Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 5.2.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 SMP Debian 5.2.9-2 (2019-08-21)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-2-amd64 root=UUID=a16b4a41-f65c-4fed-aeec-ffb979951f94 ro quiet elevator=noop
- [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfceffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bfcf0000-0x00000000bfcf0fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bfcf1000-0x00000000bfcfffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000bfd00000-0x00000000bfdfffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FF 11/24/2010
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 3013.236 MHz processor
- [ 0.005291] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.005293] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.011312] AGP: No AGP bridge found
- [ 0.011368] last_pfn = 0x440000 max_arch_pfn = 0x400000000
- [ 0.011371] MTRR default type: uncachable
- [ 0.011372] MTRR fixed ranges enabled:
- [ 0.011373] 00000-9FFFF write-back
- [ 0.011374] A0000-BFFFF uncachable
- [ 0.011374] C0000-C7FFF write-protect
- [ 0.011375] C8000-FFFFF uncachable
- [ 0.011376] MTRR variable ranges enabled:
- [ 0.011377] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.011378] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.011379] 2 base 0000BFD00000 mask FFFFFFF00000 uncachable
- [ 0.011380] 3 base 0000BFE00000 mask FFFFFFE00000 uncachable
- [ 0.011381] 4 base 000100000000 mask FFFF00000000 write-back
- [ 0.011382] 5 base 000200000000 mask FFFE00000000 write-back
- [ 0.011382] 6 base 000400000000 mask FFFFC0000000 write-back
- [ 0.011383] 7 disabled
- [ 0.011384] TOM2: 0000000440000000 aka 17408M
- [ 0.012871] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.012923] e820: update [mem 0xbfd00000-0xffffffff] usable ==> reserved
- [ 0.012928] last_pfn = 0xbfcf0 max_arch_pfn = 0x400000000
- [ 0.014406] found SMP MP-table at [mem 0x000f44e0-0x000f44ef]
- [ 0.033030] Using GB pages for direct mapping
- [ 0.033031] BRK [0x43ea01000, 0x43ea01fff] PGTABLE
- [ 0.033033] BRK [0x43ea02000, 0x43ea02fff] PGTABLE
- [ 0.033034] BRK [0x43ea03000, 0x43ea03fff] PGTABLE
- [ 0.033063] BRK [0x43ea04000, 0x43ea04fff] PGTABLE
- [ 0.033151] BRK [0x43ea05000, 0x43ea05fff] PGTABLE
- [ 0.033177] BRK [0x43ea06000, 0x43ea06fff] PGTABLE
- [ 0.033224] RAMDISK: [mem 0x33a63000-0x35d28fff]
- [ 0.033235] ACPI: Early table checksum verification disabled
- [ 0.033649] ACPI: RSDP 0x00000000000F5E80 000014 (v00 GBT )
- [ 0.033652] ACPI: RSDT 0x00000000BFCF1000 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.033656] ACPI: FACP 0x00000000BFCF1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.033660] ACPI: DSDT 0x00000000BFCF1100 0076BC (v01 GBT GBTUACPI 00001000 MSFT 03000000)
- [ 0.033662] ACPI: FACS 0x00000000BFCF0000 000040
- [ 0.033664] ACPI: SSDT 0x00000000BFCF8880 000EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
- [ 0.033666] ACPI: MCFG 0x00000000BFCF97C0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.033668] ACPI: MATS 0x00000000BFCF9800 000034 (v01 GBT 00000000 00000000)
- [ 0.033670] ACPI: TAMG 0x00000000BFCF9870 000202 (v01 GBT GBT B0 5455312E BG?? 53450101)
- [ 0.033673] ACPI: APIC 0x00000000BFCF87C0 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.033682] ACPI: Local APIC address 0xfee00000
- [ 0.033762] Scanning NUMA topology in Northbridge 24
- [ 0.033791] No NUMA configuration found
- [ 0.033792] Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
- [ 0.033796] NODE_DATA(0) allocated [mem 0x43fffb000-0x43fffffff]
- [ 0.033832] Zone ranges:
- [ 0.033833] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.033833] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.033834] Normal [mem 0x0000000100000000-0x000000043fffffff]
- [ 0.033835] Device empty
- [ 0.033836] Movable zone start for each node
- [ 0.033836] Early memory node ranges
- [ 0.033837] node 0: [mem 0x0000000000001000-0x0000000000097fff]
- [ 0.033838] node 0: [mem 0x0000000000100000-0x00000000bfceffff]
- [ 0.033838] node 0: [mem 0x0000000100000000-0x000000043fffffff]
- [ 0.033851] Zeroed struct page in unavailable ranges: 889 pages
- [ 0.033852] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
- [ 0.033853] On node 0 totalpages: 4193415
- [ 0.033854] DMA zone: 64 pages used for memmap
- [ 0.033855] DMA zone: 21 pages reserved
- [ 0.033855] DMA zone: 3991 pages, LIFO batch:0
- [ 0.033906] DMA32 zone: 12212 pages used for memmap
- [ 0.033906] DMA32 zone: 781552 pages, LIFO batch:63
- [ 0.048199] Normal zone: 53248 pages used for memmap
- [ 0.048200] Normal zone: 3407872 pages, LIFO batch:63
- [ 0.107771] ACPI: PM-Timer IO Port: 0x4008
- [ 0.107773] ACPI: Local APIC address 0xfee00000
- [ 0.107779] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.107779] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.107780] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.107780] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.107781] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
- [ 0.107782] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
- [ 0.107782] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
- [ 0.107783] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
- [ 0.107792] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
- [ 0.107794] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.107795] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.107796] ACPI: IRQ0 used by override.
- [ 0.107797] ACPI: IRQ9 used by override.
- [ 0.107799] Using ACPI (MADT) for SMP configuration information
- [ 0.107801] smpboot: Allowing 8 CPUs, 2 hotplug CPUs
- [ 0.107814] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.107815] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
- [ 0.107816] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
- [ 0.107816] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
- [ 0.107817] PM: Registered nosave memory: [mem 0xbfcf0000-0xbfcf0fff]
- [ 0.107818] PM: Registered nosave memory: [mem 0xbfcf1000-0xbfcfffff]
- [ 0.107818] PM: Registered nosave memory: [mem 0xbfd00000-0xbfdfffff]
- [ 0.107819] PM: Registered nosave memory: [mem 0xbfe00000-0xdfffffff]
- [ 0.107819] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- [ 0.107820] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
- [ 0.107820] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
- [ 0.107822] [mem 0xbfe00000-0xdfffffff] available for PCI devices
- [ 0.107823] Booting paravirtualized kernel on bare hardware
- [ 0.107826] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.192018] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
- [ 0.192833] percpu: Embedded 53 pages/cpu s176984 r8192 d31912 u262144
- [ 0.192838] pcpu-alloc: s176984 r8192 d31912 u262144 alloc=1*2097152
- [ 0.192839] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.192858] Built 1 zonelists, mobility grouping on. Total pages: 4127870
- [ 0.192859] Policy zone: Normal
- [ 0.192860] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-2-amd64 root=UUID=a16b4a41-f65c-4fed-aeec-ffb979951f94 ro quiet elevator=noop
- [ 0.206332] AGP: Checking aperture...
- [ 0.212345] AGP: No AGP bridge found
- [ 0.212347] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
- [ 0.212348] Aperture pointing to e820 RAM. Ignoring.
- [ 0.212348] AGP: Your BIOS doesn't leave an aperture memory hole
- [ 0.212349] AGP: Please enable the IOMMU option in the BIOS setup
- [ 0.212349] AGP: This costs you 64MB of RAM
- [ 0.212351] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
- [ 0.212354] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
- [ 0.302478] Memory: 16317952K/16773660K available (10243K kernel code, 1186K rwdata, 3516K rodata, 1640K init, 2168K bss, 455708K reserved, 0K cma-reserved)
- [ 0.302486] random: get_random_u64 called from __kmem_cache_create+0x44/0x530 with crng_init=0
- [ 0.302662] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.302679] ftrace: allocating 32784 entries in 129 pages
- [ 0.311697] rcu: Hierarchical RCU implementation.
- [ 0.311698] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
- [ 0.311700] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.311700] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.314739] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
- [ 0.315050] spurious 8259A interrupt: IRQ7.
- [ 0.318450] Console: colour VGA+ 80x25
- [ 0.318455] printk: console [tty0] enabled
- [ 0.318477] ACPI: Core revision 20190509
- [ 0.318574] APIC: Switch to symmetric I/O mode setup
- [ 0.319059] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.338566] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b6f1cf2101, max_idle_ns: 440795266236 ns
- [ 0.338571] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.47 BogoMIPS (lpj=12052944)
- [ 0.338573] pid_max: default: 32768 minimum: 301
- [ 0.338610] LSM: Security Framework initializing
- [ 0.338615] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.338638] AppArmor: AppArmor initialized
- [ 0.338639] TOMOYO Linux initialized
- [ 0.343940] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.346606] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.346721] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.346806] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.347104] LVT offset 0 assigned for vector 0xf9
- [ 0.347106] process: using AMD E400 aware idle routine
- [ 0.347108] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
- [ 0.347109] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
- [ 0.347110] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
- [ 0.347111] Spectre V2 : Mitigation: Full AMD retpoline
- [ 0.347112] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 0.347214] Freeing SMP alternatives memory: 24K
- [ 0.350578] process: System has AMD C1E enabled
- [ 0.354568] APIC calibration not consistent with PM-Timer: 98ms instead of 100ms
- [ 0.354568] APIC delta adjusted to PM-Timer: 1255557 (1239528)
- [ 0.354568] process: Switch to broadcast mode on CPU0
- [ 0.354574] smpboot: CPU0: AMD Phenom(tm) II X6 1075T Processor (family: 0x10, model: 0xa, stepping: 0x0)
- [ 0.354717] Performance Events: AMD PMU driver.
- [ 0.354721] ... version: 0
- [ 0.354721] ... bit width: 48
- [ 0.354722] ... generic registers: 4
- [ 0.354722] ... value mask: 0000ffffffffffff
- [ 0.354723] ... max period: 00007fffffffffff
- [ 0.354723] ... fixed-purpose events: 0
- [ 0.354723] ... event mask: 000000000000000f
- [ 0.354761] rcu: Hierarchical SRCU implementation.
- [ 0.355056] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.355134] smp: Bringing up secondary CPUs ...
- [ 0.355220] x86: Booting SMP configuration:
- [ 0.355220] .... node #0, CPUs: #1
- [ 0.003567] do_IRQ: 1.55 No irq handler for vector
- [ 0.003567] process: Switch to broadcast mode on CPU1
- [ 0.357772] #2
- [ 0.003567] do_IRQ: 2.55 No irq handler for vector
- [ 0.003567] process: Switch to broadcast mode on CPU2
- [ 0.358657] #3
- [ 0.003567] do_IRQ: 3.55 No irq handler for vector
- [ 0.003567] process: Switch to broadcast mode on CPU3
- [ 0.362658] #4
- [ 0.003567] do_IRQ: 4.55 No irq handler for vector
- [ 0.003567] process: Switch to broadcast mode on CPU4
- [ 0.365227] #5
- [ 0.003567] do_IRQ: 5.55 No irq handler for vector
- [ 0.003567] process: Switch to broadcast mode on CPU5
- [ 0.368834] smp: Brought up 1 node, 6 CPUs
- [ 0.368834] smpboot: Max logical packages: 2
- [ 0.368834] smpboot: Total of 6 processors activated (36158.83 BogoMIPS)
- [ 0.371387] devtmpfs: initialized
- [ 0.371387] x86/mm: Memory block size: 128MB
- [ 0.371798] PM: Registering ACPI NVS region [mem 0xbfcf0000-0xbfcf0fff] (4096 bytes)
- [ 0.371798] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.371798] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.371798] pinctrl core: initialized pinctrl subsystem
- [ 0.371798] NET: Registered protocol family 16
- [ 0.371798] audit: initializing netlink subsys (disabled)
- [ 0.371798] audit: type=2000 audit(1577997549.056:1): state=initialized audit_enabled=0 res=1
- [ 0.371798] cpuidle: using governor ladder
- [ 0.371798] cpuidle: using governor menu
- [ 0.371798] node 0 link 0: io port [a000, ffff]
- [ 0.371798] TOM: 00000000c0000000 aka 3072M
- [ 0.371798] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
- [ 0.371798] node 0 link 0: mmio [a0000, bffff]
- [ 0.371798] node 0 link 0: mmio [c0000000, dfffffff]
- [ 0.371798] node 0 link 0: mmio [f0000000, fe02ffff]
- [ 0.371798] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
- [ 0.371798] TOM2: 0000000440000000 aka 17408M
- [ 0.371798] bus: [bus 00-05] on node 0 link 0
- [ 0.371798] bus: 00 [io 0x0000-0xffff]
- [ 0.371798] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.371798] bus: 00 [mem 0xc0000000-0xdfffffff]
- [ 0.371798] bus: 00 [mem 0xe0600000-0xffffffff]
- [ 0.371798] bus: 00 [mem 0xe0100000-0xe05fffff]
- [ 0.371798] bus: 00 [mem 0x440000000-0xfcffffffff]
- [ 0.374645] ACPI: bus type PCI registered
- [ 0.374648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.374735] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.374738] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.374755] PCI: Using configuration type 1 for base access
- [ 0.375092] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.375092] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.375092] mtrr: corrected configuration.
- [ 0.375636] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.375636] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.542687] alg: No test for lzo-rle (lzo-rle-generic)
- [ 0.542687] alg: No test for lzo-rle (lzo-rle-scomp)
- [ 0.542687] ACPI: Added _OSI(Module Device)
- [ 0.542687] ACPI: Added _OSI(Processor Device)
- [ 0.542687] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.542687] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.542687] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.542687] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.542687] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
- [ 0.545082] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
- [ 0.545085] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
- [ 0.545097] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
- [ 0.545099] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
- [ 0.545124] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.545292] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.545329] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.545364] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.545399] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.545436] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.545470] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.545505] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.545539] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.545576] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.545611] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.545648] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.545686] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.545728] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.545768] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.545806] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.545846] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.545888] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.545927] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.545966] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.546610] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.546654] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.546694] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.546734] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.546774] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.546817] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.546857] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.546897] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.546941] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.546984] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.547023] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.547062] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.547101] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.547144] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.547183] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.547222] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.547261] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.547303] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-440)
- [ 0.547342] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-440)
- [ 0.547382] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-440)
- [ 0.547421] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-440)
- [ 0.549834] ACPI: Interpreter enabled
- [ 0.549854] ACPI: (supports S0 S3 S4 S5)
- [ 0.549856] ACPI: Using IOAPIC for interrupt routing
- [ 0.549879] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.549990] ACPI: Enabled 9 GPEs in block 00 to 1F
- [ 0.553306] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.553310] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
- [ 0.553502] PCI host bridge to bus 0000:00
- [ 0.553504] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.553505] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.553506] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.553507] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
- [ 0.553508] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
- [ 0.553509] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.553517] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
- [ 0.553527] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
- [ 0.553607] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
- [ 0.553623] pci 0000:00:02.0: enabling Extended Tags
- [ 0.553644] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.553712] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
- [ 0.553727] pci 0000:00:05.0: enabling Extended Tags
- [ 0.553746] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
- [ 0.553813] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
- [ 0.553828] pci 0000:00:0a.0: enabling Extended Tags
- [ 0.553848] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
- [ 0.553918] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
- [ 0.553934] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
- [ 0.553940] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
- [ 0.553947] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
- [ 0.553953] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
- [ 0.553959] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
- [ 0.553965] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
- [ 0.554057] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
- [ 0.554069] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
- [ 0.554168] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
- [ 0.554182] pci 0000:00:12.2: reg 0x10: [mem 0xfe02d000-0xfe02d0ff]
- [ 0.554238] pci 0000:00:12.2: supports D1 D2
- [ 0.554239] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.554306] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
- [ 0.554318] pci 0000:00:13.0: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
- [ 0.554422] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
- [ 0.554436] pci 0000:00:13.2: reg 0x10: [mem 0xfe02b000-0xfe02b0ff]
- [ 0.554492] pci 0000:00:13.2: supports D1 D2
- [ 0.554493] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.554644] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.554755] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
- [ 0.554773] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
- [ 0.554820] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.554889] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
- [ 0.554999] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.555084] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
- [ 0.555096] pci 0000:00:14.5: reg 0x10: [mem 0xfe02a000-0xfe02afff]
- [ 0.555196] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
- [ 0.555227] pci 0000:00:15.0: enabling Extended Tags
- [ 0.555260] pci 0000:00:15.0: supports D1 D2
- [ 0.555333] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
- [ 0.555345] pci 0000:00:16.0: reg 0x10: [mem 0xfe029000-0xfe029fff]
- [ 0.555442] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
- [ 0.555457] pci 0000:00:16.2: reg 0x10: [mem 0xfe028000-0xfe0280ff]
- [ 0.555512] pci 0000:00:16.2: supports D1 D2
- [ 0.555513] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.555578] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
- [ 0.555634] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
- [ 0.555688] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
- [ 0.555740] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
- [ 0.555796] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
- [ 0.555884] pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
- [ 0.555905] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.555913] pci 0000:01:00.0: reg 0x18: [mem 0xdfe00000-0xdfffffff 64bit pref]
- [ 0.555918] pci 0000:01:00.0: reg 0x20: [io 0xde00-0xdeff]
- [ 0.555924] pci 0000:01:00.0: reg 0x24: [mem 0xfde80000-0xfdebffff]
- [ 0.555929] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 0.555934] pci 0000:01:00.0: enabling Extended Tags
- [ 0.555986] pci 0000:01:00.0: supports D1 D2
- [ 0.555987] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.556018] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
- [ 0.556052] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
- [ 0.556069] pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit]
- [ 0.556096] pci 0000:01:00.1: enabling Extended Tags
- [ 0.556133] pci 0000:01:00.1: supports D1 D2
- [ 0.556202] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.556205] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- [ 0.556206] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
- [ 0.556208] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
- [ 0.556238] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
- [ 0.556258] pci 0000:02:00.0: reg 0x10: [mem 0xfdbfe000-0xfdbfffff 64bit]
- [ 0.556334] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 0.556401] pci 0000:00:05.0: PCI bridge to [bus 02]
- [ 0.556403] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
- [ 0.556404] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
- [ 0.556406] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
- [ 0.556437] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.556456] pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff]
- [ 0.556474] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
- [ 0.556486] pci 0000:03:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
- [ 0.556493] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 0.556553] pci 0000:03:00.0: supports D1 D2
- [ 0.556554] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.556629] pci 0000:00:0a.0: PCI bridge to [bus 03]
- [ 0.556631] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- [ 0.556632] pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
- [ 0.556634] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.556642] pci_bus 0000:04: extended config space not accessible
- [ 0.556668] pci 0000:04:06.0: [1412:1724] type 00 class 0x040100
- [ 0.556684] pci 0000:04:06.0: reg 0x10: [io 0xbf00-0xbf1f]
- [ 0.556693] pci 0000:04:06.0: reg 0x14: [io 0xbe00-0xbe7f]
- [ 0.556760] pci 0000:04:06.0: supports D2
- [ 0.556816] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
- [ 0.556818] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
- [ 0.556821] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
- [ 0.556823] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
- [ 0.556824] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
- [ 0.556825] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.556826] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 0.556827] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
- [ 0.556828] pci 0000:00:14.4: bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
- [ 0.556872] pci 0000:05:00.0: [197b:2363] type 00 class 0x010601
- [ 0.556960] pci 0000:05:00.0: reg 0x24: [mem 0xfdafe000-0xfdafffff]
- [ 0.556971] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.557025] pci 0000:05:00.0: PME# supported from D3hot
- [ 0.557087] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
- [ 0.557112] pci 0000:05:00.1: reg 0x10: [io 0xaf00-0xaf07]
- [ 0.557123] pci 0000:05:00.1: reg 0x14: [io 0xae00-0xae03]
- [ 0.557135] pci 0000:05:00.1: reg 0x18: [io 0xad00-0xad07]
- [ 0.557146] pci 0000:05:00.1: reg 0x1c: [io 0xac00-0xac03]
- [ 0.557157] pci 0000:05:00.1: reg 0x20: [io 0xab00-0xab0f]
- [ 0.557252] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.557259] pci 0000:00:15.0: PCI bridge to [bus 05]
- [ 0.557263] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
- [ 0.557265] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
- [ 0.557268] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
- [ 0.557466] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.557497] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.557527] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.557556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.557584] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.557613] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.557642] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.557671] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.558057] pci 0000:01:00.0: vgaarb: setting as boot VGA device
- [ 0.558057] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.558057] pci 0000:01:00.0: vgaarb: bridge control possible
- [ 0.558057] vgaarb: loaded
- [ 0.558057] EDAC MC: Ver: 3.0.0
- [ 0.558057] PCI: Using ACPI for IRQ routing
- [ 0.564453] PCI: pci_cache_line_size set to 64 bytes
- [ 0.564503] e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
- [ 0.564504] e820: reserve RAM buffer [mem 0xbfcf0000-0xbfffffff]
- [ 0.564701] clocksource: Switched to clocksource tsc-early
- [ 0.574393] VFS: Disk quotas dquot_6.6.0
- [ 0.574414] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.574549] AppArmor: AppArmor Filesystem Enabled
- [ 0.574574] pnp: PnP ACPI init
- [ 0.574714] system 00:00: [io 0x04d0-0x04d1] has been reserved
- [ 0.574715] system 00:00: [io 0x0220-0x0225] has been reserved
- [ 0.574717] system 00:00: [io 0x0290-0x0294] has been reserved
- [ 0.574722] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.574951] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
- [ 0.574954] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
- [ 0.574957] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
- [ 0.574979] system 00:01: [io 0x4100-0x411f] has been reserved
- [ 0.574980] system 00:01: [io 0x0228-0x022f] has been reserved
- [ 0.574981] system 00:01: [io 0x040b] has been reserved
- [ 0.574982] system 00:01: [io 0x04d6] has been reserved
- [ 0.574983] system 00:01: [io 0x0c00-0x0c01] has been reserved
- [ 0.574984] system 00:01: [io 0x0c14] has been reserved
- [ 0.574985] system 00:01: [io 0x0c50-0x0c52] has been reserved
- [ 0.574986] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
- [ 0.574987] system 00:01: [io 0x0c6f] has been reserved
- [ 0.574988] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.574989] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.574990] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
- [ 0.574991] system 00:01: [io 0x4000-0x40fe] has been reserved
- [ 0.574992] system 00:01: [io 0x4210-0x4217] has been reserved
- [ 0.574993] system 00:01: [io 0x0b00-0x0b0f] has been reserved
- [ 0.574994] system 00:01: [io 0x0b10-0x0b1f] has been reserved
- [ 0.574994] system 00:01: [io 0x0b20-0x0b3f] has been reserved
- [ 0.574996] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
- [ 0.574999] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.575113] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.575291] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.575294] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.575423] system 00:04: [mem 0x000d4200-0x000d7fff] has been reserved
- [ 0.575425] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved
- [ 0.575426] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.575427] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.575428] system 00:04: [mem 0xbfcf0000-0xbfcfffff] could not be reserved
- [ 0.575429] system 00:04: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.575430] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.575431] system 00:04: [mem 0x00100000-0xbfceffff] could not be reserved
- [ 0.575432] system 00:04: [mem 0xbfd00000-0xbfdfffff] has been reserved
- [ 0.575433] system 00:04: [mem 0xbfe00000-0xbfefffff] could not be reserved
- [ 0.575434] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.575435] system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved
- [ 0.575436] system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved
- [ 0.575439] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.575452] pnp: PnP ACPI: found 5 devices
- [ 0.581411] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.581428] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
- [ 0.581430] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.581432] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- [ 0.581435] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
- [ 0.581436] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
- [ 0.581439] pci 0000:00:05.0: PCI bridge to [bus 02]
- [ 0.581440] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
- [ 0.581441] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
- [ 0.581443] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
- [ 0.581445] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd700000-0xfd71ffff pref]
- [ 0.581446] pci 0000:00:0a.0: PCI bridge to [bus 03]
- [ 0.581448] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- [ 0.581449] pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
- [ 0.581450] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.581453] pci 0000:00:14.4: PCI bridge to [bus 04]
- [ 0.581455] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
- [ 0.581458] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
- [ 0.581460] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
- [ 0.581465] pci 0000:05:00.0: BAR 6: assigned [mem 0xfda00000-0xfda0ffff pref]
- [ 0.581466] pci 0000:00:15.0: PCI bridge to [bus 05]
- [ 0.581467] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
- [ 0.581470] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
- [ 0.581472] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
- [ 0.581476] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.581477] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.581478] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.581479] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
- [ 0.581480] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
- [ 0.581481] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.581482] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
- [ 0.581482] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
- [ 0.581483] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- [ 0.581484] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
- [ 0.581485] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
- [ 0.581486] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
- [ 0.581487] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff]
- [ 0.581488] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.581489] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
- [ 0.581490] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
- [ 0.581490] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
- [ 0.581491] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.581492] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
- [ 0.581493] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.581494] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
- [ 0.581495] pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff window]
- [ 0.581496] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
- [ 0.581496] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
- [ 0.581497] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
- [ 0.581559] NET: Registered protocol family 2
- [ 0.581710] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
- [ 0.581786] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.582146] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.582475] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.582547] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.582643] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.582776] NET: Registered protocol family 1
- [ 0.582780] NET: Registered protocol family 44
- [ 0.604692] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x643 took 21376 usecs
- [ 0.624703] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x643 took 19353 usecs
- [ 0.644695] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x643 took 19331 usecs
- [ 0.664698] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x643 took 19518 usecs
- [ 0.664894] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.665068] pci 0000:05:00.0: async suspend disabled to avoid multi-function power-on ordering issue
- [ 0.665071] pci 0000:05:00.1: async suspend disabled to avoid multi-function power-on ordering issue
- [ 0.665074] PCI: CLS 4 bytes, default 64
- [ 0.665120] Trying to unpack rootfs image as initramfs...
- [ 1.120942] Freeing initrd memory: 35608K
- [ 1.121368] PCI-DMA: Disabling AGP.
- [ 1.121482] PCI-DMA: aperture base @ b4000000 size 65536 KB
- [ 1.121483] PCI-DMA: using GART IOMMU.
- [ 1.121484] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 1.123665] LVT offset 1 assigned for vector 0x400
- [ 1.123675] LVT offset 1 assigned
- [ 1.123870] perf: AMD IBS detected (0x0000001f)
- [ 1.124556] Initialise system trusted keyrings
- [ 1.124562] Key type blacklist registered
- [ 1.124636] workingset: timestamp_bits=40 max_order=22 bucket_order=0
- [ 1.125942] zbud: loaded
- [ 1.126336] Platform Keyring initialized
- [ 1.126338] Key type asymmetric registered
- [ 1.126339] Asymmetric key parser 'x509' registered
- [ 1.126347] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 1.126417] io scheduler mq-deadline registered
- [ 1.127052] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 1.127069] ACPI: ACPI: processor limited to max C-state 1
- [ 1.127470] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.127798] Linux agpgart interface v0.103
- [ 1.127824] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 1.127824] AMD-Vi: AMD IOMMUv2 functionality not available on this system
- [ 1.128280] i8042: PNP: No PS/2 controller found.
- [ 1.128281] i8042: Probing ports directly.
- [ 1.161723] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
- [ 1.161724] i8042: If AUX port is really absent please use the 'i8042.noaux' option
- [ 1.252568] random: fast init done
- [ 1.396716] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.396837] mousedev: PS/2 mouse device common for all mice
- [ 1.396877] rtc_cmos 00:02: RTC can wake from S4
- [ 1.396986] rtc_cmos 00:02: registered as rtc0
- [ 1.397001] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
- [ 1.397110] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.397610] NET: Registered protocol family 10
- [ 1.407032] Segment Routing with IPv6
- [ 1.407052] mip6: Mobile IPv6
- [ 1.407054] NET: Registered protocol family 17
- [ 1.407095] mpls_gso: MPLS GSO support
- [ 1.407431] mce: Using 6 MCE banks
- [ 1.407439] microcode: microcode updated early to new patch_level=0x010000dc
- [ 1.407465] microcode: CPU0: patch_level=0x010000dc
- [ 1.407469] microcode: CPU1: patch_level=0x010000dc
- [ 1.407475] microcode: CPU2: patch_level=0x010000dc
- [ 1.407481] microcode: CPU3: patch_level=0x010000dc
- [ 1.407487] microcode: CPU4: patch_level=0x010000dc
- [ 1.407493] microcode: CPU5: patch_level=0x010000dc
- [ 1.407497] microcode: Microcode Update Driver: v2.2.
- [ 1.407505] sched_clock: Marking stable (1407845881, -432954)->(1929635960, -522223033)
- [ 1.407698] registered taskstats version 1
- [ 1.407699] Loading compiled-in X.509 certificates
- [ 1.447030] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
- [ 1.447045] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
- [ 1.447064] zswap: loaded using pool lzo/zbud
- [ 1.447166] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.447543] rtc_cmos 00:02: setting system clock to 2020-01-02T20:39:11 UTC (1577997551)
- [ 1.449809] Freeing unused kernel image memory: 1640K
- [ 1.466654] Write protecting the kernel read-only data: 16384k
- [ 1.467420] Freeing unused kernel image memory: 2036K
- [ 1.467700] Freeing unused kernel image memory: 580K
- [ 1.475829] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 1.475836] Run /init as init process
- [ 1.607036] SCSI subsystem initialized
- [ 1.607416] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 1.610157] ACPI: bus type USB registered
- [ 1.610180] usbcore: registered new interface driver usbfs
- [ 1.610188] usbcore: registered new interface driver hub
- [ 1.610231] usbcore: registered new device driver usb
- [ 1.613799] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.616130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.617082] ehci-pci: EHCI PCI platform driver
- [ 1.617545] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20190509/utaddress-213)
- [ 1.617551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 1.617733] QUIRK: Enable AMD PLL fix
- [ 1.617734] libata version 3.00 loaded.
- [ 1.617771] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 1.617782] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 1.617789] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.617798] ehci-pci 0000:00:12.2: debug port 1
- [ 1.617890] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02d000
- [ 1.618593] libphy: r8169: probed
- [ 1.619049] r8169 0000:03:00.0 eth0: RTL8168d/8111d, 1c:6f:65:34:24:7e, XID 283, IRQ 28
- [ 1.619051] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 1.621346] scsi host0: pata_jmicron
- [ 1.621881] scsi host1: pata_jmicron
- [ 1.621934] ata1: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
- [ 1.621935] ata2: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
- [ 1.626622] ahci 0000:00:11.0: version 3.0
- [ 1.626978] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- [ 1.626980] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 1.627696] scsi host2: ahci
- [ 1.627845] scsi host3: ahci
- [ 1.627975] scsi host4: ahci
- [ 1.630585] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 1.630637] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
- [ 1.630638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.630640] usb usb1: Product: EHCI Host Controller
- [ 1.630641] usb usb1: Manufacturer: Linux 5.2.0-2-amd64 ehci_hcd
- [ 1.630642] usb usb1: SerialNumber: 0000:00:12.2
- [ 1.630757] hub 1-0:1.0: USB hub found
- [ 1.630763] hub 1-0:1.0: 5 ports detected
- [ 1.630927] xhci_hcd 0000:02:00.0: xHCI Host Controller
- [ 1.630932] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
- [ 1.631030] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
- [ 1.631358] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
- [ 1.631360] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.631361] usb usb2: Product: xHCI Host Controller
- [ 1.631362] usb usb2: Manufacturer: Linux 5.2.0-2-amd64 xhci-hcd
- [ 1.631363] usb usb2: SerialNumber: 0000:02:00.0
- [ 1.631416] scsi host5: ahci
- [ 1.631478] hub 2-0:1.0: USB hub found
- [ 1.631485] hub 2-0:1.0: 2 ports detected
- [ 1.631571] xhci_hcd 0000:02:00.0: xHCI Host Controller
- [ 1.631579] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
- [ 1.631581] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
- [ 1.634406] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 1.634417] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.634432] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
- [ 1.634433] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.634433] usb usb3: Product: xHCI Host Controller
- [ 1.634434] usb usb3: Manufacturer: Linux 5.2.0-2-amd64 xhci-hcd
- [ 1.634435] usb usb3: SerialNumber: 0000:02:00.0
- [ 1.634646] hub 3-0:1.0: USB hub found
- [ 1.634656] hub 3-0:1.0: 2 ports detected
- [ 1.634750] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
- [ 1.634753] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.634760] ehci-pci 0000:00:13.2: debug port 1
- [ 1.634789] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe02b000
- [ 1.634842] scsi host6: ahci
- [ 1.634995] scsi host7: ahci
- [ 1.635091] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 29
- [ 1.635093] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 29
- [ 1.635095] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 29
- [ 1.635096] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 29
- [ 1.635098] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 29
- [ 1.635099] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 29
- [ 1.645410] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 1.645413] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 1.645735] scsi host8: ahci
- [ 1.645865] scsi host9: ahci
- [ 1.645943] ata9: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17
- [ 1.645946] ata10: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17
- [ 1.654662] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 1.654712] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
- [ 1.654714] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.654715] usb usb4: Product: EHCI Host Controller
- [ 1.654716] usb usb4: Manufacturer: Linux 5.2.0-2-amd64 ehci_hcd
- [ 1.654717] usb usb4: SerialNumber: 0000:00:13.2
- [ 1.654831] hub 4-0:1.0: USB hub found
- [ 1.654836] hub 4-0:1.0: 5 ports detected
- [ 1.655156] ehci-pci 0000:00:16.2: EHCI Host Controller
- [ 1.655161] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
- [ 1.655164] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.655171] ehci-pci 0000:00:16.2: debug port 1
- [ 1.655202] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe028000
- [ 1.670654] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 1.670694] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
- [ 1.670696] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.670697] usb usb5: Product: EHCI Host Controller
- [ 1.670697] usb usb5: Manufacturer: Linux 5.2.0-2-amd64 ehci_hcd
- [ 1.670698] usb usb5: SerialNumber: 0000:00:16.2
- [ 1.670800] hub 5-0:1.0: USB hub found
- [ 1.670805] hub 5-0:1.0: 4 ports detected
- [ 1.671849] ohci-pci: OHCI PCI platform driver
- [ 1.672573] ohci-pci 0000:00:12.0: OHCI PCI host controller
- [ 1.672580] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
- [ 1.672619] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe02e000
- [ 1.734673] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
- [ 1.734675] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.734676] usb usb6: Product: OHCI PCI host controller
- [ 1.734677] usb usb6: Manufacturer: Linux 5.2.0-2-amd64 ohci_hcd
- [ 1.734677] usb usb6: SerialNumber: 0000:00:12.0
- [ 1.734844] hub 6-0:1.0: USB hub found
- [ 1.734850] hub 6-0:1.0: 5 ports detected
- [ 1.735104] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 1.735108] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
- [ 1.735125] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02c000
- [ 1.798670] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
- [ 1.798671] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.798672] usb usb7: Product: OHCI PCI host controller
- [ 1.798673] usb usb7: Manufacturer: Linux 5.2.0-2-amd64 ohci_hcd
- [ 1.798673] usb usb7: SerialNumber: 0000:00:13.0
- [ 1.798781] hub 7-0:1.0: USB hub found
- [ 1.798787] hub 7-0:1.0: 5 ports detected
- [ 1.799023] ohci-pci 0000:00:14.5: OHCI PCI host controller
- [ 1.799027] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
- [ 1.799044] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe02a000
- [ 1.862658] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
- [ 1.862659] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.862660] usb usb8: Product: OHCI PCI host controller
- [ 1.862661] usb usb8: Manufacturer: Linux 5.2.0-2-amd64 ohci_hcd
- [ 1.862661] usb usb8: SerialNumber: 0000:00:14.5
- [ 1.862804] hub 8-0:1.0: USB hub found
- [ 1.862812] hub 8-0:1.0: 2 ports detected
- [ 1.863029] ohci-pci 0000:00:16.0: OHCI PCI host controller
- [ 1.863034] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
- [ 1.863051] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe029000
- [ 1.926673] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
- [ 1.926675] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.926676] usb usb9: Product: OHCI PCI host controller
- [ 1.926676] usb usb9: Manufacturer: Linux 5.2.0-2-amd64 ohci_hcd
- [ 1.926677] usb usb9: SerialNumber: 0000:00:16.0
- [ 1.926786] hub 9-0:1.0: USB hub found
- [ 1.926792] hub 9-0:1.0: 4 ports detected
- [ 1.950173] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.950218] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.950262] ata7: SATA link down (SStatus 0 SControl 300)
- [ 1.960466] ata10: SATA link down (SStatus 0 SControl 300)
- [ 1.960502] ata9: SATA link down (SStatus 0 SControl 300)
- [ 2.110657] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.110679] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.110698] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.111209] ata8.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
- [ 2.111210] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 2.111841] ata8.00: configured for UDMA/133
- [ 2.112224] ata3.00: supports DRM functions and may not be fully accessible
- [ 2.112919] ata3.00: disabling queued TRIM support
- [ 2.112921] ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT03B6Q, max UDMA/133
- [ 2.112922] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
- [ 2.114812] ata3.00: supports DRM functions and may not be fully accessible
- [ 2.115449] ata3.00: disabling queued TRIM support
- [ 2.117116] ata3.00: configured for UDMA/133
- [ 2.117346] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
- [ 2.120257] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
- [ 2.120286] sd 2:0:0:0: [sda] Write Protect is off
- [ 2.120288] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.120316] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.120905] sda: sda1 sda2 sda3
- [ 2.121616] sd 2:0:0:0: [sda] supports TCG Opal
- [ 2.121617] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 2.125783] ata4.00: ATA-8: Hitachi HDE721010SLA330, ST6OA3AA, max UDMA/133
- [ 2.125785] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 2.126912] ata4.00: configured for UDMA/133
- [ 2.127059] scsi 3:0:0:0: Direct-Access ATA Hitachi HDE72101 A3AA PQ: 0 ANSI: 5
- [ 2.127285] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 2.127295] sd 3:0:0:0: [sdb] Write Protect is off
- [ 2.127296] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.127331] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.127444] scsi 7:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
- [ 2.127642] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 2.127643] sd 7:0:0:0: [sdc] 4096-byte physical blocks
- [ 2.127649] sd 7:0:0:0: [sdc] Write Protect is off
- [ 2.127650] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 2.127661] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.138662] tsc: Refined TSC clocksource calibration: 3013.335 MHz
- [ 2.138673] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b6f7a72037, max_idle_ns: 440795245402 ns
- [ 2.138700] clocksource: Switched to clocksource tsc
- [ 2.141484] sdb: sdb1 sdb4
- [ 2.141898] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 2.180208] sdc: sdc1
- [ 2.180503] sd 7:0:0:0: [sdc] Attached SCSI disk
- [ 2.194636] usb 6-1: new low-speed USB device number 2 using ohci-pci
- [ 2.290641] usb 7-1: new full-speed USB device number 2 using ohci-pci
- [ 2.421733] usb 6-1: New USB device found, idVendor=046d, idProduct=c24b, bcdDevice=73.20
- [ 2.421735] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.421737] usb 6-1: Product: Gaming Keyboard G103
- [ 2.421737] usb 6-1: Manufacturer: Logitech
- [ 2.433879] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.450885] usbcore: registered new interface driver usbhid
- [ 2.450886] usbhid: USB HID core driver
- [ 2.452242] input: Logitech Gaming Keyboard G103 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:046D:C24B.0001/input/input1
- [ 2.492733] usb 7-1: New USB device found, idVendor=04b4, idProduct=121f, bcdDevice= 1.00
- [ 2.492734] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.492736] usb 7-1: Product: Ikari Laser
- [ 2.492737] usb 7-1: Manufacturer: SteelSeries ApS
- [ 2.502734] input: SteelSeries ApS Ikari Laser Mouse as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:04B4:121F.0003/input/input2
- [ 2.510779] hid-generic 0003:046D:C24B.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Gaming Keyboard G103] on usb-0000:00:12.0-1/input0
- [ 2.510810] input: SteelSeries ApS Ikari Laser as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:04B4:121F.0003/input/input3
- [ 2.511007] input: Logitech Gaming Keyboard G103 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:046D:C24B.0002/input/input4
- [ 2.570738] hid-generic 0003:04B4:121F.0003: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SteelSeries ApS Ikari Laser] on usb-0000:00:13.0-1/input0
- [ 2.577771] input: SteelSeries ApS Ikari Laser Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/0003:04B4:121F.0004/input/input6
- [ 2.630742] hid-generic 0003:046D:C24B.0002: input,hiddev1,hidraw2: USB HID v1.10 Device [Logitech Gaming Keyboard G103] on usb-0000:00:12.0-1/input1
- [ 2.690767] input: SteelSeries ApS Ikari Laser as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/0003:04B4:121F.0004/input/input7
- [ 2.690832] hid-generic 0003:04B4:121F.0004: input,hiddev2,hidraw3: USB HID v1.11 Keyboard [SteelSeries ApS Ikari Laser] on usb-0000:00:13.0-1/input1
- [ 2.906643] usb 6-2: new low-speed USB device number 3 using ohci-pci
- [ 3.103738] usb 6-2: New USB device found, idVendor=046d, idProduct=c408, bcdDevice=14.00
- [ 3.103739] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.103740] usb 6-2: Product: USB Trackball
- [ 3.103741] usb 6-2: Manufacturer: Logitech
- [ 3.112018] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:046D:C408.0005/input/input8
- [ 3.112090] hid-generic 0003:046D:C408.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:12.0-2/input0
- [ 3.243136] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.281753] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
- [ 3.368518] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
- [ 3.382968] systemd[1]: Inserted module 'autofs4'
- [ 3.399730] systemd[1]: systemd 243-8 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 3.418693] systemd[1]: Detected architecture x86-64.
- [ 3.421329] systemd[1]: Set hostname to <debian>.
- [ 3.478758] random: lvmconfig: uninitialized urandom read (4 bytes read)
- [ 3.483375] lvm2-activation-generator: lvmconfig failed
- [ 3.483415] lvm2-activation-generator: Activation generator failed.
- [ 3.494637] usb 1-5: new high-speed USB device number 4 using ehci-pci
- [ 3.508244] systemd[274]: /lib/systemd/system-generators/lvm2-activation-generator failed with exit status 1.
- [ 3.545981] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket /run/samba/smbd.pid; please update the unit file accordingly.
- [ 3.570344] systemd[1]: /lib/systemd/system/nmbd.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid /run/pcscd/pcscd.comm; please update the unit file accordingly.
- [ 3.604434] random: systemd: uninitialized urandom read (16 bytes read)
- [ 3.605538] systemd[1]: Created slice system-getty.slice.
- [ 3.605571] random: systemd: uninitialized urandom read (16 bytes read)
- [ 3.605747] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 3.635497] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 3.642118] lp: driver loaded but no devices found
- [ 3.645725] RPC: Registered named UNIX socket transport module.
- [ 3.645726] RPC: Registered udp transport module.
- [ 3.645727] RPC: Registered tcp transport module.
- [ 3.645727] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 3.647307] ppdev: user-space parallel port driver
- [ 3.661293] usb 1-5: New USB device found, idVendor=05e3, idProduct=0732, bcdDevice= 5.70
- [ 3.661295] usb 1-5: New USB device strings: Mfr=3, Product=4, SerialNumber=5
- [ 3.661296] usb 1-5: Product: USB3 Reader
- [ 3.661297] usb 1-5: Manufacturer: Genesys
- [ 3.661298] usb 1-5: SerialNumber: 00000000570
- [ 3.661779] it87: Found IT8720F chip at 0x228, revision 8
- [ 3.661800] it87: Routing internal VCCH5V to in7
- [ 3.661803] it87: Beeping is supported
- [ 3.666020] device-mapper: uevent: version 1.0.3
- [ 3.666241] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
- [ 3.788768] acpi_cpufreq: overriding BIOS provided _PSD data
- [ 3.794416] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
- [ 3.794428] ACPI: Power Button [PWRB]
- [ 3.794493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
- [ 3.794505] ACPI: Power Button [PWRF]
- [ 3.821756] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 3.822001] sd 3:0:0:0: Attached scsi generic sg1 type 0
- [ 3.822048] sd 7:0:0:0: Attached scsi generic sg2 type 0
- [ 3.840792] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
- [ 3.840883] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
- [ 3.849276] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
- [ 3.882328] input: PC Speaker as /devices/platform/pcspkr/input/input11
- [ 3.901329] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
- [ 3.901331] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
- [ 3.903758] random: crng init done
- [ 3.903760] random: 7 urandom warning(s) missed due to ratelimiting
- [ 3.953889] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
- [ 3.953891] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 3.953892] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 3.953893] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 3.953894] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
- [ 3.953895] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 3.953896] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
- [ 3.953897] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
- [ 3.953898] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
- [ 3.953899] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f
- [ 3.959589] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
- [ 3.959617] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
- [ 3.959643] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
- [ 3.959666] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
- [ 3.959691] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
- [ 3.959715] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
- [ 4.006256] snd_ice1724 0000:04:06.0: juli@: analog I/O detected
- [ 4.018864] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
- [ 4.019702] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
- [ 4.019760] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
- [ 4.019815] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
- [ 4.019864] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
- [ 4.019912] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
- [ 4.019956] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input24
- [ 4.020004] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input25
- [ 4.039510] kvm: Nested Virtualization enabled
- [ 4.039514] kvm: Nested Paging enabled
- [ 4.042653] MCE: In-kernel MCE decoding enabled.
- [ 4.044966] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 4.044968] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 4.079610] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.079848] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 4.079850] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 4.080146] [drm] amdgpu kernel modesetting enabled.
- [ 4.080574] CRAT table not found
- [ 4.080578] Virtual CRAT table created for CPU
- [ 4.080580] Parsing CRAT table with 1 nodes
- [ 4.080583] Creating topology SYSFS entries
- [ 4.080601] Topology: Add CPU node
- [ 4.080602] Finished initializing topology
- [ 4.117093] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xc0000000 -> 0xcfffffff
- [ 4.117097] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xdfe00000 -> 0xdfffffff
- [ 4.117099] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfde80000 -> 0xfdebffff
- [ 4.117101] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
- [ 4.118286] Console: switching to colour dummy device 80x25
- [ 4.119912] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x341A 0xEF).
- [ 4.119932] [drm] register mmio base: 0xFDE80000
- [ 4.119933] [drm] register mmio size: 262144
- [ 4.119942] [drm] add ip block number 0 <vi_common>
- [ 4.119943] [drm] add ip block number 1 <gmc_v8_0>
- [ 4.119944] [drm] add ip block number 2 <tonga_ih>
- [ 4.119945] [drm] add ip block number 3 <gfx_v8_0>
- [ 4.119946] [drm] add ip block number 4 <sdma_v3_0>
- [ 4.119947] [drm] add ip block number 5 <powerplay>
- [ 4.119947] [drm] add ip block number 6 <dm>
- [ 4.119948] [drm] add ip block number 7 <uvd_v6_0>
- [ 4.119949] [drm] add ip block number 8 <vce_v3_0>
- [ 4.119954] kfd kfd: skipped device 1002:67df, PCI rejects atomics
- [ 4.119965] [drm] UVD is enabled in VM mode
- [ 4.119965] [drm] UVD ENC is enabled in VM mode
- [ 4.119967] [drm] VCE enabled in VM mode
- [ 4.120155] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:04 [mem 0x000d4200-0x000d7fff]
- [ 4.120165] caller pci_map_rom+0x6a/0x17d mapping multiple BARs
- [ 4.120167] amdgpu 0000:01:00.0: No more image in the PCI ROM
- [ 4.120731] ATOM BIOS: 113-V34121-X3
- [ 4.120785] [drm] RAS INFO: ras initialized successfully, hardware ability[0] ras_mask[0]
- [ 4.120792] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
- [ 4.123569] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin
- [ 4.123585] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
- [ 4.123587] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
- [ 4.123600] [drm] Detected VRAM RAM=4096M, BAR=256M
- [ 4.123601] [drm] RAM width 256bits GDDR5
- [ 4.123695] [TTM] Zone kernel: Available graphics memory: 8211880 KiB
- [ 4.123696] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
- [ 4.123697] [TTM] Initializing pool allocator
- [ 4.123702] [TTM] Initializing DMA pool allocator
- [ 4.123756] [drm] amdgpu: 4096M of VRAM memory ready
- [ 4.123759] [drm] amdgpu: 4096M of GTT memory ready.
- [ 4.123789] [drm] GART: num cpu pages 65536, num gpu pages 65536
- [ 4.124153] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
- [ 4.126473] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin
- [ 4.126866] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin
- [ 4.127041] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin
- [ 4.127043] [drm] Chained IB support enabled!
- [ 4.127262] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin
- [ 4.128184] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin
- [ 4.129265] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin
- [ 4.131318] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin
- [ 4.131556] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin
- [ 4.132886] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin
- [ 4.132892] [drm] Found UVD firmware Version: 1.79 Family ID: 16
- [ 4.132906] [drm] UVD ENC is disabled
- [ 4.134801] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin
- [ 4.134807] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
- [ 4.135351] usb-storage 1-5:1.0: USB Mass Storage device detected
- [ 4.135604] scsi host10: usb-storage 1-5:1.0
- [ 4.135661] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 4.135663] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 4.135750] usbcore: registered new interface driver usb-storage
- [ 4.136816] amdgpu 0000:01:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin
- [ 4.138315] usbcore: registered new interface driver uas
- [ 4.196785] [drm] DM_PPLIB: values for Engine clock
- [ 4.196787] [drm] DM_PPLIB: 300000
- [ 4.196788] [drm] DM_PPLIB: 588000
- [ 4.196788] [drm] DM_PPLIB: 971000
- [ 4.196789] [drm] DM_PPLIB: 1061000
- [ 4.196789] [drm] DM_PPLIB: 1128000
- [ 4.196790] [drm] DM_PPLIB: 1191000
- [ 4.196790] [drm] DM_PPLIB: 1233000
- [ 4.196790] [drm] DM_PPLIB: 1268000
- [ 4.196791] [drm] DM_PPLIB: Validation clocks:
- [ 4.196792] [drm] DM_PPLIB: engine_max_clock: 126800
- [ 4.196793] [drm] DM_PPLIB: memory_max_clock: 175000
- [ 4.196793] [drm] DM_PPLIB: level : 8
- [ 4.196795] [drm] DM_PPLIB: values for Memory clock
- [ 4.196795] [drm] DM_PPLIB: 300000
- [ 4.196795] [drm] DM_PPLIB: 1000000
- [ 4.196796] [drm] DM_PPLIB: 1750000
- [ 4.196796] [drm] DM_PPLIB: Validation clocks:
- [ 4.196797] [drm] DM_PPLIB: engine_max_clock: 126800
- [ 4.196797] [drm] DM_PPLIB: memory_max_clock: 175000
- [ 4.196798] [drm] DM_PPLIB: level : 8
- [ 4.197292] [drm] Display Core initialized with v3.2.27!
- [ 4.210600] [drm] SADs count is: -2, don't need to read it
- [ 4.211119] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 4.211120] [drm] Driver supports precise vblank timestamp query.
- [ 4.233736] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 4.233738] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 4.254298] systemd-journald[307]: Received client request to flush runtime journal.
- [ 4.260306] [drm] UVD initialized successfully.
- [ 4.360278] [drm] VCE initialized successfully.
- [ 4.362076] [drm] fb mappable at 0xC0CB8000
- [ 4.362077] [drm] vram apper at 0xC0000000
- [ 4.362077] [drm] size 8294400
- [ 4.362078] [drm] fb depth is 24
- [ 4.362078] [drm] pitch is 7680
- [ 4.362203] fbcon: amdgpudrmfb (fb0) is primary device
- [ 4.375231] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 4.375232] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 4.399451] Console: switching to colour frame buffer device 240x67
- [ 4.435903] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
- [ 4.451486] [drm] Initialized amdgpu 3.32.0 20150101 for 0000:01:00.0 on minor 0
- [ 4.451805] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 4.451809] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 4.873582] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.897030] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.944316] audit: type=1400 audit(1577986754.992:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=674 comm="apparmor_parser"
- [ 4.944643] audit: type=1400 audit(1577986754.992:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=676 comm="apparmor_parser"
- [ 4.944742] audit: type=1400 audit(1577986754.992:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=677 comm="apparmor_parser"
- [ 4.944753] audit: type=1400 audit(1577986754.992:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=677 comm="apparmor_parser"
- [ 4.945903] audit: type=1400 audit(1577986754.992:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=673 comm="apparmor_parser"
- [ 4.945914] audit: type=1400 audit(1577986754.992:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=673 comm="apparmor_parser"
- [ 4.945921] audit: type=1400 audit(1577986754.992:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=673 comm="apparmor_parser"
- [ 4.948551] audit: type=1400 audit(1577986754.996:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=682 comm="apparmor_parser"
- [ 4.949748] audit: type=1400 audit(1577986754.996:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=683 comm="apparmor_parser"
- [ 5.147811] scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 0570 PQ: 0 ANSI: 6
- [ 5.148543] scsi 10:0:0:1: Direct-Access Generic STORAGE DEVICE 0570 PQ: 0 ANSI: 6
- [ 5.149290] scsi 10:0:0:2: Direct-Access Generic STORAGE DEVICE 0570 PQ: 0 ANSI: 6
- [ 5.150040] scsi 10:0:0:3: Direct-Access Generic STORAGE DEVICE 0570 PQ: 0 ANSI: 6
- [ 5.150779] scsi 10:0:0:4: Direct-Access Generic STORAGE DEVICE 0570 PQ: 0 ANSI: 6
- [ 5.151521] sd 10:0:0:0: Attached scsi generic sg3 type 0
- [ 5.152032] sd 10:0:0:1: Attached scsi generic sg4 type 0
- [ 5.152467] sd 10:0:0:2: Attached scsi generic sg5 type 0
- [ 5.152918] sd 10:0:0:3: Attached scsi generic sg6 type 0
- [ 5.153368] sd 10:0:0:4: Attached scsi generic sg7 type 0
- [ 5.175727] sd 10:0:0:0: [sdd] Attached SCSI removable disk
- [ 5.176981] sd 10:0:0:4: [sdh] Attached SCSI removable disk
- [ 5.180731] sd 10:0:0:3: [sdg] Attached SCSI removable disk
- [ 5.181974] sd 10:0:0:2: [sdf] Attached SCSI removable disk
- [ 5.184481] sd 10:0:0:1: [sde] Attached SCSI removable disk
- [ 5.471041] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input26
- [ 5.729953] vboxdrv: loading out-of-tree module taints kernel.
- [ 5.730527] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
- [ 5.740643] vboxdrv: Found 6 processor cores
- [ 5.762871] vboxdrv: TSC mode is Invariant, tentative frequency 3013332770 Hz
- [ 5.762874] vboxdrv: Successfully loaded version 6.1.0 (interface 0x002d0001)
- [ 5.982133] VBoxNetFlt: Successfully started.
- [ 5.987371] VBoxNetAdp: Successfully started.
- [ 6.227330] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168d-2.fw
- [ 6.227753] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
- [ 6.375725] r8169 0000:03:00.0 eth0: Link is Down
- [ 8.937228] fuse: init (API version 7.31)
- [ 9.142426] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 9.142444] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 9.298116] Guest personality initialized and is inactive
- [ 9.298184] VMCI host device registered (name=vmci, major=10, minor=54)
- [ 9.298185] Initialized host personality
- [ 9.351848] NET: Registered protocol family 40
- [ 14.531763] FS-Cache: Loaded
- [ 14.566217] FS-Cache: Netfs 'nfs' registered for caching
- [ 14.579520] Key type dns_resolver registered
- [ 14.743909] NFS: Registering the id_resolver key type
- [ 14.743941] Key type id_resolver registered
- [ 14.743943] Key type id_legacy registered
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement