Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DefinitionBlock ("", "SSDT", 2, "ACDT", "AMDGPU", 0x00001000)
- {
- External (_SB_.PCI0, DeviceObj)
- External (_SB_.PCI0.GFX0, DeviceObj)
- External (_SB_.PCI0.PEG0, DeviceObj)
- External (_SB_.PCI0.PEG0.PEGP, DeviceObj)
- Scope (\_SB.PCI0)
- {
- // Follow your motherboard structure regarding the scope hierarchy. This example contains:
- // PEG0 -> PEGP (GPU #1) and HDAU (HDMI audio for GPU #1)
- // PEG1 -> PEGP (GPU #2) not installed
- // PEG2 -> PEGP (GPU #3) not installed
- // PEG3 -> PEGP (GPU #4) not installed
- // IMEI (Intel IMEI device required for proper hardware video decoding functioning)
- // GFX0 (disabled original IGPU name)
- // IGPU (Intel GPU with a connector-less frame used for hardware video decoding)
- //
- // Depending on your method you may rename PEGP to GFX0.
- Scope (PEG0)
- {
- Scope (PEGP)
- {
- Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
- {
- Store (Package ()
- {
- // Write the preferred GPU index here (1-4)
- "AAPL,slot-name",
- Buffer ()
- {
- "Slot-1"
- },
- // Write the main main monitor index (currently 0) here, the value does not matter
- "@0,AAPL,boot-display",
- Buffer (Zero) {},
- /*
- // Only use this if your GPU device identifier is not natively supported in macOS kexts
- "device-id",
- Buffer (0x04)
- {
- 0x12, 0x34, 0x00, 0x00
- },
- // Only use this if automatic detection fails or you are faking your GPU device-id
- "model",
- Buffer ()
- {
- "AMD Radeon HD 6450"
- },
- // Only use this if you are not satisfied with automatic HDMI injection
- // Make sure not to write the same onboard index for each installed GPU
- "hda-gfx",
- Buffer ()
- {
- "onboard-1"
- },
- // Only use this if you need special connectors that are incompatible with the automatic connector detection
- "connectors",
- Buffer ()
- {
- 0x00, 0x04, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x12, 0x04, 0x04, 0x01,
- 0x00, 0x08, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00, 0x01, 0x02, 0x00, 0x22, 0x05, 0x01, 0x03,
- 0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x03, 0x00, 0x10, 0x00, 0x05, 0x06,
- 0x04, 0x00, 0x00, 0x00, 0x14, 0x02, 0x00, 0x00, 0x00, 0x01, 0x04, 0x00, 0x11, 0x02, 0x06, 0x05
- },
- // You may only specify this with connectors property when the amount of connectors differs from autodetected
- "connector-count",
- Buffer ()
- {
- 0x04, 0x00, 0x00, 0x00
- },
- */
- // Only use this with automatic connector detection when you need manual priority.
- // Each value is a sense id to get a higher priority.
- // Automatic ordering is done by type: LVDS, DVI, HDMI, DP, VGA.
- // You may leave this empty to order all the connectors by type.
- // Assume autodetected connectors: 0x03 DP, 0x02 DVI_D, 0x06 HDMI, 0x05 DVI_D, 0x04 VGA
- // With the value pri will become: 0x0005 , 0x0001 , 0x0004 , 0x0003 , 0x0002
- "connector-priority",
- Buffer ()
- {
- 0x03, 0x06
- }
- /*
- // The properties below allow you to configure aty_config, aty_properties, cail_properties
- // This will change CAIL_DisableDrmdmaPowerGating in cail_properties to false
- // Note: buffer of 1 byte long with 0x01 / 0x00 values is transormed into boolean
- "CAIL,CAIL_DisableDrmdmaPowerGating",
- Buffer ()
- {
- 0x01
- },
- // This will change CFG_FB_LIMIT in aty_config to 6
- // Starting with 10.13.2 AAPL hardcodes framebuffer limit in certain kexts.
- // In particular, for AMD9500Controller the value is 6.
- // This is not correct for some GPUs (e.g. Radeon Pro, which has 3), so you are to specify
- // the correct value right here.
- "CFG,CFG_FB_LIMIT",
- 0x06,
- // This will change HELLO_WORLD in aty_properties to <01 02 03 04>
- "PP,HELLO_WORLD",
- Buffer ()
- {
- 0x01, 0x02, 0x03, 0x04
- }
- // The properties below are usually relevant to mobile ATI/AMD GPUs
- // Most mobile GPUs fail to provide their VBIOS
- // Dump it and inject it here.
- // You must cut or pad it by 64 KB (GOP is not relevant).
- "ATY,bin_image",
- Buffer (0x00010000)
- {
- // Put your VBIOS here (you could extract it with Linux or Windows)
- },
- // Works as AAPL%02X,override-no-connect, where %02X is display index e.g. 00
- "AAPL00,override-no-connect",
- Buffer (0x80)
- {
- // Put your EDID here (you could extract it with Linux or Windows)
- // Note that in some cases the extracted EDID may not be compatible and
- // as a result you may see visual glitches.
- // After you got at least something to show you could use edid-fix.sh script
- // (based on pokenguyen's work) to generate a compatible EDID.
- },
- // Just like AAPL00, @0 represents your display index (from the connectors).
- // From there on only @X notation could be used for displays other than 0.
- // I.e. AAPL01,override-no-connect is OK but AAPL01,DualLink is NOT.
- // Equal to AAPL00,DualLink, only supported for LVDS displays.
- // Required bandwidth speed is calculated as follows:
- // BITS_PER_PIXEL * WIDTH * HEIGHT * FREQUENCY / (1024 * 1024) = N Mbps/s
- // It depends on hardware but you could commonly assume 800 Mbit/s per link
- // If calculated N is above this value, you may require the property below.
- "@0,display-dual-link",
- Buffer ()
- {
- 0x01, 0x00, 0x00, 0x00
- },
- // Equal to AAPL00,LinkFormat = 0 (0 - 6 bits, 1 - 8 bits)
- // Most laptop displays do not support 24-bit (32) colour but only 18-bit.
- // This property must be used if you see "gradient" glitches.
- "@0,display-link-component-bits",
- Buffer () {
- 0x06, 0x00, 0x00, 0x00
- },
- // Equal to AAPL00,PixelFormat = 0 (0 - 6 bits, 1 - 8 bits)
- // Similar to display-link-component-bits
- "@0,display-pixel-component-bits",
- Buffer ()
- {
- 0x06, 0x00, 0x00, 0x00
- },
- // Equal to AAPL00,Dither
- // In general you should avoid this property, since it most likely will decrease
- // visual quality. However, on some displays you may get slightly better picture
- // with this property set to 1.
- "@0,display-dither-support",
- Buffer ()
- {
- 0x01, 0x00, 0x00, 0x00
- }
- */
- }, Local0)
- DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
- Return (Local0)
- }
- }
- /*
- // Only use this if you are not satisfied with automatic HDMI injection
- Device (HDAU)
- {
- Name (_ADR, One) // _ADR: Address
- Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
- {
- If (LEqual (Arg2, Zero))
- {
- Return (Buffer (One)
- {
- 0x03
- })
- }
- Return (Package ()
- {
- // layout-id should be defined, though the value is unused
- "layout-id",
- Buffer (0x04)
- {
- 0x01, 0x00, 0x00, 0x00
- },
- "hda-gfx",
- Buffer ()
- {
- "onboard-1"
- }
- })
- }
- }
- */
- }
- // Below goes an example for IGPU injection useful for enabling hardware video decoding and other stuff.
- Device (IMEI)
- {
- Name (_ADR, 0x00160000) // _ADR: Address
- }
- Scope (GFX0)
- {
- Name (_STA, Zero) // _STA: Status
- }
- Device (IGPU)
- {
- Name (_ADR, 0x00020000) // _ADR: Address
- Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
- {
- Store (Package ()
- {
- "name",
- Buffer ()
- {
- "display"
- },
- // This is a connector-less frame for Azul HD 4600
- "AAPL,ig-platform-id",
- Buffer (0x04)
- {
- 0x04, 0x00, 0x12, 0x04
- },
- // This is an override for built-in device-id
- "device-id",
- Buffer (0x04)
- {
- 0x12, 0x04, 0x00, 0x00
- }
- }, Local0)
- DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
- Return (Local0)
- }
- }
- Method (DTGP, 5, NotSerialized)
- {
- If (LEqual (Arg0, ToUUID ("a0b5b7c6-1318-441c-b0c9-fe695eaf949b")))
- {
- If (LEqual (Arg1, One))
- {
- If (LEqual (Arg2, Zero))
- {
- Store (Buffer (One)
- {
- 0x03
- }, Arg4)
- Return (One)
- }
- If (LEqual (Arg2, One))
- {
- Return (One)
- }
- }
- }
- Store (Buffer (One)
- {
- 0x00
- }, Arg4)
- Return (Zero)
- }
- }
- }
Advertisement
Add Comment
Please, Sign In to add comment