265.   Created:      2014-03-26  12:25:59 UTC
  266.   Image Type:   ARM Linux Kernel Image (uncompressed)
  267.   Data Size:    2520664 Bytes = 2.4 MiB
  268.   Load Address: 40008000
  269.   Entry Point:  40008000
  270.   Verifying Checksum ... OK
  271. ## Flattened Device Tree blob at 49000000
  272.   Booting using the fdt blob at 0x49000000
  273.   Loading Kernel Image ... OK
  274.   Using Device Tree in place at 49000000, end 49006fdb
  275.  
  276. Starting kernel ...
  277.  
  278. [    0.000000] Booting Linux on physical CPU 0x0
  279. [    0.000000] Linux version 3.13.2 (openwrt@gb-13) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40018) ) #1 SMP PREEMPT Wed Mar 26 12:25:50 UTC 2014
  280. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  281. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  282. [    0.000000] Machine model: Cubietech Cubieboard
  283. [    0.000000] Memory policy: Data cache writeback
  284. [    0.000000] CPU: All CPU(s) started in SVC mode.
  285. [    0.000000] PERCPU: Embedded 7 pages/cpu @c0d7b000 s7040 r8192 d13440 u32768
  286. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
  287. [    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
  288. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  289. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  290. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  291. [    0.000000] Memory: 1033932K/1048576K available (3567K kernel code, 158K rwdata, 1004K rodata, 186K init, 606K bss, 14644K reserved, 270336K highmem)
  292. [    0.000000] Virtual kernel memory layout:
  293. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  294. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  295. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  296. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  297. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  298. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  299. [    0.000000]       .text : 0xc0008000 - 0xc047ef04   (4572 kB)
  300. [    0.000000]       .init : 0xc047f000 - 0xc04adb80   ( 187 kB)
  301. [    0.000000]       .data : 0xc04ae000 - 0xc04d5a7c   ( 159 kB)
  302. [    0.000000]        .bss : 0xc04d5a7c - 0xc056d5a8   ( 607 kB)
  303. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  304. [    0.000000] Preemptible hierarchical RCU implementation.
  305. [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  306. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  307. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  308. [    0.000000] Console: colour dummy device 80x30
  309. [    0.000200] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  310. [    0.040055] pid_max: default: 32768 minimum: 301
  311. [    0.040175] Mount-cache hash table entries: 512
  312. [    0.044000] CPU: Testing write buffer coherency: ok
  313. [    0.044274] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  314. [    0.044322] Setting up static identity map for 0x40011940 - 0x40011974
  315. [    0.080202] Brought up 1 CPUs
  316. [    0.080217] SMP: Total of 1 processors activated.
  317. [    0.080225] CPU: All CPU(s) started in SVC mode.
  318. [    0.080914] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  319. [    0.081084] pinctrl core: initialized pinctrl subsystem
  320. [    0.081368] regulator-dummy: no parameters
  321. [    0.081616] NET: Registered protocol family 16
  322. [    0.082049] DMA: preallocated 256 KiB pool for atomic coherent allocations
  323. [    0.088013] bio: create slab <bio-0> at 0
  324. [    0.088462] reg-fixed-voltage ahci-5v.1: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
  325. [    0.088486] platform ahci-5v.1: Driver reg-fixed-voltage requests probe deferral
  326. [    0.088513] reg-fixed-voltage usb1-vbus.2: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  327. [    0.088529] platform usb1-vbus.2: Driver reg-fixed-voltage requests probe deferral
  328. [    0.088551] reg-fixed-voltage usb2-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  329. [    0.088565] platform usb2-vbus.3: Driver reg-fixed-voltage requests probe deferral
  330. [    0.088937] SCSI subsystem initialized
  331. [    0.089308] usbcore: registered new interface driver usbfs
  332. [    0.089358] usbcore: registered new interface driver hub
  333. [    0.089461] usbcore: registered new device driver usb
  334. [    0.089574] pps_core: LinuxPPS API ver. 1 registered
  335. [    0.089582] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  336. [    0.089607] PTP clock support registered
  337. [    0.090326] Switched to clocksource timer
  338. [    0.095188] NET: Registered protocol family 2
  339. [    0.095833] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  340. [    0.095912] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  341. [    0.096022] TCP: Hash tables configured (established 8192 bind 8192)
  342. [    0.096106] TCP: reno registered
  343. [    0.096121] UDP hash table entries: 512 (order: 2, 16384 bytes)
  344. [    0.096152] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  345. [    0.096366] NET: Registered protocol family 1
  346. [    0.097293] audit: initializing netlink socket (disabled)
  347. [    0.097338] type=2000 audit(0.090:1): initialized
  348. [    0.097991] bounce pool size: 64 pages
  349. [    0.103611] VFS: Disk quotas dquot_6.5.2
  350. [    0.103808] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  351. [    0.105164] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  352. [    0.105175] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  353. [    0.105645] msgmni has been set to 1491
  354. [    0.106453] io scheduler noop registered
  355. [    0.106466] io scheduler deadline registered
  356. [    0.106495] io scheduler cfq registered (default)
  357. [    0.106718] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  358. [    0.108680] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  359. [    0.139078] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  360. [    0.161763] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 26, base_baud = 1500000) is a U6_16550A
  361. [    0.667657] console [ttyS0] enabled
  362. [    0.671721] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
  363. [    0.679491] 1c0b080.mdio supply phy not found, using dummy regulator
  364. [    0.686020] libphy: sun4i_mii_bus: probed
  365. [    0.721023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  366. [    0.727548] ehci-platform: EHCI generic platform driver
  367. [    0.732921] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  368. [    0.740182] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  369. [    0.747566] usbcore: registered new interface driver usb-storage
  370. [    0.753789] mousedev: PS/2 mouse device common for all mice
  371. [    0.760557] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  372. [    0.769134] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
  373. [    0.774304] sunxi-mmc 1c0f000.mmc: base:0xf00e6000 irq:18
  374. [    0.780564] TCP: cubic registered
  375. [    0.783884] Initializing XFRM netlink socket
  376. [    0.788171] NET: Registered protocol family 17
  377. [    0.792779] Bridge firewalling registered
  378. [    0.796797] 8021q: 802.1Q VLAN Support v1.8
  379. [    0.801131] Registering SWP/SWPB emulation handler
  380. [    0.806189] registered taskstats version 1
  381. [    0.810910] ahci-5v: 5000 mV
  382. [    0.814189] usb1-vbus: 5000 mV
  383. [    0.817603] usb2-vbus: 5000 mV
  384. [    0.890337] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
  385. [    0.897823] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
  386. [    0.903723] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  387. [    0.912697] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
  388. [    0.921466] scsi0 : ahci_platform
  389. [    0.925043] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 21
  390. [    0.934258] ehci-platform 1c14000.usb: EHCI Host Controller
  391. [    0.941009] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  392. [    0.948860] ehci-platform 1c14000.usb: irq 19, io mem 0x01c14000
  393. [    0.970335] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  394. [    0.976613] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  395. [    0.983425] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  396. [    0.990654] usb usb1: Product: EHCI Host Controller
  397. [    0.995528] usb usb1: Manufacturer: Linux 3.13.2 ehci_hcd
  398. [    1.001960] usb usb1: SerialNumber: 1c14000.usb
  399. [    1.006920] hub 1-0:1.0: USB hub found
  400. [    1.010754] hub 1-0:1.0: 1 port detected
  401. [    1.015104] ehci-platform 1c1c000.usb: EHCI Host Controller
  402. [    1.020748] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  403. [    1.028618] ehci-platform 1c1c000.usb: irq 22, io mem 0x01c1c000
  404. [    1.050372] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  405. [    1.056613] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  406. [    1.063419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  407. [    1.070648] usb usb2: Product: EHCI Host Controller
  408. [    1.075522] usb usb2: Manufacturer: Linux 3.13.2 ehci_hcd
  409. [    1.080929] usb usb2: SerialNumber: 1c1c000.usb
  410. [    1.085804] hub 2-0:1.0: USB hub found
  411. [    1.089584] hub 2-0:1.0: 1 port detected
  412. [    1.094818] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  413. [    1.177791] mmc0: host does not support reading read-only switch. assuming write-enable.
  414. [    1.290346] ata1: SATA link down (SStatus 0 SControl 300)
  415. [    1.310425] Waiting for root device /dev/mmcblk0p2...
  416. [    1.350338] mmc0: new high speed SDHC card at address 1234
  417. [    1.356131] isa bounce pool size: 16 pages
  418. [    1.360379] mmcblk0: mmc0:1234 SA08G 7.28 GiB
  419. [    1.366503]  mmcblk0: p1 p2
  420. [    1.422009] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  421. [    1.431507] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  422. [    1.458254] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  423. [    1.465961] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  424. [    1.472993] Freeing unused kernel memory: 184K (c047f000 - c04ad000)
  425. procd: Console is alive
  426. procd: - watchdog -
  427. procd: - preinit -
  428. probing /dev/mmcblk0 for uboot env data
  429. Detected generic sunxi // generic sunxi
  430. [    1.768536] random: mktemp urandom read with 17 bits of entropy available
  431. Press the [f] key and hit [enter] to enter failsafe mode
  432. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  433. 2
  434. mount_root: mounting /dev/root
  435. [    3.332888] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  436. procd: - early -
  437. procd: watchdog_init(103): Watchdog handover: fd=3
  438. procd: - watchdog -
  439. procd: - ubus -
  440. procd: - init -
  441. procd: service_handle_set(236): Create service ubus
  442. procd: service_instance_update(65): Create instance ubus::instance1
  443. procd: instance_start(174): Started instance ubus::instance1
  444. procd: _rc(132): running /etc/init.d/ubus running
  445. procd: _rc(135): glob failed on /etc/init.d/ubus
  446. procd: _rc(132): running /etc/rc.d/S* boot
  447. procd: q_initd_run(69): start /etc/rc.d/S00sysfixtime boot
  448. Please press Enter to activate this console.
  449. procd: ubus_connect_cb(57): Connected to ubus, id=7ec9545c
  450. procd: q_initd_complete(99): stop /etc/rc.d/S00sysfixtime boot
  451. procd: q_initd_run(69): start /etc/rc.d/S10boot boot
  452. procd: q_initd_complete(99): stop /etc/rc.d/S10boot boot
  453. procd: q_initd_run(69): start /etc/rc.d/S11sysctl boot
  454. procd: q_initd_complete(99): stop /etc/rc.d/S11sysctl boot
  455. procd: q_initd_run(69): start /etc/rc.d/S12log boot
  456. procd: service_handle_set(236): Create service log
  457. procd: service_instance_update(65): Create instance log::instance1
  458. procd: instance_start(174): Started instance log::instance1
  459. procd: _rc(132): running /etc/init.d/log running
  460. procd: q_initd_run(69): start /etc/init.d/log running
  461. procd: q_initd_complete(99): stop /etc/rc.d/S12log boot
  462. procd: q_initd_run(69): start /etc/rc.d/S19firewall boot
  463. procd: q_initd_complete(99): stop /etc/init.d/log running
  464. procd: q_initd_complete(99): stop /etc/rc.d/S19firewall boot
  465. procd: q_initd_run(69): start /etc/rc.d/S20network boot
  466. procd: service_handle_set(236): Create service network
  467. procd: service_instance_update(65): Create instance network::instance1
  468. procd: instance_start(174): Started instance network::instance1
  469. procd: _rc(132): running /etc/init.d/network running
  470. procd: q_initd_run(69): start /etc/init.d/network running
  471. procd: q_initd_complete(99): stop /etc/rc.d/S20network boot
  472. procd: q_initd_run(69): start /etc/rc.d/S35odhcpd boot
  473. procd: service_handle_set(236): Create service odhcpd
  474. procd: service_instance_update(65): Create instance odhcpd::instance1
  475. procd: instance_start(174): Started instance odhcpd::instance1
  476. procd: _rc(132): running /etc/init.d/odhcpd running
  477. procd: q_initd_run(69): start /etc/init.d/odhcpd running
  478. procd: q_initd_complete(99): stop /etc/rc.d/S35odhcpd boot
  479. procd: q_initd_run(69): start /etc/rc.d/S50cron boot
  480. procd: q_initd_complete(99): stop /etc/init.d/odhcpd running
  481. procd: service_handle_set(236): Create service cron
  482. procd: _rc(132): running /etc/init.d/cron running
  483. procd: q_initd_run(69): start /etc/init.d/cron running
  484. procd: q_initd_complete(99): stop /etc/rc.d/S50cron boot
  485. procd: q_initd_run(69): start /etc/rc.d/S50dropbear boot
  486. procd: q_initd_complete(99): stop /etc/init.d/cron running
  487. procd: service_handle_set(236): Create service dropbear
  488. procd: service_instance_update(65): Create instance dropbear::instance1
  489. procd: instance_start(174): Started instance dropbear::instance1
  490. procd: _rc(132): running /etc/init.d/dropbear running
  491. procd: q_initd_run(69): start /etc/init.d/dropbear running
  492. procd: q_initd_complete(99): stop /etc/rc.d/S50dropbear boot
  493. procd: q_initd_run(69): start /etc/rc.d/S50telnet boot
  494. procd: q_initd_complete(99): stop /etc/init.d/dropbear running
  495. procd: service_handle_set(236): Create service telnet
  496. procd: _rc(132): running /etc/init.d/telnet running
  497. procd: q_initd_run(69): start /etc/init.d/telnet running
  498. procd: q_initd_complete(99): stop /etc/rc.d/S50telnet boot
  499. procd: q_initd_run(69): start /etc/rc.d/S60dnsmasq boot
  500. procd: q_initd_complete(99): stop /etc/init.d/telnet running
  501. procd: q_initd_complete(99): stop /etc/rc.d/S60dnsmasq boot
  502. procd: q_initd_run(69): start /etc/rc.d/S95done boot
  503. procd: q_initd_complete(99): stop /etc/rc.d/S95done boot
  504. procd: q_initd_run(69): start /etc/rc.d/S96led boot
  505. procd: q_initd_complete(99): stop /etc/rc.d/S96led boot
  506. procd: q_initd_run(69): start /etc/rc.d/S98sysntpd boot
  507. procd: service_handle_set(236): Create service sysntpd
  508. procd: service_instance_update(65): Create instance sysntpd::instance1
  509. procd: instance_start(174): Started instance sysntpd::instance1
  510. procd: _rc(132): running /etc/init.d/sysntpd running
  511. procd: q_initd_run(69): start /etc/init.d/sysntpd running
  512. procd: q_initd_complete(99): stop /etc/rc.d/S98sysntpd boot
  513. procd: - init complete -
  514. procd: q_initd_complete(99): stop /etc/init.d/sysntpd running
  515. procd: service_handle_set(236): Create service dnsmasq
  516. procd: service_instance_update(65): Create instance dnsmasq::instance1
  517. procd: instance_start(174): Started instance dnsmasq::instance1
  518. procd: _rc(132): running /etc/init.d/dnsmasq running
  519. procd: q_initd_run(69): start /etc/init.d/dnsmasq running
  520. procd: q_initd_complete(99): stop /etc/init.d/dnsmasq running
  521. procd: q_initd_complete(99): stop /etc/init.d/network running
  522.  
  523.  
  524.  
  525. BusyBox v1.19.4 (2014-01-31 09:48:20 UTC) built-in shell (ash)
  526. Enter 'help' for a list of built-in commands.
  527.  
  528.   _______                     ________        __
  529.  |       |.-----.-----.-----.|  |  |  |.----.|  |_
  530.  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  531.  |_______||   __|_____|__|__||________||__|  |____|
  532.           |__| W I R E L E S S   F R E E D O M
  533.  -----------------------------------------------------
  534.  BARRIER BREAKER (Bleeding Edge, r39430)
  535.  -----------------------------------------------------
  536.   * 1/2 oz Galliano         Pour all ingredients into
  537.   * 4 oz cold Coffee        an irish coffee mug filled
  538.   * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  539.   * 2 tsp. Creme de Cacao
  540.  -----------------------------------------------------
  541. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!