Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- INFO: RCW BOOT SRC is QSPI
- INFO: RCW BOOT SRC is QSPI
- WARNING: Using I2C3 for DDR SPD
- INFO: platform clock 700000000
- INFO: DDR PLL 2100000000
- INFO: time base 11 ms
- INFO: Parse DIMM SPD(s)
- INFO: Controller 0
- INFO: DIMM 0
- INFO: addr 0x51
- WARNING: Using I2C3 for DDR SPD
- WARNING: Using I2C3 for DDR SPD
- WARNING: Using I2C3 for DDR SPD
- WARNING: Using I2C3 for DDR SPD
- INFO: checksum 0xa73c86cb
- INFO: n_ranks 2
- INFO: rank_density 0x400000000
- INFO: capacity 0x800000000
- INFO: die density 0x6
- INFO: primary_sdram_width 64
- INFO: ec_sdram_width 8
- INFO: device_width 8
- INFO: package_3ds 0
- INFO: rc 0x26 (Raw card G1)
- INFO: rdimm 0
- INFO: mirrored_dimm 1
- INFO: n_row_addr 17
- INFO: n_col_addr 10
- INFO: bank_addr_bits 0
- INFO: bank_group_bits 2
- INFO: edc_config 2
- INFO: burst_lengths_bitmask 0xc
- INFO: tckmin_x_ps 682
- INFO: tckmax_ps 1600
- INFO: caslat_x 0x6fffc00
- INFO: taa_ps 13750
- INFO: trcd_ps 13750
- INFO: trp_ps 13750
- INFO: tras_ps 32000
- INFO: trc_ps 45750
- INFO: trfc1_ps 350000
- INFO: trfc2_ps 260000
- INFO: trfc4_ps 160000
- INFO: tfaw_ps 21000
- INFO: trrds_ps 2700
- INFO: trrdl_ps 4900
- INFO: tccdl_ps 5000
- INFO: trfc_slr_ps 0
- INFO: twr_ps 15000
- INFO: refresh_rate_ps 7800000
- INFO: dq_mapping 0xb
- INFO: dq_mapping 0x2b
- INFO: dq_mapping 0xc
- INFO: dq_mapping 0x2b
- INFO: dq_mapping 0x2b
- INFO: dq_mapping 0xb
- INFO: dq_mapping 0x16
- INFO: dq_mapping 0x36
- INFO: dq_mapping 0xc
- INFO: dq_mapping 0x2b
- INFO: dq_mapping 0x15
- INFO: dq_mapping 0x2c
- INFO: dq_mapping 0xb
- INFO: dq_mapping 0x35
- INFO: dq_mapping 0x16
- INFO: dq_mapping 0x36
- INFO: dq_mapping 0x16
- INFO: dq_mapping 0x36
- INFO: dq_mapping_ors 1
- INFO: DIMM 1
- INFO: done with controller 0
- INFO: cal cs
- INFO: cs_in_use = 3
- INFO: cs_on_dimm[0] = 3
- NOTICE: UDIMM 9965657-029.A00G
- INFO: Time after parsing SPD 562 ms
- INFO: Synthesize configurations
- INFO: cs 0
- INFO: odt_rd_cfg 0x0
- INFO: odt_wr_cfg 0x5
- INFO: odt_rtt_norm 0x3
- INFO: odt_rtt_wr 0x0
- INFO: auto_precharge 0
- INFO: cs 1
- INFO: odt_rd_cfg 0x0
- INFO: odt_wr_cfg 0x0
- INFO: odt_rtt_norm 0x0
- INFO: odt_rtt_wr 0x0
- INFO: auto_precharge 0
- INFO: cs 2
- INFO: odt_rd_cfg 0x0
- INFO: odt_wr_cfg 0x0
- INFO: odt_rtt_norm 0x0
- INFO: odt_rtt_wr 0x0
- INFO: auto_precharge 0
- INFO: cs 3
- INFO: odt_rd_cfg 0x0
- INFO: odt_wr_cfg 0x0
- INFO: odt_rtt_norm 0x0
- INFO: odt_rtt_wr 0x0
- INFO: auto_precharge 0
- INFO: ctlr_init_ecc 1
- INFO: x4_en 0
- INFO: ap_en 0
- INFO: ctlr_intlv 0
- INFO: ctlr_intlv_mode 0
- INFO: ba_intlv 0x40
- INFO: data_bus_used 0
- INFO: otf_burst_chop_en 1
- INFO: burst_length 0x6
- INFO: dbw_cap_shift 0
- INFO: Assign binding addresses
- INFO: ctlr_intlv 0
- INFO: rank density 0x400000000
- INFO: CS 0
- INFO: base_addr 0x0
- INFO: size 0x800000000
- INFO: CS 1
- INFO: base_addr 0x0
- INFO: size 0x800000000
- INFO: base 0x0
- INFO: Total mem by assignment is 0x800000000
- INFO: Calculate controller registers
- INFO: Skip CL mask for this speed 0x4000
- INFO: Skip caslat 0x4000
- INFO: cs_in_use = 0x3
- INFO: cs0
- INFO: _config = 0x80050522
- INFO: cs[0].bnds = 0x7ff
- INFO: cs_in_use = 0x3
- INFO: cs1
- INFO: _config = 0x80000522
- INFO: cs[1].bnds = 0x7ff
- INFO: sdram_cfg[0] = 0xe5004000
- INFO: sdram_cfg[1] = 0x401151
- INFO: sdram_cfg[2] = 0x0
- INFO: timing_cfg[0] = 0xd1770018
- INFO: timing_cfg[1] = 0xf2fc8245
- INFO: timing_cfg[2] = 0x594197
- INFO: timing_cfg[3] = 0x2161100
- INFO: timing_cfg[4] = 0x220002
- INFO: timing_cfg[5] = 0x5401400
- INFO: timing_cfg[6] = 0x0
- INFO: timing_cfg[7] = 0x26600000
- INFO: timing_cfg[8] = 0x5446a00
- INFO: timing_cfg[9] = 0x0
- INFO: dq_map[0] = 0x2eb32bac
- INFO: dq_map[1] = 0x2d6d95b0
- INFO: dq_map[2] = 0x2f55b658
- INFO: dq_map[3] = 0xd8cac001
- INFO: sdram_mode[0] = 0x3010631
- INFO: sdram_mode[1] = 0x100200
- INFO: sdram_mode[9] = 0x8400000
- INFO: sdram_mode[8] = 0x500
- INFO: sdram_mode[2] = 0x10631
- INFO: sdram_mode[3] = 0x100200
- INFO: sdram_mode[10] = 0x400
- INFO: sdram_mode[11] = 0x8400000
- INFO: sdram_mode[4] = 0x10631
- INFO: sdram_mode[5] = 0x100200
- INFO: sdram_mode[12] = 0x400
- INFO: sdram_mode[13] = 0x8400000
- INFO: sdram_mode[6] = 0x10631
- INFO: sdram_mode[7] = 0x100200
- INFO: sdram_mode[14] = 0x400
- INFO: sdram_mode[15] = 0x8400000
- INFO: eor = 0x40000000
- INFO: interval = 0x1ffe07ff
- INFO: zq_cntl = 0x8a090705
- INFO: ddr_sr_cntr = 0x0
- INFO: clk_cntl = 0x2400000
- INFO: cdr[0] = 0x80080000
- INFO: cdr[1] = 0xc0
- INFO: wrlvl_cntl[0] = 0x8675f605
- INFO: wrlvl_cntl[1] = 0x704080b
- INFO: wrlvl_cntl[2] = 0xf0c0d0a
- INFO: debug[28] = 0x7b
- INFO: Time before programming controller 830 ms
- INFO: Program controller registers
- INFO: total size 32 GB
- INFO: Need to wait up to 8160 ms
- INFO: Reading debug[9] as 0x2e003200
- INFO: Reading debug[10] as 0x2a003300
- INFO: Reading debug[11] as 0x3a004200
- INFO: Reading debug[12] as 0x3d004100
- INFO: cpo_min 0x2a
- INFO: cpo_max 0x42
- INFO: debug[28] 0x6a007b
- WARNING: Warning: A009942 requires setting cpo_sample to 0x5d
- INFO: *0x1080000 = 0x7ff
- INFO: *0x1080008 = 0x7ff
- INFO: *0x1080080 = 0x80050522
- INFO: *0x1080084 = 0x80000522
- INFO: *0x1080100 = 0x2161100
- INFO: *0x1080104 = 0xd1770018
- INFO: *0x1080108 = 0xf2fc8245
- INFO: *0x108010c = 0x594197
- INFO: *0x1080110 = 0xe5004000
- INFO: *0x1080114 = 0x401141
- INFO: *0x1080118 = 0x3010631
- INFO: *0x108011c = 0x100200
- INFO: *0x1080120 = 0x1600086b
- INFO: *0x1080124 = 0x1ffe07ff
- INFO: *0x1080128 = 0xdeadbeef
- INFO: *0x1080130 = 0x2400000
- INFO: *0x1080160 = 0x220002
- INFO: *0x1080164 = 0x5401400
- INFO: *0x108016c = 0x26600000
- INFO: *0x1080170 = 0x8a090705
- INFO: *0x1080174 = 0xc675f605
- INFO: *0x1080190 = 0x704080b
- INFO: *0x1080194 = 0xf0c0d0a
- INFO: *0x1080200 = 0x10631
- INFO: *0x1080204 = 0x100200
- INFO: *0x1080208 = 0x10631
- INFO: *0x108020c = 0x100200
- INFO: *0x1080210 = 0x10631
- INFO: *0x1080214 = 0x100200
- INFO: *0x1080220 = 0x500
- INFO: *0x1080224 = 0x8400000
- INFO: *0x1080228 = 0x400
- INFO: *0x108022c = 0x8400000
- INFO: *0x1080230 = 0x400
- INFO: *0x1080234 = 0x8400000
- INFO: *0x1080238 = 0x400
- INFO: *0x108023c = 0x8400000
- INFO: *0x1080250 = 0x5446a00
- INFO: *0x1080270 = 0xffff
- INFO: *0x1080280 = 0xeedeeedd
- INFO: *0x1080284 = 0xedeedddd
- INFO: *0x1080288 = 0x11211122
- INFO: *0x108028c = 0x12112222
- INFO: *0x1080290 = 0x21de0001
- INFO: *0x1080400 = 0x2eb32bac
- INFO: *0x1080404 = 0x2d6d95b0
- INFO: *0x1080408 = 0x2f55b658
- INFO: *0x108040c = 0xd8cac001
- INFO: *0x1080b20 = 0x8080
- INFO: *0x1080b24 = 0x80000000
- INFO: *0x1080b28 = 0x80080000
- INFO: *0x1080b2c = 0xc0
- INFO: *0x1080bf8 = 0x20502
- INFO: *0x1080bfc = 0x100
- INFO: *0x1080c00 = 0x40000000
- INFO: *0x1080f04 = 0x2
- INFO: *0x1080f08 = 0x9
- INFO: *0x1080f0c = 0x14000c20
- INFO: *0x1080f24 = 0x2e003200
- INFO: *0x1080f28 = 0x2a003300
- INFO: *0x1080f2c = 0x3a004200
- INFO: *0x1080f30 = 0x3d004100
- INFO: *0x1080f34 = 0x36007000
- INFO: *0x1080f48 = 0x1
- INFO: *0x1080f4c = 0x94000000
- INFO: *0x1080f50 = 0xd001000
- INFO: *0x1080f54 = 0xb001400
- INFO: *0x1080f58 = 0x19002200
- INFO: *0x1080f5c = 0x1c001e00
- INFO: *0x1080f60 = 0x17000000
- INFO: *0x1080f64 = 0x9000
- INFO: *0x1080f68 = 0x20
- INFO: *0x1080f70 = 0x6a007b
- INFO: *0x1080f94 = 0x80000000
- INFO: *0x1080f9c = 0x29002800
- INFO: *0x1080fa0 = 0x28002900
- INFO: *0x1080fa4 = 0x28002700
- INFO: *0x1080fa8 = 0x2a002900
- INFO: *0x1080fac = 0x26000000
- INFO: *0x1080fb0 = 0x3
- INFO: *0x1080fb4 = 0x1e1d1c1d
- INFO: *0x1080fb8 = 0x1d1c1e1c
- INFO: *0x1080fbc = 0x1e1c1c1f
- INFO: *0x1080fc0 = 0x1d1d1c1c
- INFO: *0x1080fc4 = 0x1e1f1b20
- INFO: *0x1080fc8 = 0x1d1e1f1d
- INFO: *0x1080fcc = 0x1f1f1d1f
- INFO: *0x1080fd0 = 0x1d1e1e1d
- INFO: *0x1080fd4 = 0x1e1e1c1e
- INFO: *0x1080fd8 = 0x1d1d1e1d
- INFO: *0x1080fdc = 0x1f1c1b1d
- INFO: *0x1080fe0 = 0x1e1e1d1b
- INFO: *0x1080fe4 = 0x1e1f1c20
- INFO: *0x1080fe8 = 0x1f1f1d1e
- INFO: *0x1080fec = 0x1e1e1d1f
- INFO: *0x1080ff0 = 0x1e1f201e
- INFO: *0x1080ff4 = 0x1e1d1a1e
- INFO: *0x1080ff8 = 0x1b1e1d1b
- INFO: *0x1080ffc = 0x1f000000
- NOTICE: 32 GB DDR4, 64-bit, CL=15, ECC on, CS0+CS1
- INFO: Time used by DDR driver 4396 ms
- NOTICE: BL2: v1.5(debug):8bf4598
- NOTICE: BL2: Built : 03:58:00, Mar 15 2022
- INFO: Configuring TrustZone Controller
- INFO: Value of region base = ffe00000
- INFO: Value of region base = 1ffe00000
- INFO: Value of region base = fbe00000
- INFO: Value of region base = 8880000000
- INFO: BL2: Doing platform setup
- INFO: BL2: Loading image id 3
- INFO: Loading image id=3 at address 0xfbe00000
- INFO: Image id=3 loaded: 0xfbe00000 - 0xfbe0c16c
- INFO: BL2: Loading image id 5
- INFO: Loading image id=5 at address 0x82000000
- INFO: Image id=5 loaded: 0x82000000 - 0x8210b016
- Loading Linux 5.3.18-59.37-default ...
- Loading initial ramdisk ...
- EFI stub: Booting Linux Kernel...
- EFI stub: EFI_RNG_PROTOCOL unavailable, KASLR will be disabled
- EFI stub: ERROR: Could not determine UEFI Secure Boot status.
- EFI stub: Using DTB from configuration table
- EFI stub: Exiting boot services and installing virtual address map...
- fsl-mc: Deploying data path layout ... SUCCESS
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.3.18-59.37-default (geeko@buildhost) (gcc version 7.5.0 (SUSE Linux)) #1 SMP Mon Nov 22 12:29:04 UTC 2021 (d10168e)
- [ 0.000000] Machine model: Traverse Ten64
- [ 0.000000] efi: EFI v2.80 by Das U-Boot
- [ 0.000000] efi: RTPROP=0x87dfff4040 SMBIOS=0xf69c6000 MEMRESERVE=0x87dfe83040
- [ 0.000000] earlycon: ns16550a0 at MMIO 0x00000000021c0500 (options '115200n8')
- [ 0.000000] printk: bootconsole [ns16550a0] enabled
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000087dfffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x87dc0ca300-0x87dc0cdfff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal [mem 0x0000000100000000-0x00000087dfffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000f69c5fff]
- [ 0.000000] node 0: [mem 0x00000000f69c6000-0x00000000f69c6fff]
- [ 0.000000] node 0: [mem 0x00000000f69c7000-0x00000000fbcbffff]
- [ 0.000000] node 0: [mem 0x00000000fbcc0000-0x00000000fbccffff]
- [ 0.000000] node 0: [mem 0x00000000fbcd0000-0x00000000fbdfffff]
- [ 0.000000] node 0: [mem 0x0000008080000000-0x00000087dffe7fff]
- [ 0.000000] node 0: [mem 0x00000087dffe8000-0x00000087dffecfff]
- [ 0.000000] node 0: [mem 0x00000087dffed000-0x00000087dffeffff]
- [ 0.000000] node 0: [mem 0x00000087dfff0000-0x00000087dfff0fff]
- [ 0.000000] node 0: [mem 0x00000087dfff1000-0x00000087dfff3fff]
- [ 0.000000] node 0: [mem 0x00000087dfff4000-0x00000087dfffffff]
- [ 0.000000] Zeroed struct page in unavailable ranges: 35 pages
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000087dfffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] percpu: Embedded 32 pages/cpu s93592 r8192 d29288 u131072
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8111616
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-5.3.18-59.37-default root=UUID=3a588acc-c8c2-4e1d-94c1-9ee6ead0a190 plymouth.enable=0 rd.kiwi.oem.maxdisk=5000G earlycon
- [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0xf7cc0000-0xfbcc0000] (64MB)
- [ 0.000000] Memory: 2974608K/32962560K available (11456K kernel code, 2098K rwdata, 5552K rodata, 6464K init, 9645K bss, 779840K reserved, 0K cma-reserved)
- [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x50/0x5f8 with crng_init=0
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] ftrace: allocating 40206 entries in 158 pages
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=768 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006100000
- [ 0.000000] ITS [mem 0x06020000-0x0603ffff]
- [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @80bfd80000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x00000080bfe00000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000080bfe10000
- [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
- [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
- [ 0.008485] Console: colour dummy device 80x25
- [ 0.012954] printk: console [tty0] enabled
- [ 0.017072] printk: bootconsole [ns16550a0] disabled
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.3.18-59.37-default (geeko@buildhost) (gcc version 7.5.0 (SUSE Linux)) #1 SMP Mon Nov 22 12:29:04 UTC 2021 (d10168e)
- [ 0.000000] Machine model: Traverse Ten64
- [ 0.000000] efi: EFI v2.80 by Das U-Boot
- [ 0.000000] efi: RTPROP=0x87dfff4040 SMBIOS=0xf69c6000 MEMRESERVE=0x87dfe83040
- [ 0.000000] earlycon: ns16550a0 at MMIO 0x00000000021c0500 (options '115200n8')
- [ 0.000000] printk: bootconsole [ns16550a0] enabled
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000087dfffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x87dc0ca300-0x87dc0cdfff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal [mem 0x0000000100000000-0x00000087dfffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000f69c5fff]
- [ 0.000000] node 0: [mem 0x00000000f69c6000-0x00000000f69c6fff]
- [ 0.000000] node 0: [mem 0x00000000f69c7000-0x00000000fbcbffff]
- [ 0.000000] node 0: [mem 0x00000000fbcc0000-0x00000000fbccffff]
- [ 0.000000] node 0: [mem 0x00000000fbcd0000-0x00000000fbdfffff]
- [ 0.000000] node 0: [mem 0x0000008080000000-0x00000087dffe7fff]
- [ 0.000000] node 0: [mem 0x00000087dffe8000-0x00000087dffecfff]
- [ 0.000000] node 0: [mem 0x00000087dffed000-0x00000087dffeffff]
- [ 0.000000] node 0: [mem 0x00000087dfff0000-0x00000087dfff0fff]
- [ 0.000000] node 0: [mem 0x00000087dfff1000-0x00000087dfff3fff]
- [ 0.000000] node 0: [mem 0x00000087dfff4000-0x00000087dfffffff]
- [ 0.000000] Zeroed struct page in unavailable ranges: 35 pages
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000087dfffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] percpu: Embedded 32 pages/cpu s93592 r8192 d29288 u131072
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8111616
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-5.3.18-59.37-default root=UUID=3a588acc-c8c2-4e1d-94c1-9ee6ead0a190 plymouth.enable=0 rd.kiwi.oem.maxdisk=5000G earlycon
- [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0xf7cc0000-0xfbcc0000] (64MB)
- [ 0.000000] Memory: 2974608K/32962560K available (11456K kernel code, 2098K rwdata, 5552K rodata, 6464K init, 9645K bss, 779840K reserved, 0K cma-reserved)
- [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x50/0x5f8 with crng_init=0
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] ftrace: allocating 40206 entries in 158 pages
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=768 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006100000
- [ 0.000000] ITS [mem 0x06020000-0x0603ffff]
- [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @80bfd80000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x00000080bfe00000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000080bfe10000
- [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
- [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
- [ 0.008485] Console: colour dummy device 80x25
- [ 0.012954] printk: console [tty0] enabled
- [ 0.017072] printk: bootconsole [ns16550a0] disabled
- [ 0.022122] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
- [ 0.022134] pid_max: default: 32768 minimum: 301
- [ 0.022221] LSM: Security Framework initializing
- [ 0.022284] AppArmor: AppArmor initialized
- [ 0.022440] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.022517] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.023469] ASID allocator initialised with 32768 entries
- [ 0.023525] rcu: Hierarchical SRCU implementation.
- [ 0.024289] Platform MSI: gic-its@6020000 domain created
- [ 0.024359] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
- [ 0.024407] fsl-mc MSI: gic-its@6020000 domain created
- [ 0.025145] Remapping and enabling EFI services.
- [ 0.025433] smp: Bringing up secondary CPUs ...
- [ 0.025748] Detected VIPT I-cache on CPU1
- [ 0.025766] GICv3: CPU1: found redistributor 1 region 0:0x0000000006120000
- [ 0.025795] GICv3: CPU1: using allocated LPI pending table @0x00000080bfe20000
- [ 0.025820] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.026145] Detected VIPT I-cache on CPU2
- [ 0.026157] GICv3: CPU2: found redistributor 2 region 0:0x0000000006140000
- [ 0.026179] GICv3: CPU2: using allocated LPI pending table @0x00000080bfe30000
- [ 0.026193] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.026511] Detected VIPT I-cache on CPU3
- [ 0.026524] GICv3: CPU3: found redistributor 3 region 0:0x0000000006160000
- [ 0.026547] GICv3: CPU3: using allocated LPI pending table @0x00000080bfe40000
- [ 0.026563] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.026880] Detected VIPT I-cache on CPU4
- [ 0.026900] GICv3: CPU4: found redistributor 100 region 0:0x0000000006180000
- [ 0.026936] GICv3: CPU4: using allocated LPI pending table @0x00000080bfe50000
- [ 0.026959] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
- [ 0.027320] Detected VIPT I-cache on CPU5
- [ 0.027335] GICv3: CPU5: found redistributor 101 region 0:0x00000000061a0000
- [ 0.027360] GICv3: CPU5: using allocated LPI pending table @0x00000080bfe60000
- [ 0.027375] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
- [ 0.027706] Detected VIPT I-cache on CPU6
- [ 0.027721] GICv3: CPU6: found redistributor 102 region 0:0x00000000061c0000
- [ 0.027746] GICv3: CPU6: using allocated LPI pending table @0x00000080bfe70000
- [ 0.027760] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
- [ 0.028099] Detected VIPT I-cache on CPU7
- [ 0.028114] GICv3: CPU7: found redistributor 103 region 0:0x00000000061e0000
- [ 0.028138] GICv3: CPU7: using allocated LPI pending table @0x00000080bfe80000
- [ 0.028153] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
- [ 0.028216] smp: Brought up 1 node, 8 CPUs
- [ 0.028364] SMP: Total of 8 processors activated.
- [ 0.028372] CPU features: detected: 32-bit EL0 Support
- [ 0.028379] CPU features: detected: CRC32 instructions
- [ 0.029231] CPU: All CPU(s) started at EL2
- [ 0.029257] alternatives: patching kernel code
- [ 1.025793] node 0 initialised, 7302028 pages in 1000ms
- [ 1.026524] devtmpfs: initialized
- [ 1.030256] Registered cp15_barrier emulation handler
- [ 1.030270] Registered setend emulation handler
- [ 1.030281] KASLR enabled
- [ 1.030453] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 1.030470] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 1.030687] pinctrl core: initialized pinctrl subsystem
- [ 1.031322] SMBIOS 3.0 present.
- [ 1.031337] DMI: traverse ten64/ten64, BIOS 2020.07-rc1-ga94e0d21 03/15/2022
- [ 1.031689] NET: Registered protocol family 16
- [ 1.032575] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
- [ 1.033231] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 1.033886] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 1.033937] audit: initializing netlink subsys (disabled)
- [ 1.034050] audit: type=2000 audit(1.030:1): state=initialized audit_enabled=0 res=1
- [ 1.034713] cpuidle: using governor ladder
- [ 1.034789] cpuidle: using governor menu
- [ 1.034879] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 1.035566] Serial: AMBA PL011 UART driver
- [ 1.036564] Machine: Traverse Ten64
- [ 1.036570] SoC family: QorIQ LS1088A
- [ 1.036576] SoC ID: svr:0x87030010, Revision: 1.0
- [ 1.043621] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.20.4
- [ 1.046203] fsl_mc_dprc dprc.1: DMA mask not set
- [ 1.050681] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 1.050691] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 1.050699] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 1.050707] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 1.477569] alg: No test for lzo-rle (lzo-rle-generic)
- [ 1.477638] alg: No test for lzo-rle (lzo-rle-scomp)
- [ 1.486954] ACPI: Interpreter disabled.
- [ 1.487396] iommu: Default domain type: Passthrough
- [ 1.487544] vgaarb: loaded
- [ 1.487775] pps_core: LinuxPPS API ver. 1 registered
- [ 1.487783] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.487802] PTP clock support registered
- [ 1.487864] EDAC MC: Ver: 3.0.0
- [ 1.488113] ima: secureboot mode unknown, no efi
- [ 1.488582] NetLabel: Initializing
- [ 1.488589] NetLabel: domain hash size = 128
- [ 1.488594] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.488636] NetLabel: unlabeled traffic allowed by default
- [ 1.488847] clocksource: Switched to clocksource arch_sys_counter
- [ 1.530299] VFS: Disk quotas dquot_6.6.0
- [ 1.530350] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.530689] AppArmor: AppArmor Filesystem Enabled
- [ 1.530729] pnp: PnP ACPI: disabled
- [ 1.534811] thermal_sys: Registered thermal governor 'fair_share'
- [ 1.534813] thermal_sys: Registered thermal governor 'bang_bang'
- [ 1.534822] thermal_sys: Registered thermal governor 'step_wise'
- [ 1.534829] thermal_sys: Registered thermal governor 'user_space'
- [ 1.535127] NET: Registered protocol family 2
- [ 1.535438] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
- [ 1.535665] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 1.536849] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
- [ 1.537429] TCP: Hash tables configured (established 262144 bind 65536)
- [ 1.537519] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
- [ 1.537927] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
- [ 1.538435] NET: Registered protocol family 1
- [ 1.538453] NET: Registered protocol family 44
- [ 1.538465] PCI: CLS 0 bytes, default 64
- [ 1.538568] Trying to unpack rootfs image as initramfs...
- [ 6.831229] Freeing initrd memory: 37928K
- [ 6.831980] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 6.832181] kvm [1]: IPA Size Limit: 40bits
- [ 6.833172] kvm [1]: vgic-v2@c0e0000
- [ 6.833187] kvm [1]: GIC system register CPU interface enabled
- [ 6.833286] kvm [1]: vgic interrupt IRQ1
- [ 6.833415] kvm [1]: Hyp mode initialized successfully
- [ 6.834477] Initialise system trusted keyrings
- [ 6.834497] Key type blacklist registered
- [ 6.834604] workingset: timestamp_bits=40 max_order=23 bucket_order=0
- [ 6.838782] zbud: loaded
- [ 6.839477] Platform Keyring initialized
- [ 6.848480] Key type asymmetric registered
- [ 6.848487] Asymmetric key parser 'x509' registered
- [ 6.848509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 6.848605] io scheduler mq-deadline registered
- [ 6.848612] io scheduler kyber registered
- [ 6.848692] io scheduler bfq registered
- [ 6.850581] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 6.851293] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges:
- [ 6.851321] layerscape-pcie 3400000.pcie: IO 0x2000010000..0x200001ffff -> 0x0000000000
- [ 6.851340] layerscape-pcie 3400000.pcie: MEM 0x2040000000..0x207fffffff -> 0x0040000000
- [ 6.851374] layerscape-pcie 3400000.pcie: Resources exceed number of ATU entries (0)
- [ 6.851642] layerscape-pcie 3400000.pcie: iATU unroll: disabled
- [ 6.851651] layerscape-pcie 3400000.pcie: Detected iATU regions: 256 outbound, 24 inbound
- [ 7.848906] layerscape-pcie 3400000.pcie: Phy link never came up
- [ 7.848992] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00
- [ 7.849003] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 7.849012] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 7.849023] pci_bus 0000:00: root bus resource [mem 0x2040000000-0x207fffffff] (bus address [0x40000000-0x7fffffff])
- [ 7.849049] pci 0000:00:00.0: [1957:80c0] type 01 class 0x060400
- [ 7.849113] pci 0000:00:00.0: supports D1 D2
- [ 7.849122] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
- [ 7.851099] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 7.851214] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges:
- [ 7.851236] layerscape-pcie 3500000.pcie: IO 0x2800010000..0x280001ffff -> 0x0000000000
- [ 7.851253] layerscape-pcie 3500000.pcie: MEM 0x2840000000..0x287fffffff -> 0x0040000000
- [ 7.851281] layerscape-pcie 3500000.pcie: Resources exceed number of ATU entries (0)
- [ 7.851305] layerscape-pcie 3500000.pcie: iATU unroll: disabled
- [ 7.851314] layerscape-pcie 3500000.pcie: Detected iATU regions: 8 outbound, 6 inbound
- [ 7.951334] layerscape-pcie 3500000.pcie: Link up
- [ 7.951408] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0001:00
- [ 7.951419] pci_bus 0001:00: root bus resource [bus 00-ff]
- [ 7.951429] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
- [ 7.951441] pci_bus 0001:00: root bus resource [mem 0x2840000000-0x287fffffff] (bus address [0x40000000-0x7fffffff])
- [ 7.951462] pci 0001:00:00.0: [1957:80c0] type 01 class 0x060400
- [ 7.951508] pci 0001:00:00.0: supports D1 D2
- [ 7.951516] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
- [ 7.952624] pci 0001:01:00.0: [12d8:b304] type 01 class 0x060400
- [ 7.953299] pci 0001:01:00.0: supports D1 D2
- [ 7.953308] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 7.953556] pci 0001:01:00.0: PTM enabled (root), unknown granularity
- [ 7.953655] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0001:00:00.0 (capable of 8.000 Gb/s with 5 GT/s x2 link)
- [ 7.980077] pci 0001:02:01.0: [12d8:b304] type 01 class 0x060400
- [ 7.980768] pci 0001:02:01.0: supports D1 D2
- [ 7.980776] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 7.981264] pci 0001:02:02.0: [12d8:b304] type 01 class 0x060400
- [ 7.981954] pci 0001:02:02.0: supports D1 D2
- [ 7.981963] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 7.984666] pci 0001:04:00.0: [1b4b:9215] type 00 class 0x010601
- [ 7.984780] pci 0001:04:00.0: reg 0x10: [io 0x11000-0x11007]
- [ 7.984831] pci 0001:04:00.0: reg 0x14: [io 0x11008-0x1100b]
- [ 7.984882] pci 0001:04:00.0: reg 0x18: [io 0x11010-0x11017]
- [ 7.984933] pci 0001:04:00.0: reg 0x1c: [io 0x11018-0x1101b]
- [ 7.984984] pci 0001:04:00.0: reg 0x20: [io 0x11020-0x1103f]
- [ 7.985035] pci 0001:04:00.0: reg 0x24: [mem 0x2840000000-0x28400007ff]
- [ 7.985088] pci 0001:04:00.0: reg 0x30: [mem 0x2840040000-0x284007ffff pref]
- [ 7.985148] pci 0001:04:00.0: Enabling fixed DMA alias to 00.1
- [ 7.985381] pci 0001:04:00.0: PME# supported from D3hot
- [ 7.986871] pci 0001:00:00.0: BAR 14: assigned [mem 0x2840000000-0x28400fffff]
- [ 7.986883] pci 0001:00:00.0: BAR 13: assigned [io 0x10000-0x10fff]
- [ 7.986895] pci 0001:01:00.0: BAR 14: assigned [mem 0x2840000000-0x28400fffff]
- [ 7.986906] pci 0001:01:00.0: BAR 13: assigned [io 0x10000-0x10fff]
- [ 7.986917] pci 0001:02:02.0: BAR 14: assigned [mem 0x2840000000-0x28400fffff]
- [ 7.986928] pci 0001:02:02.0: BAR 13: assigned [io 0x10000-0x10fff]
- [ 7.986937] pci 0001:02:01.0: PCI bridge to [bus 03]
- [ 7.986999] pci 0001:04:00.0: BAR 6: assigned [mem 0x2840000000-0x284003ffff pref]
- [ 7.987011] pci 0001:04:00.0: BAR 5: assigned [mem 0x2840040000-0x28400407ff]
- [ 7.987034] pci 0001:04:00.0: BAR 4: assigned [io 0x10000-0x1001f]
- [ 7.987056] pci 0001:04:00.0: BAR 0: assigned [io 0x10020-0x10027]
- [ 7.987078] pci 0001:04:00.0: BAR 2: assigned [io 0x10028-0x1002f]
- [ 7.987100] pci 0001:04:00.0: BAR 1: assigned [io 0x10030-0x10033]
- [ 7.987121] pci 0001:04:00.0: BAR 3: assigned [io 0x10034-0x10037]
- [ 7.987143] pci 0001:02:02.0: PCI bridge to [bus 04]
- [ 7.987157] pci 0001:02:02.0: bridge window [io 0x10000-0x10fff]
- [ 7.987183] pci 0001:02:02.0: bridge window [mem 0x2840000000-0x28400fffff]
- [ 7.987226] pci 0001:01:00.0: PCI bridge to [bus 02-04]
- [ 7.987240] pci 0001:01:00.0: bridge window [io 0x10000-0x10fff]
- [ 7.987266] pci 0001:01:00.0: bridge window [mem 0x2840000000-0x28400fffff]
- [ 7.987308] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
- [ 7.987317] pci 0001:00:00.0: bridge window [io 0x10000-0x10fff]
- [ 7.987327] pci 0001:00:00.0: bridge window [mem 0x2840000000-0x28400fffff]
- [ 7.987526] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
- [ 7.987549] layerscape-pcie 3600000.pcie: IO 0x3000010000..0x300001ffff -> 0x0000000000
- [ 7.987566] layerscape-pcie 3600000.pcie: MEM 0x3040000000..0x307fffffff -> 0x0040000000
- [ 7.987606] layerscape-pcie 3600000.pcie: Resources exceed number of ATU entries (0)
- [ 7.987630] layerscape-pcie 3600000.pcie: iATU unroll: disabled
- [ 7.987639] layerscape-pcie 3600000.pcie: Detected iATU regions: 8 outbound, 6 inbound
- [ 8.087658] layerscape-pcie 3600000.pcie: Link up
- [ 8.087739] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0002:00
- [ 8.087749] pci_bus 0002:00: root bus resource [bus 00-ff]
- [ 8.087759] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
- [ 8.087771] pci_bus 0002:00: root bus resource [mem 0x3040000000-0x307fffffff] (bus address [0x40000000-0x7fffffff])
- [ 8.087792] pci 0002:00:00.0: [1957:80c0] type 01 class 0x060400
- [ 8.087836] pci 0002:00:00.0: supports D1 D2
- [ 8.087844] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot
- [ 8.088954] pci 0002:01:00.0: [1c5c:174a] type 00 class 0x010802
- [ 8.089117] pci 0002:01:00.0: reg 0x10: [mem 0x3040000000-0x3040003fff 64bit]
- [ 8.089164] pci 0002:01:00.0: reg 0x18: [mem 0x3040004000-0x3040004fff]
- [ 8.089211] pci 0002:01:00.0: reg 0x1c: [mem 0x3040005000-0x3040005fff]
- [ 8.089956] pci 0002:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0002:00:00.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
- [ 8.091017] pci 0002:00:00.0: BAR 14: assigned [mem 0x3040000000-0x30400fffff]
- [ 8.091031] pci 0002:01:00.0: BAR 0: assigned [mem 0x3040000000-0x3040003fff 64bit]
- [ 8.091080] pci 0002:01:00.0: BAR 2: assigned [mem 0x3040004000-0x3040004fff]
- [ 8.091101] pci 0002:01:00.0: BAR 3: assigned [mem 0x3040005000-0x3040005fff]
- [ 8.091122] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
- [ 8.091131] pci 0002:00:00.0: bridge window [mem 0x3040000000-0x30400fffff]
- [ 8.095680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 8.096964] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 8, base_baud = 21875000) is a 16550A
- [ 9.952460] printk: console [ttyS0] enabled
- [ 9.956935] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 8, base_baud = 21875000) is a 16550A
- [ 9.965878] Serial: AMBA driver
- [ 9.969307] msm_serial: driver initialized
- [ 9.974121] arm-smmu 5000000.iommu: probing hardware configuration...
- [ 9.980571] arm-smmu 5000000.iommu: SMMUv2 with:
- [ 9.985185] arm-smmu 5000000.iommu: stage 1 translation
- [ 9.990499] arm-smmu 5000000.iommu: stage 2 translation
- [ 9.995809] arm-smmu 5000000.iommu: nested translation
- [ 10.001038] arm-smmu 5000000.iommu: stream matching with 128 register groups
- [ 10.008174] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
- [ 10.014709] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
- [ 10.021157] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
- [ 10.027598] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
- [ 10.034803] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 10.041402] libphy: Fixed MDIO Bus: probed
- [ 10.045773] libphy: Freescale XGMAC MDIO Bus: probed
- [ 10.060590] mscc: module verification failed: signature and/or required key missing - tainting kernel
- [ 10.140037] libphy: Freescale XGMAC MDIO Bus: probed
- [ 10.151085] libphy: Freescale XGMAC MDIO Bus: probed
- [ 10.161854] libphy: Freescale XGMAC MDIO Bus: probed
- [ 10.189733] libphy: Freescale XGMAC MDIO Bus: probed
- [ 10.217770] mousedev: PS/2 mouse device common for all mice
- [ 10.224529] ledtrig-cpu: registered to indicate activity on CPUs
- [ 10.230865] hidraw: raw HID events driver (C) Jiri Kosina
- [ 10.237423] drop_monitor: Initializing network drop monitor service
- [ 10.244165] NET: Registered protocol family 10
- [ 10.261038] Segment Routing with IPv6
- [ 10.264696] RPL Segment Routing with IPv6
- [ 10.269148] registered taskstats version 1
- [ 10.273251] Loading compiled-in X.509 certificates
- [ 10.278113] Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: 5a240449d29fd0d8a7a187e6fc0e26b95d1aa87b'
- [ 10.288609] zswap: loaded using pool lzo/zbud
- [ 10.293018] page_owner is disabled
- [ 10.308465] Key type encrypted registered
- [ 10.312481] AppArmor: AppArmor sha1 policy hashing enabled
- [ 10.317972] ima: No TPM chip found, activating TPM-bypass!
- [ 10.323463] ima: Allocated hash algorithm: sha256
- [ 10.328185] ima: No architecture policies found
- [ 10.332735] evm: Initialising EVM extended attributes:
- [ 10.337869] evm: security.selinux
- [ 10.341182] evm: security.apparmor
- [ 10.344577] evm: security.ima
- [ 10.347537] evm: security.capability
- [ 10.351109] evm: HMAC attrs: 0x1
- [ 10.355466] fsl_mc_dprc dprc.1: Adding to iommu group 0
- [ 10.441569] fsl_mc_allocator dpbp.9: Adding to iommu group 0
- [ 10.447302] fsl_mc_allocator dpbp.8: Adding to iommu group 0
- [ 10.453033] fsl_mc_allocator dpbp.7: Adding to iommu group 0
- [ 10.458757] fsl_mc_allocator dpbp.6: Adding to iommu group 0
- [ 10.464487] fsl_mc_allocator dpbp.5: Adding to iommu group 0
- [ 10.470220] fsl_mc_allocator dpbp.4: Adding to iommu group 0
- [ 10.475945] fsl_mc_allocator dpbp.3: Adding to iommu group 0
- [ 10.481679] fsl_mc_allocator dpbp.2: Adding to iommu group 0
- [ 10.487406] fsl_mc_allocator dpbp.1: Adding to iommu group 0
- [ 10.493138] fsl_mc_allocator dpbp.0: Adding to iommu group 0
- [ 10.499878] fsl_mc_allocator dpmcp.28: Adding to iommu group 0
- [ 10.506277] fsl_mc_allocator dpmcp.27: Adding to iommu group 0
- [ 10.512684] fsl_mc_allocator dpmcp.26: Adding to iommu group 0
- [ 10.519094] fsl_mc_allocator dpmcp.25: Adding to iommu group 0
- [ 10.525494] fsl_mc_allocator dpmcp.24: Adding to iommu group 0
- [ 10.531905] fsl_mc_allocator dpmcp.23: Adding to iommu group 0
- [ 10.538307] fsl_mc_allocator dpmcp.22: Adding to iommu group 0
- [ 10.544721] fsl_mc_allocator dpmcp.21: Adding to iommu group 0
- [ 10.551130] fsl_mc_allocator dpmcp.20: Adding to iommu group 0
- [ 10.557532] fsl_mc_allocator dpmcp.19: Adding to iommu group 0
- [ 10.563943] fsl_mc_allocator dpmcp.18: Adding to iommu group 0
- [ 10.570349] fsl_mc_allocator dpmcp.17: Adding to iommu group 0
- [ 10.576767] fsl_mc_allocator dpmcp.16: Adding to iommu group 0
- [ 10.583177] fsl_mc_allocator dpmcp.15: Adding to iommu group 0
- [ 10.589586] fsl_mc_allocator dpmcp.14: Adding to iommu group 0
- [ 10.595993] fsl_mc_allocator dpmcp.13: Adding to iommu group 0
- [ 10.602404] fsl_mc_allocator dpmcp.12: Adding to iommu group 0
- [ 10.608808] fsl_mc_allocator dpmcp.11: Adding to iommu group 0
- [ 10.615219] fsl_mc_allocator dpmcp.10: Adding to iommu group 0
- [ 10.621629] fsl_mc_allocator dpmcp.9: Adding to iommu group 0
- [ 10.627946] fsl_mc_allocator dpmcp.8: Adding to iommu group 0
- [ 10.634270] fsl_mc_allocator dpmcp.7: Adding to iommu group 0
- [ 10.640596] fsl_mc_allocator dpmcp.6: Adding to iommu group 0
- [ 10.646914] fsl_mc_allocator dpmcp.5: Adding to iommu group 0
- [ 10.653235] fsl_mc_allocator dpmcp.4: Adding to iommu group 0
- [ 10.659565] fsl_mc_allocator dpmcp.3: Adding to iommu group 0
- [ 10.665884] fsl_mc_allocator dpmcp.2: Adding to iommu group 0
- [ 10.672208] fsl_mc_allocator dpmcp.1: Adding to iommu group 0
- [ 10.678028] fsl_mc_allocator dpcon.79: Adding to iommu group 0
- [ 10.683938] fsl_mc_allocator dpcon.78: Adding to iommu group 0
- [ 10.689852] fsl_mc_allocator dpcon.77: Adding to iommu group 0
- [ 10.695757] fsl_mc_allocator dpcon.76: Adding to iommu group 0
- [ 10.701670] fsl_mc_allocator dpcon.75: Adding to iommu group 0
- [ 10.707572] fsl_mc_allocator dpcon.74: Adding to iommu group 0
- [ 10.713482] fsl_mc_allocator dpcon.73: Adding to iommu group 0
- [ 10.719396] fsl_mc_allocator dpcon.72: Adding to iommu group 0
- [ 10.725298] fsl_mc_allocator dpcon.71: Adding to iommu group 0
- [ 10.731210] fsl_mc_allocator dpcon.70: Adding to iommu group 0
- [ 10.737119] fsl_mc_allocator dpcon.69: Adding to iommu group 0
- [ 10.743030] fsl_mc_allocator dpcon.68: Adding to iommu group 0
- [ 10.748942] fsl_mc_allocator dpcon.67: Adding to iommu group 0
- [ 10.754848] fsl_mc_allocator dpcon.66: Adding to iommu group 0
- [ 10.760760] fsl_mc_allocator dpcon.65: Adding to iommu group 0
- [ 10.766666] fsl_mc_allocator dpcon.64: Adding to iommu group 0
- [ 10.772583] fsl_mc_allocator dpcon.63: Adding to iommu group 0
- [ 10.778490] fsl_mc_allocator dpcon.62: Adding to iommu group 0
- [ 10.784409] fsl_mc_allocator dpcon.61: Adding to iommu group 0
- [ 10.790323] fsl_mc_allocator dpcon.60: Adding to iommu group 0
- [ 10.796234] fsl_mc_allocator dpcon.59: Adding to iommu group 0
- [ 10.802146] fsl_mc_allocator dpcon.58: Adding to iommu group 0
- [ 10.808054] fsl_mc_allocator dpcon.57: Adding to iommu group 0
- [ 10.813969] fsl_mc_allocator dpcon.56: Adding to iommu group 0
- [ 10.819880] fsl_mc_allocator dpcon.55: Adding to iommu group 0
- [ 10.825788] fsl_mc_allocator dpcon.54: Adding to iommu group 0
- [ 10.831706] fsl_mc_allocator dpcon.53: Adding to iommu group 0
- [ 10.837613] fsl_mc_allocator dpcon.52: Adding to iommu group 0
- [ 10.843528] fsl_mc_allocator dpcon.51: Adding to iommu group 0
- [ 10.849443] fsl_mc_allocator dpcon.50: Adding to iommu group 0
- [ 10.855352] fsl_mc_allocator dpcon.49: Adding to iommu group 0
- [ 10.861266] fsl_mc_allocator dpcon.48: Adding to iommu group 0
- [ 10.867175] fsl_mc_allocator dpcon.47: Adding to iommu group 0
- [ 10.873091] fsl_mc_allocator dpcon.46: Adding to iommu group 0
- [ 10.879011] fsl_mc_allocator dpcon.45: Adding to iommu group 0
- [ 10.884920] fsl_mc_allocator dpcon.44: Adding to iommu group 0
- [ 10.890840] fsl_mc_allocator dpcon.43: Adding to iommu group 0
- [ 10.896747] fsl_mc_allocator dpcon.42: Adding to iommu group 0
- [ 10.902667] fsl_mc_allocator dpcon.41: Adding to iommu group 0
- [ 10.908579] fsl_mc_allocator dpcon.40: Adding to iommu group 0
- [ 10.914493] fsl_mc_allocator dpcon.39: Adding to iommu group 0
- [ 10.920409] fsl_mc_allocator dpcon.38: Adding to iommu group 0
- [ 10.926323] fsl_mc_allocator dpcon.37: Adding to iommu group 0
- [ 10.932239] fsl_mc_allocator dpcon.36: Adding to iommu group 0
- [ 10.938151] fsl_mc_allocator dpcon.35: Adding to iommu group 0
- [ 10.944068] fsl_mc_allocator dpcon.34: Adding to iommu group 0
- [ 10.949985] fsl_mc_allocator dpcon.33: Adding to iommu group 0
- [ 10.955896] fsl_mc_allocator dpcon.32: Adding to iommu group 0
- [ 10.961818] fsl_mc_allocator dpcon.31: Adding to iommu group 0
- [ 10.967731] fsl_mc_allocator dpcon.30: Adding to iommu group 0
- [ 10.973651] fsl_mc_allocator dpcon.29: Adding to iommu group 0
- [ 10.979570] fsl_mc_allocator dpcon.28: Adding to iommu group 0
- [ 10.985485] fsl_mc_allocator dpcon.27: Adding to iommu group 0
- [ 10.991401] fsl_mc_allocator dpcon.26: Adding to iommu group 0
- [ 10.997315] fsl_mc_allocator dpcon.25: Adding to iommu group 0
- [ 11.003236] fsl_mc_allocator dpcon.24: Adding to iommu group 0
- [ 11.009152] fsl_mc_allocator dpcon.23: Adding to iommu group 0
- [ 11.015065] fsl_mc_allocator dpcon.22: Adding to iommu group 0
- [ 11.020991] fsl_mc_allocator dpcon.21: Adding to iommu group 0
- [ 11.026903] fsl_mc_allocator dpcon.20: Adding to iommu group 0
- [ 11.032823] fsl_mc_allocator dpcon.19: Adding to iommu group 0
- [ 11.038735] fsl_mc_allocator dpcon.18: Adding to iommu group 0
- [ 11.044655] fsl_mc_allocator dpcon.17: Adding to iommu group 0
- [ 11.050587] fsl_mc_allocator dpcon.16: Adding to iommu group 0
- [ 11.056503] fsl_mc_allocator dpcon.15: Adding to iommu group 0
- [ 11.062423] fsl_mc_allocator dpcon.14: Adding to iommu group 0
- [ 11.068342] fsl_mc_allocator dpcon.13: Adding to iommu group 0
- [ 11.074263] fsl_mc_allocator dpcon.12: Adding to iommu group 0
- [ 11.080186] fsl_mc_allocator dpcon.11: Adding to iommu group 0
- [ 11.086099] fsl_mc_allocator dpcon.10: Adding to iommu group 0
- [ 11.092021] fsl_mc_allocator dpcon.9: Adding to iommu group 0
- [ 11.097852] fsl_mc_allocator dpcon.8: Adding to iommu group 0
- [ 11.103685] fsl_mc_allocator dpcon.7: Adding to iommu group 0
- [ 11.109520] fsl_mc_allocator dpcon.6: Adding to iommu group 0
- [ 11.115351] fsl_mc_allocator dpcon.5: Adding to iommu group 0
- [ 11.121186] fsl_mc_allocator dpcon.4: Adding to iommu group 0
- [ 11.127016] fsl_mc_allocator dpcon.3: Adding to iommu group 0
- [ 11.132850] fsl_mc_allocator dpcon.2: Adding to iommu group 0
- [ 11.138679] fsl_mc_allocator dpcon.1: Adding to iommu group 0
- [ 11.144519] fsl_mc_allocator dpcon.0: Adding to iommu group 0
- [ 11.162923] fsl_mc_dprc dprc.1: DPRC device bound to driver
- [ 11.168556] pcieport 0000:00:00.0: Adding to iommu group 1
- [ 11.174193] pcieport 0000:00:00.0: PME: Signaling with IRQ 353
- [ 11.180144] pcieport 0000:00:00.0: AER: enabled with IRQ 353
- [ 11.185937] pcieport 0001:00:00.0: Adding to iommu group 2
- [ 11.191535] pcieport 0001:00:00.0: PME: Signaling with IRQ 354
- [ 11.197511] pcieport 0001:00:00.0: AER: enabled with IRQ 354
- [ 11.203279] pcieport 0001:01:00.0: Adding to iommu group 2
- [ 11.209778] pcieport 0001:02:01.0: Adding to iommu group 2
- [ 11.216018] pcieport 0001:02:01.0: DPC: error containment capabilities: Int Msg #1, RPExt- PoisonedTLP- SwTrigger- RP PIO Log 0, DL_ActiveErr-
- [ 11.229335] pcieport 0001:02:02.0: Adding to iommu group 2
- [ 11.235567] pcieport 0001:02:02.0: DPC: error containment capabilities: Int Msg #1, RPExt- PoisonedTLP- SwTrigger- RP PIO Log 0, DL_ActiveErr-
- [ 11.248902] pcieport 0002:00:00.0: Adding to iommu group 3
- [ 11.254488] pcieport 0002:00:00.0: PME: Signaling with IRQ 360
- [ 11.260450] pcieport 0002:00:00.0: AER: enabled with IRQ 360
- [ 11.266236] hctosys: unable to open rtc device (rtc0)
- [ 11.275435] Freeing unused kernel memory: 6464K
- [ 11.280069] Run /init as init process
- [ 11.299275] systemd[1]: System time before build time, advancing clock.
- [ 11.511267] systemd[1]: systemd 246.16+suse.191.g3850086c65 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 11.535749] systemd[1]: Detected architecture arm64.
- [ 11.540729] systemd[1]: Running in initial RAM disk.
- Welcome to Rockstor built on openSUSE Leap 15.3 dracut-049.1+suse.218.gca24e614-3.48.3 (Initramfs)!
- [ 11.638946] systemd[1]: No hostname configured.
- [ 11.643483] systemd[1]: Set hostname to <localhost>.
- [ 11.648531] random: systemd: uninitialized urandom read (16 bytes read)
- [ 11.655176] systemd[1]: Initializing machine ID from random generator.
- [ 11.851259] systemd[1]: Queued start job for default target Initrd Default Target.
- [ 11.859186] random: systemd: uninitialized urandom read (16 bytes read)
- [ 11.865944] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ 11.909124] random: systemd: uninitialized urandom read (16 bytes read)
- [ 11.915753] systemd[1]: Reached target Local Encrypted Volumes.
- [ OK ] Reached target Local Encrypted Volumes.
- [ 11.948962] systemd[1]: Reached target Local File Systems.
- [ OK ] Reached target Local File Systems.
- [ 11.988903] systemd[1]: Reached target Paths.
- [ OK ] Reached target Paths.
- [ 12.018924] systemd[1]: Reached target Slices.
- [ OK ] Reached target Slices.
- [ 12.048925] systemd[1]: Reached target Swap.
- [ OK ] Reached target Swap.
- [ 12.078918] systemd[1]: Reached target Timers.
- [ OK ] Reached target Timers.
- [ 12.109123] systemd[1]: Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- [ 12.149084] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 12.179106] systemd[1]: Listening on udev Control Socket.
- [ OK ] Listening on udev Control Socket.
- [ 12.219057] systemd[1]: Listening on udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 12.262006] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
- [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
- [ 12.301076] systemd[1]: Starting One time configuration for iscsid.service...
- Starting One time configuration for iscsid.service...
- [ 12.341273] systemd[1]: Starting Create list of static device nodes for the current kernel...
- Starting Create list of st…odes for the current kernel...
- [ 12.382443] systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [ 12.421498] systemd[1]: Starting Load Kernel Modules...
- Starting Load Kernel Modules...
- [ 12.461013] systemd[1]: Starting Setup Virtual Console...
- Starting Setup Virtual Console...
- [ 12.475967] SCSI subsystem initialized
- [ 12.wc3 3110000.usb: Failed to get clk 'ref': -2eeded.
- 0m] Reached targ[ 15.119269] dwc3 3110000.usb: IRQ host not foundid.service.
- et Syst[ 15.125174] dwc3 3110000.usb: IRQ dwc_usb3 not found
- em Initializatio[ 15.125573] nvme 0002:01:00.0: Adding to iommu group 3r the current kernel.
- n. OK ] Finished Create list of st… nodes for the current kernel.
- [ 15.131180] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
- [ 15.132464] fsl_mc_dpio dpio.7: Adding to iommu group 0
- [ 15.138361] nvme nvme0: pci function 0002:01:00.0nsole.
- [ 15.153539] fsl_mc_dpio dpio.7: probed
- [ 15.156311] libata version 3.00 loaded.Sockets.
- [ 15.157512] Internal error: synchronous external abort: 96000210 [#1] SMP
- [ 15.161019] fsl_mc_dpio dpio.6: Adding to iommu group 0cut ask for additional cmdline parameters being skipped.
- [ 15.164100] Modules linked in: authenc libdes libata fsl_mc_dpio(+) nvme sdhci_of_esdhc nvme_core dwc3 sdhci_pltfm t10_pi caam sdhci error rtc_fsl_ftm_alarm mmc_core ulpi udc_core i2c_imx sfp gpio_keys mdio_i2c sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls zlib_deflate cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sg scsi_mod mscc(E)
- [ 15.179153] fsl_mc_dpio dpio.6: probed Kernel Variables...
- [ 15.215057] Supported: YesI transport class v2.0-870.
- [ 15.215063] CPU: 4 PID: 7 Comm: kworker/u16:0 Tainted: G E 5.3.18-59.37-default #1 SLE15-SP3
- [ 15.215065] Hardware name: traverse ten64/ten64, BIOS 2020.07-rc1-ga94e0d21 03/15/2022
- [ 15.215080] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
- [ 15.219472] fsl_mc_dpio dpio.5: Adding to iommu group 0
- [ 15.221533] pstate: a0000005 (NzCv daif -PAN -UAO)
- [ 15.235486] fsl_mc_dpio dpio.5: probeds) missed due to ratelimiting
- [ 15.239371] pc : nvme_reset_work+0x16c/0x1318 [nvme]
- [ 15.239378] lr : nvme_reset_work+0x164/0x1318 [nvme]les.
- [ 15.239379] sp : ffff8000100a3c80bles.
- [ 15.239381] x29: ffff8000100a3c80 x28: ffff644ff18ac0c0
- [ 15.246358] fsl_mc_dpio dpio.4: Adding to iommu group 0
- [ 15.250177] x27: ffff644ff18ac0c0 x26: ffff644ff05b52c0
- [ 15.250180] x25: ffff644ff05b5300 x24: ffff644ff05b5710
- [ 15.250183] x23: ffff644ff18ac000 x22: ffff644ff05b5000
- [ 15.250186] x21: ffffafbc98999000 x20: ffff644ff05b4f10
- [ 15.250189] x19: ffff644ff05b5000 x18: 0000000000000032
- [ 15.250193] x17: 0000000000000000 x16: ffffafbc973a3cf8
- [ 15.258621] fsl_mc_dpio dpio.4: probedule: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
- [ 15.258722] x15: ffff6448ffd6b210 x14: ffff644ff0cd23f0 r. 2015)
- [ 15.264265] fsl_mc_dpio dpio.3: Adding to iommu group 0
- [ 15.268638] x13: 0000000000000000 x12: 0000000000000018 (Apr. 2015)
- [ 15.275550] fsl_mc_dpio dpio.3: probedt (cxgb4i)
- [ 15.277252] x11: 0000000000000003 x10: 0000000000001a50 d.
- [ 15.283037] fsl_mc_dpio dpio.2: Adding to iommu group 0015)
- [ 15.287779] x9 : ffff8000100a3d10 x8 : 0000000000000004 10.1 (Jul 16, 2014)
- [ 15.296694] fsl_mc_dpio dpio.2: probedt (bnx2i)
- [ 15.298392] x7 : 0000000000000006 x6 : 0000000000010000
- [ 15.304262] fsl_mc_dpio dpio.1: Adding to iommu group 0
- [ 15.309003] x5 : 0000000000000000 x4 : 0000000000000000
- [ 15.309006] x3 : 0000000080000000 x2 : 0000000000000000
- [ 15.309008] x1 : ffffffffffffffff x0 : ffff80001101601c
- [ 15.317915] fsl_mc_dpio dpio.1: probed.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
- [ 15.318059] Call trace:ered named UNIX socket transport module.
- [ 15.323929] fsl_mc_dpio dpio.0: Adding to iommu group 0
- [ 15.328593] nvme_reset_work+0x16c/0x1318 [nvme].
- [ 15.337494] fsl_mc_dpio dpio.0: probed1 backchannel transport module.
- [ 15.337639] process_one_work+0x200/0x458
- [ 15.407410] worker_thread+0x144/0x4f0evice Events and Files...
- [ 15.407414] kthread+0x130/0x138 for Device Events and Files.
- [ 15.407418] ret_from_fork+0x10/0x18ok...
- [ OK ]ode: aa1c03e0 940005b3 f9414ac0 91007000 (b9400000)
- 0m] Reached targ[ 15.407428] ---[ end trace 7f30513132c1d956 ]---
- et Basi[ 15.411123] usbcore: registered new interface driver usbfsut0
- c System.0520] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
- [ 15.413928] pca953x 0-0076: 0-0076 supply vcc not found, using dummy regulator
- [ 15.414582] usbcore: registered new interface driver hubrecovery not supported
- [ 15.418168] pca953x 0-0076: using no AIregistered
- [ 15.425716] usbcore: registered new device driver usbry not supported
- [ 15.441241] GPIO line 381 (admin_led_lower) hogged as output/low
- [ 15.453058] OF: /soc/pcie@3500000: no iommu-map translation for id 0x401 on (null)
- [ 15.462101] fsl_dpaa2_eth dpni.9: Adding to iommu group 0e driver
- [ 15.467363] ahci 0001:04:00.0: version 3.0
- [ 15.480898] dpaa2_caam dpseci.0: Adding to iommu group 0
- [ 15.484445] Internal error: synchronous external abort: 96000210 [#2] SMP
- [ 15.496484] Modules linked in: dpaa2_caam(+) caam_jr(+) ahci(+) caamhash_desc fsl_dpaa2_eth(+) caamalg_desc sha2_ce phylink usbcore crypto_engine gpio_pca953x libahci sha256_arm64 authenc libdes libata fsl_mc_dpio nvme sdhci_of_esdhc nvme_core dwc3 sdhci_pltfm t10_pi caam sdhci error rtc_fsl_ftm_alarm mmc_core ulpi udc_core i2c_imx sfp gpio_keys mdio_i2c sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls zlib_deflate cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sg scsi_mod mscc(E)
- [ 15.508887] dpaa2_caam dpseci.0: dpseci v5.3
- [ 15.548188] Supported: Yes
- [ 15.548195] CPU: 6 PID: 496 Comm: systemd-udevd Tainted: G D E 5.3.18-59.37-default #1 SLE15-SP3
- [ 15.548197] Hardware name: traverse ten64/ten64, BIOS 2020.07-rc1-ga94e0d21 03/15/2022
- [ 15.548200] pstate: 30000005 (nzCV daif -PAN -UAO)
- [ 15.548213] pc : ahci_enable_ahci+0x20/0x90 [libahci]
- [ 15.548222] lr : ahci_save_initial_config+0x34/0x390 [libahci]
- [ 15.568848] fsl_mc_dprc dprc.1 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 512
- [ 15.573181] sp : ffff8000113b37b0
- [ 15.573838] fsl_dpaa2_eth dpni.9 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 15.574343] fsl_dpaa2_eth dpni.9 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 15.623190] x29: ffff8000113b37b0 x28: ffff644fb8d24680
- [ 15.623194] x27: ffffafbc68306a50 x26: ffff644ff18a80c0
- [ 15.623198] x25: ffff8000113b38b0 x24: 0000000000000000
- [ 15.639136] x23: ffff644ff18a80c0 x22: ffff80001107d000
- [ 15.639140] x21: 0000000000000000 x20: ffff80001107d004
- [ 15.649760] x19: ffff644ff18a8000 x18: ffffffffffffffff
- x17: 0000000000000031 x16: ffffafbc97850c08 ue hook...
- [ 15.665074] x15: ffff80001107f000 x14: 0000002840040000
- [ 15.665077] x13: ffffafbc98294000 x12: 0000000000000028
- [ 15.675698] x11: 0101010101010101 x10: ffff7f7f7f7f7f7f
- [ 15.675701] x9 : fefdff646c756d5e x8 : 7f7f7f7f7f7f7f7f
- [ 15.686325] x7 : 63646f6f606c6471 x6 : 0000000000800000
- [ 15.686328] x5 : 0000000000000000 x4 : 0000000000000000
- [ 15.696950] x3 : ffff644ff1891c18 x2 : 09502f0c153fa000
- [ 15.702259] x1 : ffff644fb8d24680 x0 : ffffafbc68283f2c
- [ 15.707567] Call trace:
- [ 15.710018] ahci_enable_ahci+0x20/0x90 [libahci]
- [ 15.714723] ahci_save_initial_config+0x34/0x390 [libahci]
- [ 15.720217] ahci_init_one+0x360/0xd7c [ahci]
- [ 15.724573] local_pci_probe+0x44/0x98
- [ 15.728320] pci_device_probe+0x130/0x1c0
- [ 15.732328] really_probe+0xdc/0x448
- [ 15.735900] driver_probe_device+0x12c/0x148
- [ 15.740167] device_driver_attach+0x74/0x98
- [ 15.744348] __driver_attach+0x6c/0x168
- [ 15.748180] bus_for_each_dev+0x84/0xd8
- [ 15.752012] driver_attach+0x30/0x40
- [ 15.755583] bus_add_driver+0x170/0x258
- [ 15.759416] driver_register+0x64/0x118
- [ 15.763247] __pci_register_driver+0x58/0x68
- [ 15.767519] ahci_pci_driver_init+0x30/0x1000 [ahci]
- [ 15.772483] do_one_initcall+0x50/0x240
- [ 15.776315] do_init_module+0x60/0x204
- [ 15.780060] load_module+0x207c/0x2118
- [ 15.783805] __se_sys_init_module+0x1d8/0x290
- [ 15.788157] __arm64_sys_init_module+0x24/0x30
- [ 15.792599] el0_svc_common.constprop.0+0x84/0x218
- [ 15.797386] el0_svc_handler+0x34/0x90
- [ 15.801131] el0_svc+0x10/0x14
- [ 15.804184] Code: aa0003f4 aa1e03e0 91001294 d503201f (b9400293)
- [ 15.810276] ---[ end trace 7f30513132c1d957 ]---
- [ 15.820470] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 15.825981] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
- [ 15.833779] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
- [ 15.837925] dpaa2_caam dpseci.0: FD error: 000000a0
- [ 15.843226] xhci-hcd xhci-hcd.1.auto: irq 14, io mem 0x03100000
- [ 15.848288] dpaa2_caam dpseci.0: FD error: 000000a0
- [ 15.854207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
- [ 15.858900] dpaa2_caam dpseci.0: FD error: 000000a0
- [ 15.867146] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 15.872052] dpaa2_caam dpseci.0: FD error: 000000a0
- [ 15.879270] usb usb1: Product: xHCI Host Controller
- [ 15.879274] usb usb1: Manufacturer: Linux 5.3.18-59.37-default xhci-hcd
- [ 15.884179] dpaa2_caam dpseci.0: FD error: 000000a0
- [ 15.889029] usb usb1: SerialNumber: xhci-hcd.1.auto
- [ 15.889614] hub 1-0:1.0: USB hub found
- [ 15.895681] dpaa2_caam dpseci.0: FD error: 000000a0
- [ 15.900559] hub 1-0:1.0: 1 port detected
- [ 15.905440] dpaa2_caam dpseci.0: FD error: 000000a0
- [ 15.909513] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 15.917295] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam-qi2)
- [ 15.917965] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
- [ 15.922914] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam-qi2)
- [ 15.928334] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 15.938578] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam-qi2)
- [ 15.945321] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 15.954614] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam-qi2)
- [ 15.961152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
- [ 15.971483] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam-qi2)
- [ 15.979454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 15.979458] usb usb2: Product: xHCI Host Controller
- [ 15.990248] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam-qi2)
- [ 15.996687] usb usb2: Manufacturer: Linux 5.3.18-59.37-default xhci-hcd
- [ 16.007362] alg: No test for authenc(hmac(sha384),cbc(aes)) (authenc-hmac-sha384-cbc-aes-caam-qi2)
- [ 16.014524] usb usb2: SerialNumber: xhci-hcd.1.auto
- [ 16.014859] hub 2-0:1.0: USB hub found
- [ 16.019495] alg: No test for echainiv(authenc(hmac(sha384),cbc(aes))) (echainiv-authenc-hmac-sha384-cbc-aes-caam-qi2)
- [ 16.030066] hub 2-0:1.0: 1 port detected
- [ 16.038554] alg: No test for echainiv(authenc(hmac(sha512),cbc(aes))) (echainiv-authenc-hmac-sha512-cbc-aes-caam-qi2)
- [ 16.045949] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 16.050570] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam-qi2)
- [ 16.054269] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
- [ 16.064944] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam-qi2)
- [ 16.068907] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
- [ 16.079817] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam-qi2)
- [ 16.084928] xhci-hcd xhci-hcd.2.auto: irq 15, io mem 0x03110000
- [ 16.094606] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam-qi2)
- [ 16.102956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
- [ 16.113241] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam-qi2)
- [ 16.122266] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 16.133828] alg: No test for echainiv(authenc(hmac(sha384),cbc(des3_ede))) (echainiv-authenc-hmac-sha384-cbc-des3_ede-caam-qi2)
- [ 16.139324] usb usb3: Product: xHCI Host Controller
- [ 16.139328] usb usb3: Manufacturer: Linux 5.3.18-59.37-default xhci-hcd
- [ 16.139332] usb usb3: SerialNumber: xhci-hcd.2.auto
- [ 16.139658] hub 3-0:1.0: USB hub found
- [ 16.151252] alg: No test for echainiv(authenc(hmac(sha512),cbc(des3_ede))) (echainiv-authenc-hmac-sha512-cbc-des3_ede-caam-qi2)
- [ 16.159124] hub 3-0:1.0: 1 port detected
- [ 16.170684] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam-qi2)
- [ 16.178047] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 16.189411] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam-qi2)
- [ 16.194214] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
- [ 16.194224] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
- [ 16.201251] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam-qi2)
- [ 16.206585] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 16.209901] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam-qi2)
- [ 16.221066] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
- [ 16.233761] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam-qi2)
- [ 16.238862] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 16.238865] usb usb4: Product: xHCI Host Controller
- [ 16.238869] usb usb4: Manufacturer: Linux 5.3.18-59.37-default xhci-hcd
- [ 16.238872] usb usb4: SerialNumber: xhci-hcd.2.auto
- [ 16.239204] hub 4-0:1.0: USB hub found
- [ 16.249410] alg: No test for echainiv(authenc(hmac(sha384),cbc(des))) (echainiv-authenc-hmac-sha384-cbc-des-caam-qi2)
- [ 16.256657] hub 4-0:1.0: 1 port detected
- [ 16.263614] alg: No test for echainiv(authenc(hmac(sha512),cbc(des))) (echainiv-authenc-hmac-sha512-cbc-des-caam-qi2)
- [ 16.363821] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam-qi2)
- [ 16.373840] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam-qi2)
- [ 16.385036] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam-qi2)
- [ 16.396350] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam-qi2)
- [ 16.406886] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam-qi2)
- [ 16.418657] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam-qi2)
- [ 16.430398] alg: No test for seqiv(authenc(hmac(sha384),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha384-rfc3686-ctr-aes-caam-qi2)
- [ 16.442113] alg: No test for seqiv(authenc(hmac(sha512),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha512-rfc3686-ctr-aes-caam-qi2)
- [ 16.446148] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam)
- [ 16.453715] dpaa2_caam dpseci.0: algorithms registered in /proc/crypto
- [ 16.463776] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam)
- [ 16.478876] usb 3-1: new high-speed USB device number 2 using xhci-hcd
- [ 16.480356] alg: No test for authenc(hmac(sha384),ecb(cipher_null)) (authenc-hmac-sha384-ecb-cipher_null-caam)
- [ 16.497001] alg: No test for authenc(hmac(sha512),ecb(cipher_null)) (authenc-hmac-sha512-ecb-cipher_null-caam)
- [ 16.507085] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
- [ 16.515284] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam)
- [ 16.564082] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam)
- [ 16.574134] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
- [ 16.582946] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam)
- [ 16.583470] fsl_dpaa2_eth dpni.9: fsl_mc_driver_probe failed: -22
- [ 16.599419] fsl_dpaa2_eth: probe of dpni.9 failed with error -22
- [ 16.605510] fsl_dpaa2_eth dpni.8: Adding to iommu group 0
- [ 16.632592] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam)
- [ 16.642981] alg: No test for authenc(hmac(sha384),cbc(aes)) (authenc-hmac-sha384-cbc-aes-caam)
- [ 16.651741] alg: No test for echainiv(authenc(hmac(sha384),cbc(aes))) (echainiv-authenc-hmac-sha384-cbc-aes-caam)
- [ 16.689339] usb 3-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.08
- [ 16.697521] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 16.698505] dpaa2_caam dpseci.0: hash algorithms registered in /proc/crypto
- [ 16.701122] alg: No test for echainiv(authenc(hmac(sha512),cbc(aes))) (echainiv-authenc-hmac-sha512-cbc-aes-caam)
- [ 16.701188] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
- [ 16.701254] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam)
- [ 16.704667] usb 3-1: Product: USB2744
- [ 16.706098] fsl_dpaa2_eth dpni.8 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 16.706604] fsl_dpaa2_eth dpni.8 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 16.706958] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam)
- [ 16.712777] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam)
- [ 16.721927] usb 3-1: Manufacturer: Microchip Tech
- [ 16.781872] hub 3-1:1.0: USB hub found
- [ 16.794098] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam)
- [ 16.807940] hub 3-1:1.0: 4 ports detected
- [ 16.817792] alg: No test for echainiv(authenc(hmac(sha384),cbc(des3_ede))) (echainiv-authenc-hmac-sha384-cbc-des3_ede-caam)
- [ 16.834717] alg: No test for echainiv(authenc(hmac(sha512),cbc(des3_ede))) (echainiv-authenc-hmac-sha512-cbc-des3_ede-caam)
- [ 16.845738] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 16.845936] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
- [ 16.861084] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam)
- [ 16.876605] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam)
- [ 16.886886] usb 4-1: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.08
- [ 16.892265] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam)
- [ 16.895081] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
- [ 16.910999] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam)
- [ 16.912481] usb 4-1: Product: USB5744
- [ 16.926403] usb 4-1: Manufacturer: Microchip Tech
- [ 16.928384] alg: No test for echainiv(authenc(hmac(sha384),cbc(des))) (echainiv-authenc-hmac-sha384-cbc-des-caam)
- [ 16.947136] alg: No test for echainiv(authenc(hmac(sha512),cbc(des))) (echainiv-authenc-hmac-sha512-cbc-des-caam)
- [ 16.957501] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam)
- [ 16.957873] hub 4-1:1.0: USB hub found
- [ 16.967162] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam)
- [ 16.970865] hub 4-1:1.0: 4 ports detected
- [ 16.981696] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam)
- [ 16.996535] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam)
- [ 17.006722] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam)
- [ 17.018109] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam)
- [ 17.029481] alg: No test for seqiv(authenc(hmac(sha384),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha384-rfc3686-ctr-aes-caam)
- [ 17.040894] alg: No test for seqiv(authenc(hmac(sha512),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha512-rfc3686-ctr-aes-caam)
- [ 17.052151] caam algorithms registered in /proc/crypto
- [ 17.223589] fsl_dpaa2_eth dpni.8: fsl_mc_driver_probe failed: -22
- [ 17.229781] fsl_dpaa2_eth: probe of dpni.8 failed with error -22
- [ 17.235881] fsl_dpaa2_eth dpni.7: Adding to iommu group 0
- [ 17.337236] fsl_dpaa2_eth dpni.7 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 17.349266] fsl_dpaa2_eth dpni.7 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 17.817941] caam 8000000.crypto: caam pkc algorithms registered in /proc/crypto
- [ 17.825291] caam 8000000.crypto: registering rng-caam
- [ 17.843489] fsl_dpaa2_eth dpni.7: fsl_mc_driver_probe failed: -22
- [ 17.849683] fsl_dpaa2_eth: probe of dpni.7 failed with error -22
- [ 17.855773] fsl_dpaa2_eth dpni.6: Adding to iommu group 0
- [ 17.956366] fsl_dpaa2_eth dpni.6 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 17.968364] fsl_dpaa2_eth dpni.6 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 18.363424] fsl_dpaa2_eth dpni.6: fsl_mc_driver_probe failed: -22
- [ 18.369579] fsl_dpaa2_eth: probe of dpni.6 failed with error -22
- [ 18.375651] fsl_dpaa2_eth dpni.5: Adding to iommu group 0
- [ 18.477149] fsl_dpaa2_eth dpni.5 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 18.489156] fsl_dpaa2_eth dpni.5 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 18.863418] fsl_dpaa2_eth dpni.5: fsl_mc_driver_probe failed: -22
- [ 18.869567] fsl_dpaa2_eth: probe of dpni.5 failed with error -22
- [ 18.875628] fsl_dpaa2_eth dpni.4: Adding to iommu group 0
- [ 18.977112] fsl_dpaa2_eth dpni.4 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 18.989119] fsl_dpaa2_eth dpni.4 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 19.363413] fsl_dpaa2_eth dpni.4: fsl_mc_driver_probe failed: -22
- [ 19.369558] fsl_dpaa2_eth: probe of dpni.4 failed with error -22
- [ 19.375621] fsl_dpaa2_eth dpni.3: Adding to iommu group 0
- [ 19.476087] fsl_dpaa2_eth dpni.3 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 19.488086] fsl_dpaa2_eth dpni.3 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 19.873419] fsl_dpaa2_eth dpni.3: fsl_mc_driver_probe failed: -22
- [ 19.879571] fsl_dpaa2_eth: probe of dpni.3 failed with error -22
- [ 19.885634] fsl_dpaa2_eth dpni.2: Adding to iommu group 0
- [ 19.986102] fsl_dpaa2_eth dpni.2 (unnamed net_device) (uninitialized): failed to validate link configuration for in-band status
- [ 19.998099] fsl_dpaa2_eth dpni.2 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 20.393420] fsl_dpaa2_eth dpni.2: fsl_mc_driver_probe failed: -22
- [ 20.399566] fsl_dpaa2_eth: probe of dpni.2 failed with error -22
- [ 20.405631] fsl_dpaa2_eth dpni.1: Adding to iommu group 0
- [ 20.506600] fsl_dpaa2_eth dpni.1 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 20.873417] fsl_dpaa2_eth dpni.1: fsl_mc_driver_probe failed: -22
- [ 20.879561] fsl_dpaa2_eth: probe of dpni.1 failed with error -22
- [ 20.885625] fsl_dpaa2_eth dpni.0: Adding to iommu group 0
- [ 20.986580] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 21.353415] fsl_dpaa2_eth dpni.0: fsl_mc_driver_probe failed: -22
- [ 21.359561] fsl_dpaa2_eth: probe of dpni.0 failed with error -22
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement