API tools faq
paste
Advertisement
Guest User

CPE210v2 boot log

a guest
Aug 2nd, 2017
758
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.00 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.1.4-g30d8afa8-dirty (Nov 1 2016 - 1·:38:0µ)
  2.  
  3. ap143-2.0 - Honey Bee 2.0
  4.  
  5. DRAM: 64 MB
  6. Flash Manuf Id 0xc8, DeviceId0 0x40, DeviãeId1 0x17
  7. flash size 8MB, sector count = 128
  8. Flash: 8 MB
  9. Using default environment
  10.  
  11. In:   serial
  12. Out: serial
  13. Err: serial
  14. Net: ath_gmac_enet_initialize...
  15. ath_gmac_enet_initialize: reset mask:c02200
  16. Scorpion ---->S27 PHY*
  17. S27 reg init
  18. : cfg1 0x800c0000 cfg2 0x7114
  19. eth0: ba:be:fa:ce:08:41
  20. 㠊athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10
  21. eth0 up
  22. Honey Bee ---->  MAC 1 S27 PHY *
  23. S27 reg init
  24. ATHRS27: resetting s27
  25. ATHRS27: s27 reset done
  26. : cfg1 0x800c0000 cfg2 0x7214
  27. athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000
  28. athrs27_phy_setup ATHR_PHÙ_SPEC_STAUS 0 :10
  29. athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000
  30. áthrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10
  31. athrs27_phy_setup ATHR_PHÙ_CONTROL 2 :1000
  32. athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10
  33. athrs2ٷ_phy_setup ATHR_PHY_CONTROL 3 :1000
  34. athrs27_phy_setup ATHR_PHY_SPEC_ÓTAUS 3 :10
  35. eth1 up
  36. eth0, eth1Ӎ
  37. Setting 0x181162c0 to 0x4081a100
  38. is butôon pressed? 0
  39. Autobooting in 1 seconds
  40. ## Booting image at 9f040000 ...
  41. Uncompressing Kernel Image ... OK
  42.  
  43. Starting kernel ...
  44.  
  45. Booting QCA953x
  46. Linux version 2.6.31 (jenkins@sohoiapbuild) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Mon Oct 31 15:53:49 CST 2016
  47. flash_size passed from bootloader = 8
  48. CPU revision is: 00019374 (MIPS 24Kc)
  49. ath_sys_frequency: cpu apb ddr apb cpu 650 ddr 392 ahb 216
  50. Determined physical RAM map:
  51. memory: 02000000 @ 00000000 (usable)
  52. User-defined physical RAM map:
  53. memory: 04000000 @ 00000000 (usable)
  54. Zone PFN ranges:
  55. Normal 0x00000000 -> 0x00004000
  56. Movable zone start PFN for each node
  57. early_node_map[1] active PFN ranges
  58. 0: 0x00000000 -> 0x00004000
  59. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  60. Kernel command line: console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/init mtdparts=ath-nor0:128k(u-boot),64M
  61. PID hash table entries: 256 (order: 8, 1024 bytes)
  62. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  63. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  64. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  65. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  66. Writing ErrCtl register=00000000
  67. Readback ErrCtl register=00000000
  68. Memory: 62400k/65536k available (1832k kernel code, 3068k reserved, 473k data, 112k init, 0k highmem)
  69. Hierarchical RCU implementation.
  70. NR_IRQS:128
  71. plat_time_init: plat time init done
  72. Calibrating delay loop... 432.12 BogoMIPS (lpj=864256)
  73. Mount-cache hash table entries: 512
  74. NET: Registered protocol family 16
  75. bio: create slab <bio-0> at 0
  76. NET: Registered protocol family 2
  77. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  78. net_link: create socket ok.
  79. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  80. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  81. TCP: Hash tables configured (established 2048 bind 2048)
  82. TCP reno registered
  83. NET: Registered protocol family 1
  84. ATH GPIOC major 0
  85. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  86. NTFS driver 2.1.29 [Flags: R/O].
  87. msgmni has been set to 122
  88. alg: No test for lzma (lzma-generic)
  89. alg: No test for stdrng (krng)
  90. io scheduler noop registered
  91. io scheduler anticipatory registered
  92. io scheduler deadline registered
  93. io scheduler cfq registered (default)
  94. Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  95. serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
  96. console [ttyS0] enabled
  97. PPP generic driver version 2.4.2
  98. NET: Registered protocol family 24
  99. 7 cmdlinepart partitions found on MTD device ath-nor0
  100. Creating 7 MTD partitions on "ath-nor0":
  101. 0x000000000000-0x000000020000 : "u-boot"
  102. 0x000000020000-0x000000030000 : "pation-table"
  103. 0x000000030000-0x000000040000 : "product-info"
  104. 0x000000040000-0x0000001c0000 : "kernel"
  105. 0x0000001c0000-0x0000007c0000 : "rootfs"
  106. 0x0000007c0000-0x0000007f0000 : "config"
  107. 0x0000007f0000-0x000000800000 : "ART"
  108. TCP cubic registered
  109. NET: Registered protocol family 17
  110. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  111. All bugs added by David S. Miller <davem@redhat.com>
  112. athwdt_init: Registering WDT success
  113. athwdt_timer_init: Starting WDT.
  114. VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  115. Freeing unused kernel memory: 112k freed
  116. init started: BusyBox v1.01 (2016.10.31-07:54+0000) multi-call binary
  117. This Board use 2.6.31
  118. xt_time: kernel timezone is -0000
  119. nf_conntrack version 0.5.0 (1024 buckets, 30720 max)
  120. ip_tables: (C) 2000-2006 Netfilter Core Team
  121. iptable_raw: version magic '2.6.31-gbb45668-dirty preempt mod_unload MIPS32_R2 32BIT ' should be '2.6.31 preempt mod_'
  122. insmod: cannot insert `/lib/modules/2.6.31/kernel/iptable_raw.ko': Invalid module format (-1): Exec format error
  123.  
  124. Register vlan_manage hooks success.
  125. PPPoL2TP kernel driver, V1.0
  126. PPTP driver version 0.8.3
  127. WARN: TDB not supported!
  128. WARN: TDB not supported!
  129.  
  130. (none) mips #1 PREEMPT Mon Oct 31 15:53:49 CST 2016 (none)
  131. (none) login: httpMudCreate: MUD 0x659120 was created
  132. [info @ initModelParameters:205] init profile...
  133.  
  134. qca95xx_GMAC: Length per segment 1536
  135. 953x_GMAC: qca953x_gmac_attach
  136. Link Int Enabled
  137. qca953x_set_gmac_caps CHECK DMA STATUS
  138. mac:0 Registering S27....
  139. qca95xx_GMAC: RX TASKLET - Pkts per Intr:18
  140. qca95xx_GMAC: RX TASKLET - Timer Freq r:376
  141. qca95xx_GMAC: RX TASKLET - Rx Desc :128
  142. qca95xx_GMAC: Mac address for unit 0:bfff0000
  143. qca95xx_GMAC: ff:ff:ff:ff:ff:ff
  144. qca95xx_GMAC: Max segments per packet : 1
  145. qca95xx_GMAC: Max tx descriptor count : 128
  146. qca95xx_GMAC: Max rx descriptor count : 128
  147. qca95xx_GMAC: Mac capability flags : 3581
  148. 953x_GMAC: qca953x_gmac_attach
  149. Link Int Enabled
  150. qca953x_set_gmac_caps CHECK DMA STATUS
  151. mac:1 Registering S27....
  152. qca95xx_GMAC: RX TASKLET - Pkts per Intr:18
  153. qca95xx_GMAC: RX TASKLET - Timer Freq r:376
  154. qca95xx_GMAC: RX TASKLET - Rx Desc :128
  155. qca95xx_GMAC: Mac address for unit 1:bfff0006
  156. qca95xx_GMAC: ff:ff:ff:ff:ff:ff
  157. qca95xx_GMAC: Max segments per packet : 1
  158. qca95xx_GMAC: Max tx descriptor count : 128
  159. qca95xx_GMAC: Max rx descriptor count : 128
  160. qca95xx_GMAC: Mac capability flags : 3D81
  161. device eth0 entered promiscuous mode
  162. device eth1 entered promiscuous mode
  163. athr_gmac_ring_alloc Allocated 2048 at 0x83a5a800
  164. athr_gmac_ring_alloc Allocated 2048 at 0x83a5a000
  165. HONEYBEE ----> S27 PHY MDIO
  166. Setting Drop CRC Errors, Pause Frames and Length Error frames
  167. Setting PHY...
  168. 953x_GMAC: Enet Unit:0 PHY:4 is UP eth0 MII 100Mbps full duplex
  169. 953x_GMAC: done cfg2 0x7115 ifctl 0x10000 miictrl
  170. Setting Drop CRC Errors, Pause Frames and Length Error frames
  171. athr_gmac_ring_alloc Allocated 2048 at 0x83ad0800
  172. athr_gmac_ring_alloc Allocated 2048 at 0x83ad0000
  173. HONEYBEE ----> S27 PHY MDIO
  174. ATHRS27: resetting s27
  175. ATHRS27: s27 reset done
  176. Setting Drop CRC Errors, Pause Frames and Length Error frames
  177. Setting PHY...
  178. br0: port 1(eth0) entering forwarding state
  179.  
  180. Disable VlanManage, data.enable(0), data.vid(0)
  181. rmmod: br_dhcp_filter.ko: No such file or directory
  182. [dhcpcKill:643]error: dhcpc status:3
  183. command not supported
  184. adf: module license 'Proprietary' taints kernel.
  185. Disabling lock debugging due to kernel taint
  186. ath_hal: 0.9.17.1 (AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
  187. ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  188. ath_spectral: Version 2.0.0
  189. Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
  190. SPECTRAL module built on Oct 31 2016 15:58:32
  191. ath_dfs: Version 2.0.0
  192. Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  193. ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  194. ath_ahb: 9.5.2.18 (Atheros/multi-bss)
  195. Enterprise mode: 0x03fc0000
  196. Restoring Cal data from Flash
  197. ar9300_convert_eeprom templateVersion = 82
  198. ath_get_caps[6209] rx chainmask mismatch actual 3 sc_chainmak 0
  199. ath_get_caps[6184] tx chainmask mismatch actual 3 sc_chainmak 0
  200. wifi0: Atheros ???: mem=0xb8100000, irq=2
  201. ath_pci: 9.5.2.18 (Atheros/multi-bss)
  202. dfs is NULL dfs_init_radar_filtersInterface doesn't accept private ioctl...
  203. HALDbg (8BE0): Operation not permitted
  204. ieee80211_wifipos_vattach: 3512: Wifipos intialization starting
  205. ieee80211_wifipos_vattach: 3525: Wifipos intialization mem alloc complete
  206. ieee80211_wifipos_vattach: 3555: Wifipos intialization sock alloc complete
  207. ieee80211_wifipos_vattach: 3609: Wifipos intialization time alloc complete
  208. ieee80211_wifipos_vattach: 3628: Wifipos intialization data store 1 alloc complete
  209. ieee80211_wifipos_vattach: 3638: Wifipos intialization data store 2 alloc complete
  210. ieee80211_wifipos_vattach: 3652: Wifipos intialization complete
  211. VAP device ath0 created
  212. ath0
  213. dfs is NULL dfs_init_radar_filtersath0 tdmaswitch:0
  214.  
  215. device ath0 entered promiscuous mode
  216. br0: port 3(ath0) entering forwarding state
  217. Scan in progress.. Cancelling it
  218. br0: port 3(ath0) entering disabled state
  219. br0: port 3(ath0) entering forwarding state
  220. insmod: cannot insert `/lib/modules/2.6.31/kernel/nf_conntrack_proto_gre.ko': File exists (-1): File exists
  221. httpServerCreate: try to add port 80
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!