Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [andrzejl@wishmasdell ~]$ su
- Password:
- [root@wishmasdell andrzejl]# uname -r
- 3.2.16-pclos1.bfs
- [root@wishmasdell andrzejl]# cat /var/log/dmesg
- Linux version 3.2.16-pclos1.bfs ([email protected]) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Mon Apr 23 07:40:32 CEST 2012
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- NSC Geode by NSC
- Cyrix CyrixInstead
- Centaur CentaurHauls
- Transmeta GenuineTMx86
- Transmeta TransmetaCPU
- UMC UMC UMC UMC
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003ffae000 (usable)
- BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved)
- BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
- BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
- Notice: NX (Execute Disable) protection missing in CPU!
- DMI 2.3 present.
- DMI: Dell Computer Corporation Latitude D600 / , BIOS A16 06/29/2005
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x3ffae max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-CFFFF write-protect
- D0000-EFFFF uncachable
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask FC0000000 write-back
- 1 base 0FEDA0000 mask FFFFE0000 write-through
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- PAT not supported by CPU.
- initial memory mapped : 0 - 00c00000
- Base memory trampoline at [c009b000] 9b000 size 16384
- init_memory_mapping: 0000000000000000-00000000373fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037000000 page 2M
- 0037000000 - 00373fe000 page 4k
- kernel direct mapping tables up to 373fe000 @ bfa000-c00000
- RAMDISK: 37aae000 - 37ff0000
- Allocated new RAMDISK: 36ebc000 - 373fd8e8
- Move RAMDISK from 0000000037aae000 - 0000000037fef8e7 to 36ebc000 - 373fd8e7
- ACPI: RSDP 000fdf00 00014 (v00 DELL )
- ACPI: RSDT 3fff0000 0002C (v01 DELL CPi R 27D5061D ASL 00000061)
- ACPI: FACP 3fff0400 00074 (v01 DELL CPi R 27D5061D ASL 00000061)
- ACPI: DSDT 3fff0c00 02E1A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
- ACPI: FACS 3ffff800 00040
- ACPI: ASF! 3fff0800 0005B (v16 DELL CPi R 27D5061D ASL 00000061)
- 139MB HIGHMEM available.
- 883MB LOWMEM available.
- mapped low ram: 0 - 373fe000
- low ram: 0 - 373fe000
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x000373fe
- HighMem 0x000373fe -> 0x0003ffae
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0003ffae
- On node 0 totalpages: 261949
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 1736 pages used for memmap
- Normal zone: 220470 pages, LIFO batch:31
- HighMem zone: 280 pages used for memmap
- HighMem zone: 35480 pages, LIFO batch:7
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x808
- SMP: Allowing 1 CPUs, 0 hotplug CPUs
- Local APIC disabled by BIOS -- reenabling.
- Found and enabled local APIC!
- nr_irqs_gsi: 16
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
- Allocating PCI resources starting at 40000000 (gap: 40000000:beda0000)
- setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
- PERCPU: Embedded 12 pages/cpu @f6000000 s27776 r0 d21376 u4194304
- pcpu-alloc: s27776 r0 d21376 u4194304 alloc=1*4194304
- pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259901
- Kernel command line: BOOT_IMAGE=3.2.16-pclos1.bfs root=UUID=f9b85770-3ced-44c2-85b4-0f10e2917209 resume=UUID=7b9be4fb-ce45-43a0-aad6-f9cd3967ac7f lapic pci=use_crs splash=silent vga=791
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Initializing CPU#0
- Initializing HighMem for node 0 (000373fe:0003ffae)
- Memory: 1027712k/1048248k available (3320k kernel code, 20084k reserved, 1320k data, 484k init, 143040k highmem)
- virtual kernel memory layout:
- fixmap : 0xffab6000 - 0xfffff000 (5412 kB)
- pkmap : 0xff400000 - 0xff800000 (4096 kB)
- vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- .init : 0xc0589000 - 0xc0602000 ( 484 kB)
- .data : 0xc043e26d - 0xc05882c0 (1320 kB)
- .text : 0xc0100000 - 0xc043e26d (3320 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- Preemptible hierarchical RCU implementation.
- NR_IRQS:4352 nr_irqs:784 16
- CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
- Console: colour dummy device 80x25
- console [tty0] enabled
- Fast TSC calibration using PIT
- Detected 597.544 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 1195.08 BogoMIPS (lpj=597544)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- Mount-cache hash table entries: 512
- mce: CPU supports 5 MCE banks
- CPU0: Thermal monitoring enabled (TM2)
- SMP alternatives: switching to UP code
- Freeing SMP alternatives: 12k freed
- ACPI: Core revision 20110623
- ACPI: setting ELCR to 0200 (from 0800)
- ftrace: allocating 14817 entries in 29 pages
- weird, boot CPU (#0) not listed by the BIOS.
- SMP motherboard not detected.
- Enabling APIC mode: Flat. Using 0 I/O APICs
- SMP disabled
- Performance Events: p6 PMU driver.
- ... version: 0
- ... bit width: 32
- ... generic registers: 2
- ... value mask: 00000000ffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 0
- ... event mask: 0000000000000003
- Brought up 1 CPUs
- Total of 1 processors activated (1195.08 BogoMIPS).
- devtmpfs: initialized
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S3 S4 S5)
- ACPI: Using PIC for interrupt routing
- ACPI: ACPI Dock Station Driver: 1 docks/bays found
- HEST: Table not found.
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
- pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfed9ffff]
- pci_root PNP0A03:00: host bridge window [mem 0xfee00000-0xffafffff]
- pci 0000:00:00.0: [8086:3340] type 0 class 0x000600
- pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
- pci 0000:00:01.0: [8086:3341] type 1 class 0x000604
- pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
- pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f]
- pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
- pci 0000:00:1d.1: reg 20: [io 0xbf40-0xbf5f]
- pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
- pci 0000:00:1d.2: reg 20: [io 0xbf20-0xbf3f]
- pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
- pci 0000:00:1d.7: reg 10: [mem 0xf4fffc00-0xf4ffffff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
- pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
- pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
- pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
- pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
- pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
- pci 0000:00:1f.1: reg 20: [io 0xbfa0-0xbfaf]
- pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
- pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
- pci 0000:00:1f.5: reg 10: [io 0xb800-0xb8ff]
- pci 0000:00:1f.5: reg 14: [io 0xbc40-0xbc7f]
- pci 0000:00:1f.5: reg 18: [mem 0xf4fff800-0xf4fff9ff]
- pci 0000:00:1f.5: reg 1c: [mem 0xf4fff400-0xf4fff4ff]
- pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.5: PME# disabled
- pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
- pci 0000:00:1f.6: reg 10: [io 0xb400-0xb4ff]
- pci 0000:00:1f.6: reg 14: [io 0xb080-0xb0ff]
- pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.6: PME# disabled
- pci 0000:01:00.0: [1002:4c66] type 0 class 0x000300
- pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
- pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
- pci 0000:01:00.0: reg 18: [mem 0xfcff0000-0xfcffffff]
- pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
- pci 0000:00:01.0: bridge window [mem 0xe8000000-0xefffffff pref]
- pci 0000:02:00.0: [14e4:16a6] type 0 class 0x000200
- pci 0000:02:00.0: reg 10: [mem 0xfaff0000-0xfaffffff 64bit]
- pci 0000:02:00.0: PME# supported from D3hot D3cold
- pci 0000:02:00.0: PME# disabled
- pci 0000:02:01.0: [1217:7113] type 2 class 0x000607
- pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
- pci 0000:02:01.0: supports D1 D2
- pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:02:01.0: PME# disabled
- pci 0000:02:01.1: [1217:7113] type 2 class 0x000607
- pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff]
- pci 0000:02:01.1: supports D1 D2
- pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:02:01.1: PME# disabled
- pci 0000:02:03.0: [168c:001a] type 0 class 0x000200
- pci 0000:02:03.0: reg 10: [mem 0xfafe0000-0xfafeffff]
- pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0xd000-0xefff]
- pci 0000:00:1e.0: bridge window [mem 0xf6000000-0xfbffffff]
- pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfed9ffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0xfee00000-0xffafffff] (subtractive decode)
- pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
- pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02-02]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
- pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
- ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:01:00.0
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009f000 - 000000000009ffff
- reserve RAM buffer: 000000003ffae000 - 000000003fffffff
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [mem 0x00000000-0x0009fbff]
- pnp 00:00: [mem 0x0009fc00-0x0009ffff]
- pnp 00:00: [mem 0x000c0000-0x000cffff]
- pnp 00:00: [mem 0x000e0000-0x000fffff]
- pnp 00:00: [mem 0x00100000-0x3ffeffff]
- pnp 00:00: [mem 0x3fff0000-0x3fffffff]
- pnp 00:00: [mem 0xfeda0000-0xfedfffff]
- pnp 00:00: [mem 0xffb00000-0xffbfffff]
- system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
- system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
- system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
- system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
- system 00:00: [mem 0x3fff0000-0x3fffffff] has been reserved
- system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
- system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
- system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:01: [bus 00-ff]
- pnp 00:01: [io 0x0000-0x0cf7 window]
- pnp 00:01: [io 0x0cf8-0x0cff]
- pnp 00:01: [io 0x0d00-0xffff window]
- pnp 00:01: [mem 0x000a0000-0x000bffff window]
- pnp 00:01: [mem 0x000d0000-0x000dffff window]
- pnp 00:01: [mem 0x40000000-0xfed9ffff window]
- pnp 00:01: [mem 0xfee00000-0xffafffff window]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:02: [io 0x0092]
- pnp 00:02: [io 0x00b2]
- pnp 00:02: [io 0x0020-0x0021]
- pnp 00:02: [io 0x00a0-0x00a1]
- pnp 00:02: [irq 2 disabled]
- pnp 00:02: [io 0x04d0-0x04d1]
- pnp 00:02: [io 0x0800-0x0805]
- pnp 00:02: [io 0x0808-0x080f]
- system 00:02: [io 0x04d0-0x04d1] has been reserved
- system 00:02: [io 0x0800-0x0805] has been reserved
- system 00:02: [io 0x0808-0x080f] has been reserved
- system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:03: [io 0xf400-0xf4fe]
- pnp 00:03: [io 0x0086]
- pnp 00:03: [io 0x00b3]
- pnp 00:03: [io 0x0806-0x0807]
- pnp 00:03: [io 0x0810-0x085f]
- pnp 00:03: [io 0x0860-0x087f]
- pnp 00:03: [io 0x0880-0x08bf]
- pnp 00:03: [io 0x08c0-0x08df]
- pnp 00:03: [io 0x08e0-0x08ff]
- system 00:03: [io 0xf400-0xf4fe] has been reserved
- system 00:03: [io 0x0806-0x0807] has been reserved
- system 00:03: [io 0x0810-0x085f] has been reserved
- system 00:03: [io 0x0860-0x087f] has been reserved
- system 00:03: [io 0x0880-0x08bf] has been reserved
- system 00:03: [io 0x08c0-0x08df] has been reserved
- system 00:03: [io 0x08e0-0x08ff] has been reserved
- system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:04: [irq 12]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
- pnp 00:05: [io 0x0060]
- pnp 00:05: [io 0x0064]
- pnp 00:05: [irq 1]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
- pnp 00:06: [io 0x0070-0x0071]
- pnp 00:06: [irq 8]
- pnp 00:06: [io 0x0072-0x0077]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:07: [io 0x0061]
- pnp 00:07: [io 0x0063]
- pnp 00:07: [io 0x0065]
- pnp 00:07: [io 0x0067]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:08: [io 0x002e-0x002f]
- pnp 00:08: [io 0x004e-0x004f]
- pnp 00:08: [io 0x0900-0x097f]
- system 00:08: [io 0x0900-0x097f] has been reserved
- system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:09: [dma 4]
- pnp 00:09: [io 0x0000-0x000f]
- pnp 00:09: [io 0x0080-0x0085]
- pnp 00:09: [io 0x0087-0x008f]
- pnp 00:09: [io 0x00c0-0x00df]
- pnp 00:09: [io 0x0010-0x001f]
- pnp 00:09: [io 0x0090-0x0091]
- pnp 00:09: [io 0x0093-0x009f]
- pnp 00:09: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:0a: [io 0x00f0-0x00ff]
- pnp 00:0a: [irq 13]
- pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:0b: [irq 4]
- pnp 00:0b: [io 0x03f8-0x03ff]
- pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:0c: [dma 1]
- pnp 00:0c: [irq 7]
- pnp 00:0c: [io 0x0378-0x037f]
- pnp 00:0c: [io 0x0778-0x077b]
- pnp 00:0c: Plug and Play ACPI device, IDs PNP0401 (active)
- pnp: PnP ACPI: found 13 devices
- ACPI: ACPI bus type pnp unregistered
- PnPBIOS: Disabled by ACPI PNP
- Switching to clocksource acpi_pm
- PCI: max bus depth: 2 pci_try_num: 3
- pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
- pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
- pci 0000:00:1e.0: BAR 15: assigned [mem 0x44000000-0x4bffffff pref]
- pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
- pci 0000:00:01.0: bridge window [mem 0xe8000000-0xefffffff pref]
- pci 0000:02:01.0: BAR 0: assigned [mem 0xf8000000-0xf8000fff]
- pci 0000:02:01.0: BAR 0: set to [mem 0xf8000000-0xf8000fff] (PCI address [0xf8000000-0xf8000fff])
- pci 0000:02:01.1: BAR 0: assigned [mem 0x4c000000-0x4c000fff]
- pci 0000:02:01.1: BAR 0: set to [mem 0x4c000000-0x4c000fff] (PCI address [0x4c000000-0x4c000fff])
- pci 0000:02:01.1: BAR 16: assigned [mem 0x50000000-0x53ffffff]
- pci 0000:02:01.1: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
- pci 0000:02:01.1: BAR 14: assigned [io 0xd000-0xd0ff]
- pci 0000:02:01.1: BAR 13: assigned [io 0xd400-0xd4ff]
- pci 0000:02:01.0: BAR 16: assigned [mem 0x54000000-0x57ffffff]
- pci 0000:02:01.0: BAR 15: assigned [mem 0x48000000-0x4bffffff pref]
- pci 0000:02:01.0: BAR 14: assigned [io 0xd800-0xd8ff]
- pci 0000:02:01.0: BAR 13: assigned [io 0xdc00-0xdcff]
- pci 0000:02:01.0: CardBus bridge to [bus 03-06]
- pci 0000:02:01.0: bridge window [io 0xdc00-0xdcff]
- pci 0000:02:01.0: bridge window [io 0xd800-0xd8ff]
- pci 0000:02:01.0: bridge window [mem 0x48000000-0x4bffffff pref]
- pci 0000:02:01.0: bridge window [mem 0x54000000-0x57ffffff]
- pci 0000:02:01.1: CardBus bridge to [bus 07-0a]
- pci 0000:02:01.1: bridge window [io 0xd400-0xd4ff]
- pci 0000:02:01.1: bridge window [io 0xd000-0xd0ff]
- pci 0000:02:01.1: bridge window [mem 0x44000000-0x47ffffff pref]
- pci 0000:02:01.1: bridge window [mem 0x50000000-0x53ffffff]
- pci 0000:00:1e.0: PCI bridge to [bus 02-02]
- pci 0000:00:1e.0: bridge window [io 0xd000-0xefff]
- pci 0000:00:1e.0: bridge window [mem 0xf6000000-0xfbffffff]
- pci 0000:00:1e.0: bridge window [mem 0x44000000-0x4bffffff pref]
- pci 0000:00:1e.0: setting latency timer to 64
- pci 0000:02:01.0: enabling device (0000 -> 0003)
- ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
- PCI: setting IRQ 11 as level-triggered
- pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- pci 0000:02:01.1: enabling device (0000 -> 0003)
- pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:00: resource 8 [mem 0x40000000-0xfed9ffff]
- pci_bus 0000:00: resource 9 [mem 0xfee00000-0xffafffff]
- pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
- pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
- pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
- pci_bus 0000:02: resource 1 [mem 0xf6000000-0xfbffffff]
- pci_bus 0000:02: resource 2 [mem 0x44000000-0x4bffffff pref]
- pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:02: resource 8 [mem 0x40000000-0xfed9ffff]
- pci_bus 0000:02: resource 9 [mem 0xfee00000-0xffafffff]
- pci_bus 0000:03: resource 0 [io 0xdc00-0xdcff]
- pci_bus 0000:03: resource 1 [io 0xd800-0xd8ff]
- pci_bus 0000:03: resource 2 [mem 0x48000000-0x4bffffff pref]
- pci_bus 0000:03: resource 3 [mem 0x54000000-0x57ffffff]
- pci_bus 0000:07: resource 0 [io 0xd400-0xd4ff]
- pci_bus 0000:07: resource 1 [io 0xd000-0xd0ff]
- pci_bus 0000:07: resource 2 [mem 0x44000000-0x47ffffff pref]
- pci_bus 0000:07: resource 3 [mem 0x50000000-0x53ffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
- pci 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
- pci 0000:00:1d.0: PCI INT A disabled
- pci 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- pci 0000:00:1d.1: PCI INT B disabled
- ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
- pci 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
- pci 0000:00:1d.2: PCI INT C disabled
- ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
- pci 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
- pci 0000:00:1d.7: PCI INT D disabled
- pci 0000:01:00.0: Boot video device
- PCI: CLS 32 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 5384k freed
- apm: BIOS not found.
- audit: initializing netlink socket (disabled)
- type=2000 audit(1335458747.618:1): initialized
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1738
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- vesafb: mode is 1024x768x16, linelength=2048, pages=20
- vesafb: protected mode interface info at c000:57f3
- vesafb: pmi: set display start = c00c5861, set palette = c00c589b
- vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- vesafb: framebuffer at 0xe8000000, mapped to 0xf7c80000, using 3072k, total 32704k
- Console: switching to colour frame buffer device 128x48
- fb0: VESA VGA frame buffer device
- ERST: Table is not found!
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
- PCI: setting IRQ 5 as level-triggered
- serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
- serial 0000:00:1f.6: PCI INT B disabled
- Linux agpgart interface v0.103
- agpgart-intel 0000:00:00.0: Intel 855PM Chipset
- agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
- brd: module loaded
- i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one day, 114 bytes nvram
- cpuidle: using governor ladder
- cpuidle: using governor menu
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- TCP cubic registered
- Registering the dns_resolver key type
- Using IPI No-Shortcut mode
- Refined TSC clocksource calibration: 598.069 MHz.
- Switching to clocksource tsc
- input: DualPoint Stick as /devices/platform/i8042/serio1/input/input1
- input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2
- registered taskstats version 1
- rtc_cmos 00:06: setting system clock to 2012-04-26 16:45:49 UTC (1335458749)
- BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
- Freeing unused kernel memory: 484k freed
- Write protecting the kernel text: 3324k
- Write protecting the kernel read-only data: 1032k
- BFS CPU scheduler v0.416 by Con Kolivas.
- nash-hotplug (29): /proc/29/oom_adj is deprecated, please use /proc/29/oom_score_adj instead.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.2.16-pclos1.bfs ehci_hcd
- usb usb1: SerialNumber: 0000:00:1d.7
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 3.2.16-pclos1.bfs uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 3.2.16-pclos1.bfs uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.1
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 3.2.16-pclos1.bfs uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.2
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- usb 1-1: new high-speed USB device number 2 using ehci_hcd
- usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- usb 1-1: Product: USB2.0 Hub
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ata_piix 0000:00:1f.1: version 2.13
- ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
- ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
- ata_piix 0000:00:1f.1: setting latency timer to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
- usb 2-2: new full-speed USB device number 2 using uhci_hcd
- ata1.00: ATA-7: SAMSUNG MP0402H, YQ200-05, max UDMA/100
- ata1.00: 78242976 sectors, multi 8: LBA48
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H YQ20 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- ata2.00: ATAPI: Optiarc DVD RW AD-5540A, 2.62, max UDMA/33
- ata2.00: configured for UDMA/33
- sda: sda1 sda2 < sda5 sda6 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-5540A 2.62 PQ: 0 ANSI: 5
- usb 2-2: New USB device found, idVendor=413c, idProduct=8000
- usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- Uniform Multi-Platform E-IDE driver
- usb 1-1.1: new low-speed USB device number 4 using ehci_hcd
- ide-gd driver 1.18
- usb 1-1.1: New USB device found, idVendor=04d9, idProduct=1603
- usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1.1: Product: USB Keyboard
- usb 1-1.1: Manufacturer:
- input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
- generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.7-1.1/input0
- input: USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input4
- generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.7-1.1/input1
- usb 1-1.2: new low-speed USB device number 5 using ehci_hcd
- usb 1-1.2: New USB device found, idVendor=1267, idProduct=0201
- usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- usb 1-1.2: Product: PS/2+USB Mouse
- input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
- generic-usb 0003:1267:0201.0003: input,hidraw2: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.7-1.2/input0
- EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
- udev[107]: starting version 167
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- scsi 1:0:0:0: Attached scsi generic sg1 type 5
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
- iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
- Marking TSC unstable due to TSC halts in idle
- Switching to clocksource acpi_pm
- ACPI: acpi_idle registered with cpuidle
- ACPI: Battery Slot [BAT0] (battery absent)
- ACPI: Battery Slot [BAT1] (battery absent)
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
- ACPI: Lid Switch [LID]
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
- ACPI: Power Button [PBTN]
- input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8
- ACPI: Sleep Button [SBTN]
- intel_rng: FWH not detected
- ACPI: AC Adapter [AC] (on-line)
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [THM] (39 C)
- Bluetooth: Core ver 2.16
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input9
- ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
- dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
- yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:011d]
- yenta_cardbus 0000:02:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
- yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0498, PCI irq 11
- yenta_cardbus 0000:02:01.0: Socket status: 30000006
- pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
- yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0xd000-0xefff]
- pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xefff:
- parport_pc 00:0c: reported by Plug and Play ACPI
- parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- cfg80211: Calling CRDA to update world regulatory domain
- excluding 0xd000-0xd0ff 0xd400-0xd4ff 0xd800-0xd8ff 0xdc00-0xdcff
- yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xf6000000-0xfbffffff]
- pcmcia_socket pcmcia_socket0: cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf7e00000-0xf83fffff 0xfae00000-0xfb3fffff
- yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0x44000000-0x4bffffff pref]
- pcmcia_socket pcmcia_socket0: cs: memory probe 0x44000000-0x4bffffff: excluding 0x44000000-0x4bffffff
- tg3.c:v3.121 (November 2, 2011)
- tg3 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
- Bluetooth: Generic Bluetooth USB driver ver 0.6
- usbcore: registered new interface driver btusb
- ppdev: user-space parallel port driver
- tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95702A20) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0b:db:d6:7b:92
- tg3 0000:02:00.0: eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- tg3 0000:02:00.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
- yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:011d]
- yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
- yenta_cardbus 0000:02:01.1: Socket status: 30000410
- pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
- yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [io 0xd000-0xefff]
- pcmcia_socket pcmcia_socket1: cs: IO port probe 0xd000-0xefff: excluding 0xd000-0xd0ff 0xd400-0xd4ff 0xd800-0xd8ff 0xdc00-0xdcff
- yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [mem 0xf6000000-0xfbffffff]
- pcmcia_socket pcmcia_socket1: cs: memory probe 0xf6000000-0xfbffffff: excluding 0xf7e00000-0xf83fffff 0xfae00000-0xfb3fffff
- yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge window: [mem 0x44000000-0x4bffffff pref]
- pcmcia_socket pcmcia_socket1: cs: memory probe 0x44000000-0x4bffffff: excluding 0x44000000-0x4bffffff
- ath5k 0000:02:03.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
- ath5k 0000:02:03.0: registered as 'phy0'
- snd_intel8x0m 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
- snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
- MC'97 1 converters and GPIO not ready (0xff00)
- snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
- snd_intel8x0 0000:00:1f.5: setting latency timer to 64
- pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
- pcmcia_socket pcmcia_socket1: cs: memory probe 0xfb400000-0xfbffffff: clean.
- pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 3)
- cfg80211: World regulatory domain updated:
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- intel8x0_measure_ac97_clock: measured 50977 usecs (2456 samples)
- intel8x0: clocking to 48000
- ath: EEPROM regdomain: 0x63
- ath: EEPROM indicates we should expect a direct regpair map
- ath: Country alpha2 being used: 00
- ath: Regpair used: 0x63
- ieee80211 phy0: Selected rate control algorithm 'pid'
- ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
- fuse init (API version 7.17)
- [drm] Initialized drm 1.1.0 20060810
- [drm] radeon kernel modesetting enabled.
- checking generic (e8000000 1ff0000) vs hw (e8000000 8000000)
- fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
- Console: switching to colour dummy device 80x25
- radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
- [drm] initializing kernel modesetting (RV250 0x1002:0x4C66 0x1028:0x011D).
- [drm] register mmio base: 0xFCFF0000
- [drm] register mmio size: 65536
- agpgart-intel 0000:00:00.0: AGP 2.0 bridge
- agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
- radeon 0000:01:00.0: putting AGP V2 device into 4x mode
- radeon 0000:01:00.0: GTT: 128M 0xE0000000 - 0xE7FFFFFF
- radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (32M used)
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- [drm] radeon: irq initialized.
- [drm] Detected VRAM RAM=128M, BAR=128M
- [drm] RAM width 64bits DDR
- [TTM] Zone kernel: Available graphics memory: 445276 kiB.
- [TTM] Zone highmem: Available graphics memory: 516796 kiB.
- [TTM] Initializing pool allocator.
- [drm] radeon: 32M of VRAM memory ready
- [drm] radeon: 128M of GTT memory ready.
- radeon 0000:01:00.0: WB disabled
- [drm] Loading R200 Microcode
- [drm] radeon: ring at 0x00000000E0001000
- [drm] ring test succeeded in 1 usecs
- [drm] radeon: ib pool ready.
- [drm] ib test succeeded in 0 usecs
- [drm] Panel ID String: 6T999�141EA0
- [drm] Panel Size 1024x768
- [drm] radeon legacy LVDS backlight initialized
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] VGA
- [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
- [drm] Encoders:
- [drm] CRT1: INTERNAL_DAC1
- [drm] Connector 1:
- [drm] DVI-D
- [drm] HPD1
- [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
- [drm] Encoders:
- [drm] DFP1: INTERNAL_TMDS1
- [drm] Connector 2:
- [drm] LVDS
- [drm] Encoders:
- [drm] LCD1: INTERNAL_LVDS
- [drm] Connector 3:
- [drm] S-video
- [drm] Encoders:
- [drm] TV1: INTERNAL_DAC2
- [drm] radeon: power management initialized
- [drm] fb mappable at 0xE8040000
- [drm] vram apper at 0xE8000000
- [drm] size 786432
- [drm] fb depth is 8
- [drm] pitch is 1024
- fbcon: radeondrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 128x48
- fb0: radeondrmfb frame buffer device
- drm: registered panic notifier
- [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
- i8k: unable to get SMM BIOS version
- Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto ([email protected])
- Non-volatile memory driver v1.3
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
- EXT4-fs (sda1): re-mounted. Opts: (null)
- EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- loop: module loaded
- Adding 522076k swap on /dev/sda5. Priority:-1 extents:1 across:522076k
- [root@wishmasdell andrzejl]#
Advertisement
Add Comment
Please, Sign In to add comment