Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 2.6.35.7 (build@rx600s4-05) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP PREEMPT Wed Dec 7 04:54:01 JST 2011
- <4>[ 0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c53c7f
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- <4>[ 0.000000] Machine: OMAP4430 PANDORA BOARD
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <7>[ 0.000000] On node 0 totalpages: 246784
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c07547c0, node_mem_map c106d000
- <7>[ 0.000000] Normal zone: 1280 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 147200 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 768 pages used for memmap
- <7>[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
- <6>[ 0.000000] ***********************
- <6>[ 0.000000] OMAP4430 ES2.3 type(HS)
- <6>[ 0.000000] id-code (6b95c02f)
- <6>[ 0.000000] Die-id (77980006-00000001-091126AC-1701A019)
- <6>[ 0.000000] Prod-id (000EB95C-000600CC)
- <6>[ 0.000000] ***********************
- <6>[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0x100000
- <3>[ 0.000000] FIXME: omap44xx_sram_init not implemented
- <6>[ 0.000000] Reserving 20971520 bytes SDRAM for VRAM
- <6>[ 0.000000] SMC: Allocated workspace of 300000 Bytes at (0x9c900000)
- <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c4c7b000 s5760 r8192 d14720 u65536
- <6>[ 0.000000] pcpu-alloc: s5760 r8192 d14720 u65536 alloc=16*4096
- <6>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 244736
- <5>[ 0.000000] Kernel command line: rootdelay=2 mem=452M@0x80000000 mem=512M@0xA0000000 init=/init vram=20M omapfb.vram=0:8M usbsw=00 omapfb.tiler=1
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Memory: 452MB 128MB 384MB = 964MB total
- <5>[ 0.000000] Memory: 913580k/913580k available, 73556k reserved, 393216K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- <5>[ 0.000000] vmalloc : 0xe8800000 - 0xf8000000 ( 248 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc0048000 ( 256 kB)
- <5>[ 0.000000] .text : 0xc0048000 - 0xc06ec000 (6800 kB)
- <5>[ 0.000000] .data : 0xc06ec000 - 0xc07552c0 ( 421 kB)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
- <6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
- <6>[ 0.000000] NR_IRQS:388
- <4>[ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
- <4>[ 0.000000] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- <4>[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- <4>[ 0.000000] omap_hwmod: dmic: resetting
- <4>[ 0.000000] omap_hwmod: dss_dsi1: cannot be enabled (3)
- <4>[ 0.000000] omap_hwmod: dss_dsi2: cannot be enabled (3)
- <4>[ 0.000000] omap_hwmod: dss_hdmi: cannot be enabled (3)
- <4>[ 0.000000] omap_hwmod: dss_rfbi: cannot be enabled (3)
- <4>[ 0.000000] omap_hwmod: dss_venc: cannot be enabled (3)
- <4>[ 0.000000] omap_hwmod: iva: failed to reset in 10000 usec
- <4>[ 0.000000] omap_hwmod: mailbox: resetting
- <4>[ 0.000000] omap_hwmod: omap-mcpdm-dai: cannot be enabled (3)
- <4>[ 0.000000] omap_hwmod: mcspi1: resetting
- <4>[ 0.000000] omap_hwmod: mcspi2: resetting
- <4>[ 0.000000] omap_hwmod: mcspi3: resetting
- <4>[ 0.000000] omap_hwmod: mcspi4: resetting
- <4>[ 0.000000] omap_hwmod: mmc1: resetting
- <4>[ 0.000000] omap_hwmod: mmc2: resetting
- <4>[ 0.000000] omap_hwmod: mmc3: resetting
- <4>[ 0.000000] omap_hwmod: mmc4: resetting
- <4>[ 0.000000] omap_hwmod: mmc5: resetting
- <4>[ 0.000000] omap_hwmod: timer3: resetting
- <4>[ 0.000000] omap_hwmod: timer4: resetting
- <4>[ 0.000000] omap_hwmod: timer5: resetting
- <4>[ 0.000000] omap_hwmod: timer6: resetting
- <4>[ 0.000000] omap_hwmod: timer7: resetting
- <4>[ 0.000000] omap_hwmod: timer8: resetting
- <4>[ 0.000000] omap_hwmod: timer9: resetting
- <4>[ 0.000000] omap_hwmod: timer11: resetting
- <6>[ 0.000000] GPMC revision 6.0
- <6>[ 0.000000] SmartReflex CLASS3 initialized
- <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- <4>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000000] console [tty0] enabled
- <6>[ 0.000000] Calibrating delay loop... 1195.29 BogoMIPS (lpj=4669440)
- <6>[ 0.000000] pid_max: default: 32768 minimum: 301
- <6>[ 0.000000] Security Framework initialized
- <6>[ 0.000000] FJSEC LSM module initialized
- <4>[ 0.000000] Mount-cache hash table entries: 512
- <6>[ 0.000000] Initializing cgroup subsys debug
- <6>[ 0.000000] Initializing cgroup subsys cpuacct
- <6>[ 0.000000] Initializing cgroup subsys freezer
- <6>[ 0.000000] CPU: Testing write buffer coherency: ok
- <6>[ 0.000000] Calibrating local timer...
- <6>[ 0.000000] 50.00MHz.
- <6>[ 0.000000] L310 cache controller enabled
- <6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x1e470000
- <4>[ 0.000000] CPU1: Booted secondary processor
- <6>[ 0.000000] Brought up 2 CPUs
- <6>[ 0.000000] SMP: Total of 2 processors activated (2390.58 BogoMIPS).
- <6>[ 0.000000] devtmpfs: initialized
- <6>[ 0.000000] regulator: core version 0.5
- <6>[ 0.000000] NET: Registered protocol family 16
- <6>[ 0.000000] EMIF0 is enabled with IRQ142
- <6>[ 0.000000] EMIF1 is enabled with IRQ143
- <6>[ 0.000000] OMAP GPIO hardware version 0.1
- <6>[ 0.000000] omap_mux_init: Add partition: #1: core, flags: 2
- <6>[ 0.000000] omap_mux_init: Add partition: #2: wkup, flags: 2
- <6>[ 0.000000] Reprogramming LPDDR2 timingsto 400000000 Hz
- <6>[ 0.000000] pandora_display_init: start!!
- <6>[ 0.000000] Camera device register
- <4>[ 0.000000] omap4_tps62361_init: Retry count exceeded
- <7>[ 0.000000] [fjavdtv]init:OMAP_DTV_TSCLK [10a]
- <7>[ 0.000000] [fjavdtv]init:OMAP_DTV_DTV_IRQ success
- <7>[ 0.000000] [fjavdtv]init:DTV_XRST success
- <7>[ 0.000000] [fjavdtv]init:DTV_PON success
- <7>[ 0.000000] [fjavdtv]init:DTV_XSTBY success
- <7>[ 0.000000] [fjavdtv]init:DTV_TSCLK [102]
- <3>[ 0.000000] _omap_mux_init_signal: Could not set signal sim_pwrctrl.gpio_wk4
- <3>[ 0.000000] _omap_mux_init_signal: Could not set signal sim_io.gpio_wk0
- <3>[ 0.000000] res->start = 49022000
- <3>[ 0.000000] res->start = 49024000
- <3>[ 0.000000] res->start = 49026000
- <3>[ 0.000000] res->start = 48096000
- <6>[ 0.000000] OMAP DMA hardware revision 0.0
- <6>[ 0.000000] dma dma.0: System DMA registered
- <4>[ 0.028045] bio: create slab <bio-0> at 0
- <5>[ 0.032714] SCSI subsystem initialized
- <6>[ 0.035003] usbcore: registered new interface driver usbfs
- <6>[ 0.035369] usbcore: registered new interface driver hub
- <6>[ 0.035614] usbcore: registered new device driver usb
- <6>[ 0.036285] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
- <4>[ 0.038452] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- <6>[ 0.039062] twl6030: PIH (irq 39) chaining IRQs 368..387
- <6>[ 0.047485] regulator: VUSB: 3300 mV normal standby
- <6>[ 0.048400] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
- <6>[ 0.049438] regulator: VMMC: 1200 <--> 3000 mV at 1800 mV normal standby
- <6>[ 0.050109] regulator: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
- <6>[ 0.050750] regulator: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby
- <6>[ 0.051239] regulator: VANA: 2100 mV normal standby
- <6>[ 0.051727] regulator: VCXIO: 1800 mV normal standby
- <6>[ 0.052185] regulator: VDAC: 1800 mV normal standby
- <6>[ 0.052825] regulator: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
- <6>[ 0.053497] regulator: VAUX2_6030: 1200 <--> 2800 mV at 2800 mV normal standby
- <6>[ 0.054687] regulator: VAUX3_6030: 1000 <--> 3000 mV at 2800 mV normal standby
- <6>[ 0.055114] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- <6>[ 0.055999] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
- <6>[ 0.056976] i2c_omap i2c_omap.4: bus 4 rev4.0 at 400 kHz
- <4>[ 0.057586] tpa2028d1_probe Line(232) client(e7cf3e00) data(e7c78900) client->addr(58)
- <4>[ 0.058837] --- Probe bd6184
- <7>[ 0.084991] Registered led device: lcd-backlight
- <6>[ 0.087341] Advanced Linux Sound Architecture Driver Version 1.0.23.
- <6>[ 0.088134] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- <6>[ 0.088195] Bluetooth: Core ver 2.15
- <6>[ 0.088378] NET: Registered protocol family 31
- <6>[ 0.088409] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.088439] Bluetooth: HCI socket layer initialized
- <6>[ 0.088836] Switching to clocksource timer-32k
- <6>[ 0.106201] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- <7>[ 0.106445] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[ 0.106445] musb_hdrc: MHDRC RTL version 2.0
- <7>[ 0.106475] musb_hdrc: setup fifo_mode 4
- <7>[ 0.106536] musb_hdrc: 28/31 max ep, 16384/16384 memory
- <6>[ 0.106689] musb_hdrc musb_hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
- <6>[ 0.137847] NET: Registered protocol family 2
- <6>[ 0.138000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.138397] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.141784] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- <6>[ 0.143554] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.143585] TCP reno registered
- <6>[ 0.143615] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.143676] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.143951] NET: Registered protocol family 1
- <6>[ 0.161285] RPC: Registered udp transport module.
- <6>[ 0.161315] RPC: Registered tcp transport module.
- <6>[ 0.161346] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 0.161651] Trying to unpack rootfs image as initramfs...
- <6>[ 0.202148] Freeing initrd memory: 432K
- <4>[ 0.203643] opp_add: no hwmod for hsi, cannot add OPPs.
- <3>[ 0.203674] unable to add OPP 98304000 Hz for hsi
- <4>[ 0.203704] opp_add: no hwmod for hsi, cannot add OPPs.
- <3>[ 0.203735] unable to add OPP 96000000 Hz for hsi
- <4>[ 0.203765] opp_add: no hwmod for hsi, cannot add OPPs.
- <3>[ 0.203765] unable to add OPP 96000000 Hz for hsi
- <6>[ 0.207214] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
- <6>[ 0.207244] ipu-power initialized ipu, major: 250, minor: 0
- <4>[ 0.207672] sdp4430_wifi_init: start
- <6>[ 0.208099] omap-iommu omap-iommu.0: ducati registered
- <6>[ 0.208190] omap-iommu omap-iommu.1: tesla registered
- <6>[ 0.208923] iovmm-omap initialized ducati, major: 249, base-minor: 0
- <6>[ 0.209197] iovmm-omap initialized tesla, major: 249, base-minor: 1
- <6>[ 0.210266] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
- <6>[ 0.210571] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 248, base-minor: 0
- <6>[ 0.210632] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
- <6>[ 0.210876] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 248, base-minor: 1
- <6>[ 0.210937] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
- <6>[ 0.211242] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 248, base-minor: 2
- <4>[ 0.230987] highmem bounce pool size: 64 pages
- <6>[ 0.231414] ashmem: initialized
- <5>[ 0.244232] VFS: Disk quotas dquot_6.5.2
- <4>[ 0.244659] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <6>[ 0.249572] msgmni has been set to 1017
- <6>[ 0.249938] Registering char device tf_driver (122:0)
- <6>[ 0.254852] alg: No test for stdrng (krng)
- <6>[ 0.254943] io scheduler noop registered
- <6>[ 0.254974] io scheduler deadline registered
- <6>[ 0.255126] io scheduler cfq registered (default)
- <4>[ 0.255737] ### dss_init(skip=0)
- <4>[ 0.255767] ### CM_DSS_CLKSTCRL(bit 10,9==1 check) 0x00000e03### DISPC_SYSSTATUS, bit0 = 1, RESETDONE(loop=0)
- <4>[ 0.317504] ### DSI_SYSCONFIG, bit0 = 1, RESETDONE(loop=1)
- <6>[ 0.317565] OMAP DSS rev 4.0
- <6>[ 0.317993] OMAP DISPC rev 4.0
- <6>[ 0.318481] OMAP DSI rev 3.0
- <6>[ 0.318969] OMAP DSI2 rev 3.0
- <6>[ 0.319244] Enter hdmi_init()
- <7>[ 0.320892] init_display
- <7>[ 0.320983] ENTER hdmi_panel_probe()
- <6>[ 0.321014] HDMI Driver->probe
- <6>[ 0.321014] TPD12S015A HDMI level sifter disable.
- <6>[ 0.321044] hdmi_panel_probe x_res= 1920 y_res = 1080### OMAP_DISPLAY_TYPE_DPI mode OK!
- <7>[ 0.373229] misc dsscomp: display0=pandora_panel
- <7>[ 0.373260] misc dsscomp: display1=hdmi_panel
- <6>[ 0.373291] misc dsscomp: found 2 displays and 4 overlays
- <4>[ 0.374481] omap_smartreflex_disable_reset_volt: omap_sr struct for sr_core not found
- <4>[ 0.374847] omap_smartreflex_enable: omap_sr struct for sr_core not found
- <6>[ 0.375640] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- <6>[ 0.377502] [ttyO0]: sensor enabled.
- <6>[ 0.383056] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- <6>[ 0.383514] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- <6>[ 0.383850] omap-hsuart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
- <6>[ 0.384216] omap-hsuart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- <6>[ 0.395233] brd: module loaded
- <6>[ 0.400421] loop: module loaded
- <6>[ 0.401977] (stk) :sysfs entries created
- <6>[ 0.402038] (stk) : debugfs entries created
- <6>[ 0.412078] PPP generic driver version 2.4.2
- <6>[ 0.412536] PPP Deflate Compression module registered
- <6>[ 0.412597] PPP BSD Compression module registered
- <6>[ 0.413574] PPP MPPE Compression module registered
- <6>[ 0.413604] NET: Registered protocol family 24
- <6>[ 0.413635] Initializing USB Mass Storage driver...
- <6>[ 0.413940] usbcore: registered new interface driver usb-storage
- <6>[ 0.413970] USB Mass Storage support registered.
- <6>[ 0.413970] android init
- <6>[ 0.414093] android_probe pdata: c0711538
- <6>[ 0.414306] android_bind
- <7>[ 0.414306] android_bind_config
- <6>[ 0.414733] android_usb gadget: android_usb ready
- <6>[ 0.414764] musb_hdrc musb_hdrc: MUSB HDRC host driver
- <7>[ 0.414886] drivers/usb/core/inode.c: creating file 'devices'
- <7>[ 0.414916] drivers/usb/core/inode.c: creating file '001'
- <6>[ 0.414947] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
- <7>[ 0.415069] usb usb1: default language 0x0409
- <7>[ 0.415130] usb usb1: udev 1, busnum 1, minor = 0
- <6>[ 0.415130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 0.415161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 0.415191] usb usb1: Product: MUSB HDRC host driver
- <6>[ 0.415222] usb usb1: Manufacturer: Linux 2.6.35.7 musb-hcd
- <6>[ 0.415252] usb usb1: SerialNumber: musb_hdrc
- <7>[ 0.415771] usb usb1: usb_probe_device
- <7>[ 0.415802] usb usb1: configuration #1 chosen from 1 choice
- <7>[ 0.415832] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[ 0.416107] hub 1-0:1.0: usb_probe_interface
- <7>[ 0.416137] hub 1-0:1.0: usb_probe_interface - got id
- <6>[ 0.416137] hub 1-0:1.0: USB hub found
- <6>[ 0.416198] hub 1-0:1.0: 1 port detected
- <7>[ 0.416198] hub 1-0:1.0: standalone hub
- <7>[ 0.416229] hub 1-0:1.0: individual port power switching
- <7>[ 0.416229] hub 1-0:1.0: no over-current protection
- <7>[ 0.416259] hub 1-0:1.0: power on to power good time: 10ms
- <7>[ 0.416290] hub 1-0:1.0: local power source is good
- <7>[ 0.416290] hub 1-0:1.0: enabling power on all ports
- <7>[ 0.416687] drivers/usb/core/inode.c: creating file '001'
- <3>[ 0.446960] twl6030 usb_drv : case VBUS IN.
- <3>[ 0.471954] twl6030 usb_drv : charger_type = POWER_SUPPLY_TYPE_USB
- <7>[ 0.510864] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>[ 0.634246] omap_smartreflex_disable_reset_volt: omap_sr struct for sr_core not found
- <4>[ 0.634582] omap_smartreflex_enable: omap_sr struct for sr_core not found
- <3>[ 0.684143] twl6030 usb_drv : case USB-OTG OUT.
- <6>[ 0.684875] f_om init
- <6>[ 0.684906] android_register_function om
- <6>[ 0.684936] f_dm init
- <6>[ 0.684936] android_register_function dm
- <6>[ 0.684967] f_da init
- <6>[ 0.684997] android_register_function da
- <6>[ 0.684997] f_adb init
- <6>[ 0.685028] android_register_function adb
- <6>[ 0.685028] f_mass_storage init
- <6>[ 0.685150] fsg_probe pdev: c0711280, pdata: c0711528
- <6>[ 0.685394] android_register_function usb_mass_storage
- <6>[ 0.685424] f_mmp init
- <6>[ 0.685424] android_register_function mmp
- <6>[ 0.685455] f_rndis init
- <6>[ 0.685729] android_register_function rndis
- <6>[ 0.686828] rndis_function_bind_config MAC: 02:06:37:3F:38:30
- <4>[ 0.686889] android_usb gadget: using random self ethernet address
- <4>[ 0.686950] android_usb gadget: using random host ethernet address
- <6>[ 0.687561] usb0: MAC ca:19:d8:22:cb:0d
- <6>[ 0.687591] usb0: HOST MAC ea:bf:06:dc:20:0c
- <6>[ 0.688171] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 0.688201] android_usb gadget: Number of LUNs=2
- <6>[ 0.688232] lun0: LUN: removable file: (no medium)
- <6>[ 0.688262] lun1: LUN: removable file: (no medium)
- <6>[ 0.688659] adb_bind_config
- <6>[ 0.691894] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- <6>[ 0.693206] cyttsp_i2c_probe: Starting cyttsp3-i2c probe...
- <6>[ 0.694030] input: cyttsp3-i2c as /devices/platform/i2c_omap.2/i2c-2/2-003b/input/input1
- <3>[ 0.729614] cyttsp_dev_init:Set GPIO 1.8v On(0)
- <3>[ 0.729644] cyttsp_dev_init:Set GPIO 2.8v On(0)
- <3>[ 0.729675] cyttsp_dev_init:omap_read_signal(kpd_row3.gpio_175)(3)
- <3>[ 0.729705] cyttsp_dev_init:omap_read_signal(abe_dmic_clk1.gpio_119)(3)
- <3>[ 0.730743] cyttsp_dev_init:Set GPIO 2.8v On(1)
- <3>[ 0.730773] cyttsp_dev_init:Set GPIO 1.8v On(1)
- <3>[ 0.730804] cyttsp_dev_init:omap_read_signal(kpd_row3.gpio_175)(3)
- <3>[ 0.730834] cyttsp_dev_init:omap_read_signal(abe_dmic_clk1.gpio_119)(3)
- <4>[ 0.743011] [TPD]_cyttsp_startup: Cypress TouchDriver Startup
- <6>[ 0.743041] cyttsp_pr_state: BOOTLOADER
- <4>[ 0.743072] cyttsp_hw_reset: IN
- <4>[ 0.785003] cyttsp_hw_reset: OUT
- <6>[ 0.928497] _cyttsp_bl_app_valid: App found; normal boot
- <6>[ 0.995758] cyttsp_pr_state: READY
- <6>[ 1.002258] android_usb gadget: high speed config #1: android
- <4>[ 1.073852] function.disabled = 1
- <4>[ 1.073883] function.disabled = 1
- <4>[ 1.073913] function.disabled = 1
- <0>[ 1.073944] (drivers/usb/gadget/f_mass_storage.c:fsg_setup:662) 0 0 7
- <4>[ 1.122802] [TPD_Sy] 10,04,00,00,00,00,00,05,91,41,58,53,0C,37,19,01,0C,15,D5,00,12,01,06,00,00,00,00,00,01,0A,FF,02,00,08,9C,00,0A,1C
- <4>[ 1.122802] [TPD_Sy] 20,53,0D,00,76,03,01,00,03,00,0C,12,52,0B,05,07,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
- <6>[ 1.122894] _cyttsp_set_sysinfo_mode: hm=10 tv=15D5 ai=0x0012 av=0x0106 ci=0x000000
- <6>[ 1.151611] cyttsp_pr_state: ACTIVE
- <4>[ 1.152893] [TPD]_cyttsp_startup: Cypress TouchDriver is Active
- <6>[ 1.152984] cyttsp_i2c_probe: Registration for cyttsp3-i2c complete (Built Dec 7 2011 @ 04:48:44)
- <6>[ 1.154388] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2
- <6>[ 1.158264] using rtc device, twl_rtc, for alarms
- <6>[ 1.158325] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <6>[ 1.160125] i2c /dev entries driver
- <6>[ 1.161712] IR NEC protocol handler initialized
- <6>[ 1.161743] IR RC5(x) protocol handler initialized
- <6>[ 1.161773] IR RC6 protocol handler initialized
- <6>[ 1.161804] IR JVC protocol handler initialized
- <6>[ 1.161834] IR Sony protocol handler initialized
- <6>[ 1.161834] Linux video capture interface: v2.00
- <6>[ 1.162017] >> milbeaut_mod_init
- <6>[ 1.162231] << milbeaut_mod_init
- <6>[ 1.162261] >> s5k6aafx_mod_init
- <6>[ 1.162445] << s5k6aafx_mod_init
- <6>[ 1.162902] soc-camera-pdrv soc-camera-pdrv.0: Core-Probing soc-camera-pdrv.0
- <6>[ 1.162963] soc-camera-pdrv soc-camera-pdrv.1: Core-Probing soc-camera-pdrv.1
- <6>[ 1.167663] max17040 1-0036: MAX17040 Fuel-Gauge Ver 02
- <6>[ 1.819854] max17040_setup: val = ffffffd0(-48)(16573)(3c)
- <6>[ 1.825042] twl6030_set_nonvolatile_param: hardware_version = 02
- <6>[ 1.825103] twl6030_set_nonvolatile_param: cradle_charge_mA = 1500
- <6>[ 1.825103] twl6030_set_nonvolatile_param: ac_charge_mA = 1500
- <6>[ 1.825134] twl6030_set_nonvolatile_param: monitoring_interval = 10
- <6>[ 1.825164] twl6030_set_nonvolatile_param: temp1_limit_min = ffffffce(-50)
- <6>[ 1.825195] twl6030_set_nonvolatile_param: temp1_limit_max = 0258(600)
- <6>[ 1.825225] twl6030_set_nonvolatile_param: temp4_limit_min = 0001
- <6>[ 1.825256] twl6030_set_nonvolatile_param: temp4_limit_max = 0000
- <6>[ 1.825286] twl6030_set_nonvolatile_param: low_limit_min = 008c(140)
- <6>[ 1.825317] twl6030_set_nonvolatile_param: low_limit_max = 0226(550)
- <6>[ 1.825347] twl6030_set_nonvolatile_param: temp1_recharge_threshold= 023a(570)
- <6>[ 1.825378] twl6030_set_nonvolatile_param: anticollapse_ctrl1_reg = 0x05
- <6>[ 1.825408] twl6030_set_nonvolatile_param: anticollapse_ctrl2_reg = 0x9a
- <6>[ 1.825439] twl6030_set_nonvolatile_param: wakeup_timer_seconds = 100
- <6>[ 1.902923] twl6030_bci twl6030_bci: Battery Voltage at Bootup is 3750 mV
- <6>[ 1.902954] twl6030_stop_usb_charger: status=2, temp=0 adc=606
- <6>[ 1.903350] twl6030_start_usb_charger: status=2, V = 4200mV, A=500mA, temp=0
- <6>[ 1.944183] omap_wdt: set watchdog timer for boot timeout=120sec
- <6>[ 1.944519] OMAP Watchdog Timer Rev 0x00: initial timeout 120 sec
- <6>[ 1.945800] device-mapper: uevent: version 1.0.3
- <6>[ 1.946289] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- <6>[ 1.946411] cpuidle: using governor ladder
- <6>[ 1.946441] cpuidle: using governor menu
- <6>[ 1.952423] illumination_led_probe:Enter
- <7>[ 1.952667] Registered led device: battery
- <6>[ 1.958831] illumination_led_probe:Exit
- <4>[ 1.959716] Headset is Unplugged(FIRST).
- <4>[ 1.959747] FIRST call switch_set_state(0).
- <6>[ 1.960601] usbcore: registered new interface driver usbhid
- <6>[ 1.960632] usbhid: USB HID core driver
- <6>[ 1.961334] logger: created 64K log 'log_main'
- <6>[ 1.961608] logger: created 256K log 'log_events'
- <6>[ 1.961883] logger: created 1024K log 'log_radio'
- <6>[ 1.962158] logger: created 64K log 'log_system'
- <6>[ 1.964263] proc4430_drv_initializeModule
- <6>[ 1.965423] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
- <6>[ 1.965759] omap-devh initialized Tesla, major: 237, base-minor: 0
- <6>[ 1.966125] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
- <6>[ 1.966430] omap-devh initialized SysM3, major: 237, base-minor: 1
- <6>[ 1.966766] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
- <6>[ 1.967041] omap-devh initialized AppM3, major: 237, base-minor: 2
- <4>[ 1.974792] fj_mc_sound: major:235 minor:0
- <6>[ 1.975891] compass compass: DevNo:233.0 DRDY:GPIO154
- <6>[ 1.977386] IrDA: driver initialized. major:232 minor:0
- <7>[ 1.982910] [fjavdtv]mb86a29t_init -S
- <7>[ 1.982910] [fjavdtv]module 224 0
- <7>[ 1.983337] [fjavdtv]mb86a29t_init -E
- <6>[ 1.983947] tsif_init_one[0]
- <6>[ 1.984252] tsif tsif0: Device 223.0 attached to TSIF, buffer size 0
- <6>[ 1.986267] hdmi_lib already initialized
- <6>[ 1.988037] PANDORA SoC init
- <6>[ 1.989807] asoc: null-codec-dai <-> MultiMedia1 mapping ok
- <6>[ 2.000457] asoc: null-codec-dai <-> MultiMedia2 mapping ok
- <6>[ 2.066467] asoc: UBB4-VX <-> omap-mcbsp-dai.1 mapping ok
- <6>[ 2.067016] asoc: KODOH4-UBB4 <-> ubb4-pcma-dai mapping ok
- <6>[ 2.067657] asoc: HDMI <-> hdmi-dai mapping ok
- <6>[ 2.075897] asoc: KODOH4-MM_EXT <-> omap-mcbsp-dai.2 mapping ok
- <6>[ 2.077026] asoc: KODOH4-BT_VX <-> omap-mcbsp-dai.0 mapping ok
- <6>[ 2.081665] ALSA device list:
- <6>[ 2.081665] #0: FUJITSU OMAP4 PANDORA Board
- <6>[ 2.082183] Netfilter messages via NETLINK v0.30.
- <6>[ 2.082275] nf_conntrack version 0.5.0 (14281 buckets, 57124 max)
- <4>[ 2.082885] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>[ 2.082916] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>[ 2.082977] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <6>[ 2.083129] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 2.083587] xt_time: kernel timezone is -0000
- <6>[ 2.083862] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.084045] arp_tables: (C) 2002 David S. Miller
- <6>[ 2.084167] TCP cubic registered
- <6>[ 2.084167] Initializing XFRM netlink socket
- <6>[ 2.085815] NET: Registered protocol family 10
- <6>[ 2.086883] NET: Registered protocol family 17
- <6>[ 2.086944] NET: Registered protocol family 15
- <6>[ 2.087097] Bluetooth: L2CAP ver 2.15
- <6>[ 2.087097] Bluetooth: L2CAP socket layer initialized
- <6>[ 2.087158] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 2.087158] Bluetooth: SCO socket layer initialized
- <6>[ 2.087310] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 2.087371] Bluetooth: RFCOMM socket layer initialized
- <6>[ 2.087371] Bluetooth: RFCOMM ver 1.11
- <6>[ 2.087402] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 2.087432] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 2.087707] ThumbEE CPU extension supported.
- <4>[ 2.089416] omap_hwmod: Initialize debugfs support
- <3>[ 2.091308] Power Management for TI OMAP4.
- <6>[ 2.091522] prcm_clear_statdep_regs: Clearing static depndencies
- <3>[ 2.092193] CPUidle for CPU0 registered
- <6>[ 2.093078] mmc0: new high speed DDR MMC card at address 0001
- <3>[ 2.093566] CPUidle for CPU1 registered
- <6>[ 2.093688] mmcblk0: mmc0:0001 M8G2FA 7.20 GiB
- <6>[ 2.094024] mmcblk0:
- <6>[ 2.094604] Custom Partition
- <4>[ 2.094635] p1 (crashdumpapp) p2 (cache) p3 (system) p4 (userdata) p5 (crashdump) p6 (log) p7 (sdcard) p8 (sst)
- <4>[ 2.096313] sr_init: No PMIC hook to init smartreflex
- <6>[ 2.096710] smartreflex smartreflex.0: omap_smartreflex_probe: SmartReflex driver initialized
- <6>[ 2.096862] smartreflex smartreflex.1: omap_smartreflex_probe: SmartReflex driver initialized
- <6>[ 2.096954] smartreflex smartreflex.2: omap_smartreflex_probe: SmartReflex driver initialized
- <7>[ 2.103515] Disabling unused clock "hdq1w_fck"
- <7>[ 2.103546] Disabling unused clock "gpio4_dbclk"
- <7>[ 2.103546] Disabling unused clock "dss_48mhz_clk"
- <6>[ 2.104156] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <3>[ 2.155303] mapping 70000000 to ea000000 (5000000)
- <4>[ 2.441436] regulator_init_complete: incomplete constraints, leaving VAUX2_6030 on
- <4>[ 2.441802] regulator_init_complete: incomplete constraints, leaving VAUX1_6030 on
- <4>[ 2.442199] regulator_init_complete: incomplete constraints, leaving VDAC on
- <4>[ 2.442565] regulator_init_complete: incomplete constraints, leaving VCXIO on
- <4>[ 2.442932] regulator_init_complete: incomplete constraints, leaving VANA on
- <6>[ 2.446075] rtc_read_time: RTC offset read(rtc_offset=0,readsec=1293840129)
- <6>[ 2.446136] twl_rtc twl_rtc: setting system clock to 2011-01-01 00:02:09 UTC (1293840129)
- <6>[ 2.446624] omap_vout omap_vout: : registered and initialized video device 0
- <6>[ 2.446960] omap_vout omap_vout: : registered and initialized video device 1
- <6>[ 2.447296] omap_vout omap_vout: : registered and initialized video device 2
- <6>[ 2.448150] omap_wb: registered and initialized wb device 4 [v4l2]
- <6>[ 2.449676] camera 0-0: >> Probing 0-0
- <6>[ 2.449737] camera_milbeaut_power:OCAM power state set [0x1]
- <6>[ 2.519561] >> milbeaut_probe
- <6>[ 2.559295] << milbeaut_probe
- <3>[ 2.559417] milbeaut 3-001f: this index format not supported.
- <6>[ 2.560638] camera_milbeaut_power:OCAM power state set [0x0]
- <6>[ 2.620574] camera 0-0: << Probing 0-0
- <6>[ 2.621246] camera 0-1: >> Probing 0-1
- <6>[ 2.621337] camera_s5k6aafx_power:ICAM power state set [0x1]
- <4>[ 2.627380] Select Mode : -> fref_clk2_out
- <4>[ 2.627471] ###[ICAM_PowerOn]Read 0x4A10019C (0x41000000)
- <6>[ 2.627532] camera_s5k6aafx_xclk:ICAM xclk freq set [21330000]
- <6>[ 2.652923] >> s5k6aafx_probe
- <6>[ 2.654052] REG_FW version:0x107
- <6>[ 2.654113] REG_HW version:0x6aa
- <6>[ 2.654296] << s5k6aafx_probe
- <6>[ 2.654418] >> fjcam_video_enum_mbus_fmt
- <6>[ 2.654479] << fjcam_video_enum_mbus_fmt
- <6>[ 2.654541] >> fjcam_video_enum_mbus_fmt
- <3>[ 2.654602] s5k6aafx 3-002d: this index format not supported.
- <6>[ 2.654663] >> fjcam_video_enum_mbus_fmt
- <6>[ 2.654724] << fjcam_video_enum_mbus_fmt
- <6>[ 2.654846] >> fjcam_video_enum_mbus_fmt
- <6>[ 2.654907] << fjcam_video_enum_mbus_fmt
- <6>[ 2.655853] >> fjcam_video_g_mbus_fmt
- <6>[ 2.655944] s5k6aafx_get_format(w:1280 x h:1024(size:0x1310720) - 0x00000002)
- <6>[ 2.656066] << fjcam_video_g_mbus_fmt
- <6>[ 2.656158] camera_s5k6aafx_power:ICAM power state set [0x0]
- <6>[ 2.672943] camera_s5k6aafx_xclk:ICAM xclk freq set [0]
- <4>[ 2.673034] Select Mode : abe_clks -> gpio_182
- <4>[ 2.673095] ###[ICAN_PoewrOff]Read 0x4A10019C (0x41000003)
- <6>[ 2.673248] camera 0-1: << Probing 0-1
- <6>[ 2.673339] omap4-camera omap4-camera.0: OMAP4 Camera driver loaded
- <6>[ 2.674652] Freeing init memory: 256K
- <3>[ 2.684112] init: /init.rc select. bootmode=
- <3>[ 2.688751] init: select /init.omap4430.rc
- <3>[ 3.026824] init: cannot open '/initlogo.rle'
- <6>[ 3.108245] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- <6>[ 3.887573] EXT4-fs (mmcblk0p4): recovery complete
- <6>[ 3.892211] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>[ 3.934387] EXT4-fs (mmcblk0p2): recovery complete
- <6>[ 3.942474] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <4>[ 3.996215] EXT4-fs (mmcblk0p1): warning: maximal mount count reached, running e2fsck is recommended
- <6>[ 4.001861] EXT4-fs (mmcblk0p1): recovery complete
- <6>[ 4.004364] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <4>[ 4.052734] EXT4-fs (mmcblk0p6): warning: maximal mount count reached, running e2fsck is recommended
- <6>[ 4.056732] EXT4-fs (mmcblk0p6): recovery complete
- <6>[ 4.061737] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
- <4>[ 4.065307] EXT4-fs (mmcblk0p8): warning: mounting unchecked fs, running e2fsck is recommended
- <6>[ 4.071960] EXT4-fs (mmcblk0p8): mounted filesystem without journal. Opts: (null)
- <6>[ 4.072692] CPUFREQ: Per core ondemand sysfs interface is deprecated - boost
- <6>[ 4.073089] CPUFREQ: Per core ondemand sysfs interface is deprecated - boost_timeout
- <6>[ 4.073455] CPUFREQ: Per core ondemand sysfs interface is deprecated - type
- <4>[ 4.085021] hdcp: module license 'BSD' taints kernel.
- <4>[ 4.085052] Disabling lock debugging due to kernel taint
- <7>[ 4.087036] HDCP: hdcp_init() 3489365443
- <3>[ 4.133117] init: cannot find '/system/bin/ompd', disabling 'omp-daemon'
- <3>[ 4.134613] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- <6>[ 4.206298] enabling adb
- <6>[ 4.223968] adb_open
- <7>[ 4.340515] HDCP: hdcp_ioctl() - QUERY 3489365701
- <6>[ 4.454010] SMC: SecureCRC=0xCFDC2A68
- <6>[ 4.495666] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
- <4>[ 4.498413] fm_drv: module is from the staging directory, the quality is unknown, you have been warned.
- <4>[ 4.509613] gps_drv: module is from the staging directory, the quality is unknown, you have been warned.
- <6>[ 4.641815] fjsec_check_mknod:713: REJECT realpath=/dev/block/vold/179:0
- <6>[ 4.641845] fjsec_path_mknod:1225: r=-1
- <6>[ 4.643432] fjsec_check_mknod:713: REJECT realpath=/dev/block/vold/179:3
- <6>[ 4.643432] fjsec_path_mknod:1225: r=-1
- <6>[ 4.646392] fjsec_check_mknod:713: REJECT realpath=/dev/block/vold/259:0
- <6>[ 4.646423] fjsec_path_mknod:1225: r=-1
- <6>[ 4.719818] omap-remoteproc omap-remoteproc.0: omap_rproc_open: dev num 0, name tesla, count 1
- <6>[ 4.719848] omap-remoteproc omap-remoteproc.1: omap_rproc_open: dev num 1, name ducati-proc0, count 1
- <6>[ 4.719909] omap-remoteproc omap-remoteproc.2: omap_rproc_open: dev num 2, name ducati-proc1, count 1
- <3>[ 4.720092] platform_mem_setup : status [0x0]
- <3>[ 4.720123] platform_setup : status [0x0]
- <3>[ 4.720123] proc_mgr_setup : status [0x0]
- <3>[ 4.720153] sharedregion_setup : status [0x0]
- <6>[ 4.720153] omap mailbox rev 0.0
- <3>[ 4.720214] notify_ducatidrv_setup : status [0x0]
- <3>[ 4.720214] notify_setup : status [0x0]
- <6>[ 4.728759] SMC PA: INFO 00000001 00:00:00.000 ------ ------ --------------- Booting... (t=00:02:11.779) SMCXG01.04p9.31740 /c81300 fics+dx+ss+sd+n
- <6>[ 4.728820] SMC PA: INFO 00000002 00:00:00.000 ------ ------ --------------- vpub
- <6>[ 4.730072] SMC PA: INFO 00000003 00:00:00.001 P-0005 T-000B DX_CPRM_TOOLKIT SSPICreate Nov 1 2011 14:17:03 OMAP4
- <6>[ 4.730163] SMC PA: INFO 00000004 00:00:00.001 ------ ------ --------------- Booted
- <3>[ 4.730804] ipu_pm_setup : status [0x0]
- <3>[ 4.730804] nameserver_setup : status [0x0]
- <3>[ 4.730834] nameserver_get_handle failed! status = 0xfffffffe
- <3>[ 4.730834] gatemp_setup : status [0x0]
- <3>[ 4.730865] gatepeterson_setup : status [0x0]
- <3>[ 4.730895] nameserver_get_handle failed! status = 0xfffffffe
- <3>[ 4.730895] messageq_setup : status [0x0]
- <3>[ 4.730895] nameserver_get_handle failed! status = 0xfffffffe
- <3>[ 4.730926] heapbufmp_setup : status [0x0]
- <3>[ 4.730926] nameserver_get_handle failed! status = 0xfffffffe
- <3>[ 4.730957] heapmemmp_setup : status [0x0]
- <3>[ 4.730957] nameserver_get_handle failed! status = 0xfffffffe
- <3>[ 4.730987] listmp_setup : status [0x0]
- <3>[ 4.730987] transportshm_setup : status [0xa7a000]
- <3>[ 4.730987] nameserver_remotenotify_setup : status [0x0]
- <3>[ 4.731109] _platform_setup : status [0x0]
- <6>[ 4.731262] omap-remoteproc omap-remoteproc.0: omap_rproc_open: dev num 0, name tesla, count 1
- <6>[ 4.731292] omap-remoteproc omap-remoteproc.1: omap_rproc_open: dev num 1, name ducati-proc0, count 1
- <6>[ 4.731323] omap-remoteproc omap-remoteproc.2: omap_rproc_open: dev num 2, name ducati-proc1, count 1
- <6>[ 4.800750] android_usb gadget: high speed config #1: android
- <4>[ 4.868774] function.disabled = 1
- <4>[ 4.868804] function.disabled = 1
- <4>[ 4.868804] function.disabled = 1
- <0>[ 4.868835] (drivers/usb/gadget/f_mass_storage.c:fsg_setup:662) 0 0 7
- <3>[ 4.954742] init: untracked pid 1675 exited
- <4>[ 5.257171] omap_hwmod: ipu: failed to reset in 10000 usec
- <6>[ 5.257232] omap-iommu omap-iommu.0: ducati: version 2.1
- <3>[ 5.257751] proc4430_attach num_mem_entries = 6
- <6>[ 5.258361] proc_mgr_attach:proc_mgr_handle->num_mem_entries = 6
- <3>[ 5.259582] proc4430_attach num_mem_entries = 6
- <6>[ 5.259765] proc_mgr_attach:proc_mgr_handle->num_mem_entries = 6
- <3>[ 5.316986] _platform_read_slave_memory successful! status = 0x0, proc_id = 2, addr = 0xcc80, m_addr = 0xe980cc80, size = 0x20
- <3>[ 5.317077] _platform_read_slave_memory successful! status = 0x0, proc_id = 2, addr = 0xcca0, m_addr = 0xe980cca0, size = 0x30
- <3>[ 5.322875] _platform_write_slave_memory successful! status = 0x0, proc_id = 2, addr = 0xcc80, m_addr = 0xe980cc80, size = 0x20
- <6>[ 5.323242] omap-remoteproc omap-remoteproc.1: omap_rproc_ioctl
- <3>[ 5.325500] ipc_proc_sync_start failed: status [0xffffffff]
- <3>[ 5.325531] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
- <3>[ 5.325561] ipc_attach failed! status = 0xffffffff
- <3>[ 5.340911] ipc_proc_sync_start failed: status [0xffffffff]
- <3>[ 5.340942] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
- <3>[ 5.340942] ipc_attach failed! status = 0xffffffff
- <3>[ 5.356536] ipc_proc_sync_start done
- <3>[ 5.356567] ipc_proc_sync_start : status [0x0]
- <3>[ 5.356597] gatemp_attach : status [0x0]
- <3>[ 5.356597] sharedregion_attach : status [0x0]
- <3>[ 5.356628] sharedregion_get_ptr : status [0x0]
- <3>[ 5.356658] notify_attach : status [0x0]
- <3>[ 5.356719] ipu_pm_attach : status [0x0]
- <3>[ 5.356719] sharedregion_get_ptr : status [0x0]
- <3>[ 5.356750] nameserver_remotenotify_attach : status [0x0]
- <3>[ 5.356781] sharedregion_get_ptr : status [0x0]
- <3>[ 5.356811] messageq_attach : status [0x0]
- <3>[ 5.356842] ipc_proc_sync_finish : status [0x0]
- <3>[ 5.982696] _platform_read_slave_memory successful! status = 0x0, proc_id = 1, addr = 0x384c80, m_addr = 0xe9e84c80, size = 0x20
- <3>[ 5.982788] _platform_read_slave_memory successful! status = 0x0, proc_id = 1, addr = 0x384ca0, m_addr = 0xe9e84ca0, size = 0x30
- <3>[ 5.982818] _platform_write_slave_memory successful! status = 0x0, proc_id = 1, addr = 0x384c80, m_addr = 0xe9e84c80, size = 0x20
- <6>[ 5.982910] omap-remoteproc omap-remoteproc.2: omap_rproc_ioctl
- <3>[ 5.984252] ipc_proc_sync_start failed: status [0xffffffff]
- <3>[ 5.984283] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
- <3>[ 5.984313] ipc_attach failed! status = 0xffffffff
- <3>[ 5.997192] ipc_proc_sync_start failed: status [0xffffffff]
- <3>[ 5.997222] ipc_attach : ipc_proc_sync_start failed [0xffffffff]
- <3>[ 5.997253] ipc_attach failed! status = 0xffffffff
- <3>[ 6.012786] ipc_proc_sync_start done
- <3>[ 6.012817] ipc_proc_sync_start : status [0x0]
- <3>[ 6.012847] gatemp_attach : status [0x1]
- <3>[ 6.012878] sharedregion_attach : status [0x0]
- <3>[ 6.012908] sharedregion_get_ptr : status [0x0]
- <3>[ 6.012939] notify_attach : status [0x0]
- <3>[ 6.013000] ipu_pm_attach : status [0x0]
- <3>[ 6.013031] sharedregion_get_ptr : status [0x0]
- <3>[ 6.013061] nameserver_remotenotify_attach : status [0x0]
- <3>[ 6.013061] sharedregion_get_ptr : status [0x0]
- <3>[ 6.013122] messageq_attach : status [0x0]
- <3>[ 6.013153] ipc_proc_sync_finish : status [0x0]
- <6>[ 6.035369] Registered user-space process for DEV_SYS_ERROR event in SysM3
- <6>[ 6.035461] Registered user-space process for DEV_WATCHDOG_ERROR event in SysM3
- <6>[ 6.035552] Registered user-space process for DEV_SYS_ERROR event in AppM3
- <6>[ 6.035644] Registered user-space process for DEV_WATCHDOG_ERROR event in AppM3
- <6>[ 6.715820] SMC PA: INFO 00000005 00:00:01.987 P-0001 T-0009 System --------- Mounting partition 0...
- <6>[ 6.724060] SMC PA: INFO 00000006 00:00:01.994 P-0001 T-0009 System --------- File system mounted successfully in partition 0
- <6>[ 6.724456] SMC PA: ERR 00000007 00:00:01.996 P-001B T-001F nvpub_s -------- CLIENT PROPERTIES:
- <6>[ 6.725067] SMC PA: ERR 00000008 00:00:01.996 P-001B T-001F nvpub_s -------- SEC:NV: KEK TEST PA [00000000]
- <6>[ 6.725738] SMC PA: ERR 00000009 00:00:01.997 P-001B T-001F nvpub_s -------- func::nv_cryptservice_exit-s
- <6>[ 6.725830] SMC PA: ERR 00000010 00:00:01.997 P-001B T-001F nvpub_s -------- func::nv_cryptservice_exit-e
- <6>[ 7.049316] SMC PA: INFO 00000011 00:00:02.320 P-0001 T-0009 System --------- Mounting partition 1...
- <6>[ 7.052520] SMC PA: INFO 00000012 00:00:02.322 P-0001 T-0009 System --------- File system mounted successfully in partition 1
- <6>[ 9.518218] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- <6>[ 10.984161] SMC PA: INFO 00000013 00:00:06.255 P-0001 T-0009 System --------- Mounting partition 2...
- <6>[ 10.991241] SMC PA: INFO 00000014 00:00:06.259 P-0001 T-0009 System --------- File system mounted successfully in partition 2
- <6>[ 13.974487] Sleep APPM3
- <6>[ 13.974548] Sleep SYSM3
- <6>[ 19.532135] omap_wdt: set watchdog timer, timeout=120sec
- <6>[ 19.618621] led_brightness_store:color=0x00000000, blink=0
- <6>[ 19.628540] led_brightness_store:color=0x00000000, blink=0
- <6>[ 19.817016] TIWLAN: driver init
- <6>[ 19.817749] TI WiLink 1283 SDIO: Driver loaded
- <6>[ 19.842987] wifi_probe: got wlan irq 187
- <6>[ 19.843017] wifi_probe: got wlan irq trigger falling flag
- <4>[ 19.849609] sdp4430_wifi_set_carddetect: 0
- <7>[ 19.849639] mmc2: card_present 0
- <4>[ 19.849792] sdp4430_wifi_reset: 1
- <4>[ 19.849792] sdp4430_wifi_power: 0
- <3>[ 19.860748] init: no such service 'tiwl_chk_ch'
- <6>[ 20.003112] TIWLAN: 2723.970435: pInitParams->RoamingScanning_2_4G_enable 0
- <4>[ 20.003234] sdp4430_wifi_power: 1
- <4>[ 20.017578] sdp4430_wifi_power: 0
- <4>[ 20.018524] sdp4430_wifi_power: 1
- <4>[ 20.107879] sdp4430_wifi_reset: 0
- <4>[ 20.107910] sdp4430_wifi_set_carddetect: 1
- <7>[ 20.108032] mmc2: card_present 1
- <4>[ 20.367156] mmc2: card claims to support voltages below the defined range. These will be ignored.
- <6>[ 20.369262] mmc2: new high speed SDIO card at address 0001
- <6>[ 20.371368] TIWLAN: Found TI/WLAN SDIO controller (vendor 0x97, device 0x4076, class 0x7)
- <4>[ 20.371856] sdioAdapt_ConnectBus(): Block-Size should be bigger than SYNC_ASYNC_LENGTH_THRESH!!
- <6>[ 20.372711] TIWLAN: 2724.340033: Working on a 1283 PG 2.0 board.
- <6>[ 20.400604] TIWLAN: 2724.367926: Starting to process NVS...
- <6>[ 20.400634] TIWLAN: 2724.367957: NVS found, EEPROM Image addr=0xe5103200, EEPROM Len=0x0x1d4
- <6>[ 20.413604] TIWLAN: 2724.380896: Firmware successfully downloaded.
- <6>[ 20.413604] TIWLAN: 2724.380927: FW download OK...
- <6>[ 20.416748] TIWLAN: 2724.384039: Firmware successfully downloaded.
- <6>[ 20.416748] TIWLAN: 2724.384070: FW download OK...
- <6>[ 20.416992] TIWLAN: 2724.384314: Firmware successfully downloaded.
- <6>[ 20.417175] TIWLAN: 2724.384497: FW download OK...
- <6>[ 20.418304] TIWLAN: 2724.385596: Firmware successfully downloaded.
- <6>[ 20.418304] TIWLAN: 2724.385626: FW download OK...
- <6>[ 20.419403] TIWLAN: 2724.386725: Firmware successfully downloaded.
- <6>[ 20.419433] TIWLAN: 2724.386755: FW download OK...
- <6>[ 20.419769] TIWLAN: 2724.387091: Finished downloading firmware.
- <6>[ 20.419799] TIWLAN: 2724.387122: Firmware running.
- <6>[ 20.433166] TIWLAN: 2724.400488: Firmware successfully downloaded.
- <6>[ 20.433197] TIWLAN: 2724.400519: FW download OK...
- <6>[ 20.433288] TIWLAN: 2724.400610:
- <6>[ 20.433319] TIWLAN: 2724.400610: --------------------------------------------------------------------
- <6>[ 20.433319] TIWLAN: 2724.400641: Driver Version : MCP-WiLink_Driver_2.5.3.0.18
- <6>[ 20.433319] TIWLAN: 2724.400641: Firmware Version: Rev 7.1.3.25.54
- <6>[ 20.433349] TIWLAN: 2724.400671: Station ID : B0-99-28-75-85-DD
- <6>[ 20.433349] TIWLAN: 2724.400671: --------------------------------------------------------------------
- <6>[ 20.433380] TIWLAN: 2724.400671:
- <6>[ 20.435577] TIWLAN: 2724.402899: cmdBld_CfgIeGenFwCmd: bytes 00..07 = 00, 00, 00, 00, 00, 00, 00, 00
- <6>[ 20.435607] TIWLAN: 2724.402930: cmdBld_CfgIeGenFwCmd: bytes 08..15 = 00, 00, 00, 00, 00, 00, 00, 00
- <6>[ 20.435699] TIWLAN: 2724.403021: cmdBld_CfgIeHostIfCfgBitmap: Value = 0x9
- <6>[ 20.444519] TIWLAN: 2724.411810: Interrogate TX/RX parameters
- <6>[ 20.830657] ADDRCONF(NETDEV_UP): tiwlan0: link is not ready
- <6>[ 21.612060] led_brightness_store:color=0x00000000, blink=0
- <6>[ 21.633789] led_brightness_store:color=0x00000000, blink=0
- <0>[ 22.243225] <system_server> killed by <ConnectivityThr>
- <0>[ 22.243286] crashdump_app
- <6>[ 23.146697] binder: send failed reply for transaction 2150 to 1872:1872
- <6>[ 23.146728] binder: send failed reply for transaction 2155 to 1854:1854
- <6>[ 23.146728] binder: send failed reply for transaction 2158 to 1938:1938
- <6>[ 23.146759] binder: send failed reply for transaction 2163 to 1972:1972
- <6>[ 23.146759] binder: send failed reply for transaction 2166 to 1921:1945
- <6>[ 23.146789] binder: send failed reply for transaction 2167 to 1875:1875
- <3>[ 23.146789] binder: release proc 1755, transaction 2151, not freed
- <0>[ 23.147094] <bootanimation> killed by <Binder Thread #>
- <0>[ 23.147125] crashdump_app
- <6>[ 23.150115] binder: 1872:1872 transaction failed 29189, size 108-4
- <6>[ 23.151031] binder: 1872:1872 transaction failed 29189, size 124-0
- <0>[ 23.153137] <e.process.gapps> killed by <e.process.gapps>
- <0>[ 23.153167] crashdump_app
- <6>[ 23.154418] binder: 1854:1854 transaction failed 29189, size 3456-4
- <0>[ 23.155059] <ndroid.systemui> killed by <ndroid.systemui>
- <0>[ 23.155090] crashdump_app
- <6>[ 23.172698] binder: 1872:1872 transaction failed 29189, size 236-0
- <6>[ 23.211914] ADDRCONF(NETDEV_CHANGE): tiwlan0: link becomes ready
- <6>[ 23.252105] binder: 1875:1933 transaction failed 29189, size 152-0
- <6>[ 23.253051] TIWLAN: 2727.220374: connInfra , CONSOLE:************ NEW CONNECTION ************
- <6>[ 23.253082] TIWLAN: 2727.220404: ************ NEW CONNECTION ************
- <6>[ 23.253082] TIWLAN: 2727.220404: siteMgr , CONSOLE:-- BSSID = 00-26-87-01-2b-62
- <6>[ 23.253112] TIWLAN: 2727.220435: -- SSID = 002687012B63
- <6>[ 23.253112] TIWLAN: 2727.220435: -- BSSID = 00-26-87-01-2b-62
- <6>[ 23.253143] TIWLAN: 2727.220465: -- MODE = infrastructure
- <6>[ 23.253143] TIWLAN: 2727.220465: connInfra , CONSOLE:****************************************
- <6>[ 23.253143] TIWLAN: 2727.220465: ****************************************
- <6>[ 23.310241] alarm_release: clear alarm, pending 0
- <6>[ 23.310272] alarm_release: clear alarm, pending 0
- <6>[ 23.310272] alarm_release: clear alarm, pending 0
- <2>[ 23.310455] omap_wdt: Unexpected close, not stopping!
- <6>[ 23.325042] binder: 1875:1875 transaction failed 29189, size 96-4
- <6>[ 23.327575] binder: 1875:1875 transaction failed 29189, size 68-0
- <6>[ 23.352294] binder: 1875:1875 transaction failed 29189, size 1736-4
- <0>[ 23.354248] <droid.paletteui> killed by <droid.paletteui>
- <0>[ 23.354278] crashdump_app
- <0>[ 23.608581] <zygote> killed by <zygote>
- <0>[ 23.608673] crashdump_app
- <3>[ 23.759765] init: untracked pid 1926 exited
- <3>[ 23.785339] init: untracked pid 1972 exited
- <3>[ 23.787902] init: untracked pid 1921 exited
- <3>[ 23.788208] init: untracked pid 1946 exited
- <3>[ 23.788482] init: untracked pid 1874 exited
- <3>[ 23.789215] init: untracked pid 1862 exited
- <3>[ 23.790069] init: untracked pid 1872 exited
- <3>[ 23.792755] init: untracked pid 1911 exited
- <3>[ 23.801635] init: untracked pid 1877 exited
- <6>[ 24.243621] omap_wdt: set watchdog timer for reboot/panic, timeout=45sec
- <0>[ 24.475006] Restarting system with command 'warm'.
- <4>[ 24.475036] Disabling non-boot CPUs ...
- <5>[ 24.511077] CPU1: shutdown
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement