etnguyen03

Optiplex 745 SMART

Jun 17th, 2020
97
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.19 KB | None | 0 0
  1. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.2-arch1-1] (local build)
  2. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.10
  6. Device Model: ST3320620AS
  7. Serial Number: 5QF47KBG
  8. Firmware Version: 3.ADG
  9. User Capacity: 320,072,933,376 bytes [320 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  13. Local Time is: Wed Jun 17 18:41:59 2020 EDT
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x82) Offline data collection activity
  22. was completed without error.
  23. Auto Offline Data Collection: Enabled.
  24. Self-test execution status: ( 0) The previous self-test routine completed
  25. without error or no self-test has ever
  26. been run.
  27. Total time to complete Offline
  28. data collection: ( 430) seconds.
  29. Offline data collection
  30. capabilities: (0x5b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. No Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 2) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 107) minutes.
  47.  
  48. SMART Attributes Data Structure revision number: 10
  49. Vendor Specific SMART Attributes with Thresholds:
  50. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  51. 1 Raw_Read_Error_Rate 0x000f 117 087 006 Pre-fail Always - 135779684
  52. 3 Spin_Up_Time 0x0003 094 094 070 Pre-fail Always - 0
  53. 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2428
  54. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  55. 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 485503336
  56. 9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 49405
  57. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  58. 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2415
  59. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  60. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  61. 190 Airflow_Temperature_Cel 0x0022 050 048 045 Old_age Always - 50 (Min/Max 26/52)
  62. 194 Temperature_Celsius 0x0022 050 052 000 Old_age Always - 50 (0 17 0 0 0)
  63. 195 Hardware_ECC_Recovered 0x001a 060 055 000 Old_age Always - 191856143
  64. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  65. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  66. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  67. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  68. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  69.  
  70. SMART Error Log Version: 1
  71. No Errors Logged
  72.  
  73. SMART Self-test log structure revision number 1
  74. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  75. # 1 Extended offline Completed without error 00% 49405 -
  76. # 2 Short offline Completed without error 00% 49404 -
  77. # 3 Extended offline Completed without error 00% 1 -
  78. # 4 Short offline Completed without error 00% 0 -
  79.  
  80. SMART Selective self-test log data structure revision number 1
  81. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  82. 1 0 0 Not_testing
  83. 2 0 0 Not_testing
  84. 3 0 0 Not_testing
  85. 4 0 0 Not_testing
  86. 5 0 0 Not_testing
  87. Selective self-test flags (0x0):
  88. After scanning selected spans, do NOT read-scan remainder of disk.
  89. If Selective self-test is pending on power-up, resume after 0 minute delay.
Add Comment
Please, Sign In to add comment