API tools faq
paste
Guest User

Pi Lite commands

a guest
Aug 31st, 2020
2,410
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.78 KB | None | 0 0
raw download clone embed print report
  1. pi@FS20080016H:~$ sudo vcdbg log msg
  2. 002179.679: brfs: File read: /mfs/sd/config.txt
  3. 002180.856: brfs: File read: 1862 bytes
  4. 002258.442: brfs: File read: /mfs/sd/config.txt
  5. 002259.614: gpioman: gpioman_get_pin_num: pin DISPLAY_SDA not defined
  6. 002259.689: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  7. 002269.952: gpioman: gpioman_get_pin_num: pin BT_ON not defined
  8. 002270.018: gpioman: gpioman_get_pin_num: pin WL_ON not defined
  9. 002304.834: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  10. 002304.928: *** Restart logging
  11. 002304.991: brfs: File read: 1862 bytes
  12. 002335.878: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  13. 002336.752: gpioman: gpioman_get_pin_num: pin CAMERA_0_SDA_PIN not defined
  14. 002336.821: gpioman: gpioman_get_pin_num: pin CAMERA_0_SCL_PIN not defined
  15. 002336.890: gpioman: gpioman_get_pin_num: pin CAMERA_0_I2C_PORT not defined
  16. 002342.784: brfs: File read: /mfs/sd/bcm2710-rpi-cm3.dtb
  17. 002342.849: Loading 'bcm2710-rpi-cm3.dtb' to 0x100 size 0x62ce
  18. 002543.137: brfs: File read: 25294 bytes
  19. 002545.015: brfs: File read: /mfs/sd/config.txt
  20. 002545.587: dtparam: i2c_arm=off
  21. 002569.877: dtparam: audio=on
  22. 002599.601: brfs: File read: 1862 bytes
  23. 002600.189: brfs: File read: /mfs/sd/cmdline.txt
  24. 002600.306: Read command line from file 'cmdline.txt':
  25. 002600.377: 'console=serial0,115200 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline console=tty3 fsck.repair=yes rootwait logo.nologo vt.global_cursor_default=0 loglevel=3 consoleblank=0 plymouth.ignore-serial-consoles splash quiet'
  26. 004513.254: gpioman: gpioman_get_pin_num: pin WL_ON not defined
  27. 004528.222: brfs: File read: 231 bytes
  28. 005016.332: brfs: File read: /mfs/sd/kernel7.img
  29. 005016.396: Loading 'kernel7.img' to 0x8000 size 0x52c4f8
  30. 005016.467: Device tree loaded to 0x2eff9800 (size 0x673f)
  31. 005018.259: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
  32. 006347.446: vchiq_core: vchiq_init_state: slot_zero = 0xfad80000, is_master = 1
  33. 006352.196: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  34. 006357.955: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000052
  35. 009985.674: brfs: File read: 5424376 bytes
  36. 009990.840: gpioman: gpioman_get_pin_num: pin FLASH_0_ENABLE not defined
  37. 009990.918: gpioman: gpioman_get_pin_num: pin FLASH_0_INDICATOR not defined
  38. 009991.022: gpioman: gpioman_get_pin_num: pin FLASH_0_ENABLE not defined
  39. 009991.094: gpioman: gpioman_get_pin_num: pin FLASH_0_INDICATOR not defined
  40.  
  41.  
  42. ----------------------------------------------------------------------------------------------------------------------------------
  43.  
  44. pi@FS20080016H:~$ raspi-gpio
  45. No arguments given - try "raspi-gpio help"
  46.  
  47.  
  48. ----------------------------------------------------------------------------------------------------------------------------------
  49.  
  50.  
  51. pi@FS20080016H:~$ dmesg
  52. [ 0.000000] Booting Linux on physical CPU 0x0
  53. [ 0.000000] Linux version 4.19.97-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1294 SMP Thu Jan 30 13:15:58 GMT 2020
  54. [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  55. [ 0.000000] CPU: div instructions available: patching division code
  56. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  57. [ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Plus Rev 1.0
  58. [ 0.000000] Memory policy: Data cache writealloc
  59. [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
  60. [ 0.000000] On node 0 totalpages: 242688
  61. [ 0.000000] Normal zone: 2133 pages used for memmap
  62. [ 0.000000] Normal zone: 0 pages reserved
  63. [ 0.000000] Normal zone: 242688 pages, LIFO batch:63
  64. [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0
  65. [ 0.000000] percpu: Embedded 16 pages/cpu s36864 r8192 d20480 u65536
  66. [ 0.000000] pcpu-alloc: s36864 r8192 d20480 u65536 alloc=16*4096
  67. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  68. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
  69. [ 0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:B1:78:67 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline console=tty3 fsck.repair=yes rootwait logo.nologo vt.global_cursor_default=0 loglevel=3 consoleblank=0 plymouth.ignore-serial-consoles splash quiet
  70. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  71. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  72. [ 0.000000] Memory: 939084K/970752K available (8192K kernel code, 653K rwdata, 2220K rodata, 1024K init, 822K bss, 23476K reserved, 8192K cma-reserved)
  73. [ 0.000000] Virtual kernel memory layout:
  74. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  75. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  76. vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
  77. lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
  78. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  79. .text : 0x(ptrval) - 0x(ptrval) (9184 kB)
  80. .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  81. .data : 0x(ptrval) - 0x(ptrval) ( 654 kB)
  82. .bss : 0x(ptrval) - 0x(ptrval) ( 823 kB)
  83. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  84. [ 0.000000] ftrace: allocating 26860 entries in 79 pages
  85. [ 0.000000] rcu: Hierarchical RCU implementation.
  86. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  87. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  88. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  89. [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  90. [ 0.000020] Switching to timer-based delay loop, resolution 52ns
  91. [ 0.000275] Console: colour dummy device 80x30
  92. [ 0.000295] console [tty3] enabled
  93. [ 0.000337] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  94. [ 0.000351] pid_max: default: 32768 minimum: 301
  95. [ 0.000691] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  96. [ 0.000707] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  97. [ 0.001657] CPU: Testing write buffer coherency: ok
  98. [ 0.002121] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  99. [ 0.002778] Setting up static identity map for 0x100000 - 0x10003c
  100. [ 0.002931] rcu: Hierarchical SRCU implementation.
  101. [ 0.003735] smp: Bringing up secondary CPUs ...
  102. [ 0.004626] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  103. [ 0.005614] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  104. [ 0.006526] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  105. [ 0.006649] smp: Brought up 1 node, 4 CPUs
  106. [ 0.006661] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  107. [ 0.006666] CPU: All CPU(s) started in HYP mode.
  108. [ 0.006671] CPU: Virtualization extensions available.
  109. [ 0.007645] devtmpfs: initialized
  110. [ 0.020693] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  111. [ 0.020930] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  112. [ 0.020949] futex hash table entries: 1024 (order: 4, 65536 bytes)
  113. [ 0.021538] pinctrl core: initialized pinctrl subsystem
  114. [ 0.022407] NET: Registered protocol family 16
  115. [ 0.025570] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  116. [ 0.031429] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  117. [ 0.031437] hw-breakpoint: maximum watchpoint size is 8 bytes.
  118. [ 0.031635] Serial: AMBA PL011 UART driver
  119. [ 0.033971] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  120. [ 0.050040] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-02-12 12:38, variant start
  121. [ 0.060053] raspberrypi-firmware soc:firmware: Firmware hash is 53a54c770c493957d99bf49762dfabc4eee00e45
  122. [ 0.103347] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  123. [ 0.104981] SCSI subsystem initialized
  124. [ 0.105203] usbcore: registered new interface driver usbfs
  125. [ 0.105258] usbcore: registered new interface driver hub
  126. [ 0.105351] usbcore: registered new device driver usb
  127. [ 0.107065] clocksource: Switched to clocksource arch_sys_counter
  128. [ 0.196997] VFS: Disk quotas dquot_6.6.0
  129. [ 0.197107] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  130. [ 0.197291] FS-Cache: Loaded
  131. [ 0.197504] CacheFiles: Loaded
  132. [ 0.207520] NET: Registered protocol family 2
  133. [ 0.208356] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  134. [ 0.208393] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  135. [ 0.208504] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  136. [ 0.208689] TCP: Hash tables configured (established 8192 bind 8192)
  137. [ 0.208824] UDP hash table entries: 512 (order: 2, 16384 bytes)
  138. [ 0.208874] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  139. [ 0.209118] NET: Registered protocol family 1
  140. [ 0.209703] RPC: Registered named UNIX socket transport module.
  141. [ 0.209709] RPC: Registered udp transport module.
  142. [ 0.209715] RPC: Registered tcp transport module.
  143. [ 0.209720] RPC: Registered tcp NFSv4.1 backchannel transport module.
  144. [ 0.211510] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  145. [ 0.214563] Initialise system trusted keyrings
  146. [ 0.214760] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  147. [ 0.224549] FS-Cache: Netfs 'nfs' registered for caching
  148. [ 0.225123] NFS: Registering the id_resolver key type
  149. [ 0.225150] Key type id_resolver registered
  150. [ 0.225156] Key type id_legacy registered
  151. [ 0.225172] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  152. [ 0.227511] Key type asymmetric registered
  153. [ 0.227520] Asymmetric key parser 'x509' registered
  154. [ 0.227572] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  155. [ 0.227726] io scheduler noop registered
  156. [ 0.227734] io scheduler deadline registered (default)
  157. [ 0.227921] io scheduler cfq registered
  158. [ 0.227929] io scheduler mq-deadline registered (default)
  159. [ 0.227936] io scheduler kyber registered
  160. [ 0.231150] bcm2708_fb soc:fb: FB found 1 display(s)
  161. [ 0.289606] Console: switching to colour frame buffer device 240x67
  162. [ 0.324980] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
  163. [ 0.327208] bcm2835-rng 3f104000.rng: hwrng registered
  164. [ 0.327510] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  165. [ 0.328046] vc-sm: Videocore shared memory driver
  166. [ 0.328361] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  167. [ 0.339245] brd: module loaded
  168. [ 0.349860] loop: module loaded
  169. [ 0.350490] Loading iSCSI transport class v2.0-870.
  170. [ 0.351222] libphy: Fixed MDIO Bus: probed
  171. [ 0.351339] usbcore: registered new interface driver lan78xx
  172. [ 0.351398] usbcore: registered new interface driver smsc95xx
  173. [ 0.351416] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  174. [ 0.379272] dwc_otg 3f980000.usb: base=(ptrval)
  175. [ 0.579524] Core Release: 2.80a
  176. [ 0.579534] Setting default values for core params
  177. [ 0.579569] Finished setting default values for core params
  178. [ 0.779871] Using Buffer DMA mode
  179. [ 0.779879] Periodic Transfer Interrupt Enhancement - disabled
  180. [ 0.779884] Multiprocessor Interrupt Enhancement - disabled
  181. [ 0.779892] OTG VER PARAM: 0, OTG VER FLAG: 0
  182. [ 0.779910] Dedicated Tx FIFOs mode
  183. [ 0.780399] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = bad04000 dma = 0xfad04000 len=9024
  184. [ 0.780428] FIQ FSM acceleration enabled for :
  185. Non-periodic Split Transactions
  186. Periodic Split Transactions
  187. High-Speed Isochronous Endpoints
  188. Interrupt/Control Split Transaction hack enabled
  189. [ 0.780436] dwc_otg: Microframe scheduler enabled
  190. [ 0.780492] WARN::hcd_init_fiq:457: FIQ on core 1
  191. [ 0.780503] WARN::hcd_init_fiq:458: FIQ ASM at 8067fd10 length 36
  192. [ 0.780514] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
  193. [ 0.780531] dwc_otg 3f980000.usb: DWC OTG Controller
  194. [ 0.780565] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  195. [ 0.780600] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
  196. [ 0.780652] Init: Port Power? op_state=1
  197. [ 0.780658] Init: Power Port (0)
  198. [ 0.780921] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  199. [ 0.780933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  200. [ 0.780942] usb usb1: Product: DWC OTG Controller
  201. [ 0.780951] usb usb1: Manufacturer: Linux 4.19.97-v7+ dwc_otg_hcd
  202. [ 0.780961] usb usb1: SerialNumber: 3f980000.usb
  203. [ 0.781610] hub 1-0:1.0: USB hub found
  204. [ 0.781654] hub 1-0:1.0: 1 port detected
  205. [ 0.782265] dwc_otg: FIQ enabled
  206. [ 0.782271] dwc_otg: NAK holdoff enabled
  207. [ 0.782277] dwc_otg: FIQ split-transaction FSM enabled
  208. [ 0.782287] Module dwc_common_port init
  209. [ 0.782579] usbcore: registered new interface driver usb-storage
  210. [ 0.782762] mousedev: PS/2 mouse device common for all mice
  211. [ 0.783645] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  212. [ 0.783892] bcm2835-cpufreq: min=600000 max=1200000
  213. [ 0.784369] sdhci: Secure Digital Host Controller Interface driver
  214. [ 0.784375] sdhci: Copyright(c) Pierre Ossman
  215. [ 0.784800] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  216. [ 0.784943] sdhci-pltfm: SDHCI platform and OF driver helper
  217. [ 0.785438] ledtrig-cpu: registered to indicate activity on CPUs
  218. [ 0.785516] hidraw: raw HID events driver (C) Jiri Kosina
  219. [ 0.785694] usbcore: registered new interface driver usbhid
  220. [ 0.785701] usbhid: USB HID core driver
  221. [ 0.786525] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  222. [ 0.788295] [vc_sm_connected_init]: start
  223. [ 0.798128] [vc_sm_connected_init]: end - returning 0
  224. [ 0.799307] Initializing XFRM netlink socket
  225. [ 0.799332] NET: Registered protocol family 17
  226. [ 0.799448] Key type dns_resolver registered
  227. [ 0.800093] Registering SWP/SWPB emulation handler
  228. [ 0.800760] registered taskstats version 1
  229. [ 0.800779] Loading compiled-in X.509 certificates
  230. [ 0.807689] uart-pl011 3f201000.serial: cts_event_workaround enabled
  231. [ 0.807780] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
  232. [ 0.807837] console [ttyAMA0] enabled
  233. [ 0.809867] sdhost: log_buf @ (ptrval) (fad07000)
  234. [ 0.856978] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  235. [ 0.858351] of_cfs_init
  236. [ 0.858532] of_cfs_init: OK
  237. [ 0.859719] Waiting for root device PARTUUID=738a4d67-02...
  238. [ 0.927953] mmc0: new high speed MMC card at address 0001
  239. [ 0.929219] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
  240. [ 0.930090] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
  241. [ 0.930965] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
  242. [ 0.931317] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (246:0)
  243. [ 0.933219] mmcblk0: p1 p2
  244. [ 0.957179] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  245. [ 0.957240] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  246. [ 0.964475] devtmpfs: mounted
  247. [ 0.969603] Freeing unused kernel memory: 1024K
  248. [ 0.997441] Run /sbin/init as init process
  249. [ 0.997563] Indeed it is in host mode hprt0 = 00021501
  250. [ 1.076867] random: fast init done
  251. [ 1.207130] usb 1-1: new high-speed USB device number 2 using dwc_otg
  252. [ 1.207296] Indeed it is in host mode hprt0 = 00001101
  253. [ 1.447480] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
  254. [ 1.447498] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  255. [ 1.448214] hub 1-1:1.0: USB hub found
  256. [ 1.448321] hub 1-1:1.0: 5 ports detected
  257. [ 1.600820] systemd[1]: System time before build time, advancing clock.
  258. [ 1.736110] NET: Registered protocol family 10
  259. [ 1.737589] Segment Routing with IPv6
  260. [ 1.767130] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  261. [ 1.772785] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  262. [ 1.773692] systemd[1]: Detected architecture arm.
  263. [ 1.781882] systemd[1]: Set hostname to <FS20080016H>.
  264. [ 1.897593] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
  265. [ 1.897614] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  266. [ 1.900631] smsc95xx v1.0.6
  267. [ 1.956806] uart-pl011 3f201000.serial: no DMA platform data
  268. [ 1.992550] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b1:78:67
  269. [ 2.097163] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
  270. [ 2.253295] usb 1-1.4: New USB device found, idVendor=060b, idProduct=0540, bcdDevice= 1.09
  271. [ 2.253314] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  272. [ 2.253323] usb 1-1.4: Product: USB Keyboard
  273. [ 2.266526] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:060B:0540.0001/input/input0
  274. [ 2.327748] hid-generic 0003:060B:0540.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-3f980000.usb-1.4/input0
  275. [ 2.363044] input: USB Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:060B:0540.0002/input/input1
  276. [ 2.363457] input: USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:060B:0540.0002/input/input2
  277. [ 2.427394] input: USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:060B:0540.0002/input/input3
  278. [ 2.427600] input: USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:060B:0540.0002/input/input4
  279. [ 2.428037] hid-generic 0003:060B:0540.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [USB Keyboard] on usb-3f980000.usb-1.4/input1
  280. [ 2.734539] random: systemd: uninitialized urandom read (16 bytes read)
  281. [ 2.751549] random: systemd: uninitialized urandom read (16 bytes read)
  282. [ 2.759217] systemd[1]: Listening on Syslog Socket.
  283. [ 2.759862] random: systemd: uninitialized urandom read (16 bytes read)
  284. [ 2.760336] systemd[1]: Listening on udev Kernel Socket.
  285. [ 2.761105] systemd[1]: Listening on Journal Socket.
  286. [ 2.770212] systemd[1]: Mounting RPC Pipe File System...
  287. [ 2.777853] systemd[1]: Starting Restore / save the current clock...
  288. [ 2.785275] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  289. [ 2.786518] systemd[1]: Listening on fsck to fsckd communication Socket.
  290. [ 2.895892] i2c /dev entries driver
  291. [ 3.570059] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  292. [ 3.707369] systemd-journald[105]: Received request to flush runtime journal from PID 1
  293. [ 4.310185] media: Linux media interface: v0.10
  294. [ 4.319295] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  295. [ 4.322048] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  296. [ 4.322066] [vc_sm_connected_init]: start
  297. [ 4.338144] [vc_sm_connected_init]: installed successfully
  298. [ 4.348377] videodev: Linux video capture interface: v2.00
  299. [ 4.382656] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  300. [ 4.384105] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  301. [ 4.401739] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  302. [ 4.415511] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  303. [ 4.437605] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  304. [ 4.437652] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  305. [ 4.444851] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  306. [ 4.444899] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  307. [ 4.461956] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  308. [ 4.461999] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  309. [ 4.514907] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  310. [ 4.531130] bcm2835_audio soc:audio: card created with 8 channels
  311. [ 7.526322] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  312. [ 7.735698] random: crng init done
  313. [ 7.735750] random: 7 urandom warning(s) missed due to ratelimiting
  314. [ 7.800585] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  315. [ 8.009820] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
  316. [ 9.319409] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  317. [ 10.850203] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  318. [ 84.996612] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e300000/pinctrl-names
  319. [ 84.996627] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e300000/pinctrl-0
  320. [ 84.996635] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e300000/bus-width
  321. [ 84.996641] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e300000/brcm,overclock-50
  322. [ 84.996650] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e300000/non-removable
  323. [ 84.996657] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/mmc@7e300000/status
  324. [ 84.997717] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  325. [ 84.997725] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  326. [ 85.045631] i2c-gpio i2c@0: using lines 2 (SDA) and 3 (SCL)
  327. [ 85.062901] mmc1: new high speed SDIO card at address 0001
  328. [ 85.155086] Bluetooth: Core ver 2.22
  329. [ 85.155178] NET: Registered protocol family 31
  330. [ 85.155184] Bluetooth: HCI device and connection manager initialized
  331. [ 85.155202] Bluetooth: HCI socket layer initialized
  332. [ 85.155211] Bluetooth: L2CAP socket layer initialized
  333. [ 85.155239] Bluetooth: SCO socket layer initialized
  334. [ 85.168543] Bluetooth: vendor=0x2df, device=0x9136, class=255, fn=2
  335. [ 85.202149] mwifiex_sdio mmc1:0001:1: WLAN FW already running! Skip FW dnld
  336. [ 85.202159] mwifiex_sdio mmc1:0001:1: WLAN FW is active
  337. [ 95.211137] mwifiex_sdio mmc1:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id = 0xa9, act = 0x0
  338. [ 95.211148] mwifiex_sdio mmc1:0001:1: num_data_h2c_failure = 0
  339. [ 95.211154] mwifiex_sdio mmc1:0001:1: num_cmd_h2c_failure = 0
  340. [ 95.211159] mwifiex_sdio mmc1:0001:1: is_cmd_timedout = 1
  341. [ 95.211164] mwifiex_sdio mmc1:0001:1: num_tx_timeout = 0
  342. [ 95.211169] mwifiex_sdio mmc1:0001:1: last_cmd_index = 1
  343. [ 95.211175] mwifiex_sdio mmc1:0001:1: last_cmd_id: 00 00 a9 00 00 00 00 00 00 00
  344. [ 95.211180] mwifiex_sdio mmc1:0001:1: last_cmd_act: 00 00 00 00 00 00 00 00 00 00
  345. [ 95.211185] mwifiex_sdio mmc1:0001:1: last_cmd_resp_index = 0
  346. [ 95.211190] mwifiex_sdio mmc1:0001:1: last_cmd_resp_id: 00 00 00 00 00 00 00 00 00 00
  347. [ 95.211195] mwifiex_sdio mmc1:0001:1: last_event_index = 0
  348. [ 95.211199] mwifiex_sdio mmc1:0001:1: last_event: 00 00 00 00 00 00 00 00 00 00
  349. [ 95.211204] mwifiex_sdio mmc1:0001:1: data_sent=1 cmd_sent=1
  350. [ 95.211209] mwifiex_sdio mmc1:0001:1: ps_mode=0 ps_state=0
  351. [ 205.497324] Bluetooth: FW failed to be active in time!
  352. [ 205.497339] Bluetooth: Downloading firmware failed!
  353. [ 205.497576] mwifiex_sdio mmc1:0001:1: info: _mwifiex_fw_dpc: unregister device
  354.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!